1 /* 2 * Copyright (c) 2011-2019 The DragonFly Project. All rights reserved. 3 * 4 * This code is derived from software contributed to The DragonFly Project 5 * by Matthew Dillon <dillon@dragonflybsd.org> 6 * by Venkatesh Srinivas <vsrinivas@dragonflybsd.org> 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in 16 * the documentation and/or other materials provided with the 17 * distribution. 18 * 3. Neither the name of The DragonFly Project nor the names of its 19 * contributors may be used to endorse or promote products derived 20 * from this software without specific, prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 23 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 24 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 25 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 26 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 27 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING, 28 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 30 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 31 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 32 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 */ 35 36 #ifndef _VFS_HAMMER2_DISK_H_ 37 #define _VFS_HAMMER2_DISK_H_ 38 39 #ifndef _SYS_UUID_H_ 40 #include <sys/uuid.h> 41 #endif 42 #ifndef _SYS_DMSG_H_ 43 #include <sys/dmsg.h> 44 #endif 45 46 /* 47 * The structures below represent the on-disk media structures for the HAMMER2 48 * filesystem. Note that all fields for on-disk structures are naturally 49 * aligned. The host endian format is typically used - compatibility is 50 * possible if the implementation detects reversed endian and adjusts accesses 51 * accordingly. 52 * 53 * HAMMER2 primarily revolves around the directory topology: inodes, 54 * directory entries, and block tables. Block device buffer cache buffers 55 * are always 64KB. Logical file buffers are typically 16KB. All data 56 * references utilize 64-bit byte offsets. 57 * 58 * Free block management is handled independently using blocks reserved by 59 * the media topology. 60 */ 61 62 /* 63 * The data at the end of a file or directory may be a fragment in order 64 * to optimize storage efficiency. The minimum fragment size is 1KB. 65 * Since allocations are in powers of 2 fragments must also be sized in 66 * powers of 2 (1024, 2048, ... 65536). 67 * 68 * For the moment the maximum allocation size is HAMMER2_PBUFSIZE (64K), 69 * which is 2^16. Larger extents may be supported in the future. Smaller 70 * fragments might be supported in the future (down to 64 bytes is possible), 71 * but probably will not be. 72 * 73 * A full indirect block use supports 512 x 128-byte blockrefs in a 64KB 74 * buffer. Indirect blocks down to 1KB are supported to keep small 75 * directories small. 76 * 77 * A maximally sized file (2^64-1 bytes) requires ~6 indirect block levels 78 * using 64KB indirect blocks (128 byte refs, 512 or radix 9 per indblk). 79 * 80 * 16(datablk) + 9 + 9 + 9 + 9 + 9 + 9 = ~70. 81 * 16(datablk) + 7 + 9 + 9 + 9 + 9 + 9 = ~68. (smaller top level indblk) 82 * 83 * The actual depth depends on copies redundancy and whether the filesystem 84 * has chosen to use a smaller indirect block size at the top level or not. 85 */ 86 #define HAMMER2_ALLOC_MIN 1024 /* minimum allocation size */ 87 #define HAMMER2_RADIX_MIN 10 /* minimum allocation size 2^N */ 88 #define HAMMER2_ALLOC_MAX 65536 /* maximum allocation size */ 89 #define HAMMER2_RADIX_MAX 16 /* maximum allocation size 2^N */ 90 #define HAMMER2_RADIX_KEY 64 /* number of bits in key */ 91 92 /* 93 * HAMMER2_LBUFSIZE - Nominal buffer size for I/O rollups. 94 * 95 * HAMMER2_PBUFSIZE - Topological block size used by files for all 96 * blocks except the block straddling EOF. 97 * 98 * HAMMER2_SEGSIZE - Allocation map segment size, typically 4MB 99 * (space represented by a level0 bitmap). 100 */ 101 102 #define HAMMER2_SEGSIZE (1 << HAMMER2_FREEMAP_LEVEL0_RADIX) 103 #define HAMMER2_SEGRADIX HAMMER2_FREEMAP_LEVEL0_RADIX 104 105 #define HAMMER2_PBUFRADIX 16 /* physical buf (1<<16) bytes */ 106 #define HAMMER2_PBUFSIZE 65536 107 #define HAMMER2_LBUFRADIX 14 /* logical buf (1<<14) bytes */ 108 #define HAMMER2_LBUFSIZE 16384 109 110 #define HAMMER2_IND_BYTES_MIN 4096 111 #define HAMMER2_IND_BYTES_NOM HAMMER2_LBUFSIZE 112 #define HAMMER2_IND_BYTES_MAX HAMMER2_PBUFSIZE 113 #define HAMMER2_IND_RADIX_MIN 12 114 #define HAMMER2_IND_RADIX_NOM HAMMER2_LBUFRADIX 115 #define HAMMER2_IND_RADIX_MAX HAMMER2_PBUFRADIX 116 #define HAMMER2_IND_COUNT_MIN (HAMMER2_IND_BYTES_MIN / \ 117 sizeof(hammer2_blockref_t)) 118 #define HAMMER2_IND_COUNT_MAX (HAMMER2_IND_BYTES_MAX / \ 119 sizeof(hammer2_blockref_t)) 120 121 /* 122 * In HAMMER2, arrays of blockrefs are fully set-associative, meaning that 123 * any element can occur at any index and holes can be anywhere. As a 124 * future optimization we will be able to flag that such arrays are sorted 125 * and thus optimize lookups, but for now we don't. 126 * 127 * Inodes embed either 512 bytes of direct data or an array of 4 blockrefs, 128 * resulting in highly efficient storage for files <= 512 bytes and for files 129 * <= 512KB. Up to 4 directory entries can be referenced from a directory 130 * without requiring an indirect block. 131 */ 132 #define HAMMER2_SET_RADIX 2 /* radix 2 = 4 entries */ 133 #define HAMMER2_SET_COUNT (1 << HAMMER2_SET_RADIX) 134 #define HAMMER2_EMBEDDED_BYTES 512 /* inode blockset/dd size */ 135 #define HAMMER2_EMBEDDED_RADIX 9 136 137 #define HAMMER2_PBUFMASK (HAMMER2_PBUFSIZE - 1) 138 #define HAMMER2_LBUFMASK (HAMMER2_LBUFSIZE - 1) 139 #define HAMMER2_SEGMASK (HAMMER2_SEGSIZE - 1) 140 141 #define HAMMER2_LBUFMASK64 ((hammer2_off_t)HAMMER2_LBUFMASK) 142 #define HAMMER2_PBUFSIZE64 ((hammer2_off_t)HAMMER2_PBUFSIZE) 143 #define HAMMER2_PBUFMASK64 ((hammer2_off_t)HAMMER2_PBUFMASK) 144 #define HAMMER2_SEGSIZE64 ((hammer2_off_t)HAMMER2_SEGSIZE) 145 #define HAMMER2_SEGMASK64 ((hammer2_off_t)HAMMER2_SEGMASK) 146 147 #define HAMMER2_UUID_STRING "5cbb9ad1-862d-11dc-a94d-01301bb8a9f5" 148 149 /* 150 * A 4MB segment is reserved at the beginning of each 1GB. This segment 151 * contains the volume header (or backup volume header), the free block 152 * table, and possibly other information in the future. 