1######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE 2# 3# This version of terminfo.src is distributed with ncurses and is maintained 4# by Thomas E. Dickey (TD). 5# 6# Report bugs and new terminal descriptions to 7# bug-ncurses@gnu.org 8# 9# $Revision: 1.303 $ 10# $Date: 2006/10/07 17:52:03 $ 11# 12# The original header is preserved below for reference. It is noted that there 13# is a "newer" version which differs in some cosmetic details (but actually 14# stopped updates several years ago); we have decided to not change the header 15# unless there is also a change in content. 16# 17# To further muddy the waters, it is noted that changes to this file as part of 18# maintenance of ncurses (since 1996) are generally conceded to be copyright 19# under the ncurses MIT-style license. That was the effect of the agreement 20# which the principal authors of ncurses made in 1998. However, since much of 21# the file itself is of unknown authorship (and the disclaimer below makes it 22# obvious that Raymond cannot or will not convey rights over those parts), 23# there is no explicit copyright notice on the file itself. 24# 25# It would also be a nuisance to split the file into unknown/known authorship 26# and move pieces as they are maintained, since many of the maintenance changes 27# have been small corrections to Raymond's translations to/from termcap format, 28# correcting the data but not the accompanying annotations. 29# 30# In any case, note that almost half of this file is not data but annotations 31# which reflect creative effort. Furthermore, the structure of entries to 32# reuse common chunks also is creative (and subject to copyright). Finally, 33# some portions of the data are derivative work under a compatible MIT-style 34# license from xterm. 35# 36#------------------------------------------------------------------------------ 37# Version 10.2.1 38# terminfo syntax 39# 40# Eric S. Raymond (current maintainer) 41# John Kunze, Berkeley 42# Craig Leres, Berkeley 43# 44# Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu 45# address is no longer valid. The latest version can always be found at 46# <http://www.tuxedo.org/terminfo>. 47# 48# PURPOSE OF THIS FILE: 49# 50# This file describes the capabilities of various character-cell terminals, 51# as needed by software such as screen-oriented editors. 52# 53# Other terminfo and termcap files exist, supported by various OS vendors 54# or as relics of various older versions of UNIX. This one is the longest 55# and most comprehensive one in existence. It subsumes not only the entirety 56# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL 57# termcap file, but also large numbers of vendor-maintained termcap and 58# terminfo entries more complete and carefully tested than those in historical 59# termcap/terminfo versions. 60# 61# Pointers to related resources (including the ncurses distribution) may 62# be found at <http://www.tuxedo.org/terminfo>. 63# 64# INTERNATIONALIZATION: 65# 66# This file uses only the US-ASCII character set (no ISO8859 characters). 67# 68# This file assumes a US-ASCII character set. If you need to fix this, start 69# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers 70# for your character set. \E(A and \E)A enables the British character set 71# with the pound sign at position 2/3. 72# 73# In a Japanese-processing environment using EUC/Japanese or Shift-JIS, 74# C1 characters are considered the first-byte set of the Japanese encodings, 75# so \E)0 should be avoided in <enacs> and initialization strings. 76# 77# FILE FORMAT: 78# 79# The version you are looking at may be in any of three formats: master 80# (terminfo with OT capabilities), stock terminfo, or termcap. You can tell 81# which by the format given in the header above. 82# 83# The master format is accepted and generated by the terminfo tools in the 84# ncurses suite; it differs from stock (System V-compatible) terminfo only 85# in that it admits a group of capabilities (prefixed `OT') equivalent to 86# various obsolete termcap capabilities. You can, thus, convert from master 87# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if 88# you have ncurses `tic -I' is nicer (among other things, it automatically 89# outputs entries in a canonical form). 90# 91# The termcap version is generated automatically from the master version 92# using tic -C. This filtering leaves in the OT capabilities under their 93# original termcap names. All translated entries fit within the 1023-byte 94# string-table limit of archaic termcap libraries except where explicitly 95# noted below. Note that the termcap translation assumes that your termcap 96# library can handle multiple tc capabilities in an entry. 4.4BSD has this 97# capability. Older versions of GNU termcap, through 1.3, do not. 98# 99# For details on these formats, see terminfo(5) in the ncurses distribution, 100# and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD 101# curses has been declared obsolete by the caretakers of the 4.4BSD sources 102# as of June 1995; they are encouraging everyone to migrate to ncurses. 103# 104# Note: unlike some other distributed terminfo files (Novell Unix & SCO's), 105# no entry in this file has embedded comments. This is so source translation 106# to termcap only has to carry over leading comments. Also, no name field 107# contains embedded whitespace (such whitespace confuses rdist). 108# 109# Further note: older versions of this file were often installed with an editor 110# script (reorder) that moved the most common terminal types to the front of 111# the file. This should no longer be necessary, as the file is now ordered 112# roughly by type frequency with ANSI/VT100 and other common types up front. 113# 114# Some information has been merged in from terminfo files distributed by 115# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information 116# comes from vendors who maintain official terminfos for their hardware 117# (notably DEC and Wyse). 118# 119# A detailed change history is included at the end of this file. 120# 121# FILE ORGANIZATION: 122# 123# Comments in this file begin with # - they cannot appear in the middle 124# of a terminfo/termcap entry (this feature had to be sacrificed in order 125# to allow standard terminfo and termcap syntax to be generated cleanly from 126# the master format). Individual capabilities are commented out by 127# placing a period between the colon and the capability name. 128# 129# The file is divided up into major sections (headed by lines beginning with 130# the string "########") and minor sections (beginning with "####"); do 131# 132# grep "^####" <file> | more 133# 134# to see a listing of section headings. The intent of the divisions is 135# (a) to make it easier to find things, and (b) to order the database so 136# that important and frequently-encountered terminal types are near the 137# front (so that you'll get reasonable search efficiency from a linear 138# search of the termcap form even if you don't use reorder). Minor sections 139# usually correspond to manufacturers or standard terminal classes. 140# Parenthesized words following manufacturer names are type prefixes or 141# product line names used by that manufacturers. 142# 143# HOW TO READ THE ENTRIES: 144# 145# The first name in an entry is the canonical name for the model or 146# type, last entry is a verbose description. Others are mnemonic synonyms for 147# the terminal. 148# 149# Terminal names look like <manufacturer> <model> - <modes/options> 150# The part to the left of the dash, if a dash is present, describes the 151# particular hardware of the terminal. The part to the right may be used 152# for flags indicating special ROMs, extra memory, particular terminal modes, 153# or user preferences. 154# 155# All names should be in lower case, for consistency in typing. 156# 157# The following are conventionally used suffixes: 158# -2p Has two pages of memory. Likewise 4p, 8p, etc. 159# -am Enable auto-margin. 160# -m Monochrome. Suppress color support 161# -mc Magic-cookie. Some terminals (notably older Wyses) can 162# only support one attribute without magic-cookie lossage. 163# Their base entry is usually paired with another that 164# uses magic cookies to support multiple attributes. 165# -nam No auto-margin - suppress <am> capability 166# -nl No labels - suppress soft labels 167# -ns No status line - suppress status line 168# -rv Terminal in reverse video mode (black on white) 169# -s Enable status line. 170# -vb Use visible bell (<flash>) rather than <bel>. 171# -w Wide - in 132 column mode. 172# If a name has multiple suffixes and one is a line height, that one should 173# go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'. 174# 175# Entries with embedded plus signs are designed to be included through use/tc 176# capabilities, not used as standalone entries. 177# 178# To avoid search clashes, some older all-numeric names for terminals have 179# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621). 180# All primary names of terminals now have alphanumeric prefixes. 181# 182# Comments marked "esr" are mostly results of applying the termcap-compiler 183# code packaged with ncurses and contemplating the resulting error messages. 184# In many cases, these indicated obvious fixes to syntax garbled by the 185# composers. In a few cases, I was able to deduce corrected forms for garbled 186# capabilities by looking at context. All the information in the original 187# entries is preserved in the comments. 188# 189# In the comments, terminfo capability names are bracketed with <> (angle 190# brackets). Termcap capability names are bracketed with :: (colons). 191# 192# INTERPRETATION OF USER CAPABILITIES 193# 194# The System V Release 4 and XPG4 terminfo format defines ten string 195# capabilities for use by applications, <u0>...<u9>. In this file, we use 196# certain of these capabilities to describe functions which are not covered 197# by terminfo. The mapping is as follows: 198# 199# u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA) 200# u8 terminal answerback description 201# u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6) 202# u6 cursor position report (equiv. to ANSI/ECMA-48 CPR) 203# 204# The terminal enquire string <u9> should elicit an answerback response 205# from the terminal. Common values for <u9> will be ^E (on older ASCII 206# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals). 207# 208# The cursor position request (<u7>) string should elicit a cursor position 209# report. A typical value (for VT100 terminals) is \E[6n. 210# 211# The terminal answerback description (u8) must consist of an expected 212# answerback string. The string may contain the following scanf(3)-like 213# escapes: 214# 215# %c Accept any character 216# %[...] Accept any number of characters in the given set 217# 218# The cursor position report (<u6>) string must contain two scanf(3)-style 219# %d format elements. The first of these must correspond to the Y coordinate 220# and the second to the %d. If the string contains the sequence %i, it is 221# taken as an instruction to decrement each value after reading it (this is 222# the inverse sense from the cup string). The typical CPR value is 223# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals). 224# 225# These capabilities are used by tack(1m), the terminfo action checker 226# (distributed with ncurses 5.0). 227# 228# TABSET FILES 229# 230# All the entries in this file have been edited to assume that the tabset 231# files directory is /usr/share/tabset, in conformance with the File Hierarchy 232# Standard for Linux and open-source BSD systems. Some vendors (notably Sun) 233# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset. 234# 235# No curses package we know of actually uses these files. If their location 236# is an issue, you will have to hand-patch the file locations before compiling 237# this file. 238# 239# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL 240# 241# As the ANSI/ECMA-48 standard and variants take firmer hold, and as 242# character-cell terminals are increasingly replaced by X displays, much of 243# this file is becoming a historical document (this is part of the reason for 244# the new organization, which puts ANSI types, xterm, Unix consoles, 245# and vt100 up front in confidence that this will catch 95% of new hardware). 246# 247# For the terminal types still alive, I'd like to have manufacturer's 248# contact data (Internet address and/or snail-mail + phone). 249# 250# I'm also interested in enriching the comments so that the latter portions of 251# the file do in fact become a potted history of VDT technology as seen by 252# UNIX hackers. Ideally, I'd like the headers for each manufacturer to 253# include its live/dead/out-of-the-business status, and for as many 254# terminal types as possible to be tagged with information like years 255# of heaviest use, popularity, and interesting features. 256# 257# I'm especially interested in identifying the obscure entries listed under 258# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal 259# wisdom about them gets lost. If you know a lot about obscure old terminals, 260# please go to the terminfo resource page, grab the UFO file (ufo.ti), and 261# eyeball it for things you can identify and describe. 262# 263# If you have been around long enough to contribute, please read the file 264# with this in mind and send me your annotations. 265# 266# COPYRIGHTS AND OTHER DELUSIONS 267# 268# The BSD ancestor of this file had a standard Regents of the University of 269# California copyright with dates from 1980 to 1993. 270# 271# Some information has been merged in from a terminfo file SCO distributes. 272# It has an obnoxious boilerplate copyright which I'm ignoring because they 273# took so much of the content from the ancestral BSD versions of this file 274# and didn't attribute it, thereby violating the BSD Regents' copyright. 275# 276# Not that anyone should care. However many valid functions copyrights may 277# serve, putting one on a termcap/terminfo file with hundreds of anonymous 278# contributors makes about as much sense as copyrighting a wall-full of 279# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous. 280# 281# This file deliberately has no copyright. It belongs to no one and everyone. 282# If you claim you own it, you will merely succeed in looking like a fool. 283# Use it as you like. Use it at your own risk. Copy and redistribute freely. 284# There are no guarantees anywhere. Svaha! 285# 286 287######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES 288# 289# This section describes terminal classes and brands that are still 290# quite common. 291# 292 293#### Specials 294# 295# Special "terminals". These are used to label tty lines when you don't 296# know what kind of terminal is on it. The characteristics of an unknown 297# terminal are the lowest common denominator - they look about like a ti 700. 298# 299 300dumb|80-column dumb tty, 301 am, 302 cols#80, 303 bel=^G, cr=^M, cud1=^J, ind=^J, 304unknown|unknown terminal type, 305 gn, use=dumb, 306lpr|printer|line printer, 307 OTbs, hc, os, 308 cols#132, lines#66, 309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J, 310glasstty|classic glass tty interpreting ASCII control characters, 311 OTbs, am, 312 cols#80, 313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H, 314 kcud1=^J, nel=^M^J, .kbs=^H, 315 316vanilla|dumb tty, 317 OTbs, 318 bel=^G, cr=^M, cud1=^J, ind=^J, 319 320#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities 321# 322# See the end-of-file comment for more on these. 323# 324 325# ANSI capabilities are broken up into pieces, so that a terminal 326# implementing some ANSI subset can use many of them. 327ansi+local1, 328 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, 329ansi+local, 330 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 331 cuu=\E[%p1%dA, use=ansi+local1, 332ansi+tabs, 333 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[2g, 334ansi+inittabs, 335 it#8, use=ansi+tabs, 336ansi+erase, 337 clear=\E[H\E[J, ed=\E[J, el=\E[K, 338ansi+rca, 339 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd, 340ansi+cup, 341 cup=\E[%i%p1%d;%p2%dH, home=\E[H, 342ansi+rep, 343 rep=%p1%c\E[%p2%{1}%-%db, 344ansi+idl1, 345 dl1=\E[M, il1=\E[L, 346ansi+idl, 347 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1, 348ansi+idc, 349 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6, 350ansi+arrows, 351 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 352 khome=\E[H, 353ansi+sgr|ansi graphic renditions, 354 blink=\E[5m, invis=\E[8m, rev=\E[7m, 355 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, 356 sgr0=\E[0m, 357ansi+sgrso|ansi standout only, 358 rmso=\E[m, smso=\E[7m, 359ansi+sgrul|ansi underline only, 360 rmul=\E[m, smul=\E[4m, 361ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim, 362 bold=\E[1m, 363 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, 364 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, 365ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold, 366 dim=\E[2m, 367 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m, 368 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, 369ansi+pp|ansi printer port, 370 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 371ansi+csr|ansi scroll-region plus cursor save & restore, 372 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7, 373 374# The IBM PC alternate character set. Plug this into any Intel console entry. 375# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the 376# ROM graphics for control characters such as the diamond, up- and down-arrow. 377# This works with the System V, Linux, and BSDI consoles. It's a safe bet this 378# will work with any Intel console, they all seem to have inherited \E[11m 379# from the ANSI.SYS de-facto standard. 380klone+acs|alternate character set for ansi.sys displays, 381 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 382 rmacs=\E[10m, smacs=\E[11m, 383 384# Highlight controls corresponding to the ANSI.SYS standard. Most 385# console drivers for Intel boxes obey these. Makes the same assumption 386# about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>, 387# <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS. 388klone+sgr|attribute control for ansi.sys displays, 389 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m, 390 rmso=\E[m, rmul=\E[m, 391 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m, 392 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m, 393 use=klone+acs, 394 395# Most Intel boxes do not treat "invis" (invisible) text. 396klone+sgr8|attribute control for ansi.sys displays, 397 invis=\E[8m, 398 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 399 use=klone+sgr, 400 401# Highlight controls corresponding to the ANSI.SYS standard. *All* 402# console drivers for Intel boxes obey these. Does not assume \E[11m will 403# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS 404# diamond and arrow characters under curses. 405klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m), 406 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m, 407 rmul=\E[m, 408 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 409 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, 410 use=klone+acs, 411 412# KOI8-R (RFC1489) acs (alternate character set) 413# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996. 414klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset, 415 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225, 416 rmacs=\E[10m, smacs=\E[11m, 417 418# ANSI.SYS color control. The setab/setaf caps depend on the coincidence 419# between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer 420# but equivalent strings that don't rely on that coincidence: 421# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 422# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 423# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard. 424# They match a subset of ECMA-48. 425klone+color|color control for ansi.sys and ISO6429-compatible displays, 426 colors#8, ncv#3, pairs#64, 427 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 428 429# This is better than klone+color, it doesn't assume white-on-black as the 430# default color pair, but many `ANSI' terminals don't grok the <op> cap. 431ecma+color|color control for ECMA-48-compatible terminals, 432 AX, 433 colors#8, ncv#3, pairs#64, 434 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 435 436# Attribute control for ECMA-48-compatible terminals 437ecma+sgr|attribute capabilities for true ECMA-48 terminals, 438 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8, 439 440# For comparison, here are all the capabilities implied by the Intel 441# Binary Compatibility Standard (level 2) that fit within terminfo. 442# For more detail on this rather pathetic standard, see the comments 443# near the end of this file. 444ibcs2|Intel Binary Compatibility Standard prescriptions, 445 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB, 446 cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 447 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX, 448 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 449 indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7, 450 smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd, 451 452#### ANSI/ECMA-48 terminals and terminal emulators 453# 454# See near the end of this file for details on ANSI conformance. 455# Don't mess with these entries! Lots of other entries depend on them! 456# 457# This section lists entries in a least-capable to most-capable order. 458# if you're in doubt about what `ANSI' matches yours, try them in that 459# order and back off from the first that breaks. 460 461# ansi-mr is for ANSI terminals with ONLY relative cursor addressing 462# and more than one page of memory. It uses local motions instead of 463# direct cursor addressing, and makes almost no assumptions. It does 464# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen. 465ansi-mr|mem rel cup ansi, 466 am, xon, 467 cols#80, lines#24, use=vanilla, use=ansi+erase, 468 use=ansi+local1, 469 470# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but 471# beware of screen size problems and memory relative cursor addressing. 472ansi-mini|any ansi terminal with pessimistic assumptions, 473 am, xon, 474 cols#80, lines#24, use=vanilla, use=ansi+cup, 475 use=ansi+erase, 476 477# ansi-mtabs adds relative addressing and minimal tab support 478ansi-mtabs|any ansi terminal with pessimistic assumptions, 479 it#8, 480 ht=^I, use=ansi+local1, use=ansi-mini, 481 482# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL 483# 484# The following is an entry for the full ANSI 3.64 (1977). It lacks 485# padding, but most terminals using the standard are "fast" enough 486# not to require any -- even at 9600 bps. If you encounter problems, 487# try including the padding specifications. 488# 489# Note: the :as: and :ae: specifications are not implemented here, for 490# the available termcap documentation does not make clear WHICH alternate 491# character set to specify. ANSI 3.64 seems to make allowances for several. 492# Please make the appropriate adjustments to fit your needs -- that is 493# if you will be using alternate character sets. 494# 495# There are very few terminals running the full ANSI 3.64 standard, 496# so I could only test this entry on one verified terminal (Visual 102). 497# I would appreciate the results on other terminals sent to me. 498# 499# Please report comments, changes, and problems to: 500# 501# U.S. MAIL: Hugh Hansard 502# Box: 22830 503# Emory University 504# Atlanta, GA. 30322. 505# 506# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh. 507# 508# (Added vt100 <rc>,<sc> to quiet a tic warning --esr) 509ansi77|ansi 3.64 standard 1977 version, 510 OTbs, am, mir, 511 cols#80, it#8, lines#24, 512 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 513 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 514 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K, 515 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H, 516 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 517 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, 518 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h, 519 smso=\E[7m, smul=\E[4m, 520 521# Procomm and some other ANSI emulations don't recognize all of the ANSI- 522# standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and 523# <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>, 524# <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to 525# 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem 526# to confuse many emulators. On the other hand, we can count on these programs 527# doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured 528# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under 529# ANSI.SYS influence. 530# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995 531pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode), 532 OTbs, am, mir, msgr, 533 cols#80, it#8, lines#24, 534 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D, 535 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 536 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 537 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 538 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[2g, 539 use=klone+sgr-dumb, 540pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode), 541 lines#25, use=pcansi-m, 542pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode), 543 lines#33, use=pcansi-m, 544pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode), 545 lines#43, use=pcansi-m, 546# The color versions. All PC emulators do color... 547pcansi|ibm-pc terminal programs claiming to be ansi, 548 use=klone+color, use=pcansi-m, 549pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines, 550 lines#25, use=pcansi, 551pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines, 552 lines#33, use=pcansi, 553pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines, 554 lines#43, use=pcansi, 555 556# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color. 557# If you want pound signs rather than dollars, replace `B' with `A' 558# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities. 559# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995 560ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes, 561 mc5i, 562 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 563 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM, 564 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I, 565 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H, 566 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 567 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S, 568 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B, 569 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[2g, 570 vpa=\E[%i%p1%dd, use=pcansi-m, 571 572ansi+enq|ncurses extension for ANSI ENQ, 573 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c, 574 u9=\E[c, 575 576# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in 577# standard terminfo. Assumes ANSI.SYS-compatible attributes and color. 578# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995 579ansi|ansi/pc-term compatible with color, 580 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m, 581 582# ansi-generic is a vanilla ANSI terminal. This is assumed to implement 583# all the normal ANSI stuff with no extensions. It assumes 584# insert/delete line/char is there, so it won't work with 585# vt100 clones. It assumes video attributes for bold, blink, 586# underline, and reverse, which won't matter much if the terminal 587# can't do some of those. Padding is assumed to be zero, which 588# shouldn't hurt since xon/xoff is assumed. 589ansi-generic|generic ansi standard terminal, 590 am, xon, 591 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup, 592 use=ansi+rca, use=ansi+erase, use=ansi+tabs, 593 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep, 594 use=ansi+sgrbold, use=ansi+arrows, 595 596#### DOS ANSI.SYS variants 597# 598# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS 599# documentation (except for the keyboard key reassignment feature, which 600# doesn't fit the <pfkey> model well). The klone+acs sequences were valid 601# though undocumented. The <pfkey> capability is untested but should work for 602# keys F1-F10 (%p1 values outside this range will yield unpredictable results). 603# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995 604ansi.sys-old|ANSI.SYS under PC-DOS 2.1, 605 OTbs, am, mir, msgr, xon, 606 cols#80, lines#25, 607 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, 608 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H, 609 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 610 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s", rc=\E[u, 611 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR, 612 u7=\E[6n, use=klone+color, use=klone+sgr8, 613ansi.sys|ANSI.SYS 3.1 and later versions, 614 el=\E[K, use=ansi.sys-old, 615 616# 617# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS. 618# This should only be used when the terminal emulator cannot redefine the keys. 619# Since redefining keys with ansi.sys also affects PC-DOS programs, the key 620# definitions must be restored. If the terminal emulator is quit while in vi 621# or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS. 622# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix 623# (^U and ^D are already defined for tn3270). The ESC is safe for vi but it 624# does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab. 625# Note that <kcub1> is always BS, because PC-dos can tolerate this change. 626# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi. 627# Consequently the End keypad key could not be set (it is relatively safe and 628# actually useful because it sends ^@ O, which beeps and opens a line above). 629ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi, 630 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, 631 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p, 632 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p, 633 use=ansi.sys, 634# 635# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer. 636nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS, 637 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, 638 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n, 639 use=ansi.sys, 640# 641# See ansi.sysk and nansi.sys above. 642nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi, 643 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, 644 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, 645 use=ansi.sysk, 646 647#### ANSI console types 648# 649 650#### BeOS 651# 652# BeOS entry for Terminal program Seems to be almost ANSI 653beterm|BeOS Terminal, 654 am, eo, mir, msgr, xenl, xon, 655 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64, 656 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, 657 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 658 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 659 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 660 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 661 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, 662 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 663 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, 664 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 665 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~, 666 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, 667 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~, 668 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, 669 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, 670 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7, 671 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 672 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm, 673 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m, 674 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n, 675 vpa=\E[%i%p1%dd, 676 677#### Linux consoles 678# 679 680# This entry is good for the 1.2.13 or later version of the Linux console. 681# 682# *************************************************************************** 683# * * 684# * WARNING: * 685# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in * 686# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab * 687# * character. Here are the keymap replacement lines that will set this up: * 688# * * 689# keycode 15 = Tab Tab 690# alt keycode 15 = Meta_Tab 691# shift keycode 15 = F26 692# string F26 ="\033[Z" 693# * * 694# * This has to use a key slot which is unfortunate (any unused one will * 695# * do, F26 is the higher-numbered one). The change ought to be built * 696# * into the kernel tables. * 697# * * 698# *************************************************************************** 699# 700# All linux kernels since 1.2.13 (at least) set the screen size 701# themselves; this entry assumes that capability. 702# 703linux-basic|linux console, 704 am, bce, eo, mir, msgr, xenl, xon, 705 it#8, ncv#18, 706 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 707 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 708 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 709 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 710 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 711 el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H, 712 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 713 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177, 714 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 715 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, 716 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 717 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 718 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, 719 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 720 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 721 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, 722 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7, 723 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 724 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g, 725 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr, 726 use=ecma+color, 727 728linux-m|Linux console no color, 729 colors@, pairs@, 730 setab@, setaf@, setb@, setf@, use=linux, 731 732# The 1.3.x kernels add color-change capabilities; if yours doesn't have this 733# and it matters, turn off <ccc>. The %02x escape used to implement this is 734# not supposedly back-portable to older SV curses (although it has worked fine 735# on Solaris for several years) and not supported in ncurses versions before 736# 1.9.9. 737linux-c-nc|linux console with color-change, 738 ccc, 739 initc=\E]P%p1%x%p2%{256}%*%{1000}%/%02x%p3%{256}%*%{1000}%/%02x%p4%{256}%*%{1000}%/%02x, 740 oc=\E]R, use=linux-basic, 741# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996 742linux-c|linux console 1.3.6+ for older ncurses, 743 ccc, 744 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;, 745 oc=\E]R, use=linux-basic, 746 747# The 2.2.x kernels add a private mode that sets the cursor type; use that to 748# get a block cursor for cvvis. 749# reported by Frank Heckenbach <frank@g-n-u.de>. 750linux|linux console, 751 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c, 752 cvvis=\E[?25h\E[?8c, use=linux-c-nc, 753 754# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file 755linux-nic|linux with ich/ich1 suppressed for non-curses programs, 756 ich@, ich1@, use=linux, 757 758# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts. 759# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997. 760linux-koi8|linux with koi8 alternate character set, 761 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224, 762 use=linux, use=klone+koi8acs, 763 764# Another entry for KOI8-r with Qing Long's acsc. 765# (which one better complies with the standard?) 766linux-koi8r|linux with koi8-r alternate character set, 767 use=linux, use=klone+koi8acs, 768 769# Entry for the latin1 and latin2 fonts 770linux-lat|linux with latin1 or latin2 alternate character set, 771 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376, 772 use=linux, 773 774# This uses graphics from VT codeset instead of from cp437. 775# reason: cp437 (aka "straight to font") is not functional under luit. 776# from: Andrey V Lukyanov <land@long.yar.ru>. 777linux-vt|linux console using VT codes for graphics, 778 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, 779 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0, 780 smpch@, use=linux, 781 782# This is based on the Linux console (relies on the console to perform some 783# of the functionality), but does not recognize as many control sequences. 784# The program comes bundled with an old (circa 1998) copy of the Linux 785# console terminfo. It recognizes some non-ANSI/VT100 sequences such as 786# \E* move cursor to home, as as \E[H 787# \E,X same as \E(X 788# \EE move cursor to beginning of row 789# \E[y,xf same as \E[y,xH 790# 791# Note: The status-line support is buggy (dsl does not work). 792kon|kon2|jfbterm|Kanji ON Linux console, 793 ccc@, hs, 794 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@, 795 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T, 796 use=linux, 797 798#### Mach 799# 800 801# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk> 802mach|Mach Console, 803 am, km, 804 cols#80, it#8, lines#25, 805 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M, 806 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 807 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 808 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 809 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, 810 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 811 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ, 812 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 813 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U, 814 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m, 815 smso=\E[7m, smul=\E[4m, 816mach-bold|Mach Console with bold instead of underline, 817 rmul=\E[0m, smul=\E[1m, use=mach, 818mach-color|Mach Console with ANSI color, 819 colors#8, pairs#64, 820 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m, 821 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach, 822 823# From: Marcus Brinkmann 824# http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/ 825# 826# Comments in the original are summarized here: 827# 828# hurd uses 8-bit characters (km). 829# 830# Although it doesn't do XON/XOFF, we don't want padding characters (xon). 831# 832# Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't 833# have the eat_newline_glitch. It doesn't support setting or removing tab 834# stops (hts/tbc). 835# 836# hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is 837# one byte instead three. 838# 839# <ich1> is not included because hurd has insert mode. 840# 841# hurd doesn't use ^J for scrolling, because this could put things into the 842# scrollback buffer. 843# 844# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode. 845# This is a GNU extension. 846# 847# The original has commented-out ncv, but is restored here. 848# 849# Reading the source, RIS resets cnorm, but not xmous. 850hurd|The GNU Hurd console server, 851 am, bce, bw, eo, km, mir, msgr, xon, 852 colors#8, it#8, ncv#18, pairs#64, 853 acsc=++\,\,--..00ii``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 854 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 855 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 856 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 857 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 858 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP, 859 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 860 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg, 861 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, 862 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, 863 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD, 864 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, 865 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 866 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 867 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 868 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~, 869 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 870 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 871 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T, 872 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l, 873 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7, 874 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 875 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 876 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h, 877 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, 878 gsbom=\E[>1h, 879 880#### OSF Unix 881# 882 883# OSF/1 1.1 Snapshot 2 884pmcons|pmconsole|PMAX console, 885 am, 886 cols#128, lines#57, 887 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I, 888 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 889 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 890 891# SCO console and SOS-Syscons console for 386bsd 892# (scoansi: had unknown capabilities 893# :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\ 894# :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C: 895# :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\ 896# :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\ 897# :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\ 898# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based 899# on the <smacs>=\E[12m -- esr) 900# 901# klone+sgr-dumb is an error since the acsc does not match -TD 902# 903# In this description based on SCO's keyboard(HW) manpage list of default 904# function key values: 905# F13-F24 are shifted F1-F12 906# F25-F36 are control F1-F12 907# F37-F48 are shift+control F1-F12 908# 909# hpa/vpa work in the console, but not in scoterm: 910# hpa=\E[%p1%dG, 911# vpa=\E[%p1%dd, 912# 913# SCO's terminfo uses 914# kLFT=\E[d, 915# kRIT=\E[c, 916# which do not work (console or scoterm). 917# 918# Console documents only 3 attributes can be set with SGR (so we don't use sgr). 919scoansi-old|SCO Extended ANSI standard crt (5.0.5), 920 OTbs, am, bce, eo, xon, 921 colors#8, cols#80, it#8, lines#25, pairs#64, 922 acsc=-\230.\231\,.+/0[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207, 923 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 924 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C, 925 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 926 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 927 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP, 928 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M, 929 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I, 930 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 931 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H, 932 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 933 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, 934 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, 935 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, 936 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, 937 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, 938 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, 939 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, 940 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], 941 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, 942 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, 943 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, 944 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, 945 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7, 946 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, 947 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, 948scoansi-new|SCO Extended ANSI standard crt (5.0.6), 949 km, 950 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr, 951 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m, 952 rep=\E[%p1%d;%p2%db, rmm=\E[=11L, 953 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 954 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm, 955 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m, 956 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m, 957 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L, 958 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr, 959 use=scoansi-old, 960# make this easy to change... 961scoansi|SCO Extended ANSI standard crt, 962 use=scoansi-old, 963 964# This actually describes the generic SVr4 display driver for Intel boxes. 965# The <dim=\E[2m> isn't documented and therefore may not be reliable. 966# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995 967att6386|at386|386at|AT&T WGS 6386 console, 968 am, bw, eo, xon, 969 cols#80, it#8, lines#25, 970 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, 971 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C, 972 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD, 973 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 974 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 975 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 976 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 977 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 978 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, 979 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H, 980 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 981 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, 982 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, 983 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@, 984 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m, 985 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, 986 sc=\E7, 987 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m, 988 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, 989 tbc=\E[2g, vpa=\E[%i%p1%dd, use=klone+color, 990# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr) 991pc6300plus|AT&T 6300 plus, 992 OTbs, am, xon, 993 cols#80, lines#24, 994 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C, 995 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B, 996 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, 997 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K, 998 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J, 999 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 1000 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe, 1001 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk, 1002 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 1003 smso=\E[7m, smul=\E[4m, tbc=\E[3g, 1004 1005# From: Benjamin C. W. Sittler <bsittler@nmt.edu> 1006# 1007# I have a UNIX PC which I use as a terminal attached to my Linux PC. 1008# Unfortunately, the UNIX PC terminfo entry that comes with ncurses 1009# is broken. All the special key sequences are broken, making it unusable 1010# with Emacs. The problem stems from the following: 1011# 1012# The UNIX PC has a plethora of keys (103 of them, and there's no numeric 1013# keypad!), loadable fonts, and strange highlighting modes ("dithered" 1014# half-intensity, "smeared" bold, and real strike-out, for example.) It also 1015# uses resizable terminal windows, but the bundled terminal program always 1016# uses an 80x24 window (and doesn't support seem to support a 132-column 1017# mode.) 1018# 1019# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a 1020# library which was a superset of SVr3.5 curses (called tam, for "terminal 1021# access method".) tam includes support for real, overlapping windows, 1022# onscreen function key labels, and bitmap graphics. But since the primary 1023# user interface on the UNIX PC was a GUI program (ua, for "user 1024# assistant",) and remote administration was considered important for the 1025# machine, tam also supported VT100-compatible terminals attached to the 1026# serial port or used across the StarLan network. To simulate the extra keys 1027# not present on a VT100, users could press ESC and a two-letter sequence, 1028# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences, 1029# however, were not the same as those sent by the actual Undo key. The 1030# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example. 1031# (If you're interested in adding some of the tam calls to ncurses, btw, I 1032# have the full documentation and several programs which use tam. It also 1033# used an extended terminfo format to describe key sequences, special 1034# highlighting modes, etc.) 1035# 1036# KEYS: This means that ncurses would quite painful on the UNIX PC, since 1037# there are two sequences for every key-modifier combination (local keyboard 1038# sequence and remote "VT100" sequence.) But I doubt many people are trying 1039# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the 1040# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume) 1041# seem to have been built from the manual describing the VT100 sequences. 1042# This means it doesn't work for a real live UNIX PC. 1043# 1044# FONTS: The UNIX PC also has a strange interpretation of "alternate 1045# character set". Rather than the VT100 graphics you might expect, it allows 1046# up to 8 custom fonts to be loaded at any given time. This means that 1047# programs expecting VT100 graphics will usually be disappointed. For this 1048# reason I have disabled the smacs/rmacs sequences, but they could easily be 1049# re-enabled. Here are the relevant control sequences (from the ESCAPE(7) 1050# manpage), should you wish to do so: 1051# 1052# SGR10 - Select font 0 - ESC [ 10 m or SO 1053# SGR11 - Select font 1 - ESC [ 11 m or SI 1054# SGR12 - Select font 2 - ESC [ 12 m 1055# ... (etc.) 1056# SGR17 - Select font 7 - ESC [ 17 m 1057# 1058# Graphics for line drawing are not reliably found at *any* character 1059# location because the UNIX PC has dynamically reloadable fonts. I use font 1060# 0 for regular text and font 1 for italics, but this is by no means 1061# universal. So ASCII line drawing is in order if smacs/rmacs are enabled. 1062# 1063# MISC: The cursor visible/cursor invisible sequences were swapped in the 1064# distributed terminfo. 1065# 1066# To ameliorate these problems (and fix a few highlighting bugs) I rewrote 1067# the UNIX PC terminfo entry. The modified version works great with Lynx, 1068# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC 1069# attached by serial cable. In Emacs, even the Undo key works, and many 1070# applications can now use the F1-F8 keys. 1071# 1072# esr's notes: 1073# Terminfo entry for the AT&T Unix PC 7300 1074# from escape(7) in Unix PC 7300 Manual. 1075# Somewhat similar to a vt100-am (but different enough 1076# to redo this from scratch.) 1077# 1078# /*************************************************************** 1079# * 1080# * FONT LOADING PROGRAM FOR THE UNIX PC 1081# * 1082# * This routine loads a font defined in the file ALTFONT 1083# * into font memory slot #1. Once the font has been loaded, 1084# * it can be used as an alternative character set. 1085# * 1086# * The call to ioctl with the argument WIOCLFONT is the key 1087# * to this routine. For more information, see window(7) in 1088# * the PC 7300 documentation. 1089# ***************************************************************/ 1090# #include <string.h> /* needed for strcpy call */ 1091# #include <sys/window.h> /* needed for ioctl call */ 1092# #define FNSIZE 60 /* font name size */ 1093# #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */ 1094# /* 1095# * The file /usr/lib/wfont/special.8.ft comes with the 1096# * standard PC software. It defines a graphics character set 1097# * similar to that of the Teletype 5425 terminal. To view 1098# * this or other fonts in /usr/lib/wfont, use the command 1099# * cfont <filename>. For further information on fonts see 1100# * cfont(1) in the PC 7300 documentation. 1101# */ 1102# 1103# struct altfdata /* structure for alt font data */ 1104# { 1105# short altf_slot; /* memory slot number */ 1106# char altf_name[FNSIZE]; /* font name (file name) */ 1107# }; 1108# ldfont() 1109# { 1110# int wd; /* window in which altfont will be */ 1111# struct altfdata altf; 1112# altf.altf_slot=1; 1113# strcpy(altf.altf_name,ALTFONT); 1114# for (wd =1; wd < 12; wd++) { 1115# ioctl(wd, WIOCLFONT,&altf); 1116# } 1117# } 1118# 1119# (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry, 1120# they're confirmed by the man page for the System V display---esr) 1121# 1122att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300, 1123 am, xon, 1124 cols#80, it#8, lines#24, 1125 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C, 1126 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, 1127 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 1128 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 1129 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 1130 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL, 1131 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB, 1132 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, 1133 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM, 1134 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR, 1135 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO, 1136 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z, 1137 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 1138 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf, 1139 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd, 1140 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 1141 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B, 1142 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv, 1143 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, 1144 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB, 1145 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM, 1146 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m, 1147 smul=\E[4m, 1148 1149# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is 1150# from SGI's terminfo database. SGI's entry shows F9-F12 with the codes 1151# for the application keypad mode. We have added iris-ansi-ap rather than 1152# change the original to keypad mode. 1153# 1154# (iris-ansi: added rmam/smam based on init string -- esr) 1155# 1156# This entry, and those derived from it, is used in xwsh (also known as 1157# winterm). Some capabilities that do not fit into the terminfo model 1158# include the shift- and control-functionkeys: 1159# 1160# F1-F12 generate different codes when shift or control modifiers are used. 1161# For example: 1162# F1 \E[001q 1163# shift F1 \E[013q 1164# control-F1 \E[025q 1165# 1166# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e., 1167# \EOP to \EOS. The shifted and control modifiers still do the same thing. 1168# 1169# The cursor keys also have different codes: 1170# control-up \E[162q 1171# control-down \E[165q 1172# control-left \E[159q 1173# control-right \E[168q 1174# 1175# shift-up \E[161q 1176# shift-down \E[164q 1177# shift-left \E[158q 1178# shift-right \E[167q 1179# 1180# control-tab \[072q 1181# 1182iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100), 1183 am, 1184 cols#80, it#8, lines#40, 1185 bel=^G, bold=\E[1m, clear=\E[H\E[2J, 1186 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD, 1187 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, 1188 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 1189 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h, 1190 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 1191 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED, 1192 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P, 1193 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q, 1194 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 1195 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, 1196 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q, 1197 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, 1198 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, 1199 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, 1200 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, 1201 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, 1202 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, 1203 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m, 1204 tbc=\E[3g, 1205iris-ansi-ap|IRIS ANSI in application-keypad mode, 1206 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q, 1207 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi, 1208 1209# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX 1210# (T.Dickey 98/1/24) 1211iris-color|xwsh|IRIX ANSI with color, 1212 ncv#33, 1213 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m, 1214 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m, 1215 rmul=\E[24m, rs1=\Ec, 1216 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 1217 sitm=\E[3m, use=vt100+enq, use=klone+color, 1218 use=iris-ansi-ap, 1219 1220# The following is a version of the ibm-pc entry distributed with PC/IX, 1221# (Interactive Systems' System 3 for the Big Blue), modified by Richard 1222# McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original, 1223# (the former is untrue, and the latter failed under UCB/man); standout and 1224# underline modes have been added. Note: this entry describes the "native" 1225# capabilities of the PC monochrome display, without ANY emulation; most 1226# communications packages (but NOT PC/IX connect) do some kind of emulation. 1227pcix|PC/IX console, 1228 am, bw, eo, 1229 cols#80, lines#24, 1230 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, 1231 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, 1232 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, 1233 smul=\E[4m, 1234 1235# (ibmpcx: this entry used to be known as ibmx. 1236# It formerly included the following extension capabilities: 1237# :GC=b:GL=v:GR=t:RT=^J:\ 1238# :GH=\E[196g:GV=\E[179g:\ 1239# :GU=\E[193g:GD=\E[194g:\ 1240# :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\ 1241# :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\ 1242# :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\ 1243# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate 1244# ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match 1245# what was there before. -- esr) 1246ibmpcx|xenix|ibmx|IBM PC xenix console display, 1247 OTbs, am, msgr, 1248 cols#80, lines#25, 1249 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C, 1250 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 1251 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H, 1252 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d, 1253 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e, 1254 kpp=\E[Z, use=klone+acs, use=klone+sgr8, 1255 1256#### QNX 1257# 1258 1259# QNX 4.0 Console 1260# Michael's original version of this entry had <am@>, <smcup=\Ei>, 1261# <rmcup=\Eh\ER>; this was so terminfo applications could write the lower 1262# right corner without triggering a scroll. The ncurses terminfo library can 1263# handle this case with the <ich1> capability, and prefers <am> for better 1264# optimization. Bug: The <op> capability resets attributes. 1265# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996 1266# (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>) 1267qnx|qnx4|qnx console, 1268 daisy, km, mir, msgr, xhpa, xt, 1269 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8, 1270 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263, 1271 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ, 1272 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 1273 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2, 1274 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee, 1275 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263, 1276 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364, 1277 kDL=\377\366, kEND=\377\301, kEOL=\377\311, 1278 kEXT=\377\367, kFND=\377\370, kHLP=\377\371, 1279 kHOM=\377\260, kIC=\377\340, kLFT=\377\264, 1280 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272, 1281 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262, 1282 kRDO=\377\315, kRES=\377\374, kRIT=\377\266, 1283 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303, 1284 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0, 1285 kclo=\377\343, kclr=\377\341, kcmd=\377\245, 1286 kcpy=\377\265, kcrt=\377\305, kctab=\377\237, 1287 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246, 1288 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274, 1289 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320, 1290 kext=\377\270, kf1=\377\201, kf10=\377\212, 1291 kf11=\377\256, kf12=\377\257, kf13=\377\213, 1292 kf14=\377\214, kf15=\377\215, kf16=\377\216, 1293 kf17=\377\217, kf18=\377\220, kf19=\377\221, 1294 kf2=\377\202, kf20=\377\222, kf21=\377\223, 1295 kf22=\377\224, kf23=\377\333, kf24=\377\334, 1296 kf25=\377\225, kf26=\377\226, kf27=\377\227, 1297 kf28=\377\230, kf29=\377\231, kf3=\377\203, 1298 kf30=\377\232, kf31=\377\233, kf32=\377\234, 1299 kf33=\377\235, kf34=\377\236, kf35=\377\276, 1300 kf36=\377\277, kf37=\377\321, kf38=\377\322, 1301 kf39=\377\323, kf4=\377\204, kf40=\377\324, 1302 kf41=\377\325, kf42=\377\326, kf43=\377\327, 1303 kf44=\377\330, kf45=\377\331, kf46=\377\332, 1304 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206, 1305 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346, 1306 khlp=\377\350, khome=\377\240, khts=\377\342, 1307 kich1=\377\253, kil1=\377\273, kind=\377\261, 1308 kmov=\377\351, kmrk=\377\355, kmsg=\377\345, 1309 knp=\377\252, knxt=\377\312, kopn=\377\357, 1310 kopt=\377\353, kpp=\377\242, kprt=\377\255, 1311 kprv=\377\302, krdo=\377\336, kref=\377\354, 1312 kres=\377\360, krfr=\377\347, kri=\377\271, 1313 krmir=\377\313, krpl=\377\362, krst=\377\352, 1314 ksav=\377\361, kslt=\377\247, kspd=\377\335, 1315 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER, 1316 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER, 1317 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d, 1318 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei, 1319 smso=\E(, smul=\E[, 1320# 1321# 1322qnxt|qnxt4|QNX4 terminal, 1323 crxm, use=qnx4, 1324# 1325qnxm|QNX4 with mouse events, 1326 maddr#1, 1327 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h, 1328 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l, 1329 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l, 1330 smicm=\E/>2h, use=qnx4, 1331# 1332qnxw|QNX4 windows, 1333 xvpa, use=qnxm, 1334# 1335# Monochrome QNX4 terminal or console. Setting this terminal type will 1336# allow an application running on a color console to behave as if it 1337# were a monochrome terminal. Output will be through stdout instead of 1338# console writes because the term routines will recognize that the 1339# terminal name starts with 'qnxt'. 1340# 1341qnxtmono|Monochrome QNX4 terminal or console, 1342 colors@, pairs@, 1343 scp@, use=qnx4, 1344 1345# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998 1346# (esr: commented out <scp> and <rmcup> to avoid warnings.) 1347# (TD: derive from original qnx4 entry) 1348qnxt2|qnx 2.15 serial terminal, 1349 am, 1350 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@, 1351 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4, 1352 1353# QNX ANSI terminal definition 1354qansi-g|QNX ANSI, 1355 am, eslok, hs, xon, 1356 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80, 1357 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~Oa, 1358 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 1359 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M, 1360 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 1361 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1362 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A, 1363 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 1364 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J, 1365 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l, 1366 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 1367 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, 1368 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m, 1369 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0, 1370 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt, 1371 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h, 1372 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c, 1373 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa, 1374 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B, 1375 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y, 1376 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, 1377 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt, 1378 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx, 1379 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~, 1380 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~, 1381 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~, 1382 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~, 1383 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~, 1384 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~, 1385 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU, 1386 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh, 1387 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a, 1388 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo, 1389 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg, 1390 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T, 1391 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m, 1392 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T, 1393 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m, 1394 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l, 1395 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 1396 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 1397 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 1398 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;, 1399 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m, 1400 smul=\E[4m, tbc=\E[2g, 1401 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, 1402# 1403qansi|QNX ansi with console writes, 1404 daisy, xhpa, use=qansi-g, 1405# 1406qansi-t|QNX ansi without console writes, 1407 crxm, use=qansi, 1408# 1409qansi-m|QNX ansi with mouse, 1410 maddr#1, 1411 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h, 1412 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l, 1413 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l, 1414 smicm=\E[>2h, use=qansi, 1415# 1416qansi-w|QNX ansi for windows, 1417 xvpa, use=qansi-m, 1418 1419#### NetBSD consoles 1420# 1421# pcvt termcap database entries (corresponding to release 3.31) 1422# Author's last edit-date: [Fri Sep 15 20:29:10 1995] 1423# 1424# (For the terminfo master file, I translated these into terminfo syntax. 1425# Then I dropped all the pseudo-HP entries. we don't want and can't use 1426# the :Xs: flag. Then I split :is: into a size-independent <is1> and a 1427# size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr) 1428 1429# NOTE: <ich1> has been taken out of this entry. for reference, it should 1430# be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below. 