xref: /freebsd/contrib/bmake/parse.c (revision d0b2dbfa)
1 /*	$NetBSD: parse.c,v 1.704 2023/06/23 06:08:56 rillig Exp $	*/
2 
3 /*
4  * Copyright (c) 1988, 1989, 1990, 1993
5  *	The Regents of the University of California.  All rights reserved.
6  *
7  * This code is derived from software contributed to Berkeley by
8  * Adam de Boor.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. Neither the name of the University nor the names of its contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  */
34 
35 /*
36  * Copyright (c) 1989 by Berkeley Softworks
37  * All rights reserved.
38  *
39  * This code is derived from software contributed to Berkeley by
40  * Adam de Boor.
41  *
42  * Redistribution and use in source and binary forms, with or without
43  * modification, are permitted provided that the following conditions
44  * are met:
45  * 1. Redistributions of source code must retain the above copyright
46  *    notice, this list of conditions and the following disclaimer.
47  * 2. Redistributions in binary form must reproduce the above copyright
48  *    notice, this list of conditions and the following disclaimer in the
49  *    documentation and/or other materials provided with the distribution.
50  * 3. All advertising materials mentioning features or use of this software
51  *    must display the following acknowledgement:
52  *	This product includes software developed by the University of
53  *	California, Berkeley and its contributors.
54  * 4. Neither the name of the University nor the names of its contributors
55  *    may be used to endorse or promote products derived from this software
56  *    without specific prior written permission.
57  *
58  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
59  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
60  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
61  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
62  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
63  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
64  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
65  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
66  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
67  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
68  * SUCH DAMAGE.
69  */
70 
71 /*
72  * Parsing of makefiles.
73  *
74  * Parse_File is the main entry point and controls most of the other
75  * functions in this module.
76  *
77  * Interface:
78  *	Parse_Init	Initialize the module
79  *
80  *	Parse_End	Clean up the module
81  *
82  *	Parse_File	Parse a top-level makefile.  Included files are
83  *			handled by IncludeFile instead.
84  *
85  *	Parse_VarAssign
86  *			Try to parse the given line as a variable assignment.
87  *			Used by MainParseArgs to determine if an argument is
88  *			a target or a variable assignment.  Used internally
89  *			for pretty much the same thing.
90  *
91  *	Parse_Error	Report a parse error, a warning or an informational
92  *			message.
93  *
94  *	Parse_MainName	Populate the list of targets to create.
95  */
96 
97 #include <sys/types.h>
98 #include <sys/stat.h>
99 #include <errno.h>
100 #include <stdarg.h>
101 
102 #include "make.h"
103 
104 #ifdef HAVE_STDINT_H
105 #include <stdint.h>
106 #endif
107 
108 #ifdef HAVE_MMAP
109 #include <sys/mman.h>
110 
111 #ifndef MAP_COPY
112 #define MAP_COPY MAP_PRIVATE
113 #endif
114 #ifndef MAP_FILE
115 #define MAP_FILE 0
116 #endif
117 #endif
118 
119 #include "dir.h"
120 #include "job.h"
121 #include "pathnames.h"
122 
123 /*	"@(#)parse.c	8.3 (Berkeley) 3/19/94"	*/
124 MAKE_RCSID("$NetBSD: parse.c,v 1.704 2023/06/23 06:08:56 rillig Exp $");
125 
126 /* Detects a multiple-inclusion guard in a makefile. */
127 typedef enum {
128 	GS_START,		/* at the beginning of the file */
129 	GS_COND,		/* after the guard condition */
130 	GS_DONE,		/* after the closing .endif */
131 	GS_NO			/* the file is not guarded */
132 } GuardState;
133 
134 /*
135  * A file being read.
136  */
137 typedef struct IncludedFile {
138 	FStr name;		/* absolute or relative to the cwd */
139 	unsigned lineno;	/* 1-based */
140 	unsigned readLines;	/* the number of physical lines that have
141 				 * been read from the file */
142 	unsigned forHeadLineno;	/* 1-based */
143 	unsigned forBodyReadLines; /* the number of physical lines that have
144 				 * been read from the file above the body of
145 				 * the .for loop */
146 	unsigned int condMinDepth; /* depth of nested 'if' directives, at the
147 				 * beginning of the file */
148 	bool depending;		/* state of doing_depend on EOF */
149 
150 	Buffer buf;		/* the file's content or the body of the .for
151 				 * loop; either empty or ends with '\n' */
152 	char *buf_ptr;		/* next char to be read from buf */
153 	char *buf_end;		/* buf_end[-1] == '\n' */
154 
155 	GuardState guardState;
156 	Guard *guard;
157 
158 	struct ForLoop *forLoop;
159 } IncludedFile;
160 
161 /* Special attributes for target nodes. */
162 typedef enum ParseSpecial {
163 	SP_ATTRIBUTE,	/* Generic attribute */
164 	SP_BEGIN,	/* .BEGIN */
165 	SP_DEFAULT,	/* .DEFAULT */
166 	SP_DELETE_ON_ERROR, /* .DELETE_ON_ERROR */
167 	SP_END,		/* .END */
168 	SP_ERROR,	/* .ERROR */
169 	SP_IGNORE,	/* .IGNORE */
170 	SP_INCLUDES,	/* .INCLUDES; not mentioned in the manual page */
171 	SP_INTERRUPT,	/* .INTERRUPT */
172 	SP_LIBS,	/* .LIBS; not mentioned in the manual page */
173 	SP_MAIN,	/* .MAIN and no user-specified targets to make */
174 	SP_META,	/* .META */
175 	SP_MFLAGS,	/* .MFLAGS or .MAKEFLAGS */
176 	SP_NOMETA,	/* .NOMETA */
177 	SP_NOMETA_CMP,	/* .NOMETA_CMP */
178 	SP_NOPATH,	/* .NOPATH */
179 	SP_NOREADONLY,	/* .NOREADONLY */
180 	SP_NOT,		/* Not special */
181 	SP_NOTPARALLEL,	/* .NOTPARALLEL or .NO_PARALLEL */
182 	SP_NULL,	/* .NULL; not mentioned in the manual page */
183 	SP_OBJDIR,	/* .OBJDIR */
184 	SP_ORDER,	/* .ORDER */
185 	SP_PARALLEL,	/* .PARALLEL; not mentioned in the manual page */
186 	SP_PATH,	/* .PATH or .PATH.suffix */
187 	SP_PHONY,	/* .PHONY */
188 #ifdef POSIX
189 	SP_POSIX,	/* .POSIX; not mentioned in the manual page */
190 #endif
191 	SP_PRECIOUS,	/* .PRECIOUS */
192 	SP_READONLY,	/* .READONLY */
193 	SP_SHELL,	/* .SHELL */
194 	SP_SILENT,	/* .SILENT */
195 	SP_SINGLESHELL,	/* .SINGLESHELL; not mentioned in the manual page */
196 	SP_STALE,	/* .STALE */
197 	SP_SUFFIXES,	/* .SUFFIXES */
198 	SP_SYSPATH,	/* .SYSPATH */
199 	SP_WAIT		/* .WAIT */
200 } ParseSpecial;
201 
202 typedef List SearchPathList;
203 typedef ListNode SearchPathListNode;
204 
205 
206 typedef enum VarAssignOp {
207 	VAR_NORMAL,		/* = */
208 	VAR_APPEND,		/* += */
209 	VAR_DEFAULT,		/* ?= */
210 	VAR_SUBST,		/* := */
211 	VAR_SHELL		/* != or :sh= */
212 } VarAssignOp;
213 
214 typedef struct VarAssign {
215 	char *varname;		/* unexpanded */
216 	VarAssignOp op;
217 	const char *value;	/* unexpanded */
218 } VarAssign;
219 
220 static bool Parse_IsVar(const char *, VarAssign *);
221 static void Parse_Var(VarAssign *, GNode *);
222 
223 /*
224  * The target to be made if no targets are specified in the command line.
225  * This is the first target defined in any of the makefiles.
226  */
227 GNode *mainNode;
228 
229 /*
230  * During parsing, the targets from the left-hand side of the currently
231  * active dependency line, or NULL if the current line does not belong to a
232  * dependency line, for example because it is a variable assignment.
233  *
234  * See unit-tests/deptgt.mk, keyword "parse.c:targets".
235  */
236 static GNodeList *targets;
237 
238 #ifdef CLEANUP
239 /*
240  * All shell commands for all targets, in no particular order and possibly
241  * with duplicates.  Kept in a separate list since the commands from .USE or
242  * .USEBEFORE nodes are shared with other GNodes, thereby giving up the
243  * easily understandable ownership over the allocated strings.
244  */
245 static StringList targCmds = LST_INIT;
246 #endif
247 
248 /*
249  * Predecessor node for handling .ORDER. Initialized to NULL when .ORDER
250  * is seen, then set to each successive source on the line.
251  */
252 static GNode *order_pred;
253 
254 static int parseErrors = 0;
255 
256 /*
257  * The include chain of makefiles.  At index 0 is the top-level makefile from
258  * the command line, followed by the included files or .for loops, up to and
259  * including the current file.
260  *
261  * See PrintStackTrace for how to interpret the data.
262  */
263 static Vector /* of IncludedFile */ includes;
264 
265 SearchPath *parseIncPath;	/* directories for "..." includes */
266 SearchPath *sysIncPath;		/* directories for <...> includes */
267 SearchPath *defSysIncPath;	/* default for sysIncPath */
268 
269 /*
270  * The parseKeywords table is searched using binary search when deciding
271  * if a target or source is special.
272  */
273 static const struct {
274 	const char name[17];
275 	ParseSpecial special;	/* when used as a target */
276 	GNodeType targetAttr;	/* when used as a source */
277 } parseKeywords[] = {
278     { ".BEGIN",		SP_BEGIN,	OP_NONE },
279     { ".DEFAULT",	SP_DEFAULT,	OP_NONE },
280     { ".DELETE_ON_ERROR", SP_DELETE_ON_ERROR, OP_NONE },
281     { ".END",		SP_END,		OP_NONE },
282     { ".ERROR",		SP_ERROR,	OP_NONE },
283     { ".EXEC",		SP_ATTRIBUTE,	OP_EXEC },
284     { ".IGNORE",	SP_IGNORE,	OP_IGNORE },
285     { ".INCLUDES",	SP_INCLUDES,	OP_NONE },
286     { ".INTERRUPT",	SP_INTERRUPT,	OP_NONE },
287     { ".INVISIBLE",	SP_ATTRIBUTE,	OP_INVISIBLE },
288     { ".JOIN",		SP_ATTRIBUTE,	OP_JOIN },
289     { ".LIBS",		SP_LIBS,	OP_NONE },
290     { ".MADE",		SP_ATTRIBUTE,	OP_MADE },
291     { ".MAIN",		SP_MAIN,	OP_NONE },
292     { ".MAKE",		SP_ATTRIBUTE,	OP_MAKE },
293     { ".MAKEFLAGS",	SP_MFLAGS,	OP_NONE },
294     { ".META",		SP_META,	OP_META },
295     { ".MFLAGS",	SP_MFLAGS,	OP_NONE },
296     { ".NOMETA",	SP_NOMETA,	OP_NOMETA },
297     { ".NOMETA_CMP",	SP_NOMETA_CMP,	OP_NOMETA_CMP },
298     { ".NOPATH",	SP_NOPATH,	OP_NOPATH },
299     { ".NOREADONLY",	SP_NOREADONLY,	OP_NONE },
300     { ".NOTMAIN",	SP_ATTRIBUTE,	OP_NOTMAIN },
301     { ".NOTPARALLEL",	SP_NOTPARALLEL,	OP_NONE },
302     { ".NO_PARALLEL",	SP_NOTPARALLEL,	OP_NONE },
303     { ".NULL",		SP_NULL,	OP_NONE },
304     { ".OBJDIR",	SP_OBJDIR,	OP_NONE },
305     { ".OPTIONAL",	SP_ATTRIBUTE,	OP_OPTIONAL },
306     { ".ORDER",		SP_ORDER,	OP_NONE },
307     { ".PARALLEL",	SP_PARALLEL,	OP_NONE },
308     { ".PATH",		SP_PATH,	OP_NONE },
309     { ".PHONY",		SP_PHONY,	OP_PHONY },
310 #ifdef POSIX
311     { ".POSIX",		SP_POSIX,	OP_NONE },
312 #endif
313     { ".PRECIOUS",	SP_PRECIOUS,	OP_PRECIOUS },
314     { ".READONLY",	SP_READONLY,	OP_NONE },
315     { ".RECURSIVE",	SP_ATTRIBUTE,	OP_MAKE },
316     { ".SHELL",		SP_SHELL,	OP_NONE },
317     { ".SILENT",	SP_SILENT,	OP_SILENT },
318     { ".SINGLESHELL",	SP_SINGLESHELL,	OP_NONE },
319     { ".STALE",		SP_STALE,	OP_NONE },
320     { ".SUFFIXES",	SP_SUFFIXES,	OP_NONE },
321     { ".SYSPATH",	SP_SYSPATH,	OP_NONE },
322     { ".USE",		SP_ATTRIBUTE,	OP_USE },
323     { ".USEBEFORE",	SP_ATTRIBUTE,	OP_USEBEFORE },
324     { ".WAIT",		SP_WAIT,	OP_NONE },
325 };
326 
327 enum PosixState posix_state = PS_NOT_YET;
328 
329 static HashTable /* full file name -> Guard */ guards;
330 
331 static IncludedFile *
332 GetInclude(size_t i)
333 {
334 	assert(i < includes.len);
335 	return Vector_Get(&includes, i);
336 }
337 
338 /* The makefile that is currently being read. */
339 static IncludedFile *
340 CurFile(void)
341 {
342 	return GetInclude(includes.len - 1);
343 }
344 
345 unsigned int
346 CurFile_CondMinDepth(void)
347 {
348 	return CurFile()->condMinDepth;
349 }
350 
351 static Buffer
352 LoadFile(const char *path, int fd)
353 {
354 	ssize_t n;
355 	Buffer buf;
356 	size_t bufSize;
357 	struct stat st;
358 
359 	bufSize = fstat(fd, &st) == 0 && S_ISREG(st.st_mode) &&
360 		  st.st_size > 0 && st.st_size < 1024 * 1024 * 1024
361 	    ? (size_t)st.st_size : 1024;
362 	Buf_InitSize(&buf, bufSize);
363 
364 	for (;;) {
365 		if (buf.len == buf.cap) {
366 			if (buf.cap >= 512 * 1024 * 1024) {
367 				Error("%s: file too large", path);
368 				exit(2); /* Not 1 so -q can distinguish error */
369 			}
370 			Buf_Expand(&buf);
371 		}
372 		assert(buf.len < buf.cap);
373 		n = read(fd, buf.data + buf.len, buf.cap - buf.len);
374 		if (n < 0) {
375 			Error("%s: read error: %s", path, strerror(errno));
376 			exit(2);	/* Not 1 so -q can distinguish error */
377 		}
378 		if (n == 0)
379 			break;
380 
381 		buf.len += (size_t)n;
382 	}
383 	assert(buf.len <= buf.cap);
384 
385 	if (!Buf_EndsWith(&buf, '\n'))
386 		Buf_AddByte(&buf, '\n');
387 
388 	return buf;		/* may not be null-terminated */
389 }
390 
391 /*
392  * Print the current chain of .include and .for directives.  In Parse_Fatal
393  * or other functions that already print the location, includingInnermost
394  * would be redundant, but in other cases like Error or Fatal it needs to be
395  * included.