153 * 154 * 4MB = 64 x 64K blocks. Each 4MB segment is broken down as follows: 155 * 156 * ========== 157 * 0 volume header (for the first four 2GB zones) 158 * 1 freemap00 level1 FREEMAP_LEAF (256 x 128B bitmap data per 1GB) 159 * 2 level2 FREEMAP_NODE (256 x 128B indirect block per 256GB) 160 * 3 level3 FREEMAP_NODE (256 x 128B indirect block per 64TB) 161 * 4 level4 FREEMAP_NODE (256 x 128B indirect block per 16PB) 162 * 5 level5 FREEMAP_NODE (256 x 128B indirect block per 4EB) 163 * 6 freemap01 level1 (rotation) 164 * 7 level2 165 * 8 level3 166 * 9 level4 167 * 10 level5 168 * 11 freemap02 level1 (rotation) 169 * 12 level2 170 * 13 level3 171 * 14 level4 172 * 15 level5 173 * 16 freemap03 level1 (rotation) 174 * 17 level2 175 * 18 level3 176 * 19 level4 177 * 20 level5 178 * 21 freemap04 level1 (rotation) 179 * 22 level2 180 * 23 level3 181 * 24 level4 182 * 25 level5 183 * 26 freemap05 level1 (rotation) 184 * 27 level2 185 * 28 level3 186 * 29 level4 187 * 30 level5 188 * 31 freemap06 level1 (rotation) 189 * 32 level2 190 * 33 level3 191 * 34 level4 192 * 35 level5 193 * 36 freemap07 level1 (rotation) 194 * 37 level2 195 * 38 level3 196 * 39 level4 197 * 40 level5 198 * 41 unused 199 * .. unused 200 * 63 unused 201 * ========== 202 * 203 * The first four 2GB zones contain volume headers and volume header backups. 204 * After that the volume header block# is reserved for future use. Similarly, 205 * there are many blocks related to various Freemap levels which are not 206 * used in every segment and those are also reserved for future use. 207 * Note that each FREEMAP_LEAF or FREEMAP_NODE uses 32KB out of 64KB slot. 208 * 209 * Freemap (see the FREEMAP document) 210 * 211 * The freemap utilizes blocks #1-40 in 8 sets of 5 blocks. Each block in 212 * a set represents a level of depth in the freemap topology. Eight sets 213 * exist to prevent live updates from disturbing the state of the freemap 214 * were a crash/reboot to occur. That is, a live update is not committed 215 * until the update's flush reaches the volume root. There are FOUR volume 216 * roots representing the last four synchronization points, so the freemap 217 * must be consistent no matter which volume root is chosen by the mount 218 * code. 219 * 220 * Each freemap set is 5 x 64K blocks and represents the 1GB, 256GB, 64TB, 221 * 16PB and 4EB indirect map. The volume header itself has a set of 4 freemap 222 * blockrefs representing another 2 bits, giving us a total 64 bits of 223 * representable address space. 224 * 225 * The Level 0 64KB block represents 1GB of storage represented by 32KB 226 * (256 x struct hammer2_bmap_data). Each structure represents 4MB of storage 227 * and has a 512 bit bitmap, using 2 bits to represent a 16KB chunk of 228 * storage. These 2 bits represent the following states: 229 * 230 * 00 Free 231 * 01 (reserved) (Possibly partially allocated) 232 * 10 Possibly free 233 * 11 Allocated 234 * 235 * One important thing to note here is that the freemap resolution is 16KB, 236 * but the minimum storage allocation size is 1KB. The hammer2 vfs keeps 237 * track of sub-allocations in memory, which means that on a unmount or reboot 238 * the entire 16KB of a partially allocated block will be considered fully 239 * allocated. It is possible for fragmentation to build up over time, but 240 * defragmentation is fairly easy to accomplish since all modifications 241 * allocate a new block. 242 * 243 * The Second thing to note is that due to the way snapshots and inode 244 * replication works, deleting a file cannot immediately free the related 245 * space. Furthermore, deletions often do not bother to traverse the 246 * block subhierarchy being deleted. And to go even further, whole 247 * sub-directory trees can be deleted simply by deleting the directory inode 248 * at the top. So even though we have a symbol to represent a 'possibly free' 249 * block (binary 10), only the bulk free scanning code can actually use it. 250 * Normal 'rm's or other deletions do not. 251 * 252 * WARNING! ZONE_SEG and VOLUME_ALIGN must be a multiple of 1<<LEVEL0_RADIX 253 * (i.e. a multiple of 4MB). VOLUME_ALIGN must be >= ZONE_SEG. 254 * 255 * In Summary: 256 * 257 * (1) Modifications to freemap blocks 'allocate' a new copy (aka use a block 258 * from the next set). The new copy is reused until a flush occurs at 259 * which point the next modification will then rotate to the next set. 260 */ 261 #define HAMMER2_VOLUME_ALIGN (8 * 1024 * 1024) 262 #define HAMMER2_VOLUME_ALIGN64 ((hammer2_off_t)HAMMER2_VOLUME_ALIGN) 263 #define HAMMER2_VOLUME_ALIGNMASK (HAMMER2_VOLUME_ALIGN - 1) 264 #define HAMMER2_VOLUME_ALIGNMASK64 ((hammer2_off_t)HAMMER2_VOLUME_ALIGNMASK) 265 266 #define HAMMER2_NEWFS_ALIGN (HAMMER2_VOLUME_ALIGN) 267 #define HAMMER2_NEWFS_ALIGN64 ((hammer2_off_t)HAMMER2_VOLUME_ALIGN) 268 #define HAMMER2_NEWFS_ALIGNMASK (HAMMER2_VOLUME_ALIGN - 1) 269 #define HAMMER2_NEWFS_ALIGNMASK64 ((hammer2_off_t)HAMMER2_NEWFS_ALIGNMASK) 270 271 #define HAMMER2_ZONE_BYTES64 (2LLU * 1024 * 1024 * 1024) 272 #define HAMMER2_ZONE_MASK64 (HAMMER2_ZONE_BYTES64 - 1) 273 #define HAMMER2_ZONE_SEG (4 * 1024 * 1024) 274 #define HAMMER2_ZONE_SEG64 ((hammer2_off_t)HAMMER2_ZONE_SEG) 275 #define HAMMER2_ZONE_BLOCKS_SEG (HAMMER2_ZONE_SEG / HAMMER2_PBUFSIZE) 276 277 #define HAMMER2_ZONE_FREEMAP_INC 5 /* 5 deep */ 278 279 #define HAMMER2_ZONE_VOLHDR 0 /* volume header or backup */ 280 #define HAMMER2_ZONE_FREEMAP_00 1 /* normal freemap rotation */ 281 #define HAMMER2_ZONE_FREEMAP_01 6 /* normal freemap rotation */ 282 #define HAMMER2_ZONE_FREEMAP_02 11 /* normal freemap rotation */ 283 #define HAMMER2_ZONE_FREEMAP_03 16 /* normal freemap rotation */ 284 #define HAMMER2_ZONE_FREEMAP_04 21 /* normal freemap rotation */ 285 #define HAMMER2_ZONE_FREEMAP_05 26 /* normal freemap rotation */ 286 #define HAMMER2_ZONE_FREEMAP_06 31 /* normal freemap rotation */ 287 #define HAMMER2_ZONE_FREEMAP_07 36 /* normal freemap rotation */ 288 #define HAMMER2_ZONE_FREEMAP_END 41 /* (non-inclusive) */ 289 290 #define HAMMER2_ZONE_UNUSED41 41 291 #define HAMMER2_ZONE_UNUSED42 42 292 #define HAMMER2_ZONE_UNUSED43 43 293 #define HAMMER2_ZONE_UNUSED44 44 294 #define HAMMER2_ZONE_UNUSED45 45 295 #define HAMMER2_ZONE_UNUSED46 46 296 #define HAMMER2_ZONE_UNUSED47 47 297 #define HAMMER2_ZONE_UNUSED48 48 298 #define HAMMER2_ZONE_UNUSED49 49 299 #define HAMMER2_ZONE_UNUSED50 50 300 #define HAMMER2_ZONE_UNUSED51 51 301 #define HAMMER2_ZONE_UNUSED52 52 302 #define HAMMER2_ZONE_UNUSED53 53 303 #define HAMMER2_ZONE_UNUSED54 54 304 #define HAMMER2_ZONE_UNUSED55 55 305 #define HAMMER2_ZONE_UNUSED56 56 306 #define HAMMER2_ZONE_UNUSED57 57 307 #define HAMMER2_ZONE_UNUSED58 58 308 #define HAMMER2_ZONE_UNUSED59 59 309 #define HAMMER2_ZONE_UNUSED60 60 310 #define HAMMER2_ZONE_UNUSED61 61 311 #define HAMMER2_ZONE_UNUSED62 62 312 #define HAMMER2_ZONE_UNUSED63 63 313 #define HAMMER2_ZONE_END 64 /* non-inclusive */ 314 315 #define HAMMER2_NFREEMAPS 8 /* FREEMAP_00 - FREEMAP_07 */ 316 317 /* relative to FREEMAP_x */ 318 #define HAMMER2_ZONEFM_LEVEL1 0 /* 1GB leafmap */ 319 #define HAMMER2_ZONEFM_LEVEL2 1 /* 256GB indmap */ 320 #define HAMMER2_ZONEFM_LEVEL3 2 /* 64TB indmap */ 321 #define HAMMER2_ZONEFM_LEVEL4 3 /* 16PB indmap */ 322 #define HAMMER2_ZONEFM_LEVEL5 4 /* 4EB indmap */ 323 /* LEVEL6 is a set of 4 blockrefs in the volume header 16EB */ 324 325 /* 326 * Freemap radix. Assumes a set-count of 4, 128-byte blockrefs, 327 * 32KB indirect block for freemap (LEVELN_PSIZE below). 