1431# (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583) 1432pcvtXX|pcvt vt200 emulator (DEC VT220), 1433 am, km, mir, msgr, xenl, 1434 it#8, vt#3, 1435 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, 1436 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 1437 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 1438 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 1439 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1440 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 1441 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 1442 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 1443 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, 1444 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177, 1445 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 1446 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, 1447 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 1448 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~, 1449 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, 1450 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, 1451 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 1452 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 1453 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 1454 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 1455 1456# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) 1457# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and 1458# 50 lines entries; 80 columns 1459pcvt25|dec vt220 emulation with 25 lines, 1460 cols#80, lines#25, 1461 is2=\E[1;25r\E[25;1H, use=pcvtXX, 1462pcvt28|dec vt220 emulation with 28 lines, 1463 cols#80, lines#28, 1464 is2=\E[1;28r\E[28;1H, use=pcvtXX, 1465pcvt35|dec vt220 emulation with 35 lines, 1466 cols#80, lines#35, 1467 is2=\E[1;35r\E[35;1H, use=pcvtXX, 1468pcvt40|dec vt220 emulation with 40 lines, 1469 cols#80, lines#40, 1470 is2=\E[1;40r\E[40;1H, use=pcvtXX, 1471pcvt43|dec vt220 emulation with 43 lines, 1472 cols#80, lines#43, 1473 is2=\E[1;43r\E[43;1H, use=pcvtXX, 1474pcvt50|dec vt220 emulation with 50 lines, 1475 cols#80, lines#50, 1476 is2=\E[1;50r\E[50;1H, use=pcvtXX, 1477 1478# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) 1479# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and 1480# 50 lines entries; 132 columns 1481pcvt25w|dec vt220 emulation with 25 lines and 132 cols, 1482 cols#132, lines#25, 1483 is2=\E[1;25r\E[25;1H, use=pcvtXX, 1484pcvt28w|dec vt220 emulation with 28 lines and 132 cols, 1485 cols#132, lines#28, 1486 is2=\E[1;28r\E[28;1H, use=pcvtXX, 1487pcvt35w|dec vt220 emulation with 35 lines and 132 cols, 1488 cols#132, lines#35, 1489 is2=\E[1;35r\E[35;1H, use=pcvtXX, 1490pcvt40w|dec vt220 emulation with 40 lines and 132 cols, 1491 cols#132, lines#40, 1492 is2=\E[1;40r\E[40;1H, use=pcvtXX, 1493pcvt43w|dec vt220 emulation with 43 lines and 132 cols, 1494 cols#132, lines#43, 1495 is2=\E[1;43r\E[43;1H, use=pcvtXX, 1496pcvt50w|dec vt220 emulation with 50 lines and 132 cols, 1497 cols#132, lines#50, 1498 is2=\E[1;50r\E[50;1H, use=pcvtXX, 1499 1500# OpenBSD implements a color variation 1501pcvt25-color|dec vt220 emulation with 25 lines and color, 1502 cols#80, lines#25, 1503 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~, 1504 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 1505 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 1506 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~, 1507 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX, 1508 use=ecma+color, 1509 1510# Terminfo entries to enable the use of the ncurses library in colour on a 1511# NetBSD-arm32 console (only tested on a RiscPC). 1512# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98 1513# modified codes for setf/setb to setaf/setab, then to klone+color, corrected 1514# typo in invis - TD 1515arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480), 1516 am, bce, msgr, xenl, xon, 1517 cols#80, it#8, lines#30, 1518 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 1519 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 1520 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 1521 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 1522 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 1523 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 1524 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 1525 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, 1526 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H, 1527 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 1528 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x, 1529 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v, 1530 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, 1531 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, 1532 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 1533 sc=\E7, 1534 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>, 1535 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 1536 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr, 1537 use=klone+color, 1538 1539arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768), 1540 cols#132, lines#50, use=arm100, 1541 1542# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine 1543# manufactured by Sharp for the Japenese market. 1544# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996 1545x68k|x68k-ite|NetBSD/x68k ITE, 1546 cols#96, lines#32, 1547 kclr=\E[9~, khlp=\E[28~, use=vt220, 1548 1549# <tv@pobox.com>: 1550# Entry for the DNARD OpenFirmware console, close to ANSI but not quite. 1551# 1552# (still unfinished, but good enough so far.) 1553ofcons|DNARD OpenFirmware console, 1554 bw, 1555 cols#80, lines#30, 1556 bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M, 1557 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B, 1558 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, 1559 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, 1560 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K, 1561 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL, 1562 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D, 1563 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P, 1564 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W, 1565 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r, 1566 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m, 1567 rmso=\2330m, rmul=\2330m, 1568 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 1569 sgr0=\2330m, 1570 1571# NetBSD "wscons" emulator in vt220 mode. 1572# This entry is based on the NetBSD termcap entry, correcting the ncv value. 1573# The emulator renders underlined text in red. Colors are otherwise usable. 1574# 1575# Testing the emulator and reading the source code (NetBSD 2.0), it appears 1576# that "vt220" is inaccurate. There are a few vt220-features, but most of the 1577# vt220 screens in vttest do not work with this emulator. For instance, it 1578# identifies itself (primary DA response) as a vt220 with selective erase. But 1579# the selective erase feature does not work. The secondary response is copied 1580# from Kermit's emulation of vt220, does not correspond to actual vt220. At 1581# the level of detail in a termcap, it is a passable emulator, since ECH does 1582# work. Don't use it on a VMS system -TD 1583wsvt25|NetBSD wscons in 25 line DEC VT220 mode, 1584 bce, msgr, 1585 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64, 1586 is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~, 1587 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, 1588 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 1589 kf9=\E[20~, khome=\E[7~, op=\E[m, setab=\E[4%p1%dm, 1590 setaf=\E[3%p1%dm, use=vt220, 1591 1592wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta, 1593 km, use=wsvt25, 1594 1595# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and 1596# DECstation/pmax. 1597rcons|BSD rasterconsole, 1598 use=sun-il, 1599# Color version of above. Color currently only provided by NetBSD. 1600rcons-color|BSD rasterconsole with ANSI color, 1601 bce, 1602 colors#8, pairs#64, 1603 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons, 1604 1605# mgterm -- MGL/MGL2, MobileGear Graphic Library 1606# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k} 1607# -- the setf/setb are probably incorrect, more likely setaf/setab -TD 1608# -- compare with cons25w 1609mgterm, 1610 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc, 1611 colors#8, cols#80, it#8, lines#18, pairs#64, 1612 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 1613 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 1614 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1615 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 1616 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM, 1617 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 1618 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, 1619 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 1620 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 1621 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, 1622 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N, 1623 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, 1624 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, 1625 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, 1626 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm, 1627 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, 1628 1629#### FreeBSD console entries 1630# 1631# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996 1632# Andrey Chernov maintains the FreeBSD termcap distributions. 1633# 1634# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade 1635# or comment out the :cb: capability in the console entry. 1636# 1637# Alexander Lukyanov reports: 1638# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there. 1639# Now el1 clears not only to the line beginning, but also a large chunk 1640# of previous line. But there is another bug - ech does not work at all. 1641# 1642 1643# for syscons 1644# common entry without semigraphics 1645# Bug: The <op> capability resets attributes. 1646# Bug? The ech and el1 attributes appear to move the cursor in some cases; for 1647# instance el1 does if the cursor is moved to the right margin first. Removed 1648# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K) 1649# 1650# Setting colors turns off reverse; we cannot guarantee order, so use ncv. 1651# Note that this disables standout with color. 1652# 1653# The emulator sends difference strings based on shift- and control-keys, 1654# like scoansi: 1655# F13-F24 are shifted F1-F12 1656# F25-F36 are control F1-F12 1657# F37-F48 are shift+control F1-F12 1658cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode), 1659 am, bce, bw, eo, msgr, npc, 1660 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64, 1661 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 1662 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, 1663 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1664 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 1665 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, 1666 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 1667 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, 1668 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 1669 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 1670 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, 1671 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y, 1672 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d, 1673 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h, 1674 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m, 1675 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q, 1676 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v, 1677 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z, 1678 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^, 1679 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R, 1680 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L, 1681 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, 1682 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, 1683 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1684 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m, 1685 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, 1686cons25|ansis|ansi80x25|freebsd console (25-line ansi mode), 1687 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371, 1688 use=cons25w, 1689cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode), 1690 colors@, pairs@, 1691 bold@, dim@, op@, rmul=\E[m, setab@, setaf@, 1692 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m, 1693 smul=\E[4m, use=cons25, 1694cons30|ansi80x30|freebsd console (30-line ansi mode), 1695 lines#30, use=cons25, 1696cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode), 1697 lines#30, use=cons25-m, 1698cons43|ansi80x43|freebsd console (43-line ansi mode), 1699 lines#43, use=cons25, 1700cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode), 1701 lines#43, use=cons25-m, 1702cons50|ansil|ansi80x50|freebsd console (50-line ansi mode), 1703 lines#50, use=cons25, 1704cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode), 1705 lines#50, use=cons25-m, 1706cons60|ansi80x60|freebsd console (60-line ansi mode), 1707 lines#60, use=cons25, 1708cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode), 1709 lines#60, use=cons25-m, 1710cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic, 1711 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225, 1712 use=cons25w, 1713cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono), 1714 colors@, pairs@, 1715 op@, rmul=\E[m, setab@, setaf@, 1716 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m, 1717 smul=\E[4m, use=cons25r, 1718cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines), 1719 lines#50, use=cons25r, 1720cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono), 1721 lines#50, use=cons25r-m, 1722cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines), 1723 lines#60, use=cons25r, 1724cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono), 1725 lines#60, use=cons25r-m, 1726# ISO 8859-1 FreeBSD console 1727cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars, 1728 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237, 1729 use=cons25w, 1730cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono), 1731 colors@, pairs@, 1732 bold@, dim@, op@, rmul=\E[m, setab@, setaf@, 1733 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m, 1734 smul=\E[4m, use=cons25l1, 1735cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines), 1736 lines#50, use=cons25l1, 1737cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono), 1738 lines#50, use=cons25l1-m, 1739cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines), 1740 lines#60, use=cons25l1, 1741cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono), 1742 lines#60, use=cons25l1-m, 1743 1744#### 386BSD and BSD/OS Consoles 1745# 1746 1747# This was the original 386BSD console entry (I think). 1748# Some places it's named oldpc3|oldibmpc3. 1749# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu> 1750origpc3|origibmpc3|IBM PC 386BSD Console, 1751 OTbs, am, bw, eo, xon, 1752 cols#80, lines#25, 1753 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 1754 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, 1755 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, 1756 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 1757 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x, 1758 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x, 1759 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x, 1760 1761# description of BSD/386 console emulator in version 1.0 (supplied by BSDI) 1762oldpc3|oldibmpc3|old IBM PC BSD/386 Console, 1763 OTbs, km, 1764 lines#25, 1765 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M, 1766 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 1767 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F, 1768 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R, 1769 1770# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1 1771# Note, the emulator supports many of the additional console features 1772# listed in the iBCS2 (e.g. character-set selection) though not all 1773# are described here. This entry really ought to be upgraded. 1774# Also note, the console will also work with fewer lines after doing 1775# "stty rows NN", e.g. to use 24 lines. 1776# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996) 1777# Bug: The <op> capability resets attributes. 1778bsdos-pc|IBM PC BSD/OS Console, 1779 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 1780 use=bsdos-pc-nobold, 1781 1782bsdos-pc-nobold|BSD/OS PC console w/o bold, 1783 use=klone+color, use=bsdos-pc-m, 1784 1785bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono, 1786 OTbs, am, eo, km, xon, 1787 cols#80, it#8, lines#25, 1788 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H, 1789 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 1790 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 1791 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 1792 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, 1793 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, 1794 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7, 1795 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;, 1796 use=klone+sgr8, 1797 1798# Old names for BSD/OS PC console used in releases before 4.1. 1799pc3|BSD/OS on the PC Console, 1800 use=bsdos-pc-nobold, 1801ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline, 1802 use=bsdos-pc, 1803 1804# BSD/OS on the SPARC 1805bsdos-sparc|Sun SPARC BSD/OS Console, 1806 use=sun, 1807 1808# BSD/OS on the PowerPC 1809bsdos-ppc|PowerPC BSD/OS Console, 1810 use=bsdos-pc, 1811 1812#### DEC VT52 1813# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr) 1814# 1815# Actually (TD pointed this out at the time the acsc string was added): 1816# vt52 shouldn't define full acsc since most of the cells don't match. 1817# see vt100 manual page A-31. This is the list that does match: 1818# f degree 1819# g plus/minus 1820# h right-arrow 1821# k down-arrow 1822# m scan-1 1823# o scan-3 1824# q scan-5 1825# s scan-7 1826# The line-drawing happens to work in several terminal emulators, but should 1827# not be used as a guide to the capabilities of the vt52. Note in particular 1828# that vt52 does not support line-drawing characters (the scan-X values refer 1829# to a crude plotting feature) -TD 1830vt52|dec vt52, 1831 OTbs, 1832 cols#80, it#8, lines#24, 1833 acsc=ffgghhompoqqss.k, bel=^G, clear=\EH\EJ, cr=^M, 1834 cub1=\ED, cud1=\EB, cuf1=\EC, 1835 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 1836 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 1837 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, 1838 1839#### DEC VT100 and compatibles 1840# 1841# DEC terminals from the vt100 forward are collected here. Older DEC terminals 1842# and micro consoles can be found in the `obsolete' section. More details on 1843# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be 1844# found near the end of this file. 1845# 1846# Except where noted, these entries are DEC's official terminfos. 1847# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support 1848# Engineering for more information. Updated terminfos and termcaps 1849# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. 1850# 1851# In October 1995 DEC sold its terminals business, including the VT and Dorio 1852# line and trademark, to SunRiver Data Systems. SunRiver has since changed 1853# its name to Boundless Technologies; see http://www.boundless.com. 1854# 1855 1856# NOTE: Any VT100 emulation, whether in hardware or software, almost 1857# certainly includes what DEC called the `Level 1 editing extension' codes; 1858# only the very oldest VT100s lacked these and there probably aren't any of 1859# those left alive. To capture these, use one of the VT102 entries. 1860# 1861# Note that the <xenl> glitch in vt100 is not quite the same as on the Concept, 1862# since the cursor is left in a different position while in the 1863# weird state (concept at beginning of next line, vt100 at end 1864# of this line) so all versions of vi before 3.7 don't handle 1865# <xenl> right on vt100. The correct way to handle <xenl> is when 1866# you output the char in column 80, immediately output CR LF 1867# and then assume you are in column 1 of the next line. If <xenl> 1868# is on, am should be on too. 1869# 1870# I assume you have smooth scroll off or are at a slow enough baud 1871# rate that it doesn't matter (1200? or less). Also this assumes 1872# that you set auto-nl to "on", if you set it off use vt100-nam 1873# below. 1874# 1875# The padding requirements listed here are guesses. It is strongly 1876# recommended that xon/xoff be enabled, as this is assumed here. 1877# 1878# The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the 1879# tab settings are in non-volatile memory and don't need to be 1880# reset upon login. Also setting the number of columns glitches 1881# the screen annoyingly. You can type "reset" to get them set. 1882# 1883# The VT100 series terminals have cursor ("arrows") keys which can operate 1884# in two different modes: Cursor Mode and Application Mode. Cursor Mode 1885# is the reset state, and is assumed to be the normal state. Application 1886# Mode is the "set" state. In Cursor Mode, the cursor keys transmit 1887# "Esc [ {code}" sequences, conforming to ANSI standards. In Application 1888# Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode 1889# was provided primarily as an aid to the porting of VT52 applications. It is 1890# assumed that the cursor keys are normally in Cursor Mode, and expected that 1891# applications such as vi will always transmit the <smkx> string. Therefore, 1892# the definitions for the cursor keys are made to match what the terminal 1893# transmits after the <smkx> string is transmitted. If the <smkx> string 1894# is a null string or is not defined, then cursor keys are assumed to be in 1895# "Cursor Mode", and the cursor keys definitions should match that assumption, 1896# else the application may fail. It is also expected that applications will 1897# always transmit the <rmkx> string to the terminal before they exit. 1898# 1899# The VT100 series terminals have an auxiliary keypad, commonly referred to as 1900# the "Numeric Keypad", because it is a cluster of numeric and function keys. 1901# The Numeric Keypad which can operate in two different modes: Numeric Mode and 1902# Application Mode. Numeric Mode is the reset state, and is assumed to be 1903# the normal state. Application Mode is the "set" state. In Numeric Mode, 1904# the numeric and punctuation keys transmit ASCII 7-bit characters, and the 1905# Enter key transmits the same as the Return key (Note: the Return key 1906# can be configured to send either LF (\015) or CR LF). In Application Mode, 1907# all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys 1908# always send the same "Esc O {code}" sequences. It is assumed that the keypad 1909# is normally in Numeric Mode. If an application requires that the keypad be 1910# in Application Mode then it is expected that the user, or the application, 1911# will set the TERM environment variable to point to a terminfo entry which has 1912# defined the <smkx> string to include the codes that switch the keypad into 1913# Application Mode, and the terminfo entry will also define function key 1914# fields to match the Application Mode control codes. If the <smkx> string 1915# is a null string or is not defined, then the keypad is assumed to be in 1916# Numeric Mode. If the <smkx> string switches the keypad into Application 1917# Mode, it is expected that the <rmkx> string will contain the control codes 1918# necessary to reset the keypad to "Normal" mode, and it is also expected that 1919# applications which transmit the <smkx> string will also always transmit the 1920# <rmkx> string to the terminal before they exit. 1921# 1922# Here's a diagram of the VT100 keypad keys with their bindings. 1923# The top line is the name of the key (some DEC keyboards have the keys 1924# labelled somewhat differently, like GOLD instead of PF1, but this is 1925# the most "official" name). The second line is the escape sequence it 1926# generates in Application Keypad mode (where "$" means the ESC 1927# character). The third line contains two items, first the mapping of 1928# the key in terminfo, and then in termcap. 1929# _______________________________________ 1930# | PF1 | PF2 | PF3 | PF4 | 1931# | $OP | $OQ | $OR | $OS | 1932# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_| 1933# | 7 8 9 - | 1934# | $Ow | $Ox | $Oy | $Om | 1935# |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________| 1936# | 4 | 5 | 6 | , | 1937# | $Ot | $Ou | $Ov | $Ol | 1938# |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_| 1939# | 1 | 2 | 3 | | 1940# | $Oq | $Or | $Os | enter | 1941# |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM | 1942# | 0 | . | | 1943# | $Op | $On | | 1944# |___kc1_______K4____|_kc3__K5_|_kent_@8_| 1945# 1946# Note however, that the arrangement of the 5-key ka1-kc3 do not follow the 1947# terminfo guidelines. That is a compromise used to assign the remaining 1948# keys on the keypad to kf5-kf0, used on older systems with legacy termcap 1949# support: 1950vt100+keypad|dec vt100 numeric keypad no fkeys, 1951 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn, 1952vt100+pfkeys|dec vt100 numeric keypad, 1953 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 1954 use=vt100+keypad, 1955vt100+fnkeys|dec vt100 numeric keypad, 1956 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, 1957 kf9=\EOw, use=vt100+pfkeys, 1958# 1959# A better adaptation to modern keyboards such as the PC's, which have a dozen 1960# function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to 1961# use the 5-key arrangement to model the arrow keys as suggested in the 1962# terminfo guidelines: 1963# _______________________________________ 1964# | PF1 | PF2 | PF3 | PF4 | 1965# | $OP | $OQ | $OR | $OS | 1966# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_| 1967# | 7 8 9 - | 1968# | $Ow | $Ox | $Oy | $Om | 1969# |_ka1__K1_|_________|_ka3__K3_|_________| 1970# | 4 | 5 | 6 | , | 1971# | $Ot | $Ou | $Ov | $Ol | 1972# |_________|_kb2__K2_|_________|_________| 1973# | 1 | 2 | 3 | | 1974# | $Oq | $Or | $Os | enter | 1975# |_kc1__K4_|_________|_kc3__K5_| $OM | 1976# | 0 | . | | 1977# | $Op | $On | | 1978# |___________________|_________|_kent_@8_| 1979# 1980vt220+keypad|dec vt220 numeric keypad, 1981 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM, 1982 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt, 1983 kb3=\EOv, kc2=\EOr, 1984# 1985vt100+enq|ncurses extension for vt100-style ENQ, 1986 u8=\E[?1;2c, use=ansi+enq, 1987vt102+enq|ncurses extension for vt102-style ENQ, 1988 u8=\E[?6c, use=ansi+enq, 1989# 1990# And here, for those of you with orphaned VT100s lacking documentation, is 1991# a description of the soft switches invoked when you do `Set Up'. 1992# 1993# Scroll 0-Jump Shifted 3 0-# 1994# | 1-Smooth | 1-British pound sign 1995# | Autorepeat 0-Off | Wrap Around 0-Off 1996# | | 1-On | | 1-On 1997# | | Screen 0-Dark Bkg | | New Line 0-Off 1998# | | | 1-Light Bkg | | | 1-On 1999# | | | Cursor 0-Underline | | | Interlace 0-Off 2000# | | | | 1-Block | | | | 1-On 2001# | | | | | | | | 2002# 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings 2003# | | | | | | | | 2004# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz 2005# | | | 1-On | | | 1-50 Hz 2006# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits 2007# | | 1-ANSI | | 1-8 Bits 2008# | Keyclick 0-Off | Parity 0-Off 2009# | 1-On | 1-On 2010# Margin Bell 0-Off Parity Sense 0-Odd 2011# 1-On 1-Even 2012# 2013# The following SET-UP modes are assumed for normal operation: 2014# ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS 2015# WRAP_AROUND_ON JUMP_SCROLL_OFF 2016# Other SET-UP modes may be set for operator convenience or communication 2017# requirements; I recommend 2018# AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_# 2019# Unless you have a graphics add-on such as Digital Engineering's VT640 2020# (and even then, whenever it can be arranged!) you should set 2021# INTERLACE_OFF 2022# 2023# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr) 2024vt100|vt100-am|dec vt100 (w/advanced video), 2025 OTbs, am, mc5i, msgr, xenl, xon, 2026 cols#80, it#8, lines#24, vt#3, 2027 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2028 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2029 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2030 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 2031 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 2032 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 2033 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 2034 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, 2035 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, 2036 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 2037 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 2038 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, 2039 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 2040 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, 2041 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 2042 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 2043 use=vt100+fnkeys, 2044vt100nam|vt100-nam|vt100 no automargins, 2045 am@, xenl@, use=vt100-am, 2046vt100-vb|dec vt100 (w/advanced video) & no beep, 2047 bel@, flash=\E[?5h\E[?5l, use=vt100, 2048 2049# Ordinary vt100 in 132 column ("wide") mode. 2050vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video), 2051 cols#132, lines#24, 2052 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am, 2053vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin), 2054 cols#132, lines#14, vt@, 2055 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam, 2056 2057# vt100 with no advanced video. 2058vt100-nav|vt100 without advanced video option, 2059 xmc#1, 2060 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m, 2061 smul@, use=vt100, 2062vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option), 2063 cols#132, lines#14, use=vt100-nav, 2064 2065# vt100 with one of the 24 lines used as a status line. 2066# We put the status line on the top. 2067vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline, 2068 eslok, hs, 2069 lines#23, 2070 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr, 2071 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8, 2072 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8, 2073 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am, 2074 2075# Status line at bottom. 2076# Clearing the screen will clobber status line. 2077vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline, 2078 eslok, hs, 2079 lines#23, 2080 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H, 2081 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am, 2082 2083# Most of the `vt100' emulators out there actually emulate a vt102 2084# This entry (or vt102-nsgr) is probably the right thing to use for 2085# these. 2086vt102|dec vt102, 2087 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h, 2088 use=vt100, 2089vt102-w|dec vt102 in wide mode, 2090 cols#132, 2091 rs3=\E[?3h, use=vt102, 2092 2093# Many brain-dead PC comm programs that pretend to be `vt100-compatible' 2094# fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0> 2095# string in the canonical vt100 entry above leaves the screen littered 2096# with little snowflake or star characters (IBM PC ROM character \017 = ^O) 2097# after highlight turnoffs. This entry should fix that, and even leave 2098# ACS support working, at the cost of making multiple-highlight changes 2099# slightly more expensive. 2100# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995 2101vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes), 2102 sgr@, sgr0=\E[m, use=vt102, 2103 2104# VT125 Graphics CRT. Clear screen also erases graphics 2105# Some vt125's came configured with vt102 support. 2106vt125|vt125 graphics terminal, 2107 mir, 2108 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100, 2109 2110# This isn't a DEC entry, it came from University of Wisconsin. 2111# (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr) 2112vt131|dec vt131, 2113 OTbs, am, xenl, 2114 cols#80, it#8, lines#24, vt#3, 2115 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 2116 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2117 cub1=^H, cud1=^J, cuf1=\E[C$<2/>, 2118 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, 2119 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, 2120 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, 2121 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 2122 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>, 2123 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>, 2124 rmul=\E[m$<2/>, 2125 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 2126 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=, 2127 smso=\E[7m$<2/>, smul=\E[4m$<2/>, 2128 2129# vt132 - like vt100 but slower and has ins/del line and such. 2130# I'm told that <smir>/<rmir> are backwards in the terminal from the 2131# manual and from the ANSI standard, this describes the actual 2132# terminal. I've never actually used a vt132 myself, so this 2133# is untested. 2134# 2135vt132|DEC vt132, 2136 xenl, 2137 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, 2138 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100, 2139 2140# This vt220 description maps F5--F9 to the second block of function keys 2141# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict 2142# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping. 2143# PF1--PF4 are used as F1--F4. 2144# 2145vt220-old|vt200-old|DEC VT220 in vt100 emulation mode, 2146 OTbs, OTpt, am, mir, xenl, xon, 2147 cols#80, lines#24, vt#3, 2148 OTnl=^J, 2149 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2150 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l, 2151 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M, 2152 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 2153 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 2154 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 2155 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>, 2156 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B, 2157 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, 2158 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, 2159 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, 2160 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8, 2161 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100, 2162 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, 2163 rmso=\E[27m, rmul=\E[24m, 2164 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 2165 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2166 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2167 smso=\E[7m, smul=\E[4m, 2168 2169# A much better description of the VT200/220; used to be vt220-8 2170# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1 2171# designation to accommodate bug in pcvt -TD 2172vt220|vt200|dec vt220, 2173 OTbs, am, mc5i, mir, msgr, xenl, xon, 2174 cols#80, it#8, lines#24, vt#3, 2175 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2176 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 2177 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2178 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 2179 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2180 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 2181 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 2182 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH, 2183 ich=\E[%p1%d@, if=/usr/share/tabset/vt100, 2184 il=\E[%p1%dL, il1=\E[L, ind=\ED, 2185 is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D, 2186 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~, 2187 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 2188 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, 2189 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, 2190 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, 2191 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, 2192 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i, 2193 mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 2194 rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, 2195 rmul=\E[24m, rs1=\E[?3l, sc=\E7, 2196 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2197 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2198 smso=\E[7m, smul=\E[4m, tbc=\E[3g, 2199vt220-w|vt200-w|DEC vt220 in wide mode, 2200 cols#132, 2201 rs3=\E[?3h, use=vt220, 2202vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode, 2203 OTbs, am, mc5i, mir, msgr, xenl, xon, 2204 cols#80, it#8, lines#24, vt#3, 2205 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2206 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M, 2207 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, 2208 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C, 2209 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, 2210 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, 2211 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0, 2212 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH, 2213 ich=\233%p1%d@, if=/usr/share/tabset/vt100, 2214 il=\233%p1%dL, il1=\233L, ind=\ED, 2215 is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H, 2216 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, 2217 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, 2218 kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~, 2219 kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS, 2220 kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~, 2221 kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~, 2222 knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1, 2223 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, 2224 nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B, 2225 rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m, 2226 rs1=\233?3l, sc=\E7, 2227 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2228 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h, 2229 smso=\2337m, smul=\2334m, tbc=\2333g, 2230 2231# vt220d: 2232# This vt220 description regards F6--F10 as the second block of function keys 2233# at the top of the keyboard. This mapping follows the description given 2234# in the VT220 Programmer Reference Manual and agrees with the labeling 2235# on some terminals that emulate the vt220. There is no support for an F5. 2236# See vt220 for an alternate mapping. 2237# 2238vt220d|DEC VT220 in vt100 mode with DEC function key labeling, 2239 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 2240 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 2241 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~, 2242 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old, 2243 2244vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins, 2245 am@, 2246 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, 2247 2248# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko 2249# (not an official DEC entry!) 2250# The problem with real vt220 terminals is they don't send escapes when in 2251# in vt220 mode. This can be gotten around two ways. 1> don't send 2252# escapes or 2> put the vt220 into vt100 mode and use all the nifty 2253# features of vt100 advanced video which it then has. 2254# 2255# This entry takes the view of putting a vt220 into vt100 mode so 2256# you can use the escape key in emacs and everything else which needs it. 2257# 2258# You probably don't want to use this on a VMS machine since VMS will think 2259# it has a vt220 and will get fouled up coming out of emacs 2260# 2261# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996 2262# (Added vt100 <rc>,<sc> to quiet a tic warning -- esr) 2263vt200-js|vt220-js|dec vt200 series with jump scroll, 2264 am, 2265 cols#80, 2266 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2267 cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 2268 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 2269 il1=\E[L, ind=\ED, 2270 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m, 2271 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2272 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8, 2273 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l, 2274 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m, 2275 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=, 2276 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m, 2277 2278# This was DEC's vt320. Use the purpose-built one below instead 2279#vt320|DEC VT320 in vt100 emulation mode, 2280# use=vt220, 2281 2282# Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam. 2283# 2284vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode, 2285 am@, 2286 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, 2287 2288# These entries are not DEC's official ones, they were purpose-built for the 2289# VT320. Here are the designer's notes: 2290# <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to 2291# 'Erase to End of Field'... since nothing seems to use 'end' anyways... 2292# khome is Home on a PC kbd. Actually 'FIND' on a VT. 2293# Things that use <knxt> usually use tab anyways... and things that don't use 2294# tab usually use <knxt> instead... 2295# kprv is same as tab - Backtab is useless... 2296# I left out <sgr> because of its RIDICULOUS complexity, 2297# and the resulting fact that it causes the termcap translation of the entry 2298# to SMASH the 1k-barrier... 2299# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 2300# (vt320: uncommented <fsl> --esr) 2301vt320|vt300|dec vt320 7 bit terminal, 2302 am, eslok, hs, mir, msgr, xenl, 2303 cols#80, lines#24, wsl#80, 2304 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2305 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 2306 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 2307 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2308 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 2309 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2310 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 2311 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$}, 2312 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 2313 il1=\E[L, ind=\ED, 2314 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2315 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2316 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~, 2317 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 2318 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 2319 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 2320 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I, 2321 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i, 2322 mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m, 2323 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 2324 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 2325 rmul=\E[m, 2326 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2327 sc=\E7, 2328 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2329 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 2330 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 2331 tsl=\E[1$}\E[H\E[K, use=vt220+keypad, 2332vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy, 2333 am@, 2334 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 2335 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 2336 use=vt320, 2337# We have to init 132-col mode, not 80-col mode. 2338vt320-w|vt300-w|dec vt320 wide 7 bit terminal, 2339 cols#132, wsl#132, 2340 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2341 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2342 use=vt320, 2343vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am, 2344 am@, 2345 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 2346 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 2347 use=vt320-w, 2348 2349# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals 2350# which are pretty much a superset of the VT320. They have the 2351# host writable status line, yet another different DRCS matrix size, 2352# and such, but they add the DEC Technical character set, Multiple text 2353# pages, selectable length pages, and the like. The difference between 2354# the vt330 and vt340 is that the latter has only 2 planes and a monochrome 2355# monitor, the former has 4 planes and a color monitor. These terminals 2356# support VT131 and ANSI block mode, but as with much of these things, 2357# termcap/terminfo doesn't deal with these features. 2358# 2359# Note that this entry is are set up in what was the standard way for GNU 2360# Emacs v18 terminal modes to deal with the cursor keys in that the arrow 2361# keys were switched into application mode at the same time the numeric pad 2362# is switched into application mode. This changes the definitions of the 2363# arrow keys. Emacs v19 is smarter and mines its keys directly out of 2364# your termcap or terminfo entry, 2365# 2366# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 2367# (vt340: string capability "sb=\E[M" corrected to "sr"; 2368# also, added <rmam>/<smam> based on the init string -- esr) 2369vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page, 2370 am, eslok, hs, mir, msgr, xenl, xon, 2371 cols#80, it#8, lines#24, vt#3, 2372 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2373 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, 2374 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2375 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 2376 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 2377 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 2378 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, 2379 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, 2380 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 2381 il1=\E[L, ind=\ED, 2382 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2383 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2384 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 2385 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 2386 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, 2387 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 2388 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 2389 rmul=\E[24m, rs1=\E[?3l, sc=\E7, 2390 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2391 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 2392 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 2393 tsl=\E[2$~\E[1$}\E[1;%dH, 2394 2395# DEC doesn't supply a vt400 description, so we add Daniel Glasser's 2396# (originally written with vt420 as its primary name, and usable for it). 2397# 2398# VT400/420 -- This terminal is a superset of the vt320. It adds the multiple 2399# text pages and long text pages with selectable length of the vt340, along 2400# with left and right margins, rectangular area text copy, fill, and erase 2401# operations, selected region character attribute change operations, 2402# page memory and rectangle checksums, insert/delete column, reception 2403# macros, and other features too numerous to remember right now. TERMCAP 2404# can only take advantage of a few of these added features. 2405# 2406# Note that this entry is are set up in what was the standard way for GNU 2407# Emacs v18 terminal modes to deal with the cursor keys in that the arrow 2408# keys were switched into application mode at the same time the numeric pad 2409# is switched into application mode. This changes the definitions of the 2410# arrow keys. Emacs v19 is smarter and mines its keys directly out of 2411# your termcap entry, 2412# 2413# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 2414# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:"; 2415# also, added <rmam>/<smam> based on the init string -- esr) 2416vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap, 2417 am, eslok, hs, mir, msgr, xenl, xon, 2418 cols#80, it#8, lines#24, vt#3, 2419 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2420 blink=\E[5m, bold=\E[1m, civis=\E[?25l, 2421 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M, 2422 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2423 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 2424 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2425 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 2426 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>, 2427 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, 2428 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 2429 il=\E[%p1%dL, il1=\E[L, ind=\ED, 2430 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2431 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2432 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 2433 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 2434 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, 2435 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 2436 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 2437 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7, 2438 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2439 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 2440 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 2441 tsl=\E[2$~\E[1$}\E[1;%dH, 2442 2443# (vt420: I removed <kf0>, it collided with <kf10>. I also restored 2444# a missing <sc> -- esr) 2445vt420|DEC VT420, 2446 am, mir, xenl, xon, 2447 cols#80, lines#24, vt#3, 2448 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2449 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2450 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2451 cub1=^H, cud1=\E[B, cuf1=\E[C, 2452 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 2453 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 2454 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, 2455 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, 2456 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 2457 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, 2458 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, 2459 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 2460 kslt=\E[4~, rc=\E8, rev=\E[7m$<2>, 2461 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>, 2462 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, 2463 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 2464 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, 2465 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2466 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2467 smkx=\E=, smso=\E[7m, smul=\E[4m, 2468 2469# DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx) 2470# takes two parameters, the key and the string. Translating the key is 2471# straightforward (keys 1-5 are not defined on real terminals, though some 2472# emulators define these): 2473# 2474# if (key < 16) then value = key; 2475# else if (key < 21) then value = key + 1; 2476# else if (key < 25) then value = key + 2; 2477# else if (key < 27) then value = key + 3; 2478# else if (key < 30) then value = key + 4; 2479# else value = key + 5; 2480# 2481# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT". 2482# There's no provision in terminfo for emitting a string in this format, so the 2483# application has to know it. 2484# 2485vt420pc|DEC VT420 w/PC keyboard, 2486 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, 2487 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, 2488 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~, 2489 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, 2490 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, 2491 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~, 2492 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~, 2493 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~, 2494 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~, 2495 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~, 2496 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~, 2497 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~, 2498 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 2499 kf8=\E[19~, kf9=\E[20~, khome=\E[H, 2500 pctrm=USR_TERM\:vt420pcdos\:, 2501 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, 2502 use=vt420, 2503 2504vt420pcdos|DEC VT420 w/PC for DOS Merge, 2505 lines#25, 2506 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;, 2507 pctrm@, 2508 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@, 2509 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc, 2510 2511vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys, 2512 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 2513 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 2514 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 2515 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 2516 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 2517 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS, 2518 use=vt420, 2519 2520vt510|DEC VT510, 2521 use=vt420, 2522vt510pc|DEC VT510 w/PC keyboard, 2523 use=vt420pc, 2524vt510pcdos|DEC VT510 w/PC for DOS Merge, 2525 use=vt420pcdos, 2526 2527# VT520/VT525 2528# 2529# The VT520 is a monochrome text terminal capable of managing up to 2530# four independent sessions in the terminal. It has multiple ANSI 2531# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console) 2532# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950, 2533# 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only. 2534# 2535# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or 2536# [Alt]/[Print Screen] depending upon which keyboard and which 2537# terminal mode is being used. If Set-Up has been disabled or 2538# assigned to an unknown key, Set-Up may be entered by pressing 2539# [F3] as the first key after power up, regardless of keyboard type. 2540# (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr) 2541vt520|DEC VT520, 2542 am, mir, xenl, xon, 2543 cols#80, lines#24, vt#3, 2544 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2545 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2546 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2547 cub1=^H, cud1=\E[B, cuf1=\E[C, 2548 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 2549 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 2550 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, 2551 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, 2552 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 2553 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, 2554 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, 2555 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 2556 kslt=\E[4~, 2557 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, 2558 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, 2559 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, 2560 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 2561 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, 2562 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2563 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2564 smso=\E[7m, smul=\E[4m, 2565 2566# (vt525: I added <rmam>/<smam> based on the init string; 2567# removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr) 2568vt525|DEC VT525, 2569 am, mir, xenl, xon, 2570 cols#80, lines#24, vt#3, 2571 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2572 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2573 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2574 cub1=^H, cud1=\E[B, cuf1=\E[C, 2575 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 2576 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 2577 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, 2578 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, 2579 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 2580 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, 2581 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, 2582 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 2583 kslt=\E[4~, 2584 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, 2585 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, 2586 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, 2587 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 2588 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, 2589 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 2590 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2591 smso=\E[7m, smul=\E[4m, 2592 2593#### VT100 emulations 2594# 2595 2596# John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows 2597# (the best Windows telnet as of September 1995) presents the name `dec-vt100' 2598# to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us 2599# that this works best with a stock vt100 entry. 2600dec-vt100|EWAN telnet's vt100 emulation, 2601 use=vt100, 2602 2603# From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996 2604dec-vt220|DOS tnvt200 terminal emulator, 2605 am@, use=vt220, 2606 2607# Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to 2608# anyone who needs PC VT340 emulation. (or anything below that level, for 2609# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's 2610# RDBM systems, it includes ReGIS and SiXel support! I'm impressed... 2611# I can send the address if requested. 2612# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr) 2613# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 2614z340|zstem vt340 terminal emulator 132col 42line, 2615 lines#42, 2616 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, 2617 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, 2618 use=vt320-w, 2619z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins), 2620 am@, 2621 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, 2622 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, 2623 use=z340, 2624 2625# CRT is shareware. It implements some xterm features, including mouse. 2626crt|crt-vt220|CRT 2.3 emulating VT220, 2627 bce, msgr, 2628 ncv@, 2629 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color, 2630 2631# PuTTY 0.55 (released 3 August 2004) 2632# http://www.chiark.greenend.org.uk/~sgtatham/putty/ 2633# 2634# Comparing with 0.51, vttest is much better (only a few problems with the 2635# cursor position reports and wrapping). 2636# 2637# PuTTY 0.51 (released 14 December 2000) 2638# 2639# This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as 2640# well as SCO and Atari, color palettes from Linux console). Reading the code, 2641# it is intended to be VT102 plus selected features. By default, it sets $TERM 2642# to xterm, which is incorrect, since several features are misimplemented: 2643# 2644# Alt+key always sends ESC+key, so 'km' capability is removed. 2645# 2646# Control responses, wrapping and tabs are buggy, failing a couple of 2647# screens in vttest. 2648# 2649# xterm mouse support is not implemented (unrelease version may). 2650# 2651# Several features such as backspace/delete are optional; this entry documents 2652# the default behavior -TD 2653 2654putty|PuTTY terminal emulator, 2655 am, bce, bw, ccc, hs, mir, msgr, xenl, xon, 2656 colors#8, it#8, ncv#22, pairs#64, 2657 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2658 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 2659 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 2660 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2661 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, 2662 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 2663 dch=\E[%p1%dP, dch1=\E[P, 2664 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;, 2665 dl=\E[%p1%dM, dl1=\E[M, dsl=\E]0;\007, ech=\E[%p1%dX, 2666 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 2667 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG, 2668 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, 2669 indn=\E[%p1%dS, 2670 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x, 2671 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R, 2672 kb2=\E[G, kbs=\177, kcan=^C, kcbt=\E[Z, kcub1=\E[D, 2673 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 2674 kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 2675 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 2676 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 2677 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 2678 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 2679 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 2680 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m, 2681 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, 2682 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m, 2683 rmso=\E[27m, rmul=\E[24m, 2684 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l, 2685 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7, 2686 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 2687 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 2688 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h, 2689 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, 2690 tbc=\E[3g, tsl=\E]0;, vpa=\E[%i%p1%dd, use=vt102+enq, 2691vt100-putty|Reset PuTTY to pure vt100, 2692 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p, 2693 use=vt100, 2694putty-256color|PuTTY 0.58 with xterm 256-colors, 2695 use=xterm+256color, use=putty, 2696 2697# One of the keyboard selections is "VT100+". 2698# pterm (the X11 port) uses shifted F1-F10 as F11-F20 2699putty-vt100|VT100+ keyboard layout, 2700 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ, 2701 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 2702 kf9=\EOX, use=putty, 2703 2704# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by 2705# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator 2706# (communication program) which supports: 2707# 2708# - Serial port connections. 2709# - TCP/IP (telnet) connections. 2710# - VT100 emulation, and selected VT200/300 emulation. 2711# - TEK4010 emulation. 2712# - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and 2713# Quick-VAN). 2714# - Scripts using the "Tera Term Language". 2715# - Japanese and Russian character sets. 2716# 2717# The program does not come with terminfo or termcap entries. However, the 2718# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no 2719# vt52 or doublesize character support; blinking is done with color). Besides 2720# the HPA, VPA extensions it also implements CPL and CNL. 2721# 2722# All of the function keys can be remapped. This description shows the default 2723# mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys 2724# are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad 2725# is laid out like vt220, rather than the face codes on the PC keyboard, i.e, 2726# kfnd Insert 2727# kslt Delete 2728# kich1 Home 2729# kdch1 PageUp 2730# kpp End 2731# knp PageDown 2732# 2733# ANSI colors are implemented, but cannot be combined with video attributes 2734# except for reverse. 2735# 2736# No fonts are supplied with the program, so the acsc string is chosen to 2737# correspond with the default Microsoft terminal font. 2738# 2739# Tera Term recognizes some xterm sequences, including those for setting and 2740# retrieving the window title, and for setting the window size (i.e., using 2741# "resize -s"), though it does not pass SIGWINCH to the application if the 2742# user resizes the window with the mouse. 2743teraterm|Tera Term Pro, 2744 km, xon@, 2745 ncv#43, vt@, 2746 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 2747 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, 2748 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 2749 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 2750 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 2751 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG, 2752 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~, 2753 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 2754 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 2755 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, 2756 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 2757 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, 2758 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM, 2759 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m, 2760 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq, 2761 use=klone+color, use=vt100, 2762 2763# Tested with WinNT 4.0, the telnet application assumes the screensize is 2764# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters. 2765# 2766# Other notes: 2767# a) Fails tack's cup (cursor-addressing) test, though cup works well enough 2768# for casual (occasional) use. Also fails several of the vttest screens, 2769# but that is not unusual for vt100 "emulators". 2770# b) Does not implement vt100 keypad 2771# c) Recognizes a subset of vt52 controls. 2772ms-vt100|MS telnet imitating dec vt100, 2773 lines#25, 2774 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 2775 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@, 2776 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100, 2777 2778# Tested with Windows 2000, the telnet application runs in a console window, 2779# also using 'Terminal' font. 2780# 2781# Other notes: 2782# a) This version has no function keys or numeric keypad. Unlike the older 2783# version, the numeric keypad is entirely ignored. 2784# b) The program sets $TERM to "ansi", which of course is inaccurate. 2785ms-vt100-color|vtnt|windows 2000 ansi (sic), 2786 bce, 2787 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color, 2788 use=ms-vt100, 2789 2790# Based on comments from Federico Bianchi: 2791# 2792# vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different 2793# scheme for PF keys. 2794# 2795# and PuTTY wishlist: 2796# 2797# The modifiers are represented as the codes listed above, prefixed to 2798# the normal sequences. If the modifier is pressed alone, its sequence 2799# is transmitted twice in succession. If multiple modifiers apply, 2800# they're transmitted in the order shift, control, alt. 2801# 2802# Shift \E^S 2803# Alt \E^A, 2804# Ctrl \E^C, 2805ms-vt100+|vt100+|windows XP vt100+ (sic), 2806 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@, 2807 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3, 2808 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6, 2809 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9, 2810 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@, 2811 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3, 2812 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6, 2813 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9, 2814 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@, 2815 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4, 2816 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6, 2817 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9, 2818 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5, 2819 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+, 2820 knp=\E/, kpp=\E?, use=ms-vt100-color, 2821 2822ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+, 2823 use=ms-vt100+, 2824 2825# a minimal subset of a vt100 (compare with "news-unk). 