396  */
397 void
398 PrintStackTrace(bool includingInnermost)
399 {
400 	const IncludedFile *entries;
401 	size_t i, n;
402 
403 	n = includes.len;
404 	if (n == 0)
405 		return;
406 
407 	entries = GetInclude(0);
408 	if (!includingInnermost && entries[n - 1].forLoop == NULL)
409 		n--;		/* already in the diagnostic */
410 
411 	for (i = n; i-- > 0;) {
412 		const IncludedFile *entry = entries + i;
413 		const char *fname = entry->name.str;
414 		char dirbuf[MAXPATHLEN + 1];
415 
416 		if (fname[0] != '/' && strcmp(fname, "(stdin)") != 0) {
417 			const char *realPath = realpath(fname, dirbuf);
418 			if (realPath != NULL)
419 				fname = realPath;
420 		}
421 
422 		if (entry->forLoop != NULL) {
423 			char *details = ForLoop_Details(entry->forLoop);
424 			debug_printf("\tin .for loop from %s:%u with %s\n",
425 			    fname, entry->forHeadLineno, details);
426 			free(details);
427 		} else if (i + 1 < n && entries[i + 1].forLoop != NULL) {
428 			/* entry->lineno is not a useful line number */
429 		} else
430 			debug_printf("\tin %s:%u\n", fname, entry->lineno);
431 	}
432 }
433 
434 /* Check if the current character is escaped on the current line. */
435 static bool
436 IsEscaped(const char *line, const char *p)
437 {
438 	bool escaped = false;
439 	while (p > line && *--p == '\\')
440 		escaped = !escaped;
441 	return escaped;
442 }
443 
444 /*
445  * Add the filename and lineno to the GNode so that we remember where its
446  * last command was added or where it was mentioned in a .depend file.
447  */
448 static void
449 RememberLocation(GNode *gn)
450 {
451 	IncludedFile *curFile = CurFile();
452 	gn->fname = Str_Intern(curFile->name.str);
453 	gn->lineno = curFile->lineno;
454 }
455 
456 /*
457  * Look in the table of keywords for one matching the given string.
458  * Return the index of the keyword, or -1 if it isn't there.
459  */
460 static int
461 FindKeyword(const char *str)
462 {
463 	int start = 0;
464 	int end = sizeof parseKeywords / sizeof parseKeywords[0] - 1;
465 
466 	while (start <= end) {
467 		int curr = start + (end - start) / 2;
468 		int diff = strcmp(str, parseKeywords[curr].name);
469 
470 		if (diff == 0)
471 			return curr;
472 		if (diff < 0)
473 			end = curr - 1;
474 		else
475 			start = curr + 1;
476 	}
477 
478 	return -1;
479 }
480 
481 void
482 PrintLocation(FILE *f, bool useVars, const GNode *gn)
483 {
484 	char dirbuf[MAXPATHLEN + 1];
485 	FStr dir, base;
486 	const char *fname;
487 	unsigned lineno;
488 
489 	if (gn != NULL) {
490 		fname = gn->fname;
491 		lineno = gn->lineno;
492 	} else if (includes.len > 0) {
493 		IncludedFile *curFile = CurFile();
494 		fname = curFile->name.str;
495 		lineno = curFile->lineno;
496 	} else
497 		return;
498 
499 	if (!useVars || fname[0] == '/' || strcmp(fname, "(stdin)") == 0) {
500 		(void)fprintf(f, "\"%s\" line %u: ", fname, lineno);
501 		return;
502 	}
503 
504 	dir = Var_Value(SCOPE_GLOBAL, ".PARSEDIR");
505 	if (dir.str == NULL)
506 		dir.str = ".";
507 	if (dir.str[0] != '/')
508 		dir.str = realpath(dir.str, dirbuf);
509 
510 	base = Var_Value(SCOPE_GLOBAL, ".PARSEFILE");
511 	if (base.str == NULL)
512 		base.str = str_basename(fname);
513 
514 	(void)fprintf(f, "\"%s/%s\" line %u: ", dir.str, base.str, lineno);
515 
516 	FStr_Done(&base);
517 	FStr_Done(&dir);
518 }
519 
520 static void MAKE_ATTR_PRINTFLIKE(5, 0)
521 ParseVErrorInternal(FILE *f, bool useVars, const GNode *gn,
522 		    ParseErrorLevel level, const char *fmt, va_list ap)
523 {
524 	static bool fatal_warning_error_printed = false;
525 
526 	(void)fprintf(f, "%s: ", progname);
527 
528 	PrintLocation(f, useVars, gn);
529 	if (level == PARSE_WARNING)
530 		(void)fprintf(f, "warning: ");
531 	(void)vfprintf(f, fmt, ap);
532 	(void)fprintf(f, "\n");
533 	(void)fflush(f);
534 
535 	if (level == PARSE_FATAL)
536 		parseErrors++;
537 	if (level == PARSE_WARNING && opts.parseWarnFatal) {
538 		if (!fatal_warning_error_printed) {
539 			Error("parsing warnings being treated as errors");
540 			fatal_warning_error_printed = true;
541 		}
542 		parseErrors++;
543 	}
544 
545 	if (DEBUG(PARSE))
546 		PrintStackTrace(false);
547 }
548 
549 static void MAKE_ATTR_PRINTFLIKE(3, 4)
550 ParseErrorInternal(const GNode *gn,
551 		   ParseErrorLevel level, const char *fmt, ...)
552 {
553 	va_list ap;
554 
555 	(void)fflush(stdout);
556 	va_start(ap, fmt);
557 	ParseVErrorInternal(stderr, false, gn, level, fmt, ap);
558 	va_end(ap);
559 
560 	if (opts.debug_file != stdout && opts.debug_file != stderr) {
561 		va_start(ap, fmt);
562 		ParseVErrorInternal(opts.debug_file, false, gn,
563 		    level, fmt, ap);
564 		va_end(ap);
565 	}
566 }
567 
568 /*
569  * Print a parse error message, including location information.
570  *
571  * If the level is PARSE_FATAL, continue parsing until the end of the
572  * current top-level makefile, then exit (see Parse_File).
573  *
574  * Fmt is given without a trailing newline.
575  */
576 void
577 Parse_Error(ParseErrorLevel level, const char *fmt, ...)
578 {
579 	va_list ap;
580 
581 	(void)fflush(stdout);
582 	va_start(ap, fmt);
583 	ParseVErrorInternal(stderr, true, NULL, level, fmt, ap);
584 	va_end(ap);
585 
586 	if (opts.debug_file != stdout && opts.debug_file != stderr) {
587 		va_start(ap, fmt);
588 		ParseVErrorInternal(opts.debug_file, true, NULL,
589 		    level, fmt, ap);
590 		va_end(ap);
591 	}
592 }
593 
594 
595 /*
596  * Handle an .info, .warning or .error directive.  For an .error directive,
597  * exit immediately.
598  */
599 static void
600 HandleMessage(ParseErrorLevel level, const char *levelName, const char *umsg)
601 {
602 	char *xmsg;
603 
604 	if (umsg[0] == '\0') {
605 		Parse_Error(PARSE_FATAL, "Missing argument for \".%s\"",
606 		    levelName);
607 		return;
608 	}
609 
610 	xmsg = Var_Subst(umsg, SCOPE_CMDLINE, VARE_WANTRES);
611 	/* TODO: handle errors */
612 
613 	Parse_Error(level, "%s", xmsg);
614 	free(xmsg);
615 
616 	if (level == PARSE_FATAL) {
617 		PrintOnError(NULL, "\n");
618 		exit(1);
619 	}
620 }
621 
622 /*
623  * Add the child to the parent's children, and for non-special targets, vice
624  * versa.  Special targets such as .END do not need to be informed once the
625  * child target has been made.
626  */
627 static void
628 LinkSource(GNode *pgn, GNode *cgn, bool isSpecial)
629 {
630 	if ((pgn->type & OP_DOUBLEDEP) && !Lst_IsEmpty(&pgn->cohorts))
631 		pgn = pgn->cohorts.last->datum;
632 
633 	Lst_Append(&pgn->children, cgn);
634 	pgn->unmade++;
635 
636 	/* Special targets like .END don't need any children. */
637 	if (!isSpecial)
638 		Lst_Append(&cgn->parents, pgn);
639 
640 	if (DEBUG(PARSE)) {
641 		debug_printf("# LinkSource: added child %s - %s\n",
642 		    pgn->name, cgn->name);
643 		Targ_PrintNode(pgn, 0);
644 		Targ_PrintNode(cgn, 0);
645 	}
646 }
647 
648 /* Add the node to each target from the current dependency group. */
649 static void
650 LinkToTargets(GNode *gn, bool isSpecial)
651 {
652 	GNodeListNode *ln;
653 
654 	for (ln = targets->first; ln != NULL; ln = ln->next)
655 		LinkSource(ln->datum, gn, isSpecial);
656 }
657 
658 static bool
659 TryApplyDependencyOperator(GNode *gn, GNodeType op)
660 {
661 	/*
662 	 * If the node occurred on the left-hand side of a dependency and the
663 	 * operator also defines a dependency, they must match.
664 	 */
665 	if ((op & OP_OPMASK) && (gn->type & OP_OPMASK) &&
666 	    ((op & OP_OPMASK) != (gn->type & OP_OPMASK))) {
667 		Parse_Error(PARSE_FATAL, "Inconsistent operator for %s",
668 		    gn->name);
669 		return false;
670 	}
671 
672 	if (op == OP_DOUBLEDEP && (gn->type & OP_OPMASK) == OP_DOUBLEDEP) {
673 		/*
674 		 * If the node was on the left-hand side of a '::' operator,
675 		 * we need to create a new instance of it for the children
676 		 * and commands on this dependency line since each of these
677 		 * dependency groups has its own attributes and commands,
678 		 * separate from the others.
679 		 *
680 		 * The new instance is placed on the 'cohorts' list of the
681 		 * initial one (note the initial one is not on its own
682 		 * cohorts list) and the new instance is linked to all
683 		 * parents of the initial instance.
684 		 */
685 		GNode *cohort;
686 
687 		/*
688 		 * Propagate copied bits to the initial node.  They'll be
689 		 * propagated back to the rest of the cohorts later.
690 		 */
691 		gn->type |= op & (unsigned)~OP_OPMASK;
692 
693 		cohort = Targ_NewInternalNode(gn->name);
694 		if (doing_depend)
695 			RememberLocation(cohort);
696 		/*
697 		 * Make the cohort invisible as well to avoid duplicating it
698 		 * into other variables. True, parents of this target won't
699 		 * tend to do anything with their local variables, but better
700 		 * safe than sorry.
701 		 *
702 		 * (I think this is pointless now, since the relevant list
703 		 * traversals will no longer see this node anyway. -mycroft)
704 		 */
705 		cohort->type = op | OP_INVISIBLE;
706 		Lst_Append(&gn->cohorts, cohort);
707 		cohort->centurion = gn;
708 		gn->unmade_cohorts++;
709 		snprintf(cohort->cohort_num, sizeof cohort->cohort_num, "#%d",
710 		    (unsigned int)gn->unmade_cohorts % 1000000);
711 	} else {
712 		/*
713 		 * We don't want to nuke any previous flags (whatever they
714 		 * were) so we just OR the new operator into the old.
715 		 */
716 		gn->type |= op;
717 	}
718 
719 	return true;
720 }
721 
722 static void
723 ApplyDependencyOperator(GNodeType op)
724 {
725 	GNodeListNode *ln;
726 
727 	for (ln = targets->first; ln != NULL; ln = ln->next)
728 		if (!TryApplyDependencyOperator(ln->datum, op))
729 			break;
730 }
731 
732 /*
733  * We add a .WAIT node in the dependency list. After any dynamic dependencies
734  * (and filename globbing) have happened, it is given a dependency on each
735  * previous child, back until the previous .WAIT node. The next child won't
736  * be scheduled until the .WAIT node is built.
737  *
738  * We give each .WAIT node a unique name (mainly for diagnostics).
