1 /* 2 * Copyright (c) 2007-2008 The DragonFly Project. All rights reserved. 3 * 4 * This code is derived from software contributed to The DragonFly Project 5 * by Matthew Dillon <dillon@backplane.com> 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in 15 * the documentation and/or other materials provided with the 16 * distribution. 17 * 3. Neither the name of The DragonFly Project nor the names of its 18 * contributors may be used to endorse or promote products derived 19 * from this software without specific, prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 24 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 25 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 26 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING, 27 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 28 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 29 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 31 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 * 34 * $DragonFly: src/sys/vfs/hammer/hammer_transaction.c,v 1.25 2008/09/23 21:03:52 dillon Exp $ 35 */ 36 37 #include "hammer.h" 38 39 static hammer_tid_t hammer_alloc_tid(hammer_mount_t hmp, int count); 40 41 42 /* 43 * Start a standard transaction. 44 */ 45 void 46 hammer_start_transaction(struct hammer_transaction *trans, 47 struct hammer_mount *hmp) 48 { 49 struct timeval tv; 50 int error; 51 52 trans->type = HAMMER_TRANS_STD; 53 trans->hmp = hmp; 54 trans->rootvol = hammer_get_root_volume(hmp, &error); 55 KKASSERT(error == 0); 56 trans->tid = 0; 57 trans->sync_lock_refs = 0; 58 trans->flags = 0; 59 60 getmicrotime(&tv); 61 trans->time = (unsigned long)tv.tv_sec * 1000000ULL + tv.tv_usec; 62 trans->time32 = (u_int32_t)tv.tv_sec; 63 } 64 65 /* 66 * Start a simple read-only transaction. This will not stall. 67 */ 68 void 69 hammer_simple_transaction(struct hammer_transaction *trans, 70 struct hammer_mount *hmp) 71 { 72 struct timeval tv; 73 int error; 74 75 trans->type = HAMMER_TRANS_RO; 76 trans->hmp = hmp; 77 trans->rootvol = hammer_get_root_volume(hmp, &error); 78 KKASSERT(error == 0); 79 trans->tid = 0; 80 trans->sync_lock_refs = 0; 81 trans->flags = 0; 82 83 getmicrotime(&tv); 84 trans->time = (unsigned long)tv.tv_sec * 1000000ULL + tv.tv_usec; 85 trans->time32 = (u_int32_t)tv.tv_sec; 86 } 87 88 /* 89 * Start a transaction using a particular TID. Used by the sync code. 90 * This does not stall. 91 * 92 * This routine may only be called from the flusher thread. We predispose 93 * sync_lock_refs, implying serialization against the synchronization stage 94 * (which the flusher is responsible for). 95 */ 96 void 97 hammer_start_transaction_fls(struct hammer_transaction *trans, 98 struct hammer_mount *hmp) 99 { 100 struct timeval tv; 101 int error; 102 103 bzero(trans, sizeof(*trans)); 104 105 trans->type = HAMMER_TRANS_FLS; 106 trans->hmp = hmp; 107 trans->rootvol = hammer_get_root_volume(hmp, &error); 108 KKASSERT(error == 0); 109 trans->tid = hammer_alloc_tid(hmp, 1); 110 trans->sync_lock_refs = 1; 111 trans->flags = 0; 112 113 getmicrotime(&tv); 114 trans->time = (unsigned long)tv.tv_sec * 1000000ULL + tv.tv_usec; 115 trans->time32 = (u_int32_t)tv.tv_sec; 116 } 117 118 void 119 hammer_done_transaction(struct hammer_transaction *trans) 120 { 121 hammer_mount_t hmp = trans->hmp; 122 int expected_lock_refs; 123 124 hammer_rel_volume(trans->rootvol, 0); 125 trans->rootvol = NULL; 126 expected_lock_refs = (trans->type == HAMMER_TRANS_FLS) ? 