usr.bin/dsynth/dsynth.1

.\"
.\" Copyright (c) 2021 The DragonFly Project.  All rights reserved.
.\"
.\" This code is derived from software contributed to The DragonFly Project
.\" by Matthew Dillon <dillon@backplane.com>
.\" This code is based on a concept originally developed by John R. Marino.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\"
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in
.\"    the documentation and/or other materials provided with the
.\"    distribution.
.\" 3. Neither the name of The DragonFly Project nor the names of its
.\"    contributors may be used to endorse or promote products derived
.\"    from this software without specific, prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
.\" LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
.\" FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
.\" COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
.\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
.\" AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
.\" OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
.\" OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.Dd August 21, 2021
.Dt DSYNTH 1
.Os
.Sh NAME
.Nm dsynth
.Nd dsynth bulk dports builder utility
.Sh SYNOPSIS
.Nm
.Op Fl dhvxyDNPS
.Op Fl p Ar profile
.Op Fl s Ar n
.Op Fl m Ar gb
.Op Fl M Ar scale
.Ar directive
.Op origins
.Nm
.Ar help
.Sh DESCRIPTION
The
.Nm
utility allows a user to build and maintain part or all of dports
locally.
.Nm
figures out the dependency topology of the dport(s) for you and
is capable of building any number of ports concurrently based
on the configuration parameters you supply.
.Pp
also detects changes made to the ports tree and rebuilds packages
and anything that depends on those packages as needed.
.Pp
.Nm
is based on an application called
.Xr synth 1
which was written by John Marino in Ada and served as the conceptual base
for this program.
.Nm
is written in C and designed to be as portable as possible given a
ports-style infrastructure.
.Pp
Our recommended build topology is with a configuration as follows:
.Bd -literal
[Global Configuration]
profile_selected= LiveSystem

[LiveSystem]
Operating_system= DragonFly
Directory_packages= /build/synth/live_packages
Directory_repository= /build/synth/live_packages/All
Directory_portsdir= /build/synth/dports
Directory_options= /build/synth/options
Directory_distfiles= /build/synth/distfiles
Directory_buildbase= /build/synth/build
Directory_logs= /build/synth/logs
Directory_ccache= disabled
Directory_system= /
Package_suffix= .txz
; Meta_version= 2	(this is the default)
; Check_plist= false	(this is the default)
Number_of_builders= 8
Max_jobs_per_builder= 8
Display_with_ncurses= true
.Ed
.Pp
This places all major directories under
.Pa /build/synth .
If you want to use the same dports and the same distfiles as your base
system, you can null-mount /usr/distfiles onto /build/synth/distfiles
and /usr/dports onto /build/synth/dports with
.Pa /etc/fstab
entries as follows:
.Bd -literal
# Device              Mountpoint		FStype  Options DumpPass#
/usr/distfiles        /build/synth/distfiles	null    rw      4 4
/usr/dports           /build/synth/dports	null    rw      4 4
.Ed
.Pp
Please set the number of builders and the maximum number of jobs per
builder according to available system resources.
Remember that the total
load on the system can be as high as (builders x jobs), and at least 4x
that value in processes.
Systems are typically restricted by memory and CPU horsepower.
Start conservative and ramp up according to what your system can handle.
A good rule of thumb is to set workers to the number of CPU threads your
machine has or to 1/2 the number of gigabytes of memory your system has,
whichever is lower.
Then set the jobs per worker to no more than the
number of CPU threads your machine has.
.Pp
.Nm
has numerous features to manage machine load and swap usage to
prevent a machine from being overloaded, allowing more workers
to be configured than you might otherwise think is reasonable
(which helps a lot when building the smaller ports).
However, users running this program should be aware that very high loads
and modest swap use are still likely to develop when building a large
number of ports or when building very large ports like chromium.
If the system is not dedicated to building packages you can reduce the
impact to the rest of the system by running
.Nm
at nice +20 and also by reducing the number of workers and number of
jobs per worker somewhat.
.Pp
We recommend that a minimum of 64GB of SSD-based swap be configured,
or twice as much swap as main memory, whichever is the higher value.
.Pp
We recommend a minimum of 500GB of storage be configured in
.Pa /build
or wherever you have configured various directories.
A full set of distfiles requires at least 120GB, a full dports including
the git repo requires at least 1.5GB, and a full set of built packages
requires at least 75GB.
If using a filesystem such as HAMMER or HAMMER2
which frees space overnight, double all of those numbers.