739  */
740 static void
741 ApplyDependencySourceWait(bool isSpecial)
742 {
743 	static unsigned wait_number = 0;
744 	char name[6 + 10 + 1];
745 	GNode *gn;
746 
747 	snprintf(name, sizeof name, ".WAIT_%u", ++wait_number);
748 	gn = Targ_NewInternalNode(name);
749 	if (doing_depend)
750 		RememberLocation(gn);
751 	gn->type = OP_WAIT | OP_PHONY | OP_DEPENDS | OP_NOTMAIN;
752 	LinkToTargets(gn, isSpecial);
753 }
754 
755 static bool
756 ApplyDependencySourceKeyword(const char *src, ParseSpecial special)
757 {
758 	int keywd;
759 	GNodeType targetAttr;
760 
761 	if (*src != '.' || !ch_isupper(src[1]))
762 		return false;
763 
764 	keywd = FindKeyword(src);
765 	if (keywd == -1)
766 		return false;
767 
768 	targetAttr = parseKeywords[keywd].targetAttr;
769 	if (targetAttr != OP_NONE) {
770 		ApplyDependencyOperator(targetAttr);
771 		return true;
772 	}
773 	if (parseKeywords[keywd].special == SP_WAIT) {
774 		ApplyDependencySourceWait(special != SP_NOT);
775 		return true;
776 	}
777 	return false;
778 }
779 
780 /*
781  * In a line like ".MAIN: source1 source2", add all sources to the list of
782  * things to create, but only if the user didn't specify a target on the
783  * command line and .MAIN occurs for the first time.
784  *
785  * See HandleDependencyTargetSpecial, branch SP_MAIN.
786  * See unit-tests/cond-func-make-main.mk.
787  */
788 static void
789 ApplyDependencySourceMain(const char *src)
790 {
791 	Lst_Append(&opts.create, bmake_strdup(src));
792 	/*
793 	 * Add the name to the .TARGETS variable as well, so the user can
794 	 * employ that, if desired.
795 	 */
796 	Global_Append(".TARGETS", src);
797 }
798 
799 /*
800  * For the sources of a .ORDER target, create predecessor/successor links
801  * between the previous source and the current one.
802  */
803 static void
804 ApplyDependencySourceOrder(const char *src)
805 {
806 	GNode *gn;
807 
808 	gn = Targ_GetNode(src);
809 	if (doing_depend)
810 		RememberLocation(gn);
811 	if (order_pred != NULL) {
812 		Lst_Append(&order_pred->order_succ, gn);
813 		Lst_Append(&gn->order_pred, order_pred);
814 		if (DEBUG(PARSE)) {
815 			debug_printf(
816 			    "# .ORDER forces '%s' to be made before '%s'\n",
817 			    order_pred->name, gn->name);
818 			Targ_PrintNode(order_pred, 0);
819 			Targ_PrintNode(gn, 0);
820 		}
821 	}
822 	/*
823 	 * The current source now becomes the predecessor for the next one.
824 	 */
825 	order_pred = gn;
826 }
827 
828 /* The source is not an attribute, so find/create a node for it. */
829 static void
830 ApplyDependencySourceOther(const char *src, GNodeType targetAttr,
831 			   ParseSpecial special)
832 {
833 	GNode *gn;
834 
835 	gn = Targ_GetNode(src);
836 	if (doing_depend)
837 		RememberLocation(gn);
838 	if (targetAttr != OP_NONE)
839 		gn->type |= targetAttr;
840 	else
841 		LinkToTargets(gn, special != SP_NOT);
842 }
843 
844 /*
845  * Given the name of a source in a dependency line, figure out if it is an
846  * attribute (such as .SILENT) and if so, apply it to all targets. Otherwise
847  * decide if there is some attribute which should be applied *to* the source
848  * because of some special target (such as .PHONY) and apply it if so.
849  * Otherwise, make the source a child of the targets.
850  */
851 static void
852 ApplyDependencySource(GNodeType targetAttr, const char *src,
853 		      ParseSpecial special)
854 {
855 	if (ApplyDependencySourceKeyword(src, special))
856 		return;
857 
858 	if (special == SP_MAIN)
859 		ApplyDependencySourceMain(src);
860 	else if (special == SP_ORDER)
861 		ApplyDependencySourceOrder(src);
862 	else
863 		ApplyDependencySourceOther(src, targetAttr, special);
864 }
865 
866 /*
867  * If we have yet to decide on a main target to make, in the absence of any
868  * user input, we want the first target on the first dependency line that is
869  * actually a real target (i.e. isn't a .USE or .EXEC rule) to be made.
870  */
871 static void
872 MaybeUpdateMainTarget(void)
873 {
874 	GNodeListNode *ln;
875 
876 	if (mainNode != NULL)
877 		return;
878 
879 	for (ln = targets->first; ln != NULL; ln = ln->next) {
880 		GNode *gn = ln->datum;
881 		if (GNode_IsMainCandidate(gn)) {
882 			DEBUG1(MAKE, "Setting main node to \"%s\"\n", gn->name);
883 			mainNode = gn;
884 			return;
885 		}
886 	}
887 }
888 
889 static void
890 InvalidLineType(const char *line)
891 {
892 	if (strncmp(line, "<<<<<<", 6) == 0 ||
893 	    strncmp(line, ">>>>>>", 6) == 0)
894 		Parse_Error(PARSE_FATAL,
895 		    "Makefile appears to contain unresolved CVS/RCS/??? merge conflicts");
896 	else if (line[0] == '.') {
897 		const char *dirstart = line + 1;
898 		const char *dirend;
899 		cpp_skip_whitespace(&dirstart);
900 		dirend = dirstart;
901 		while (ch_isalnum(*dirend) || *dirend == '-')
902 			dirend++;
903 		Parse_Error(PARSE_FATAL, "Unknown directive \"%.*s\"",
904 		    (int)(dirend - dirstart), dirstart);
905 	} else
906 		Parse_Error(PARSE_FATAL, "Invalid line type");
907 }
908 
909 static void
910 ParseDependencyTargetWord(char **pp, const char *lstart)
911 {
912 	const char *cp = *pp;
913 
914 	while (*cp != '\0') {
915 		if ((ch_isspace(*cp) || *cp == '!' || *cp == ':' ||
916 		     *cp == '(') &&
917 		    !IsEscaped(lstart, cp))
918 			break;
919 
920 		if (*cp == '$') {
921 			/*
922 			 * Must be a dynamic source (would have been expanded
923 			 * otherwise).
924 			 *
925 			 * There should be no errors in this, as they would
926 			 * have been discovered in the initial Var_Subst and
927 			 * we wouldn't be here.
928 			 */
929 			FStr val = Var_Parse(&cp, SCOPE_CMDLINE,
930 			    VARE_PARSE_ONLY);
931 			FStr_Done(&val);
932 		} else
933 			cp++;
934 	}
935 
936 	*pp += cp - *pp;
937 }
938 
939 /*
940  * Handle special targets like .PATH, .DEFAULT, .BEGIN, .ORDER.
941  *
942  * See the tests deptgt-*.mk.
943  */
944 static void
945 HandleDependencyTargetSpecial(const char *targetName,
946 			      ParseSpecial *inout_special,
947 			      SearchPathList **inout_paths)
948 {
949 	switch (*inout_special) {
950 	case SP_PATH:
951 		if (*inout_paths == NULL)
952 			*inout_paths = Lst_New();
953 		Lst_Append(*inout_paths, &dirSearchPath);
954 		break;
955 	case SP_SYSPATH:
956 		if (*inout_paths == NULL)
957 			*inout_paths = Lst_New();
958 		Lst_Append(*inout_paths, sysIncPath);
959 		break;
960 	case SP_MAIN:
961 		/*
962 		 * Allow targets from the command line to override the
963 		 * .MAIN node.
964 		 */
965 		if (!Lst_IsEmpty(&opts.create))
966 			*inout_special = SP_NOT;
967 		break;
968 	case SP_BEGIN:
969 	case SP_END:
970 	case SP_STALE:
971 	case SP_ERROR:
972 	case SP_INTERRUPT: {
973 		GNode *gn = Targ_GetNode(targetName);
974 		if (doing_depend)
975 			RememberLocation(gn);
976 		gn->type |= OP_NOTMAIN | OP_SPECIAL;
977 		Lst_Append(targets, gn);
978 		break;
979 	}
980 	case SP_DEFAULT: {
981 		/*
982 		 * Need to create a node to hang commands on, but we don't
983 		 * want it in the graph, nor do we want it to be the Main
984 		 * Target. We claim the node is a transformation rule to make
985 		 * life easier later, when we'll use Make_HandleUse to
986 		 * actually apply the .DEFAULT commands.
987 		 */
988 		GNode *gn = GNode_New(".DEFAULT");
989 		gn->type |= OP_NOTMAIN | OP_TRANSFORM;
990 		Lst_Append(targets, gn);
991 		defaultNode = gn;
992 		break;
993 	}
994 	case SP_DELETE_ON_ERROR:
995 		deleteOnError = true;
996 		break;
997 	case SP_NOTPARALLEL:
998 		opts.maxJobs = 1;
999 		break;
1000 	case SP_SINGLESHELL:
1001 		opts.compatMake = true;
1002 		break;
1003 	case SP_ORDER:
1004 		order_pred = NULL;
1005 		break;
1006 	default:
1007 		break;
1008 	}
1009 }
1010 
1011 static bool
1012 HandleDependencyTargetPath(const char *suffixName,
1013 			   SearchPathList **inout_paths)
1014 {
1015 	SearchPath *path;
1016 
1017 	path = Suff_GetPath(suffixName);
1018 	if (path == NULL) {
1019 		Parse_Error(PARSE_FATAL,
1020 		    "Suffix '%s' not defined (yet)", suffixName);
1021 		return false;
1022 	}
1023 
1024 	if (*inout_paths == NULL)
1025 		*inout_paths = Lst_New();
1026 	Lst_Append(*inout_paths, path);
1027 
1028 	return true;
1029 }
1030 
1031 /* See if it's a special target and if so set inout_special to match it. */
1032 static bool
1033 HandleDependencyTarget(const char *targetName,
1034 		       ParseSpecial *inout_special,
1035 		       GNodeType *inout_targetAttr,
1036 		       SearchPathList **inout_paths)
1037 {
1038 	int keywd;
1039 
1040 	if (!(targetName[0] == '.' && ch_isupper(targetName[1])))
1041 		return true;
1042 
1043 	/*
1044 	 * See if the target is a special target that must have it
1045 	 * or its sources handled specially.
1046 	 */
1047 	keywd = FindKeyword(targetName);
1048 	if (keywd != -1) {
1049 		if (*inout_special == SP_PATH &&
1050 		    parseKeywords[keywd].special != SP_PATH) {
1051 			Parse_Error(PARSE_FATAL, "Mismatched special targets");
1052 			return false;
1053 		}
1054 
1055 		*inout_special = parseKeywords[keywd].special;
1056 		*inout_targetAttr = parseKeywords[keywd].targetAttr;
1057 
1058 		HandleDependencyTargetSpecial(targetName, inout_special,
1059 		    inout_paths);
1060 
1061 	} else if (strncmp(targetName, ".PATH", 5) == 0) {
1062 		*inout_special = SP_PATH;
1063 		if (!HandleDependencyTargetPath(targetName + 5, inout_paths))
1064 			return false;
1065 	}
1066 	return true;
1067 }
1068 
1069 static void
1070 HandleSingleDependencyTargetMundane(const char *name)
1071 {
1072 	GNode *gn = Suff_IsTransform(name)
1073 	    ? Suff_AddTransform(name)
1074 	    : Targ_GetNode(name);
1075 	if (doing_depend)
1076 		RememberLocation(gn);
1077 
1078 	Lst_Append(targets, gn);
1079 }
1080 
1081 static void
1082 HandleDependencyTargetMundane(const char *targetName)
1083 {
1084 	if (Dir_HasWildcards(targetName)) {
1085 		StringList targetNames = LST_INIT;
1086 
1087 		SearchPath *emptyPath = SearchPath_New();
1088 		SearchPath_Expand(emptyPath, targetName, &targetNames);
1089 		SearchPath_Free(emptyPath);
1090 
1091 		while (!Lst_IsEmpty(&targetNames)) {
1092 			char *targName = Lst_Dequeue(&targetNames);
1093 			HandleSingleDependencyTargetMundane(targName);
1094 			free(targName);
1095 		}
1096 	} else
1097 		HandleSingleDependencyTargetMundane(targetName);
1098 }
1099 
1100 static void
1101 SkipExtraTargets(char **pp, const char *lstart)
1102 {
1103 	bool warning = false;
1104 	const char *p = *pp;
1105 
1106 	while (*p != '\0') {
1107 		if (!IsEscaped(lstart, p) && (*p == '!' || *p == ':'))
1108 			break;
1109 		if (IsEscaped(lstart, p) || (*p != ' ' && *p != '\t'))
1110 			warning = true;
1111 		p++;
1112 	}
1113 	if (warning) {
1114 		const char *start = *pp;
1115 		cpp_skip_whitespace(&start);
1116 		Parse_Error(PARSE_WARNING, "Extra target '%.*s' ignored",
1117 		    (int)(p - start), start);
1118 	}
1119 
1120 	*pp += p - *pp;
1121 }
1122 
1123 static void
1124 CheckSpecialMundaneMixture(ParseSpecial special)
1125 {
1126 	switch (special) {
1127 	case SP_DEFAULT:
1128 	case SP_STALE:
1129 	case SP_BEGIN:
1130 	case SP_END:
1131 	case SP_ERROR:
1132 	case SP_INTERRUPT:
1133 		/*
1134 		 * These create nodes on which to hang commands, so targets
1135 		 * shouldn't be empty.