328 * 329 * Leaf entry represents 4MB of storage broken down into a 512-bit 330 * bitmap, 2-bits per entry. So course bitmap item represents 16KB. 331 */ 332 #if HAMMER2_SET_COUNT != 4 333 #error "hammer2_disk.h - freemap assumes SET_COUNT is 4" 334 #endif 335 #define HAMMER2_FREEMAP_LEVEL6_RADIX 64 /* 16EB (end) */ 336 #define HAMMER2_FREEMAP_LEVEL5_RADIX 62 /* 4EB */ 337 #define HAMMER2_FREEMAP_LEVEL4_RADIX 54 /* 16PB */ 338 #define HAMMER2_FREEMAP_LEVEL3_RADIX 46 /* 64TB */ 339 #define HAMMER2_FREEMAP_LEVEL2_RADIX 38 /* 256GB */ 340 #define HAMMER2_FREEMAP_LEVEL1_RADIX 30 /* 1GB */ 341 #define HAMMER2_FREEMAP_LEVEL0_RADIX 22 /* 4MB (128by in l-1 leaf) */ 342 343 #define HAMMER2_FREEMAP_LEVELN_PSIZE 32768 /* physical bytes */ 344 345 #define HAMMER2_FREEMAP_LEVEL5_SIZE ((hammer2_off_t)1 << \ 346 HAMMER2_FREEMAP_LEVEL5_RADIX) 347 #define HAMMER2_FREEMAP_LEVEL4_SIZE ((hammer2_off_t)1 << \ 348 HAMMER2_FREEMAP_LEVEL4_RADIX) 349 #define HAMMER2_FREEMAP_LEVEL3_SIZE ((hammer2_off_t)1 << \ 350 HAMMER2_FREEMAP_LEVEL3_RADIX) 351 #define HAMMER2_FREEMAP_LEVEL2_SIZE ((hammer2_off_t)1 << \ 352 HAMMER2_FREEMAP_LEVEL2_RADIX) 353 #define HAMMER2_FREEMAP_LEVEL1_SIZE ((hammer2_off_t)1 << \ 354 HAMMER2_FREEMAP_LEVEL1_RADIX) 355 #define HAMMER2_FREEMAP_LEVEL0_SIZE ((hammer2_off_t)1 << \ 356 HAMMER2_FREEMAP_LEVEL0_RADIX) 357 358 #define HAMMER2_FREEMAP_LEVEL5_MASK (HAMMER2_FREEMAP_LEVEL5_SIZE - 1) 359 #define HAMMER2_FREEMAP_LEVEL4_MASK (HAMMER2_FREEMAP_LEVEL4_SIZE - 1) 360 #define HAMMER2_FREEMAP_LEVEL3_MASK (HAMMER2_FREEMAP_LEVEL3_SIZE - 1) 361 #define HAMMER2_FREEMAP_LEVEL2_MASK (HAMMER2_FREEMAP_LEVEL2_SIZE - 1) 362 #define HAMMER2_FREEMAP_LEVEL1_MASK (HAMMER2_FREEMAP_LEVEL1_SIZE - 1) 363 #define HAMMER2_FREEMAP_LEVEL0_MASK (HAMMER2_FREEMAP_LEVEL0_SIZE - 1) 364 365 #define HAMMER2_FREEMAP_COUNT (int)(HAMMER2_FREEMAP_LEVELN_PSIZE / \ 366 sizeof(hammer2_bmap_data_t)) 367 368 /* 369 * XXX I made a mistake and made the reserved area begin at each LEVEL1 zone, 370 * which is on a 1GB demark. This will eat a little more space but for 371 * now we retain compatibility and make FMZONEBASE every 1GB 372 */ 373 #define H2FMZONEBASE(key) ((key) & ~HAMMER2_FREEMAP_LEVEL1_MASK) 374 #define H2FMBASE(key, radix) rounddown2(key, (hammer2_off_t)1 << (radix)) 375 376 /* 377 * 16KB bitmap granularity (x2 bits per entry). 378 */ 379 #define HAMMER2_FREEMAP_BLOCK_RADIX 14 380 #define HAMMER2_FREEMAP_BLOCK_SIZE (1 << HAMMER2_FREEMAP_BLOCK_RADIX) 381 #define HAMMER2_FREEMAP_BLOCK_MASK (HAMMER2_FREEMAP_BLOCK_SIZE - 1) 382 383 /* 384 * bitmap[] structure. 2 bits per HAMMER2_FREEMAP_BLOCK_SIZE. 385 * 386 * 8 x 64-bit elements, 2 bits per block. 387 * 32 blocks (radix 5) per element. 388 * representing INDEX_SIZE bytes worth of storage per element. 389 */ 390 391 typedef uint64_t hammer2_bitmap_t; 392 393 #define HAMMER2_BMAP_ALLONES ((hammer2_bitmap_t)-1) 394 #define HAMMER2_BMAP_ELEMENTS 8 395 #define HAMMER2_BMAP_BITS_PER_ELEMENT 64 396 #define HAMMER2_BMAP_INDEX_RADIX 5 /* 32 blocks per element */ 397 #define HAMMER2_BMAP_BLOCKS_PER_ELEMENT (1 << HAMMER2_BMAP_INDEX_RADIX) 398 399 #define HAMMER2_BMAP_INDEX_SIZE (HAMMER2_FREEMAP_BLOCK_SIZE * \ 400 HAMMER2_BMAP_BLOCKS_PER_ELEMENT) 401 #define HAMMER2_BMAP_INDEX_MASK (HAMMER2_BMAP_INDEX_SIZE - 1) 402 403 #define HAMMER2_BMAP_SIZE (HAMMER2_BMAP_INDEX_SIZE * \ 404 HAMMER2_BMAP_ELEMENTS) 405 #define HAMMER2_BMAP_MASK (HAMMER2_BMAP_SIZE - 1) 406 407 /* 408 * Two linear areas can be reserved after the initial 4MB segment in the base 409 * zone (the one starting at offset 0). These areas are NOT managed by the 410 * block allocator and do not fall under HAMMER2 crc checking rules based 411 * at the volume header (but can be self-CRCd internally, depending). 412 */ 413 #define HAMMER2_BOOT_MIN_BYTES HAMMER2_VOLUME_ALIGN 414 #define HAMMER2_BOOT_NOM_BYTES (64*1024*1024) 415 #define HAMMER2_BOOT_MAX_BYTES (256*1024*1024) 416 417 #define HAMMER2_AUX_MIN_BYTES HAMMER2_VOLUME_ALIGN 418 #define HAMMER2_AUX_NOM_BYTES (256*1024*1024) 419 #define HAMMER2_AUX_MAX_BYTES (1024*1024*1024) 420 421 /* 422 * Most HAMMER2 types are implemented as unsigned 64-bit integers. 423 * Transaction ids are monotonic. 424 * 425 * We utilize 32-bit iSCSI CRCs. 426 */ 427 typedef uint64_t hammer2_tid_t; 428 typedef uint64_t hammer2_off_t; 429 typedef uint64_t hammer2_key_t; 430 typedef uint32_t hammer2_crc32_t; 431 432 /* 433 * Miscellanious ranges (all are unsigned). 434 */ 435 #define HAMMER2_TID_MIN 1ULL 436 #define HAMMER2_TID_MAX 0xFFFFFFFFFFFFFFFFULL 437 #define HAMMER2_KEY_MIN 0ULL 438 #define HAMMER2_KEY_MAX 0xFFFFFFFFFFFFFFFFULL 439 #define HAMMER2_OFFSET_MIN 0ULL 440 #define HAMMER2_OFFSET_MAX 0xFFFFFFFFFFFFFFFFULL 441 442 /* 443 * HAMMER2 data offset special cases and masking. 444 * 445 * All HAMMER2 data offsets have to be broken down into a 64K buffer base 446 * offset (HAMMER2_OFF_MASK_HI) and a 64K buffer index (HAMMER2_OFF_MASK_LO). 447 * 448 * Indexes into physical buffers are always 64-byte aligned. The low 6 bits 449 * of the data offset field specifies how large the data chunk being pointed 450 * to as a power of 2. The theoretical minimum radix is thus 6 (The space 451 * needed in the low bits of the data offset field). However, the practical 452 * minimum allocation chunk size is 1KB (a radix of 10), so HAMMER2 sets 453 * HAMMER2_RADIX_MIN to 10. The maximum radix is currently 16 (64KB), but 454 * we fully intend to support larger extents in the future. 