.Pp
The actual build infrastructure uses tmpfs... memory and swap, and does
not use regular filesystem space.
.Sh OPTIONS
.Bl -tag -width indent
.It Fl d[d...]
Run in debug mode.
If specified two or more times this will turn off
ncurses and output the primary log (00_last_results.log) to the standard
output, along with additional spew.
.It Fl h
Quickly output a synopsis of options and directives and exit.
.It Fl m Ar gb
Override the default package dependency memory target, in gigabytes.
The default is 1/2 physical memory.
The number of workers will be limited
such that the aggregate size of package dependencies installed in each
worker slot does not exceed this value.
.Pp
This handles a well-known effect where the sheer amount of data that has
to be installed in tmpfs filesystems for large ports, when multiplied by
the number of worker slots, can force excessive paging to occur and leave
preciously little memory available to actually run compiles.
Some paging
is necessary to maintain maximum CPU utilization, but excessive paging
can cause the whole machine to essentially become idle for extended
periods of time.
.It Fl M Ar scale
Override dynamic workers calculation by a specific scale factor.
Specifying 1.0 leaves it unchanged, 0.8 will reduce the number of jobs by
20%, and 1.2 will increase the number of jobs by 20%.  And so forth.
.Pp
This option may be specified in the range 0.01 to 99.0.  Out of range values
will simply be clipped.
.It Fl p Ar profile
Override the global profile default in
.Pa /etc/dsynth/dsynth.ini ,
allowing you to trivially run whatever profile you like without having to
edit the configuration file when switching.
In addition, you can now run any number of dsynth's concurrently on the same
machine without having to use a jail, each with a different profile,
as long as the packages, repository, buildbase, and logs directories
are different.
.Pp
Note that the distfiles directory can be shared and will not conflict
or get confused with concurrent fetches.
.It Fl s Ar n
.Nm
usually slow-starts the worker slots, beginning with one slot and increasing
by one every 5 seconds until the maximum configured number of workers is
reached.
This gives
.Nm
a slower ramp that it can load manage against.
Specifying 0 disables the slow-start feature and the maximum number of
worker slots (limited by the dependency graph) will be loaded immediately.
.It Fl v
Quickly output the version and exit.
.It Fl x
.It Fl xx
Normally dsynth builds a package for any of three reasons: (1) If the contents
of the ports directory changes, (2) If anything the port depends on requires
rebuilding so to will the port be rebuilt, (3) If there is no binary package
already built for the port.
.Pp
If this option is specified, the first test is ignored.
If this option is specified twice, the first and second tests are ignored.
.It Fl y
Automatically answer 'y'es to any questions.
.It Fl D
Turn on DEVELOPER mode when building ports.
.It Fl P
Include the check-plist stage.
This is the default for the
.Cm everything
and
.Cm test
directives.
This feature may also be turned on via the
.Va Check_plist
option in the configuration file.
.It Fl S[S]
Turn off curses for script friendliness.
The output will be log 00 and
should be redirected to /dev/null or something similar.
If you supply the options twice, color output escapes will also be
turned off.
You may also wish to use the
.Fl y
option for scripting dsynth.
.It Fl N
Normally
.Nm
nices its sub-processes to +10.
This option disables the feature.
.El
.Sh DIRECTIVES
Generally
.Nm
is run with a directive and some directives allow a list of ports to be
specified.
This list should be space-delimited in DIR/SUBDIR format, for example:
.Ar www/chromium .
For directives with an optional ports list, your current installed set
of ports will be used if you do not specify a list.  You may also
specify a filename instead of a port to have dsynth read the ports list
from a text file.  Ports are specified by dports directory and subdirectory.
For example "www/chromium".
.Bl -tag -width indent
.It Cm init
Creates and initializes the
.Pa /etc/dsynth
directory if it does not exist.
This directive will complain and exit if either
.Pa /etc/dsynth
or
.Pa /usr/local/etc/dsynth
exists.
It will not create
.Pa /etc/dsynth
in this situation.
.It Cm status
This will do a dry-run of
.Cm upgrade-system
but not actually build anything.
.It Cm cleanup
This will clean up any left-over mounts from prior builds.
.Nm
attempts to clean up all processes and mounts when you interrupt
a build but doesn't always succeed.
.It Cm configure
NOT CURRENTLY IMPLEMENTED
.It Cm fetch-only Op Ar ports/everything
Fetch all source distributions required to build
the specified target.  Specifying 'everything' fetches
all source distributions required to build the whole
of dports.
.Pp
Any existing distfiles which do not match the expected
signature will be re-fetched.