2826tt|tkterm|Don Libes' tk text widget terminal emulator, 2827 clear=\E[H\E[J, cr=^M, cuf1=\E[C, cup=\E[%p1%d;%p2%dH, 2828 cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 2829 kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, rmso=\E[m, 2830 smso=\E[7m, 2831 2832#### X terminal emulators 2833# 2834# You can add the following line to your .Xdefaults to change the terminal type 2835# set by the xterms you start up to my-xterm: 2836# 2837# *termName: my-xterm 2838# 2839# System administrators can change the default entry for xterm instances 2840# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either 2841# case, xterm will detect and reject an invalid terminal type, falling back 2842# to the default of xterm. 2843# 2844 2845# X10/6.6 11/7/86, minus alternate screen, plus (csr) 2846# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string; 2847# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E) 2848# as these seem not to work -- esr) 2849x10term|vs100-x10|xterm terminal emulator (X10 window system), 2850 OTbs, am, km, mir, msgr, xenl, xon, 2851 cols#80, it#8, lines#65, 2852 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, 2853 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 2854 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 2855 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, 2856 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H, 2857 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 2858 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l, 2859 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 2860 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, 2861 smso=\E[7m, smul=\E[4m, 2862# Compatible with the R5 xterm 2863# (from the XFree86 3.2 distribution, <blink=@> removed) 2864# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD 2865# corrected typos in rs2 string - TD 2866# added u6-u9 -TD 2867xterm-r5|xterm R5 version, 2868 OTbs, am, km, msgr, xenl, 2869 cols#80, it#8, lines#24, 2870 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 2871 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2872 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 2873 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2874 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 2875 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 2876 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, 2877 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, 2878 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, 2879 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, 2880 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 2881 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 2882 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, 2883 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 2884 rmul=\E[m, 2885 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H, 2886 sc=\E7, 2887 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, 2888 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, 2889 smul=\E[4m, tbc=\E[3g, use=vt100+enq, 2890# Compatible with the R6 xterm 2891# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed) 2892# added khome/kend, hts based on the R6 xterm code - TD 2893# (khome/kend do not actually work in X11R5 or X11R6, but many people use this 2894# for compatibility with other emulators). 2895xterm-r6|xterm-old|xterm X11R6 version, 2896 OTbs, am, km, mir, msgr, xenl, 2897 cols#80, it#8, lines#24, 2898 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2899 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 2900 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2901 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 2902 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2903 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 2904 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, 2905 il1=\E[L, ind=^J, 2906 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H, 2907 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2908 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 2909 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 2910 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 2911 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 2912 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 2913 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 2914 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, 2915 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, 2916 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 2917 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7, 2918 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, 2919 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 2920 use=vt100+enq, 2921# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up. 2922# The name has been changed and some aliases have been removed. 2923xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System), 2924 OTbs, am, bce, km, mir, msgr, xenl, 2925 cols#80, it#8, lines#24, ncv@, 2926 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2927 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 2928 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 2929 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2930 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 2931 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2932 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 2933 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 2934 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 2935 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 2936 il1=\E[L, ind=^J, 2937 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, 2938 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 2939 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~, 2940 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 2941 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 2942 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, 2943 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 2944 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~, 2945 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El, 2946 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, 2947 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>, 2948 rmso=\E[27m, rmul=\E[24m, rs1=^O, 2949 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7, 2950 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 2951 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 2952 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 2953 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, 2954 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 2955 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq, 2956 use=ecma+color, use=vt220+keypad, 2957 2958# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100 2959# codes for F1-F4 except while in VT220 mode. 2960xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System), 2961 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32, 2962 2963# This version was released in XFree86 3.3.3 (November 1998). 2964# Besides providing printer support, it exploits a new feature that allows 2965# xterm to use terminfo-based descriptions with the titeInhibit resource. 2966# -- the distribution contained incorrect khome/kend values -TD 2967xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System), 2968 mc5i, 2969 blink=\E[5m, ich1@, invis=\E[8m, 2970 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@, 2971 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l, 2972 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, 2973 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 2974 smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33, 2975 2976# This version was released in XFree86 4.0. 2977xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System), 2978 npc, 2979 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~, 2980 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@, 2981 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF, 2982 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, 2983 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, 2984 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 2985 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, 2986 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~, 2987 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~, 2988 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P, 2989 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~, 2990 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, 2991 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, 2992 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l, 2993 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 2994 smcup=\E[?1049h, use=xterm-xf86-v333, 2995 2996# This version was released in XFree86 4.3. 2997xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System), 2998 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, 2999 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, 3000 kbeg@, 3001 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 3002 use=xterm-xf86-v40, 3003 3004# This version was released in XFree86 4.4. 3005xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System), 3006 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS, 3007 rin=\E[%p1%dT, use=xterm-xf86-v43, 3008 3009# This is the most common alias for xterm-new. 3010xterm-xfree86|xterm terminal emulator (XFree86), 3011 use=xterm-new, 3012# use=xterm-old, 3013 3014# This version reflects the current xterm features. 3015xterm-new|modern xterm terminal emulator, 3016 npc, 3017 indn=\E[%p1%dS, kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, 3018 kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, 3019 kRIT=\E[1;2C, kb2=\EOE, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, 3020 kcuf1=\EOC, kcuu1=\EOA, kend=\EOF, kent=\EOM, khome=\EOH, 3021 kich1=\E[2~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~, 3022 kpp=\E[5~, kri=\E[1;2A, rin=\E[%p1%dT, use=xterm+pcfkeys, 3023 use=xterm-basic, 3024# 3025# This fragment describes as much of XFree86 xterm's "pc-style" function 3026# keys as will fit into terminfo's 60 function keys. 3027# From ctlseqs.ms: 3028# Code Modifiers 3029# --------------------------------- 3030# 2 Shift 3031# 3 Alt 3032# 4 Shift + Alt 3033# 5 Control 3034# 6 Shift + Control 3035# 7 Alt + Control 3036# 8 Shift + Alt + Control 3037# --------------------------------- 3038# The meta key may also be used as a modifier in this scheme, adding another 3039# bit to the parameter. 3040xterm+pcfkeys|fragment for PC-style fkeys, 3041 use=xterm+pcf2, use=xterm+pcc2, 3042# 3043# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27) 3044# and revised in patch #167 (2002/8/24). Some other terminal emulators copied 3045# the earlier scheme, as noted in the "use=" clauses in this file. 3046# 3047# The original assignments from patch #94 for cursor-keys had some technical 3048# issues: 3049# 3050# A parameter for a function-key to represent a modifier is just more 3051# bits. But for a cursor-key it may change the behavior of the 3052# application. For instance, emacs decodes the first parameter of a 3053# cursor-key as a repeat count. 3054# 3055# A parameterized string should (really) not begin with SS3 (\EO). 3056# Rather, CSI (\E[) should be used. 3057# 3058# For these reasons, the original assignments were deprecated. For 3059# compatibility reasons, they are still available as a setting of xterm's 3060# modifyCursorKeys resource. These fragments list the modified cursor-keys 3061# that might apply to xterm+pcfkeys with different values of that resource. 3062xterm+pcc3|fragment with modifyCursorKeys:3, 3063 kDN=\E[>1;2B, kDN5=\E[>1;5B, kDN6=\E[>1;6B, 3064 kLFT5=\E[>1;5D, kLFT6=\E[>1;6D, kRIT5=\E[>1;5C, 3065 kRIT6=\E[>1;6C, kUP=\E[>1;2A, kUP5=\E[>1;5A, 3066 kUP6=\E[>1;6A, 3067 3068xterm+pcc2|fragment with modifyCursorKeys:2, 3069 kDN=\E[1;2B, kDN5=\E[1;5B, kDN6=\E[1;6B, kLFT5=\E[1;5D, 3070 kLFT6=\E[1;6D, kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP=\E[1;2A, 3071 kUP5=\E[1;5A, kUP6=\E[1;6A, 3072 3073xterm+pcc1|fragment with modifyCursorKeys:1, 3074 kDN=\E[2B, kDN5=\E[5B, kDN6=\E[6B, kLFT5=\E[5D, 3075 kLFT6=\E[6D, kRIT5=\E[5C, kRIT6=\E[6C, kUP=\E[2A, 3076 kUP5=\E[5A, kUP6=\E[6A, 3077 3078xterm+pcc0|fragment with modifyCursorKeys:0, 3079 kDN=\EO2B, kDN5=\EO5B, kDN6=\EO6B, kLFT5=\EO5D, 3080 kLFT6=\EO6D, kRIT5=\EO5C, kRIT6=\EO6C, kUP=\EO2A, 3081 kUP5=\EO5A, kUP6=\EO6A, 3082# 3083# Here are corresponding fragments from xterm patch #216: 3084# 3085xterm+pcf0|fragment with modifyFunctionKeys:0, 3086 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 3087 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, 3088 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, 3089 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 3090 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, 3091 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR, 3092 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, 3093 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, 3094 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R, 3095 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~, 3096 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, 3097 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P, 3098 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S, 3099 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~, 3100 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~, 3101 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P, 3102 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3103# 3104xterm+pcf2|fragment with modifyFunctionKeys:0, 3105 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 3106 kf13=\E[2P, kf14=\E[2Q, kf15=\E[2R, kf16=\E[2S, 3107 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, 3108 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 3109 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[5P, kf26=\E[5Q, 3110 kf27=\E[5R, kf28=\E[5S, kf29=\E[15;5~, kf3=\EOR, 3111 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, 3112 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, 3113 kf36=\E[24;5~, kf37=\E[6P, kf38=\E[6Q, kf39=\E[6R, 3114 kf4=\EOS, kf40=\E[6S, kf41=\E[15;6~, kf42=\E[17;6~, 3115 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, 3116 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\E[3P, 3117 kf5=\E[15~, kf50=\E[3Q, kf51=\E[3R, kf52=\E[3S, 3118 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~, 3119 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~, 3120 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\E[4P, 3121 kf62=\E[4Q, kf63=\E[4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3122# 3123# This chunk is used for building the VT220/Sun/PC keyboard variants. 3124xterm-basic|modern xterm terminal emulator - common, 3125 OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX, 3126 colors#8, cols#80, it#8, lines#24, pairs#64, 3127 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3128 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 3129 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M, 3130 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3131 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3132 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3133 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 3134 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 3135 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 3136 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 3137 ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H, 3138 kdch1=\E[3~, kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, 3139 meml=\El, memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, 3140 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l, 3141 rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, 3142 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, 3143 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 3144 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3145 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3146 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, 3147 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h, 3148 smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m, 3149 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq, 3150 3151# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997 3152# In retrospect, something like xterm-r6 was intended here -TD 3153xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1, 3154 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33, 3155 3156# This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey) 3157xterm-16color|xterm with 16 colors like aixterm, 3158 use=ibm+16color, use=xterm-new, 3159 3160xterm+256color|xterm 256-color feature, 3161 ccc, 3162 colors#256, pairs#32767, 3163 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, 3164 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m, 3165 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m, 3166 setb@, setf@, 3167 3168xterm+88color|xterm 88-color feature, 3169 colors#88, pairs#7744, use=xterm+256color, 3170 3171# These variants of XFree86 3.9.16 xterm are built as a configure option. 3172xterm-256color|xterm with 256 colors, 3173 use=xterm+256color, use=xterm-new, 3174xterm-88color|xterm with 88 colors, 3175 use=xterm+88color, use=xterm-256color, 3176 3177# These two are used to demonstrate the any-event mouse support, i.e., by 3178# using an extended name "XM" which tells ncurses to put the terminal into 3179# a special mode when initializing the xterm mouse. 3180xterm-1002|testing xterm-mouse, 3181 XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new, 3182xterm-1003|testing xterm-mouse, 3183 XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new, 3184 3185# This is another variant, for XFree86 4.0 xterm (T.Dickey) 3186# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color. 3187# To use it, your decTerminalID resource must be set to 200 or above. 3188# 3189# HTS \E H \210 3190# RI \E M \215 3191# SS3 \E O \217 3192# CSI \E [ \233 3193# 3194xterm-8bit|xterm terminal emulator 8-bit controls (X Window System), 3195 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX, 3196 colors#8, cols#80, it#8, lines#24, pairs#64, 3197 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3198 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z, 3199 civis=\233?25l, clear=\233H\2332J, 3200 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr, 3201 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J, 3202 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, 3203 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h, 3204 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, 3205 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, 3206 flash=\233?5h$<100/>\233?5l, home=\233H, 3207 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@, 3208 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m, 3209 is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, 3210 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H, 3211 kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B, 3212 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~, 3213 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~, 3214 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, 3215 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, 3216 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~, 3217 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~, 3218 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M, 3219 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i, 3220 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m, 3221 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l, 3222 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, 3223 rs1=\Ec, 3224 rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, 3225 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm, 3226 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3227 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3228 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, 3229 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, 3230 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=, 3231 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR, 3232 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd, 3233 3234xterm-hp|xterm with hpterm function keys, 3235 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 3236 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, 3237 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ, 3238 knp=\ES, kpp=\ET, use=xterm-basic, 3239 3240xterm-sco|xterm with SCO function keys, 3241 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 3242 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, 3243 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, 3244 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, 3245 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, 3246 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, 3247 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, 3248 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, 3249 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, 3250 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, 3251 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, 3252 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I, 3253 use=xterm-basic, 3254 3255# The xterm-new description has all of the features, but is not completely 3256# compatible with vt220. If you are using a Sun or PC keyboard, set the 3257# sunKeyboard resource to true: 3258# + maps the editing keypad 3259# + interprets control-function-key as a second array of keys, so a 3260# 12-fkey keyboard can support vt220's 20-fkeys. 3261# + maps numeric keypad "+" to ",". 3262# + uses DEC-style control sequences for the application keypad. 3263# 3264xterm-vt220|xterm emulating vt220, 3265 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 3266 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 3267 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 3268 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, 3269 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3270 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 3271 use=xterm-basic, use=vt220+keypad, 3272 3273xterm-vt52|xterm emulating dec vt52, 3274 cols#80, it#8, lines#24, 3275 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3276 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, 3277 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK, 3278 home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 3279 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, 3280 3281xterm-noapp|xterm with cursor keys in normal mode, 3282 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rmcup@, 3283 rmkx=\E>, smcup@, smkx=\E=, use=xterm, 3284 3285xterm-24|vs100|xterms|xterm terminal emulator (X Window System), 3286 lines#24, use=xterm, 3287 3288# This is xterm for ncurses. 3289xterm|xterm terminal emulator (X Window System), 3290 use=xterm-new, 3291 3292# These entries allow access to the X titlebar and icon name as a status line. 3293# Note that twm (and possibly window managers descended from it such as tvtwm, 3294# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess 3295# with it. 3296xterm+sl|access X title line and icon name, 3297 hs, 3298 wsl#40, 3299 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm, 3300xterm+sl-twm|access X title line (pacify twm-descended window managers), 3301 hs, 3302 wsl#40, 3303 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm, 3304 3305# 3306# The following xterm variants don't depend on your base version 3307# 3308# xterm with bold instead of underline 3309xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold, 3310 smso=\E[7m, smul=\E[1m, use=xterm, 3311# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr) 3312# (kterm should not invoke DEC Graphics as the alternate character set 3313# -- Kenji Rikitake) 3314# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics 3315# -- MATSUMOTO Shoji) 3316# kterm implements acsc via built-in table of X Drawable's 3317kterm|kterm kanji terminal emulator (X window system), 3318 eslok, hs, 3319 ncv@, 3320 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~, 3321 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F, 3322 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7, 3323 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, 3324 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, 3325 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color, 3326kterm-color|kterm-co|kterm with ANSI colors, 3327 ncv@, use=kterm, use=ecma+color, 3328# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file 3329xterm-nic|xterm with ich/ich1 suppressed for non-curses programs, 3330 ich@, ich1@, use=xterm, 3331# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996 3332xterm1|xterm terminal emulator ignoring the alternate screen buffer, 3333 rmcup@, smcup@, use=xterm, 3334 3335# This describes the capabilities of color_xterm, an xterm variant from 3336# before ECMA-64 color support was folded into the main-line xterm release. 3337# This entry is straight from color_xterm's maintainer. 3338# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996 3339# The README's with the distribution also say that it supports SGR 21, 24, 25 3340# and 27, but they are not present in the terminfo or termcap. 3341color_xterm|cx|cx100|color_xterm color terminal emulator for X, 3342 OTbs, am, km, mir, msgr, xenl, 3343 cols#80, it#8, lines#65, ncv@, 3344 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3345 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 3346 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3347 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3348 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3349 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 3350 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I, 3351 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 3352 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD, 3353 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~, 3354 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, 3355 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 3356 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~, 3357 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM, 3358 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l, 3359 rmso=\E[27m, rmul=\E[24m, 3360 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<, 3361 sc=\E7, 3362 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3363 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h, 3364 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m, 3365 smul=\E[4m, use=ecma+color, use=vt220+keypad, 3366 3367# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of 3368# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support 3369# SGR 39 or 49. SGR 0 does reset colors (along with everything else). This 3370# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except 3371# that each of those implements the home, end, delete keys differently. 3372# 3373# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce 3374# colors; note that this is not compatible with the 5.2 version. 3375# csw (2002-05-15): make xterm-color primary instead of nxterm, to 3376# match XFree86's xterm.terminfo usage and prevent circular links 3377xterm-color|nxterm|generic color xterm, 3378 ncv@, 3379 op=\E[m, use=xterm-r6, use=klone+color, 3380 3381# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0 3382gnome-rh62|Gnome terminal, 3383 bce, 3384 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 3385 use=xterm-color, 3386 3387# GNOME Terminal 1.4.0.4 (Redhat 7.2) 3388# 3389# This implements a subset of vt102 with a random selection of features from 3390# other terminals such as color and function-keys. 3391# 3392# shift-f1 to shift-f10 are f11 to f20 3393# 3394# NumLock changes the application keypad to approximate vt100 keypad, except 3395# that there is no escape sequence matching comma (,). 3396# 3397# Other defects observed: 3398# vt100 LNM mode is not implemented. 3399# vt100 80/132 column mode is not implemented. 3400# vt100 DECALN is not implemented. 3401# vt100 DECSCNM mode is not implemented, so flash does not work. 3402# vt100 TBC (tab reset) is not implemented. 3403# xterm alternate screen controls do not restore cursor position properly 3404# it hangs in tack after running function-keys test. 3405gnome-rh72|GNOME Terminal, 3406 bce, km@, 3407 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP, 3408 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l, 3409 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;, 3410 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color, 3411 3412# GNOME Terminal 2.0.1 (Redhat 8.0) 3413# 3414# Documentation now claims it implements vt220 (which is demonstrably false). 3415# However, it does implement ECH, which is a vt220 feature. And there are 3416# workable vt100 LNM, DECALN, DECSNM modes, making it possible to display 3417# more of its bugs using vttest. 3418# 3419# However, note that bce and msgr are broken in this release. Tabs (tbc and 3420# hts) are broken as well. Sometimes flash (as in xterm-new) works. 3421# 3422# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu 3423# operations. Shift-tab generates a distinct sequence so it can be argued 3424# that it implements kcbt. 3425gnome-rh80|GNOME Terminal, 3426 bce@, msgr@, 3427 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177, 3428 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72, 3429 3430# GNOME Terminal 2.2.1 (Redhat 9.0) 3431# 3432# bce and msgr are repaired. 3433gnome-rh90|GNOME Terminal, 3434 bce, msgr, 3435 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C, 3436 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g, 3437 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys, 3438 use=gnome-rh80, 3439 3440# GNOME Terminal 2.14.2 (Fedora Core 5) 3441# Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002. 3442gnome-fc5|GNOME Terminal, 3443 rs1=\Ec, 3444 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 3445 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90, 3446 3447gnome|GNOME Terminal, 3448 use=gnome-fc5, 3449 3450gnome-256color|GNOME Terminal with xterm 256-colors, 3451 use=xterm+256color, use=gnome, 3452 3453# XFCE Terminal 0.2.5.4beta2 3454# 3455# This is based on some of the same source code, e.g., the VTE library, as 3456# gnome-terminal, but has fewer features, fails more screens in vttest. 3457# Since most of the terminfo-related behavior is due to the VTE library, 3458# the terminfo is the same as gnome-terminal. 3459xfce|Xfce Terminal, 3460 use=gnome, 3461 3462# Multi-Gnome-Terminal 1.6.2 3463# 3464# This does not use VTE, and does have different behavior (compare xfce and 3465# gnome). 3466mgt|Multi GNOME Terminal, 3467 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333, 3468 3469# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce 3470# or not is debatable). 3471kvt|KDE terminal, 3472 bce, km@, 3473 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color, 3474 3475# Konsole 1.0.1 3476# (formerly known as kvt) 3477# 3478# This program hardcodes $TERM to 'xterm', which is not accurate. However, to 3479# simplify this entry (and point out why konsole isn't xterm), we base this on 3480# xterm-r6. The default keyboard appears to be 'linux'. 3481# 3482# Notes: 3483# a) konsole implements several features from XFree86 xterm, though none of 3484# that is documented - except of course in its source code - apparently 3485# because its implementors are unaccustomed to reading documentation - as 3486# evidenced by the sparse and poorly edited documentation distributed with 3487# konsole. Some features such as the 1049 private mode are recognized but 3488# incorrectly implemented as a duplicate of the 47 private mode. 3489# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad 3490# sends PC-style escapes rather than vt100. 3491# c) fails vttest menu 3 (Test of character sets) because it does not properly 3492# parse some control sequences. Also fails vttest Primary Device Attributes 3493# by sending a bogus code (in the source it says it's supposed to be a 3494# vt220, which is doubly incorrect because it does not implement vt220 3495# control sequences except for a few special cases). Treat it as a 3496# mildly-broken vt102. 3497# 3498# Update for konsole 1.3.2: 3499# The 1049 private mode works (but see the other xterm screens in vttest). 3500# Primary Device Attributes now returns the code for a vt100 with advanced 3501# video option. Perhaps that's intended to be a "mildly-broken vt102". 3502# 3503# Updated for konsole 1.6.4: 3504# add konsole-solaris 3505konsole-base|KDE console window, 3506 bce, km@, npc, 3507 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h, 3508 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, 3509 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@, 3510 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, 3511 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, 3512 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l, 3513 rmso=\E[27m, rmul=\E[24m, 3514 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 3515 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3516 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd, 3517 use=ecma+color, use=xterm-r6, 3518konsole-linux|KDE console window with linux keyboard, 3519 kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, 3520 kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, 3521 kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, 3522 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3523 use=konsole-base, 3524konsole-solaris|KDE console window with Solaris keyboard, 3525 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100, 3526# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather 3527# than testing the code. 3528konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm, 3529 kend=\E[4~, khome=\E[1~, use=konsole-vt100, 3530# The value for kbs reflects local customization rather than the settings used 3531# for XFree86 xterm. 3532konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm, 3533 kend=\EOF, kf1=\EOP, kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, 3534 kf16=\EO2S, kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, 3535 kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 3536 kf23=\E[23;2~, kf24=\E[24;2~, kf3=\EOR, kf4=\EOS, 3537 khome=\EOH, use=konsole-vt100, 3538# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but 3539# it is still useful for deriving the other entries. 3540konsole-vt100|KDE console window with vt100 (sic) keyboard, 3541 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~, 3542 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, 3543 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~, 3544 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3545 khome=\E[H, use=konsole-base, 3546konsole-vt420pc|KDE console window with vt420 pc keyboard, 3547 kbs=^H, kdch1=\177, use=konsole-vt100, 3548konsole-16color|klone of xterm-16color, 3549 ncv#32, use=ibm+16color, use=konsole, 3550# make a default entry for konsole 3551konsole|KDE console window, 3552 use=konsole-xf4x, 3553 3554# Based on mlterm 2.9.2's mlterm.ti, with corrections/additions from reading 3555# the source code and running tack -TD 3556# 3557# This is nominally a vt102 emulator, with features borrowed from rxvt and 3558# xterm. 3559# 3560# There are some problems with vttest: 3561# test of character sets leaves it in line-drawing mode. 3562mlterm|multi lingual terminal emulator, 3563 am, eslok, km, mc5i, mir, msgr, npc, xenl, 3564 colors#8, cols#80, it#8, lines#24, pairs#64, 3565 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3566 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 3567 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 3568 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3569 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3570 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3571 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 3572 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=, 3573 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 3574 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, 3575 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, 3576 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 3577 kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\E[11~, kf10=\E[21~, 3578 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, 3579 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 3580 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~, 3581 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, mc0=\E[i, 3582 nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, 3583 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, 3584 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>, 3585 rmso=\E[27m, rmul=\E[24m, 3586 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l, 3587 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 3588 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, 3589 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7\E[?47h, 3590 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 3591 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq, 3592 3593# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997 3594# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997 3595# Notes: 3596# rxvt 2.21b uses 3597# smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O, 3598# but some applications don't work with that. 3599# It also has an AIX extension 3600# box2=lqkxjmwuvtn, 3601# and 3602# ech=\E[%p1%dX, 3603# but the latter does not work correctly. 3604# 3605# The distributed terminfo says it implements hpa and vpa, but they are not 3606# implemented correctly, using relative rather than absolute positioning. 3607# 3608# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM. 3609# Since rxvt is not really compatible with xterm, it should be configured as 3610# "rxvt" (monochrome) and "rxvt-color". 3611# 3612# removed dch/dch1 because they are inconsistent with bce/ech -TD 3613# remove km as per tack test -TD 3614rxvt-basic|rxvt terminal base (X Window System), 3615 OTbs, am, bce, eo, mir, msgr, xenl, xon, 3616 cols#80, it#8, lines#24, 3617 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3618 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 3619 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 3620 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3621 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3622 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3623 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 3624 enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I, 3625 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 3626 ind=^J, is1=\E[?47l\E=\E[?1l, 3627 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H, 3628 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 3629 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m, 3630 rmul=\E[24m, 3631 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 3632 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 3633 s0ds=\E(B, s1ds=\E(0, sc=\E7, 3634 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3635 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, 3636 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq, 3637 use=rxvt+pcfkeys, use=vt220+keypad, 3638# Key Codes from rxvt reference: 3639# 3640# Note: Shift + F1-F10 generates F11-F20 3641# 3642# For the keypad, use Shift to temporarily override Application-Keypad 3643# setting use Num_Lock to toggle Application-Keypad setting if Num_Lock 3644# is off, escape sequences toggle Application-Keypad setting. 3645# Also note that values of Home, End, Delete may have been compiled 3646# differently on your system. 3647# 3648# Normal Shift Control Ctrl+Shift 3649# Tab ^I ESC [ Z ^I ESC [ Z 3650# BackSpace ^H ^? ^? ^? 3651# Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @ 3652# Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @ 3653# Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ 3654# Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @ 3655# Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @ 3656# Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @ 3657# Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @ 3658# End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @ 3659# Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ 3660# F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^ 3661# F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^ 3662# F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^ 3663# F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^ 3664# F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^ 3665# F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^ 3666# F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^ 3667# F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^ 3668# F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^ 3669# F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^ 3670# F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @ 3671# F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @ 3672# F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @ 3673# F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @ 3674# F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @ 3675# F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @ 3676# F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @ 3677# F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @ 3678# F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @ 3679# F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @ 3680# Application 3681# Up ESC [ A ESC [ a ESC O a ESC O A 3682# Down ESC [ B ESC [ b ESC O b ESC O B 3683# Right ESC [ C ESC [ c ESC O c ESC O C 3684# Left ESC [ D ESC [ d ESC O d ESC O D 3685# KP_Enter ^M ESC O M 3686# KP_F1 ESC O P ESC O P 3687# KP_F2 ESC O Q ESC O Q 3688# KP_F3 ESC O R ESC O R 3689# KP_F4 ESC O S ESC O S 3690# XK_KP_Multiply * ESC O j 3691# XK_KP_Add + ESC O k 3692# XK_KP_Separator , ESC O l 3693# XK_KP_Subtract - ESC O m 3694# XK_KP_Decimal . ESC O n 3695# XK_KP_Divide / ESC O o 3696# XK_KP_0 0 ESC O p 3697# XK_KP_1 1 ESC O q 3698# XK_KP_2 2 ESC O r 3699# XK_KP_3 3 ESC O s 3700# XK_KP_4 4 ESC O t 3701# XK_KP_5 5 ESC O u 3702# XK_KP_6 6 ESC O v 3703# XK_KP_7 7 ESC O w 3704# XK_KP_8 8 ESC O x 3705# XK_KP_9 9 ESC O y 3706# 3707# kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD 3708# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD 3709rxvt+pcfkeys|fragment for PC-style fkeys, 3710 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E2$, kLFT=\E[d, 3711 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B, 3712 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^, 3713 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 3714 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 3715 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 3716 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$, 3717 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^, 3718 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~, 3719 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^, 3720 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^, 3721 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^, 3722 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@, 3723 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3724 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 3725 kslt=\E[4~, kDN=\E[b, kDN5=\EOb, kLFT5=\EOd, kRIT5=\EOc, 3726 kUP=\E[a, kUP5=\EOa, 3727 3728rxvt|rxvt terminal emulator (X Window System), 3729 ncv@, 3730 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017, 3731 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color, 3732rxvt-color|rxvt terminal emulator (X Window System), 3733 use=rxvt, 3734rxvt-256color|rxvt 2.7.9 with xterm 256-colors, 3735 use=xterm+256color, use=rxvt, 3736rxvt-xpm|rxvt terminal emulator (X Window System), 3737 use=rxvt, 3738rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin, 3739 acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 3740 use=rxvt, 3741rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin, 3742 acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376, 3743 use=rxvt-cygwin, 3744 3745# This variant is supposed to work with rxvt 2.7.7 when compiled with 3746# NO_BRIGHTCOLOR defined. rxvt needs more work... 3747rxvt-16color|xterm with 16 colors like aixterm, 3748 ncv#32, use=ibm+16color, use=rxvt, 3749 3750# From: Michael Jennings <mej@valinux.com> 3751# 3752# Eterm 0.9.3 3753# 3754# removed kf0 which conflicts with kf10 -TD 3755# remove cvvis which conflicts with cnorm -TD 3756# Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT 3757# but does otherwise follow the rxvt+pcfkeys model -TD 3758# remove nonworking flash -TD 3759# remove km as per tack test -TD 3760Eterm|Eterm-color|Eterm with xterm-style color support (X Window System), 3761 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, 3762 btns#5, cols#80, it#8, lines#24, lm#0, ncv@, 3763 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3764 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 3765 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 3766 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3767 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 3768 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3769 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 3770 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 3771 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 3772 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 3773 is1=\E[?47l\E>\E[?1l, 3774 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@, 3775 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H, 3776 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M, 3777 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 3778 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=, 3779 rmso=\E[27m, rmul=\E[24m, 3780 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 3781 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 3782 sc=\E7, 3783 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3784 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, 3785 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 3786 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys, 3787 use=ecma+color, 3788 3789# xiterm 0.5-5.2 3790# This is not based on xterm's source... 3791# vttest shows several problems with keyboard, cursor-movements. 3792# see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm 3793xiterm|internationalized terminal emulator for X, 3794 km@, 3795 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6, 3796 3797# These (xtermc and xtermm) are distributed with Solaris. They refer to a 3798# variant of xterm which is apparently no longer supported, but are interesting 3799# because they illustrate SVr4 curses mouse controls - T.Dickey 3800xtermm|xterm terminal emulator (monocrome), 3801 OTbs, am, km, mir, msgr, xenl, 3802 btns#3, cols#80, it#8, lines#24, 3803 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3804 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 3805 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D, 3806 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3807 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3808 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 3809 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY, 3810 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 3811 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, 3812 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy, 3813 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU, 3814 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_, 3815 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM, 3816 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m, 3817 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 3818 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 3819 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3820 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1, 3821 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys, 3822 3823xtermc|xterm terminal emulator (color), 3824 colors#8, ncv#7, pairs#64, 3825 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 3826 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3827 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3828 use=xtermm, 3829 3830# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995 3831# Here's a termcap entry I've been using for xterm_color, which comes 3832# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the 3833# color stuff, I also have a status line defined as the window manager 3834# title bar. [I have translated it to terminfo -- ESR] 3835xterm-pcolor|xterm with color used for highlights and status line, 3836 bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m, 3837 smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6, 3838 3839# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in 3840# from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS 3841# chars look like --esr) 3842hpterm|X-hpterm|hp X11 terminal emulator, 3843 am, da, db, mir, xhp, 3844 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0, 3845 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, 3846 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, 3847 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK, 3848 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H, 3849 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 3850 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, 3851 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, 3852 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, 3853 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El, 3854 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s, 3855 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, 3856 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, 3857 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET, 3858 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, 3859 rmul=\E&d@, 3860 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, 3861 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, 3862 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 3863# HPUX 11 provides a color version. 3864hpterm-color|HP X11 terminal emulator with color, 3865 ccc, 3866 colors#64, pairs#8, 3867 home=\E&a0y0C, 3868 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI, 3869 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm, 3870 3871# This entry describes an xterm with Sun-style function keys enabled 3872# via the X resource setting "xterm*sunFunctionKeys:true" 3873# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same. 3874# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z> 3875# because we want it to be seen as <kcpy>. 3876# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance 3877# with their Sun keyboard labels instead. 3878# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996 3879xterm-sun|xterm with sunFunctionKeys true, 3880 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB, 3881 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z, 3882 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z, 3883 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z, 3884 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z, 3885 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z, 3886 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z, 3887 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z, 3888 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z, 3889 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, 3890 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z, 3891 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z, 3892 use=xterm-basic, 3893xterms-sun|small (80x24) xterm with sunFunctionKeys true, 3894 cols#80, lines#24, use=xterm-sun, 3895 3896# This is for the extensible terminal emulator on the X11R6 contrib tape. 3897# It corresponds to emu's internal emulation: 3898# emu -term emu 3899# emu's default sets TERM to "xterm", but that doesn't work well -TD 3900# fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD 3901# fixes: add civis, cnorm, sgr -TD 3902emu|emu native mode, 3903 am, bce, mir, msgr, xon, 3904 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200, 3905 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244, 3906 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;, 3907 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;, 3908 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\ED, 3909 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA, 3910 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;, 3911 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I, 3912 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, 3913 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, 3914 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01, 3915 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14, 3916 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19, 3917 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05, 3918 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind, 3919 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel, 3920 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES, 3921 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;, 3922 setaf=\Er%i%p1%d;, 3923 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;, 3924 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej, 3925 3926# vt220 Terminfo entry for the Emu emulation, corresponds to 3927# emu -term vt220 3928# with NumLock set (to make the keypad transmit kf0-kf9). 3929# fixes: add am, xenl, corrected sgr0 -TD 3930emu-220|Emu-220 (vt200-7bit mode), 3931 am, xenl, xon, 3932 cols#80, it#8, lines#24, vt#200, 3933 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 3934 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l, 3935 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M, 3936 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D, 3937 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, 3938 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, 3939 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M, 3940 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I, 3941 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL, 3942 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h, 3943 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 3944 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq, 3945 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ, 3946 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~, 3947 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~, 3948 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~, 3949 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw, 3950 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, 3951 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m, 3952 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m, 3953 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7, 3954 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 3955 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=, 3956 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, 3957# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI, 3958# print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings 3959# indicate that it emulates more than one terminal, but incompletely. 3960# 3961# This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net> 3962# It is based on vt102's entry, with some subtle differences, but also 3963# has status line 3964# supports ANSI colors (except for 'op' string) 3965# apparently implements alternate screen like xterm 3966# does not use padding, of course. 3967mvterm|vv100|SwitchTerm aka mvTERM, 3968 am, eslok, hs, km, mir, msgr, xenl, 3969 colors#8, cols#80, it#8, lines#24, pairs#64, 3970 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3971 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 3972 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3973 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3974 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3975 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 3976 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, 3977 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 3978 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, 3979 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy, 3980 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, 3981 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 3982 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m, 3983 rmul=\E[m, 3984 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H, 3985 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 3986 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3987 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, 3988 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 3989 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys, 3990 3991### MTERM 3992# 3993# This application is available by email from <mouse@Rodents.Montreal.QC.CA>. 3994# 3995# "mterm -type ansi" sets $TERM to "ansi" 3996mterm-ansi|ANSI emulation, 3997 am, bw, mir, msgr, 3998 it#8, 3999 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4000 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 4001 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 4002 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 4003 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 4004 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, 4005 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, 4006 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, 4007 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m, 4008 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m, 4009 rmul=\E[24m, 4010 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 4011 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, 4012 vpa=\E[%i%p1%dd, 4013# mterm normally sets $TERM to "mterm" 4014mterm|mouse-sun|Der Mouse term, 4015 am, bw, mir, 4016 it#8, 4017 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S, 4018 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C, 4019 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W, 4020 rmir=^O, rmso=^T, smir=^Q, smso=^V, 4021# "mterm -type decansi" sets $TERM to "decansi" 4022# 4023# note: kdch1, kfnd, kslt are in the source code, but do not work -TD 4024decansi|ANSI emulation with DEC compatibility hacks, 4025 am, mir, msgr, xenl, 4026 colors#8, it#8, pairs#64, 4027 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4028 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 4029 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 4030 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 4031 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 4032 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4033 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 4034 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0, 4035 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL, 4036 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, 4037 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB, 4038 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~, 4039 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 4040 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 4041 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, 4042 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 4043 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, 4044 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m, 4045 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 4046 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7, 4047 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4048 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 4049 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, 4050 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR, 4051 u7=\E[6n, vpa=\E[%i%p1%dd, 4052 4053#### MGR 4054# 4055# MGR is a Bell Labs window system lighter-weight than X. 4056# These entries describe MGR's xterm-equivalent. 4057# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997 4058# 4059 4060mgr|Bellcore MGR (non X) window system terminal emulation, 4061 am, km, 4062 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M, 4063 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er, 4064 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h, 4065 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>, 4066 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u, 4067 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>, 4068 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 4069 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S, 4070 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n, 4071 smul=\E4n, 4072mgr-sun|Mgr window with Sun keyboard, 4073 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z, 4074 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z, 4075 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, 4076 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, 4077 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, 4078 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z, 4079 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr, 4080mgr-linux|Mgr window with Linux keyboard, 4081 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~, 4082 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~, 4083 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, 4084 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4085 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr, 4086 4087######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS 4088# 4089 4090# Columbus UNIX virtual terminal. This terminal also appears in 4091# UNIX 4.0 and successors as line discipline 1 (?), but is 4092# undocumented and does not really work quite right. 4093cbunix|cb unix virtual terminal, 4094 OTbs, am, da, db, 4095 cols#80, lines#24, lm#0, 4096 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 4097 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL, 4098 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB, 4099 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A, 4100 smso=\Ea^D, smul=\Ea^A, 4101# (vremote: removed obsolete ":nl@:" -- esr) 4102vremote|virtual remote terminal, 4103 am@, 4104 cols#79, use=cbunix, 4105 4106pty|4bsd pseudo teletype, 4107 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!, 4108 smso=\Ea$, smul=\Ea!, use=cbunix, 4109 4110# The codes supported by the term.el terminal emulation in GNU Emacs 19.30 4111eterm|gnu emacs term.el terminal emulation, 4112 am, mir, xenl, 4113 cols#80, lines#24, 4114 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, 4115 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4116 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4117 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4118 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 4119 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, 4120 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m, 4121 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m, 4122 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m, 4123 smul=\E[4m, 4124 4125# Entries for use by the `screen' program by Juergen Weigert, 4126# Michael Schroeder, Oliver Laumann. The screen and 4127# screen-w entries came with version 3.7.1. The screen2 and screen3 entries 4128# come from University of Wisconsin and may be older. 4129# (screen: added <cnorm> on ANSI model -- esr) 4130# 4131# 'screen' defines extensions to termcap. Some are used in its terminal 4132# description: 4133# G0 (bool) Terminal can deal with ISO 2022 font selection sequences. 4134# AX (bool) Does understand ANSI set default fg/bg color 4135# (\E[39m / \E[49m). 4136# S0 (str) Switch charset 'G0' to the specified charset. 4137# E0 (str) Switch charset 'G0' back to standard charset. 4138# 4139# tested with screen 3.09.08 4140screen|VT 100/ANSI X3.64 virtual terminal, 4141 OTbs, OTpt, am, km, mir, msgr, xenl, G0, 4142 colors#8, cols#80, it#8, lines#24, pairs#64, 4143 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4144 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 4145 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M, 4146 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4147 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4148 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 4149 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 4150 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 4151 flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 4152 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z, 4153 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 4154 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, 4155 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 4156 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4157 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 4158 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 4159 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m, 4160 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7, 4161 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 4162 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h, 4163 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B, 4164 S0=\E(%p1%c, use=ecma+color, 4165# The bce and status-line entries are from screen 3.9.13 (and require some 4166# changes to .screenrc). 4167screen-bce|VT 100/ANSI X3.64 virtual terminal with bce, 4168 bce, use=screen, 4169screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line, 4170 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen, 4171 4172# ====================================================================== 4173# Entries for GNU Screen with 16 colors. 4174# Those variations permit to benefit from 16 colors palette, and from 4175# bold font and blink attribute separated from bright colors. But they 4176# are less portable than the generic "screen" 8 color entries: Their 4177# usage makes real sense only if the terminals you attach and reattach 4178# do all support 16 color palette. 4179 4180screen-16color|GNU Screen with 16 colors, 4181 use=ibm+16color, use=screen, 4182 4183screen-16color-s|GNU Screen with 16 colors and status line, 4184 use=ibm+16color, use=screen-s, 4185 4186screen-16color-bce|GNU Screen with 16 colors and BCE, 4187 use=ibm+16color, use=screen-bce, 4188 4189screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line, 4190 bce, use=ibm+16color, use=screen-s, 4191 4192# ====================================================================== 4193# Entries for GNU Screen 4.02 with --enable-colors256. 