1#! /bin/sh 2# 3# Setup an ap that accepts wds traffic from associated stations. 4# This can be used as the "back end" for setup.extender and/or 5# setup.repeater. Note that the wds vap's are created by the 6# wlanwds program that listens for wds discovery events (to create 7# wds vaps) and for sta leave events (to destroy wds vaps it 8# created). The WDSUP script is invoked for each wds vap that 9# gets created--to add the vap to a bridge. 10# 11# $FreeBSD: src/tools/tools/net80211/scripts/setup.wdsmain,v 1.2 2009/04/15 22:11:04 sam Exp $ 12# 13PATH=.:$PATH 14. config 15 16SSID='freebsd+wdsmain' 17WDSUP=$TMPDIR/wdsup$$ 18 19#mwldebug state+node+reset+xmit+recv+beacon+hal+hal2 20WLAN_AP=`ifconfig wlan create wlanmode hostap wlandev $WIRELESS` 21ifconfig $WLAN_AP ssid "$SSID" channel $CHANNEL mtu 1500 22ifconfig $WLAN_AP dwds -apbridge 23wlandebug -i $WLAN_AP state+scan+assoc+auth+wds+11n 24 25BRIDGE=`ifconfig bridge create` 26 27# NB: start wlanwds first to avoid races. 28rm -f $WDSUP 29cat >$WDSUP <<EOF 30#! /bin/sh 31DEV=\$1 32ifconfig $BRIDGE addm \$DEV 33ifconfig \$DEV up 34EOF 35chmod +x $WDSUP 36$WLANWDS -v -s $WDSUP & 37 38ifconfig $BRIDGE addm $WLAN_AP addm $WIRED up 39ifconfig $WIRED up 40ifconfig $WLAN_AP up 41