.It Cm upgrade-system
NOT CURRENTLY IMPLEMENTED.
Incrementally build and upgrade your locally
installed packages, then upgrade your local system with them.
.It Cm list-system
Write a build list to the file "build.txt".  Do not build anything.
This is typically used on your target system to generate a list for
dsynth to use as a build list on another system.
.It Cm prepare-system
Incrementally build and upgrade your locally installed packages, but
do not upgrade your system with them.
.It Cm rebuild-repository
Build or rebuild the database files for the configured repository.
.It Cm purge-distfiles
Delete any obsolete source distribution files.
.It Cm reset-db
Delete ports_crc.db from the build directory.
This database is used to detect changes made to the dports tree.
It will be regenerated on your next build without forcing any packages to be rebuilt.
.It Cm status-everything
This will do a dry-run of a full bulk build of everything,
but not actually build anything.
.It Cm everything
This will build the entire dports tree and then rebuild the repository
when it finishes.
.It Cm version
This is for synth compatibility.
The version of
.Nm
will be printed and the program will exit.
.It Cm help
Output a synopsis of options and directives and exit.
.It Cm status Op Ar ports
Do a dry-run with 'build' of the given list.
.It Cm add Op Ar ports
This directive may be used when the user wishes to add additional
ports to an existing dsynth run without interrupting and restarting
the dsynth.
It can be useful when the user intends to leave dsynth unattended for
a long period of time and does not wish to interrupt potentially very
long builds that are already in progress.
.Pp
When dsynth completes the current run it will re-exec itself with
the same primary directive along with all ports specified by any
.Cm add
directives made in the interim.
.Nm
will still rebuild the repository after the initial run if it would
normally have done so, but if so it will do it without asking first.
Only the last rebuild request will potentially be interactive.
.Pp
Note that interrupting or killing the running dsynth cleans out any
ports that might have been added while it was running.  This directive
also has numerous exit/exec lock-file races and is intended to only be used
manually by the user.
.It Cm build Op Ar ports
Incrementally build dports based on the given list.
When done, ask whether the repository should be rebuilt or not.
.It Cm just-build Op Ar ports
Incrementally build dports based on the given list, then
exits.
No post-build steps will be taken.
.It Cm install Op Ar ports
NOT CURRENTLY IMPLEMENTED.  'build' based on the supplied
list (or using currently installed packages), then rebuild
the repository and upgrade the system without asking any further
questions.
.It Cm force Op Ar ports
This is the same as 'build' but will delete existing packages first.
Dependencies are not deleted unless they are out of date.
.It Cm test Op Ar ports
This is the same as 'build' but sets the environment variable
.Ev DEVELOPER
to
.Sq yes
and pre-deletes specified packages.
Dependencies are not deleted unless they are out of date.
.It Cm debug Op Ar ports
This is the same as 'build' but leaves the chroot mounts intact
upon completion.
.It Cm monitor Op Ar datfile
Monitors a running dsynth instance.
.El
.Sh HOOKS
.Nm
provides several hooks that trigger at specific stages during the
package building process.
.Pp
At the moment hooks are not configurable so the exact executable file is
expected in the configuration directory with one of the names in the
list below.
Hooks are run via
.Xr execve 2 .
.Bl -tag -width indent
.It Pa hook_run_start
This hook triggers when the overall build process starts.
.It Pa hook_run_end
This hook is called when the overall build process ends.
.It Pa hook_pkg_success
For each successful port built this hook will trigger.
.It Pa hook_pkg_failure
This hook will trigger for each port that fails to build.
.It Pa hook_pkg_ignored
Each port that is marked as ignored will make this hook to trigger.
.It Pa hook_pkg_skipped
Each skipped port will trigger this hook.
.El
.Pp
A number of environment variables are available for hooks, always in the context
of an ongoing build and within a specific configuration profile, unless
overridden from the command-line.
Some are only available for a specific hook.
.Bl -tag -width DIR_REPOSITORY
.It Ev PROFILE
The configuration profile.
.It Ev DIR_PACKAGES
The packages base directory, i.e where index files are generated.
.It Ev DIR_REPOSITORY
The packages repository, where the actual package files are stored.
.It Ev DIR_PORTS
The ports directory.
.It Ev DIR_OPTIONS
The options directory.
.It Ev DIR_DISTFILES
The distfiles directory, where the distribution files are stored.
.It Ev DIR_LOGS
The logs directory, which is also where the html Report is generated.
.It Ev DIR_BUILDBASE
The build base directory.