1136 		 */
1137 	case SP_NOT:
1138 		/* Nothing special here -- targets may be empty. */
1139 		break;
1140 	default:
1141 		Parse_Error(PARSE_WARNING,
1142 		    "Special and mundane targets don't mix. "
1143 		    "Mundane ones ignored");
1144 		break;
1145 	}
1146 }
1147 
1148 /*
1149  * In a dependency line like 'targets: sources' or 'targets! sources', parse
1150  * the operator ':', '::' or '!' from between the targets and the sources.
1151  */
1152 static GNodeType
1153 ParseDependencyOp(char **pp)
1154 {
1155 	if (**pp == '!')
1156 		return (*pp)++, OP_FORCE;
1157 	if (**pp == ':' && (*pp)[1] == ':')
1158 		return *pp += 2, OP_DOUBLEDEP;
1159 	else if (**pp == ':')
1160 		return (*pp)++, OP_DEPENDS;
1161 	else
1162 		return OP_NONE;
1163 }
1164 
1165 static void
1166 ClearPaths(ParseSpecial special, SearchPathList *paths)
1167 {
1168 	if (paths != NULL) {
1169 		SearchPathListNode *ln;
1170 		for (ln = paths->first; ln != NULL; ln = ln->next)
1171 			SearchPath_Clear(ln->datum);
1172 	}
1173 	if (special == SP_SYSPATH)
1174 		Dir_SetSYSPATH();
1175 	else
1176 		Dir_SetPATH();
1177 }
1178 
1179 static char *
1180 FindInDirOfIncludingFile(const char *file)
1181 {
1182 	char *fullname, *incdir, *slash, *newName;
1183 	int i;
1184 
1185 	fullname = NULL;
1186 	incdir = bmake_strdup(CurFile()->name.str);
1187 	slash = strrchr(incdir, '/');
1188 	if (slash != NULL) {
1189 		*slash = '\0';
1190 		/*
1191 		 * Now do lexical processing of leading "../" on the
1192 		 * filename.
1193 		 */
1194 		for (i = 0; strncmp(file + i, "../", 3) == 0; i += 3) {
1195 			slash = strrchr(incdir + 1, '/');
1196 			if (slash == NULL || strcmp(slash, "/..") == 0)
1197 				break;
1198 			*slash = '\0';
1199 		}
1200 		newName = str_concat3(incdir, "/", file + i);
1201 		fullname = Dir_FindFile(newName, parseIncPath);
1202 		if (fullname == NULL)
1203 			fullname = Dir_FindFile(newName, &dirSearchPath);
1204 		free(newName);
1205 	}
1206 	free(incdir);
1207 	return fullname;
1208 }
1209 
1210 static char *
1211 FindInQuotPath(const char *file)
1212 {
1213 	const char *suff;
1214 	SearchPath *suffPath;
1215 	char *fullname;
1216 
1217 	fullname = FindInDirOfIncludingFile(file);
1218 	if (fullname == NULL &&
1219 	    (suff = strrchr(file, '.')) != NULL &&
1220 	    (suffPath = Suff_GetPath(suff)) != NULL)
1221 		fullname = Dir_FindFile(file, suffPath);
1222 	if (fullname == NULL)
1223 		fullname = Dir_FindFile(file, parseIncPath);
1224 	if (fullname == NULL)
1225 		fullname = Dir_FindFile(file, &dirSearchPath);
1226 	return fullname;
1227 }
1228 
1229 static bool
1230 SkipGuarded(const char *fullname)
1231 {
1232 	Guard *guard = HashTable_FindValue(&guards, fullname);
1233 	if (guard != NULL && guard->kind == GK_VARIABLE
1234 	    && GNode_ValueDirect(SCOPE_GLOBAL, guard->name) != NULL)
1235 		goto skip;
1236 	if (guard != NULL && guard->kind == GK_TARGET
1237 	    && Targ_FindNode(guard->name) != NULL)
1238 		goto skip;
1239 	return false;
1240 
1241 skip:
1242 	DEBUG2(PARSE, "Skipping '%s' because '%s' is defined\n",
1243 	    fullname, guard->name);
1244 	return true;
1245 }
1246 
1247 /*
1248  * Handle one of the .[-ds]include directives by remembering the current file
1249  * and pushing the included file on the stack.  After the included file has
1250  * finished, parsing continues with the including file; see Parse_PushInput
1251  * and ParseEOF.
1252  *
1253  * System includes are looked up in sysIncPath, any other includes are looked
1254  * up in the parsedir and then in the directories specified by the -I command
1255  * line options.
1256  */
1257 static void
1258 IncludeFile(const char *file, bool isSystem, bool depinc, bool silent)
1259 {
1260 	Buffer buf;
1261 	char *fullname;		/* full pathname of file */
1262 	int fd;
1263 
1264 	fullname = file[0] == '/' ? bmake_strdup(file) : NULL;
1265 
1266 	if (fullname == NULL && !isSystem)
1267 		fullname = FindInQuotPath(file);
1268 
1269 	if (fullname == NULL) {
1270 		SearchPath *path = Lst_IsEmpty(&sysIncPath->dirs)
1271 		    ? defSysIncPath : sysIncPath;
1272 		fullname = Dir_FindFile(file, path);
1273 	}
1274 
1275 	if (fullname == NULL) {
1276 		if (!silent)
1277 			Parse_Error(PARSE_FATAL, "Could not find %s", file);
1278 		return;
1279 	}
1280 
1281 	if (SkipGuarded(fullname))
1282 		return;
1283 
1284 	if ((fd = open(fullname, O_RDONLY)) == -1) {
1285 		if (!silent)
1286 			Parse_Error(PARSE_FATAL, "Cannot open %s", fullname);
1287 		free(fullname);
1288 		return;
1289 	}
1290 
1291 	buf = LoadFile(fullname, fd);
1292 	(void)close(fd);
1293 
1294 	Parse_PushInput(fullname, 1, 0, buf, NULL);
1295 	if (depinc)
1296 		doing_depend = depinc;	/* only turn it on */
1297 	free(fullname);
1298 }
1299 
1300 /* Handle a "dependency" line like '.SPECIAL:' without any sources. */
1301 static void
1302 HandleDependencySourcesEmpty(ParseSpecial special, SearchPathList *paths)
1303 {
1304 	switch (special) {
1305 	case SP_SUFFIXES:
1306 		Suff_ClearSuffixes();
1307 		break;
1308 	case SP_PRECIOUS:
1309 		allPrecious = true;
1310 		break;
1311 	case SP_IGNORE:
1312 		opts.ignoreErrors = true;
1313 		break;
1314 	case SP_SILENT:
1315 		opts.silent = true;
1316 		break;
1317 	case SP_PATH:
1318 	case SP_SYSPATH:
1319 		ClearPaths(special, paths);
1320 		break;
1321 #ifdef POSIX
1322 	case SP_POSIX:
1323 		if (posix_state == PS_NOW_OR_NEVER) {
1324 			/*
1325 			 * With '-r', 'posix.mk' (if it exists)
1326 			 * can effectively substitute for 'sys.mk',
1327 			 * otherwise it is an extension.
1328 			 */
1329 			Global_Set("%POSIX", "1003.2");
1330 			IncludeFile("posix.mk", true, false, true);
1331 		}
1332 		break;
1333 #endif
1334 	default:
1335 		break;
1336 	}
1337 }
1338 
1339 static void
1340 AddToPaths(const char *dir, SearchPathList *paths)
1341 {
1342 	if (paths != NULL) {
1343 		SearchPathListNode *ln;
1344 		for (ln = paths->first; ln != NULL; ln = ln->next)
1345 			(void)SearchPath_Add(ln->datum, dir);
1346 	}
1347 }
1348 
1349 /*
1350  * If the target was one that doesn't take files as its sources but takes
1351  * something like suffixes, we take each space-separated word on the line as
1352  * a something and deal with it accordingly.
1353  */
1354 static void
1355 ParseDependencySourceSpecial(ParseSpecial special, const char *word,
1356 			     SearchPathList *paths)
1357 {
1358 	switch (special) {
1359 	case SP_SUFFIXES:
1360 		Suff_AddSuffix(word);
1361 		break;
1362 	case SP_PATH:
1363 		AddToPaths(word, paths);
1364 		break;
1365 	case SP_INCLUDES:
1366 		Suff_AddInclude(word);
1367 		break;
1368 	case SP_LIBS:
1369 		Suff_AddLib(word);
1370 		break;
1371 	case SP_NOREADONLY:
1372 		Var_ReadOnly(word, false);
1373 		break;
1374 	case SP_NULL:
1375 		Suff_SetNull(word);
1376 		break;
1377 	case SP_OBJDIR:
1378 		Main_SetObjdir(false, "%s", word);
1379 		break;
1380 	case SP_READONLY:
1381 		Var_ReadOnly(word, true);
1382 		break;
1383 	case SP_SYSPATH:
1384 		AddToPaths(word, paths);
1385 		break;
1386 	default:
1387 		break;
1388 	}
1389 }
1390 
1391 static bool
1392 ApplyDependencyTarget(char *name, char *nameEnd, ParseSpecial *inout_special,
1393 		      GNodeType *inout_targetAttr,
1394 		      SearchPathList **inout_paths)
1395 {
1396 	char savec = *nameEnd;
1397 	*nameEnd = '\0';
1398 
1399 	if (!HandleDependencyTarget(name, inout_special,
1400 	    inout_targetAttr, inout_paths))
1401 		return false;
1402 
1403 	if (*inout_special == SP_NOT && *name != '\0')
1404 		HandleDependencyTargetMundane(name);
1405 	else if (*inout_special == SP_PATH && *name != '.' && *name != '\0')
1406 		Parse_Error(PARSE_WARNING, "Extra target (%s) ignored", name);
1407 
1408 	*nameEnd = savec;
1409 	return true;
1410 }
1411 
1412 static bool
1413 ParseDependencyTargets(char **pp,
1414 		       const char *lstart,
1415 		       ParseSpecial *inout_special,
1416 		       GNodeType *inout_targetAttr,
1417 		       SearchPathList **inout_paths)
1418 {
1419 	char *p = *pp;
1420 
1421 	for (;;) {
1422 		char *tgt = p;
1423 
1424 		ParseDependencyTargetWord(&p, lstart);
1425 
1426 		/*
1427 		 * If the word is followed by a left parenthesis, it's the
1428 		 * name of one or more files inside an archive.
1429 		 */
1430 		if (!IsEscaped(lstart, p) && *p == '(') {
1431 			p = tgt;
1432 			if (!Arch_ParseArchive(&p, targets, SCOPE_CMDLINE)) {
1433 				Parse_Error(PARSE_FATAL,
1434 				    "Error in archive specification: \"%s\"",
1435 				    tgt);
1436 				return false;
1437 			}
1438 			continue;
1439 		}
1440 
1441 		if (*p == '\0') {
1442 			InvalidLineType(lstart);
1443 			return false;
1444 		}
1445 
1446 		if (!ApplyDependencyTarget(tgt, p, inout_special,
1447 		    inout_targetAttr, inout_paths))
1448 			return false;
1449 
1450 		if (*inout_special != SP_NOT && *inout_special != SP_PATH)
1451 			SkipExtraTargets(&p, lstart);
1452 		else
1453 			pp_skip_whitespace(&p);
1454 
1455 		if (*p == '\0')
1456 			break;
1457 		if ((*p == '!' || *p == ':') && !IsEscaped(lstart, p))
1458 			break;
1459 	}
1460 
1461 	*pp = p;
1462 	return true;
1463 }
1464 
1465 static void
1466 ParseDependencySourcesSpecial(char *start,
1467 			      ParseSpecial special, SearchPathList *paths)
1468 {
1469 	char savec;
1470 
1471 	while (*start != '\0') {
1472 		char *end = start;
1473 		while (*end != '\0' && !ch_isspace(*end))
1474 			end++;
1475 		savec = *end;
1476 		*end = '\0';
1477 		ParseDependencySourceSpecial(special, start, paths);
1478 		*end = savec;
1479 		if (savec != '\0')
1480 			end++;
1481 		pp_skip_whitespace(&end);
1482 		start = end;
1483 	}
1484 }
1485 
1486 static void
1487 LinkVarToTargets(VarAssign *var)
1488 {
1489 	GNodeListNode *ln;
1490 
1491 	for (ln = targets->first; ln != NULL; ln = ln->next)
1492 		Parse_Var(var, ln->datum);
1493 }
1494 
1495 static bool
1496 ParseDependencySourcesMundane(char *start,
1497 			      ParseSpecial special, GNodeType targetAttr)
1498 {
1499 	while (*start != '\0') {
1500 		char *end = start;
1501 		VarAssign var;
1502 
1503 		/*
1504 		 * Check for local variable assignment,
1505 		 * rest of the line is the value.
1506 		 */
1507 		if (Parse_IsVar(start, &var)) {
1508 			/*
1509 			 * Check if this makefile has disabled
1510 			 * setting local variables.
1511 			 */
1512 			bool target_vars = GetBooleanExpr(
1513 			    "${.MAKE.TARGET_LOCAL_VARIABLES}", true);
1514 
1515 			if (target_vars)
1516 				LinkVarToTargets(&var);
1517 			free(var.varname);
1518 			if (target_vars)
1519 				return true;
1520 		}
1521 
1522 		/*
1523 		 * The targets take real sources, so we must beware of archive
1524 		 * specifications (i.e. things with left parentheses in them)
1525 		 * and handle them accordingly.
1526 		 */
1527 		for (; *end != '\0' && !ch_isspace(*end); end++) {
1528 			if (*end == '(' && end > start && end[-1] != '$') {
1529 				/*
1530 				 * Only stop for a left parenthesis if it
1531 				 * isn't at the start of a word (that'll be
1532 				 * for variable changes later) and isn't
1533 				 * preceded by a dollar sign (a dynamic
1534 				 * source).