455 * 456 * WARNING! A radix of 0 (such as when data_off is all 0's) is a special 457 * case which means no data associated with the blockref, and 458 * not the '1 byte' it would otherwise calculate to. 459 */ 460 #define HAMMER2_OFF_MASK 0xFFFFFFFFFFFFFFC0ULL 461 #define HAMMER2_OFF_MASK_LO (HAMMER2_OFF_MASK & HAMMER2_PBUFMASK64) 462 #define HAMMER2_OFF_MASK_HI (~HAMMER2_PBUFMASK64) 463 #define HAMMER2_OFF_MASK_RADIX 0x000000000000003FULL 464 465 /* 466 * HAMMER2 directory support and pre-defined keys 467 */ 468 #define HAMMER2_DIRHASH_VISIBLE 0x8000000000000000ULL 469 #define HAMMER2_DIRHASH_USERMSK 0x7FFFFFFFFFFFFFFFULL 470 #define HAMMER2_DIRHASH_LOMASK 0x0000000000007FFFULL 471 #define HAMMER2_DIRHASH_HIMASK 0xFFFFFFFFFFFF0000ULL 472 #define HAMMER2_DIRHASH_FORCED 0x0000000000008000ULL /* bit forced on */ 473 474 #define HAMMER2_SROOT_KEY 0x0000000000000000ULL /* volume to sroot */ 475 #define HAMMER2_BOOT_KEY 0xd9b36ce135528000ULL /* sroot to BOOT PFS */ 476 477 /************************************************************************ 478 * DMSG SUPPORT * 479 ************************************************************************ 480 * LNK_VOLCONF 481 * 482 * All HAMMER2 directories directly under the super-root on your local 483 * media can be mounted separately, even if they share the same physical 484 * device. 485 * 486 * When you do a HAMMER2 mount you are effectively tying into a HAMMER2 487 * cluster via local media. The local media does not have to participate 488 * in the cluster, other than to provide the hammer2_volconf[] array and 489 * root inode for the mount. 490 * 491 * This is important: The mount device path you specify serves to bootstrap 492 * your entry into the cluster, but your mount will make active connections 493 * to ALL copy elements in the hammer2_volconf[] array which match the 494 * PFSID of the directory in the super-root that you specified. The local 495 * media path does not have to be mentioned in this array but becomes part 496 * of the cluster based on its type and access rights. ALL ELEMENTS ARE 497 * TREATED ACCORDING TO TYPE NO MATTER WHICH ONE YOU MOUNT FROM. 498 * 499 * The actual cluster may be far larger than the elements you list in the 500 * hammer2_volconf[] array. You list only the elements you wish to 501 * directly connect to and you are able to access the rest of the cluster 502 * indirectly through those connections. 503 * 504 * WARNING! This structure must be exactly 128 bytes long for its config 505 * array to fit in the volume header. 506 */ 507 struct hammer2_volconf { 508 uint8_t copyid; /* 00 copyid 0-255 (must match slot) */ 509 uint8_t inprog; /* 01 operation in progress, or 0 */ 510 uint8_t chain_to; /* 02 operation chaining to, or 0 */ 511 uint8_t chain_from; /* 03 operation chaining from, or 0 */ 512 uint16_t flags; /* 04-05 flags field */ 513 uint8_t error; /* 06 last operational error */ 514 uint8_t priority; /* 07 priority and round-robin flag */ 515 uint8_t remote_pfs_type;/* 08 probed direct remote PFS type */ 516 uint8_t reserved08[23]; /* 09-1F */ 517 uuid_t pfs_clid; /* 20-2F copy target must match this uuid */ 518 uint8_t label[16]; /* 30-3F import/export label */ 519 uint8_t path[64]; /* 40-7F target specification string or key */ 520 } __packed; 521 522 typedef struct hammer2_volconf hammer2_volconf_t; 523 524 #define DMSG_VOLF_ENABLED 0x0001 525 #define DMSG_VOLF_INPROG 0x0002 526 #define DMSG_VOLF_CONN_RR 0x80 /* round-robin at same priority */ 527 #define DMSG_VOLF_CONN_EF 0x40 /* media errors flagged */ 528 #define DMSG_VOLF_CONN_PRI 0x0F /* select priority 0-15 (15=best) */ 529 530 struct dmsg_lnk_hammer2_volconf { 531 dmsg_hdr_t head; 532 hammer2_volconf_t copy; /* copy spec */ 533 int32_t index; 534 int32_t unused01; 535 uuid_t mediaid; 536 int64_t reserved02[32]; 537 } __packed; 538 539 typedef struct dmsg_lnk_hammer2_volconf dmsg_lnk_hammer2_volconf_t; 540 541 #define DMSG_LNK_HAMMER2_VOLCONF DMSG_LNK(DMSG_LNK_CMD_HAMMER2_VOLCONF, \ 542 dmsg_lnk_hammer2_volconf) 543 544 #define H2_LNK_VOLCONF(msg) ((dmsg_lnk_hammer2_volconf_t *)(msg)->any.buf) 545 546 /* 547 * HAMMER2 directory entry header (embedded in blockref) exactly 16 bytes 548 */ 549 struct hammer2_dirent_head { 550 hammer2_tid_t inum; /* inode number */ 551 uint16_t namlen; /* name length */ 552 uint8_t type; /* OBJTYPE_* */ 553 uint8_t unused0B; 554 uint8_t unused0C[4]; 555 } __packed; 556 557 typedef struct hammer2_dirent_head hammer2_dirent_head_t; 558 559 /* 560 * The media block reference structure. This forms the core of the HAMMER2 561 * media topology recursion. This 128-byte data structure is embedded in the 562 * volume header, in inodes (which are also directory entries), and in 563 * indirect blocks. 564 * 565 * A blockref references a single media item, which typically can be a 566 * directory entry (aka inode), indirect block, or data block. 567 * 568 * The primary feature a blockref represents is the ability to validate 569 * the entire tree underneath it via its check code. Any modification to 570 * anything propagates up the blockref tree all the way to the root, replacing 571 * the related blocks and compounding the generated check code. 572 * 573 * The check code can be a simple 32-bit iscsi code, a 64-bit crc, or as 574 * complex as a 512 bit cryptographic hash. I originally used a 64-byte 575 * blockref but later expanded it to 128 bytes to be able to support the 576 * larger check code as well as to embed statistics for quota operation. 577 * 578 * Simple check codes are not sufficient for unverified dedup. Even with 579 * a maximally-sized check code unverified dedup should only be used in 580 * in subdirectory trees where you do not need 100% data integrity. 581 * 582 * Unverified dedup is deduping based on meta-data only without verifying 583 * that the data blocks are actually identical. Verified dedup guarantees 584 * integrity but is a far more I/O-expensive operation. 585 * 586 * -- 587 * 588 * mirror_tid - per cluster node modified (propagated upward by flush) 589 * modify_tid - clc record modified (not propagated). 590 * update_tid - clc record updated (propagated upward on verification) 591 * 592 * CLC - Stands for 'Cluster Level Change', identifiers which are identical 593 * within the topology across all cluster nodes (when fully 594 * synchronized). 595 * 596 * NOTE: The range of keys represented by the blockref is (key) to 597 * ((key) + (1LL << keybits) - 1). HAMMER2 usually populates 598 * blocks bottom-up, inserting a new root when radix expansion 599 * is required. 600 * 601 * leaf_count - Helps manage leaf collapse calculations when indirect 602 * blocks become mostly empty. This value caps out at 603 * HAMMER2_BLOCKREF_LEAF_MAX (65535). 604 * 605 * Used by the chain code to determine when to pull leafs up 606 * from nearly empty indirect blocks. For the purposes of this 607 * calculation, BREF_TYPE_INODE is considered a leaf, along 608 * with DIRENT and DATA. 609 * 610 * RESERVED FIELDS 611 * 612 * A number of blockref fields are reserved and should generally be set to 613 * 0 for future compatibility. 