.It Ev PORTS_QUEUED
The number of ports queued to be built (only for
.Pa hook_run_start ) .
.It Ev PORTS_BUILT
The number of successfully built ports (only for
.Pa hook_run_end ) .
.It Ev PORTS_FAILED
The number of ports for which the build failed (only for
.Pa hook_run_end ) .
.It Ev PORTS_IGNORED
The number of ports that where ignored and, hence, not built
(only for
.Pa hook_run_end ) .
.It Ev PORTS_SKIPPED
The number of ports that were skipped in the build (only for
.Pa hook_run_end ) .
.It Ev RESULT
The result (success, failure, ignored, skipped) for the build of an individual
port (only for
.Pa hook_pkg_* ) .
.It Ev ORIGIN
The origin of a port (only for
.Pa hook_pkg_* ) .
.It Ev FLAVOR
The flavor of a port (only for
.Pa hook_pkg_* ) .
.It Ev PKGNAME
The port name (only for
.Pa hook_pkg_* ) .
.El
.Sh MISC
.Pp
The default setting for
.Va Meta_version
is now 2.  You can override it with this configuration variable.
.Pp
The default setting for
.Va Check_plist
is false.  You can override it with the
.Fl P
option or by setting this configuration variable to true.
.Sh FILES
.Bl -tag -width ".It Pa <fs>/abc/defghi/<name>" -compact
.It Pa /etc/dsynth/dsynth.ini
The primary configuration file.
If not found,
.Nm
will also look in
.Pa /usr/local/etc/dsynth/dsynth.ini .
.Pp
.It Pa /etc/dsynth/LiveSystem-make.conf
Typically contains the environment variables that will be set in
the workers.
.Nm
firewalls the environment it is run under from the environment it
provides to the workers.
.Pp
.It Pa /build/synth/build
Recommended setting for
.Va Directory_buildbase ,
contains the build infrastructure... typically a template, mirrored
system directories, and mount points for all the worker slots.
The template will be [re]generated if 'pkg' needs to be built or
if the
.Pa .template.good
file in this directory is deleted.
.Pp
.It Pa /build/synth/distfiles
Recommended setting for
.Va Directory_distfiles ,
ports to a directory into which
.Nm
will download any source distribution files required for building.
.Pp
.It Pa /build/synth/dports
Recommended setting for
.Va Directory_portsdir ,
points to a checked out dports repo.
Note that
.Nm
does not automatically 'git pull' or otherwise synchronize the dports repo,
you must do that yourself prior to starting a build.
.Pp
.It Pa /build/synth/live_packages
Recommended setting for
.Va Directory_packages ,
points to a directory which will contain the completed application
packages.
.Pp
.It Pa /build/synth/logs
Recommended setting for
.Va Directory_logs ,
all log files will be placed in this directory.
Special management logfiles begin with the numeral '0' for easily
location.
The logfiles for ports while and after building are stored in the
form subdir____portname.log, with three underscores.
.Pp
.It Pa /build/synth/options
Recommended setting for
.Va Directory_options ,
where options overrides for specific ports may be located.
.Pp
.It Pa /
Recommended setting for
.Va Directory_system ,
which
.Nm
uses as a basis for creating the jails or chroots in each worker slot
during building.
No part of the system root is ever NULL-mounted read-write... it is always
NULL-mounted read-only.
Some elements from the system base will be mirrored in the build-base
as an optimization.
.Pp
Note that the packages directory and the distfiles directory is mounted
read-write in jails or chroots.
All other r/w filesystems in the workers are
.Xr tmpfs 5
based filesystems and will be created and torn-down for each port.
.Pp
.It Pa .txz
.It Pa .tgz
.It Pa .tar
.It Pa .tbz
.It Pa .tzst
The recommended setting for
.Va Package_suffix
is either
.Pa .txz
or
.Pa .tgz .
Use
.Pa .txz
for better compression at the cost of somewhat slower bulk builds due
to the time overhead for compression and decompression, or
use
.Pa .tgz
for modest compression and very fast compression and decompression.
Due to the way the builder works, package dependencies are fresly
installed into the chroot slot for each package being built, so
decompression time matters.
.Pp
.El
.Sh EXIT STATUS
.Ex -std
.Sh SEE ALSO
.Xr synth 1 ,
.Xr dports 7
.Sh HISTORY
The
.Nm
utility first appeared in
.Dx 5.7 .
.Sh AUTHORS
.An Matthew Dillon Aq Mt dillon@backplane.com