1535 				 */
1536 				break;
1537 			}
1538 		}
1539 
1540 		if (*end == '(') {
1541 			GNodeList sources = LST_INIT;
1542 			if (!Arch_ParseArchive(&start, &sources,
1543 			    SCOPE_CMDLINE)) {
1544 				Parse_Error(PARSE_FATAL,
1545 				    "Error in source archive spec \"%s\"",
1546 				    start);
1547 				return false;
1548 			}
1549 
1550 			while (!Lst_IsEmpty(&sources)) {
1551 				GNode *gn = Lst_Dequeue(&sources);
1552 				ApplyDependencySource(targetAttr, gn->name,
1553 				    special);
1554 			}
1555 			Lst_Done(&sources);
1556 			end = start;
1557 		} else {
1558 			if (*end != '\0') {
1559 				*end = '\0';
1560 				end++;
1561 			}
1562 
1563 			ApplyDependencySource(targetAttr, start, special);
1564 		}
1565 		pp_skip_whitespace(&end);
1566 		start = end;
1567 	}
1568 	return true;
1569 }
1570 
1571 /*
1572  * From a dependency line like 'targets: sources', parse the sources.
1573  *
1574  * See the tests depsrc-*.mk.
1575  */
1576 static void
1577 ParseDependencySources(char *p, GNodeType targetAttr,
1578 		       ParseSpecial special, SearchPathList **inout_paths)
1579 {
1580 	if (*p == '\0') {
1581 		HandleDependencySourcesEmpty(special, *inout_paths);
1582 	} else if (special == SP_MFLAGS) {
1583 		Main_ParseArgLine(p);
1584 		return;
1585 	} else if (special == SP_SHELL) {
1586 		if (!Job_ParseShell(p)) {
1587 			Parse_Error(PARSE_FATAL,
1588 			    "improper shell specification");
1589 			return;
1590 		}
1591 		return;
1592 	} else if (special == SP_NOTPARALLEL || special == SP_SINGLESHELL ||
1593 		   special == SP_DELETE_ON_ERROR) {
1594 		return;
1595 	}
1596 
1597 	/* Now go for the sources. */
1598 	switch (special) {
1599 	case SP_INCLUDES:
1600 	case SP_LIBS:
1601 	case SP_NOREADONLY:
1602 	case SP_NULL:
1603 	case SP_OBJDIR:
1604 	case SP_PATH:
1605 	case SP_READONLY:
1606 	case SP_SUFFIXES:
1607 	case SP_SYSPATH:
1608 		ParseDependencySourcesSpecial(p, special, *inout_paths);
1609 		if (*inout_paths != NULL) {
1610 			Lst_Free(*inout_paths);
1611 			*inout_paths = NULL;
1612 		}
1613 		if (special == SP_PATH)
1614 			Dir_SetPATH();
1615 		if (special == SP_SYSPATH)
1616 			Dir_SetSYSPATH();
1617 		break;
1618 	default:
1619 		assert(*inout_paths == NULL);
1620 		if (!ParseDependencySourcesMundane(p, special, targetAttr))
1621 			return;
1622 		break;
1623 	}
1624 
1625 	MaybeUpdateMainTarget();
1626 }
1627 
1628 /*
1629  * Parse a dependency line consisting of targets, followed by a dependency
1630  * operator, optionally followed by sources.
1631  *
1632  * The nodes of the sources are linked as children to the nodes of the
1633  * targets. Nodes are created as necessary.
1634  *
1635  * The operator is applied to each node in the global 'targets' list,
1636  * which is where the nodes found for the targets are kept.
1637  *
1638  * The sources are parsed in much the same way as the targets, except
1639  * that they are expanded using the wildcarding scheme of the C-Shell,
1640  * and a target is created for each expanded word. Each of the resulting
1641  * nodes is then linked to each of the targets as one of its children.
1642  *
1643  * Certain targets and sources such as .PHONY or .PRECIOUS are handled
1644  * specially, see ParseSpecial.
1645  *
1646  * Transformation rules such as '.c.o' are also handled here, see
1647  * Suff_AddTransform.
1648  *
1649  * Upon return, the value of the line is unspecified.
1650  */
1651 static void
1652 ParseDependency(char *line)
1653 {
1654 	char *p;
1655 	SearchPathList *paths;	/* search paths to alter when parsing a list
1656 				 * of .PATH targets */
1657 	GNodeType targetAttr;	/* from special sources */
1658 	ParseSpecial special;	/* in special targets, the children are
1659 				 * linked as children of the parent but not
1660 				 * vice versa */
1661 	GNodeType op;
1662 
1663 	DEBUG1(PARSE, "ParseDependency(%s)\n", line);
1664 	p = line;
1665 	paths = NULL;
1666 	targetAttr = OP_NONE;
1667 	special = SP_NOT;
1668 
1669 	if (!ParseDependencyTargets(&p, line, &special, &targetAttr, &paths))
1670 		goto out;
1671 
1672 	if (!Lst_IsEmpty(targets))
1673 		CheckSpecialMundaneMixture(special);
1674 
1675 	op = ParseDependencyOp(&p);
1676 	if (op == OP_NONE) {
1677 		InvalidLineType(line);
1678 		goto out;
1679 	}
1680 	ApplyDependencyOperator(op);
1681 
1682 	pp_skip_whitespace(&p);
1683 
1684 	ParseDependencySources(p, targetAttr, special, &paths);
1685 
1686 out:
1687 	if (paths != NULL)
1688 		Lst_Free(paths);
1689 }
1690 
1691 /*
1692  * Determine the assignment operator and adjust the end of the variable
1693  * name accordingly.
1694  */
1695 static VarAssign
1696 AdjustVarassignOp(const char *name, const char *nameEnd, const char *op,
1697 		  const char *value)
1698 {
1699 	VarAssignOp type;
1700 	VarAssign va;
1701 
1702 	if (op > name && op[-1] == '+') {
1703 		op--;
1704 		type = VAR_APPEND;
1705 
1706 	} else if (op > name && op[-1] == '?') {
1707 		op--;
1708 		type = VAR_DEFAULT;
1709 
1710 	} else if (op > name && op[-1] == ':') {
1711 		op--;
1712 		type = VAR_SUBST;
1713 
1714 	} else if (op > name && op[-1] == '!') {
1715 		op--;
1716 		type = VAR_SHELL;
1717 
1718 	} else {
1719 		type = VAR_NORMAL;
1720 #ifdef SUNSHCMD
1721 		while (op > name && ch_isspace(op[-1]))
1722 			op--;
1723 
1724 		if (op - name >= 3 && memcmp(op - 3, ":sh", 3) == 0) {
1725 			op -= 3;
1726 			type = VAR_SHELL;
1727 		}
1728 #endif
1729 	}
1730 
1731 	va.varname = bmake_strsedup(name, nameEnd < op ? nameEnd : op);
1732 	va.op = type;
1733 	va.value = value;
1734 	return va;
1735 }
1736 
1737 /*
1738  * Parse a variable assignment, consisting of a single-word variable name,
1739  * optional whitespace, an assignment operator, optional whitespace and the
1740  * variable value.
1741  *
1742  * Note: There is a lexical ambiguity with assignment modifier characters
1743  * in variable names. This routine interprets the character before the =
1744  * as a modifier. Therefore, an assignment like
1745  *	C++=/usr/bin/CC
1746  * is interpreted as "C+ +=" instead of "C++ =".
1747  *
1748  * Used for both lines in a file and command line arguments.
1749  */
1750 static bool
1751 Parse_IsVar(const char *p, VarAssign *out_var)
1752 {
1753 	const char *nameStart, *nameEnd, *firstSpace, *eq;
1754 	int level = 0;
1755 
1756 	cpp_skip_hspace(&p);	/* Skip to variable name */
1757 
1758 	/*
1759 	 * During parsing, the '+' of the operator '+=' is initially parsed
1760 	 * as part of the variable name.  It is later corrected, as is the
1761 	 * ':sh' modifier. Of these two (nameEnd and eq), the earlier one
1762 	 * determines the actual end of the variable name.
1763 	 */
1764 
1765 	nameStart = p;
1766 	firstSpace = NULL;
1767 
1768 	/*
1769 	 * Scan for one of the assignment operators outside a variable
1770 	 * expansion.
1771 	 */
1772 	while (*p != '\0') {
1773 		char ch = *p++;
1774 		if (ch == '(' || ch == '{') {
1775 			level++;
1776 			continue;
1777 		}
1778 		if (ch == ')' || ch == '}') {
1779 			level--;
1780 			continue;
1781 		}
1782 
1783 		if (level != 0)
1784 			continue;
1785 
1786 		if ((ch == ' ' || ch == '\t') && firstSpace == NULL)
1787 			firstSpace = p - 1;
1788 		while (ch == ' ' || ch == '\t')
1789 			ch = *p++;
1790 
1791 		if (ch == '\0')
1792 			return false;
1793 #ifdef SUNSHCMD
1794 		if (ch == ':' && p[0] == 's' && p[1] == 'h') {
1795 			p += 2;
1796 			continue;
1797 		}
1798 #endif
1799 		if (ch == '=')
1800 			eq = p - 1;
1801 		else if (*p == '=' &&
1802 		    (ch == '+' || ch == ':' || ch == '?' || ch == '!'))
1803 			eq = p;
1804 		else if (firstSpace != NULL)
1805 			return false;
1806 		else
1807 			continue;
1808 
1809 		nameEnd = firstSpace != NULL ? firstSpace : eq;
1810 		p = eq + 1;
1811 		cpp_skip_whitespace(&p);
1812 		*out_var = AdjustVarassignOp(nameStart, nameEnd, eq, p);
1813 		return true;
1814 	}
1815 
1816 	return false;
1817 }
1818 
1819 /*
1820  * Check for syntax errors such as unclosed expressions or unknown modifiers.
1821  */
1822 static void
1823 VarCheckSyntax(VarAssignOp type, const char *uvalue, GNode *scope)
1824 {
1825 	if (opts.strict) {
1826 		if (type != VAR_SUBST && strchr(uvalue, '$') != NULL) {
1827 			char *expandedValue = Var_Subst(uvalue,
1828 			    scope, VARE_PARSE_ONLY);
1829 			/* TODO: handle errors */
1830 			free(expandedValue);
1831 		}
1832 	}
1833 }
1834 
1835 /* Perform a variable assignment that uses the operator ':='. */
1836 static void
1837 VarAssign_EvalSubst(GNode *scope, const char *name, const char *uvalue,
1838 		    FStr *out_avalue)
1839 {
1840 	char *evalue;
1841 
1842 	/*
1843 	 * make sure that we set the variable the first time to nothing
1844 	 * so that it gets substituted.
1845 	 *
1846 	 * TODO: Add a test that demonstrates why this code is needed,
1847 	 *  apart from making the debug log longer.
1848 	 *
1849 	 * XXX: The variable name is expanded up to 3 times.
1850 	 */
1851 	if (!Var_ExistsExpand(scope, name))
1852 		Var_SetExpand(scope, name, "");
1853 
1854 	evalue = Var_Subst(uvalue, scope, VARE_KEEP_DOLLAR_UNDEF);
1855 	/* TODO: handle errors */
1856 
1857 	Var_SetExpand(scope, name, evalue);
1858 
1859 	*out_avalue = FStr_InitOwn(evalue);
1860 }
1861 
1862 /* Perform a variable assignment that uses the operator '!='. */
1863 static void
1864 VarAssign_EvalShell(const char *name, const char *uvalue, GNode *scope,
1865 		    FStr *out_avalue)
1866 {
1867 	FStr cmd;
1868 	char *output, *error;
1869 
1870 	cmd = FStr_InitRefer(uvalue);
1871 	Var_Expand(&cmd, SCOPE_CMDLINE, VARE_UNDEFERR);
1872 
1873 	output = Cmd_Exec(cmd.str, &error);
1874 	Var_SetExpand(scope, name, output);
1875 	*out_avalue = FStr_InitOwn(output);
1876 	if (error != NULL) {
1877 		Parse_Error(PARSE_WARNING, "%s", error);
1878 		free(error);
1879 	}
1880 
1881 	FStr_Done(&cmd);
1882 }
1883 
1884 /*
1885  * Perform a variable assignment.
1886  *
1887  * The actual value of the variable is returned in *out_true_avalue.
1888  * Especially for VAR_SUBST and VAR_SHELL this can differ from the literal
1889  * value.
1890  *
1891  * Return whether the assignment was actually performed, which is usually
1892  * the case.  It is only skipped if the operator is '?=' and the variable
1893  * already exists.
1894  */
1895 static bool
1896 VarAssign_Eval(const char *name, VarAssignOp op, const char *uvalue,
1897 	       GNode *scope, FStr *out_true_avalue)
1898 {
1899 	FStr avalue = FStr_InitRefer(uvalue);
1900 
1901 	if (op == VAR_APPEND)
1902 		Var_AppendExpand(scope, name, uvalue);
1903 	else if (op == VAR_SUBST)
1904 		VarAssign_EvalSubst(scope, name, uvalue, &avalue);
1905 	else if (op == VAR_SHELL)
1906 		VarAssign_EvalShell(name, uvalue, scope, &avalue);
1907 	else {
1908 		/* XXX: The variable name is expanded up to 2 times. */
1909 		if (op == VAR_DEFAULT && Var_ExistsExpand(scope, name))
1910 			return false;
1911 
1912 		/* Normal assignment -- just do it. */
1913 		Var_SetExpand(scope, name, uvalue);
1914 	}
1915 
1916 	*out_true_avalue = avalue;
1917 	return true;
1918 }
1919 
1920 static void
1921 VarAssignSpecial(const char *name, const char *avalue)
1922 {
1923 	if (strcmp(name, ".MAKEOVERRIDES") == 0)
1924 		Main_ExportMAKEFLAGS(false);	/* re-export MAKEFLAGS */
1925 	else if (strcmp(name, ".CURDIR") == 0) {
1926 		/*
1927 		 * Someone is being (too?) clever...
