1# $NetBSD: varmod-assign.mk,v 1.19 2024/01/07 11:42:22 rillig Exp $ 2# 3# Tests for the obscure ::= variable modifiers, which perform variable 4# assignments during evaluation, just like the = operator in C. 5 6.if !make(target) 7 8all: mod-assign-empty 9all: mod-assign-parse 10all: mod-assign-shell-error 11 12# In the following loop expression, 13# the '::?=' modifier applies the assignment operator '?=' 3 times. The 14# operator '?=' only has an effect for the first time, therefore the variable 15# FIRST ends up with the value 1. 16.if "${1 2 3:L:@i@${FIRST::?=$i}@} first=${FIRST}" != " first=1" 17. error 18.endif 19 20# In the following loop expression, 21# the modifier '::=' applies the assignment operator '=' 3 times. The 22# operator '=' overwrites the previous value, therefore the variable LAST ends 23# up with the value 3. 24.if "${1 2 3:L:@i@${LAST::=$i}@} last=${LAST}" != " last=3" 25. error 26.endif 27 28# In the following loop expression, 29# the modifier '::+=' applies the assignment operator '+=' 3 times. The 30# operator '+=' appends 3 times to the variable, therefore the variable 31# APPENDED ends up with the value "1 2 3". 32.if "${1 2 3:L:@i@${APPENDED::+=$i}@} appended=${APPENDED}" != " appended=1 2 3" 33. error 34.endif 35 36# In the following loop expression, 37# the modifier '::!=' applies the assignment operator '!=' 3 times. Just as 38# with the modifier '::=', the last value is stored in the RAN variable. 39.if "${1 2 3:L:@i@${RAN::!=${i:%=echo '<%>';}}@} ran=${RAN}" != " ran=<3>" 40. error 41.endif 42 43# When a '::=' modifier is evaluated as part of an .if condition, it happens 44# in the command line scope. 45.if "${FIRST}, ${LAST}, ${APPENDED}, ${RAN}" != "1, 3, 1 2 3, <3>" 46. error 47.endif 48 49# Tests for nested assignments, which are hard to read and therefore seldom 50# used in practice. 51 52# The condition "1" is true, therefore THEN1 gets assigned a value, 53# and the inner IT1 as well. Nothing surprising here. 54.if "${1:?${THEN1::=then1${IT1::=t1}}:${ELSE1::=else1${IE1::=e1}}} ${THEN1}${ELSE1}${IT1}${IE1}" != " then1t1" 55. error 56.endif 57 58# The condition "0" is false, therefore ELSE2 gets assigned a value, 59# and the inner IE2 as well. Nothing surprising here as well. 60.if "${0:?${THEN2::=then2${IT2::=t2}}:${ELSE2::=else2${IE2::=e2}}} ${THEN2}${ELSE2}${IT2}${IE2}" != " else2e2" 61. error 62.endif 63 64# The same effects happen when the variables are defined elsewhere. 65SINK3:= ${1:?${THEN3::=then3${IT3::=t3}}:${ELSE3::=else3${IE3::=e3}}} ${THEN3}${ELSE3}${IT3}${IE3} 66SINK4:= ${0:?${THEN4::=then4${IT4::=t4}}:${ELSE4::=else4${IE4::=e4}}} ${THEN4}${ELSE4}${IT4}${IE4} 67.if ${SINK3} != " then3t3" 68. error 69.endif 70.if ${SINK4} != " else4e4" 71. error 72.endif 73 74mod-assign-empty: 75 # Assigning to the empty variable would obviously not work since that 76 # variable is write-protected. Therefore it is rejected early with a 77 # "Bad modifier" message. 78 @echo $@: ${::=value} 79 80 # In this variant, it is not as obvious that the name of the 81 # expression is empty. Assigning to it is rejected as well, with the 82 # same "Bad modifier" message. 83 @echo $@: ${:Uvalue::=overwritten} 84 85 # The :L modifier sets the value of the expression to its variable 86 # name. The name of the expression is "VAR", therefore assigning to 87 # that variable works. 88 @echo $@: ${VAR:L::=overwritten} VAR=${VAR} 89 90mod-assign-parse: 91 # The modifier for assignment operators starts with a ':'. 92 # An 'x' after that is an invalid modifier. 93 # expect: make: Unknown modifier ":x" 94 @echo ${ASSIGN::x} 95 96 # When parsing an assignment operator fails because the operator is 97 # incomplete, make falls back to the SysV modifier. 98 @echo ${SYSV::=sysv\:x}${SYSV::x=:y} 99 100 @echo ${ASSIGN::=value # missing closing brace 101 102mod-assign-shell-error: 103 # If the command succeeds, the variable is assigned. 