4194 4195screen-256color|GNU Screen with 256 colors, 4196 ccc@, 4197 initc@, use=xterm+256color, use=screen, 4198 4199screen-256color-s|GNU Screen with 256 colors and status line, 4200 ccc@, 4201 initc@, use=xterm+256color, use=screen-s, 4202 4203screen-256color-bce|GNU Screen with 256 colors and BCE, 4204 ccc@, 4205 initc@, use=xterm+256color, use=screen-bce, 4206 4207screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line, 4208 bce, ccc@, 4209 initc@, use=xterm+256color, use=screen-s, 4210 4211# ====================================================================== 4212 4213# Read the fine manpage: 4214# When screen tries to figure out a terminal name for 4215# itself, it first looks for an entry named "screen.<term>", 4216# where <term> is the contents of your $TERM variable. If 4217# no such entry exists, screen tries "screen" (or "screen-w" 4218# if the terminal is wide (132 cols or more)). If even this 4219# entry cannot be found, "vt100" is used as a substitute. 4220# 4221# Here are a few customized entries which are useful -TD 4222# 4223# Notes: 4224# (a) screen does not support invis. 4225# (b) screen's implementation of bw is incorrect according to tack. 4226# (c) screen appears to hardcode the strings for khome/kend, making it 4227# necessary to override the "use=" clause's values. 4228# (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry, 4229# which is NOT the same as the terminfo screen.<term>. 4230# (e) when screen finds one of these customized entries, it sets $TERM to 4231# match. Hence, no "screen.xterm" entry is provided, since that would 4232# create heartburn for people running remote xterm's. 4233# 4234# xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV 4235# since the default translations override the built-in keycode 4236# translation. They are suppressed here to show what is tested by tack. 4237screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm, 4238 bce@, bw, 4239 invis@, kIC@, kNXT@, kPRV@, kend=\E[4~, khome=\E[1~, meml@, 4240 memu@, 4241 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m, 4242 use=xterm-new, 4243# xterm-r6 does not really support khome/kend unless it is propped up by 4244# the translations resource. 4245screen.xterm-r6|screen customized for X11R6 xterm, 4246 bw, use=xterm-r6, 4247# Color applications running in screen and TeraTerm do not play well together 4248# on Solaris because Sun's curses implementation gets confused. 4249screen.teraterm|disable ncv in teraterm, 4250 ncv#127, 4251 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 4252 use=screen, 4253# fix the backspace key 4254screen.linux|screen in linux console, 4255 bw, 4256 kbs=\177, kcbt@, use=screen, 4257 4258screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols, 4259 cols#132, use=screen, 4260 4261screen2|old VT 100/ANSI X3.64 virtual terminal, 4262 cols#80, it#8, lines#24, 4263 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H, 4264 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 4265 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4266 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 4267 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL, 4268 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 4269 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, 4270 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, 4271 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m, 4272 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h, 4273 smso=\E[3m, smul=\E[4m, tbc=\E[3g, 4274# (screen3: removed unknown ":xv:LP:G0:" -- esr) 4275screen3|older VT 100/ANSI X3.64 virtual terminal, 4276 km, mir, msgr, 4277 cols#80, it#8, lines#24, 4278 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 4279 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4280 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4281 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 4282 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 4283 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 4284 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD, 4285 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, 4286 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 4287 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec, 4288 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m, 4289 smul=\E[4m, tbc=\E[3g, 4290 4291# Francesco Potorti <F.Potorti@cnuce.cnr.it>: 4292# NCSA telnet is one of the most used telnet clients for the Macintosh. It has 4293# been maintained until recently by the National Center for Supercomputer 4294# Applications, and it is feature rich, stable and free. It can be downloaded 4295# from www.ncsa.edu. This terminfo description file is based on xterm-vt220, 4296# xterm+sl, and the docs at NCSA. It works well. 4297# 4298# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode 4299# The terminal options should be set as follows: 4300# Xterm sequences ON 4301# use VT wrap mode ON 4302# use Emacs arrow keys OFF 4303# CTRL-COMND is Emacs meta ON 4304# 8 bit mode ON 4305# answerback string: "ncsa-vt220-8" 4306# setup keys: all disabled 4307# 4308# Application mode is not used. 4309# 4310# Other special mappings: 4311# Apple VT220 4312# HELP Find 4313# HOME Insert here 4314# PAGEUP Remove 4315# DEL Select 4316# END Prev Screen 4317# PAGEDOWN Next Screen 4318# 4319# Though it supports ANSI color, NCSA Telnet uses color to represent blinking 4320# text. 4321# 4322# The status-line manipulation is a mapping of the xterm-compatible control 4323# sequences for setting the window-title. So you must use tsl and fsl in 4324# pairs, since the latter ends the string that is loaded to the window-title. 4325ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, 4326 am, hs, km, mir, msgr, xenl, 4327 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4328 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 4329 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 4330 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4331 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4332 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4333 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 4334 dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 4335 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH, 4336 ich=\E[%p1%d@, if=/usr/share/tabset/vt100, 4337 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>, 4338 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H, 4339 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 4340 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~, 4341 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~, 4342 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, 4343 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~, 4344 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i, 4345 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM, 4346 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l, 4347 rmso=\E[27m, rmul=\E[24m, 4348 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7, 4349 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, 4350 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7, 4351 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;, 4352 u8=\E[?62;1;6c, use=ansi+enq, 4353ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, 4354 use=ncsa-m, use=klone+color, 4355ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, 4356 hs@, 4357 dsl@, fsl@, tsl@, use=ncsa, 4358ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, 4359 hs@, 4360 dsl@, fsl@, tsl@, use=ncsa-m, 4361# alternate -TD: 4362# The documented function-key mapping refers to the Apple Extended Keyboard 4363# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style 4364# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on 4365# some keyboards and many applications require these as F1-F4. 4366# 4367ncsa-vt220|NCSA Telnet using vt220-compatible function keys, 4368 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 4369 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 4370 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, 4371 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, 4372 kf8=\E[19~, kf9=\E[20~, use=ncsa, 4373 4374#### Pilot Pro Palm-Top 4375# 4376# Termcap for Top Gun Telnet and SSH on the Palm Pilot. 4377# http://www.ai/~iang/TGssh/ 4378pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional, 4379 OTbs, am, xenl, 4380 cols#39, lines#16, 4381 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J, 4382 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I, 4383 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s, 4384 rmso=\EB, smso=\Eb, 4385 4386# From: Federico Bianchi <bianchi@www.arte.unipi.it> 4387# These entries are for the Embeddable Linux Kernel System (ELKS) 4388# project - an heavily stripped down Linux to be run on 16 bit 4389# boxes or, eventually, to be used in embedded systems - and have been 4390# adapted from the stock ELKS termcap. The project itself looks stalled, 4391# and the latest improvements I know of date back to March 2000. 4392# 4393# To cope with the ELKS dumb console I added an "elks-glasstty" entry; 4394# as an added bonus, this deals with all the capabilities common to 4395# both VT52 and ANSI (or, eventually, "special") modes. 4396 4397elks-glasstty|ELKS glass-TTY capabilities, 4398 OTbs, am, 4399 cols#80, it#8, lines#25, 4400 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, 4401 nel=^M^J, 4402 4403elks-vt52|ELKS vt52 console, 4404 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 4405 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK, 4406 home=\EH, use=elks-glasstty, 4407 4408elks-ansi|ELKS ANSI console, 4409 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 4410 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 4411 rmso=\E[m, smso=\E[7m, use=elks-glasstty, 4412 4413# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation 4414# instead of VT52, but the "elks" entry still refers to the latter. 4415 4416elks|default ELKS console, 4417 use=elks-vt52, 4418 4419# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS 4420# one but in screen size 4421 4422sibo|ELKS SIBO console, 4423 cols#61, it#8, lines#20, use=elks-vt52, 4424 4425######## COMMERCIAL WORKSTATION CONSOLES 4426# 4427 4428#### Alpha consoles 4429# 4430 4431# This is from the OSF/1 Release 1.0 termcap file 4432pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation, 4433 am, xon, 4434 cols#80, lines#25, 4435 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 4436 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 4437 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H, 4438 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 4439 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m, 4440 4441#### Sun consoles 4442# 4443 4444# :is1: resets scrolling region in case a previous user had used "tset vt100" 4445oldsun|Sun Microsystems Workstation console, 4446 OTbs, am, km, mir, msgr, 4447 cols#80, it#8, lines#34, 4448 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, 4449 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 4450 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, 4451 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 4452 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 4453 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, 4454 rmso=\E[m, sgr0=\E[m, smso=\E[7m, 4455# From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995 4456# <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com> 4457# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998) 4458sun-il|Sun Microsystems console with working insert-line, 4459 am, km, msgr, 4460 cols#80, lines#34, 4461 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 4462 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 4463 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, 4464 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 4465 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 4466 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z, 4467 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z, 4468 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z, 4469 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z, 4470 knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z, 4471 kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s, 4472 sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, smso=\E[7m, 4473 u8=\E[1t, u9=\E[11t, 4474# On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il> 4475# flake out on the last line. Unfortunately, without them the terminal has no 4476# way to scroll. 4477sun-cgsix|sun-ss5|Sun SparcStation 5 console, 4478 il@, il1@, use=sun-il, 4479# If you are using an SS5, change the sun definition to use sun-ss5. 4480sun|sun1|sun2|Sun Microsystems Inc. workstation console, 4481 use=sun-il, 4482 4483# From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985 4484sun-s|Sun Microsystems Workstation window with status line, 4485 hs, 4486 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun, 4487sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs, 4488 hs, 4489 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e, 4490sun-48|Sun 48-line window, 4491 cols#80, lines#48, use=sun, 4492sun-34|Sun 34-line window, 4493 cols#80, lines#34, use=sun, 4494sun-24|Sun 24-line window, 4495 cols#80, lines#24, use=sun, 4496sun-17|Sun 17-line window, 4497 cols#80, lines#17, use=sun, 4498sun-12|Sun 12-line window, 4499 cols#80, lines#12, use=sun, 4500sun-1|Sun 1-line window for sysline, 4501 eslok, hs, 4502 cols#80, lines#1, 4503 dsl=^L, fsl=\E[K, tsl=^M, use=sun, 4504sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character, 4505 ich1@, rmir@, smir@, use=sun, 4506sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history, 4507 lines#35, 4508 rmcup=\E[>4h, smcup=\E[>4l, use=sun, 4509sun-type4|Sun Workstation console with type 4 keyboard, 4510 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z, 4511 kcuu1=\E[215z, use=sun-il, 4512 4513# Most of the current references to sun-color are from users wondering why this 4514# is the default on install. Details from reading the wscons manpage, adding 4515# cub, etc., here (rather than in the base sun-il entry) since it is not clear 4516# when those were added -TD 4517sun-color|Sun Microsystems Workstation console with color support (IA systems), 4518 colors#8, pairs#64, 4519 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 4520 cuu=\E[%p1%dA, home=\E[H, op=\E[m\E[p, setab=\E[4%p1%dm, 4521 setaf=\E[3%p1%dm, 4522 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 4523 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 4524 use=sun, 4525 4526#### Iris consoles 4527# 4528 4529# (wsiris: this had extension capabilities 4530# :HS=\E7F2:HE=\E7F7:\ 4531# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite: 4532# See the note on Iris extensions near the end of this file. 4533# Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> & 4534# <flash> from BRL -- esr) 4535wsiris|iris40|iris emulating a 40 line visual 50 (approximately), 4536 OTbs, OTnc, OTpt, am, 4537 OTkn#3, cols#80, it#8, lines#40, 4538 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB, 4539 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 4540 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK, 4541 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL, 4542 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB, 4543 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, 4544 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI, 4545 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P, 4546 smul=\E7R2\E9P, 4547 4548#### NeWS consoles 4549# 4550# Console terminal windows under the NeWS (Sun's Display Postscript windowing 4551# environment). Note: these have nothing to do with Sony's News workstation 4552# line. 4553# 4554 4555# Entry for NeWS's psterm from Eric Messick & Hugh Daniel 4556# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr) 4557psterm|psterm-basic|NeWS psterm-80x34, 4558 OTbs, am, hs, km, ul, 4559 cols#80, it#8, lines#34, 4560 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;, 4561 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY, 4562 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl, 4563 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D, 4564 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr, 4565 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^], 4566 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu, 4567 tsl=\EOl, 4568psterm-96x48|NeWS psterm 96x48, 4569 cols#96, lines#48, use=psterm, 4570psterm-90x28|NeWS psterm 90x28, 4571 cols#90, lines#28, use=psterm, 4572psterm-80x24|NeWS psterm 80x24, 4573 cols#80, lines#24, use=psterm, 4574# This is a faster termcap for psterm. Warning: if you use this termcap, 4575# some control characters you type will do strange things to the screen. 4576# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr) 4577psterm-fast|NeWS psterm fast version (flaky ctrl chars), 4578 OTbs, am, hs, km, ul, 4579 cols#80, it#8, lines#34, 4580 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;, 4581 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y, 4582 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I, 4583 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 4584 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni, 4585 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi, 4586 smso=^Oo, smul=^Ou, tsl=^Ol, 4587 4588#### NeXT consoles 4589# 4590# Use `glasstty' for the Workspace application 4591# 4592 4593# From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995 4594next|NeXT console, 4595 am, xt, 4596 cols#80, it#8, lines#24, 4597 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 4598 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 4599 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 4600 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m, 4601nextshell|NeXT Shell application, 4602 am, 4603 cols#80, 4604 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H, 4605 kcud1=^J, nel=^M^J, 4606 4607#### Sony NEWS workstations 4608# 4609 4610# (news-unk: this had :KB=news: -- esr) 4611news-unk|SONY NEWS vt100 emulator common entry, 4612 OTbs, OTpt, am, xenl, 4613 cols#80, 4614 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, 4615 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 4616 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, 4617 ed=\E[J, el=\E[K, home=\E[H, ht=^I, 4618 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L, 4619 is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD, 4620 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP, 4621 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, 4622 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM, 4623 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 4624 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7, 4625 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 4626# 4627# (news-29: this had :TY=ascii: --esr) 4628news-29, 4629 lines#29, use=news-unk, 4630# (news-29-euc: this had :TY=euc: --esr) 4631news-29-euc, 4632 use=news-29, 4633# (news-29-sjis: this had :TY=sjis: --esr) 4634news-29-sjis, 4635 use=news-29, 4636# 4637# (news-33: this had :TY=ascii: --esr) 4638news-33, 4639 lines#33, use=news-unk, 4640# (news-33-euc: this had :TY=euc: --esr) 4641news-33-euc, 4642 use=news-33, 4643# (news-33-sjis: this had :TY=sjis: --esr) 4644news-33-sjis, 4645 use=news-33, 4646# 4647# (news-42: this had :TY=ascii: --esr) 4648news-42, 4649 lines#42, use=news-unk, 4650# (news-42-euc: this had :TY=euc: --esr) 4651news-42-euc, 4652 use=news-42, 4653# (news-42-sjis: this had :TY=sjis: --esr) 4654news-42-sjis, 4655 use=news-42, 4656# 4657# NEWS-OS old termcap entry 4658# 4659# (news-old-unk: this had :KB=news:TY=sjis: --esr) 4660news-old-unk|SONY NEWS vt100 emulator common entry, 4661 OTbs, OTpt, am, xenl, 4662 cols#80, vt#3, 4663 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, 4664 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 4665 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 4666 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H, 4667 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 4668 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM, 4669 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 4670 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 4671 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 4672# 4673# (nwp512: this had :DE=^H:, which I think means <OTbs> --esr) 4674nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines, 4675 OTbs, 4676 lines#40, 4677 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, 4678 use=news-old-unk, 4679# 4680# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr) 4681nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line, 4682 lines#42, 4683 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8, 4684 use=news-old-unk, 4685# 4686# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr) 4687nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines, 4688 OTbs, 4689 lines#40, 4690 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, 4691 use=news-old-unk, 4692# 4693# (nwp513: this had :DE=^H: and the alias vt100-bm --esr) 4694nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines, 4695 OTbs, 4696 lines#31, 4697 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, 4698 use=news-old-unk, 4699# 4700# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr) 4701# also the alias vt100-bm. 4702nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines, 4703 OTbs, 4704 lines#33, 4705 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8, 4706 use=news-old-unk, 4707# 4708# (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr) 4709nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines, 4710 OTbs, 4711 lines#31, 4712 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, 4713 use=news-old-unk, 4714# 4715# (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr) 4716news28|sony vt100 emulator 28 lines, 4717 OTbs, 4718 lines#28, 4719 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8, 4720 use=news-old-unk, 4721# 4722# (news29: this had :TY=ascii:KB=nws1200:\ --esr) 4723news29|news28-a|sony vt100 emulator 29 lines, 4724 lines#29, 4725 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8, 4726 use=news-old-unk, 4727# 4728# (news511: this had :TY=sjis: --esr) 4729nwp511|nwp-511|nwp-511 vt100, 4730 OTbs, OTpt, am, xenl, 4731 cols#80, lines#24, 4732 clear=\E[;H\E[2J$<20/>, cuf1=\E[C, 4733 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M, 4734 ed=\E[J$<30/>, el=\E[K$<3/>, 4735 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, 4736 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D, 4737 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, 4738 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H, 4739 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, 4740 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h, 4741 smso=\E[7m$<2/>, smul=\E[4m$<2/>, 4742# (news517: this had :TY=sjis:. --esr) 4743nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows, 4744 eslok, hs, 4745 cols#80, lines#30, 4746 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, 4747 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 4748 tsl=\E[1$}\E[;%df, use=vt200, 4749# (news517-w: this had :TY=sjis:. --esr) 4750nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows, 4751 eslok, hs, 4752 cols#132, lines#50, 4753 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, 4754 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, 4755 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, 4756 tsl=\E[1$}\E[;%df, use=vt200, 4757 4758#### Common Desktop Environment 4759# 4760 4761# This ships with Sun's CDE in Solaris 2.5 4762# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net> 4763dtterm|CDE desktop terminal, 4764 am, mir, msgr, xenl, xon, 4765 cols#80, it#8, lines#24, lm#0, ncv@, 4766 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4767 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 4768 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 4769 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4770 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4771 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4772 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 4773 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 4774 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H, 4775 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 4776 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l, 4777 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 4778 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 4779 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 4780 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 4781 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 4782 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4783 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 4784 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 4785 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m, 4786 sc=\E7, 4787 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 4788 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 4789 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color, 4790 4791#### Non-Unix Consoles 4792# 4793 4794### EMX termcap.dat compatibility modes 4795# 4796# Keypad: Home=\0G Up=\0H PrPag=\0I 4797# ka1,kh kcuu1 kpp,ka3 4798# 4799# Left=\0K 5=\0L Right=\0M 4800# kcub1 kb2 kcuf1 4801# 4802# End=\0O Down=\0P NxPag=\0Q 4803# kc1,kend kcud1 kc3,knp 4804# 4805# Ins=\0R Del=\0S 4806# kich1 kdch1 4807# 4808# On keyboard with 12 function keys, 4809# shifted f-keys: F13-F24 4810# control f-keys: F25-F36 4811# alt f-keys: F37-F48 4812# The shift/control/alt keys do not modify each other, but alt overrides both, 4813# and control overrides shift. 4814# 4815# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the 4816# no_color_video to inform the application that standout(1), underline(2) 4817# reverse(4) and invisible(64) don't work with color. 4818emx-base|DOS special keys, 4819 bce, bw, 4820 it#8, ncv#71, 4821 bel=^G, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q, 4822 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H, 4823 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205, 4824 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W, 4825 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\, 4826 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_, 4827 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d, 4828 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212, 4829 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l, 4830 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q, 4831 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, 4832 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I, 4833 use=ansi.sys, 4834 4835# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b, 4836# a Unix-style environment used on OS/2. (Note that the suffix makes some 4837# names longer than 14 characters, the nominal maximum). 4838# 4839# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs. 4840ansi-emx|ANSI.SYS color, 4841 am, bce, eo, mir, msgr, xon, 4842 colors#8, cols#80, it#8, lines#25, pairs#64, 4843 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 4844 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, 4845 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 4846 dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, 4847 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J, 4848 kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J, 4849 rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m, 4850 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec, 4851 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4852 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m, 4853 smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c, 4854 u9=\E[c, use=emx-base, 4855# nice colors for Emacs (white on blue, mode line white on cyan) 4856ansi-color-2-emx|ANSI.SYS color 2, 4857 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m, 4858 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec, 4859 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m, 4860 smul=\E[1;36;44m, use=ansi-emx, 4861# nice colors for Emacs (white on black, mode line black on cyan) 4862ansi-color-3-emx|ANSI.SYS color 3, 4863 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m, 4864 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec, 4865 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m, 4866 smul=\E[0;36;40m, use=ansi-emx, 4867mono-emx|stupid monochrome ansi terminal with only one kind of emphasis, 4868 am, 4869 cols#80, it#8, lines#24, 4870 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 4871 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 4872 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, 4873 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, 4874 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, 4875 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m, 4876 sgr0=\E[0m, 4877 4878# Use this for cygwin32 (tested with beta 19.1) 4879# underline is colored bright magenta 4880# shifted kf1-kf12 are kf11-kf22 4881cygwinB19|ansi emulation for cygwin32, 4882 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 4883 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, 4884 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 4885 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 4886 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, 4887 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4888 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@, 4889 use=ansi.sys, 4890 4891# Use this for cygwin (tested with version 1.1.0). 4892# I've combined pcansi and linux. Some values of course were different and 4893# I've indicated which of these were and which I used. 4894# Cheers, earnie_boyd@yahoo.com 4895# several changes based on running with tack and comparing with older entry -TD 4896# more changes from csw: 4897# add cbt [backtab] 4898# remove eo [erase overstrike with blank] 4899# change clear was \E[H\E[J now \E[2J (faster?) 4900# remove cols 4901# remove lines 4902# remove ncv#3 [colors collide with highlights, bitmask] not applicable 4903# to MSDOS box? 4904# add cub [cursor back param] 4905# add cuf [cursor forward param] 4906# add cuu [cursor up param] 4907# add cud [cursor down param] 4908# add hs [has status line] 4909# add fsl [return from status line] 4910# add tsl [go to status line] 4911# add smacs [Start alt charset] (not sure if this works) 4912# add rmacs [End alt charset] (ditto) 4913# add smcup [enter_ca_mode] (save console; thanks Corinna) 4914# add rmcup [exit_ca_mode] (restore console; thanks Corinna) 4915# add kb2 [center of keypad] 4916# add u8 [user string 8] \E[?6c 4917# add el [clear to end of line] \E[K 4918# Notes: 4919# cnorm [make cursor normal] not implemented 4920# flash [flash] not implemented 4921# blink [blink] not implemented very usefully in cygwin? \E[5m 4922# dim [dim] not implemented very usefully in cygwin? \E[2m 4923# cub1 [cursor back 1] typically \E[D, but ^H is faster? 4924# kNXT [shifted next key] not implemented 4925# kPRV [shifted prev key] not implemented 4926# khome [home key] really is \E[1~ NOT \E[H 4927# tbc [clear tab stops] not implemented 4928# xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni 4929# smpch [Start PC charset] is \E[11m, same as smacs 4930# rmpch [End PC charset] is \E[10m, same as rmacs 4931# mir [move in insert mode] fails in tack? 4932# bce [back color erase] causes problems with change background color? 4933# cvvis [make cursor very visible] causes a stackdump when testing with 4934# testcurs using the output option? \E[?25h\E[?8c 4935# civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c 4936# ech [erase characters param] broken \E[%p1%dX 4937# kcbt [back-tab key] not implemented in cygwin? \E[Z 4938# 4939# 2005/11/12 -TD 4940# Remove cbt since it does not work in current cygwin 4941# Add 'mir' and 'in' flags based on tack 4942cygwin|ansi emulation for Cygwin, 4943 am, hs, mir, msgr, xon, 4944 colors#8, it#8, pairs#64, 4945 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 4946 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, 4947 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 4948 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 4949 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 4950 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H, 4951 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 4952 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G, 4953 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 4954 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, 4955 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 4956 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 4957 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, 4958 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4959 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, 4960 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, 4961 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, 4962 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, 4963 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4964 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 4965 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h, 4966 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];, 4967 vpa=\E[%i%p1%dd, use=vt102+enq, 4968 4969# I've supplied this so that you can help test new values and add other 4970# features. Cheers, earnie_boyd@yahoo.com. 4971# 4972# Some features are from pcansi. The op value is from linux. Function-keys 4973# are from linux. These have been tested not to cause problems. xenl was in 4974# this list, but DOES cause problems so it has been removed 4975cygwinDBG|Debug Version for Cygwin, 4976 am, eo, mir, msgr, xon, 4977 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64, 4978 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 4979 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 4980 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D, 4981 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 4982 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4983 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 4984 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 4985 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG, 4986 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 4987 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$, 4988 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 4989 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, 4990 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 4991 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 4992 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, 4993 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 4994 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 4995 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m, 4996 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l, 4997 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7, 4998 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4999 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 5000 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m, 5001 smul=\E[4m, tbc=\E[2g, vpa=\E[%i%p1%dd, use=vt102+enq, 5002 5003# Key definitions: 5004# The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the 5005# encodings used by other x86 environments. All others are invented for DJGPP. 5006# Oddly enough, while several combinations of modifiers are tabulated, there is 5007# none for shifted cursor keys. 5008# 5009# F1 \E[[A 5010# F2 \E[[B 5011# F3 \E[[C 5012# F4 \E[[D 5013# F5 \E[[E 5014# F6 \E[17~ 5015# F7 \E[18~ 5016# F8 \E[19~ 5017# F9 \E[20~ 5018# F10 \E[21~ 5019# F11 \E[23~ 5020# F12 \E[24~ 5021# 5022# Delete \E[3~ 5023# Down Arrow \E[B 5024# End \E[4~ 5025# Home \E[1~ 5026# Insert \E[2~ 5027# Left Arrow \E[D 5028# Page Down \E[6~ 5029# Page Up \E[5~ 5030# Right Arrow \E[C 5031# Up Arrow \E[A 5032# 5033# Shift-F1 \E[25~ 5034# Shift-F2 \E[26~ 5035# Shift-F3 \E[27~ 5036# Shift-F4 \E[28~ 5037# Shift-F5 \E[29~ 5038# Shift-F6 \E[30~ 5039# Shift-F7 \E[31~ 5040# Shift-F8 \E[32~ 5041# Shift-F9 \E[33~ 5042# Shift-F10 \E[34~ 5043# Shift-F11 \E[35~ 5044# Shift-F12 \E[36~ 5045# 5046# Ctrl-F1 \E[47~ 5047# Ctrl-F2 \E[48~ 5048# Ctrl-F3 \E[49~ 5049# Ctrl-F4 \E[50~ 5050# Ctrl-F5 \E[51~ 5051# Ctrl-F6 \E[52~ 5052# Ctrl-F7 \E[53~ 5053# Ctrl-F8 \E[54~ 5054# Ctrl-F9 \E[55~ 5055# Ctrl-F10 \E[56~ 5056# Ctrl-F11 \E[57~ 5057# Ctrl-F12 \E[58~ 5058# 5059# Ctrl-Delete \E[43~ 5060# Ctrl-Down Arrow \E[38~ 5061# Ctrl-End \E[44~ 5062# Ctrl-Home \E[41~ 5063# Ctrl-Insert \E[42~ 5064# Ctrl-Left Arrow \E[39~ 5065# Ctrl-Page Down \E[46~ 5066# Ctrl-Page Up \E[45~ 5067# Ctrl-Right Arrow \E[40~ 5068# Ctrl-Up Arrow \E[37~ 5069# 5070# Alt-F1 \E[59~ 5071# Alt-F2 \E[60~ 5072# Alt-F3 \E[61~ 5073# Alt-F4 \E[62~ 5074# Alt-F5 \E[63~ 5075# Alt-F6 \E[64~ 5076# Alt-F7 \E[65~ 5077# Alt-F8 \E[66~ 5078# Alt-F9 \E[67~ 5079# Alt-F10 \E[68~ 5080# Alt-F11 \E[79~ 5081# Alt-F12 \E[80~ 5082# 5083# Alt-Delete \E[65~ 5084# Alt-Down Arrow \E[60~ 5085# Alt-End \E[66~ 5086# Alt-Home \E[41~ 5087# Alt-Insert \E[64~ 5088# Alt-Left Arrow \E[61~ 5089# Alt-Page Down \E[68~ 5090# Alt-Page Up \E[67~ 5091# Alt-Right Arrow \E[62~ 5092# Alt-Up Arrow \E[59~ 5093# 5094# Also: 5095# Alt-A \E[82~ 5096# Alt-B \E[82~ 5097# Alt-C \E[83~ 5098# Alt-D \E[84~ 5099# Alt-E \E[85~ 5100# Alt-F \E[86~ 5101# Alt-G \E[87~ 5102# Alt-H \E[88~ 5103# Alt-I \E[89~ 5104# Alt-J \E[90~ 5105# Alt-K \E[91~ 5106# Alt-L \E[92~ 5107# Alt-M \E[93~ 5108# Alt-N \E[94~ 5109# Alt-O \E[95~ 5110# Alt-P \E[96~ 5111# Alt-Q \E[97~ 5112# Alt-R \E[98~ 5113# Alt-S \E[99~ 5114# Alt-T \E[100~ 5115# Alt-U \E[101~ 5116# Alt-V \E[102~ 5117# Alt-W \E[103~ 5118# Alt-X \E[104~ 5119# Alt-Y \E[105~ 5120# Alt-Z \E[106~ 5121djgpp|ansi emulation for DJGPP alpha, 5122 am, bce, msgr, xhp, xon, xt, 5123 colors#8, it#8, pairs#64, 5124 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 5125 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, 5126 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H, 5127 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 5128 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5129 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 5130 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 5131 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, 5132 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 5133 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D, 5134 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 5135 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, 5136 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, 5137 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 5138 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J, 5139 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, 5140 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5141 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m, 5142 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, 5143 5144djgpp203|Entry for DJGPP 2.03, 5145 OTbs, am, 5146 cols#80, it#8, lines#25, 5147 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, 5148 kcud1=^J, nel=^M^J, 5149 5150djgpp204|Entry for DJGPP 2.04, 5151 OTbs, am, AX, 5152 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64, 5153 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, 5154 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, 5155 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 5156 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 5157 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, 5158 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 5159 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 5160 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H, 5161 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5162 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B, 5163 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 5164 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 5165 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m, 5166 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm, 5167 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 5168 5169# This is tested using U/Win's telnet. Scrolling is omitted because it is 5170# buggy. Another odd bug appears when displaying "~" in alternate character 5171# set (the emulator spits out error messages). Compare with att6386 -TD 5172uwin|U/Win 3.2 console, 5173 am, eo, in, msgr, xenl, xon, 5174 colors#8, it#8, ncv#58, pairs#64, 5175 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 5176 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 5177 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J, 5178 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 5179 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX, 5180 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, 5181 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B, 5182 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP, 5183 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR, 5184 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, 5185 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8, 5186 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m, 5187 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7, 5188 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, 5189 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m, 5190 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, 5191 5192# This entry fits the Windows NT console when the _POSIX_TERM environment 5193# variable is set to 'on'. While the Windows NT POSIX console is seldom used, 5194# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP 5195# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating 5196# systems is not, and (surprise!) they match very well. 5197# 5198# See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up 5199# VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only 5200# are the installation instructions a pile of mind-numbing bureaucratese, 5201# but the termcap entry is actually broken and unusable as given; the :do: 5202# capability is misspelled "d". 5203# 5204# To use this, you need to a bunch of environment variables: 5205# 5206# SET _POSIX_TERM=on 5207# SET TERM=ansi 5208# SET TERMCAP=location of termcap file in POSIX file format 5209# which is case-sensitive. 5210# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap 5211# SET TMP=//C/TEMP 5212# 5213# Important note: setting the TMP environment variable in POSIX style renders 5214# it incompatible with a lot of other applications, including Visual C++. So 5215# you should have a separate command window just for vi. All the other 5216# variables may be permanently set in the Control Panel\System applet. 5217# 5218# You can find out more about the restrictions of this facility at 5219# <http://www.nentug.org/unix-to-nt/ntposix.htm>. 5220# 5221# From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997 5222ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode, 5223 am, bw, msgr, 5224 cols#80, it#8, lines#25, 5225 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 5226 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 5227 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V, 5228 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m, 5229 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m, 5230# From: jew@venus.sunquest.com 5231# Date: 19 Feb 93 23:41:07 GMT 5232# Here's a combination of ansi and vt100 termcap 5233# entries that works nearly perfectly for me 5234# (Gateway 2000 Handbook and Microsoft Works 3.0): 5235pcmw|PC running Microsoft Works, 5236 am, xenl, 5237 cols#80, it#8, lines#24, vt#3, 5238 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 5239 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, 5240 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, 5241 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, 5242 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, 5243 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 5244 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>, 5245 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/lib/tabset/vt100, 5246 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, 5247 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 5248 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>, 5249 tbc=\E[3g$<2/>, 5250 5251# From: Federico Bianchi 5252# This is the entry for the OpenNT terminal. 5253# The ntconsole name is for backward compatability. 5254# This is for OpenNT 2.0 and later. 5255# Later OpenNT was renamed to Interix. 5256# 5257# Presently it is distributed by Microsoft as Services For Unix (SFU). 5258# The 3.5 beta contains ncurses 4.2 (that is header files and executables, 5259# the documentation dates from 1.9.9e) -TD 5260 5261interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color, 5262 am, bw, msgr, 5263 colors#8, cols#80, lines#25, ncv#3, pairs#64, 5264 acsc=`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~q\304r\362s_t\303u\264v\301w\302x\263y\371z\372{\373|\374}\375~\376.\031-\030\,\021+^P0\333p\304r\304y\363z\362{\343|\330}\234, 5265 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD, 5266 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, 5267 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 5268 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 5269 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 5270 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 5271 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA, 5272 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD, 5273 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI, 5274 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM, 5275 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR, 5276 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV, 5277 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa, 5278 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe, 5279 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj, 5280 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5, 5281 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt, 5282 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy, 5283 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-, 5284 kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9, 5285 kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J, 5286 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, 5287 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec, 5288 sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5289 setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm, 5290 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[1m, smul=\E[4m, 5291 5292opennt-35|ntconsole-35|OpenNT-term35 compatible with color, 5293 lines#35, use=opennt, 5294 5295opennt-50|ntconsole-50|OpenNT-term50 compatible with color, 5296 lines#50, use=opennt, 5297 5298opennt-60|ntconsole-60|OpenNT-term60 compatible with color, 5299 lines#60, use=opennt, 5300 5301opennt-100|ntconsole-100|OpenNT-term100 compatible with color, 5302 lines#100, use=opennt, 5303 5304# OpenNT wide terminals 5305opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color, 5306 cols#125, use=opennt, 5307 5308opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color, 5309 lines#35, use=opennt-w, 5310 5311opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color, 5312 lines#50, use=opennt-w, 5313 5314opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color, 5315 lines#60, use=opennt-w, 5316 5317opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color, 5318 cols#132, use=opennt, 5319 5320# OpenNT terminals with no smcup/rmcup (names match termcap entries) 5321interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color, 5322 rmcup@, smcup@, use=opennt, 5323 5324opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color, 5325 lines#35, use=opennt-nti, 5326 5327opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color, 5328 lines#50, use=opennt-nti, 5329 5330opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color, 5331 lines#60, use=opennt-nti, 5332 5333opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color, 5334 lines#100, use=opennt-nti, 5335 5336######## COMMON TERMINAL TYPES 5337# 5338# This section describes terminal classes and maker brands that are still 5339# quite common, but have proprietary command sets not blessed by ANSI. 5340# 5341 5342#### Altos 5343# 5344# Altos made a moderately successful line of UNIX boxes. In 1990 they were 5345# bought out by Acer, a major Taiwanese manufacturer of PC-clones. 5346# Acer has a web site at http://www.acer.com. 5347# 5348# Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993 5349# His comments suggest they were shipped with the system. 5350# 5351 5352# (altos2: had extension capabilities 5353# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ 5354# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ 5355# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ 5356# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: 5357# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ 5358# :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\ 5359# :HL=^AP\r:SP=\E[i:\ 5360# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\ 5361# :LO=\E[0q:LC=\E[5q:LL=\E[6q:\ 5362# Comparison with the k* capabilities makes it obvious that the c* things are 5363# shift keys. I have renamed them to keys 32 and up accordingly. Also, 5364# :sr: was given as a boolean-- esr) 5365altos2|alt2|altos-2|altos II, 5366 cols#80, it#8, lines#24, xmc#0, 5367 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C, 5368 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M, 5369 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, 5370 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J, 5371 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r, 5372 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D, 5373 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r, 5374 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, 5375 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, 5376 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, 5377 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 5378 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r, 5379 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 5380 smam=\E[?7h, smso=\E[7m, smul=\E[4m, 5381# (altos3: had extension capabilities 5382# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ 5383# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ 5384# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ 5385# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: 5386# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ 5387# :HL=^AP\r:SP=\E[i:\ 5388# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\ 5389altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V, 5390 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2, 5391altos4|alt4|altos-4|altos IV, 5392 use=wy50, 5393# (altos7: had extension capabilities: 5394# :GG#0:GI=\EH8:GF=\EH7:\ 5395# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ 5396# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ 5397# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ 5398# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: 5399# Comparison with the k* capabilities makes it obvious that the c* things are 5400# shift keys. I have renamed them to keys 32 and up accordingly. I have 5401# also made this entry relative to adm12 in order to give it an <sgr>. The 5402# <invis> imported by use=adm+sgr may work, let me know. -- esr) 5403altos7|alt7|altos VII, 5404 am, mir, 5405 cols#80, lines#24, xmc#0, 5406 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt, 5407 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 5408 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 5409 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE, 5410 ind=^J, invis=\EG1, 5411 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r, 5412 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H, 5413 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r, 5414 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, 5415 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, 5416 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, 5417 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 5418 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r, 5419 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej, 5420 rmir=\Er, smir=\Eq, use=adm+sgr, 5421altos7pc|alt7pc|altos PC VII, 5422 kend=\ET, use=altos7, 5423 5424#### Hewlett-Packard (hp) 5425# 5426# Hewlett-Packard 5427# 8000 Foothills Blvd 5428# Roseville, CA 95747 5429# Vox: 1-(916)-785-4363 (Technical response line for VDTs) 5430# 1-(800)-633-3600 (General customer support) 5431# 5432# 5433# As of March 1998, HP no longer has any terminals in production. 5434# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being 5435# supported (they still have parts). So are the 2392a and 2394a. 5436# See the WORKSTATION CONSOLES section for the 700s. 5437# 5438 5439# Generic HP terminal - this should (hopefully) work on any HP terminal. 5440hpgeneric|hp|hewlett-packard generic terminal, 5441 OTbs, OTpt, am, da, db, mir, xhp, 5442 cols#80, lines#24, lm#0, vt#6, 5443 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 5444 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM, 5445 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, 5446 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@, 5447 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3, 5448 vpa=\E&a%p1%dY, 5449 5450hp110|hewlett-packard model 110 portable, 5451 lines#16, use=hpgeneric, 5452 5453hp+pfk+cr|hp function keys with CR, 5454 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, 5455 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, 5456 5457hp+pfk-cr|hp function keys w/o CR, 5458 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, 5459 kf8=\Ew, 5460 5461# The hp2621s use the same keys for the arrows and function keys, 5462# but not separate escape sequences. These definitions allow the 5463# user to use those keys as arrow keys rather than as function 5464# keys. 5465hp+pfk+arrows|hp alternate arrow definitions, 5466 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@, 5467 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r, 5468 kll=\Eq\r, kri=\Es\r, 5469 5470hp+arrows|hp arrow definitions, 5471 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 5472 kind=\ES, kll=\EF, kri=\ET, 5473 5474# Generic stuff from the HP 262x series 5475# 5476hp262x|HP 262x terminals, 5477 xhp, 5478 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES, 5479 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 5480 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, 5481 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET, 5482 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, 5483 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c, 5484 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, 5485 5486# Note: no <home> on HPs since that homes to top of memory, not screen. 5487# Due to severe 2621 braindamage, the only way to get the arrow keys to 5488# transmit anything at all is to turn on the function key labels 5489# with <smkx>, and even then the user has to hold down shift! 5490# The default 2621 turns off the labels except when it has to to 5491# enable the function keys. If your installation prefers labels 5492# on all the time, or off all the time (at the "expense" of the 5493# function keys), use 2621-nl or 2621-wl. 5494# 5495# Note: there are newer ROMs for 2621's that allow you to set 5496# strap A so the regular arrow keys xmit \EA, etc, as with the 5497# 2645. However, even with this strap set, the terminal stops 5498# xmitting if you reset it, until you unset and reset the strap! 5499# Since there is no way to set/unset the strap with an escape 5500# sequence, we don't use it in the default. 5501# If you like, you can use 2621-ba (brain-damaged arrow keys). 5502hp2621-ba|2621 w/new rom and strap A set, 5503 rmkx@, smkx@, use=hp+arrows, use=hp2621, 5504 5505# hp2621 with function labels. Most of the time they are off, 5506# but inside vi, the function key labels appear. You have to 5507# hold down shift to get them to xmit. 5508hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels, 5509 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl, 5510hp2621-fl|hp 2621, 5511 xhp@, xon, 5512 pb#19200, 5513 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>, 5514 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@, 5515 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD, 5516 use=hp+pfk+cr, use=hpgeneric, 5517 5518# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p 5519hp2621p|hp 2621 with printer, 5520 mc4=\E&p13C, mc5=\E&p11C, use=hp2621, 5521 5522hp2621p-a|hp2621p with fn as arrows, 5523 use=hp+pfk+arrows, use=hp2621p, 5524 5525# hp2621 with k45 keyboard 5526hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard, 5527 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 5528 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621, 5529 5530# 2621 using all 48 lines of memory, only 24 visible at any time. 5531hp2621-48|48 line 2621, 5532 lines#48, 5533 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR, 5534 use=hp2621, 5535 5536# 2621 with no labels ever. Also prevents vi delays on escape. 5537hp2621-nl|hp 2621 with no labels, 5538 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@, 5539 use=hp2621-fl, 5540 5541# Needed for UCB ARPAVAX console, since lsi-11 expands tabs 5542# (wrong). 5543# 5544hp2621-nt|hp 2621 w/no tabs, 5545 ht@, use=hp2621, 5546 5547# Hp 2624 B with 4 or 10 pages of memory. 5548# 5549# Some assumptions are made with this entry. These settings are 5550# NOT set up by the initialization strings. 5551# 5552# Port Configuration 5553# RecvPace=Xon/Xoff 5554# XmitPace=Xon/Xoff 5555# StripNulDel=Yes 5556# 5557# Terminal Configuration 5558# InhHndShk=Yes 5559# InhDC2=Yes 5560# XmitFnctn(A)=No 5561# InhEolWrp=No 5562# 5563# Note: the 2624 DOES have a true <home>, believe it or not! 5564# 5565# The 2624 has an "error line" to which messages can be sent. 5566# This is CLOSE to what is expected for a "status line". However, 5567# after a message is sent to the "error line", the next carriage 5568# return is EATEN and the "error line" is turned back off again! 5569# So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>. 5570# 5571# This entry supports emacs (and any other program that uses raw 5572# mode) at 4800 baud and less. I couldn't get the padding right 5573# for 9600. 5574# 5575# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr) 5576hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B, 5577 da, db, 5578 lm#96, 5579 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, 5580 use=hp+labels, use=scrhp, 5581 5582# This hp2626 entry does not use any of the fancy windowing stuff 5583# of the 2626. 5584# 5585# Indeed, terminfo does not yet handle such stuff. Since changing 5586# any window clears memory, it is probably not possible to use 5587# this for screen opt. 5588# 5589# ed is incredibly slow most of the time - I am guessing at the 5590# exact padding. Since the terminal uses xoff/xon this is intended 5591# only for cost computation, so that the terminal will prefer el 5592# or even dl1 which is probably faster! 5593# 5594# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only 5595# extra slow on the last line of the window. 5596# 5597# The padding probably should be changed. 5598# 5599hp2626|hp2626a|hp2626p|hp 2626, 5600 da, db, 5601 lm#0, pb#19200, 5602 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>, 5603 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr, 5604 use=hp+labels, use=scrhp, 5605 5606# This entry is for sysline. It allocates a 23 line window with 5607# a 115 line workspace for regular use, and a 1 line window for 5608# the status line. 5609# 5610# This assumes port 2 is being used. 5611# Turn off horizontal line, Create ws #1 with 115 lines, 5612# Create ws #2 with 1 line, Create window #1 lines 1-23, 5613# Create window #2 lines 24-24, Attach cursor to workspace #1. 5614# Note that this clears the tabs so it must be done by tset before 5615# it sets the tabs. 5616# 5617hp2626-s|hp 2626 using only 23 lines, 5618 eslok, hs, 5619 lines#23, 5620 fsl=\E&d@\E&w7f2p1I\E&w4f1I, 5621 is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r, 5622 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626, 5623# Force terminal back to 24 lines after being 23. 5624hp2626-ns|hp 2626 using all 24 lines, 5625 is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r, 5626 use=hp2626, 5627# Various entries useful for small windows on 2626. 5628hp2626-12|hewlett-packard 2626 12 lines, 5629 lines#12, use=hp2626, 5630hp2626-12x40|hewlett-packard 2626 12 lines 40 columns, 5631 cols#40, lines#12, use=hp2626, 5632hp2626-x40|hewlett-packard 2626 40 columns, 5633 cols#40, use=hp2626, 5634hp2626-12-s|hewlett-packard 2626 11 lines plus status, 5635 lines#11, use=hp2626-s, 5636 5637# 5638# hp2627 color tubes from University of Wisconsin 5639# 5640hp2627a-rev|hp 2627 with reverse video colors, 5641 cr=^M, cud1=^J, ht=^I, ind=^J, 5642 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r, 5643 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@, 5644 smul=\E&dD\E&v1S, use=hp2621-nl, 5645hp2627a|hp 2627 color terminal with no labels, 5646 cr=^M, cud1=^J, ht=^I, ind=^J, 5647 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r, 5648 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S, 5649 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S, 5650 use=hp2621-nl, 5651hp2627c|hp 2627 color (cyan) terminal with no labels, 5652 cr=^M, cud1=^J, ht=^I, ind=^J, 5653 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r, 5654 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a, 5655 5656# hp2640a doesn't have the Y cursor addressing feature, and C is 5657# memory relative instead of screen relative, as we need. 5658# 5659hp2640a|hp 2640a, 5660 cup@, rmkx@, smkx@, use=hp2645, 5661 5662hp2640b|hp2644a|hp 264x series, 5663 rmkx@, smkx@, use=hp2645, 5664 5665# (hp2641a: removed unknown :gu: -- esr) 5666hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry, 5667 am, da, db, mir, xhp, 5668 cols#80, lines#24, 5669 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 5670 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, 5671 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I, 5672 if=/usr/share/tabset/std, il1=\EL, ind=^J, 5673 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 5674 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, 5675 vpa=\E&a%p1%2dY, 5676 5677# This terminal should be used at 4800 baud or less. It needs padding for 5678# plain characters at 9600, I guessed at an appropriate cr delay. It really 5679# wants ^E/^F handshaking, but that doesn't work well even if you write 5680# software to support it. 5681hp2645|hp45|HP 2645 series, 5682 pb#9600, 5683 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED, 5684 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 5685 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, 5686 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB, 5687 rmkx=\E&s0A, 5688 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c, 5689 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric, 5690# You should use this terminal at 4800 baud or less. 5691hp2648|hp2648a|HP 2648a graphics terminal, 5692 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>, 5693 dch1=\EP$<7>, ip=$<5>, use=hp2645, 5694 5695# The HP 150 terminal is a fairly vanilla HP terminal, with the 5696# clreol standout problem. It also has graphics capabilities and 5697# a touch screen, which we don't describe here. 5698hp150|hewlett packard Model 150, 5699 OTbs, use=hp2622, 5700 5701# HP 2382a terminals, "the little ones." They don't have any 5702# alternate character set support and sending out ^N/^O will 5703# leave the screen blank. 5704hp2382a|hp2382|hewlett packard 2382a, 5705 da, db, 5706 lh#1, lm#48, 5707 acsc@, 5708 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s, 5709 rmacs@, 5710 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c, 5711 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp, 5712 5713hp2621-a|hp2621a-a|hp2621 with fn as arrows, 5714 use=hp+pfk+arrows, use=hp2621-fl, 5715 5716# newer hewlett packard terminals 5717 5718newhpkeyboard|generic entry for HP extended keyboard, 5719 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 5720 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, 5721 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV, 5722 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A, 5723 use=hp+pfk-cr, 5724 5725newhp|generic entry for new hewlett packard terminals, 5726 am, bw, mir, xhp, xon, 5727 cols#80, lines#24, pb#4800, 5728 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x., 5729 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H, 5730 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH, 5731 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J, 5732 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J, 5733 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s, 5734 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s, 5735 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET, 5736 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg, 5737 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;, 5738 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD, 5739 tbc=\E3, use=newhpkeyboard, 5740 5741memhp|memory relative addressing for new HP ttys, 5742 vt#6, 5743 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR, 5744 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR, 5745 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r, 5746 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp, 5747 5748scrhp|screen relative addressing for new HP ttys, 5749 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC, 5750 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC, 5751 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR, 5752 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA, 5753 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp, 5754 5755# (hp+labels: added label values from a BRL termcap -- esr) 5756hp+labels|"standard" label info for new HP ttys, 5757 lh#2, lw#8, nlab#8, 5758 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, 5759 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s, 5760 rmln=\E&j@, smln=\E&jB, 5761 5762hp+printer|"standard" printer info for HP ttys, 5763 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C, 5764 5765 5766# The new hp2621b is kind of a cross between the old 2621 and the 5767# new 262x series of machines. It has dip-switched options. 5768# The firmware has a bug in it such that if you give it a null 5769# length label, the following character is eaten! 5770hp2621b|hp 2621b with old style keyboard, 5771 lh#1, lm#48, lw#8, nlab#8, 5772 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 5773 kind=\ET, kll=\EF, kri=\ES, 5774 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r, 5775 smln=\E&jB, use=hp2621, 5776 5777hp2621b-p|hp 2621b with printer, 5778 use=hp+printer, use=hp2621b, 5779 5780# hp2621b - new 2621b with new extended keyboard 5781# these are closer to the new 26xx series than the other 2621b 5782hp2621b-kx|hp 2621b with extended keyboard, 5783 use=newhpkeyboard, use=hp2621b, 5784 5785hp2621b-kx-p|hp 2621b with new keyboard & printer, 5786 use=hp+printer, use=hp2621b-kx, 5787 5788# Some assumptions are made in the following entries. 