1928 		 * Let's pretend they know what they are doing and
1929 		 * re-initialize the 'cur' CachedDir.
1930 		 */
1931 		Dir_InitCur(avalue);
1932 		Dir_SetPATH();
1933 	} else if (strcmp(name, ".MAKE.JOB.PREFIX") == 0)
1934 		Job_SetPrefix();
1935 	else if (strcmp(name, ".MAKE.EXPORTED") == 0)
1936 		Var_ExportVars(avalue);
1937 }
1938 
1939 /* Perform the variable assignment in the given scope. */
1940 static void
1941 Parse_Var(VarAssign *var, GNode *scope)
1942 {
1943 	FStr avalue;		/* actual value (maybe expanded) */
1944 
1945 	VarCheckSyntax(var->op, var->value, scope);
1946 	if (VarAssign_Eval(var->varname, var->op, var->value, scope, &avalue)) {
1947 		VarAssignSpecial(var->varname, avalue.str);
1948 		FStr_Done(&avalue);
1949 	}
1950 }
1951 
1952 
1953 /*
1954  * See if the command possibly calls a sub-make by using the variable
1955  * expressions ${.MAKE}, ${MAKE} or the plain word "make".
1956  */
1957 static bool
1958 MaybeSubMake(const char *cmd)
1959 {
1960 	const char *start;
1961 
1962 	for (start = cmd; *start != '\0'; start++) {
1963 		const char *p = start;
1964 		char endc;
1965 
1966 		/* XXX: What if progname != "make"? */
1967 		if (strncmp(p, "make", 4) == 0)
1968 			if (start == cmd || !ch_isalnum(p[-1]))
1969 				if (!ch_isalnum(p[4]))
1970 					return true;
1971 
1972 		if (*p != '$')
1973 			continue;
1974 		p++;
1975 
1976 		if (*p == '{')
1977 			endc = '}';
1978 		else if (*p == '(')
1979 			endc = ')';
1980 		else
1981 			continue;
1982 		p++;
1983 
1984 		if (*p == '.')	/* Accept either ${.MAKE} or ${MAKE}. */
1985 			p++;
1986 
1987 		if (strncmp(p, "MAKE", 4) == 0 && p[4] == endc)
1988 			return true;
1989 	}
1990 	return false;
1991 }
1992 
1993 /*
1994  * Append the command to the target node.
1995  *
1996  * The node may be marked as a submake node if the command is determined to
1997  * be that.
1998  */
1999 static void
2000 GNode_AddCommand(GNode *gn, char *cmd)
2001 {
2002 	/* Add to last (ie current) cohort for :: targets */
2003 	if ((gn->type & OP_DOUBLEDEP) && gn->cohorts.last != NULL)
2004 		gn = gn->cohorts.last->datum;
2005 
2006 	/* if target already supplied, ignore commands */
2007 	if (!(gn->type & OP_HAS_COMMANDS)) {
2008 		Lst_Append(&gn->commands, cmd);
2009 		if (MaybeSubMake(cmd))
2010 			gn->type |= OP_SUBMAKE;
2011 		RememberLocation(gn);
2012 	} else {
2013 #if 0
2014 		/* XXX: We cannot do this until we fix the tree */
2015 		Lst_Append(&gn->commands, cmd);
2016 		Parse_Error(PARSE_WARNING,
2017 		    "overriding commands for target \"%s\"; "
2018 		    "previous commands defined at %s: %u ignored",
2019 		    gn->name, gn->fname, gn->lineno);
2020 #else
2021 		Parse_Error(PARSE_WARNING,
2022 		    "duplicate script for target \"%s\" ignored",
2023 		    gn->name);
2024 		ParseErrorInternal(gn, PARSE_WARNING,
2025 		    "using previous script for \"%s\" defined here",
2026 		    gn->name);
2027 #endif
2028 	}
2029 }
2030 
2031 /*
2032  * Add a directory to the path searched for included makefiles bracketed
2033  * by double-quotes.
2034  */
2035 void
2036 Parse_AddIncludeDir(const char *dir)
2037 {
2038 	(void)SearchPath_Add(parseIncPath, dir);
2039 }
2040 
2041 
2042 /*
2043  * Parse a directive like '.include' or '.-include'.
2044  *
2045  * .include "user-makefile.mk"
2046  * .include <system-makefile.mk>
2047  */
2048 static void
2049 ParseInclude(char *directive)
2050 {
2051 	char endc;		/* '>' or '"' */
2052 	char *p;
2053 	bool silent = directive[0] != 'i';
2054 	FStr file;
2055 
2056 	p = directive + (silent ? 8 : 7);
2057 	pp_skip_hspace(&p);
2058 
2059 	if (*p != '"' && *p != '<') {
2060 		Parse_Error(PARSE_FATAL,
2061 		    ".include filename must be delimited by '\"' or '<'");
2062 		return;
2063 	}
2064 
2065 	if (*p++ == '<')
2066 		endc = '>';
2067 	else
2068 		endc = '"';
2069 	file = FStr_InitRefer(p);
2070 
2071 	/* Skip to matching delimiter */
2072 	while (*p != '\0' && *p != endc)
2073 		p++;
2074 
2075 	if (*p != endc) {
2076 		Parse_Error(PARSE_FATAL,
2077 		    "Unclosed .include filename. '%c' expected", endc);
2078 		return;
2079 	}
2080 
2081 	*p = '\0';
2082 
2083 	Var_Expand(&file, SCOPE_CMDLINE, VARE_WANTRES);
2084 	IncludeFile(file.str, endc == '>', directive[0] == 'd', silent);
2085 	FStr_Done(&file);
2086 }
2087 
2088 /*
2089  * Split filename into dirname + basename, then assign these to the
2090  * given variables.
2091  */
2092 static void
2093 SetFilenameVars(const char *filename, const char *dirvar, const char *filevar)
2094 {
2095 	const char *slash, *basename;
2096 	FStr dirname;
2097 
2098 	slash = strrchr(filename, '/');
2099 	if (slash == NULL) {
2100 		dirname = FStr_InitRefer(curdir);
2101 		basename = filename;
2102 	} else {
2103 		dirname = FStr_InitOwn(bmake_strsedup(filename, slash));
2104 		basename = slash + 1;
2105 	}
2106 
2107 	Global_Set(dirvar, dirname.str);
2108 	Global_Set(filevar, basename);
2109 
2110 	DEBUG4(PARSE, "SetFilenameVars: ${%s} = `%s' ${%s} = `%s'\n",
2111 	    dirvar, dirname.str, filevar, basename);
2112 	FStr_Done(&dirname);
2113 }
2114 
2115 /*
2116  * Return the immediately including file.
2117  *
2118  * This is made complicated since the .for loop is implemented as a special
2119  * kind of .include; see For_Run.
2120  */
2121 static const char *
2122 GetActuallyIncludingFile(void)
2123 {
2124 	size_t i;
2125 	const IncludedFile *incs = GetInclude(0);
2126 
2127 	for (i = includes.len; i >= 2; i--)
2128 		if (incs[i - 1].forLoop == NULL)
2129 			return incs[i - 2].name.str;
2130 	return NULL;
2131 }
2132 
2133 /* Set .PARSEDIR, .PARSEFILE, .INCLUDEDFROMDIR and .INCLUDEDFROMFILE. */
2134 static void
2135 SetParseFile(const char *filename)
2136 {
2137 	const char *including;
2138 
2139 	SetFilenameVars(filename, ".PARSEDIR", ".PARSEFILE");
2140 
2141 	including = GetActuallyIncludingFile();
2142 	if (including != NULL) {
2143 		SetFilenameVars(including,
2144 		    ".INCLUDEDFROMDIR", ".INCLUDEDFROMFILE");
2145 	} else {
2146 		Global_Delete(".INCLUDEDFROMDIR");
2147 		Global_Delete(".INCLUDEDFROMFILE");
2148 	}
2149 }
2150 
2151 static bool
2152 StrContainsWord(const char *str, const char *word)
2153 {
2154 	size_t strLen = strlen(str);
2155 	size_t wordLen = strlen(word);
2156 	const char *p;
2157 
2158 	if (strLen < wordLen)
2159 		return false;
2160 
2161 	for (p = str; p != NULL; p = strchr(p, ' ')) {
2162 		if (*p == ' ')
2163 			p++;
2164 		if (p > str + strLen - wordLen)
2165 			return false;
2166 
2167 		if (memcmp(p, word, wordLen) == 0 &&
2168 		    (p[wordLen] == '\0' || p[wordLen] == ' '))
2169 			return true;
2170 	}
2171 	return false;
2172 }
2173 
2174 /*
2175  * XXX: Searching through a set of words with this linear search is
2176  * inefficient for variables that contain thousands of words.
2177  *
2178  * XXX: The paths in this list don't seem to be normalized in any way.
2179  */
2180 static bool
2181 VarContainsWord(const char *varname, const char *word)
2182 {
2183 	FStr val = Var_Value(SCOPE_GLOBAL, varname);
2184 	bool found = val.str != NULL && StrContainsWord(val.str, word);
2185 	FStr_Done(&val);
2186 	return found;
2187 }
2188 
2189 /*
2190  * Track the makefiles we read - so makefiles can set dependencies on them.
2191  * Avoid adding anything more than once.
2192  *
2193  * Time complexity: O(n) per call, in total O(n^2), where n is the number
2194  * of makefiles that have been loaded.
2195  */
2196 static void
2197 TrackInput(const char *name)
2198 {
2199 	if (!VarContainsWord(".MAKE.MAKEFILES", name))
2200 		Global_Append(".MAKE.MAKEFILES", name);
2201 }
2202 
2203 
2204 /* Parse from the given buffer, later return to the current file. */
2205 void
2206 Parse_PushInput(const char *name, unsigned lineno, unsigned readLines,
2207 		Buffer buf, struct ForLoop *forLoop)
2208 {
2209 	IncludedFile *curFile;
2210 
2211 	if (forLoop != NULL)
2212 		name = CurFile()->name.str;
2213 	else
2214 		TrackInput(name);
2215 
2216 	DEBUG3(PARSE, "Parse_PushInput: %s %s, line %u\n",
2217 	    forLoop != NULL ? ".for loop in": "file", name, lineno);
2218 
2219 	curFile = Vector_Push(&includes);
2220 	curFile->name = FStr_InitOwn(bmake_strdup(name));
2221 	curFile->lineno = lineno;
2222 	curFile->readLines = readLines;
2223 	curFile->forHeadLineno = lineno;
2224 	curFile->forBodyReadLines = readLines;
2225 	curFile->buf = buf;
2226 	curFile->depending = doing_depend;	/* restore this on EOF */
2227 	curFile->guardState = forLoop == NULL ? GS_START : GS_NO;
2228 	curFile->guard = NULL;
2229 	curFile->forLoop = forLoop;
2230 
2231 	if (forLoop != NULL && !For_NextIteration(forLoop, &curFile->buf))
2232 		abort();	/* see For_Run */
2233 
2234 	curFile->buf_ptr = curFile->buf.data;
2235 	curFile->buf_end = curFile->buf.data + curFile->buf.len;
2236 	curFile->condMinDepth = cond_depth;
2237 	SetParseFile(name);
2238 }
2239 
2240 /* Check if the directive is an include directive. */
2241 static bool
2242 IsInclude(const char *dir, bool sysv)
2243 {
2244 	if (dir[0] == 's' || dir[0] == '-' || (dir[0] == 'd' && !sysv))
2245 		dir++;
2246 
2247 	if (strncmp(dir, "include", 7) != 0)
2248 		return false;
2249 
2250 	/* Space is not mandatory for BSD .include */
2251 	return !sysv || ch_isspace(dir[7]);
2252 }
2253 
2254 
2255 #ifdef SYSVINCLUDE
2256 /* Check if the line is a SYSV include directive. */
2257 static bool
2258 IsSysVInclude(const char *line)
2259 {
2260 	const char *p;
2261 
2262 	if (!IsInclude(line, true))
2263 		return false;
2264 
2265 	/* Avoid interpreting a dependency line as an include */
2266 	for (p = line; (p = strchr(p, ':')) != NULL;) {
2267 
2268 		/* end of line -> it's a dependency */
2269 		if (*++p == '\0')
2270 			return false;
2271 
2272 		/* '::' operator or ': ' -> it's a dependency */
2273 		if (*p == ':' || ch_isspace(*p))
2274 			return false;
2275 	}
2276 	return true;
2277 }
2278 
2279 /* Push to another file.  The line points to the word "include". */
2280 static void
2281 ParseTraditionalInclude(char *line)
2282 {
2283 	char *cp;		/* current position in file spec */
2284 	bool done = false;
2285 	bool silent = line[0] != 'i';
2286 	char *file = line + (silent ? 8 : 7);
2287 	char *all_files;
2288 
2289 	DEBUG1(PARSE, "ParseTraditionalInclude: %s\n", file);
2290 
2291 	pp_skip_whitespace(&file);
2292 
2293 	all_files = Var_Subst(file, SCOPE_CMDLINE, VARE_WANTRES);
2294 	/* TODO: handle errors */
2295 
2296 	for (file = all_files; !done; file = cp + 1) {
2297 		/* Skip to end of line or next whitespace */
2298 		for (cp = file; *cp != '\0' && !ch_isspace(*cp); cp++)
2299 			continue;
2300 
2301 		if (*cp != '\0')
2302 			*cp = '\0';
2303 		else
2304 			done = true;
2305 
2306 		IncludeFile(file, false, false, silent);
2307 	}
2308 
2309 	free(all_files);
2310 }
2311 #endif
2312 
2313 #ifdef GMAKEEXPORT
2314 /* Parse "export <variable>=<value>", and actually export it. */
2315 static void
2316 ParseGmakeExport(char *line)
2317 {
2318 	char *variable = line + 6;
2319 	char *value;
2320 
2321 	DEBUG1(PARSE, "ParseGmakeExport: %s\n", variable);
2322 
2323 	pp_skip_whitespace(&variable);
2324 
2325 	for (value = variable; *value != '\0' && *value != '='; value++)
2326 		continue;
2327 
2328 	if (*value != '=') {
2329 		Parse_Error(PARSE_FATAL,
2330 		    "Variable/Value missing from \"export\"");
2331 		return;
2332 	}
2333 	*value++ = '\0';	/* terminate variable */
2334 
2335 	/*
2336 	 * Expand the value before putting it in the environment.