1 : 0; 127 KKASSERT(trans->sync_lock_refs == expected_lock_refs); 128 trans->sync_lock_refs = 0; 129 if (trans->type != HAMMER_TRANS_FLS) { 130 if (trans->flags & HAMMER_TRANSF_NEWINODE) 131 hammer_inode_waitreclaims(hmp); 132 else if (trans->flags & HAMMER_TRANSF_DIDIO) 133 hammer_inode_waithard(hmp); 134 } 135 } 136 137 /* 138 * Allocate (count) TIDs. If running in multi-master mode the returned 139 * base will be aligned to a 16-count plus the master id (0-15). 140 * Multi-master mode allows non-conflicting to run and new objects to be 141 * created on multiple masters in parallel. The transaction id identifies 142 * the original master. The object_id is also subject to this rule in 143 * order to allow objects to be created on multiple masters in parallel. 144 * 145 * Directories may pre-allocate a large number of object ids (100,000). 146 * 147 * NOTE: There is no longer a requirement that successive transaction 148 * ids be 2 apart for separator generation. 149 */ 150 static hammer_tid_t 151 hammer_alloc_tid(hammer_mount_t hmp, int count) 152 { 153 hammer_tid_t tid; 154 155 if (hmp->master_id < 0) { 156 tid = hmp->next_tid + 1; 157 hmp->next_tid = tid + count; 158 } else { 159 tid = (hmp->next_tid + HAMMER_MAX_MASTERS) & 160 ~(hammer_tid_t)(HAMMER_MAX_MASTERS - 1); 161 hmp->next_tid = tid + count * HAMMER_MAX_MASTERS; 162 tid |= hmp->master_id; 163 } 164 if (tid >= 0xFFFFFFFFFF000000ULL) 165 panic("hammer_start_transaction: Ran out of TIDs!"); 166 if (hammer_debug_tid) 167 kprintf("alloc_tid %016llx\n", tid); 168 return(tid); 169 } 170 171 /* 172 * Allocate an object id 173 */ 174 hammer_tid_t 175 hammer_alloc_objid(hammer_mount_t hmp, hammer_inode_t dip) 176 { 177 hammer_objid_cache_t ocp; 178 hammer_tid_t tid; 179 180 while ((ocp = dip->objid_cache) == NULL) { 181 if (hmp->objid_cache_count < OBJID_CACHE_SIZE) { 182 ocp = kmalloc(sizeof(*ocp), hmp->m_misc, 183 M_WAITOK|M_ZERO); 184 ocp->next_tid = hammer_alloc_tid(hmp, OBJID_CACHE_BULK); 185 ocp->count = OBJID_CACHE_BULK; 186 TAILQ_INSERT_HEAD(&hmp->objid_cache_list, ocp, entry); 187 ++hmp->objid_cache_count; 188 /* may have blocked, recheck */ 189 if (dip->objid_cache == NULL) { 190 dip->objid_cache = ocp; 191 ocp->dip = dip; 192 } 193 } else { 194 ocp = TAILQ_FIRST(&hmp->objid_cache_list); 195 if (ocp->dip) 196 ocp->dip->objid_cache = NULL; 197 dip->objid_cache = ocp; 198 ocp->dip = dip; 199 } 200 } 201 TAILQ_REMOVE(&hmp->objid_cache_list, ocp, entry); 202 203 /* 204 * The TID is incremented by 1 or by 16 depending what mode the 205 * mount is operating in. 206 */ 207 tid = ocp->next_tid; 208 ocp->next_tid += (hmp->master_id < 0) ? 1 : HAMMER_MAX_MASTERS; 209 210 if (--ocp->count == 0) { 211 dip->objid_cache = NULL; 212 --hmp->objid_cache_count; 213 ocp->dip = NULL; 214 kfree(ocp, hmp->m_misc); 215 } else { 216 TAILQ_INSERT_TAIL(&hmp->objid_cache_list, ocp, entry); 217 } 218 return(tid); 219 } 220 221 void 222 hammer_clear_objid(hammer_inode_t dip) 223 { 224 hammer_objid_cache_t ocp; 225 226 if ((ocp = dip->objid_cache) != NULL) { 227 dip->objid_cache = NULL; 228 ocp->dip = NULL; 229 TAILQ_REMOVE(&dip->hmp->objid_cache_list, ocp, entry); 230 TAILQ_INSERT_HEAD(&dip->hmp->objid_cache_list, ocp, entry); 231 } 232 } 233 234 void 235 hammer_destroy_objid_cache(hammer_mount_t hmp) 236 { 237 hammer_objid_cache_t ocp; 238 239 while ((ocp = TAILQ_FIRST(&hmp->objid_cache_list)) != NULL) { 240 TAILQ_REMOVE(&hmp->objid_cache_list, ocp, entry); 241 if (ocp->dip) 242 ocp->dip->objid_cache = NULL; 243 kfree(ocp, hmp->m_misc); 244 } 245 } 246 247