5789# These settings are NOT set up by the initialization strings. 5790# 5791# Port Configuration 5792# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes 5793# 5794# Terminal Configuration 5795# InhHndShk(G)=Yes InhDC2(H)=Yes 5796# XmitFnctn(A)=No InhEolWrp=No 5797# 5798# 5799# Hp 2622a & hp2623a display and graphics terminals 5800# 5801hp2622|hp2622a|hp 2622, 5802 da, db, 5803 lm#0, pb#19200, 5804 is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp, 5805 5806# The 2623 is a 2622 with extra graphics hardware. 5807hp2623|hp2623a|hp 2623, 5808 use=hp2622, 5809 5810hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer, 5811 use=hp+printer, use=hp2624, 5812 5813# The hewlett packard B can have an optional extra 6 pages of memory. 5814hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory, 5815 lm#240, use=hp2624, 5816 5817hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer, 5818 lm#240, use=hp2624b-p, 5819 5820# Color manipulations for HP terminals 5821hp+color|hp with colors, 5822 ccc, 5823 colors#16, ncv#17, pairs#7, 5824 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI, 5825 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I, 5826 op=\E&v0S, scp=\E&v%p1%dS, 5827 5828# <is2> sets the screen to be 80 columns wide 5829hp2397a|hp2397|hewlett packard 2397A color terminal, 5830 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color, 5831 5832# HP 700/44 Setup parameters: 5833# Terminal Mode HP-PCterm 5834# Inhibit Auto Wrap NO 5835# Status Line Host Writable 5836# PC Character Set YES 5837# Twenty-Five Line Mode YES 5838# XON/XOFF @128 or 64 (sc) 5839# Keycode Mode NO or YES (sc) 5840# Backspace Key BS or BS/DEL 5841# 5842# <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key; 5843# \E\\? does not turn off keycode mode 5844# <smsc> sets alternate start/stop; keycode on 5845hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode, 5846 am, eo, xenl, xon, 5847 cols#80, lines#25, 5848 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 5849 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H, 5850 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 5851 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 5852 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, 5853 ind=^J, 5854 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\, 5855 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 5856 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~, 5857 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, 5858 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~, 5859 kpp=\E[5~, rmam=\E[?7l, 5860 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m, 5861 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, 5862 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m, 5863 smul=\E[4m, xoffc=g, xonc=e, 5864# 5865# (hp2392: copied <rmir> here from hpex -- esr) 5866hp2392|239x series, 5867 cols#80, 5868 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r, 5869 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, 5870 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV, 5871 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY, 5872 use=hpsub, 5873 5874hpsub|hp terminals -- capability subset, 5875 am, da, db, mir, xhp, xon, 5876 lines#24, 5877 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 5878 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, 5879 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, 5880 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB, 5881 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@, 5882 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, 5883 5884# hpex: 5885# May be used for most 24 x 80 hp terminals, 5886# but has no padding added, so may allow runover in some terminals at high 5887# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and 5888# hp98x5 terminal emulators or hp98x6 consoles. 5889# Adds xy-cursor addressing, vertical cursor addressing, home, 5890# last line, and underline capabilities. 5891# 5892# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:", 5893# moved <rmir> here from hpsub -- esr) 5894hpex|hp extended capabilites, 5895 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H, 5896 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ, 5897 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub, 5898 5899# From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996 5900hp2|hpex2|hewlett-packard extended capabilities newer version, 5901 am, da, db, mir, xhp, 5902 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0, 5903 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, 5904 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, 5905 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 5906 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, 5907 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 5908 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, 5909 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, 5910 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, 5911 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em, 5912 pfkey=\E&f%p1%dk%p2%l%dL%p2%s, 5913 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, 5914 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, 5915 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A, 5916 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, 5917 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, 5918 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB, 5919 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 5920 5921# HP 236 console 5922# From: <ddavis@ic.berkeley.edu> 5923hp236|hp236 internal terminal emulator, 5924 OTbs, am, 5925 cols#80, lines#24, 5926 clear=\EF, cnorm=\EDE, cub1=^H, 5927 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB, 5928 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI, 5929 sgr0=\ECI, smso=\EBI, 5930 5931# This works on a hp300 console running Utah 4.3 BSD 5932# From: Craig Leres <leres@okeeffe.berkeley.edu> 5933hp300h|HP Catseye console, 5934 OTbs, am, da, db, mir, xhp, 5935 cols#128, lines#51, lm#0, xmc#0, 5936 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, 5937 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, 5938 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, 5939 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H, 5940 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 5941 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, 5942 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3, 5943 vpa=\E&a%p1%dY, 5944# From: Greg Couch <gregc@ernie.berkeley.edu> 5945hp9837|hp98720|hp98721|HP 9000/300 workstations, 5946 OTbs, am, da, db, mir, xhp, 5947 cols#128, it#8, lines#46, lm#0, 5948 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB, 5949 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, 5950 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 5951 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED, 5952 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 5953 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU, 5954 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@, 5955 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD, 5956 tbc=\E3, vpa=\E&a%p1%dY, 5957# HP 9845 desktop computer from BRL 5958# (hp9845: removed unknown capability :gu: -- esr) 5959hp9845|HP 9845, 5960 OTbs, am, da, db, eo, mir, xhp, 5961 cols#80, lines#21, 5962 OTbc=\ED, clear=\EH\EJ, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY, 5963 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, 5964 if=/usr/share/tabset/std, il1=\EL, rmir=\ER, rmso=\E&d@, 5965 smir=\EQ, smso=\E&dB, 5966# From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90 5967# (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>; 5968# added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr) 5969hp98550|hp98550a|HP 9000 Series 300 color console, 5970 OTbs, am, da, db, mir, xhp, 5971 cols#128, it#8, lines#49, lm#0, 5972 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR, 5973 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 5974 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH, 5975 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 5976 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds, 5977 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 5978 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, 5979 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, 5980 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, 5981 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ, 5982 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, 5983 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ, 5984 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 5985# From: Victor Duchovni <vic@fine.princeton.edu> 5986# (hp700-wy: removed obsolete ":nl=^J:"; 5987# replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr) 5988hp700-wy|HP700/41 emulating wyse30, 5989 OTbs, am, bw, mir, msgr, 5990 cols#80, it#8, lines#24, xmc#1, 5991 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L, 5992 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 5993 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1, 5994 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>, 5995 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI, 5996 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY, 5997 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K, 5998 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>, 5999 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>, 6000 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c, 6001hp70092|hp70092a|hp70092A|HP 700/92, 6002 am, da, db, xhp, 6003 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, 6004 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA, 6005 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, 6006 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, 6007 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I, 6008 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, 6009 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 6010 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, 6011 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, 6012 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, 6013 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER, 6014 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, 6015 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, 6016 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 6017 6018bobcat|sbobcat|HP 9000 model 300 console, 6019 am, da, db, mir, xhp, 6020 cols#128, it#8, lines#47, xmc#0, 6021 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 6022 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP, 6023 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I, 6024 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 6025 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER, 6026 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ, 6027 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>, 6028gator-t|HP 9000 model 237 emulating extra-tall AAA, 6029 lines#94, use=gator, 6030gator|HP 9000 model 237 emulating AAA, 6031 bw, km, mir, ul, 6032 cols#128, it#8, lines#47, 6033 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, 6034 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, 6035 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>, 6036 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, 6037 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>, 6038 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 6039 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m, 6040 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 6041gator-52|HP 9000 model 237 emulating VT52, 6042 cols#128, lines#47, use=vt52, 6043gator-52t|HP 9000 model 237 emulating extra-tall VT52, 6044 lines#94, use=gator-52, 6045 6046#### Honeywell-Bull 6047# 6048# From: Michael Haardt <michael@gandalf.moria> 11 Jan 93 6049# 6050 6051# Honeywell Bull terminal. Its cursor and function keys send single 6052# control characters and it has standout/underline glitch. Most programs 6053# do not like these features/bugs. Visual bell is realized by flashing the 6054# "keyboard locked" LED. 6055dku7003-dumb|Honeywell Bull DKU 7003 dumb mode, 6056 cols#80, lines#25, 6057 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X, 6058 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K, 6059 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y, 6060 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J, 6061dku7003|Honeywell Bull DKU 7003 all features described, 6062 msgr, 6063 xmc#1, 6064 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m, 6065 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 6066 use=dku7003-dumb, 6067 6068#### Lear-Siegler (adm) 6069# 6070# These guys are long since out of the terminals business, but 6071# in 1995 many current terminals still have an adm type as one of their 6072# emulations (usually their stupidest, and usually labeled adm3, though 6073# these `adm3' emulations normally have adm3a+ capabilities). 6074# 6075# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a 6076# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator') 6077# was being held to ground would trigger a send of the top line on the screen. 6078# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22 6079# hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>, 6080# for clearing up this point.) 6081 6082adm1a|adm1|lsi adm1a, 6083 am, 6084 cols#80, lines#24, 6085 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6086 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^, 6087 ind=^J, 6088adm2|lsi adm2, 6089 OTbs, am, 6090 cols#80, lines#24, 6091 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6092 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6093 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J, 6094 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 6095# (adm3: removed obsolete ":ma=^K^P:" -- esr) 6096adm3|lsi adm3, 6097 OTbs, am, 6098 cols#80, lines#24, 6099 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J, 6100# The following ADM-3A switch settings are assumed for normal operation: 6101# SPACE U/L_DISP CLR_SCRN 24_LINE 6102# CUR_CTL LC_EN AUTO_NL FDX 6103# Other switches may be set for operator convenience or communication 6104# requirements. I recommend 6105# DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF 6106# ETX_OFF EOT_OFF 6107# Most of these terminals required an option ROM to support lower case display. 6108# Open the case and look at the motherboard; if you see an open 24-pin DIP 6109# socket, you may be out of luck. 6110# 6111# (adm3a: some capabilities merged in from BRl entry -- esr) 6112adm3a|lsi adm3a, 6113 OTbs, am, 6114 cols#80, lines#24, 6115 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H, 6116 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 6117 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, 6118 kcuu1=^K, rs2=^N, 6119adm3a+|adm3a plus, 6120 kbs=^H, use=adm3a, 6121# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr) 6122adm5|lsi adm5, 6123 xmc#1, 6124 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^, 6125 rmso=\EG, smso=\EG, use=adm3a+, 6126# A lot of terminals other than adm11s use these. Wherever you see 6127# use=adm+sgr with some of its capabilities disabled, try the 6128# disabled ones. They may well work but not have been documented or 6129# expressed in the using entry. We'd like to cook up an <sgr> but the 6130# <rmacs>/<smacs> sequences of the using entries vary too much. 6131adm+sgr|adm style highlight capabilities, 6132 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0, 6133 smso=\EG4, smul=\EG8, 6134# LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL 6135# Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs> 6136# <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also 6137# be ^Z, according to his entry. 6138# (adm11: <smul>=\EG4 was obviously erroneous because it also said 6139# <rev>=\EG4. Looking at other ADMs confirms this -- esr) 6140adm11|LSI ADM-11, 6141 OTbs, am, hs, 6142 OTkn#8, cols#80, lines#24, 6143 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H, 6144 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 6145 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I, 6146 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, 6147 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 6148 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E), 6149 use=adm+sgr, 6150# From: Andrew Scott Beals <bandy@lll-crg.ARPA> 6151# Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995 6152# Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996 6153# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had 6154# <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost> 6155# via BRL. That entry asserted <xmc#1>, but I've left that out because 6156# neither earlier nor later ADMSs have it -- esr) 6157# 6158# You will need to get into the supervisor setup before you can set 6159# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should 6160# see a lot more setup options. 6161# 6162# While in supervisor setup you can also use following codes: 6163# 6164# Ctrl-P Personality character selections (configure for example what 6165# arrow keys send, if I recall correctly) 6166# Ctrl-T tabs 1-80 use left&right to move and up to set and 6167# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor 6168# Ctrl-B Binary setup (probably not needed. I think that everything can 6169# be set using normal setup) 6170# Ctrl-A Answerback mode (enter answerback message) 6171# Ctrl-U User friendly mode (normal setup) 6172# Ctrl-D Defaults entire setup and function keys from EPROM tables 6173# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds. 6174# Ctrl-R Reads both setup and functions keys from NVM. 6175# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status 6176# 6177# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to 6178# RTS/CTS used nowadays with virtually every modem and computer. 19200 6179# bps works fine with hardware flow control. 6180# 6181# The following null-modem cable should fix this and enable you to use 6182# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also 6183# set ADM-12+ for DTR handshaking from supervisor setup. 6184# 6185# PC Serial ADM-12+ 6186# -------- ------- 6187# 2 - 3 6188# 3 - 2 6189# 4 - 5 6190# 5 - 20 6191# 6,8 - 4 6192# 7 - 7 6193# 20 - 6,8 6194# 6195adm12|lsi adm12, 6196 OTbs, OTpt, am, mir, 6197 OTug#1, cols#80, it#8, lines#24, 6198 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6199 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6200 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, 6201 is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1, 6202 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, 6203 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, 6204 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0, 6205 use=adm+sgr, 6206# (adm20: removed obsolete ":kn#7:" -- esr) 6207adm20|lear siegler adm20, 6208 OTbs, am, 6209 cols#80, it#8, lines#24, 6210 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L, 6211 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW, 6212 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE, 6213 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(, 6214 sgr0=\E(, smso=\E), 6215adm21|lear siegler adm21, 6216 xmc#1, 6217 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET, 6218 ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H, 6219 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr, 6220 use=adm3a, 6221# (adm22: ":em=:" was an obvious typo for ":ei=:"; also, 6222# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :"; 6223# removed bogus-looking \200 from before <cup>. -- esr) 6224adm22|lsi adm22, 6225 OTbs, am, 6226 cols#80, lines#24, 6227 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6228 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6229 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE, 6230 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0, 6231 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, 6232 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 6233 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, 6234 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E), 6235# ADM 31 DIP Switches 6236# 6237# This information comes from two versions of the manual for the 6238# Lear-Siegler ADM 31. 6239# 6240# Main board: 6241# rear of case 6242# +-||||-------------------------------------+ 6243# + S1S2 ||S + 6244# + ||3 + 6245# + + 6246# + ||S + 6247# + ||4 + 6248# + + 6249# + + 6250# + + 6251# + + 6252# + + 6253# +-+ +-+ 6254# + + 6255# + S5 S6 S7 + 6256# + == == == + 6257# +----------------------------------------------+ 6258# front of case (keyboard) 6259# 6260# S1 - Data Rate - Modem 6261# S2 - Data Rate - Printer 6262# ------------------------ 6263# Data Rate Setting 6264# ------------------- 6265# 50 0 0 0 0 6266# 75 1 0 0 0 6267# 110 0 1 0 0 6268# 134.5 1 1 0 0 6269# 150 0 0 1 0 6270# 300 1 0 1 0 6271# 600 0 1 1 0 6272# 1200 1 1 1 0 6273# 1800 0 0 0 1 6274# 2000 1 0 0 1 6275# 2400 0 1 0 1 6276# 3600 1 1 0 1 6277# 4800 0 0 1 1 6278# 7200 1 0 1 1 6279# 9600 0 1 1 1 6280# x 1 1 1 1 6281# 6282# S3 - Interface/Printer/Attributes 6283# --------------------------------- 6284# Printer Busy Control 6285# sw1 sw2 sw3 6286# --------------- 6287# off off off Busy not active, CD disabled 6288# off off on Busy not active, CD enabled 6289# off on off Busy active on J5-20, CD disabled 6290# on off off Busy active on J5-19, CD disabled - Factory Set. 6291# on off on Busy active on J5-19, CD enabled 6292# 6293# sw4 Used in conjuction with S4 for comm interface control - Fact 0 6294# 6295# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0 6296# 6297# sw6 ON enables printer BUSY active LOW - Factory Setting 6298# OFF enables printer BUSY active HIGH - If set to this, ADM31 senses 6299# 6300# sw7 ON - steady cursor - Factory Setting 6301# OFF - blinking cursor 6302# 6303# sw8 ON causes selected attribute character to be displayed 6304# OFF causes SPACE to be displayed instead - Factory Setting 6305# 6306# S4 - Interface 6307# -------------- 6308# Modem Interface 6309# S3 S4 S4 S4 S4 6310# sw4 sw1 sw2 sw3 sw4 6311# --------------------------- 6312# OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and 6313# Current Loop disabled - Factory Setting 6314# ON ON OFF ON OFF Enable Current Loop interface, Direct Connect 6315# disabled 6316# OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and 6317# Current Loop Disabled 6318# 6319# sw5 ON disables dot stretching mode - Factory Setting 6320# OFF enables dot stretching mode 6321# sw6 ON enables blanking function 6322# OFF enables underline function - Factory Setting 6323# sw7 ON causes NULLS to be displayed as NULLS 6324# OFF causes NULLS to be displayed as SPACES - Factory Setting 6325# 6326# S5 - Word Structure 6327# ------------------- 6328# sw1 ON enables BREAK key - Factory Setting 6329# OFF disables BREAK key 6330# sw2 ON selects 50Hz monitor refresh rate 6331# OFF selects 60Hz monitor refresh rate - Factory Setting 6332# 6333# Modem Port Selection 6334# sw3 sw4 sw5 6335# --------------- 6336# ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits 6337# OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits 6338# ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set. 6339# OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit 6340# ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits 6341# OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit 6342# ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit 6343# OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit 6344# 6345# sw6 ON sends bit 8 a 1 (mark) 6346# OFF sends bit 8 as 0 (space) - Factory Setting 6347# sw7 ON selects Block Mode 6348# OFF selects Conversation Mode - Factory Setting 6349# sw8 ON selects Full Duplex operation 6350# OFF selects Half Duplex operation - Factory Setting 6351# 6352# S6 - Printer 6353# ------------ 6354# sw1, sw2, sw6, sw7 Reserved - Factory 0 6355# 6356# Printer Port Selection 6357# same as Modem above, bit 8 (when 8 DATA bits) is always = 0 6358# 6359# sw8 ON enables Printer Port 6360# OFF disables Printer Port - Factory Setting 6361# 6362# S7 - Polling Address 6363# -------------------- 6364# sw1-7 Establish ASCII character which designates terminal polling address 6365# ON = logic 0 6366# OFF = logic 1 - Factory Setting 6367# sw8 ON enables Polling Option 6368# OFF disables Polling Option - Factory Setting 6369# 6370# 6371# On some older adm31s, S4 does not exist, and S5-sw6 is not defined. 6372# 6373# This adm31 entry uses underline as the standout mode. 6374# If the adm31 gives you trouble with standout mode, check the DIP switch in 6375# position 6, bank @c11, 25% from back end of the circuit board. Should be 6376# OFF. If there is no such switch, you have an old adm31 and must use oadm31. 6377# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr) 6378adm31|lsi adm31 with sw6 set for underline mode, 6379 OTbs, am, mir, 6380 cols#80, lines#24, 6381 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6382 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6383 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0, 6384 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, 6385 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, 6386 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0, 6387 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1, 6388adm31-old|o31|old adm31, 6389 rmul@, smso=\EG4, smul@, use=adm31, 6390# LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL 6391adm36|LSI ADM36, 6392 OTbs, OTpt, 6393 OTkn#4, 6394 if=/usr/share/tabset/vt100, 6395 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, 6396 use=vt100, 6397# (adm42: removed obsolete ":ma=^K^P:" -- esr) 6398adm42|lsi adm42, 6399 OTbs, am, 6400 cols#80, lines#24, 6401 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6402 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 6403 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I, 6404 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J, 6405 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@, 6406 smir=\Eq, smul@, use=adm+sgr, 6407# The following termcap for the Lear Siegler ADM-42 leaves the 6408# "system line" at the bottom of the screen blank (for those who 6409# find it distracting otherwise) 6410adm42-ns|lsi adm-42 with no system line, 6411 cbt=\EI\EF \011, clear=\E;\EF \011, 6412 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011, 6413 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011, 6414 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011, 6415 smir=\Eq\EF \011, use=adm42, 6416# ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985. 6417# The insert mode of this terminal is commented out because it's broken for our 6418# purposes in that it will shift the position of every character on the page, 6419# not just the cursor line! 6420# From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996 6421adm1178|1178|lsi adm1178, 6422 am, 6423 cols#80, lines#24, xmc#1, 6424 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, 6425 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 6426 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, 6427 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H, 6428 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0, 6429 sgr0=\E), smso=\EG4, smul=\EG1, 6430 6431#### Prime 6432# 6433# Yes, Prime made terminals. These entries were posted by Kevin J. Cummings 6434# <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr. 6435# Prime merged with ComputerVision in the late 1980s; you can reach them at: 6436# 6437# ComputerVision Services 6438# 500 Old Connecticut Path 6439# Framingham, Mass. 6440# 6441 6442# Standout mode is dim reverse-video. 6443pt100|pt200|wren|fenix|prime pt100/pt200, 6444 am, bw, mir, msgr, 6445 cols#80, it#8, lines#24, 6446 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H, 6447 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, 6448 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA, 6449 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M, 6450 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P, 6451 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D, 6452 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J, 6453 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m, 6454 sgr0=\E[m, 6455 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q, 6456 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m, 6457pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode, 6458 cols#132, 6459 cup=\E[%i%p1%d;%p2%dH, use=pt100, 6460pt250|Prime PT250, 6461 rmso@, smso@, use=pt100, 6462pt250w|Prime PT250 in 132-column mode, 6463 rmso@, smso@, use=pt100w, 6464 6465#### Qume (qvt) 6466# 6467# Qume, Inc. 6468# 3475-A North 1st Street 6469# San Jose CA 95134 6470# Vox: (800)-457-4447 6471# Fax: (408)-473-1510 6472# Net: josed@techsupp.wyse.com (Jose D'Oliveira) 6473# 6474# Qume was bought by Wyse, but still (as of early 1995) has its own support 6475# group and production division. 6476# 6477# Discontinued Qume models: 6478# 6479# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+ 6480# built to replace them, and a qvt119+ which was a 101+ with available wide 6481# mode (132 columns). There was a qvt103 which added vt100/vt131 emulations 6482# and an ANSI-compatible qvt203 that replaced it. Qume started producing 6483# ANSI-compatible terminals with the qvt323 and qvt61. 6484# 6485# Current Qume models (as of February 1995): 6486# 6487# All current Qume terminals have ANSI-compatible operation modes. 6488# Qume is still producing the qvt62, which features emulations for other 6489# popular lines such as ADDS, and dual-host capabilities. The qvt82 is 6490# designed for use as a SCO ANSI terminal. The qvt70 is a color terminal 6491# with many emulations including Wyse370, Wyse 325, etc. Their newest 6492# model is the qvt520, which is vt420-compatible. 6493# 6494# There are some ancient printing Qume terminals under `Daisy Wheel Printers' 6495# 6496# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its 6497# setup mode. Shift-s should be a configuration save to NVRAM. 6498 6499qvt101|qvt108|qume qvt 101 and QVT 108, 6500 xmc#1, use=qvt101+, 6501 6502# This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap 6503# file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked 6504# both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E). 6505# What seems to be going on here is that this entry was designed so that 6506# the normal highlight is bold and standout is dim plus something else 6507# (reverse-video maybe? But then, are there two <rev> sequences?) 6508qvt101+|qvt101p|qume qvt 101 PLUS product, 6509 am, bw, hs, ul, 6510 cols#80, lines#24, xmc#0, 6511 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J, 6512 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 6513 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET, 6514 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, 6515 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H, 6516 kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET, 6517 kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, 6518 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, 6519 khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(, 6520 smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, 6521qvt102|qume qvt 102, 6522 cnorm=\E., use=qvt101, 6523# (qvt103: added <rmam>/<smam> based on init string -- esr) 6524qvt103|qume qvt 103, 6525 am, xenl, xon, 6526 cols#80, it#8, lines#24, vt#3, 6527 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 6528 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 6529 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 6530 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 6531 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 6532 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 6533 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 6534 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, 6535 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>, 6536 rmso=\E[m$<2>, rmul=\E[m$<2>, 6537 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 6538 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>, 6539 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=, 6540 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 6541qvt103-w|qume qvt103 132 cols, 6542 cols#132, lines#24, 6543 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103, 6544qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals, 6545 am, hs, mir, msgr, 6546 cols#80, lines#24, xmc#0, 6547 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H, 6548 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 6549 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, 6550 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I, 6551 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX, 6552 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, 6553 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 6554 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 6555 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8, 6556 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, 6557qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines, 6558 lines#25, use=qvt119+, 6559qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode, 6560 cols#132, 6561 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+, 6562qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25, 6563 lines#25, use=qvt119+, 6564qvt203|qvt203+|qume qvt 203 Plus, 6565 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, 6566 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, 6567 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 6568 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103, 6569qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video), 6570 cols#132, lines#24, 6571 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203, 6572# 6573# Since a command is present for enabling 25 data lines, 6574# a specific terminfo entry may be generated for the 203. 6575# If one is desired for the QVT 119 PLUS then 25 lines must 6576# be selected in the status line (setup line 9). 6577# 6578qvt203-25|QVT 203 PLUS with 25 by 80 column mode, 6579 cols#80, lines#25, 6580 is2=\E[=40h\E[?3l, use=qvt203, 6581qvt203-25-w|QVT 203 PLUS with 25 by 132 columns, 6582 cols#132, lines#25, 6583 rs2=\E[?3h\E[=40h, use=qvt203, 6584 6585#### Televideo (tvi) 6586# 6587# TeleVideo 6588# 550 East Brokaw Road 6589# PO Box 49048 95161 6590# San Jose CA 95112 6591# Vox: (408)-954-8333 6592# Fax: (408)-954-0623 6593# 6594# 6595# These require incredible amounts of padding. 6596# 6597# All of these terminals (912 to 970 and the tvipt) are discontinued. Newer 6598# Televideo terminals are ANSI and PC-ANSI compatible. 6599 6600tvi803|televideo 803, 6601 clear=\E*$<10>, use=tvi950, 6602 6603# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86 6604# Switch settings are: 6605# 6606# S1 1 2 3 4 6607# D D D D 9600 6608# D D D U 50 6609# D D U D 75 6610# D D U U 110 6611# D U D D 135 6612# D U D U 150 6613# D U U D 300 6614# D U U U 600 6615# U D D D 1200 6616# U D D U 1800 6617# U D U D 2400 6618# U D U U 3600 6619# U U D D 4800 6620# U U D U 7200 6621# U U U D 9600 6622# U U U U 19200 6623# 6624# S1 5 6 7 8 6625# U D X D 7N1 (data bits, parity, stop bits) (X means ignored) 6626# U D X U 7N2 6627# U U D D 7O1 6628# U U D U 7O2 6629# U U U D 7E1 6630# U U U U 7E2 6631# D D X D 8N1 6632# D D X U 8N2 6633# D U D D 8O1 6634# D U U U 8E2 6635# 6636# S1 9 Autowrap 6637# U on 6638# D off 6639# 6640# S1 10 CR/LF 6641# U do CR/LF when CR received 6642# D do CR when CR received 6643# 6644# S2 1 Mode 6645# U block 6646# D conversational 6647# 6648# S2 2 Duplex 6649# U half 6650# D full 6651# 6652# S2 3 Hertz 6653# U 50 6654# D 60 6655# 6656# S2 4 Edit mode 6657# U local 6658# D duplex 6659# 6660# S2 5 Cursor type 6661# U underline 6662# D block 6663# 6664# S2 6 Cursor down key 6665# U send ^J 6666# D send ^V 6667# 6668# S2 7 Screen colour 6669# U green on black 6670# D black on green 6671# 6672# S2 8 DSR status (pin 6) 6673# U disconnected 6674# D connected 6675# 6676# S2 9 DCD status (pin 8) 6677# U disconnected 6678# D duplex 6679# 6680# S2 10 DTR status (pin 20) 6681# U disconnected 6682# D duplex 6683# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>, 6684# <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr) 6685tvi910|televideo model 910, 6686 OTbs, am, msgr, 6687 cols#80, it#8, lines#24, xmc#1, 6688 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6689 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET, 6690 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I, 6691 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H, 6692 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r, 6693 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 6694 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 6695 vpa=\E[%p1%{32}%+%c, use=adm+sgr, 6696# From: Alan R. Rogers <rogers%albany@csnet-relay> 6697# as subsequently hacked over by someone at SCO 6698# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr) 6699# 6700# Here are the 910+'s DIP switches (U = up, D = down, X = don't care): 6701# 6702# S1 1 2 3 4: 6703# D D D D 9600 D D D U 50 D D U D 75 D D U U 110 6704# D U D D 135 D U D U 150 D U U D 300 D U U U 600 6705# U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600 6706# U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200 6707# 6708# S1 5 6 7 8: 6709# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2 6710# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2 6711# D U D D 8O1 D U U U 8E2 6712# 6713# S1 9 Autowrap (U = on, D = off) 6714# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received) 6715# S2 1 Mode (U = block, D = conversational) 6716# S2 2 Duplex (U = half, D = full) 6717# S2 3 Hertz (U = 50, D = 60) 6718# S2 4 Edit mode (U = local, D = duplex) 6719# S2 5 Cursor type (U = underline, D = block) 6720# S2 6 Cursor down key (U = send ^J, D = send ^V) 6721# S2 7 Screen colour (U = green on black, D = black on green) 6722# S2 8 DSR status (pin 6) (U = disconnected, D = connected) 6723# S2 9 DCD status (pin 8) (U = disconnected, D = connected) 6724# S2 10 DTR status (pin 20) (U = disconnected, D = connected) 6725# 6726tvi910+|televideo 910+, 6727 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>, 6728 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, 6729 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, 6730 ll=\E=7\s, use=tvi910, 6731 6732# (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and 6733# <khome> from BRL entry -- esr) 6734tvi912|tvi914|tvi920|old televideo 912/914/920, 6735 OTbs, OTpt, am, msgr, 6736 cols#80, it#8, lines#24, xmc#1, 6737 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6738 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6739 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^, 6740 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt, 6741 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, 6742 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, 6743 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, 6744 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El, 6745 tbc=\E3, 6746# We got some new tvi912c terminals that act really weird on the regular 6747# termcap, so one of our gurus worked this up. Seems that cursor 6748# addressing is broken. 6749tvi912cc|tvi912 at cowell college, 6750 cup@, use=tvi912c, 6751 6752# tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C 6753# From: Benjamin C. W. Sittler 6754# 6755# Someone has put a scanned copy of the manual online at: 6756# http://vt100.net/televideo/912b-om/ 6757# 6758# These terminals were produced ca. 1979, and had a 12" monochrome 6759# screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit 6760# ASCII, and were generally similar to adm3a but with attributes 6761# (including some with magic cookies), fancy half-duplex mode, and 6762# different bugs. 6763# 6764# Some operations reqire truly incredible amounts of padding. The 6765# insert_line (<il1>) and delete_line (<dl1>) operations in particular 6766# are so slow as to be nearly unusable. 6767# 6768# There may or may not have been a separate, earlier series of 912/920 6769# terminals (without the "B" and "C" suffix); I have never seen one, 6770# and the manual only describes the "B" and "C" series. The 912 and 920 6771# are quite distinct from the 914 and 924, which were much nicer non- 6772# magic-cookie terminals similar to the 950. 6773# 6774# This is a new description for the following TeleVideo terminals, 6775# distinguished chiefly by their keyboards: 6776# 6777# TVI-912B - very odd layout, no function keys (84 keys) 6778# TVI-920B - typewriter layout, no function keys (103 keys) 6779# TVI-912C - very odd layout, function keys F1-F11 (82 keys) 6780# TVI-920C - typewriter layout, function keys F1-F11 (101 keys) 6781# 6782# To choose a setting for the TERM variable, start with the model: 6783# 6784# Model || base name 6785# ----------||----------- 6786# TVI-912B || tvi912b 6787# TVI-912C || tvi912c 6788# TVI-920B || tvi920b 6789# TVI-920C || tvi920c 6790# 6791# Then add a suffix from the following table describing installed options 6792# and how you'd like to use the terminal: 6793# 6794# Use Video | Second | Visual | Magic | Page || feature 6795# Attributes | Page | Bell | Cookies | Print || suffix 6796# ------------|--------|--------|---------|-------||--------- 6797# No | No | N/A | N/A | No || -unk 6798# No | No | N/A | N/A | Yes || -p 6799# No | Yes | No | N/A | No || -2p-unk 6800# No | Yes | No | N/A | Yes || -2p-p 6801# No | Yes | Yes | N/A | No || -vb-unk 6802# No | Yes | Yes | N/A | Yes || -vb-p 6803# Yes | No | N/A | No | N/A || 6804# Yes | No | N/A | Yes | N/A || -mc 6805# Yes | Yes | No | No | N/A || -2p 6806# Yes | Yes | No | Yes | N/A || -2p-mc 6807# Yes | Yes | Yes | No | N/A || -vb 6808# Yes | Yes | Yes | Yes | N/A || -vb-mc 6809# 6810# So e.g. a model 920 C with second page memory option, visual bell 6811# and no magic cookies would be tvi920c-vb; a model 912 B without the 6812# second page memory option and using magic cookies would be 6813# tvi912b-mc 6814# 6815# PADDING 6816# 6817# At 9600 baud, the terminal is prone to overflow its input buffer 6818# during complex operations (insert/delete 6819# character/line/screen/page), and it does not signal this over the 6820# RS232 cable. The typical symptom of an overrun is that the terminal 6821# starts beeping, and output becomes garbled. 6822# 6823# The padding delays in this terminfo were derived using tack(1) 6824# running on a Linux box connected to a TVI-920C with a later-model 6825# (A49C1-style) ROM running at 9600 baud, so your mileage may 6826# vary. The numbers below seem to give the terminal enough time so 6827# that it doesn't overflow its input buffer and start losing 6828# characters. 6829# 6830# KEYS 6831# 6832# If you want to use the FUNCT key on a tvi912[bc], use the 6833# corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from 6834# the following table (these also work on the 920 series): 6835# 6836# Unshifted Function Keys: 6837# 6838# Key | capname|| Equivalent 6839# -----|--------||------------ 6840# F1 | <kf1> || FUNCT + @ 6841# F2 | <kf2> || FUNCT + A 6842# F3 | <kf3> || FUNCT + B 6843# F4 | <kf4> || FUNCT + C 6844# F5 | <kf5> || FUNCT + D 6845# F6 | <kf6> || FUNCT + E 6846# F7 | <kf7> || FUNCT + F 6847# F8 | <kf8> || FUNCT + G 6848# F9 | <kf9> || FUNCT + H 6849# F10 | <kf10> || FUNCT + I 6850# F11 | <kf11> || FUNCT + J 6851# 6852# Shifted Function Keys: 6853# 6854# SHIFT + Key | capname|| Equivalent 6855# -------------|--------||------------ 6856# SHIFT + F1 | <kf12> || FUNCT + ` 6857# SHIFT + F2 | <kf13> || FUNCT + a 6858# SHIFT + F3 | <kf14> || FUNCT + b 6859# SHIFT + F4 | <kf15> || FUNCT + c 6860# SHIFT + F5 | <kf16> || FUNCT + d 6861# SHIFT + F6 | <kf17> || FUNCT + e 6862# SHIFT + F7 | <kf18> || FUNCT + f 6863# SHIFT + F8 | <kf19> || FUNCT + g 6864# SHIFT + F9 | <kf20> || FUNCT + h 6865# SHIFT + F10 | <kf21> || FUNCT + i 6866# SHIFT + F11 | <kf22> || FUNCT + j 6867# 6868# PORTS AND SWITCH SETTINGS 6869# 6870# Here are the switch settings for the TVI-912B/TVI-920B and 6871# TVI-912C/TVI-920C: 6872# 6873# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down: 6874# 2: 9600 3: 4800 4: 2400 5: 1200 6875# 6: 600 7: 300 8: 150 9: 75 6876# 10: 110 6877# 6878# S2 UART/Terminal options: 6879# Up Down 6880# 1: Not used Not allowed 6881# 2: Alternate character set Standard character set 6882# 3: Full duplex Half duplex 6883# 4: 50 Hz refresh 60 Hz refresh 6884# 5: No parity Send parity 6885# 6: 2 stop bits 1 stop bit 6886# 7: 8 data bits 7 data bits 6887# 8: Not used Not allowed on Rev E or lower 6888# 9: Even parity Odd parity 6889# 10: Steady cursor Blinking cursor 6890# (On Rev E or lower, use W25 instead of switch 10.) 6891# 6892# S5 UART/Terminal options: 6893# Open Closed 6894# 1: P3-6 Not connected DSR received on P3-6 6895# 2: P3-8 Not connected DCD received on P3-8 6896# 6897# 3 Open, 4 Open: P3-20 Not connected 6898# 3 Open, 4 Closed: DTR on when terminal is on 6899# 3 Closed, 4 Open: DTR is connected to RTS 6900# 3 Closed, 4 Closed: Not allowed 6901# 6902# 5 Closed: HDX printer (hardware control) Rev. K with extension port off, 6903# all data transmitted out of the modem port (P3) will also be 6904# transmitted out of the printer port (P4). 6905# 6906# 6 Open, 7 Open: Not allowed 6907# 6 Open, 7 Closed: 20ma current loop input 6908# 6 Closed, 7 Open: RS232 input 6909# 6 Closed, 7 Closed: Not allowed 6910# 6911# Jumper options: 6912# If the jumper is installed, the effect will occur (the next time the terminal 6913# is switched on). 6914# 6915# S4/W31: Enables automatic LF upon receipt of CR from 6916# remote or keyboard. 6917# S4/W32: Enables transmission of EOT at the end of Send. If not 6918# installed, a carriage return is sent. 6919# S4/W33: Disables automatic carriage return in column 80. 6920# S4/W34: Selects Page Print Mode as initial condition. If not 6921# installed, Extension Mode is selected. 6922# 6923# NON-STANDARD CAPABILITIES 6924# 6925# Sending <u9> or <u7> returns a cursor position report in the format 6926# YX\r, where Y and X are as in <cup>. This format is described in 6927# <u8> and <u6>, but it's not clear how one should write an 6928# appropriate scanf string, since we need to subtract %' ' from the 6929# character after reading it. The <u9> capability is used by tack(1) 6930# to synchronize during padding tests, and seems to work for that 6931# purpose. 6932# 6933# This description also includes the obsolete termcap capabilities 6934# has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>). 6935# 6936# FEATURES NOT YET DESCRIBED IN THIS TERMINFO 6937# 6938# The FUNCT modifier actually works with every normal key by sending 6939# ^AX\r, where X is the sequence normally sent by that key. This is a 6940# sort of meta key not currently describable in terminfo. 6941# 6942# There are quite a few other keys (especially on the 920 models,) but 6943# they are for the most part only useful in block mode. 6944# 6945# These terminals have lots of forms manipulation features, mainly 6946# useful in block mode, including "clear X to nulls" (vs. "clear X to 6947# spaces"; nulls are sentinels for "send X" operations); "send X" 6948# operations for uploading all or part of the screen; and block-mode 6949# editing keys (they don't send escape sequences, but manipulate video 6950# memory directly). Block mode is used for local editing, and protect 6951# mode (in conjunction with the "write protect" attribute, 6952# a.k.a. half-intensity outside of protect mode) is used to control 6953# which parts of the screen are edited/sent/printed (by <mc0>). 6954# 6955# There are at least two major families of ROM, "early" and 6956# A49B1/A49C1; the major difference seems to be that the latter ROMs 6957# support a few extra escape sequences for manipulating the off-screen 6958# memory page, and for sending whole pages back to the host (mainly 6959# useful in block mode.) The descriptions in this file don't use any 6960# of those sequences: set cursor position including page (\E-PYX, 6961# where P is \s for page 0 and ! for page 1 [actually only the LSB of 6962# P is taken into account, so e.g. 0 and 1 work too,] and Y and X are 6963# as in <cup>); read cursor position (\E/), which is analogous to <u9> 6964# and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX 6965# are as in <cup>, and some "send page" features mainly useful for 6966# forms manipulation. 6967# 6968# The keyboard enable (\E") and disable (\E#) sequences are unused, 6969# except that a terminal reset (<is2>) enables the keyboard. 6970# 6971# Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew) 6972# enabled in <is2>, but auto-flip is very jarring so we don't use it. 6973# 6974# BUGS 6975# 6976# At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed 6977# sequences (I infer that in some TeleVideo terminal they may invert 6978# and uninvert the display) so the <flash> sequence given here is a 6979# cheesy page-flip instead. 6980# 6981# The back_tab (<cbt>) sequence (\EI) doesn't work according to 6982# tack(1), so it is not included in the descriptions below. 6983# 6984# It's not clear whether auto_left_margin (<bw>) flag should be set 6985# for these terminals; tack says yes, so it is set here, but this 6986# differs from other descriptions I've seen. 6987# 6988# Extension print mode (<mc5>) echoes all characters to the printer 6989# port [in addition to displaying them] except for the page print mode 6990# sequence (<mc4>); this is a slight violation of the terminfo 6991# definition for <mc5> but I don't expect it to cause problems. We 6992# reset to page print mode in <rs1> since it may have been enabled 6993# accidentally. 6994# 6995# The descriptions with plus signs (+) are building blocks. 6996 6997tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes), 6998 OTbs, OTpt, am, bw, 6999 cols#80, it#8, lines#24, 7000 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7001 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>, 7002 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>, 7003 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>, 7004 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>, 7005 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J, 7006 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA, 7007 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r, 7008 u7=\E?, u8=%c%c\r, u9=\E?, 7009 7010# This isn't included in the basic capabilities because it is 7011# typically unusable in combination with the full range of video 7012# attributes, since the magic cookie attributes turn into ASCII 7013# control characters, and the half-intensity ("protected") attribute 7014# converts all affected characters to spaces. 7015 7016tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support, 7017 mc0=\EP, 7018 7019# This uses half-intensity mode (<dim>) for standout (<smso>), and 7020# exposes no other attributes (half-intensity is the only attribute 7021# that does not generate a magic cookie.) 7022 7023tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support, 7024 msgr, 7025 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(, 7026 smso=\E), 7027 7028# Full magic-cookie attribute support, with half-intensity reverse 7029# video for standout. Note that we add a space in the <dim> sequence 7030# to give a consistent magic-cookie count. Also note that <sgr> uses 7031# backspacing (in the TVI-supported order) to apply all requested 7032# attributes with only a single magic cookie. 7033 7034tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support, 7035 xmc#1, 7036 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek, 7037 rmul=\Em, 7038 sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;, 7039 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El, 7040 7041# This uses the second page memory option to save & restore screen 7042# contents. If your terminal is missing the option, this description 7043# should still work, but that has not been tested. 7044 7045tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support, 7046 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s, 7047 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>, 7048 7049# This simulates flashing by briefly toggling to the other page 7050# (kludge!) 7051 7052tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support, 7053 bel=\EK$<100>\EK, use=tvi912b+2p, 7054 7055# Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>) 7056 7057tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support, 7058 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r, 7059 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r, 7060 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r, 7061 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 7062 kf8=^AG\r, kf9=^AH\r, 7063 7064# Combinations of the basic building blocks 7065 7066tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes), 7067 use=tvi912b+2p, use=tvi912b-unk, 7068 7069tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes), 7070 use=tvi912b+vb, use=tvi912b-unk, 7071 7072tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print), 7073 use=tvi912b+printer, use=tvi912b-unk, 7074 7075tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print), 7076 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk, 7077 7078tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print), 7079 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk, 7080 7081tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute), 7082 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk, 7083 7084tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies), 7085 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk, 7086 7087tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute), 7088 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk, 7089 7090tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies), 7091 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk, 7092 7093tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute), 7094 use=tvi912b+dim, use=tvi912b-unk, 7095 7096tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies), 7097 use=tvi912b+mc, use=tvi912b-unk, 7098 7099tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes), 7100 use=tvi920b+fn, use=tvi912b-unk, 7101 7102tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes), 7103 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk, 7104 7105tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes), 7106 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk, 7107 7108tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print), 7109 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk, 7110 7111tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print), 7112 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer, 7113 use=tvi912b-unk, 7114 7115tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print), 7116 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer, 7117 use=tvi912b-unk, 7118 7119tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute), 7120 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim, 7121 use=tvi912b-unk, 7122 7123tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies), 7124 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc, 7125 use=tvi912b-unk, 7126 7127tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute), 7128 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim, 7129 use=tvi912b-unk, 7130 7131tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies), 7132 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc, 7133 use=tvi912b-unk, 7134 7135tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute), 7136 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk, 7137 7138tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies), 7139 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk, 7140 7141# Televideo 921 and variants 7142# From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995 7143# (tvi921: removed :ko=bt: before translation, I see no backtab cap; 7144# also added empty <acsc> to suppress tic warning -- esr) 7145tvi921|televideo model 921 with sysline same as page & real vi function, 7146 OTbs, OTpt, am, hs, xenl, xhp, 7147 cols#80, lines#24, xmc#0, 7148 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L, 7149 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, 7150 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, 7151 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, 7152 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@, 7153 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H, 7154 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>, 7155 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%, 7156 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr, 7157# without the beeper 7158# (tvi92B: removed :ko=bt: before translation, I see no backtab cap; 7159# also added empty <acsc> to suppress tic warning -- esr) 7160tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper, 7161 am, hs, xenl, xhp, 7162 cols#80, lines#24, xmc#0, 7163 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L, 7164 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, 7165 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, 7166 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I, 7167 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, 7168 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, 7169 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, 7170 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, 7171 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr, 7172# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr) 7173tvi92D|tvi92B with DTR instead of XON/XOFF & better padding, 7174 dl1=\ER$<2*/>, il1=\EE$<2*/>, 7175 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>, 7176 kil1=\EE$<2*/>, use=tvi92B, 7177 7178# (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings 7179# in from a BSD termcap file because it looks like they do something the 7180# old ones skip -- esr) 7181tvi924|televideo tvi924, 7182 am, bw, hs, in, mir, msgr, xenl, xon, 7183 cols#80, it#8, lines#24, wsl#80, xmc#0, 7184 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0, 7185 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c, 7186 cub1=^H, cud1=^V, cuf1=^L, 7187 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1, 7188 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et, 7189 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1, 7190 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, 7191 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0, 7192 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, 7193 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r, 7194 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r, 7195 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, 7196 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^, 7197 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4, 7198 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, 7199 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef, 7200 use=adm+sgr, 7201 7202# TVI925 DIP switches. In each of these, D = Down and U = Up, 7203# 7204# Here are the settings for the external (baud) switches (S1): 7205# 7206# Position Baud 7207# 7 8 9 10 [Printer] 7208# 1 2 3 4 [Main RS232] 7209# ----------------------------------------------------- 7210# D D D D 9600 7211# D D D U 50 7212# D D U D 75 7213# D D U U 110 7214# D U D D 135 7215# D U D U 150 7216# D U U D 300 7217# D U U U 600 7218# U D D D 1200 7219# U D D U 1800 7220# U D U D 2400 7221# U D U U 3600 7222# U U D D 4800 7223# U U D U 7200 7224# U U U D 9600 7225# U U U U 19200 7226# 7227# 7228# Settings for word length and stop-bits (S1) 7229# 7230# Position Description 7231# 5 6 7232# --------------------------- 7233# U - 7-bit word 7234# D - 8-bit word 7235# - U 2 stop bits 7236# - D 1 stop bit 7237# 7238# 7239# S2 (external) settings 7240# 7241# Position Up Dn Description 7242# -------------------------------------------- 7243# 1 X Local edit 7244# X Duplex edit (transmit editing keys) 7245# -------------------------------------------- 7246# 2 X 912/920 emulation 7247# X 925 7248# -------------------------------------------- 7249# 3 X 7250# 4 X No parity 7251# 5 X 7252# -------------------------------------------- 7253# 3 X 7254# 4 X Odd parity 7255# 5 X 7256# -------------------------------------------- 7257# 3 X 7258# 4 X Even parity 7259# 5 X 7260# -------------------------------------------- 7261# 3 X 7262# 4 X Mark parity 7263# 5 X 7264# -------------------------------------------- 7265# 3 X 7266# 4 X Space parity 7267# 5 X 7268# -------------------------------------------- 7269# 6 X White on black display 7270# X Black on white display 7271# -------------------------------------------- 7272# 7 X Half Duplex 7273# 8 X 7274# -------------------------------------------- 7275# 7 X Full Duplex 7276# 8 X 7277# -------------------------------------------- 7278# 7 X Block mode 7279# 8 X 7280# -------------------------------------------- 7281# 9 X 50 Hz 7282# X 60 Hz 7283# -------------------------------------------- 7284# 10 X CR/LF (Auto LF) 7285# X CR only 7286# 7287# S3 (internal switch) settings: 7288# 7289# Position Up Dn Description 7290# -------------------------------------------- 7291# 1 X Keyclick off 7292# X Keyclick on 7293# -------------------------------------------- 7294# 2 X English 7295# 3 X 7296# -------------------------------------------- 7297# 2 X German 7298# 3 X 7299# -------------------------------------------- 7300# 2 X French 7301# 3 X 7302# -------------------------------------------- 7303# 2 X Spanish 7304# 3 X 7305# -------------------------------------------- 7306# 4 X Blinking block cursor 7307# 5 X 7308# -------------------------------------------- 7309# 4 X Blinking underline cursor 7310# 5 X 7311# -------------------------------------------- 7312# 4 X Steady block cursor 7313# 5 X 7314# -------------------------------------------- 7315# 4 X Steady underline cursor 7316# 5 X 7317# -------------------------------------------- 7318# 6 X Screen blanking timer (ON) 7319# X Screen blanking timer (OFF) 7320# -------------------------------------------- 7321# 7 X Page attributes 7322# X Line attributes 7323# -------------------------------------------- 7324# 8 X DCD disconnected 7325# X DCD connected 7326# -------------------------------------------- 7327# 9 X DSR disconnected 7328# X DSR connected 7329# -------------------------------------------- 7330# 10 X DTR Disconnected 7331# X DTR connected 7332# -------------------------------------------- 7333# 7334# (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr) 7335tvi925|televideo 925, 7336 OTbs, am, bw, hs, ul, 7337 cols#80, lines#24, xmc#1, 7338 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V, 7339 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 7340 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET, 7341 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1, 7342 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z, 7343 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, 7344 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, 7345 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, 7346 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3, 7347 tsl=\Eh\Ef, use=adm+sgr, 7348# TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL 7349# to avoid "magic cookie" standout glitch: 7350tvi925-hi|TeleVideo Model 925 with half intensity standout mode, 7351 xmc@, 7352 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925, 7353 7354# From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993 7355# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82 7356# for additional capabilities, 7357# The following tvi descriptions from B:pjphar and virus!mike 7358# is for all 950s. It sets the following attributes: 7359# full duplex (\EDF) write protect off (\E() 7360# conversation mode (\EC) graphics mode off (\E%) 7361# white on black (\Ed) auto page flip off (\Ew) 7362# turn off status line (\Eg) clear status line (\Ef\r) 7363# normal video (\E0) monitor mode off (\EX or \Eu) 7364# edit mode (\Er) load blank char to space (\Ee\040) 7365# line edit mode (\EO) enable buffer control (^O) 7366# protect mode off (\E\047) duplex edit keys (\El) 7367# program unshifted send key to send line all (\E016) 7368# program shifted send key to send line unprotected (\E004) 7369# set the following to nulls: 7370# field delimiter (\Ex0\200\200) 7371# line delimiter (\Ex1\200\200) 7372# start-protected field delimiter (\Ex2\200\200) 7373# end-protected field delimiter (\Ex3\200\200) 7374# set end of text delimiter to carriage return/null (\Ex4\r\200) 7375# 7376# TVI 950 Switch Setting Reference Charts 7377# 7378# TABLE 1: 7379# 7380# S1 1 2 3 4 5 6 7 8 9 10 7381# +-----------------------+-----+-----+-----------------------+ 7382# | Computer Baud Rate |Data |Stop | Printer Baud Rate | 7383# | |Bits |Bits | | 7384# +------+-----------------------+-----+-----+-----------------------+ 7385# | Up | See | 7 | 2 | See | 7386# +------+-----------------------+-----+-----+-----------------------+ 7387# | Down | TABLE 2 | 8 | 1 | TABLE 2 | 7388# +------+-----------------------+-----+-----+-----------------------+ 7389# 7390# 7391# S2 1 2 3 4 5 6 7 8 9 10 7392# +-----+-----+-----------------+-----+-----------+-----+-----+ 7393# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click| 7394# +------+-----+-----+-----------------+-----+-----------+-----+-----+ 7395# | Up | Dplx|Blink| See |GonBk| See | 60 | Off | 7396# +------+-----+-----+-----------------+-----+-----------+-----+-----+ 7397# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On | 7398# +------+-----+-----+-----------------+-----+-----------+-----+-----+ 7399# 7400# TABLE 2: 7401# 7402# +-----------+-----+-----+-----+-----+-----------+ 7403# | Display | 1 | 2 | 3 | 4 | Baud | 7404# +-----------+-----+-----+-----+-----+ | 7405# | Printer | 7 | 8 | 9 | 10 | Rate | 7406# +-----------+-----+-----+-----+-----+-----------+ 7407# | D | D | D | D | 9600 | 7408# | U | D | D | D | 50 | 7409# | D | U | D | D | 75 | 7410# | U | U | D | D | 110 | 7411# | D | D | U | D | 135 | 7412# | U | D | U | D | 150 | 7413# | D | U | U | D | 300 | 7414# | U | U | U | D | 600 | 7415# | D | D | D | U | 1200 | 7416# | U | D | D | U | 1800 | 7417# | D | U | D | U | 2400 | 7418# | U | U | D | U | 3600 | 7419# | D | D | U | U | 4800 | 7420# | U | D | U | U | 7200 | 7421# | D | U | U | U | 9600 | 7422# | U | U | U | U | 19200 | 7423# +-----+-----+-----+-----+-----------+ 7424# 7425# TABLE 3: 7426# +-----+-----+-----+-----------+ 7427# | 3 | 4 | 5 | Parity | 7428# +-----+-----+-----+-----------+ 7429# | X | X | D | None | 7430# | D | D | U | Odd | 7431# | D | U | U | Even | 7432# | U | D | U | Mark | 7433# | U | U | U | Space | 7434# +-----+-----+-----+-----------+ 7435# X = don't care 7436# 7437# CHART: 7438# +-----+-----+-----------------+ 7439# | 7 | 8 | Communication | 7440# +-----+-----+-----------------+ 7441# | D | D | Half Duplex | 7442# | D | U | Full Duplex | 7443# | U | D | Block | 7444# | U | U | Local | 7445# +-----+-----+-----------------+ 7446# 7447# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:". 