614 * 615 * FUTURE BLOCKREF EXPANSION 616 * 617 * CONTENT ADDRESSABLE INDEXING (future) - Using a 256 or 512-bit check code. 618 */ 619 struct hammer2_blockref { /* MUST BE EXACTLY 64 BYTES */ 620 uint8_t type; /* type of underlying item */ 621 uint8_t methods; /* check method & compression method */ 622 uint8_t copyid; /* specify which copy this is */ 623 uint8_t keybits; /* #of keybits masked off 0=leaf */ 624 uint8_t vradix; /* virtual data/meta-data size */ 625 uint8_t flags; /* blockref flags */ 626 uint16_t leaf_count; /* leaf aggregation count */ 627 hammer2_key_t key; /* key specification */ 628 hammer2_tid_t mirror_tid; /* media flush topology & freemap */ 629 hammer2_tid_t modify_tid; /* clc modify (not propagated) */ 630 hammer2_off_t data_off; /* low 6 bits is phys size (radix)*/ 631 hammer2_tid_t update_tid; /* clc modify (propagated upward) */ 632 union { 633 char buf[16]; 634 635 /* 636 * Directory entry header (BREF_TYPE_DIRENT) 637 * 638 * NOTE: check.buf contains filename if <= 64 bytes. Longer 639 * filenames are stored in a data reference of size 640 * HAMMER2_ALLOC_MIN (at least 256, typically 1024). 641 * 642 * NOTE: inode structure may contain a copy of a recently 643 * associated filename, for recovery purposes. 644 * 645 * NOTE: Superroot entries are INODEs, not DIRENTs. Code 646 * allows both cases. 647 */ 648 hammer2_dirent_head_t dirent; 649 650 /* 651 * Statistics aggregation (BREF_TYPE_INODE, BREF_TYPE_INDIRECT) 652 */ 653 struct { 654 hammer2_key_t data_count; 655 hammer2_key_t inode_count; 656 } stats; 657 } embed; 658 union { /* check info */ 659 char buf[64]; 660 struct { 661 uint32_t value; 662 uint32_t reserved[15]; 663 } iscsi32; 664 struct { 665 uint64_t value; 666 uint64_t reserved[7]; 667 } xxhash64; 668 struct { 669 char data[24]; 670 char reserved[40]; 671 } sha192; 672 struct { 673 char data[32]; 674 char reserved[32]; 675 } sha256; 676 struct { 677 char data[64]; 678 } sha512; 679 680 /* 681 * Freemap hints are embedded in addition to the icrc32. 682 * 683 * bigmask - Radixes available for allocation (0-31). 684 * Heuristical (may be permissive but not 685 * restrictive). Typically only radix values 686 * 10-16 are used (i.e. (1<<10) through (1<<16)). 687 * 688 * avail - Total available space remaining, in bytes 689 */ 690 struct { 691 uint32_t icrc32; 692 uint32_t bigmask; /* available radixes */ 693 uint64_t avail; /* total available bytes */ 694 char reserved[48]; 695 } freemap; 696 } check; 697 } __packed; 698 699 typedef struct hammer2_blockref hammer2_blockref_t; 700 701 #define HAMMER2_BLOCKREF_BYTES 128 /* blockref struct in bytes */ 702 #define HAMMER2_BLOCKREF_RADIX 7 703 704 #define HAMMER2_BLOCKREF_LEAF_MAX 65535 705 706 /* 707 * On-media and off-media blockref types. 708 * 709 * types >= 128 are pseudo values that should never be present on-media. 710 */ 711 #define HAMMER2_BREF_TYPE_EMPTY 0 712 #define HAMMER2_BREF_TYPE_INODE 1 713 #define HAMMER2_BREF_TYPE_INDIRECT 2 714 #define HAMMER2_BREF_TYPE_DATA 3 715 #define HAMMER2_BREF_TYPE_DIRENT 4 716 #define HAMMER2_BREF_TYPE_FREEMAP_NODE 5 717 #define HAMMER2_BREF_TYPE_FREEMAP_LEAF 6 718 #define HAMMER2_BREF_TYPE_FREEMAP 254 /* pseudo-type */ 719 #define HAMMER2_BREF_TYPE_VOLUME 255 /* pseudo-type */ 720 721 #define HAMMER2_BREF_FLAG_PFSROOT 0x01 /* see also related opflag */ 722 #define HAMMER2_BREF_FLAG_ZERO 0x02 /* NO LONGER USED */ 723 #define HAMMER2_BREF_FLAG_EMERG_MIP 0x04 /* emerg modified-in-place */ 724 725 /* 726 * Encode/decode check mode and compression mode for 727 * bref.methods. The compression level is not encoded in 728 * bref.methods. 729 */ 730 #define HAMMER2_ENC_CHECK(n) (((n) & 15) << 4) 731 #define HAMMER2_DEC_CHECK(n) (((n) >> 4) & 15) 732 #define HAMMER2_ENC_COMP(n) ((n) & 15) 733 #define HAMMER2_DEC_COMP(n) ((n) & 15) 734 735 #define HAMMER2_CHECK_NONE 0 736 #define HAMMER2_CHECK_DISABLED 1 737 #define HAMMER2_CHECK_ISCSI32 2 738 #define HAMMER2_CHECK_XXHASH64 3 739 #define HAMMER2_CHECK_SHA192 4 740 #define HAMMER2_CHECK_FREEMAP 5 741 742 #define HAMMER2_CHECK_DEFAULT HAMMER2_CHECK_XXHASH64 743 744 /* user-specifiable check modes only */ 745 #define HAMMER2_CHECK_STRINGS { "none", "disabled", "crc32", \ 746 "xxhash64", "sha192" } 747 #define HAMMER2_CHECK_STRINGS_COUNT 5 748 749 /* 750 * Encode/decode check or compression algorithm request in 751 * ipdata->meta.check_algo and ipdata->meta.comp_algo. 752 */ 753 #define HAMMER2_ENC_ALGO(n) (n) 754 #define HAMMER2_DEC_ALGO(n) ((n) & 15) 755 #define HAMMER2_ENC_LEVEL(n) ((n) << 4) 756 #define HAMMER2_DEC_LEVEL(n) (((n) >> 4) & 15) 757 758 #define HAMMER2_COMP_NONE 0 759 #define HAMMER2_COMP_AUTOZERO 1 760 #define HAMMER2_COMP_LZ4 2 761 #define HAMMER2_COMP_ZLIB 3 762 763 #define HAMMER2_COMP_NEWFS_DEFAULT HAMMER2_COMP_LZ4 764 #define HAMMER2_COMP_STRINGS { "none", "autozero", "lz4", "zlib" } 765 #define HAMMER2_COMP_STRINGS_COUNT 4 766 767 /* 768 * Passed to hammer2_chain_create(), causes methods to be inherited from 769 * parent. 770 */ 771 #define HAMMER2_METH_DEFAULT -1 772 773 /* 774 * HAMMER2 block references are collected into sets of 4 blockrefs. These 775 * sets are fully associative, meaning the elements making up a set are 776 * not sorted in any way and may contain duplicate entries, holes, or 777 * entries which shortcut multiple levels of indirection. Sets are used 778 * in various ways: 779 * 780 * (1) When redundancy is desired a set may contain several duplicate 781 * entries pointing to different copies of the same data. Up to 4 copies 782 * are supported. 783 * 784 * (2) The blockrefs in a set can shortcut multiple levels of indirections 785 * within the bounds imposed by the parent of set. 786 * 787 * When a set fills up another level of indirection is inserted, moving 788 * some or all of the set's contents into indirect blocks placed under the 789 * set. This is a top-down approach in that indirect blocks are not created 790 * until the set actually becomes full (that is, the entries in the set can 791 * shortcut the indirect blocks when the set is not full). Depending on how 792 * things are filled multiple indirect blocks will eventually be created. 793 */ 794 struct hammer2_blockset { 795 hammer2_blockref_t blockref[HAMMER2_SET_COUNT]; 796 }; 797 798 typedef struct hammer2_blockset hammer2_blockset_t; 799 800 /* 801 * Catch programmer snafus 802 */ 803 #if (1 << HAMMER2_SET_RADIX) != HAMMER2_SET_COUNT 804 #error "hammer2 direct radix is incorrect" 805 #endif 806 #if (1 << HAMMER2_PBUFRADIX) != HAMMER2_PBUFSIZE 807 #error "HAMMER2_PBUFRADIX and HAMMER2_PBUFSIZE are inconsistent" 808 #endif 809 #if (1 << HAMMER2_RADIX_MIN) != HAMMER2_ALLOC_MIN 810 #error "HAMMER2_RADIX_MIN and HAMMER2_ALLOC_MIN are inconsistent" 811 #endif 812 813 /* 814 * hammer2_bmap_data - A freemap entry in the LEVEL1 block. 