104 @${SH_OK::!= echo word; true } echo ok=${SH_OK} 105 106 # If the command fails, the variable keeps its previous value. 107 @${SH_ERR::=previous} 108 @${SH_ERR::!= echo word; false } echo err=${SH_ERR} 109 110# XXX: The ::= modifier expands its right-hand side exactly once. 111# This differs subtly from normal assignments such as '+=' or '=', which copy 112# their right-hand side literally. 113APPEND.prev= previous 114APPEND.var= ${APPEND.prev} 115APPEND.indirect= indirect $${:Unot expanded} 116APPEND.dollar= $${APPEND.indirect} 117.if ${APPEND.var::+=${APPEND.dollar}} != "" 118. error 119.endif 120.if ${APPEND.var} != "previous indirect \${:Unot expanded}" 121. error 122.endif 123 124 125# The assignment modifier can be used in an expression that is 126# enclosed in parentheses. In such a case, parsing stops at the first ')', 127# not at the first '}'. 128VAR= previous 129_:= $(VAR::=current}) 130.if ${VAR} != "current}" 131. error 132.endif 133 134 135# Before var.c 1.888 from 2021-03-15, an expression using the modifier '::=' 136# expanded its variable name once too often during evaluation. This was only 137# relevant for variable names containing a '$' sign in their actual name, not 138# the usual VAR.${param}. 139.MAKEFLAGS: -dv 140param= twice 141VARNAME= VAR.$${param} # Indirect variable name because of the '$', 142 # to avoid difficult escaping rules. 143 144${VARNAME}= initial-value # Sets 'VAR.${param}' to 'expanded'. 145.if defined(VAR.twice) # At this point, the '$$' is not expanded. 146. error 147.endif 148.if ${${VARNAME}::=assigned-value} # Here the variable name gets expanded once 149. error # too often. 150.endif 151.if defined(VAR.twice) 152. error The variable name in the '::=' modifier is expanded once too often. 153.endif 154.if ${${VARNAME}} != "assigned-value" 155. error 156.endif 157.MAKEFLAGS: -d0 158 159 160# Conditional directives are evaluated in command line scope. An assignment 161# modifier that creates a new variable creates it in the command line scope. 162# Existing variables are updated in their previous scope, and environment 163# variables are created in the global scope, as in other situations. 164.MAKEFLAGS: CMD_CMD_VAR=cmd-value 165CMD_GLOBAL_VAR=global-value 166export CMD_ENV_VAR=env-value 167.MAKEFLAGS: -dv 168# expect-reset 169# expect: Command: CMD_CMD_VAR = new-value 170# expect: Global: CMD_GLOBAL_VAR = new-value 171# expect: Global: CMD_ENV_VAR = new-value 172# expect: Global: ignoring delete 'CMD_NEW_VAR' as it is not found 173# expect: Command: CMD_NEW_VAR = new-value 174.if ${CMD_CMD_VAR::=new-value} \ 175 || ${CMD_GLOBAL_VAR::=new-value} \ 176 || ${CMD_ENV_VAR::=new-value} \ 177 || "${CMD_NEW_VAR::=new-value}" 178. error 179.endif 180.MAKEFLAGS: -d0 181 182# Run the 'target' test in a separate sub-make, with reduced debug logging. 183all: run-target 184run-target: .PHONY 185 @${MAKE} -r -f ${MAKEFILE} -dv target 2>&1 | grep ': TARGET_' 186 187.else # make(target) 188 189# The commands of a target are evaluated in target scope. An assignment 190# modifier that creates a new variable creates it in the target scope. 191# Existing variables are updated in their previous scope, and environment 192# variables are created in the global scope, as in other situations. 193# 194# expect: target: TARGET_TARGET_VAR = new-value 195# expect: Global: TARGET_GLOBAL_VAR = new-value 196# expect: Global: TARGET_ENV_VAR = new-value 197# expect: target: TARGET_NEW_VAR = new-value 198.MAKEFLAGS: TARGET_CMD_VAR=cmd-value 199TARGET_GLOBAL_VAR=global-value 200export TARGET_ENV_VAR=env-value 201target: .PHONY TARGET_TARGET_VAR=target-value 202 : ${TARGET_TARGET_VAR::=new-value} 203 : ${TARGET_CMD_VAR::=new-value} 204 : ${TARGET_GLOBAL_VAR::=new-value} 205 : ${TARGET_ENV_VAR::=new-value} 206 : ${TARGET_NEW_VAR::=new-value} 207 208.endif 209