7448# I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich> 7449# should be present and all tvi native modes use the same string for this. 7450# Finally, note that BSD has cud1=^V. -- esr) 7451tvi950|televideo 950, 7452 OTbs, am, hs, mir, msgr, xenl, xon, 7453 cols#80, it#8, lines#24, xmc#1, 7454 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*, 7455 cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7456 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 7457 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed, 7458 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J, 7459 invis@, 7460 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r, 7461 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L, 7462 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r, 7463 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 7464 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 7465 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X, 7466 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef, 7467 use=adm+sgr, 7468# 7469# is for 950 with two pages adds the following: 7470# set 48 line page (\E\\2) 7471# place cursor at page 0, line 24, column 1 (\E-07 ) 7472# set local (no send) edit keys (\Ek) 7473# 7474# two page 950 adds the following: 7475# when entering ex, set 24 line page (\E\\1) 7476# when exiting ex, reset 48 line page (\E\\2) 7477# place cursor at 0,24,1 (\E-07 ) 7478# set duplex (send) edit keys (\El) when entering vi 7479# set local (no send) edit keys (\Ek) when exiting vi 7480# 7481tvi950-2p|televideo950 w/2 pages, 7482 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011, 7483 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 7484 smkx=\El, use=tvi950, 7485# 7486# is for 950 with four pages adds the following: 7487# set 96 line page (\E\\3) 7488# place cursor at page 0, line 24, column 1 (\E-07 ) 7489# 7490# four page 950 adds the following: 7491# when entering ex, set 24 line page (\E\\1) 7492# when exiting ex, reset 96 line page (\E\\3) 7493# place cursor at 0,24,1 (\E-07 ) 7494# 7495tvi950-4p|televideo950 w/4 pages, 7496 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011, 7497 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 7498 smkx=\El, use=tvi950, 7499# 7500# <is2> for reverse video 950 changes the following: 7501# set reverse video (\Ed) 7502# 7503# set vb accordingly (\Ed ...delay... \Eb) 7504# 7505tvi950-rv|televideo950 rev video, 7506 flash=\Ed$<200/>\Eb, 7507 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0, 7508 use=tvi950, 7509 7510# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv 7511tvi950-rv-2p|televideo950 rev video w/2 pages, 7512 flash=\Ed$<200/>\Eb, 7513 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s, 7514 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 7515 smkx=\El, use=tvi950, 7516 7517# tvi950-rv uses the appropriate entries from 950-4p and 950-rv 7518tvi950-rv-4p|televideo950 rev video w/4 pages, 7519 flash=\Ed$<200/>\Eb, 7520 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s, 7521 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 7522 smkx=\El, use=tvi950, 7523# From: Andreas Stolcke <stolcke@icsi.berkeley.edu> 7524# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H"; 7525# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in 7526# the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note 7527# the :ko: string had :cl: in it, which means that one of the original 7528# <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what 7529# the 950 has. Finally, corrected the <kel> string to match the 950 and what 7530# ko implies -- esr) 7531# If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would 7532# also work. 7533tvi955|televideo 955, 7534 OTbs, mc5i, msgr@, 7535 it#8, xmc@, 7536 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2, 7537 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH, 7538 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1, 7539 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1, 7540 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%, 7541 rmam=\E[=7l, rmxon=^N, 7542 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r, 7543 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O, 7544 use=tvi950, 7545tvi955-w|955-w|televideo955 w/132 cols, 7546 cols#132, 7547 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955, 7548# use half-intensity as normal mode, full intensity as <bold> 7549tvi955-hb|955-hb|televideo955 half-bright, 7550 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El, 7551 sgr0=\EG0\E[=5h, use=tvi955, 7552# From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin 7553# (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m; 7554# added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL. 7555# According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what 7556# it does to the function keys. I deduced <rmam>/<smam>. 7557# also added empty <acsc> to suppress tic warning, -- esr) 7558tvi970|televideo 970, 7559 OTbs, OTpt, am, da, db, mir, msgr, 7560 cols#80, it#8, lines#24, 7561 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, 7562 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df, 7563 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r, 7564 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H, 7565 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L, 7566 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J, 7567 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 7568 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f, 7569 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B, 7570 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m, 7571 sgr0=\E[m, smacs=\E(B, smam=\E[?7l, 7572 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m, 7573 smul=\E[4m, vpa=\E[%i%p1%dd, 7574tvi970-vb|televideo 970 with visual bell, 7575 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, 7576 use=tvi970, 7577tvi970-2p|televideo 970 with using 2 pages of memory, 7578 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q, 7579 use=tvi970, 7580# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars 7581# per line (rather than 40), Esc K chooses the normal character set. Not sure 7582# padding is needed, but adapted from the tvi920c termcap. The <smso> and 7583# <smul> strings are klutzy, but at least use no screen space. 7584# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>, 7585# its absence means <smam>=\Ev isn't safe to use. -- esr) 7586# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84. 7587# The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says: 7588# F1 and F2 should be programmed as ^A and ^B; required for UNIFY. 7589tvipt|televideo personal terminal, 7590 OTbs, am, 7591 cols#80, lines#24, 7592 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L, 7593 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>, 7594 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt, 7595 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J, 7596 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R, 7597 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH, 7598# From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996 7599tvi9065|televideo 9065, 7600 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon, 7601 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0, 7602 wnum#0, wsl#30, 7603 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G, 7604 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z, 7605 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, 7606 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L, 7607 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA, 7608 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp, 7609 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY, 7610 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, 7611 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt, 7612 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1, 7613 ip=$<3>, 7614 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er, 7615 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s, 7616 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, 7617 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, 7618 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 7619 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H, 7620 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J, 7621 pfkey=\E|%p1%{48}%+%c3%p2%s\031, 7622 pfloc=\E|%p1%{48}%+%c2%p2%s\031, 7623 pfx=\E|%p1%{48}%+%c1%p2%s\031, 7624 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&, 7625 rep=\E[%p2%db%p1%c, rev=\EG4, 7626 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT, 7627 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H, 7628 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0, 7629 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l, 7630 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1, 7631 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0, 7632 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;, 7633 sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er, 7634 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O, 7635 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0, 7636 7637#### Visual (vi) 7638# 7639# In September 1993, Visual Technology of Westboro, Massachusetts, 7640# merged with White Pine Software of Nashua, New Hampshire. 7641# 7642# White Pine Software may be contacted at +1 603/886-9050. 7643# Or visit White Pine on the World Wide Web at URL http://www.wpine.com. 7644# 7645 7646# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs> 7647# Recently I hacked together the following termcap for Visual 7648# Technology's Visual 50 terminal. It's a slight modification of 7649# the vt52 termcap. 7650# It's intended to run when the Visual 50 is in vt52 emulation mode 7651# (I know what you're thinking; if it's emulating a vt52, then why 7652# another termcap? Well, it turns out that the Visual 50 can handle 7653# <dl1> and db(?) among other things, which the vt52 can't) 7654# The termcap works OK for the most part. The only problem is on 7655# character inserts. The whole line gets painfully redrawn for each 7656# character typed. Any suggestions? 7657# Beau's entry is combined with the vi50 entry from University of Wisconsin. 7658# Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in 7659# disguise; <kf7>-<kf9> are really l1-l3. 7660vi50|visual 50, 7661 OTbs, OTpt, am, da, db, msgr, 7662 cols#80, it#8, lines#24, 7663 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H, 7664 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 7665 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH, 7666 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 7667 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV, 7668 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH, 7669 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES, 7670# this one was BSD & SCO's vi50 7671vi50adm|visual 50 in adm3a mode, 7672 am, msgr, 7673 cols#80, it#8, lines#24, 7674 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7675 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM, 7676 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H, 7677 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, 7678 rmso=\ET, smso=\EU, 7679# From: Jeff Siegal <jbs@quiotix.com> 7680vi55|Visual 55, 7681 OTbs, am, mir, msgr, 7682 cols#80, it#8, lines#24, 7683 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H, 7684 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 7685 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, 7686 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED, 7687 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET, 7688 smir=\Ea, smso=\EU, 7689 7690# Visual 200 from BRL 7691# The following switch settings are assumed for normal operation: 7692# FULL_DUPLEX SCROLL CR 7693# AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE 7694# Other switches may be set for operator convenience or communication 7695# requirements. 7696# Character insertion is kludged in order to get around the "beep" misfeature. 7697# (This cap is commented out because <smir>/<rmir> is more efficient -- esr) 7698# Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>, 7699# and <dl1> strings, but we seem to get along fine without them. 7700vi200|visual 200, 7701 OTbs, OTpt, am, mir, msgr, 7702 OTkn#10, cols#80, it#8, lines#24, 7703 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H, 7704 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 7705 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, 7706 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea, 7707 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 7708 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p, 7709 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, 7710 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei, 7711 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, 7712 rmacs=\EG, rmkx=\E>, rmso=\E3, 7713 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF, 7714 smkx=\E=, smso=\E4, tbc=\Eg, 7715# The older Visuals didn't come with function keys. This entry uses 7716# <smkx> and <rmkx> so that the keypad keys can be used as function keys. 7717# If your version of vi doesn't support function keys you may want 7718# to use vi200-f. 7719vi200-f|visual 200 no function keys, 7720 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q, 7721 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w, 7722 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@, 7723 use=vi200, 7724vi200-rv|visual 200 reverse video, 7725 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200, 7726 7727# the function keys are programmable but we don't reprogram them to their 7728# default values with <is2> because programming them is very verbose. maybe 7729# an initialization file should be made for the 300 and they could be stuck 7730# in it. 7731# (vi300: added <rmam>/<smam> based on init string -- esr) 7732vi300|visual 300 ansi x3.64, 7733 am, bw, mir, xenl, 7734 cols#80, lines#24, 7735 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, 7736 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 7737 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 7738 il1=\E[L, ind=^J, 7739 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s, 7740 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 7741 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\, 7742 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\, 7743 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l, 7744 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, 7745 smso=\E[1m, smul=\E[4m, 7746# some of the vi300s have older firmware that has the command 7747# sequence for setting editing extent reversed. 7748vi300-old|visual 300 with old firmware (set edit extent reversed), 7749 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, 7750 use=vi300, 7751 7752# Visual 500 prototype entry from University of Wisconsin. 7753# The best place to look for the escape sequences is page A1-1 of the 7754# Visual 500 manual. The initialization sequence given here may be 7755# overkill, but it does leave out some of the initializations which can 7756# be done with the menus in set-up mode. 7757# The :xp: line below is so that emacs can understand the padding requirements 7758# of this slow terminal. :xp: is 10 time the padding factor. 7759# (vi500: removed unknown :xp#4: termcap; 7760# also added empty <acsc> to suppress tic warning -- esr) 7761vi500|visual 500, 7762 am, mir, msgr, 7763 cols#80, it#8, lines#33, 7764 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M, 7765 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB, 7766 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 7767 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>, 7768 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>, 7769 ind=^J, 7770 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\, 7771 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 7772 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G, 7773 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D, 7774 7775# The visual 550 is a visual 300 with tektronix graphics, 7776# and with 33 lines. clear screen is modified here to 7777# also clear the graphics. 7778vi550|visual 550 ansi x3.64, 7779 lines#33, 7780 clear=\030\E[H\E[2J, use=vi300, 7781 7782vi603|visual603|visual 603, 7783 hs, mir, 7784 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, 7785 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C, 7786 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 7787 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L, 7788 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r, 7789 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 7790 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~, 7791 use=vt100, 7792 7793#### Wyse (wy) 7794# 7795# Wyse Technology 7796# 3471 North First Street 7797# San Jose, CA 95134 7798# Vox: (408)-473-1200 7799# Fax: (408) 473-1222 7800# Web: http://www.wyse.com 7801# 7802# Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at 7803# (800)-800-WYSE (option 5 gets you a human). There's a Web page at the 7804# obvious address, <http://www.wyse.com>. They keep terminfo entries at 7805# <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>. 7806# 7807# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995. 7808# They now own the Qume and Amdek brands, too. So these are the people to 7809# talk with about all Link, Qume, and Amdek terminals. 7810# 7811# These entries include a few small fixes. 7812# I canceled the bel capacities in the vb entries. 7813# I made two trivial syntax fixes in the wyse30 entry. 7814# I made some entries relative to adm+sgr. 7815# 7816# 7817# Note: The wyse75, wyse85, and wyse99 have been discontinued. 7818 7819# Although the Wyse 30 can support more than one attribute 7820# it requires magic cookies to do so. Many applications do not 7821# function well with magic cookies. The following terminfo uses 7822# the protect mode to support one attribute (dim) without cookies. 7823# If more than one attribute is needed then the wy30-mc terminfo 7824# should be used. 7825# 7826wy30|wyse30|Wyse 30, 7827 am, bw, hs, mc5i, mir, msgr, xon, 7828 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, 7829 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, 7830 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H, 7831 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 7832 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>, 7833 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9, 7834 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>, 7835 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024, 7836 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, 7837 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, 7838 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 7839 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ, 7840 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T, 7841 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177, 7842 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>, 7843 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, 7844 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 7845 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, 7846 smso=\E`7\E), tbc=\E0, tsl=\EF, 7847# 7848# This terminal description uses the non-hidden attribute mode 7849# (with magic cookie). 7850# 7851# (wy30-mc: added <smcup> to suppress tic warning --esr) 7852wy30-mc|wyse30-mc|wyse 30 with magic cookies, 7853 msgr@, 7854 ma@, xmc#1, 7855 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003, 7856 rmcup=\EG0, rmso=\EG0, 7857 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 7858 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, 7859 smso=\EG4, use=wy30, use=adm+sgr, 7860# The mandatory pause used by <flash> does not work with 7861# older versions of terminfo. If you see this effect then 7862# unset xon and delete the / from the delay. 7863# i.e. change $<100/> to $<100> 7864wy30-vb|wyse30-vb|wyse 30 visible bell, 7865 bel@, use=wy30, 7866# 7867# The Wyse 50 can support one attribute (e.g. Dim, Inverse, 7868# Normal) without magic cookies by using the protect mode. 7869# The following description uses this feature, but when more 7870# than one attribute is put on the screen at once, all attributes 7871# will be changed to be the same as the last attribute given. 7872# The Wyse 50 can support more attributes when used with magic 7873# cookies. The wy50-mc terminal description uses magic cookies 7874# to correctly handle multiple attributes on a screen. 7875# 7876wy50|wyse50|Wyse 50, 7877 am, bw, hs, mc5i, mir, msgr, xon, 7878 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, 7879 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, 7880 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H, 7881 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 7882 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r, 7883 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, 7884 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>, 7885 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H, 7886 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, 7887 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, 7888 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 7889 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 7890 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 7891 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, 7892 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, 7893 pfx=\Ez%p1%{63}%+%c%p2%s\177, 7894 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E), 7895 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, 7896 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 7897 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, 7898 smso=\E`6\E), tbc=\E0, tsl=\EF, 7899# 7900# This terminal description uses the non-hidden attribute mode 7901# (with magic cookie). 7902# 7903# The mandatory pause used by flash does not work with some 7904# older versions of terminfo. If you see this effect then 7905# unset <xon> and delete the / from the delay. 7906# i.e. change $<100/> to $<100> 7907# (wy50-mc: added <smcup> to suppress tic warning --esr) 7908wy50-mc|wyse50-mc|wyse 50 with magic cookies, 7909 msgr@, 7910 ma@, xmc#1, 7911 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4, 7912 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0, 7913 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 7914 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, 7915 smso=\EGt, use=wy50, use=adm+sgr, 7916wy50-vb|wyse50-vb|wyse 50 visible bell, 7917 bel@, use=wy50, 7918wy50-w|wyse50-w|wyse 50 132-column, 7919 cols#132, lw#7, nlab#16, wsl#97, 7920 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, 7921 use=wy50, 7922wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell, 7923 bel@, use=wy50-w, 7924 7925# 7926# The Wyse 350 is a Wyse 50 with color. 7927# Unfortunately this means that it has magic cookies. 7928# The color attributes are designed to overlap the reverse, dim and 7929# underline attributes. This is nice for monochrome applications 7930# because you can make underline stuff green (or any other color) 7931# but for true color applications it's not so hot because you cannot 7932# mix color with reverse, dim or underline. 7933# To further complicate things one of the attributes must be 7934# black (either the foreground or the background). In reverse video 7935# the background changes color with black letters. In normal video 7936# the foreground changes colors on a black background. 7937# This terminfo uses some of the more advanced features of curses 7938# to display both color and blink. In the final analysis I am not 7939# sure that the wy350 runs better with this terminfo than it does 7940# with the wy50 terminfo (with user adjusted colors). 7941# 7942# The mandatory pause used by flash does not work with 7943# older versions of terminfo. If you see this effect then 7944# unset xon and delete the / from the delay. 7945# i.e. change $<100/> to $<100> 7946# 7947# Bug: The <op> capability resets attributes. 7948wy350|wyse350|Wyse 350, 7949 am, bw, hs, mc5i, mir, xon, 7950 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8, 7951 wsl#45, xmc#1, 7952 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, 7953 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, 7954 cub1=^H, cud1=^J, cuf1=^L, 7955 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>, 7956 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET, 7957 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, 7958 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>, 7959 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI, 7960 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, 7961 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, 7962 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 7963 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 7964 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 7965 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, 7966 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0, 7967 pfx=\Ez%p1%{63}%+%c%p2%s\177, 7968 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej, 7969 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=, 7970 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c, 7971 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 7972 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002, 7973 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr, 7974wy350-vb|wyse350-vb|wyse 350 visible bell, 7975 bel@, use=wy350, 7976wy350-w|wyse350-w|wyse 350 132-column, 7977 cols#132, lw#7, nlab#16, wsl#97, 7978 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, 7979 use=wy350, 7980wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell, 7981 bel@, use=wy350-w, 7982# 7983# This terminfo description is untested. 7984# The wyse100 emulates an adm31, so the adm31 entry should work. 7985# 7986wy100|wyse 100, 7987 hs, mir, 7988 cols#80, lines#24, xmc#1, 7989 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7990 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 7991 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J, 7992 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, 7993 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, 7994 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{, 7995 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr, 7996# 7997# The Wyse 120/150 has most of the features of the Wyse 60. 7998# This terminal does not need padding up to 9600 baud! 7999# <msgr> should be set but the clear screen fails when in 8000# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear 8001# then set <msgr>. 8002# 8003wy120|wyse120|wy150|wyse150|Wyse 120/150, 8004 am, bw, hs, km, mc5i, mir, msgr, xon, 8005 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, 8006 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 8007 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, 8008 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8009 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, 8010 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, 8011 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>, 8012 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, 8013 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 8014 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 8015 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 8016 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 8017 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 8018 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 8019 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 8020 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, 8021 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, 8022 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 8023 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 8024 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, 8025 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11, 8026 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, 8027 rs3=\EwG\Ee($<100>, 8028 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 8029 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 8030 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 8031 tbc=\E0, tsl=\EF, use=adm+sgr, 8032# 8033wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column, 8034 cols#132, lw#7, nlab#16, wsl#97, 8035 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, 8036 rs2=\E`;$<70>, use=wy120, 8037# 8038wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines, 8039 lh@, lines#25, lw@, nlab@, 8040 pln@, rs3=\EwG\Ee)$<100>, use=wy120, 8041# 8042wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines, 8043 lh@, lines#25, lw@, nlab@, 8044 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w, 8045# 8046wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell, 8047 bel@, use=wy120, 8048# 8049wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell, 8050 bel@, use=wy120-w, 8051# 8052# The Wyse 60 is like the Wyse 50 but with more padding. 8053# The reset strings are slow and the pad times very depending 8054# on other parameters such as font loading. I have tried 8055# to follow the following outline: 8056# 8057# <rs1> -> set personality 8058# <rs2> -> set number of columns 8059# <rs3> -> set number of lines 8060# <is1> -> select the proper font 8061# <is2> -> do the initialization 8062# <is3> -> set up display memory (2 pages) 8063# 8064# The Wyse 60's that have vt100 emulation are slower than the 8065# older Wyse 60's. This change happened mid-1987. 8066# The capabilities effected are <dch1> <dl1> <il1> <ind> <ri> 8067# 8068# The meta key is only half right. This terminal will return the 8069# high order bit set when you hit CTRL-function_key 8070# 8071# It may be useful to assign two function keys with the 8072# values \E=(\s look at old data in page 1 8073# \E=W, look at bottom of page 1 8074# where \s is a space ( ). 8075# 8076# Note: 8077# The Wyse 60 runs faster when the XON/XOFF 8078# handshake is turned off. 8079# 8080# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid 8081# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr) 8082wy60|wyse60|Wyse 60, 8083 am, bw, hs, km, mc5i, mir, msgr, 8084 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45, 8085 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 8086 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>, 8087 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8088 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 8089 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r, 8090 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, 8091 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>, 8092 ip=$<3>, is1=\EcB0\EcC1, 8093 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 8094 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 8095 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 8096 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 8097 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 8098 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 8099 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 8100 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, 8101 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, 8102 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 8103 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 8104 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>, 8105 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er, 8106 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>, 8107 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>, 8108 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 8109 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 8110 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 8111 tbc=\E0, tsl=\EF, use=adm+sgr, 8112# 8113wy60-w|wyse60-w|wyse 60 132-column, 8114 cols#132, lw#7, nlab#16, wsl#97, 8115 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>, 8116 rs2=\EeF$<150>\E`;$<150>, use=wy60, 8117# 8118wy60-25|wyse60-25|wyse 60 80-column 25-lines, 8119 lh@, lines#25, lw@, nlab@, 8120 pln@, rs3=\EwG\Ee)$<200>, use=wy60, 8121wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines, 8122 lh@, lines#25, lw@, nlab@, 8123 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w, 8124# 8125wy60-42|wyse60-42|wyse 60 80-column 42-lines, 8126 lines#42, 8127 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>, 8128 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>, 8129 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>, 8130 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60, 8131wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines, 8132 cols#132, lw#7, nlab#16, wsl#97, 8133 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>, 8134 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>, 8135 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42, 8136# 8137wy60-43|wyse60-43|wyse 60 80-column 43-lines, 8138 lh@, lines#43, lw@, nlab@, 8139 pln@, rs3=\Ee+$<150>, use=wy60-42, 8140wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines, 8141 lh@, lines#43, lw@, nlab@, 8142 pln@, rs3=\Ee+$<150>, use=wy60-42-w, 8143# 8144wy60-vb|wyse60-vb|Wyse 60 visible bell, 8145 bel@, use=wy60, 8146wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell, 8147 bel@, use=wy60-w, 8148 8149# The Wyse-99GT looks at lot like the Wyse 60 except that it 8150# does not have the 42/43 line mode. In the Wyse-60 the "lines" 8151# setup parameter controls the number of lines on the screen. 8152# For the Wyse 99GT the "lines" setup parameter controls the 8153# number of lines in a page. The screen can display 25 lines max. 8154# The Wyse-99GT also has personalities for the VT220 and 8155# Tektronix 4014. But this has no bearing on the native mode. 8156# 8157# (msgr) should be set but the clear screen fails when in 8158# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear 8159# then set msgr, else use msgr@. 8160# 8161# u0 -> enter Tektronix mode 8162# u1 -> exit Tektronix mode 8163# 8164wy99gt|wyse99gt|Wyse 99gt, 8165 msgr@, 8166 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>, 8167 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>, 8168 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@, 8169 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1, 8170 u0=\E~>\E8, u1=\E[42h, use=wy60, 8171# 8172wy99gt-w|wyse99gt-w|wyse 99gt 132-column, 8173 cols#132, lw#7, nlab#16, wsl#97, 8174 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>, 8175 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>, 8176 use=wy99gt, 8177# 8178wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines, 8179 lh@, lines#25, lw@, nlab@, 8180 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt, 8181# 8182wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines, 8183 lh@, lines#25, lw@, nlab@, 8184 pln@, rs2=\E`;$<150>, use=wy99gt-w, 8185# 8186wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell, 8187 bel@, use=wy99gt, 8188# 8189wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell, 8190 bel@, use=wy99gt-w, 8191 8192# Can't set tabs! Other bugs (ANSI mode only): 8193# - can't redefine function keys (anyway, key redefinition in ANSI mode 8194# is too much complex to be described); 8195# - meta key can't be described (the terminal forgets it when reset); 8196# The xon-xoff handshaking can't be disabled while in ansi personality, so 8197# emacs can't work at speed greater than 9600 baud. No padding is needed at 8198# this speed. 8199# dch1 has been commented out because it causes annoying glittering when 8200# vi deletes one character at the beginning of a line with tabs in it. 8201# dch makes sysgen(1M) have a horrible behaviour when deleting 8202# a screen and makes screen(1) behave badly, so it is disabled too. The nice 8203# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are 8204# not, so smir and rmir are commented out as well. 8205# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 8206wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard), 8207 am, km, mc5i, mir, msgr, xenl, 8208 cols#80, it#8, lines#25, vt#3, 8209 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~, 8210 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 8211 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M, 8212 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>, 8213 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED, 8214 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>, 8215 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 8216 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 8217 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>, 8218 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H, 8219 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, 8220 il1=\E[L, ind=\n$<1>, invis=\E[8m, 8221 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i, 8222 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 8223 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 8224 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ, 8225 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~, 8226 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~, 8227 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h, 8228 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8, 8229 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 8230 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m, 8231 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i, 8232 sc=\E7, 8233 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;, 8234 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h, 8235 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, 8236 8237# This is the american terminal. Here tabs work fine. 8238# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 8239wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard), 8240 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi, 8241 8242# This terminal (firmware version 02) has a lot of bugs: 8243# - can't set tabs; 8244# - other bugs in ANSI modes (see above). 8245# This description disables handshaking when using cup. This is because 8246# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal 8247# cannot be used at speeds greater than 9600 baud, because at greater 8248# speeds handshaking is needed even for character sending. If you use 8249# DTR handshaking, you can use even greater speeds. 8250# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 8251wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard), 8252 am, bw, hs, km, mc5i, mir, msgr, xon, 8253 cols#80, it#8, lines#25, wsl#46, 8254 acsc='x+y.wi~_vj(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G, 8255 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032, 8256 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L, 8257 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 8258 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r, 8259 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>, 8260 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE, 8261 ind=^J, invis=\EG3, 8262 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024, 8263 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, 8264 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, 8265 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r, 8266 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r, 8267 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r, 8268 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 8269 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#, 8270 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed., 8271 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30, 8272 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024, 8273 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;, 8274 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30, 8275 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF, 8276 8277# This is the american terminal. Here tabs work. 8278# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 8279wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard), 8280 hts=\E1, tbc=\E0, use=wy99f, 8281 8282# 8283# The Wyse 160 is combination of the WY-60 and the WY-99gt. 8284# The reset strings are slow and the pad times very depending 8285# on other parameters such as font loading. I have tried 8286# to follow the following outline: 8287# 8288# <rs1> -> set personality 8289# <rs2> -> set number of columns 8290# <rs3> -> set number of lines 8291# <is1> -> select the proper font 8292# <is2> -> do the initialization 8293# <is3> -> set up display memory (2 pages) 8294# 8295# The display memory may be used for either text or graphics. 8296# When "Display Memory = Shared" the terminal will have more pages 8297# but garbage may be left on the screen when you switch from 8298# graphics to text. If "Display Memory = Unshared" then the 8299# text area will be only one page long. 8300# 8301# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid 8302# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr) 8303wy160|wyse160|Wyse 160, 8304 am, bw, hs, km, mc5i, mir, msgr, 8305 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38, 8306 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 8307 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>, 8308 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8309 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>, 8310 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>, 8311 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I, 8312 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1, 8313 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 8314 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 8315 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 8316 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 8317 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 8318 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 8319 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 8320 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, 8321 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>, 8322 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 8323 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 8324 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>, 8325 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er, 8326 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>, 8327 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>, 8328 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 8329 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 8330 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 8331 tbc=\E0, tsl=\EF, use=adm+sgr, 8332# 8333wy160-w|wyse160-w|wyse 160 132-column, 8334 cols#132, lw#7, nlab#16, wsl#90, 8335 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>, 8336 rs2=\EeF$<150>\E`;$<150>, use=wy160, 8337# 8338wy160-25|wyse160-25|wyse 160 80-column 25-lines, 8339 lh@, lines#25, lw@, nlab@, 8340 pln@, rs3=\EwG\Ee)$<200>, use=wy160, 8341wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines, 8342 lh@, lines#25, lw@, nlab@, 8343 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w, 8344# 8345wy160-42|wyse160-42|wyse 160 80-column 42-lines, 8346 lines#42, 8347 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>, 8348 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>, 8349 rs3=\Ee*$<150>, use=wy160, 8350wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines, 8351 cols#132, lw#7, nlab#16, wsl#90, 8352 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>, 8353 rs2=\EeF$<150>\E`;$<150>, use=wy160-42, 8354# 8355wy160-43|wyse160-43|wyse 160 80-column 43-lines, 8356 lh@, lines#43, lw@, nlab@, 8357 pln@, rs3=\Ee+$<150>, use=wy160-42, 8358wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines, 8359 lh@, lines#43, lw@, nlab@, 8360 pln@, rs3=\Ee+$<150>, use=wy160-42-w, 8361# 8362wy160-vb|wyse160-vb|Wyse 160 visible bell, 8363 bel@, use=wy160, 8364wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell, 8365 bel@, use=wy160-w, 8366# 8367# The Wyse 75 is a vt100 lookalike without advanced video. 8368# 8369# The Wyse 75 can support one attribute (e.g. Dim, Inverse, 8370# Underline) without magic cookies. The following description 8371# uses this capability, but when more than one attribute is 8372# put on the screen at once, all attributes will be changed 8373# to be the same as the last attribute given. 8374# The Wyse 75 can support more attributes when used with magic 8375# cookies. The wy75-mc terminal description uses magic cookies 8376# to correctly handle multiple attributes on a screen. 8377# 8378wy75|wyse75|wyse 75, 8379 am, hs, mc5i, mir, msgr, xenl, xon, 8380 cols#80, lines#24, ma#1, pb#1201, wsl#78, 8381 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 8382 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>, 8383 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>, 8384 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 8385 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 8386 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>, 8387 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>, 8388 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001, 8389 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>, 8390 enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A, 8391 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 8392 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, 8393 ind=\n$<2>, ip=$<1>, 8394 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h, 8395 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D, 8396 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K, 8397 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 8398 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 8399 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i, 8400 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M, 8401 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 8402 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~, 8403 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i, 8404 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O, 8405 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, 8406 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l, 8407 sc=\E7, 8408 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;, 8409 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 8410 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m, 8411 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad, 8412# 8413# This terminal description uses the non-hidden attribute mode 8414# (with magic cookie). 8415# 8416wy75-mc|wyse75-mc|wyse 75 with magic cookies, 8417 msgr@, 8418 ma@, xmc#1, 8419 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p, 8420 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p, 8421 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;, 8422 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p, 8423 use=wy75, 8424wy75-vb|wyse75-vb|wyse 75 with visible bell, 8425 pb@, 8426 bel@, use=wy75, 8427wy75-w|wyse75-w|wyse 75 in 132 column mode, 8428 cols#132, wsl#130, 8429 rs2=\E[35h\E[?3h$<80>, use=wy75, 8430wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns, 8431 pb@, 8432 bel@, use=wy75-w, 8433# 8434# Wyse 85 emulating a vt220 7 bit mode. 8435# 24 line screen with status line. 8436# 8437# The vt220 mode permits more function keys but it wipes out 8438# the escape key. I strongly recommend that <f11> be set to 8439# escape (esc). 8440# The terminal may have to be set for 8 data bits and 2 stop 8441# bits for the arrow keys to work. 8442# The Wyse 85 runs faster with XON/XOFF enabled. Also the 8443# <dch> and <ich> work best when XON/XOFF is set. <ich> and 8444# <dch> leave trash on the screen when used without XON/XOFF. 8445# 8446wy85|wyse85|wyse 85, 8447 am, hs, mc5i, mir, msgr, xenl, xon, 8448 cols#80, it#8, lines#24, wsl#80, 8449 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 8450 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 8451 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M, 8452 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 8453 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 8454 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, 8455 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, 8456 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, 8457 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, 8458 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, 8459 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, 8460 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, 8461 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, 8462 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, 8463 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B, 8464 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~, 8465 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 8466 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 8467 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, 8468 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, 8469 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 8470 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, 8471 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, 8472 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, 8473 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, 8474 rs3=\E[?5l, sc=\E7, 8475 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 8476 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 8477 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 8478 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad, 8479# 8480# Wyse 85 with visual bell. 8481wy85-vb|wyse85-vb|wyse 85 with visible bell, 8482 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85, 8483# 8484# Wyse 85 in 132-column mode. 8485wy85-w|wyse85-w|wyse 85 in 132-column mode, 8486 cols#132, wsl#132, 8487 rs2=\E[35h\E[?3h$<70>, use=wy85, 8488# 8489# Wyse 85 in 132-column mode with visual bell. 8490wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns, 8491 bel@, use=wy85-w, 8492 8493# From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998 8494# This copes with an apparent firmware bug in the wy85. He writes: 8495# "What I did was change leave the terminal cursor keys set to Normal 8496# (instead of application), and change \E[ to \233 for all the keys in 8497# terminfo. At one point, I found some reference indicating that this 8498# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just 8499# me), but I can't find that and the server under my bookmark to "Wyse 8500# Technical" isn't responding. So there's the question of wether the wy85 8501# terminfo should reflect the manufactuer's intended behaviour of the terminal 8502# or the actual." 8503wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode, 8504 am, hs, mc5i, mir, msgr, xenl, xon, 8505 cols#80, it#8, lines#24, wsl#80, 8506 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 8507 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 8508 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M, 8509 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 8510 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 8511 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, 8512 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, 8513 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, 8514 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, 8515 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, 8516 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, 8517 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, 8518 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, 8519 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, 8520 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu, 8521 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B, 8522 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM, 8523 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, 8524 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~, 8525 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ, 8526 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, 8527 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~, 8528 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~, 8529 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, 8530 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, 8531 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, 8532 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, 8533 rs3=\E[?5l, sc=\E7, 8534 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;, 8535 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 8536 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 8537 tsl=\E[40h\E7\E[25;%i%p1%dH, 8538# 8539# Wyse 185 emulating a vt320 7 bit mode. 8540# 8541# This terminal always displays 25 lines. These lines may be used 8542# as 24 data lines and a terminal status line (top or bottom) or 8543# 25 data lines. The 48 and 50 line modes change the page size 8544# and not the number of lines on the screen. 8545# 8546# The Compose Character key can be used as a meta key if changed 8547# by set-up. 8548# 8549wy185|wyse185|wyse 185, 8550 am, hs, km, mc5i, mir, msgr, xenl, xon, 8551 cols#80, it#8, lines#24, wsl#80, 8552 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 8553 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 8554 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, 8555 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, 8556 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 8557 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 8558 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>, 8559 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, 8560 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>, 8561 el=\E[K, el1=\E[1K, enacs=\E)0, 8562 flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8, 8563 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH, 8564 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>, 8565 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, 8566 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h, 8567 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 8568 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, 8569 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 8570 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 8571 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, 8572 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 8573 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~, 8574 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, 8575 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, 8576 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, 8577 rmkx=\E>, rmso=\E[27m, rmul=\E[24m, 8578 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, 8579 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, 8580 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 8581 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, 8582 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, 8583 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd, 8584 use=vt220+keypad, 8585# 8586# Wyse 185 with 24 data lines and top status (terminal status) 8587wy185-24|wyse185-24|wyse 185 with 24 data lines, 8588 hs@, 8589 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, 8590 use=wy185, 8591# 8592# Wyse 185 with visual bell. 8593wy185-vb|wyse185-vb|wyse 185+flash, 8594 bel@, use=wy185, 8595# 8596# Wyse 185 in 132-column mode. 8597wy185-w|wyse185-w|wyse 185 in 132-column mode, 8598 cols#132, wsl#132, 8599 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 8600 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185, 8601# 8602# Wyse 185 in 132-column mode with visual bell. 8603wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols, 8604 bel@, use=wy185-w, 8605 8606# wy325 terminfo entries 8607# Done by Joe H. Davis 3-9-92 8608 8609# lines 25 columns 80 8610# 8611wy325|wyse325|Wyse epc, 8612 am, bw, hs, mc5i, mir, 8613 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, 8614 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 8615 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, 8616 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8617 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, 8618 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, 8619 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, 8620 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, 8621 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 8622 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 8623 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 8624 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 8625 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 8626 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 8627 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, 8628 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, 8629 mc0=\EP, mc4=^T, mc5=\Ed#, 8630 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 8631 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 8632 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, 8633 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11, 8634 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, 8635 rs3=\EwG\Ee($<100>, 8636 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 8637 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 8638 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0, 8639 tsl=\EF, use=adm+sgr, 8640 8641# 8642# lines 24 columns 80 vb 8643# 8644wy325-vb|wyse325-vb|wyse-325 with visual bell, 8645 bel@, use=wy325, 8646 8647# 8648# lines 24 columns 132 8649# 8650wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode, 8651 cols#132, lw#7, nlab#16, wsl#97, 8652 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, 8653 rs2=\E`;$<70>, use=wy325, 8654# 8655# lines 25 columns 80 8656# 8657wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines, 8658 lh@, lines#25, lw@, nlab@, 8659 pln@, rs3=\EwG\Ee)$<100>, use=wy325, 8660# 8661# lines 25 columns 132 8662# 8663wy325-25w|wyse325-25w|wy325 132 columns, 8664 lh@, lines#25, lw@, nlab@, 8665 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 8666# 8667# lines 25 columns 132 vb 8668# 8669wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video, 8670 bel@, use=wy325-w, 8671 8672# 8673# lines 42 columns 80 8674# 8675wy325-42|wyse325-42|wyse-325 42 lines, 8676 lh@, lines#42, lw@, nlab@, 8677 pln@, rs3=\EwG\Ee)$<100>, use=wy325, 8678# 8679# lines 42 columns 132 8680# 8681wy325-42w|wyse325-42w|wyse-325 42 lines wide mode, 8682 lh@, lines#42, lw@, nlab@, 8683 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 8684# 8685# lines 42 columns 132 vb 8686# 8687wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell, 8688 bel@, use=wy325-w, 8689# 8690# lines 43 columns 80 8691# 8692wy325-43|wyse325-43|wyse-325 43 lines, 8693 lh@, lines#43, lw@, nlab@, 8694 pln@, use=wy325, 8695# 8696# lines 43 columns 132 8697# 8698wy325-43w|wyse325-43w|wyse-325 43 lines wide mode, 8699 lh@, lines#43, lw@, nlab@, 8700 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 8701# 8702# lines 43 columns 132 vb 8703# 8704wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell, 8705 bel@, use=wy325-w, 8706 8707# Wyse 370 -- 24 line screen with status line. 8708# 8709# The terminal may have to be set for 8 data bits and 2 stop 8710# bits for the arrow keys to work. 8711# 8712# If you change keyboards the terminal will send different 8713# escape sequences. 8714# The following definition is for the basic terminal without 8715# function keys. 8716# 8717# <u0> -> enter Tektronix 4010/4014 mode 8718# <u1> -> exit Tektronix 4010/4014 mode 8719# <u2> -> enter ASCII mode (from any ANSI mode) 8720# <u3> -> exit ASCII mode (goto native ANSI mode) 8721# <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode) 8722# <u5> -> exit Tek 4207 mode (goto native ANSI mode) 8723# 8724# Bug: The <op> capability resets attributes. 8725wy370-nk|wyse 370 without function keys, 8726 am, ccc, hs, mc5i, mir, msgr, xenl, xon, 8727 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80, 8728 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 8729 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 8730 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, 8731 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 8732 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 8733 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, 8734 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>, 8735 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, 8736 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>, 8737 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0, 8738 flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8, 8739 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH, 8740 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, 8741 ind=\n$<2>, 8742 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw, 8743 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>, 8744 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h, 8745 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i, 8746 mc5=\E[5i, 8747 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w, 8748 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, 8749 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l, 8750 rmkx=\E>, rmso=\E[27m, rmul=\E[24m, 8751 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>, 8752 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw, 8753 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 8754 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, 8755 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, 8756 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH, 8757 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B, 8758 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd, 8759# 8760# Function key set for the ASCII (wy-50 compatible) keyboard 8761# This is the default 370. 8762# 8763wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard, 8764 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 8765 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i, 8766 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 8767 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i, 8768 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, 8769 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP, 8770 knp=\E[U, kpp=\E[V, use=wy370-nk, 8771# 8772# Function key set for the VT-320 (and wy85) compatible keyboard 8773# 8774wy370-105k|Wyse 370 with 105 key keyboard, 8775 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 8776 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 8777 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 8778 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, 8779 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 8780 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~, 8781 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, 8782 use=wy370-nk, use=vt220+keypad, 8783# 8784# Function key set for the PC compatible keyboard 8785# 8786wy370-EPC|Wyse 370 with 102 key keyboard, 8787 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 8788 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~, 8789 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 8790 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 8791 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk, 8792# 8793# Wyse 370 with visual bell. 8794wy370-vb|Wyse 370 with visible bell, 8795 bel@, use=wy370, 8796# 8797# Wyse 370 in 132-column mode. 8798wy370-w|Wyse 370 in 132-column mode, 8799 cols#132, wsl#132, 8800 rs2=\E[35h\E[?3h$<70>, use=wy370, 8801# 8802# Wyse 370 in 132-column mode with visual bell. 8803wy370-wvb|Wyse 370 with visible bell 132-columns, 8804 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w, 8805wy370-rv|Wyse 370 reverse video, 8806 rs3=\E[32h\E[?5h, use=wy370, 8807# 8808# Wyse 99gt Tektronix 4010/4014 emulator, 8809# 8810wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator, 8811 am, os, 8812 cols#74, lines#35, 8813 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, 8814 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, 8815 cuu1=^K, ff=^L, 8816 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, 8817 home=^]7`x @\037, 8818 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, 8819 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h, 8820# 8821# Wyse 160 Tektronix 4010/4014 emulator, 8822# 8823wy160-tek|Wyse 160 Tektronix 4010/4014 emulator, 8824 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, 8825 home=^]8`g @\037, use=wy99gt-tek, 8826# 8827# Wyse 370 Tektronix 4010/4014 emulator, 8828# 8829wy370-tek|Wyse 370 Tektronix 4010/4014 emulator, 8830 am, os, 8831 cols#80, lines#36, 8832 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, 8833 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037, 8834 cuu1=^K, ff=^L, 8835 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, 8836 home=^]8g @\037, 8837 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, 8838 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K, 8839 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0, 8840 8841# Vendor-supplied Wyse entries end here. 8842 8843# 8844#TITLE: TERMINFO ENTRY WY520 8845#DATE: 8/5/93 8846# The WY520 terminfo is based on the WY285 entry published on the WYSE 8847# BBS with the addition of more function keys and special keys. 8848# 8849# rs1 -> set personality 8850# rs2 -> set number of columns 8851# rs3 -> set number of lines 8852# is1 -> select the proper font 8853# is2 -> do the initialization 8854# is3 -> If this string is empty then rs3 gets sent. 8855# 8856# Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard 8857# - The BS key is programmed to generate BS in smcup since 8858# is2 doesn't seem to work. 8859# - Remove and shift/Remove: delete a character 8860# - Insert : enter insert mode 8861# - Find : delete to end of file 8862# - Select : clear a line 8863# - F11, F12, F13: send default sequences (not ESC, BS, LF) 8864# - F14 : Home key 8865# - Bottom status line (host writable line) is used. 8866# - smkx,rmkx are removed because this would put the numeric 8867# keypad in Dec application mode which doesn't seem to work 8868# with SCO applications. 