815 * 816 * Each 128-byte entry contains the bitmap and meta-data required to manage 817 * a LEVEL0 (4MB) block of storage. The storage is managed in 256 x 16KB 818 * chunks. 819 * 820 * A smaller allocation granularity is supported via a linear iterator and/or 821 * must otherwise be tracked in ram. 822 * 823 * (data structure must be 128 bytes exactly) 824 * 825 * linear - A BYTE linear allocation offset used for sub-16KB allocations 826 * only. May contain values between 0 and 4MB. Must be ignored 827 * if 16KB-aligned (i.e. force bitmap scan), otherwise may be 828 * used to sub-allocate within the 16KB block (which is already 829 * marked as allocated in the bitmap). 830 * 831 * Sub-allocations need only be 1KB-aligned and do not have to be 832 * size-aligned, and 16KB or larger allocations do not update this 833 * field, resulting in pretty good packing. 834 * 835 * Please note that file data granularity may be limited by 836 * other issues such as buffer cache direct-mapping and the 837 * desire to support sector sizes up to 16KB (so H2 only issues 838 * I/O's in multiples of 16KB anyway). 839 * 840 * class - Clustering class. Cleared to 0 only if the entire leaf becomes 841 * free. Used to cluster device buffers so all elements must have 842 * the same device block size, but may mix logical sizes. 843 * 844 * Typically integrated with the blockref type in the upper 8 bits 845 * to localize inodes and indrect blocks, improving bulk free scans 846 * and directory scans. 847 * 848 * bitmap - Two bits per 16KB allocation block arranged in arrays of 849 * 64-bit elements, 256x2 bits representing ~4MB worth of media 850 * storage. Bit patterns are as follows: 851 * 852 * 00 Unallocated 853 * 01 (reserved) 854 * 10 Possibly free 855 * 11 Allocated 856 */ 857 struct hammer2_bmap_data { 858 int32_t linear; /* 00 linear sub-granular allocation offset */ 859 uint16_t class; /* 04-05 clustering class ((type<<8)|radix) */ 860 uint8_t reserved06; /* 06 */ 861 uint8_t reserved07; /* 07 */ 862 uint32_t reserved08; /* 08 */ 863 uint32_t reserved0C; /* 0C */ 864 uint32_t reserved10; /* 10 */ 865 uint32_t reserved14; /* 14 */ 866 uint32_t reserved18; /* 18 */ 867 uint32_t avail; /* 1C */ 868 uint32_t reserved20[8]; /* 20-3F 256 bits manages 128K/1KB/2-bits */ 869 /* 40-7F 512 bits manages 4MB of storage */ 870 hammer2_bitmap_t bitmapq[HAMMER2_BMAP_ELEMENTS]; 871 } __packed; 872 873 typedef struct hammer2_bmap_data hammer2_bmap_data_t; 874 875 /* 876 * The inode number is stored in the inode rather than being 877 * based on the location of the inode (since the location moves every time 878 * the inode or anything underneath the inode is modified). 879 * 880 * The inode is 1024 bytes, made up of 256 bytes of meta-data, 256 bytes 881 * for the filename, and 512 bytes worth of direct file data OR an embedded 882 * blockset. The in-memory hammer2_inode structure contains only the mostly- 883 * node-independent meta-data portion (some flags are node-specific and will 884 * not be synchronized). The rest of the inode is node-specific and chain I/O 885 * is required to obtain it. 886 * 887 * Directories represent one inode per blockref. Inodes are not laid out 888 * as a file but instead are represented by the related blockrefs. The 889 * blockrefs, in turn, are indexed by the 64-bit directory hash key. Remember 890 * that blocksets are fully associative, so a certain degree efficiency is 891 * achieved just from that. 892 * 893 * Up to 512 bytes of direct data can be embedded in an inode, and since 894 * inodes are essentially directory entries this also means that small data 895 * files end up simply being laid out linearly in the directory, resulting 896 * in fewer seeks and highly optimal access. 897 * 898 * The compression mode can be changed at any time in the inode and is 899 * recorded on a blockref-by-blockref basis. 900 */ 901 #define HAMMER2_INODE_BYTES 1024 /* (asserted by code) */ 902 #define HAMMER2_INODE_MAXNAME 256 /* maximum name in bytes */ 903 #define HAMMER2_INODE_VERSION_ONE 1 904 905 #define HAMMER2_INODE_START 1024 /* dynamically allocated */ 906 907 struct hammer2_inode_meta { 908 uint16_t version; /* 0000 inode data version */ 909 uint8_t reserved02; /* 0002 */ 910 uint8_t pfs_subtype; /* 0003 pfs sub-type */ 911 912 /* 913 * core inode attributes, inode type, misc flags 914 */ 915 uint32_t uflags; /* 0004 chflags */ 916 uint32_t rmajor; /* 0008 available for device nodes */ 917 uint32_t rminor; /* 000C available for device nodes */ 918 uint64_t ctime; /* 0010 inode change time */ 919 uint64_t mtime; /* 0018 modified time */ 920 uint64_t atime; /* 0020 access time (unsupported) */ 921 uint64_t btime; /* 0028 birth time */ 922 uuid_t uid; /* 0030 uid / degenerate unix uid */ 923 uuid_t gid; /* 0040 gid / degenerate unix gid */ 924 925 uint8_t type; /* 0050 object type */ 926 uint8_t op_flags; /* 0051 operational flags */ 927 uint16_t cap_flags; /* 0052 capability flags */ 928 uint32_t mode; /* 0054 unix modes (typ low 16 bits) */ 929 930 /* 931 * inode size, identification, localized recursive configuration 932 * for compression and backup copies. 933 * 934 * NOTE: Nominal parent inode number (iparent) is only applicable 935 * for directories but can also help for files during 936 * catastrophic recovery. 937 */ 938 hammer2_tid_t inum; /* 0058 inode number */ 939 hammer2_off_t size; /* 0060 size of file */ 940 uint64_t nlinks; /* 0068 hard links (typ only dirs) */ 941 hammer2_tid_t iparent; /* 0070 nominal parent inum */ 942 hammer2_key_t name_key; /* 0078 full filename key */ 943 uint16_t name_len; /* 0080 filename length */ 944 uint8_t ncopies; /* 0082 ncopies to local media */ 945 uint8_t comp_algo; /* 0083 compression request & algo */ 946 947 /* 948 * These fields are currently only applicable to PFSROOTs. 949 * 950 * NOTE: We can't use {volume_data->fsid, pfs_clid} to uniquely 951 * identify an instance of a PFS in the cluster because 952 * a mount may contain more than one copy of the PFS as 953 * a separate node. {pfs_clid, pfs_fsid} must be used for 954 * registration in the cluster. 955 */ 956 uint8_t target_type; /* 0084 hardlink target type */ 957 uint8_t check_algo; /* 0085 check code request & algo */ 958 uint8_t pfs_nmasters; /* 0086 (if PFSROOT) if multi-master */ 959 uint8_t pfs_type; /* 0087 (if PFSROOT) node type */ 960 hammer2_tid_t pfs_inum; /* 0088 (if PFSROOT) inum allocator */ 961 uuid_t pfs_clid; /* 0090 (if PFSROOT) cluster uuid */ 962 uuid_t pfs_fsid; /* 00A0 (if PFSROOT) unique uuid */ 963 964 /* 965 * Quotas and aggregate sub-tree inode and data counters. Note that 966 * quotas are not replicated downward, they are explicitly set by 967 * the sysop and in-memory structures keep track of inheritance. 