2337 	 */
2338 	value = Var_Subst(value, SCOPE_CMDLINE, VARE_WANTRES);
2339 	/* TODO: handle errors */
2340 
2341 	setenv(variable, value, 1);
2342 	free(value);
2343 }
2344 #endif
2345 
2346 /*
2347  * Called when EOF is reached in the current file. If we were reading an
2348  * include file or a .for loop, the includes stack is popped and things set
2349  * up to go back to reading the previous file at the previous location.
2350  *
2351  * Results:
2352  *	true to continue parsing, i.e. it had only reached the end of an
2353  *	included file, false if the main file has been parsed completely.
2354  */
2355 static bool
2356 ParseEOF(void)
2357 {
2358 	IncludedFile *curFile = CurFile();
2359 
2360 	doing_depend = curFile->depending;
2361 	if (curFile->forLoop != NULL &&
2362 	    For_NextIteration(curFile->forLoop, &curFile->buf)) {
2363 		curFile->buf_ptr = curFile->buf.data;
2364 		curFile->buf_end = curFile->buf.data + curFile->buf.len;
2365 		curFile->readLines = curFile->forBodyReadLines;
2366 		return true;
2367 	}
2368 
2369 	Cond_EndFile();
2370 
2371 	if (curFile->guardState == GS_DONE)
2372 		HashTable_Set(&guards, curFile->name.str, curFile->guard);
2373 	else if (curFile->guard != NULL) {
2374 		free(curFile->guard->name);
2375 		free(curFile->guard);
2376 	}
2377 
2378 	FStr_Done(&curFile->name);
2379 	Buf_Done(&curFile->buf);
2380 	if (curFile->forLoop != NULL)
2381 		ForLoop_Free(curFile->forLoop);
2382 	Vector_Pop(&includes);
2383 
2384 	if (includes.len == 0) {
2385 		/* We've run out of input */
2386 		Global_Delete(".PARSEDIR");
2387 		Global_Delete(".PARSEFILE");
2388 		Global_Delete(".INCLUDEDFROMDIR");
2389 		Global_Delete(".INCLUDEDFROMFILE");
2390 		return false;
2391 	}
2392 
2393 	curFile = CurFile();
2394 	DEBUG2(PARSE, "ParseEOF: returning to file %s, line %u\n",
2395 	    curFile->name.str, curFile->readLines + 1);
2396 
2397 	SetParseFile(curFile->name.str);
2398 	return true;
2399 }
2400 
2401 typedef enum ParseRawLineResult {
2402 	PRLR_LINE,
2403 	PRLR_EOF,
2404 	PRLR_ERROR
2405 } ParseRawLineResult;
2406 
2407 /*
2408  * Parse until the end of a line, taking into account lines that end with
2409  * backslash-newline.  The resulting line goes from out_line to out_line_end;
2410  * the line is not null-terminated.
2411  */
2412 static ParseRawLineResult
2413 ParseRawLine(IncludedFile *curFile, char **out_line, char **out_line_end,
2414 	     char **out_firstBackslash, char **out_commentLineEnd)
2415 {
2416 	char *line = curFile->buf_ptr;
2417 	char *buf_end = curFile->buf_end;
2418 	char *p = line;
2419 	char *line_end = line;
2420 	char *firstBackslash = NULL;
2421 	char *commentLineEnd = NULL;
2422 	ParseRawLineResult res = PRLR_LINE;
2423 
2424 	curFile->readLines++;
2425 
2426 	for (;;) {
2427 		char ch;
2428 
2429 		if (p == buf_end) {
2430 			res = PRLR_EOF;
2431 			break;
2432 		}
2433 
2434 		ch = *p;
2435 		if (ch == '\0' || (ch == '\\' && p[1] == '\0')) {
2436 			Parse_Error(PARSE_FATAL, "Zero byte read from file");
2437 			return PRLR_ERROR;
2438 		}
2439 
2440 		/* Treat next character after '\' as literal. */
2441 		if (ch == '\\') {
2442 			if (firstBackslash == NULL)
2443 				firstBackslash = p;
2444 			if (p[1] == '\n') {
2445 				curFile->readLines++;
2446 				if (p + 2 == buf_end) {
2447 					line_end = p;
2448 					*line_end = '\n';
2449 					p += 2;
2450 					continue;
2451 				}
2452 			}
2453 			p += 2;
2454 			line_end = p;
2455 			assert(p <= buf_end);
2456 			continue;
2457 		}
2458 
2459 		/*
2460 		 * Remember the first '#' for comment stripping, unless
2461 		 * the previous char was '[', as in the modifier ':[#]'.
2462 		 */
2463 		if (ch == '#' && commentLineEnd == NULL &&
2464 		    !(p > line && p[-1] == '['))
2465 			commentLineEnd = line_end;
2466 
2467 		p++;
2468 		if (ch == '\n')
2469 			break;
2470 
2471 		/* We are not interested in trailing whitespace. */
2472 		if (!ch_isspace(ch))
2473 			line_end = p;
2474 	}
2475 
2476 	curFile->buf_ptr = p;
2477 	*out_line = line;
2478 	*out_line_end = line_end;
2479 	*out_firstBackslash = firstBackslash;
2480 	*out_commentLineEnd = commentLineEnd;
2481 	return res;
2482 }
2483 
2484 /*
2485  * Beginning at start, unescape '\#' to '#' and replace backslash-newline
2486  * with a single space.
2487  */
2488 static void
2489 UnescapeBackslash(char *line, char *start)
2490 {
2491 	const char *src = start;
2492 	char *dst = start;
2493 	char *spaceStart = line;
2494 
2495 	for (;;) {
2496 		char ch = *src++;
2497 		if (ch != '\\') {
2498 			if (ch == '\0')
2499 				break;
2500 			*dst++ = ch;
2501 			continue;
2502 		}
2503 
2504 		ch = *src++;
2505 		if (ch == '\0') {
2506 			/* Delete '\\' at the end of the buffer. */
2507 			dst--;
2508 			break;
2509 		}
2510 
2511 		/* Delete '\\' from before '#' on non-command lines. */
2512 		if (ch == '#' && line[0] != '\t')
2513 			*dst++ = ch;
2514 		else if (ch == '\n') {
2515 			cpp_skip_hspace(&src);
2516 			*dst++ = ' ';
2517 		} else {
2518 			/* Leave '\\' in the buffer for later. */
2519 			*dst++ = '\\';
2520 			*dst++ = ch;
2521 			/* Keep an escaped ' ' at the line end. */
2522 			spaceStart = dst;
2523 		}
2524 	}
2525 
2526 	/* Delete any trailing spaces - eg from empty continuations */
2527 	while (dst > spaceStart && ch_isspace(dst[-1]))
2528 		dst--;
2529 	*dst = '\0';
2530 }
2531 
2532 typedef enum LineKind {
2533 	/*
2534 	 * Return the next line that is neither empty nor a comment.
2535 	 * Backslash line continuations are folded into a single space.
2536 	 * A trailing comment, if any, is discarded.
2537 	 */
2538 	LK_NONEMPTY,
2539 
2540 	/*
2541 	 * Return the next line, even if it is empty or a comment.
2542 	 * Preserve backslash-newline to keep the line numbers correct.
2543 	 *
2544 	 * Used in .for loops to collect the body of the loop while waiting
2545 	 * for the corresponding .endfor.
2546 	 */
2547 	LK_FOR_BODY,
2548 
2549 	/*
2550 	 * Return the next line that starts with a dot.
2551 	 * Backslash line continuations are folded into a single space.
2552 	 * A trailing comment, if any, is discarded.
2553 	 *
2554 	 * Used in .if directives to skip over irrelevant branches while
2555 	 * waiting for the corresponding .endif.
2556 	 */
2557 	LK_DOT
2558 } LineKind;
2559 
2560 /*
2561  * Return the next "interesting" logical line from the current file.  The
2562  * returned string will be freed at the end of including the file.
2563  */
2564 static char *
2565 ReadLowLevelLine(LineKind kind)
2566 {
2567 	IncludedFile *curFile = CurFile();
2568 	ParseRawLineResult res;
2569 	char *line;
2570 	char *line_end;
2571 	char *firstBackslash;
2572 	char *commentLineEnd;
2573 
2574 	for (;;) {
2575 		curFile->lineno = curFile->readLines + 1;
2576 		res = ParseRawLine(curFile,
2577 		    &line, &line_end, &firstBackslash, &commentLineEnd);
2578 		if (res == PRLR_ERROR)
2579 			return NULL;
2580 
2581 		if (line == line_end || line == commentLineEnd) {
2582 			if (res == PRLR_EOF)
2583 				return NULL;
2584 			if (kind != LK_FOR_BODY)
2585 				continue;
2586 		}
2587 
2588 		/* We now have a line of data */
2589 		assert(ch_isspace(*line_end));
2590 		*line_end = '\0';
2591 
2592 		if (kind == LK_FOR_BODY)
2593 			return line;	/* Don't join the physical lines. */
2594 
2595 		if (kind == LK_DOT && line[0] != '.')
2596 			continue;
2597 		break;
2598 	}
2599 
2600 	if (commentLineEnd != NULL && line[0] != '\t')
2601 		*commentLineEnd = '\0';
2602 	if (firstBackslash != NULL)
2603 		UnescapeBackslash(line, firstBackslash);
2604 	return line;
2605 }
2606 
2607 static bool
2608 SkipIrrelevantBranches(void)
2609 {
2610 	const char *line;
2611 
2612 	while ((line = ReadLowLevelLine(LK_DOT)) != NULL) {
2613 		if (Cond_EvalLine(line) == CR_TRUE)
2614 			return true;
2615 		/*
2616 		 * TODO: Check for typos in .elif directives such as .elsif
2617 		 * or .elseif.
2618 		 *
2619 		 * This check will probably duplicate some of the code in
2620 		 * ParseLine.  Most of the code there cannot apply, only
2621 		 * ParseVarassign and ParseDependencyLine can, and to prevent
2622 		 * code duplication, these would need to be called with a
2623 		 * flag called onlyCheckSyntax.
2624 		 *
2625 		 * See directive-elif.mk for details.
2626 		 */
2627 	}
2628 
2629 	return false;
2630 }
2631 
2632 static bool
2633 ParseForLoop(const char *line)
2634 {
2635 	int rval;
2636 	unsigned forHeadLineno;
2637 	unsigned bodyReadLines;
2638 	int forLevel;
2639 
2640 	rval = For_Eval(line);
2641 	if (rval == 0)
2642 		return false;	/* Not a .for line */
2643 	if (rval < 0)
2644 		return true;	/* Syntax error - error printed, ignore line */
2645 
2646 	forHeadLineno = CurFile()->lineno;
2647 	bodyReadLines = CurFile()->readLines;
2648 
2649 	/* Accumulate the loop body until the matching '.endfor'. */
2650 	forLevel = 1;
2651 	do {
2652 		line = ReadLowLevelLine(LK_FOR_BODY);
2653 		if (line == NULL) {
2654 			Parse_Error(PARSE_FATAL,
2655 			    "Unexpected end of file in .for loop");
2656 			break;
2657 		}
2658 	} while (For_Accum(line, &forLevel));
2659 
2660 	For_Run(forHeadLineno, bodyReadLines);
2661 	return true;
2662 }
2663 
2664 /*
2665  * Read an entire line from the input file.
2666  *
2667  * Empty lines, .if and .for are completely handled by this function,
2668  * leaving only variable assignments, other directives, dependency lines
2669  * and shell commands to the caller.
2670  *
2671  * Return a line without trailing whitespace, or NULL for EOF.  The returned
2672  * string will be freed at the end of including the file.
2673  */
2674 static char *
2675 ReadHighLevelLine(void)
2676 {
2677 	char *line;
2678 	CondResult condResult;
2679 
2680 	for (;;) {
2681 		IncludedFile *curFile = CurFile();
2682 		line = ReadLowLevelLine(LK_NONEMPTY);
2683 		if (posix_state == PS_MAYBE_NEXT_LINE)
2684 			posix_state = PS_NOW_OR_NEVER;
2685 		else
2686 			posix_state = PS_TOO_LATE;
2687 		if (line == NULL)
2688 			return NULL;
2689 
2690 		if (curFile->guardState != GS_NO
2691 		    && ((curFile->guardState == GS_START && line[0] != '.')
2692 			|| curFile->guardState == GS_DONE))
2693 			curFile->guardState = GS_NO;
2694 		if (line[0] != '.')