8869# 8870wy520|wyse520|wyse 520, 8871 am, hs, km, mc5i, mir, xenl, xon, 8872 cols#80, it#8, lines#24, wsl#80, 8873 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 8874 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 8875 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, 8876 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, 8877 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 8878 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 8879 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>, 8880 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~, 8881 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K, 8882 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, 8883 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, 8884 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, 8885 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h, 8886 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 8887 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~, 8888 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~, 8889 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 8890 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 8891 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 8892 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, 8893 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, 8894 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 8895 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, 8896 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m, 8897 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, 8898 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, 8899 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 8900 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, 8901 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m, 8902 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`, 8903 vpa=\E[%i%p1%dd, use=vt220+keypad, 8904# 8905# Wyse 520 with 24 data lines and status (terminal status) 8906wy520-24|wyse520-24|wyse 520 with 24 data lines, 8907 hs@, 8908 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, 8909 use=wy520, 8910# 8911# Wyse 520 with visual bell. 8912wy520-vb|wyse520-vb|wyse 520 with visible bell, 8913 flash=\E[30h\E\,\E[30l$<100>, use=wy520, 8914# 8915# Wyse 520 in 132-column mode. 8916wy520-w|wyse520-w|wyse 520 in 132-column mode, 8917 cols#132, wsl#132, 8918 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 8919 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520, 8920# 8921# Wyse 520 in 132-column mode with visual bell. 8922wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns, 8923 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w, 8924# 8925# 8926# Wyse 520 emulating a vt420 7 bit mode. 8927# The DEL key is programmed to generate BS in is2. 8928# With EPC keyboard. 8929# - 'End' key will clear till end of line on EPC keyboard 8930# - Shift/End : ignored. 8931# - Insert : enter insert mode. 8932# - Delete : delete a character (have to change interrupt character 8933# to CTRL-C: stty intr '^c') for it to work since the 8934# Delete key sends 7FH. 8935wy520-epc|wyse520-epc|wyse 520 with EPC keyboard, 8936 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~, 8937 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H, 8938 use=wy520, 8939# 8940# Wyse 520 with 24 data lines and status (terminal status) 8941# with EPC keyboard. 8942wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard, 8943 hs@, 8944 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, 8945 use=wy520-epc, 8946# 8947# Wyse 520 with visual bell. 8948wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard, 8949 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc, 8950# 8951# Wyse 520 in 132-column mode. 8952wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard, 8953 cols#132, wsl#132, 8954 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 8955 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc, 8956# 8957# Wyse 520 in 132-column mode with visual bell. 8958wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard, 8959 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w, 8960# 8961# Wyse 520 in 80-column, 36 lines 8962wy520-36|wyse520-36|wyse 520 with 36 data lines, 8963 hs@, 8964 lines#36, 8965 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, 8966 use=wy520, 8967# 8968# Wyse 520 in 80-column, 48 lines 8969wy520-48|wyse520-48|wyse 520 with 48 data lines, 8970 hs@, 8971 lines#48, 8972 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, 8973 use=wy520, 8974# 8975# Wyse 520 in 132-column, 36 lines 8976wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines, 8977 cols#132, wsl#132, 8978 rs2=\E[?3h, 8979 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, 8980 use=wy520-36, 8981# 8982# Wyse 520 in 132-column, 48 lines 8983wy520-48w|wyse520-48w|wyse 520 with 48 data lines, 8984 cols#132, wsl#132, 8985 rs2=\E[?3h, 8986 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, 8987 use=wy520-48, 8988# 8989# 8990# Wyse 520 in 80-column, 36 lines with EPC keyboard 8991wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard, 8992 hs@, 8993 lines#36, 8994 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, 8995 use=wy520-epc, 8996# 8997# Wyse 520 in 80-column, 48 lines with EPC keyboard 8998wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard, 8999 hs@, 9000 lines#48, 9001 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, 9002 use=wy520-epc, 9003# 9004# Wyse 520 in 132-column, 36 lines with EPC keyboard 9005wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard, 9006 cols#132, wsl#132, 9007 rs2=\E[?3h, 9008 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, 9009 use=wy520-36pc, 9010# 9011# Wyse 520 in 132-column, 48 lines with EPC keyboard 9012wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard, 9013 cols#132, wsl#132, 9014 rs2=\E[?3h, 9015 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, 9016 use=wy520-48pc, 9017 9018# From: John Gilmore <hoptoad!gnu@lll-crg.arpa> 9019# (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such 9020# file and we don't know what <hts> is -- esr) 9021wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on, 9022 OTbs, am, 9023 cols#80, it#8, lines#24, 9024 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 9025 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW, 9026 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J, 9027 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F, 9028 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O, 9029 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N, 9030 smul=^N, 9031 9032wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad, 9033 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=, 9034 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 9035 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>, 9036 use=wy75, 9037 9038# From: Eric Freudenthal <freudent@eric.ultra.nyu.edu> 9039wy100q|Wyse 100 for Quotron, 9040 OTbs, 9041 cols#80, lines#24, xmc#1, 9042 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L, 9043 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 9044 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@, 9045 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J, 9046 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr, 9047 9048#### Kermit terminal emulations 9049# 9050# Obsolete Kermit versions may be listed in the section describing obsolete 9051# non-ANSI terminal emulators later in the file. 9052# 9053 9054# KERMIT standard all versions. 9055# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. 9056# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) 9057# From: greg small <gts@populi.berkeley.edu> 9-25-84 9058kermit|standard kermit, 9059 OTbs, 9060 cols#80, lines#24, 9061 clear=\EE, cub1=^H, cuf1=\EC, 9062 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 9063 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n, 9064 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 9065kermit-am|standard kermit plus auto-margin, 9066 am, 9067 is2=K1 Standard Kermit plus Automatic Margins\n, 9068 use=kermit, 9069# IBMPC Kermit 1.2. 9070# Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does 9071# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of 9072# line). 9073# From: greg small <gts@populi.berkeley.edu> 8-30-84 9074pckermit|pckermit12|UCB IBMPC Kermit 1.2, 9075 am, 9076 lines#25, 9077 clear=\EH\EJ, ed@, el@, 9078 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit, 9079# IBMPC Kermit 1.20 9080# Cannot use line 25, now acts funny like ansi special scrolling region. 9081# Initialization must escape from that region by cursor position to line 24. 9082# Cannot use character insert because 1.20 goes crazy if insert at col 80. 9083# Does not use :am: because autowrap is lost when kermit dropped and restarted. 9084# From: greg small <gts@populi.berkeley.edu> 12-19-84 9085pckermit120|UCB IBMPC Kermit 1.20, 9086 it#8, lines#24, 9087 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I, 9088 il1=\EL, 9089 is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n, 9090 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit, 9091# MS-DOS Kermit 2.27 for the IBMPC 9092# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. 9093# Cannot use line 25, now acts funny like ansi special scrolling region. 9094# Initialization must escape from that region by cursor position to line 24. 9095# Does not use am: because autowrap is lost when kermit dropped and restarted. 9096# Reverse video for standout like H19. 9097# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) 9098# From: greg small <gts@populi.berkeley.edu> 3-17-85 9099msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC, 9100 OTbs, am@, 9101 cols#80, it#8, lines#24, 9102 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, 9103 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 9104 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK, 9105 home=\EH, ht=^I, il1=\EL, 9106 is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n, 9107 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek, 9108 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep, 9109# MS-DOS Kermit 2.27 with automatic margins 9110# From: greg small <gts@populi.berkeley.edu> 3-17-85 9111msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins, 9112 am, 9113 cvvis=\EO\Eq\EG\EvK5, 9114 is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n, 9115 use=msk227, 9116# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC 9117# Automatic margins now default. Use ansi <sgr> for highlights. 9118# Define function keys. 9119# (msk22714: removed obsolete ":kn#10:" -- esr) 9120# From: greg small <gts@populi.berkeley.edu> 3-17-85 9121msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC, 9122 am, 9123 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6, 9124 is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n, 9125 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, 9126 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m, 9127 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227, 9128# This was designed for a VT320 emulator, but it is probably a good start 9129# at support for the VT320 itself. 9130# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu. 9131# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr) 9132vt320-k3|MS-Kermit 3.00's vt320 emulation, 9133 am, eslok, hs, km, mir, msgr, xenl, 9134 cols#80, it#8, lines#49, pb#9600, vt#3, 9135 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9136 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 9137 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M, 9138 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9139 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9140 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 9141 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 9142 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 9143 flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l, 9144 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 9145 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 9146 is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD, 9147 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~, 9148 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 9149 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~, 9150 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8, 9151 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l, 9152 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 9153 rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~, 9154 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 9155 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 9156 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd, 9157# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991 9158# ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996 9159# (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr) 9160vt320-k311|dec vt320 series as defined by kermit 3.11, 9161 am, eslok, hs, mir, msgr, xenl, xon, 9162 cols#80, it#8, lines#24, vt#3, 9163 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9164 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 9165 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M, 9166 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9167 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9168 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 9169 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 9170 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, 9171 flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH, 9172 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED, 9173 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 9174 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 9175 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 9176 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 9177 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, 9178 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O, 9179 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 9180 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N, 9181 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, 9182 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, 9183 9184######## NON-ANSI TERMINAL EMULATIONS 9185# 9186 9187#### Avatar 9188# 9189# These entries attempt to describe Avatar, a terminal emulation used with 9190# MS-DOS bulletin-board systems. It was designed to give ANSI-like 9191# capabilities, but with cheaper (shorter) control sequences. Messy design, 9192# excessively dependent on PC idiosyncracies, but apparently rather popular 9193# in the BBS world. 9194# 9195# No color support. Avatar doesn't fit either of the Tektronix or HP color 9196# models that terminfo knows about. An Avatar color attribute is the 9197# low 7 bits of the IBM-PC display-memory attribute. Bletch. 9198# 9199# I wrote these entries while looking at the Avatar spec. I don't have 9200# the facilities to test them. Let me know if they work, or don't. 9201# 9202# Avatar escapes not used by these entries (because maybe you're smarter 9203# and more motivated than I am and can figure out how to wrap terminfo 9204# around some of them, and because they are weird enough to be funny): 9205# level 0: 9206# ^L -- clear window/reset current attribute to default 9207# ^V^A%p1%c -- set current color attribute, parameter decodes as follows: 9208# 9209# bit: 6 5 4 3 2 1 0 9210# | | | | | 9211# +---+---+ | +---+---+ 9212# | | | 9213# | | foreground color 9214# | foreground intensity 9215# background color 9216# level 0+: 9217# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines 9218# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines 9219# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1 9220# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1 9221# (^V^L and ^V^M set the current attribute as a side-effect.) 9222# ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes 9223# in the pattern, <c> the number of times the pattern 9224# should be repeated. If either value is 0, no-op. 9225# The pattern can contain Avatar console codes, 9226# including other ^V ^Y patterns. 9227# level 1: 9228# ^V^O -- clockwise mode on; turn print direction right each time you 9229# hit a window edge (yes, really). Turned off by CR 9230# ^V^P -- no-op 9231# ^V^Q%c -- query the driver 9232# ^V^R -- driver reset 9233# ^V^S -- Sound tone (PC-specific) 9234# ^V^T -- change highlight at current cursor poition to %c 9235# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b> 9236# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c 9237# -- define window 9238# 9239# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 9240# (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to 9241# tell ncurses that the corresponding highlights exist; it should use <sgr>, 9242# which is the only method that will actually work for multiple highlights.) 9243# 9244# Update by TD - 2004: half of this was inconsistent. Found documentation 9245# and repaired most of the damage. sgr0 is probably incorrect, but the 9246# available documentation gives no clues for a workable string. 9247avatar0|avatar terminal emulator level 0, 9248 am, bce, msgr, 9249 cols#80, it#8, lines#25, 9250 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D, 9251 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G, 9252 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap, 9253 rmacs@, rs2=^L, 9254 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;, 9255 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A, 9256 use=klone+acs, 9257# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 9258avatar0+|avatar terminal emulator level 0+, 9259 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0, 9260# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 9261avatar|avatar1|avatar terminal emulator level 1, 9262 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+, 9263 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+, 9264 9265#### RBcomm 9266# 9267# RBComm is a lean and mean terminal emulator written by the Interrupt List 9268# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early 9269# '90s), especially in the BBS world, and still has some loyal users due to 9270# its very small memory footprint and to a cute macro language. 9271rbcomm|IBM PC with RBcomm and EMACS keybindings, 9272 am, bw, mir, msgr, xenl, 9273 cols#80, it#8, lines#25, 9274 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9275 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 9276 cub1=^H, cud1=^C, cuf1=^B, 9277 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W, 9278 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I, 9279 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m, 9280 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H, 9281 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED, 9282 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=, 9283 rmir=^], rmkx=\E>, rmso=^U, rmul=^U, 9284 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m, 9285 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T, 9286rbcomm-nam|IBM PC with RBcomm without autowrap, 9287 am@, 9288 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, 9289 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H, 9290 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm, 9291rbcomm-w|IBM PC with RBcomm in 132 column mode, 9292 cols#132, 9293 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, 9294 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H, 9295 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm, 9296 9297######## LCD DISPLAYS 9298# 9299 9300#### Matrix Orbital 9301# from: Eric Z. Ayers (eric@ale.org) 9302# 9303# Matrix Orbital 20x4 LCD display 9304# Command Character is 0xFE (decimal 254, octal 376) 9305# 9306# On this device, cursor addressability isn't possible. The LCD expects: 9307# 0xfe G <col> <row> 9308# for cup: %p1 == row and %p2 is column 9309# 9310# This line: 9311# cup=\376G%p2%c%p1%c 9312# LOOKS like it will work, but sometimes only one of the two numbers is sent. 9313# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'. 9314# 9315# Alas, there is no cursor upline capability on this display. 9316# 9317# These entries add some 'sanity stuff' to the clear function. That is, it 9318# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping, 9319# and turns off the cursor blinking and stuff like that. 9320# 9321# NOTE: calling 'beep' turns on the backlight (bell) 9322# NOTE: calling 'flash' turns it on and back off (visual bell) 9323# 9324MtxOrb|Generic Matrix Orbital LCD display, 9325 bel=\376B^A, clear=\376X\376C\376R\376K\376T, 9326 cnorm=\376K\376T, cub1=\376L, cuf1=\376M, 9327 flash=\376B\001$<200>\376F, home=\376H, 9328MtxOrb204|20x4 Matrix Orbital LCD display, 9329 cols#20, lines#4, use=MtxOrb, 9330MtxOrb162|16x2 Matrix Orbital LCD display, 9331 cols#16, lines#2, use=MtxOrb, 9332# The end 9333 9334######## OLDER TERMINAL TYPES 9335# 9336# This section is devoted to older commercial terminal brands that are now 9337# discontinued, but known to be still in use or represented by emulations. 9338# 9339 9340#### AT&T (att, tty) 9341# 9342# This section also includes Teletype-branded VDTs. 9343# 9344# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now 9345# Boundless Technologies); for details, see the header comment on the ADDS 9346# section. 9347# 9348# These are AT&T's official terminfo entries. All-caps aliases have been 9349# removed. 9350# 9351att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode, 9352 am, eo, mir, msgr, xon, 9353 cols#80, it#8, lines#24, 9354 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H, 9355 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9356 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 9357 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 9358 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, 9359 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J, 9360 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 9361 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r, 9362 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r, 9363 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r, 9364 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H, 9365 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 9366 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h, 9367 smso=\E[7m, 9368att2350|AT&T 2350 Video Information Terminal 80 column mode, 9369 mc0@, mc4@, mc5@, use=att2300, 9370 9371# Must setup RETURN KEY - CR, REC'VD LF - INDEX. 9372# Seems upward compatible with vt100, plus ins/del line/char. 9373# On sgr, the protection parameter is ignored. 9374# No check is made to make sure that only 3 parameters are output. 9375# standout= reverse + half-intensity = 3 | 5. 9376# bold= reverse + underline = 2 | 3. 9377# note that half-bright blinking doesn't look different from normal blinking. 9378# NOTE:you must program the function keys first, label second! 9379# (att4410: a BSD entry has been seen with the following capabilities: 9380# <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>, 9381# <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr) 9382att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1, 9383 am, hs, mir, msgr, xon, 9384 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 9385 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9386 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M, 9387 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 9388 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m, 9389 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I, 9390 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0, 9391 is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW, 9392 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 9393 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, 9394 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, 9395 ll=\E[24H, nel=^M^J, 9396 pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s, 9397 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, 9398 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, 9399 sc=\E7, 9400 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9401 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, 9402 tsl=\E7\E[25;%p1%{1}%+%dH, 9403 9404att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1, 9405 cols#132, wsl#132, 9406 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1, 9407 9408att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2, 9409 OTbs, 9410 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s, 9411 use=att5410v1, 9412 9413att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode, 9414 cols#132, wsl#132, 9415 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410, 9416 9417# 5410 in terms of a vt100 9418# (v5410: added <rmam>/<smam> based on init string -- esr) 9419v5410|att5410 in terms of a vt100, 9420 am, mir, msgr, xon, 9421 cols#80, it#8, lines#24, vt#3, 9422 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9423 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 9424 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 9425 cub1=^H, cud1=^J, cuf1=\E[C$<2>, 9426 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P, 9427 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 9428 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@, 9429 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 9430 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, 9431 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, 9432 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 9433 sc=\E7, 9434 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, 9435 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 9436 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 9437 use=vt100+fnkeys, 9438 9439# 9440# Teletype Model 5420 -- A souped up 5410, with multiple windows, 9441# even! the 5420 has three modes: scroll, window or page mode 9442# this terminfo should work in scroll or window mode, but doesn't 9443# take advantage of any of the differences between them. 9444# 9445# Has memory below (2 lines!) 9446# 3 pages of memory (plus some spare) 9447# The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>, 9448# <hpa>, <hts> would work for these, but these work in both scroll and window 9449# mode... Unset insert character so insert mode works 9450# <is1> sets 80 column mode, 9451# <is2> escape sequence: 9452# 1) turn off all fonts 9453# 2) function keys off, keyboard lock off, control display off, 9454# insert mode off, erasure mode off, 9455# 3) full duplex, monitor mode off, send graphics off, nl on lf off 9456# 4) reset origin mode 9457# 5) set line wraparound 9458# 6) exit erasure mode, positional attribute mode, and erasure extent mode 9459# 7) clear margins 9460# 8) program ENTER to transmit ^J, 9461# We use \212 to program the ^J because a bare ^J will get translated by 9462# UNIX into a CR/LF. The enter key is needed for AT&T uOMS. 9463# 1 2 3 4 5 6 7 8 9464# <is3> set screen color to black, 9465# No representation in terminfo for the delete word key: kdw1=\Ed 9466# Key capabilities assume the power-up send sequence... 9467# This <rmcup> is not strictly necessary, but it helps maximize 9468# memory usefulness: <rmcup=\Ez>, 9469# Alternate sgr0: <sgr0=\E[m\EW^O>, 9470# Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>, 9471# smkx programs the SYS PF keys to send a set sequence. 9472# It also sets up labels f1, f2, ..., f8, and sends edit keys. 9473# This string causes them to send the strings <kf1>-<kf8> 9474# when pressed in SYS PF mode. 9475# (att4415: I added <rmam>/<smam> based on the init string -- esr) 9476att4415|tty5420|att5420|AT&T 4415/5420 80 cols, 9477 OTbs, db, mir, xon, 9478 lh#2, lm#78, lw#8, nlab#8, wsl#55, 9479 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD, 9480 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx, 9481 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP, 9482 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD, 9483 flash=\E[?5h$<200>\E[?5l, home=\E[x, 9484 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@, 9485 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>, 9486 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212, 9487 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M, 9488 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd, 9489 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 9490 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, 9491 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, 9492 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i, 9493 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt, 9494 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s, 9495 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, 9496 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l, 9497 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|, 9498 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9499 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h, 9500 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g, 9501 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, 9502 use=att4410, 9503 9504att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols, 9505 cols#132, lm#54, wsl#97, 9506 is1=\E[?3h$<100>, use=att4415, 9507 9508att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv, 9509 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415, 9510 9511att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv, 9512 cols#132, lm#54, wsl#97, 9513 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h, 9514 use=att4415, 9515 9516# Note that this mode permits programming USER PF KEYS and labels 9517# However, when you program user pf labels you have to reselect 9518# user pf keys to make them appear! 9519att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels, 9520 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, 9521 pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s, 9522 pln=\E[%p1%d;0;0;1q%p2%:-16.16s, 9523 9524att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels, 9525 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 9526 use=att4415, 9527 9528att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels, 9529 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 9530 use=att4415-rv, 9531 9532att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels, 9533 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 9534 use=att4415-w, 9535 9536att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels, 9537 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 9538 use=att4415-w-rv, 9539 9540att5420_2|AT&T 5420 model 2 80 cols, 9541 am, db, hs, mir, msgr, xon, 9542 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, 9543 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9544 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j, 9545 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9546 cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, 9547 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j, 9548 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 9549 dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K, 9550 el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, 9551 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 9552 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE, 9553 invis=\E[8m, 9554 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, 9555 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, 9556 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, 9557 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe, 9558 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, 9559 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, 9560 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, 9561 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i, 9562 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J, 9563 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~, 9564 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8, 9565 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j, 9566 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, 9567 sc=\E7, 9568 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9569 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~, 9570 smso=\E[7m, smul=\E[4m, tbc=\E[3g, 9571 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, 9572att5420_2-w|AT&T 5420 model 2 in 132 column mode, 9573 cols#132, 9574 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, 9575 use=att5420_2, 9576 9577att4418|att5418|AT&T 5418 80 cols, 9578 am, xon, 9579 cols#80, lines#24, 9580 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9581 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, 9582 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 9583 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 9584 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, 9585 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, 9586 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J, 9587 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@, 9588 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h, 9589 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I, 9590 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E, 9591 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j, 9592 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8, 9593 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7, 9594 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, 9595att4418-w|att5418-w|AT&T 5418 132 cols, 9596 cols#132, 9597 is1=\E[?3h, use=att5418, 9598 9599att4420|tty4420|teletype 4420, 9600 OTbs, da, db, eo, msgr, ul, xon, 9601 cols#80, lines#24, lm#72, 9602 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC, 9603 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, 9604 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s, 9605 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC, 9606 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH, 9607 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET, 9608 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~, 9609 rmul=\EZ, smdc@, smso=\E}, smul=\E\\, 9610 9611# The following is a terminfo entry for the Teletype 4424 9612# asynchronous keyboard-display terminal. It supports 9613# the vi editor. The terminal must be set up as follows, 9614# 9615# HIGHLIGHT DEFINITION 3-TONE 9616# DISPLAY FUNCTION GROUP III 9617# 9618# The second entry below provides limited (a la adm3a) 9619# operation under GROUP II. 9620# 9621# This must be used with DISPLAY FUNCTION GROUP I or III 9622# and HIGHLIGHT DEFINITION 3-TONE 9623# The terminal has either bold or blink, depending on options 9624# 9625# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr) 9626att4424|tty4424|teletype 4424, 9627 OTbs, am, xon, 9628 cols#80, lines#24, 9629 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9630 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M, 9631 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9632 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC, 9633 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA, 9634 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM, 9635 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 9636 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h, 9637 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 9638 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 9639 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~, 9640 rmul=\EZ, 9641 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m, 9642 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\, 9643 tbc=\EF, 9644 9645att4424-1|tty4424-1|teletype 4424 in display function group I, 9646 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@, 9647 use=att4424, 9648 9649# This entry is not one of AT&T's official ones, it was translated from the 9650# 4.4BSD termcap file. The highlight strings are different from att4424. 9651# I have no idea why this is -- older firmware version, maybe? 9652# The following two lines are the comment originally attached to the entry: 9653# This entry appears to avoid the top line - I have no idea why. 9654# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp 9655att4424m|tty4424m|teletype 4424M, 9656 am, da, db, mir, 9657 cols#80, it#8, lines#23, 9658 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 9659 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP, 9660 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>, 9661 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B, 9662 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 9663 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m, 9664 sgr0=\E[m, smso=\E[7m, smul=\E[4m, 9665 9666# The Teletype 5425 is really version 2 of the Teletype 5420. It 9667# is quite similar, except for some minor differences. No page 9668# mode, for example, so all of the <cup> sequences used above have 9669# to change back to what's being used for the 5410. Many of the 9670# option settings have changed their numbering as well. 9671# 9672# This has been tested on a preliminary model. 9673# 9674# (att5425: added <rmam>/<smam> based on the init string -- esr) 9675att5425|tty5425|att4425|AT&T 4425/5425, 9676 am, da, db, hs, mir, msgr, xenl, xon, 9677 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, 9678 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9679 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 9680 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M, 9681 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9682 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9683 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 9684 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 9685 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J, 9686 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 9687 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, 9688 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 9689 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE, 9690 invis=\E[8m, is1=\E<\E[?3l$<100>, 9691 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212, 9692 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J, 9693 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 9694 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, 9695 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, 9696 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T, 9697 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i, 9698 nel=^M^J, 9699 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 9700 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8, 9701 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l, 9702 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|, 9703 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, 9704 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9705 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 9706 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m, 9707 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH, 9708 vpa=\E[%p1%{1}%+%dd, 9709 9710att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels, 9711 smkx=\E[21;1j\E[25;4j\Eent, use=att4425, 9712 9713att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode, 9714 cols#132, lm#54, wsl#97, 9715 is1=\E[?3h$<100>, use=tty5425, 9716 9717# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:. 9718# I also added <rmam>/<smam> -- esr) 9719att4426|tty4426|teletype 4426S, 9720 am, da, db, xon, 9721 cols#80, lines#24, lm#48, 9722 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9723 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V, 9724 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 9725 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 9726 cuu=\E[%p1%dA, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP, 9727 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H, 9728 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^, 9729 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS, 9730 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, 9731 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 9732 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, 9733 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H, 9734 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT, 9735 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, 9736 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0, 9737 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g, 9738 vpa=\E[%p1%dd, 9739 9740# Terminfo entry for the AT&T 510 A Personal Terminal 9741# Function keys 9 - 16 are available only after the 9742# screen labeled (soft keys/action blocks) are labeled. Function key 9743# 9 corresponds to the leftmost touch target on the screen, 9744# function key 16 corresponds to the rightmost. 9745# 9746# This entry is based on one done by Ernie Rice at Summit, NJ and 9747# changed by Anne Gallup, Skokie, IL, ttrdc!anne 9748att510a|bct510a|AT&T 510A Personal Terminal, 9749 am, mir, msgr, xenl, xon, 9750 cols#80, lh#2, lines#24, lw#7, nlab#8, 9751 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, 9752 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 9753 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, 9754 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, 9755 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 9756 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, 9757 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, 9758 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I, 9759 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l, 9760 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, 9761 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, 9762 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, 9763 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, 9764 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, 9765 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE, 9766 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, 9767 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7, 9768 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;, 9769 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m, 9770 smul=\E[4m, tbc=\E[3g, 9771 9772# Terminfo entry for the AT&T 510 D Personal Terminal 9773# Function keys 9 through 16 are accessed by bringing up the 9774# system blocks. 9775# Function key 9 corresponds to the leftmost touch target on the screen, 9776# function key 16 corresponds to the rightmost. 9777# 9778# There are problems with soft key labeling. These are due to 9779# strangenesses in the native terminal that are impossible to 9780# describe in a terminfo. 9781att510d|bct510d|AT&T 510D Personal Terminal, 9782 am, da, db, mir, msgr, xenl, xon, 9783 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8, 9784 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, 9785 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 9786 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD, 9787 cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, 9788 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 9789 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P, 9790 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, 9791 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, 9792 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 9793 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, 9794 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, 9795 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 9796 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, 9797 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, 9798 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, 9799 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, 9800 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE, 9801 pln=\E[%p1%dp%p2%:-16s, rc=\E8, 9802 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, 9803 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|, 9804 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|, 9805 rs2=\E[5;0|, sc=\E7, 9806 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9807 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h, 9808 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m, 9809 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, 9810 9811# (att500: I merged this with the att513 entry, att500 just used att513 -- esr) 9812att500|att513|AT&T 513 using page mode, 9813 am, chts, mir, msgr, xenl, xon, 9814 cols#80, lh#2, lines#24, lw#8, nlab#8, 9815 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, 9816 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 9817 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M, 9818 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9819 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9820 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 9821 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m, 9822 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 9823 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, 9824 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 9825 indn=\E[%p1%dE, invis=\E[8m, 9826 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l, 9827 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, 9828 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, 9829 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK, 9830 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, 9831 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY, 9832 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw, 9833 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, 9834 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 9835 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent, 9836 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, 9837 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm, 9838 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi, 9839 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, 9840 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, 9841 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB, 9842 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2, 9843 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i, 9844 nel=\EE, 9845 pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s, 9846 pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s, 9847 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s, 9848 pln=\E[%p1%dp%p2%:-16s, rc=\E8, 9849 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, 9850 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l, 9851 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m, 9852 rmul=\E[m, 9853 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l, 9854 rs2=\E[5;0|, sc=\E7, 9855 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9856 sgr0=\E[m\017, smacs=^N, smir=\E[4h, 9857 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m, 9858 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, 9859 9860# 01-07-88 9861# printer must be set to EMUL ANSI to accept ESC codes 9862# <cuu1> stops at top margin 9863# <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font 9864# and alt font ascii,wrap on,tabs cleared 9865# <is2> disables newline on LF,Emphasized off 9866# The <u0> capability sets form length 9867att5310|att5320|AT&T Model 53210 or 5320 matrix printer, 9868 xhpa, xvpa, 9869 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10, 9870 orhi#100, orl#12, orvi#72, 9871 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;, 9872 cr=^M, 9873 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;, 9874 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM, 9875 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r, 9876 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;, 9877 rshm=\E[m, 9878 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;, 9879 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds, 9880 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m, 9881 u0=\E[%p1%dt, vpa=\E[%p1%dd, 9882 9883# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL 9884# The following SET-UP modes are assumed for normal operation: 9885# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL 9886# Other SET-UP modes may be set for operator convenience or communication 9887# requirements. This termcap description is for the Resident Terminal Mode. 9888# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 9889# The BRL entry also said: UNSAFE :ll=\E[70H: 9890att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs, 9891 am, xon, 9892 cols#88, it#8, lines#70, vt#3, 9893 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 9894 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 9895 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 9896 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 9897 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, 9898 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 9899 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT, 9900 rs1=\Ec, sc=\E7, 9901 9902# 5620 terminfo (2.0 or later ROMS with char attributes) 9903# The following SET-UP modes are assumed for normal operation: 9904# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR 9905# Other SET-UP modes may be set for operator convenience or communication 9906# requirements. This termcap description is for Resident Terminal Mode. No 9907# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 9908# assumptions: <ind> (scroll forward one line) is only done at screen bottom 9909# Be aware that older versions of the dmd have a firmware bug that affects 9910# parameter defaulting; for this terminal, the 0 in \E[0m is not optional. 9911# <msgr> is from an otherwise inferior BRL for this terminal. That entry 9912# also has <ll>=\E[70H commented out and marked unsafe. 9913# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>. 9914att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns, 9915 OTbs, am, msgr, npc, xon, 9916 cols#88, it#8, lines#70, 9917 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H, 9918 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 9919 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 9920 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@, 9921 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 9922 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, 9923 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J, 9924 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T, 9925 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, 9926 sgr0=\E[0m, smso=\E[7m, smul=\E[4m, 9927att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer, 9928 lines#24, use=att5620, 9929att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer, 9930 lines#34, use=att5620, 9931# 5620 layer running the "S" system's downloaded graphics handler: 9932att5620-s|tty5620-s|layer|vitty|5620 S layer, 9933 OTbs, OTpt, am, 9934 cols#80, it#8, lines#72, 9935 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, 9936 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED, 9937 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J, 9938 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 9939 kll=\E[70;1H, 9940 9941# Entries for <kf15> thru <kf28> refer to the shifted system pf keys. 9942# 9943# Entries for <kf29> thru <kf46> refer to the alternate keypad mode 9944# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER 9945att605|AT&T 605 80 column 102key keyboard, 9946 am, eo, xon, 9947 cols#80, lines#24, lw#8, nlab#8, wsl#80, 9948 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9949 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 9950 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, 9951 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 9952 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 9953 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 9954 il1=\E[L, ind=^J, invis=\E[8m, 9955 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017, 9956 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J, 9957 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 9958 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq, 9959 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, 9960 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, 9961 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, 9962 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, 9963 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, 9964 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, 9965 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, 9966 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, 9967 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@, 9968 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H, 9969 mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 9970 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 9971 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 9972 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, 9973 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016, 9974 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, 9975 tsl=\E7\E[25;%i%p1%dx, 9976att605-pc|ATT 605 in pc term mode, 9977 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 9978 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, 9979 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z, 9980 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 9981 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N, 9982 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, 9983 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I, 9984 rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g, 9985 xonc=e, use=att605, 9986att605-w|AT&T 605-w 132 column 102 key keyboard, 9987 cols#132, wsl#132, 9988 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, 9989 use=att605, 9990# (att610: I added <rmam>/<smam> based on the init string. I also 9991# added <indn> and <rin> because the BSD file says the att615s have them, 9992# and the 615 is like a 610 with a big keyboard, and most of their other 9993# smart terminals support the same sequence -- esr) 9994att610|AT&T 610; 80 column; 98key keyboard, 9995 am, eslok, hs, mir, msgr, xenl, xon, 9996 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 9997 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9998 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9999 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 10000 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10001 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 10002 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10003 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 10004 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 10005 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, 10006 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 10007 indn=\E[%p1%dS, invis=\E[8m, 10008 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0, 10009 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, 10010 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10011 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, 10012 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, 10013 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 10014 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i, 10015 nel=\EE, 10016 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 10017 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 10018 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 10019 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7, 10020 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10021 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 10022 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx, 10023att610-w|AT&T 610; 132 column; 98key keyboard, 10024 cols#132, wsl#132, 10025 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 10026 use=att610, 10027 10028att610-103k|AT&T 610; 80 column; 103key keyboard, 10029 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, 10030 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, 10031 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, 10032 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, 10033 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, 10034 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 10035 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M, 10036 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx, 10037 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl, 10038 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V, 10039 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq, 10040 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo, 10041 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610, 10042att610-103k-w|AT&T 610; 132 column; 103key keyboard, 10043 cols#132, wsl#132, 10044 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 10045 use=att610-103k, 10046att615|AT&T 615; 80 column; 98key keyboard, 10047 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, 10048 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, 10049 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, 10050 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, 10051 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, 10052 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, 10053 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610, 10054att615-w|AT&T 615; 132 column; 98key keyboard, 10055 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, 10056 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, 10057 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, 10058 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, 10059 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, 10060 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, 10061 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w, 10062att615-103k|AT&T 615; 80 column; 103key keyboard, 10063 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k, 10064att615-103k-w|AT&T 615; 132 column; 103key keyboard, 10065 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w, 10066# (att620: I added <rmam>/<smam> based on the init string and 10067# <rin>/<indn> from a BSD termcap -- esr) 10068att620|AT&T 620; 80 column; 98key keyboard, 10069 am, eslok, hs, mir, msgr, xenl, xon, 10070 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 10071 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10072 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 10073 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 10074 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10075 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 10076 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10077 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 10078 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 10079 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, 10080 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 10081 indn=\E[%p1%dS, invis=\E[8m, 10082 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h, 10083 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, 10084 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10085 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, 10086 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, 10087 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI, 10088 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, 10089 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ, 10090 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, 10091 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf, 10092 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, 10093 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 10094 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H, 10095 mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 10096 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 10097 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 10098 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l, 10099 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, 10100 rs2=\Ec\E[?3l, sc=\E7, 10101 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10102 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h, 10103 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, 10104 tsl=\E7\E[25;%i%p1%dx, 10105att620-w|AT&T 620; 132 column; 98key keyboard, 10106 cols#132, wsl#132, 10107 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 10108 use=att620, 10109att620-103k|AT&T 620; 80 column; 103key keyboard, 10110 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, 10111 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, 10112 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, 10113 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, 10114 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, 10115 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 10116 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M, 10117 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@, 10118 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@, 10119 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@, 10120 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@, 10121 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, 10122 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, 10123 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, 10124 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, 10125 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620, 10126 10127att620-103k-w|AT&T 620; 132 column; 103key keyboard, 10128 cols#132, wsl#132, 10129 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 10130 use=att620-103k, 10131 10132# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal 10133# The following SETUP modes are assumed for normal operation: 10134# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF 10135# Font_Size=Large Non-Layers_Window_Cols=80 10136# Non-Layers_Window_Rows=60 10137# Other SETUP modes may be set for operator convenience or communication 10138# requirements. Some capabilities assume a printer attached to the Aux EIA 10139# port. This termcap description is for the Fixed Non-Layers Window. No 10140# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 10141# (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr) 10142att630|AT&T 630 windowing terminal, 10143 OTbs, am, da, db, mir, msgr, npc, xon, 10144 cols#80, it#8, lines#60, lm#0, 10145 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M, 10146 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 10147 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 10148 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 10149 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 10150 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 10151 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m, 10152 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, 10153 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M, 10154 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, 10155 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy, 10156 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~, 10157 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i, 10158 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, 10159 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m, 10160 rmul=\E[m, rs2=\Ec, sc=\E7, 10161 sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m, 10162 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, 10163att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines, 10164 lines#24, use=att630, 10165 10166# This is the att700 entry for 700 native emulation of the AT&T 700 10167# terminal. Comments are relative to changes from the 605V2 entry and 10168# att730 on which the entry is based. Comments show the terminfo 10169# capability name, termcap name, and description. 10170# 10171# Here is what's going onm in the init string: 10172# ESC [ 50;4| set 700 native mode (really is 605) 10173# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line) 10174# ESC [ 53;0| set GenFlow to Xon/Xoff 10175# ESC [ 8 ;0| set CR on NL 10176# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h) 10177# ESC [ ? 4 l jump scroll 10178# ESC [ ? 5 l/h video: normal (l); reverse (h) 10179# ESC [ ?13 l Labels on 10180# ESC [ ?15 l parity check = no 10181# ESC [ 13 l monitor mode off 10182# ESC [ 20 l LF on NL (not CRLF on NL) 10183# ESC [ ? 7 h autowrap on 10184# ESC [ 12 h local echo off 10185# ESC ( B GO = ASCII 10186# ESC ) 0 G1 = Special Char & Line Drawing 10187# ESC [ ? 31 l Set 7 bit controls 10188# 10189# Note: Most terminals, especially the 600 family use Reverse Video for 10190# standout mode. DEC also uses reverse video. The VT100 uses bold in addition 10191# Assume we should stay with reverse video for 70.. However, the 605V2 exits 10192# standout mode with \E[m (all normal attributes). The 730 entry simply 10193# exits reverse video which would leave other current attributes intact. It 10194# was assumed the 730 entry to be more correct so rmso has changed. The 10195# 605V2 has no sequences to turn individual attributes off, thus its setting 10196# and the rmso/smso settings from the 730. 10197# 10198# Note: For the same reason as above in rmso I changed exit under-score mode 10199# to specifically turn off underscore, rather than return to all normal 10200# attributes 10201# 10202# Note: The following pkey_xmit is taken from the 605V2 which contained the 10203# capability as pfxl. It was changed here to pfx since pfxl 10204# will only compile successfully with Unix 4.0 tic. Also note that pfx only 10205# allows strings to be parameters and label values must be programmed as 10206# constant strings. Supposedly the pfxl of Version 4.0 allows both labels 10207# and strings to be parameters. The 605V2 pfx entry should be examined later 10208# in this regard. For reference the 730 pfxl entry is shown here for comparison 10209# 730 pfx entry: 10210# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s 10211# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s, 10212# 10213# (for 4.0 tic) 10214# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, 10215# 10216# (for <4.0 tic) 10217# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, 10218# 10219# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9 10220# 10221# Port1 Interface 10222# 10223# modular 10 pin Connector 10224# Left side Right side 10225# Pin 1 2 3 4 5 6 7 8 9 10 10226# 10227# Key (notch) at bottom 10228# 10229# Pin 1 DSR 10230# 3 DCD 10231# 4 DTR 10232# 5 Sig Ground 10233# 6 RD 10234# 7 SD 10235# 8 CTS 10236# 9 RTS 10237# 10 Frame Ground 10238# 10239# The manual is 189 pages and is loaded with details about the escape codes, 10240# etc..... Available from AT&T CIC 800-432-6600... 10241# ask for Document number 999-300-660.. 