968 */ 969 hammer2_key_t data_quota; /* 00B0 subtree quota in bytes */ 970 hammer2_key_t unusedB8; /* 00B8 subtree byte count */ 971 hammer2_key_t inode_quota; /* 00C0 subtree quota inode count */ 972 hammer2_key_t unusedC8; /* 00C8 subtree inode count */ 973 974 /* 975 * The last snapshot tid is tested against modify_tid to determine 976 * when a copy must be made of a data block whos check mode has been 977 * disabled (a disabled check mode allows data blocks to be updated 978 * in place instead of copy-on-write). 979 */ 980 hammer2_tid_t pfs_lsnap_tid; /* 00D0 last snapshot tid */ 981 hammer2_tid_t reservedD8; /* 00D8 (avail) */ 982 983 /* 984 * Tracks (possibly degenerate) free areas covering all sub-tree 985 * allocations under inode, not counting the inode itself. 986 * 0/0 indicates empty entry. fully set-associative. 987 * 988 * (not yet implemented) 989 */ 990 uint64_t decrypt_check; /* 00E0 decryption validator */ 991 hammer2_off_t reservedE0[3]; /* 00E8/F0/F8 */ 992 } __packed; 993 994 typedef struct hammer2_inode_meta hammer2_inode_meta_t; 995 996 struct hammer2_inode_data { 997 hammer2_inode_meta_t meta; /* 0000-00FF */ 998 unsigned char filename[HAMMER2_INODE_MAXNAME]; 999 /* 0100-01FF (256 char, unterminated) */ 1000 union { /* 0200-03FF (64x8 = 512 bytes) */ 1001 hammer2_blockset_t blockset; 1002 char data[HAMMER2_EMBEDDED_BYTES]; 1003 } u; 1004 } __packed; 1005 1006 typedef struct hammer2_inode_data hammer2_inode_data_t; 1007 1008 #define HAMMER2_OPFLAG_DIRECTDATA 0x01 1009 #define HAMMER2_OPFLAG_PFSROOT 0x02 /* (see also bref flag) */ 1010 #define HAMMER2_OPFLAG_COPYIDS 0x04 /* copyids override parent */ 1011 1012 #define HAMMER2_OBJTYPE_UNKNOWN 0 1013 #define HAMMER2_OBJTYPE_DIRECTORY 1 1014 #define HAMMER2_OBJTYPE_REGFILE 2 1015 #define HAMMER2_OBJTYPE_FIFO 4 1016 #define HAMMER2_OBJTYPE_CDEV 5 1017 #define HAMMER2_OBJTYPE_BDEV 6 1018 #define HAMMER2_OBJTYPE_SOFTLINK 7 1019 #define HAMMER2_OBJTYPE_UNUSED08 8 1020 #define HAMMER2_OBJTYPE_SOCKET 9 1021 #define HAMMER2_OBJTYPE_WHITEOUT 10 1022 1023 #define HAMMER2_COPYID_NONE 0 1024 #define HAMMER2_COPYID_LOCAL ((uint8_t)-1) 1025 1026 #define HAMMER2_COPYID_COUNT 256 1027 1028 /* 1029 * PFS types identify the role of a PFS within a cluster. The PFS types 1030 * is stored on media and in LNK_SPAN messages and used in other places. 1031 * 1032 * The low 4 bits specify the current active type while the high 4 bits 1033 * specify the transition target if the PFS is being upgraded or downgraded, 1034 * If the upper 4 bits are not zero it may effect how a PFS is used during 1035 * the transition. 1036 * 1037 * Generally speaking, downgrading a MASTER to a SLAVE cannot complete until 1038 * at least all MASTERs have updated their pfs_nmasters field. And upgrading 1039 * a SLAVE to a MASTER cannot complete until the new prospective master has 1040 * been fully synchronized (though theoretically full synchronization is 1041 * not required if a (new) quorum of other masters are fully synchronized). 1042 * 1043 * It generally does not matter which PFS element you actually mount, you 1044 * are mounting 'the cluster'. So, for example, a network mount will mount 1045 * a DUMMY PFS type on a memory filesystem. However, there are two exceptions. 1046 * In order to gain the benefits of a SOFT_MASTER or SOFT_SLAVE, those PFSs 1047 * must be directly mounted. 1048 */ 1049 #define HAMMER2_PFSTYPE_NONE 0x00 1050 #define HAMMER2_PFSTYPE_CACHE 0x01 1051 #define HAMMER2_PFSTYPE_UNUSED02 0x02 1052 #define HAMMER2_PFSTYPE_SLAVE 0x03 1053 #define HAMMER2_PFSTYPE_SOFT_SLAVE 0x04 1054 #define HAMMER2_PFSTYPE_SOFT_MASTER 0x05 1055 #define HAMMER2_PFSTYPE_MASTER 0x06 1056 #define HAMMER2_PFSTYPE_UNUSED07 0x07 1057 #define HAMMER2_PFSTYPE_SUPROOT 0x08 1058 #define HAMMER2_PFSTYPE_DUMMY 0x09 1059 #define HAMMER2_PFSTYPE_MAX 16 1060 1061 #define HAMMER2_PFSTRAN_NONE 0x00 /* no transition in progress */ 1062 #define HAMMER2_PFSTRAN_CACHE 0x10 1063 #define HAMMER2_PFSTRAN_UNMUSED20 0x20 1064 #define HAMMER2_PFSTRAN_SLAVE 0x30 1065 #define HAMMER2_PFSTRAN_SOFT_SLAVE 0x40 1066 #define HAMMER2_PFSTRAN_SOFT_MASTER 0x50 1067 #define HAMMER2_PFSTRAN_MASTER 0x60 1068 #define HAMMER2_PFSTRAN_UNUSED70 0x70 1069 #define HAMMER2_PFSTRAN_SUPROOT 0x80 1070 #define HAMMER2_PFSTRAN_DUMMY 0x90 1071 1072 #define HAMMER2_PFS_DEC(n) ((n) & 0x0F) 1073 #define HAMMER2_PFS_DEC_TRANSITION(n) (((n) >> 4) & 0x0F) 1074 #define HAMMER2_PFS_ENC_TRANSITION(n) (((n) & 0x0F) << 4) 1075 1076 #define HAMMER2_PFSSUBTYPE_NONE 0 1077 #define HAMMER2_PFSSUBTYPE_SNAPSHOT 1 /* manual/managed snapshot */ 1078 #define HAMMER2_PFSSUBTYPE_AUTOSNAP 2 /* automatic snapshot */ 1079 1080 /* 1081 * PFS mode of operation is a bitmask. This is typically not stored 1082 * on-media, but defined here because the field may be used in dmsgs. 1083 */ 1084 #define HAMMER2_PFSMODE_QUORUM 0x01 1085 #define HAMMER2_PFSMODE_RW 0x02 1086 1087 /* 1088 * The volume header eats a 64K block at the beginning of each 2GB zone 1089 * up to four copies. 1090 * 1091 * All information is stored in host byte order. The volume header's magic 1092 * number may be checked to determine the byte order. If you wish to mount 1093 * between machines w/ different endian modes you'll need filesystem code 1094 * which acts on the media data consistently (either all one way or all the 1095 * other). Our code currently does not do that. 1096 * 1097 * A read-write mount may have to recover missing allocations by doing an 1098 * incremental mirror scan looking for modifications made after alloc_tid. 1099 * If alloc_tid == last_tid then no recovery operation is needed. Recovery 1100 * operations are usually very, very fast. 1101 * 1102 * Read-only mounts do not need to do any recovery, access to the filesystem 1103 * topology is always consistent after a crash (is always consistent, period). 1104 * However, there may be shortcutted blockref updates present from deep in 1105 * the tree which are stored in the volumeh eader and must be tracked on 1106 * the fly. 1107 * 1108 * NOTE: The copyinfo[] array contains the configuration for both the 1109 * cluster connections and any local media copies. The volume 1110 * header will be replicated for each local media copy. 1111 * 1112 * The mount command may specify multiple medias or just one and 1113 * allow HAMMER2 to pick up the others when it checks the copyinfo[] 1114 * array on mount. 