2695 			return line;
2696 
2697 		condResult = Cond_EvalLine(line);
2698 		if (curFile->guardState == GS_START) {
2699 			Guard *guard;
2700 			if (condResult != CR_ERROR
2701 			    && (guard = Cond_ExtractGuard(line)) != NULL) {
2702 				curFile->guardState = GS_COND;
2703 				curFile->guard = guard;
2704 			} else
2705 				curFile->guardState = GS_NO;
2706 		}
2707 		switch (condResult) {
2708 		case CR_FALSE:	/* May also mean a syntax error. */
2709 			if (!SkipIrrelevantBranches())
2710 				return NULL;
2711 			continue;
2712 		case CR_TRUE:
2713 			continue;
2714 		case CR_ERROR:	/* Not a conditional line */
2715 			if (ParseForLoop(line))
2716 				continue;
2717 			break;
2718 		}
2719 		return line;
2720 	}
2721 }
2722 
2723 static void
2724 FinishDependencyGroup(void)
2725 {
2726 	GNodeListNode *ln;
2727 
2728 	if (targets == NULL)
2729 		return;
2730 
2731 	for (ln = targets->first; ln != NULL; ln = ln->next) {
2732 		GNode *gn = ln->datum;
2733 
2734 		Suff_EndTransform(gn);
2735 
2736 		/*
2737 		 * Mark the target as already having commands if it does, to
2738 		 * keep from having shell commands on multiple dependency
2739 		 * lines.
2740 		 */
2741 		if (!Lst_IsEmpty(&gn->commands))
2742 			gn->type |= OP_HAS_COMMANDS;
2743 	}
2744 
2745 	Lst_Free(targets);
2746 	targets = NULL;
2747 }
2748 
2749 /* Add the command to each target from the current dependency spec. */
2750 static void
2751 ParseLine_ShellCommand(const char *p)
2752 {
2753 	cpp_skip_whitespace(&p);
2754 	if (*p == '\0')
2755 		return;		/* skip empty commands */
2756 
2757 	if (targets == NULL) {
2758 		Parse_Error(PARSE_FATAL,
2759 		    "Unassociated shell command \"%s\"", p);
2760 		return;
2761 	}
2762 
2763 	{
2764 		char *cmd = bmake_strdup(p);
2765 		GNodeListNode *ln;
2766 
2767 		for (ln = targets->first; ln != NULL; ln = ln->next) {
2768 			GNode *gn = ln->datum;
2769 			GNode_AddCommand(gn, cmd);
2770 		}
2771 #ifdef CLEANUP
2772 		Lst_Append(&targCmds, cmd);
2773 #endif
2774 	}
2775 }
2776 
2777 static void
2778 HandleBreak(const char *arg)
2779 {
2780 	IncludedFile *curFile = CurFile();
2781 
2782 	if (arg[0] != '\0')
2783 		Parse_Error(PARSE_FATAL,
2784 		    "The .break directive does not take arguments");
2785 
2786 	if (curFile->forLoop != NULL) {
2787 		/* pretend we reached EOF */
2788 		For_Break(curFile->forLoop);
2789 		cond_depth = CurFile_CondMinDepth();
2790 		ParseEOF();
2791 	} else
2792 		Parse_Error(PARSE_FATAL, "break outside of for loop");
2793 }
2794 
2795 /*
2796  * See if the line starts with one of the known directives, and if so, handle
2797  * the directive.
2798  */
2799 static bool
2800 ParseDirective(char *line)
2801 {
2802 	char *cp = line + 1;
2803 	const char *arg;
2804 	Substring dir;
2805 
2806 	pp_skip_whitespace(&cp);
2807 	if (IsInclude(cp, false)) {
2808 		ParseInclude(cp);
2809 		return true;
2810 	}
2811 
2812 	dir.start = cp;
2813 	while (ch_islower(*cp) || *cp == '-')
2814 		cp++;
2815 	dir.end = cp;
2816 
2817 	if (*cp != '\0' && !ch_isspace(*cp))
2818 		return false;
2819 
2820 	pp_skip_whitespace(&cp);
2821 	arg = cp;
2822 
2823 	if (Substring_Equals(dir, "break"))
2824 		HandleBreak(arg);
2825 	else if (Substring_Equals(dir, "undef"))
2826 		Var_Undef(arg);
2827 	else if (Substring_Equals(dir, "export"))
2828 		Var_Export(VEM_PLAIN, arg);
2829 	else if (Substring_Equals(dir, "export-env"))
2830 		Var_Export(VEM_ENV, arg);
2831 	else if (Substring_Equals(dir, "export-literal"))
2832 		Var_Export(VEM_LITERAL, arg);
2833 	else if (Substring_Equals(dir, "unexport"))
2834 		Var_UnExport(false, arg);
2835 	else if (Substring_Equals(dir, "unexport-env"))
2836 		Var_UnExport(true, arg);
2837 	else if (Substring_Equals(dir, "info"))
2838 		HandleMessage(PARSE_INFO, "info", arg);
2839 	else if (Substring_Equals(dir, "warning"))
2840 		HandleMessage(PARSE_WARNING, "warning", arg);
2841 	else if (Substring_Equals(dir, "error"))
2842 		HandleMessage(PARSE_FATAL, "error", arg);
2843 	else
2844 		return false;
2845 	return true;
2846 }
2847 
2848 bool
2849 Parse_VarAssign(const char *line, bool finishDependencyGroup, GNode *scope)
2850 {
2851 	VarAssign var;
2852 
2853 	if (!Parse_IsVar(line, &var))
2854 		return false;
2855 	if (finishDependencyGroup)
2856 		FinishDependencyGroup();
2857 	Parse_Var(&var, scope);
2858 	free(var.varname);
2859 	return true;
2860 }
2861 
2862 void
2863 Parse_GuardElse(void)
2864 {
2865 	IncludedFile *curFile = CurFile();
2866 	if (cond_depth == curFile->condMinDepth + 1)
2867 		curFile->guardState = GS_NO;
2868 }
2869 
2870 void
2871 Parse_GuardEndif(void)
2872 {
2873 	IncludedFile *curFile = CurFile();
2874 	if (cond_depth == curFile->condMinDepth
2875 	    && curFile->guardState == GS_COND)
2876 		curFile->guardState = GS_DONE;
2877 }
2878 
2879 static char *
2880 FindSemicolon(char *p)
2881 {
2882 	int level = 0;
2883 
2884 	for (; *p != '\0'; p++) {
2885 		if (*p == '\\' && p[1] != '\0') {
2886 			p++;
2887 			continue;
2888 		}
2889 
2890 		if (*p == '$' && (p[1] == '(' || p[1] == '{'))
2891 			level++;
2892 		else if (level > 0 && (*p == ')' || *p == '}'))
2893 			level--;
2894 		else if (level == 0 && *p == ';')
2895 			break;
2896 	}
2897 	return p;
2898 }
2899 
2900 /*
2901  * dependency	-> [target...] op [source...] [';' command]
2902  * op		-> ':' | '::' | '!'
2903  */
2904 static void
2905 ParseDependencyLine(char *line)
2906 {
2907 	VarEvalMode emode;
2908 	char *expanded_line;
2909 	const char *shellcmd = NULL;
2910 
2911 	/*
2912 	 * For some reason - probably to make the parser impossible -
2913 	 * a ';' can be used to separate commands from dependencies.
2914 	 * Attempt to skip over ';' inside substitution patterns.
2915 	 */
2916 	{
2917 		char *semicolon = FindSemicolon(line);
2918 		if (*semicolon != '\0') {
2919 			/* Terminate the dependency list at the ';' */
2920 			*semicolon = '\0';
2921 			shellcmd = semicolon + 1;
2922 		}
2923 	}
2924 
2925 	/*
2926 	 * We now know it's a dependency line so it needs to have all
2927 	 * variables expanded before being parsed.
2928 	 *
2929 	 * XXX: Ideally the dependency line would first be split into
2930 	 * its left-hand side, dependency operator and right-hand side,
2931 	 * and then each side would be expanded on its own.  This would
2932 	 * allow for the left-hand side to allow only defined variables
2933 	 * and to allow variables on the right-hand side to be undefined
2934 	 * as well.
2935 	 *
2936 	 * Parsing the line first would also prevent that targets
2937 	 * generated from variable expressions are interpreted as the
2938 	 * dependency operator, such as in "target${:U\:} middle: source",
2939 	 * in which the middle is interpreted as a source, not a target.
2940 	 */
2941 
2942 	/*
2943 	 * In lint mode, allow undefined variables to appear in dependency
2944 	 * lines.
2945 	 *
2946 	 * Ideally, only the right-hand side would allow undefined variables
2947 	 * since it is common to have optional dependencies. Having undefined
2948 	 * variables on the left-hand side is more unusual though.  Since
2949 	 * both sides are expanded in a single pass, there is not much choice
2950 	 * what to do here.
2951 	 *
2952 	 * In normal mode, it does not matter whether undefined variables are
2953 	 * allowed or not since as of 2020-09-14, Var_Parse does not print
2954 	 * any parse errors in such a case. It simply returns the special
2955 	 * empty string var_Error, which cannot be detected in the result of
2956 	 * Var_Subst.
2957 	 */
2958 	emode = opts.strict ? VARE_WANTRES : VARE_UNDEFERR;
2959 	expanded_line = Var_Subst(line, SCOPE_CMDLINE, emode);
2960 	/* TODO: handle errors */
2961 
2962 	/* Need a fresh list for the target nodes */
2963 	if (targets != NULL)
2964 		Lst_Free(targets);
2965 	targets = Lst_New();
2966 
2967 	ParseDependency(expanded_line);
2968 	free(expanded_line);
2969 
2970 	if (shellcmd != NULL)
2971 		ParseLine_ShellCommand(shellcmd);
2972 }
2973 
2974 static void
2975 ParseLine(char *line)
2976 {
2977 	/*
2978 	 * Lines that begin with '.' can be pretty much anything:
2979 	 *	- directives like '.include' or '.if',
2980 	 *	- suffix rules like '.c.o:',
2981 	 *	- dependencies for filenames that start with '.',
2982 	 *	- variable assignments like '.tmp=value'.
2983 	 */
2984 	if (line[0] == '.' && ParseDirective(line))
2985 		return;
2986 
2987 	if (line[0] == '\t') {
2988 		ParseLine_ShellCommand(line + 1);
2989 		return;
2990 	}
2991 
2992 #ifdef SYSVINCLUDE
2993 	if (IsSysVInclude(line)) {
2994 		/*
2995 		 * It's an S3/S5-style "include".
2996 		 */
2997 		ParseTraditionalInclude(line);
2998 		return;
2999 	}
3000 #endif
3001 
3002 #ifdef GMAKEEXPORT
3003 	if (strncmp(line, "export", 6) == 0 && ch_isspace(line[6]) &&
3004 	    strchr(line, ':') == NULL) {
3005 		/*
3006 		 * It's a Gmake "export".
3007 		 */
3008 		ParseGmakeExport(line);
3009 		return;
3010 	}
3011 #endif
3012 
3013 	if (Parse_VarAssign(line, true, SCOPE_GLOBAL))
3014 		return;
3015 
3016 	FinishDependencyGroup();
3017 
3018 	ParseDependencyLine(line);
3019 }
3020 
3021 /*
3022  * Parse a top-level makefile, incorporating its content into the global
3023  * dependency graph.
3024  */
3025 void
3026 Parse_File(const char *name, int fd)
3027 {
3028 	char *line;
3029 	Buffer buf;
3030 
3031 	buf = LoadFile(name, fd != -1 ? fd : STDIN_FILENO);
3032 	if (fd != -1)
3033 		(void)close(fd);
3034 
3035 	assert(targets == NULL);
3036 
3037 	Parse_PushInput(name, 1, 0, buf, NULL);
3038 
3039 	do {
3040 		while ((line = ReadHighLevelLine()) != NULL) {
3041 			DEBUG2(PARSE, "Parsing line %u: %s\n",
3042 			    CurFile()->lineno, line);
3043 			ParseLine(line);
3044 		}
3045 		/* Reached EOF, but it may be just EOF of an include file. */
3046 	} while (ParseEOF());
3047 
3048 	FinishDependencyGroup();
3049 
3050 	if (parseErrors != 0) {
3051 		(void)fflush(stdout);
3052 		(void)fprintf(stderr,
3053 		    "%s: Fatal errors encountered -- cannot continue\n",
3054 		    progname);
3055 		PrintOnError(NULL, "");
3056 		exit(1);
3057 	}
3058 }
3059 
3060 /* Initialize the parsing module. */
3061 void
3062 Parse_Init(void)
3063 {
3064 	mainNode = NULL;
3065 	parseIncPath = SearchPath_New();
3066 	sysIncPath = SearchPath_New();
3067 	defSysIncPath = SearchPath_New();
3068 	Vector_Init(&includes, sizeof(IncludedFile));
3069 	HashTable_Init(&guards);
3070 }
3071 
3072 /* Clean up the parsing module. */
3073 void
3074 Parse_End(void)
3075 {
3076 #ifdef CLEANUP
3077 	HashIter hi;
3078 
3079 	Lst_DoneCall(&targCmds, free);
3080 	assert(targets == NULL);
3081 	SearchPath_Free(defSysIncPath);
3082 	SearchPath_Free(sysIncPath);
3083 	SearchPath_Free(parseIncPath);
3084 	assert(includes.len == 0);
3085 	Vector_Done(&includes);
3086 	HashIter_Init(&hi, &guards);
3087 	while (HashIter_Next(&hi) != NULL) {
3088 		Guard *guard = hi.entry->value;
3089 		free(guard->name);
3090 		free(guard);
3091 	}
3092 	HashTable_Done(&guards);
3093 #endif
3094 }
3095 
3096 
3097 /* Populate the list with the single main target to create, or error out. */
3098 void
3099 Parse_MainName(GNodeList *mainList)
3100 {
3101 	if (mainNode == NULL)
3102 		Punt("no target to make.");
3103 
3104 	Lst_Append(mainList, mainNode);
3105 	if (mainNode->type & OP_DOUBLEDEP)
3106 		Lst_AppendAll(mainList, &mainNode->cohorts);
3107 
3108 	Global_Append(".TARGETS", mainNode->name);
3109 }
3110 
3111 int
3112 Parse_NumErrors(void)
3113 {
3114 	return parseErrors;
3115 }
3116