1115 * 1116 * NOTE: sroot_blockset points to the super-root directory, not the root 1117 * directory. The root directory will be a subdirectory under the 1118 * super-root. 1119 * 1120 * The super-root directory contains all root directories and all 1121 * snapshots (readonly or writable). It is possible to do a 1122 * null-mount of the super-root using special path constructions 1123 * relative to your mounted root. 1124 */ 1125 #define HAMMER2_VOLUME_ID_HBO 0x48414d3205172011LLU 1126 #define HAMMER2_VOLUME_ID_ABO 0x11201705324d4148LLU 1127 1128 struct hammer2_volume_data { 1129 /* 1130 * sector #0 - 512 bytes 1131 */ 1132 uint64_t magic; /* 0000 Signature */ 1133 hammer2_off_t boot_beg; /* 0008 Boot area (future) */ 1134 hammer2_off_t boot_end; /* 0010 (size = end - beg) */ 1135 hammer2_off_t aux_beg; /* 0018 Aux area (future) */ 1136 hammer2_off_t aux_end; /* 0020 (size = end - beg) */ 1137 hammer2_off_t volu_size; /* 0028 Volume size, bytes */ 1138 1139 uint32_t version; /* 0030 */ 1140 uint32_t flags; /* 0034 */ 1141 uint8_t copyid; /* 0038 copyid of phys vol */ 1142 uint8_t freemap_version; /* 0039 freemap algorithm */ 1143 uint8_t peer_type; /* 003A HAMMER2_PEER_xxx */ 1144 uint8_t reserved003B; /* 003B */ 1145 uint32_t reserved003C; /* 003C */ 1146 1147 uuid_t fsid; /* 0040 */ 1148 uuid_t fstype; /* 0050 */ 1149 1150 /* 1151 * allocator_size is precalculated at newfs time and does not include 1152 * reserved blocks, boot, or aux areas. 1153 * 1154 * Initial non-reserved-area allocations do not use the freemap 1155 * but instead adjust alloc_iterator. Dynamic allocations take 1156 * over starting at (allocator_beg). This makes newfs_hammer2's 1157 * job a lot easier and can also serve as a testing jig. 1158 */ 1159 hammer2_off_t allocator_size; /* 0060 Total data space */ 1160 hammer2_off_t allocator_free; /* 0068 Free space */ 1161 hammer2_off_t allocator_beg; /* 0070 Initial allocations */ 1162 1163 /* 1164 * mirror_tid reflects the highest committed change for this 1165 * block device regardless of whether it is to the super-root 1166 * or to a PFS or whatever. 1167 * 1168 * freemap_tid reflects the highest committed freemap change for 1169 * this block device. 1170 */ 1171 hammer2_tid_t mirror_tid; /* 0078 committed tid (vol) */ 1172 hammer2_tid_t reserved0080; /* 0080 */ 1173 hammer2_tid_t reserved0088; /* 0088 */ 1174 hammer2_tid_t freemap_tid; /* 0090 committed tid (fmap) */ 1175 hammer2_tid_t bulkfree_tid; /* 0098 bulkfree incremental */ 1176 hammer2_tid_t reserved00A0[5]; /* 00A0-00C7 */ 1177 1178 /* 1179 * Copyids are allocated dynamically from the copyexists bitmap. 1180 * An id from the active copies set (up to 8, see copyinfo later on) 1181 * may still exist after the copy set has been removed from the 1182 * volume header and its bit will remain active in the bitmap and 1183 * cannot be reused until it is 100% removed from the hierarchy. 1184 */ 1185 uint32_t copyexists[8]; /* 00C8-00E7 copy exists bmap */ 1186 char reserved0140[248]; /* 00E8-01DF */ 1187 1188 /* 1189 * 32 bit CRC array at the end of the first 512 byte sector. 1190 * 1191 * icrc_sects[7] - First 512-4 bytes of volume header (including all 1192 * the other icrc's except this one). 1193 * 1194 * icrc_sects[6] - Sector 1 (512 bytes) of volume header, which is 1195 * the blockset for the root. 1196 * 1197 * icrc_sects[5] - Sector 2 1198 * icrc_sects[4] - Sector 3 1199 * icrc_sects[3] - Sector 4 (the freemap blockset) 1200 */ 1201 hammer2_crc32_t icrc_sects[8]; /* 01E0-01FF */ 1202 1203 /* 1204 * sector #1 - 512 bytes 1205 * 1206 * The entire sector is used by a blockset. 1207 */ 1208 hammer2_blockset_t sroot_blockset; /* 0200-03FF Superroot dir */ 1209 1210 /* 1211 * sector #2-7 1212 */ 1213 char sector2[512]; /* 0400-05FF reserved */ 1214 char sector3[512]; /* 0600-07FF reserved */ 1215 hammer2_blockset_t freemap_blockset; /* 0800-09FF freemap */ 1216 char sector5[512]; /* 0A00-0BFF reserved */ 1217 char sector6[512]; /* 0C00-0DFF reserved */ 1218 char sector7[512]; /* 0E00-0FFF reserved */ 1219 1220 /* 1221 * sector #8-71 - 32768 bytes 1222 * 1223 * Contains the configuration for up to 256 copyinfo targets. These 1224 * specify local and remote copies operating as masters or slaves. 1225 * copyid's 0 and 255 are reserved (0 indicates an empty slot and 255 1226 * indicates the local media). 1227 * 1228 * Each inode contains a set of up to 8 copyids, either inherited 1229 * from its parent or explicitly specified in the inode, which 1230 * indexes into this array. 1231 */ 1232 /* 1000-8FFF copyinfo config */ 1233 hammer2_volconf_t copyinfo[HAMMER2_COPYID_COUNT]; 1234 1235 /* 1236 * Remaining sections are reserved for future use. 1237 */ 1238 char reserved0400[0x6FFC]; /* 9000-FFFB reserved */ 1239 1240 /* 1241 * icrc on entire volume header 1242 */ 1243 hammer2_crc32_t icrc_volheader; /* FFFC-FFFF full volume icrc*/ 1244 } __packed; 1245 1246 typedef struct hammer2_volume_data hammer2_volume_data_t; 1247 1248 /* 1249 * Various parts of the volume header have their own iCRCs. 1250 * 1251 * The first 512 bytes has its own iCRC stored at the end of the 512 bytes 1252 * and not included the icrc calculation. 1253 * 1254 * The second 512 bytes also has its own iCRC but it is stored in the first 1255 * 512 bytes so it covers the entire second 512 bytes. 1256 * 1257 * The whole volume block (64KB) has an iCRC covering all but the last 4 bytes, 1258 * which is where the iCRC for the whole volume is stored. This is currently 1259 * a catch-all for anything not individually iCRCd. 1260 */ 1261 #define HAMMER2_VOL_ICRC_SECT0 7 1262 #define HAMMER2_VOL_ICRC_SECT1 6 1263 1264 #define HAMMER2_VOLUME_BYTES 65536 1265 1266 #define HAMMER2_VOLUME_ICRC0_OFF 0 1267 #define HAMMER2_VOLUME_ICRC1_OFF 512 1268 #define HAMMER2_VOLUME_ICRCVH_OFF 0 1269 1270 #define HAMMER2_VOLUME_ICRC0_SIZE (512 - 4) 1271 #define HAMMER2_VOLUME_ICRC1_SIZE (512) 1272 #define HAMMER2_VOLUME_ICRCVH_SIZE (65536 - 4) 1273 1274 #define HAMMER2_VOL_VERSION_MIN 1 1275 #define HAMMER2_VOL_VERSION_DEFAULT 1 1276 #define HAMMER2_VOL_VERSION_WIP 2 1277 1278 #define HAMMER2_NUM_VOLHDRS 4 1279 1280 union hammer2_media_data { 1281 hammer2_volume_data_t voldata; 1282 hammer2_inode_data_t ipdata; 1283 hammer2_blockset_t blkset; 1284 hammer2_blockref_t npdata[HAMMER2_IND_COUNT_MAX]; 1285 hammer2_bmap_data_t bmdata[HAMMER2_FREEMAP_COUNT]; 1286 char buf[HAMMER2_PBUFSIZE]; 1287 } __packed; 1288 1289 typedef union hammer2_media_data hammer2_media_data_t; 1290 1291 #endif /* !_VFS_HAMMER2_DISK_H_ */ 1292