10242# 10243att700|AT&T 700 24x80 column display w/102key keyboard, 10244 am, eslok, hs, mir, msgr, xenl, xon, 10245 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 10246 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10247 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 10248 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 10249 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10250 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 10251 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10252 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 10253 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 10254 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4, 10255 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 10256 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, 10257 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017, 10258 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, 10259 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 10260 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, 10261 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, 10262 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, 10263 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, 10264 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq, 10265 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu, 10266 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu, 10267 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, 10268 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, 10269 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 10270 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H, 10271 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 10272 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, 10273 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, 10274 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, 10275 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m, 10276 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7, 10277 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10278 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m, 10279 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g, 10280 tsl=\E7\E[99;%i%p1%dx, 10281 10282# This entry was modified 3/13/90 by JWE. 10283# fixes include additions of <enacs>, correcting <rep>, and modification 10284# of <kHOM>. (See comments below) 10285# att730 has status line of 80 chars 10286# These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>, 10287# the <kf25> and up keys are used for shifted system Fkeys 10288# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is 10289# currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1 10290# and 122 key keyboards, the 730's translation is \E[2J. For consistency 10291# <kHOM> has been commented out. The user can uncomment <kHOM> if using the 10292# 102, 102+1, or 122 key keyboards 10293# kHOM=\E[2J, 10294# (att730: I added <rmam>/<smam> based on the init string -- esr) 10295att730|AT&T 730 windowing terminal, 10296 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon, 10297 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80, 10298 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10299 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 10300 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 10301 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10302 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 10303 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10304 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 10305 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 10306 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8, 10307 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 10308 ind=\ED, invis=\E[8m, 10309 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B, 10310 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, 10311 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10312 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, 10313 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw, 10314 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{, 10315 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD, 10316 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH, 10317 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ, 10318 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf, 10319 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ, 10320 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg, 10321 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 10322 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T, 10323 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 10324 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s, 10325 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s, 10326 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, 10327 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, 10328 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m, 10329 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7, 10330 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10331 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 10332 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h, 10333 swidm=\E#6, tsl=\E7\E[;%i%p1%dx, 10334att730-41|730MTG-41|AT&T 730-41 windowing terminal Version, 10335 lines#41, use=att730, 10336att730-24|730MTG-24|AT&T 730-24 windowing terminal Version, 10337 lines#24, use=att730, 10338att730r|730MTGr|AT&T 730 rev video windowing terminal Version, 10339 flash=\E[?5l$<200>\E[?5h, 10340 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, 10341 use=att730, 10342att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version, 10343 lines#41, use=att730r, 10344att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version, 10345 lines#24, use=att730r, 10346 10347# The following represents the screen layout along with the associated 10348# bezel buttons for the 5430/pt505 terminal. The "kf" designations do 10349# not appear on the screen but are shown to reference the bezel buttons. 10350# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate 10351# position relative to the screen. 10352# 10353# 10354# 10355# +----------------------------------------------------------------+ 10356# | | 10357# XXXX | kf0 kf24 | XXXX 10358# | | 10359# | | 10360# XXXX | kf1 kf23 | XXXX 10361# | | 10362# | | 10363# XXXX | kf2 kf22 | XXXX 10364# | | 10365# | | 10366# XXXX | kf3 kf21 | XXXX 10367# | | 10368# | | 10369# XXXX | kf4 kf20 | XXXX 10370# | | 10371# | | 10372# XXXX | kf5 kf19 | XXXX 10373# | | 10374# | | 10375# XXXX | kf6 kf18 | XXXX 10376# | | 10377# | | 10378# XXXX | | XXXX 10379# | | 10380# | | 10381# +----------------------------------------------------------------+ 10382# 10383# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX 10384# 10385# Note: XXXX represents the screen buttons 10386# CMD REDRAW 10387# 10388# MAIL 10389# 10390# version 1 note: 10391# The character string sent by key 'kf26' may be user programmable 10392# to send either \E[16s, or \E[26s. 10393# The character string sent by key 'krfr' may be user programmable 10394# to send either \E[17s, or \E[27s. 10395# 10396# Depression of the "CMD" key sends \E! (kcmd) 10397# Depression of the "MAIL" key sends \E[26s (kf26) 10398# "REDRAW" same as "REFRESH" (krfr) 10399# 10400# "kf" functions adds carriage return to output string if terminal is in 10401# 'new line' mode. 10402# 10403# The following are functions not covered in the table above: 10404# 10405# Set keyboard character (SKC): \EPn1;Pn2w 10406# Pn1= 0 Back Space key 10407# Pn1= 1 Break key 10408# Pn2= Program char (hex) 10409# 10410# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t 10411# Pn1= Window number (1-39) 10412# Pn2-Pn5= Y;X;Y;X coordinates 10413# 10414# Screen Selection (SSL): \E[Pnu 10415# Pn= Window number 10416# 10417# Set Terminal Modes (SM): \E[Pnh 10418# Pn= 3 Graphics mode 10419# Pn= > Cursor blink 10420# Pn= < Enter new line mode 10421# Pn= = Enter reverse insert/replace mode 10422# Pn= ? Enter no scroll mode 10423# 10424# Reset Terminal Mode (RM): \E[Pnl 10425# Pn= 3 Exit graphics mode 10426# Pn= > Exit cursor blink 10427# Pn= < Exit new line mode 10428# Pn= = Exit reverse insert/replace mode 10429# Pn= ? Exit no scroll mode 10430# 10431# Screen Status Report (SSR): \E[Pnp 10432# Pn= 0 Request current window number 10433# Pn= 1 Request current window dimensions 10434# 10435# Device Status Report (DSR): \E[6n Request cursor position 10436# 10437# Call Status Report (CSR): \E[Pnv 10438# Pn= 0 Call failed 10439# Pn= 1 Call successful 10440# 10441# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string 10442# Pn1= Button number to be loaded 10443# Pn2= Character count of "string" 10444# Pn3= Key mode being loaded: 10445# 0= Unshifted 10446# 1= Shifted 10447# 2= Control 10448# String= Text string (15 chars max) 10449# 10450# Screen Number Report (SNR): \E[Pnp 10451# Pn= Screen number 10452# 10453# Screen Dimension Report (SDR): \E[Pn1;Pn2r 10454# Pn1= Number of rows available in window 10455# Pn2= Number of columns available in window 10456# 10457# Cursor Position Report (CPR): \E[Pn1;Pn2R 10458# Pn1= "Y" Position of cursor 10459# Pn2= "X" Position of cursor 10460# 10461# Request Answer Back (RAB): \E[c 10462# 10463# Answer Back Response (ABR): \E[?;*;30;VSV 10464# *= 0 No printer available 10465# *= 2 Printer available 10466# V= Software version number 10467# SV= Software sub version number 10468# (printer-available field not documented in v1) 10469# 10470# Screen Alignment Aid: \En 10471# 10472# Bell (lower pitch): \E[x 10473# 10474# Dial Phone Number: \EPdstring\ 10475# string= Phone number to be dialed 10476# 10477# Set Phone Labels: \EPpstring\ 10478# string= Label for phone buttons 10479# 10480# Set Clock: \EPchour;minute;second\ 10481# 10482# Position Clock: \EPsY;X\ 10483# Y= "Y" coordinate 10484# X= "X" coordinate 10485# 10486# Delete Clock: \Epr\ 10487# 10488# Programming The Function Buttons: \EPfPn;string\ 10489# Pn= Button number (00-06, 18-24) 10490# (kf00-kf06, kf18-kf24) 10491# string= Text to sent on button depression 10492# 10493# The following in version 2 only: 10494# 10495# Request For Local Directory Data: \EPp12;\ 10496# 10497# Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\ 10498# 10499# Request for Local Directory Data in print format: \EPp13;\ 10500# 10501# Enable 'Prt on Line' mode: \022 (DC2) 10502# 10503# Disable 'Prt on Line' mode: \024 (DC4) 10504# 10505 10506# 05-Aug-86: 10507# The following Terminfo entry describes functions which are supported by 10508# the AT&T 5430/pt505 terminal software version 2 and later. 10509att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal, 10510 am, xon, 10511 cols#80, it#8, lines#24, 10512 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10513 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, 10514 cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D, 10515 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 10516 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10517 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 10518 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I, 10519 il=\E[%p1%dL, il1=\E[L, ind=^J, 10520 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l, 10521 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10522 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s, 10523 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s, 10524 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s, 10525 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s, 10526 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, 10527 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m, 10528 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m, 10529 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m, 10530 10531# The following Terminfo entry describes functions which are supported by 10532# the AT&T 5430/pt505 terminal software version 1. 10533att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines, 10534 lines#24, 10535 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505, 10536tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines, 10537 lines#22, use=att505, 10538# 10539#### ------------------ TERMINFO FILE CAN BE SPLIT HERE --------------------- 10540# This cut mark helps make life less painful for people running ncurses tic 10541# on machines with relatively little RAM. The file can be broken in half here 10542# cleanly and compiled in sections -- no `use' references cross this cut 10543# going forward. 10544# 10545 10546#### Ampex (Dialogue) 10547# 10548# Yes, these are the same people who are better-known for making audio- and 10549# videotape. I'm told they are located in Redwood City, CA. 10550# 10551 10552# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981 10553# (ampex80: some capabilities merged in from SCO's entry -- esr) 10554ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80, 10555 OTbs, am, bw, ul, 10556 cols#80, it#8, lines#24, 10557 bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J, 10558 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 10559 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1, 10560 ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em, 10561 smso=\Ej, smul=\El, tbc=\E3, 10562# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote: 10563ampex175|ampex d175, 10564 am, 10565 cols#80, lines#24, 10566 bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 10567 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 10568 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J, 10569 is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 10570 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K, 10571 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El, 10572# No backspace key in the main QWERTY cluster. Fortunately, it has a 10573# NEWLINE/PAGE key just above RETURN that sends a strange single-character 10574# code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS 10575# mode), this key can be used as the erase key; I find I like this. Because 10576# some people and some systems may not, there is another termcap ("ampex175") 10577# that suppresses this little eccentricity by omitting the relevant capability. 10578ampex175-b|ampex d175 using left arrow for erase, 10579 kbs=^_, use=ampex175, 10580# From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu> 10581# (ampex210: removed obsolete ":kn#10:" -- esr) 10582ampex210|a210|ampex a210, 10583 OTbs, am, hs, xenl, 10584 cols#80, it#8, lines#24, xmc#1, 10585 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L, 10586 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 10587 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX, 10588 fsl=\E.2, home=^^, ht=^I, ich1=\EQ, 10589 if=/usr/share/tabset/std, il1=\EE, invis@, 10590 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H, 10591 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, 10592 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, 10593 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^, 10594 tsl=\E.0\Eg\E}\Ef, use=adm+sgr, 10595# (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis> 10596# from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>, 10597# and moved the padding to be *after* the caps -- esr) 10598ampex219|ampex-219|amp219|Ampex with Automargins, 10599 hs, xenl, 10600 cols#80, it#8, lines#24, 10601 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z, 10602 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M, 10603 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, 10604 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, 10605 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>, 10606 el=\E[K$<3>, home=\E[H, ht=^I, ind=^J, 10607 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 10608 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~, 10609 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~, 10610 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, 10611 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>, 10612 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h, 10613 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>, 10614ampex219w|ampex-219w|amp219w|Ampex 132 cols, 10615 cols#132, lines#24, 10616 bel=^G, cr=^M, cud1=^J, ind=^J, 10617 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219, 10618# (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr) 10619ampex232|ampex-232|Ampex Model 232, 10620 am, 10621 cols#80, lines#24, xmc#1, 10622 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V, 10623 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 10624 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET, 10625 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>, 10626 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L, 10627 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, 10628 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, 10629 kf9=^AI\r, khome=^^, use=adm+sgr, 10630# (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr) 10631ampex232w|Ampex Model 232 / 132 columns, 10632 cols#132, lines#24, 10633 is2=\E\034Eg\El, use=ampex232, 10634 10635#### Ann Arbor (aa) 10636# 10637# Ann Arbor made dream terminals for hackers -- large screen sizes and huge 10638# numbers of function keys. At least some used monitors in portrait mode, 10639# allowing up to 76-character screen heights! They were reachable at: 10640# 10641# Ann Arbor Terminals 10642# 6175 Jackson Road 10643# Ann Arbor, MI 48103 10644# (313)-663-8000 10645# 10646# But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor 10647# can't be found on the Web; I fear they're long dead. R.I.P. 10648# 10649 10650 10651# Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs. 10652# Highly modified 6/22 by Mike O'Brien. 10653# split out into several for the various screen sizes by dave-yost@rand 10654# Modifications made 3/82 by Mark Horton 10655# Modified by Tom Quarles at UCB for greater efficiency and more diversity 10656# status line moved to top of screen, <flash> removed 5/82 10657# Some unknown person at SCO then hacked the init strings to make them more 10658# efficient. 10659# 10660# assumes the following setup: 10661# A menu: 0000 1010 0001 0000 10662# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 10663# C menu: 56 66 0 0 9600 0110 1100 10664# D menu: 0110 1001 1 0 10665# 10666# Briefly, the settings are for the following modes: 10667# (values are for bit set/clear with * indicating our preference 10668# and the value used to test these termcaps) 10669# Note that many of these settings are irrelevent to the terminfo 10670# and are just set to the default mode of the terminal as shipped 10671# by the factory. 10672# 10673# A menu: 0000 1010 0001 0000 10674# Block/underline cursor* 10675# blinking/nonblinking cursor* 10676# key click/no key click* 10677# bell/no bell at column 72* 10678# 10679# key pad is cursor control*/key pad is numeric 10680# return and line feed/return for <cr> key * 10681# repeat after .5 sec*/no repeat 10682# repeat at 25/15 chars per sec. * 10683# 10684# hold data until pause pressed/process data unless pause pressed* 10685# slow scroll/no slow scroll* 10686# Hold in area/don't hold in area* 10687# functions keys have default*/function keys disabled on powerup 10688# 10689# show/don't show position of cursor during page transmit* 10690# unused 10691# unused 10692# unused 10693# 10694# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 10695# Baud rate (9600*) 10696# 10697# 2 bits of parity - 00=odd,01=even*,10=space,11=mark 10698# 1 stop bit*/2 stop bits 10699# parity error detection off*/on 10700# 10701# keyboard local/on line* 10702# half/full duplex* 10703# disable/do not disable keyboard after data transmission* 10704# 10705# transmit entire page/stop transmission at cursor* 10706# transfer/do not transfer protected characters* 10707# transmit all characters/transmit only selected characters* 10708# transmit all selected areas/transmit only 1 selected area* 10709# 10710# transmit/do not transmit line separators to host* 10711# transmit/do not transmit page tab stops tabs to host* 10712# transmit/do not transmit column tab stop tabs to host* 10713# transmit/do not transmit graphics control (underline,inverse..)* 10714# 10715# enable*/disable auto XON/XOFF control 10716# require/do not require receipt of a DC1 from host after each LF* 10717# pause key acts as a meta key/pause key is pause* 10718# unused 10719# 10720# unused 10721# unused 10722# unused 10723# unused 10724# 10725# XON character (17*) 10726# XOFF character (19*) 10727# 10728# C menu: 56 66 0 0 9600 0110 1100 10729# number of lines to print data on (printer) (56*) 10730# 10731# number of lines on a sheet of paper (printer) (66*) 10732# 10733# left margin (printer) (0*) 10734# 10735# number of pad chars on new line to printer (0*) 10736# 10737# printer baud rate (9600*) 10738# 10739# printer parity: 00=odd,01=even*,10=space,11=mark 10740# printer stop bits: 2*/1 10741# print/do not print guarded areas* 10742# 10743# new line is: 01=LF,10=CR,11=CRLF* 10744# unused 10745# unused 10746# 10747# D menu: 0110 1001 1 0 10748# LF is newline/LF is down one line, same column* 10749# wrap to preceding line if move left from col 1*/don't wrap 10750# wrap to next line if move right from col 80*/don't wrap 10751# backspace is/is not destructive* 10752# 10753# display*/ignore DEL character 10754# display will not/will scroll* 10755# page/column tab stops* 10756# erase everything*/erase unprotected only 10757# 10758# editing extent: 0=display,1=line*,2=field,3=area 10759# 10760# unused 10761# 10762 10763annarbor4080|aa4080|ann arbor 4080, 10764 OTbs, am, 10765 cols#80, lines#40, 10766 bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_, 10767 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c, 10768 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H, 10769 kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P, 10770 10771# Strange Ann Arbor terminal from BRL 10772aas1901|Ann Arbor K4080 w/S1901 mod, 10773 am, 10774 cols#80, lines#40, 10775 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N, 10776 home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c, 10777 nel=^M^J, 10778 10779# If you're using the GNU termcap library, add 10780# :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp: 10781# to these capabilities. This is the nonstandard GNU termcap scrolling 10782# capability, arguments are: 10783# 1. Total number of lines on the screen. 10784# 2. Number of lines above desired scroll region. 10785# 3. Number of lines below (outside of) desired scroll region. 10786# 4. Total number of lines on the screen, the same as the first parameter. 10787# The generic Ann Arbor entry is the only one that uses this. 10788aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly), 10789 OTbs, am, km, mc5i, mir, xon, 10790 cols#80, it#8, 10791 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 10792 clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H, 10793 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C, 10794 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10795 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 10796 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, 10797 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL, 10798 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8, 10799 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z, 10800 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 10801 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK, 10802 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP, 10803 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT, 10804 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC, 10805 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI, 10806 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i, 10807 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8, 10808 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, 10809 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\, 10810 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7, 10811 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, 10812 sgr0=\E[m, 10813 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\, 10814 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[2g, 10815 vpa=\E[%p1%{1}%+%dd, 10816 10817aaa+rv|ann arbor ambassador in reverse video, 10818 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m, 10819 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m, 10820 rs1=\E[H\E[7m\E[J$<156>, 10821 sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, 10822 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m, 10823# Ambassador with the DEC option, for partial vt100 compatibility. 10824aaa+dec|ann arbor ambassador in dec vt100 mode, 10825 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}, 10826 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N, 10827 sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;, 10828 smacs=^O, 10829aaa-18|ann arbor ambassador/18 lines, 10830 lines#18, 10831 is2=\E7\E[60;0;0;18p\E8, 10832 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p, 10833 use=aaa+unk, 10834aaa-18-rv|ann arbor ambassador/18 lines+reverse video, 10835 use=aaa+rv, use=aaa-18, 10836aaa-20|ann arbor ambassador/20 lines, 10837 lines#20, 10838 is2=\E7\E[60;0;0;20p\E8, 10839 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p, 10840 use=aaa+unk, 10841aaa-22|ann arbor ambassador/22 lines, 10842 lines#22, 10843 is2=\E7\E[60;0;0;22p\E8, 10844 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p, 10845 use=aaa+unk, 10846aaa-24|ann arbor ambassador/24 lines, 10847 lines#24, 10848 is2=\E7\E[60;0;0;24p\E8, 10849 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p, 10850 use=aaa+unk, 10851aaa-24-rv|ann arbor ambassador/24 lines+reverse video, 10852 use=aaa+rv, use=aaa-24, 10853aaa-26|ann arbor ambassador/26 lines, 10854 lines#26, 10855 is2=\E7\E[60;0;0;26p\E8, 10856 rmcup=\E[60;0;0;26p\E[26;1H\E[K, 10857 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk, 10858aaa-28|ann arbor ambassador/28 lines, 10859 lines#28, 10860 is2=\E7\E[60;0;0;28p\E8, 10861 rmcup=\E[60;0;0;28p\E[28;1H\E[K, 10862 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk, 10863aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status, 10864 eslok, hs, 10865 lines#29, 10866 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K, 10867 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8, 10868 rmcup=\E[60;1;0;30p\E[29;1H\E[K, 10869 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K, 10870 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk, 10871aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video, 10872 use=aaa+rv, use=aaa-30-s, 10873aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context, 10874 rmcup=\E[60;1;0;30p\E[59;1H\E[K, 10875 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s, 10876aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video, 10877 rmcup=\E[60;1;0;30p\E[59;1H\E[K, 10878 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv, 10879aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines, 10880 lines#30, 10881 is2=\E7\E[60;0;0;30p\E8, 10882 rmcup=\E[60;0;0;30p\E[30;1H\E[K, 10883 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk, 10884aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video, 10885 use=aaa+rv, use=aaa-30, 10886aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context, 10887 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p, 10888 use=aaa-30, 10889aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context, 10890 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p, 10891 use=aaa+rv, use=aaa-30, 10892aaa-36|ann arbor ambassador/36 lines, 10893 lines#36, 10894 is2=\E7\E[60;0;0;36p\E8, 10895 rmcup=\E[60;0;0;36p\E[36;1H\E[K, 10896 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk, 10897aaa-36-rv|ann arbor ambassador/36 lines+reverse video, 10898 use=aaa+rv, use=aaa-36, 10899aaa-40|ann arbor ambassador/40 lines, 10900 lines#40, 10901 is2=\E7\E[60;0;0;40p\E8, 10902 rmcup=\E[60;0;0;40p\E[40;1H\E[K, 10903 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk, 10904aaa-40-rv|ann arbor ambassador/40 lines+reverse video, 10905 use=aaa+rv, use=aaa-40, 10906aaa-48|ann arbor ambassador/48 lines, 10907 lines#48, 10908 is2=\E7\E[60;0;0;48p\E8, 10909 rmcup=\E[60;0;0;48p\E[48;1H\E[K, 10910 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk, 10911aaa-48-rv|ann arbor ambassador/48 lines+reverse video, 10912 use=aaa+rv, use=aaa-48, 10913aaa-60-s|ann arbor ambassador/59 lines+status, 10914 eslok, hs, 10915 lines#59, 10916 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K, 10917 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8, 10918 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk, 10919aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video, 10920 use=aaa+rv, use=aaa-60-s, 10921aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video, 10922 use=aaa+dec, use=aaa+rv, use=aaa-60-s, 10923aaa-60|ann arbor ambassador/60 lines, 10924 lines#60, 10925 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8, 10926 use=aaa+unk, 10927aaa-60-rv|ann arbor ambassador/60 lines+reverse video, 10928 use=aaa+rv, use=aaa-60, 10929aaa-db|ann arbor ambassador 30/destructive backspace, 10930 OTbs@, 10931 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30, 10932 10933guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols, 10934 lines#33, 10935 flash=\E[>59h$<100>\E[>59l, 10936 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l, 10937 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk, 10938guru+rv|guru changes for reverse video, 10939 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h, 10940guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video, 10941 use=guru+rv, use=guru-33, 10942guru+s|guru status line, 10943 eslok, hs, 10944 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l, 10945 rmcup=\E[255;1p\E[255;1H\E[K, smcup=, 10946 tsl=\E[>51h\E[1;%p1%dH\E[2K, 10947guru-nctxt|guru with no saved context, 10948 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru, 10949guru-s|guru-33-s|ann arbor guru/33 lines+status, 10950 lines#32, 10951 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J, 10952 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 10953guru-24|ann arbor guru 24 lines, 10954 cols#80, lines#24, 10955 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p, 10956 use=guru+unk, 10957guru-44|ann arbor guru 44 lines, 10958 cols#97, lines#44, 10959 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p, 10960 use=guru+unk, 10961guru-44-s|ann arbor guru/44 lines+status, 10962 lines#43, 10963 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J, 10964 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 10965guru-76|guru with 76 lines by 89 cols, 10966 cols#89, lines#76, 10967 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p, 10968 use=guru+unk, 10969guru-76-s|ann arbor guru/76 lines+status, 10970 cols#89, lines#75, 10971 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J, 10972 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 10973guru-76-lp|guru-lp|guru with page bigger than line printer, 10974 cols#134, lines#76, 10975 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p, 10976 use=guru+unk, 10977guru-76-w|guru 76 lines by 178 cols, 10978 cols#178, lines#76, 10979 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p, 10980 use=guru+unk, 10981guru-76-w-s|ann arbor guru/76 lines+status+wide, 10982 cols#178, lines#75, 10983 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J, 10984 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 10985guru-76-wm|guru 76 lines by 178 cols with 255 cols memory, 10986 cols#178, lines#76, 10987 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p, 10988 use=guru+unk, 10989aaa-rv-unk|ann arbor unknown type, 10990 lh#0, lw#0, nlab#0, 10991 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m, 10992 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m, 10993 rs1=\E[H\E[7m\E[J, 10994 sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, 10995 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m, 10996 10997#### Applied Digital Data Systems (adds) 10998# 10999# ADDS itself is long gone. ADDS was bought by NCR, and the same group made 11000# ADDS and NCR terminals. When AT&T and NCR merged, the engineering for 11001# terminals was merged again. Then AT&T sold the terminal business to 11002# SunRiver, which later changed its name to Boundless Technologies. The 11003# engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there 11004# as of early 1995) are at: 11005# 11006# Boundless Technologies 11007# 100 Marcus Boulevard 11008# Hauppauge, NY 11788-3762 11009# Vox: (800)-231-5445 11010# Fax: (516)-342-7378 11011# Web: http://boundless.com 11012# 11013# Their voice mail used to describe the place as "SunRiver (formerly ADDS)". 11014# In 1995 Boundless acquired DEC's terminals business. 11015# 11016 11017# Regent: lowest common denominator, works on all regents. 11018# (regent: renamed ":bc:" to ":le:" -- esr) 11019regent|Adds Regent Series, 11020 OTbs, am, 11021 cols#80, lines#24, 11022 bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z, 11023 home=\EY\s\s, ind=^J, ll=^A, 11024# Regent 100 has a bug where if computer sends escape when user is holding 11025# down shift key it gets confused, so we avoid escape. 11026regent100|Adds Regent 100, 11027 xmc#1, 11028 bel=^G, 11029 cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c, 11030 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, 11031 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, 11032 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, 11033 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent, 11034regent20|Adds Regent 20, 11035 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK, 11036 use=regent, 11037regent25|Adds Regent 25, 11038 bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A, 11039 use=regent20, 11040regent40|Adds Regent 40, 11041 xmc#1, 11042 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r, 11043 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r, 11044 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, 11045 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P, 11046 smul=\E0`, use=regent25, 11047regent40+|Adds Regent 40+, 11048 is2=\EB, use=regent40, 11049regent60|regent200|Adds Regent 60, 11050 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF, 11051 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV, 11052 use=regent40+, 11053# From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981 11054# (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr) 11055viewpoint|addsviewpoint|adds viewpoint, 11056 OTbs, am, 11057 cols#80, lines#24, 11058 bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J, 11059 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, 11060 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>, 11061 ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, 11062 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A, 11063 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N, 11064# Some viewpoints have bad ROMs that foo up on ^O 11065screwpoint|adds viewpoint with ^O bug, 11066 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint, 11067 11068# From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92 11069# The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs. 11070# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000, 11071# underline=01100000, rev=01010000, blink=01000010,dim=01000001, 11072# invis=01000100 and %c is the logical or of desired attributes. 11073# There is also a `tag bit' enabling attributes, set by \E) and unset by \E(. 11074# 11075# Update by TD - 2004: 11076# Adapted from 11077# http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt 11078# 11079# COMMANDS ASCII CODE 11080# 11081# Address, Absolute ESC,=,row,column 11082# Beep BEL 11083# Aux Port Enable ESC,@ 11084# Aux Port Disable ESC,A 11085# Backspace BS 11086# Cursor back BS 11087# Cursor down LF 11088# Cursor forward FF 11089# Cursor home RS 11090# Cursor up VT 11091# Cursor supress ETB 11092# Cursor enable CAN 11093# Erase to end of line ESC,T 11094# Erase to end of page ESC,Y 11095# Erase screen SUB 11096# Keyboard lock SI 11097# Keyboard unlock SO 11098# Read current cursor position ESC,? 11099# Set Attribute ESC,0,x (see below for values of x) 11100# Tag bit reset ESC,( 11101# Tag bit set ESC,) 11102# Transparent Print on ESC,3 11103# Transparent Print off ESC,4 11104# 11105# 11106# ATTRIBUTES 11107# 11108# Normal @ 0100 11109# Half Intensity A 0101 11110# Blinking B 0102 11111# Half Intensity Blinking C 0103 11112# Reverse Video P 0120 11113# Reverse Video Half Intensity Q 0121 11114# Reverse Video Blinking R 0122 11115# Reverse Video Half Intensity 11116# Blinking S 0123 11117# Underlined ` 0140 11118# Underlined Half Intensity a 0141 11119# Underlined Blinking b 0142 11120# Underlined Half Intensity 11121# Blinking c 0143 11122# Video suppress D 0104 11123vp3a+|viewpoint3a+|adds viewpoint 3a+, 11124 am, bw, 11125 cols#80, it#8, lines#24, 11126 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M, 11127 cub1=^H, cud1=^J, cuf1=^L, 11128 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E), 11129 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E), 11130 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 11131 nel=^M^J, rev=\E0P\E), rmso=\E(, 11132 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;, 11133 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E), 11134vp60|viewpoint60|addsvp60|adds viewpoint60, 11135 use=regent40, 11136# 11137# adds viewpoint 90 - from cornell 11138# Note: emacs sends ei occasionally to insure the terminal is out of 11139# insert mode. This unfortunately puts the viewpoint90 IN insert 11140# mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also, 11141# - :ei=:im=: must be present in the termcap translation.) 11142# - <xhp> indicates glitch that attributes stick to location 11143# - <msgr> means it's safe to move in standout mode 11144# - <clear=\EG\Ek>: clears screen and visual attributes without affecting 11145# the status line 11146# Function key and label capabilities merged in from SCO. 11147vp90|viewpoint90|adds viewpoint 90, 11148 OTbs, bw, msgr, xhp, 11149 cols#80, lines#24, 11150 clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F, 11151 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE, 11152 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I, 11153 ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J, 11154 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r, 11155 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r, 11156 kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2, 11157 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, 11158 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV, 11159 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV, 11160# Note: if return acts weird on a980, check internal switch #2 11161# on the top chip on the CONTROL pc board. 11162adds980|a980|adds consul 980, 11163 OTbs, am, 11164 cols#80, lines#24, 11165 bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J, 11166 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d, 11167 dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1, 11168 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, 11169 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N, 11170 11171#### C. Itoh Electronics 11172# 11173# As of 1995 these people no longer make terminals (they're still in the 11174# printer business). Their terminals were all clones of the DEC VT series. 11175# They're located in Orange County, CA. 11176# 11177 11178# CIT 80 - vt-52 emulator, the termcap has been modified to remove 11179# the delay times and do an auto tab set rather than the indirect 11180# file used in vt100. 11181cit80|cit-80|citoh 80, 11182 OTbs, am, 11183 cols#80, lines#24, 11184 clear=\E[H\EJ, cr=^M, cub1=^H, cuf1=\E[C, 11185 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L, 11186 ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 11187 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=, 11188# From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985 11189# (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr) 11190cit101|citc|C.itoh fast vt100, 11191 OTbs, am, xenl, 11192 cols#80, lines#24, 11193 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cuf1=\E[C, 11194 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U, 11195 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, 11196 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L, 11197 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g, 11198 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 11199 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 11200 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, 11201 smul=\E[4m, 11202# CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL 11203# The following termcap entry was created from the Callan cd100 entry. The 11204# last two lines (with the capabilities in caps) are used by RM-cobol to allow 11205# full selection of combinations of reverse video, underline, and blink. 11206# (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\ 11207# f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\ 11208# :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr) 11209cit101e|C. Itoh CIT-101e, 11210 OTbs, OTpt, am, mir, msgr, 11211 cols#80, it#8, lines#24, 11212 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr, 11213 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, 11214 cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J, 11215 el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L, 11216 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT, 11217 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl, 11218 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l, 11219 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h, 11220 smkx=\E=, smso=\E[7m, smul=\E[4m, 11221# From: David S. Lawyer, June 1997: 11222# The CIT 101-e was made in Japan in 1983-4 and imported by CIE 11223# Terminals in Irvine, CA. It was part of CITOH Electronics. In the 11224# late 1980's CIT Terminals went out of business. 11225# There is no need to use the initialization string is=... (by invoking 11226# tset or setterm etc.) provided that the terminal has been manually set 11227# up (and the setup saved with ^S) to be compatible with this termcap. To be 11228# compatible it should be in ANSI mode (not VT52). A set-up that 11229# works is to set all the manually setable stuff to factory defaults 11230# by pressing ^D in set-up mode. Then increse the brighness with the 11231# up-arrow key since the factory default will likely be dim on an old 11232# terminal. Then change any options you want (provided that they are 11233# compatible with the termcap). For my terminal I set: Screen 11234# Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver: 11235# on. I also set up mine for parity (but you may not need it). Then 11236# save the setup with ^S. 11237# (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr) 11238cit101e-rv|Citoh CIT-101e (sets reverse video), 11239 am, eo, mir, msgr, xenl, xon, 11240 cols#80, it#8, lines#24, 11241 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 11242 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M, 11243 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 11244 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 11245 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11246 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 11247 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>, 11248 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 11249 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, 11250 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H, 11251 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 11252 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, 11253 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l, 11254 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7, 11255 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h, 11256 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, 11257 u7=\E[6n, u8=\E[?6c, u9=\E[c, 11258cit101e-n|CIT-101e w/o am, 11259 am@, 11260 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, 11261 use=cit101e, 11262cit101e-132|CIT-101e with 132 cols, 11263 cols#132, 11264 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e, 11265cit101e-n132|CIT-101e with 132 cols w/o am, 11266 am@, 11267 cols#132, 11268 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, 11269 use=cit101e, 11270# CIE Terminals CIT-500 from BRL 11271# The following SET-UP modes are assumed for normal operation: 11272# GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF 11273# AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES 11274# DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF 11275# Other SET-UP modes may be set for operator convenience or communication 11276# requirements. 11277# Hardware tabs are assumed to be set every 8 columns; they can be set up 11278# by the "reset", "tset", or "tabs" utilities. No delays are specified; use 11279# "stty ixon -ixany" to enable DC3/DC1 flow control! 11280# (cit500: I added <rmam>/<smam> based on the init string -- esr) 11281cit500|CIE Terminals CIT-500, 11282 OTbs, OTpt, mir, msgr, xon, 11283 OTkn#10, cols#80, it#8, lines#64, vt#3, 11284 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 11285 clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 11286 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 11287 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 11288 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 11289 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, 11290 il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD, 11291 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M, 11292 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, 11293 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ, 11294 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1, 11295 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18, 11296 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m, 11297 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, 11298 rmso=\E[m, rmul=\E[m, 11299 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>, 11300 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, 11301 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 11302 11303# C. Itoh printers begin here 11304citoh|ci8510|8510|c.itoh 8510a, 11305 cols#80, it#8, 11306 bold=\E!, cub1@, 11307 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073., 11308 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY, 11309 smul=\EX, use=lpr, 11310citoh-pica|citoh in pica, 11311 is1=\EN, use=citoh, 11312citoh-elite|citoh in elite, 11313 cols#96, 11314 is1=\EE, 11315 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089., 11316 use=citoh, 11317citoh-comp|citoh in compressed, 11318 cols#136, 11319 is1=\EQ, 11320 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129., 11321 use=citoh, 11322# citoh has infinite cols because we don't want lp ever inserting \n\t**. 11323citoh-prop|citoh-ps|ips|citoh in proportional spacing mode, 11324 cols#32767, 11325 is1=\EP, use=citoh, 11326citoh-6lpi|citoh in 6 lines per inch mode, 11327 is3=\EA, use=citoh, 11328citoh-8lpi|citoh in 8 lines per inch mode, 11329 lines#88, 11330 is3=\EB, use=citoh, 11331 11332#### Control Data (cdc) 11333# 11334 11335cdc456|cdc 456 terminal, 11336 OTbs, am, 11337 cols#80, lines#24, 11338 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 11339 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X, 11340 el=^V, home=^Y, il1=\EL, ind=^J, 11341 11342# Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick) 11343cdc721|CDC Viking, 11344 OTbs, am, 11345 cols#80, lines#24, 11346 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, 11347 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I, 11348 kcuu1=^W, khome=^Y, 11349cdc721ll|CDC Vikingll, 11350 OTbs, am, 11351 cols#132, lines#24, 11352 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, 11353 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I, 11354 kcuu1=^W, khome=^Y, 11355# (cdc752: the BRL entry had :ll=\E1 ^Z: commented out 11356cdc752|CDC 752, 11357 OTbs, am, bw, xhp, 11358 cols#80, lines#24, 11359 bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 11360 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V, 11361 home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017, 11362# CDC 756 11363# The following switch/key settings are assumed for normal operation: 11364# 96 chars SCROLL FULL duplex not BLOCK 11365# Other switches may be set according to communication requirements. 11366# Insert/delete-character cannot be used, as the whole display is affected. 11367# "so" & "se" are commented out until jove handles "sg" correctly. 11368cdc756|CDC 756, 11369 OTbs, am, bw, 11370 OTkn#10, cols#80, lines#24, 11371 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 11372 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, 11373 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J, 11374 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI, 11375 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, 11376 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y, 11377 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4, 11378 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z, 11379 rs1=\031\030\002\003\017, 11380# 11381# CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL. 11382# 11383# Part of the long initialization string defines the "DOWN" key to the left 11384# of the tab key to send an ESC. The real ESC key is positioned way out 11385# in right field. 11386# 11387# The termcap won't work in 132 column mode due to the way it it moves the 11388# cursor. Termcap doesn't have the capability (as far as I could tell) to 11389# handle the 721 in 132 column mode. 11390# 11391# (cdc721: changed :ri: to :sr: -- esr) 11392cdc721-esc|Control Data 721, 11393 OTbs, OTpt, am, bw, msgr, xon, 11394 OTkn#10, cols#80, it#8, lines#30, 11395 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z, 11396 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W, 11397 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW, 11398 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[, 11399 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o, 11400 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q, 11401 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x, 11402 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D, 11403 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^], 11404 sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk, 11405 smso=^^D, smul=^\, tbc=^^^RY, 11406 11407#### Getronics 11408# 11409# Getronics is a Dutch electronics company that at one time was called 11410# `Geveke' and made async terminals; but (according to the company itself!) 11411# they've lost all their documentation on the command set. The hardware 11412# documentation suggests the terminals were actually manufactured by a 11413# Taiwanese electronics company named Cal-Comp. There are known 11414# to have been at least two models, the 33 and the 50. 11415# 11416 11417# The 50 seems to be a top end vt220 clone, with the addition of a higher 11418# screen resolution, a larger screen, at least 1 page of memory above and 11419# below the screen, apparently pages of memory right and left of the screen 11420# which can be panned, and about 75 function keys (15 function keys x normal, 11421# shift, control, func A, func B). It also has more setup possibilities than 11422# the vt220. The monitor case is dated November 1978 and the keyboard case is 11423# May 1982. 11424# 11425# The vt100 emulation works as is. The entry below describes the rather 11426# non-conformant (but more featureful) ANSI mode. 11427# 11428# From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995 11429visa50|geveke visa 50 terminal in ansi 80 character mode, 11430 bw, mir, msgr, 11431 cols#80, lines#25, 11432 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G, 11433 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, 11434 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 11435 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 11436 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11437 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM, 11438 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H, 11439 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 11440 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, 11441 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h, 11442 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS, 11443 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, 11444 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002, 11445 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007, 11446 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char, 11447 lf3=A insert line, lf4=A delete line, lf5=A clear, 11448 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line, 11449 lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l, 11450 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m, 11451 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h, 11452 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, 11453 vpa=\E[%i%p1%dd, 11454 11455#### Human Designed Systems (Concept) 11456# 11457# Human Designed Systems 11458# 400 Fehley Drive 11459# King of Prussia, PA 19406 11460# Vox: (610)-277-8300 11461# Fax: (610)-275-5739 11462# Net: support@hds.com 11463# 11464# John Martin <john@hds.com> is their termcap expert. They're mostly out of 11465# the character-terminal business now (1995) and making X terminals. In 11466# particular, the whole `Concept' line described here was discontinued long 11467# ago. 11468# 11469 11470# From: <vax135!hpk> Sat Jun 27 07:41:20 1981 11471# Extensive changes to c108 by arpavax:eric Feb 1982 11472# Some unknown person at SCO then translated it to terminfo. 11473# 11474# There seem to be a number of different versions of the C108 PROMS 11475# (with bug fixes in its Z-80 program). 11476# 11477# The first one that we had would lock out the keyboard of you 11478# sent lots of short lines (like /usr/dict/words) at 9600 baud. 11479# Try that on your C108 and see if it sends a ^S when you type it. 11480# If so, you have an old version of the PROMs. 11481# 11482# You should configure the C108 to send ^S/^Q before running this. 11483# It is much faster (at 9600 baud) than the c100 because the delays 11484# are not fixed. 11485# new status line display entries for c108-8p: 11486# <is3> - init str #3 - setup term for status display - 11487# set programmer mode, select window 2, define window at last 11488# line of memory, set bkgnd stat mesg there, select window 0. 11489# 11490# <tsl> - to status line - select window 2, home cursor, erase to 11491# end-of-window, 1/2 bright on, goto(line#0, col#?) 11492# 11493# <fsl> - from status line - 1/2 bright off, select window 0 11494# 11495# <dsl> - disable status display - set bkgnd status mesg with 11496# illegal window # 11497# 11498# There are probably more function keys that should be added but 11499# I don't know what they are. 11500# 11501# No delays needed on c108 because of ^S/^Q handshaking 11502# 11503c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages, 11504 is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n, 11505 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p, 11506c108-4p|concept108-4p|concept 108 w/4 pages, 11507 OTbs, eslok, hs, xon, 11508 pb@, 11509 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M, 11510 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c, 11511 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s, 11512 ind=^J, is1=\EK\E!\E F, 11513 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n, 11514 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!, 11515 smcup=\EU\Ev 8p\Ep\r\E\025, 11516 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100, 11517c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video, 11518 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r, 11519 use=c108-rv-4p, 11520c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video, 11521 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE, 11522 use=c108-4p, 11523c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode, 11524 cols#132, 11525 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n, 11526 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p, 11527 11528# Concept 100: 11529# These have only window relative cursor addressing, not screen 11530# relative. To get it to work right here, smcup/rmcup (which 11531# were invented for the concept) lock you into a one page 11532# window for screen style programs. 11533# 11534# To get out of the one page window, we use a clever trick: 11535# we set the window size to zero ("\Ev " in rmcup) which the 11536# terminal recognizes as an error and resets the window to all 11537# of memory. 11538# 11539# This trick works on c100 but does not on c108, sigh. 11540# 11541# Some tty drivers use cr3 for concept, others use nl3, hence 11542# the delays on cr and ind below. This padding is only needed at 11543# 9600 baud and up. One or the other is commented out depending on 11544# local conventions. 11545# 11546# 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe 11547# less than 6 but more than 2 will work. 11548# 11549# Note: can't use function keys f7-f10 because they are 11550# indistinguishable from arrow keys (!), also, del char and 11551# clear eol use xon/xoff so they probably won't work very well. 11552# 11553# Also note that we don't define insrt/del char/delline/eop/send 11554# because they don't transmit unless we reset them - I figured 11555# it was a bad idea to clobber their definitions. 11556# 11557# The <mc5> sequence changes the escape character to ^^ so that 11558# escapes will be passed through to the printer. Only trouble 11559# is that ^^ won't be - ^^ was chosen to be unlikely. 11560# Unfortunately, if you're sending raster bits through to be 11561# plotted, any character you choose will be likely, so we lose. 11562# 11563# \EQ"\EY(^W (send anything from printer to host, for xon/xoff) 11564# cannot be # in is2 because it will hang a c100 with no printer 11565# if sent twice. 11566c100|concept100|concept|c104|c100-4p|hds concept 100, 11567 OTbs, am, eo, mir, ul, xenl, 11568 cols#80, lines#24, pb#9600, vt#8, 11569 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r, 11570 cub1=^H, cud1=^J, cuf1=\E=, 11571 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;, 11572 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>, 11573 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK, 11574 ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>, 11575 is1=\EK, 11576 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c, 11577 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_, 11578 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q, 11579 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7, 11580 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?, 11581 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E., 11582 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027, 11583 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI, 11584 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED, 11585 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex, 11586 rmso=\Ed, rmul=\Eg, sgr0=\EN@, 11587 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX, 11588 smso=\ED, smul=\EG, 11589c100-rv|c100-rv-4p|concept100-rv|c100 rev video, 11590 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, 11591 smso=\EE, use=c100, 11592oc100|oconcept|c100-1p|old 1 page concept 100, 11593 in, 11594 is3@, use=c100, 11595 11596# From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996. 11597# Lots of notes, originally inline, but ncurses doesn't grok that. 11598# 11599# am: not available in power on mode, but turned on with \E[=107;207h in 11600# is2=. Also, \E=124l in is2= could have been used to prevent needing 11601# to specify xenl:, but that would have rendered the last space on the 11602# last line useless. 11603# bw: Not available in power on mode, but turned on with \E[=107;207h in 11604# is2=. 11605# clear: Could be done with \E[2J alone, except that vi (and probably most 11606# other programs) assume that this also homes the cursor. 11607# dsl: Go to window 2, go to the beginning of the line, use a line feed to 11608# scroll the window, and go back to window 1. 11609# is2: the string may cause a warning to be issued by tic that it 11610# found a very long line and that it suspects that a comma is missing 11611# somewhere. This warning can be ignored (unless it comes up more than 11612# once). The initialization string contains the following commands: 11613# 11614# [Setup mode items changed from factory defaults:] 11615# \E)0 set alternate character set to 11616# graphics 11617# ^O set character set to default 11618# [In case it wasn't] 11619# \E[m turn off all attributes 11620# [In case they weren't off] 11621# \E[=107; cursor wrap and 11622# 207h character wrap on 11623# \E[90;3u set Fkey definitions to "transmit" 11624# defaults 11625# \E[92;3u set cursor key definitions to 11626# "transmit" defaults 11627# \E[43;1u set shift F13 to transmit... 11628# \177\E$P\177 11629# \E[44;1u set shift F14 to transmit... 11630# \177\E$Q\177 11631# \E[45;1u set shift F15 to transmit... 11632# \177\E$R\177 11633# \E[46;1u set shift F16 to transmit... 11634# \177\E$S\177 11635# \E[200;1u set shift up to transmit... 11636# \177\E$A\177 11637# \E[201;1u set shift down to transmit... 11638# \177\E$B\177 11639# \E[202;1u set shift right to transmit... 11640# \177\E$C\177 11641# \E[203;1u set shift left to transmit... 11642# \177\E$D\177 11643# \E[204;1u set shift home to transmit... 11644# \177\E$H\177 11645# \E[212;1u set backtab to transmit... 11646# \177\E$I\177 11647# \E[213;1u set shift backspace to transmit... 11648# \177\E$^H\177 11649# \E[214;1u set shift del to transmit... 11650# "\E$\177" 11651# [Necessary items not mentioned in setup mode:] 11652# \E[2!w move to window 2 11653# \E[25;25w define window as line 25 of memory 11654# \E[!w move to window 1 11655# \E[2*w show current line of window 2 as 11656# status line 11657# \E[2+x set meta key to use high bit 11658# \E[;3+} move underline to bottom of character 11659# 11660# All Fkeys are set to their default transmit definitions with \E[90;3u 11661# in is2=. IMPORTANT: to use this terminal definition, the "quit" stty 11662# setting MUST be redefined or deactivated, because the default is 11663# contained in almost all of this terminal's Fkey strings! If for some 11664# reason "quit" cannot be altered, the Fkeys can, but it would be 11665# necessary to change ^| to ^] in all of these definitions, and add 11666# \E[2;029!t to is2. 11667# lines: is set to 24 because this terminal refuses to treat the 25th 11668# line normally. 11669# ll: Not available in power on mode, but turned on with \E[=107;207h in 11670# is2=. 11671# lm: Pointless, given that this definition locks a single screen of 11672# memory into view, but what the hey... 11673# rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any 11674# other attributes alone), but some programs expect this to turn off 11675# everything. 11676# rmul: Could use \E[4!{ to turn off only underline (leaving any other 11677# attributes alone), but some programs expect this to turn off 11678# everything. 11679# sgr: Attributes are set on this terminal with the string \E[ followed by 11680# a list of attribute code numbers (in decimal, separated by 11681# semicolons), followed by the character m. The attribute code 11682# numbers are: 11683# 1 for bold; 11684# 2 for dim (which is ignored in power on mode); 11685# 4 for underline; 11686# 5 for blinking; 11687# 7 for inverse; 11688# 8 for not displayable; and 11689# =99 for protected (except that there are strange side 11690# effects to protected characters which make them inadvisable). 11691# The mapping of terminfo parameters to attributes is as follows: 11692# %p1 (standout) = bold and inverse together; 11693# %p2 (underline) = underline; 11694# %p3 (reverse) = inverse; 11695# %p4 (blink) = blinking; 11696# %p5 (dim) is ignored; 11697# %p6 (bold) = bold; 11698# %p7 (invisible) = not displayable; 11699# %p8 (protected) is ignored; and 11700# %p9 (alt char set) = alt char set. 11701# The code to do this is: 11702# \E[0 OUTPUT \E[0 11703# %?%p1%p6%O IF (standout; bold) OR 11704# %t;1 THEN OUTPUT ;1 11705# %; ENDIF 11706# %?%p2 IF underline 11707# %t;4 THEN OUTPUT ;4 11708# %; ENDIF 11709# %?%p4 IF blink 11710# %t;5 THEN OUTPUT ;5 11711# %; ENDIF 11712# %?%p1%p3%O IF (standout; reverse) OR 11713# %t;7 THEN OUTPUT ;7 11714# %; ENDIF 11715# %?%p7 IF invisible 11716# %t;8 THEN OUTPUT ;8 11717# %; ENDIF 11718# m OUTPUT m 11719# %?%p9 IF altcharset 11720# %t^N THEN OUTPUT ^N 11721# %e^O ELSE OUTPUT ^O 11722# %; ENDIF 11723# sgr0: Everything is turned off (including alternate character set), since 11724# there is no way of knowing what it is that the program wants turned 11725# off. 11726# smul: The "underline" attribute is reconfigurable to an overline or 11727# strikethru, or (as done with \E[;3+} in is2=), to a line at the true 11728# bottom of the character cell. This was done to allow for more readable 11729# underlined characters, and to be able to distinguish between an 11730# underlined space, an underscore, and an underlined underscore. 11731# xenl: Terminal can be configured to not need this, but this "glitch" 11732# behavior is actually preferable with autowrap terminals. 11733# 11734# Parameters kf31= thru kf53= actually contain the strings sent by the shifted 11735# Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2 11736# string modifies the 'O' in kf43 to kf46 to a '$'. 11737# 11738# kcbt was originally ^I but redefined in is2=. 11739# kHOM was \E[H originally but redefined in is2=, as were a number of 11740# other keys. 11741# kDC was originally \177 but redefined in is2=. 11742# 11743# kbs: Shift was also ^H originally but redefined as \E$^H in is2=. 11744# tsl: Go to window 2, then do an hpa=. 11745# 11746#------- flash=\E[8;3!}^G\E[3;3!} 11747#------- flash=\E[?5h$<100>\E[?5l 11748# There are two ways to flash the screen, both of which have their drawbacks. 11749# The first is to set the bell mode to video, transmit a bell character, and 11750# set the bell mode back - but to what? There is no way of knowing what the 11751# user's old bell setting was before we messed with it. Worse, the command to 11752# set the bell mode also sets the key click volume, and there is no way to say 11753# "leave that alone", or to know what it's set to, either. 11754# The second way to do a flash is to set the screen to inverse video, pad for a 11755# tenth of a second, and set it back - but like before, there's no way to know 11756# that the screen wasn't ALREADY in inverse video, or that the user may prefer 11757# it that way. The point is moot anyway, since vi (and probably other 11758# programs) assume that by defining flash=, you want the computer to use it 11759# INSTEAD of bel=, rather than as a secondary type of signal. 11760# 11761#------- cvvis=\E[+{ 11762# The is the power on setting, which is also as visible as the cursor 11763# gets. 11764#------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw 11765# Windowing is possible, but not defined here because it is also used to 11766# emulate status line functions. Allowing a program to set a window could 11767# clobber the status line or render it unusable. There is additional memory, 11768# but screen scroll functions are destructive and do not make use of it. 11769# 11770#------- dim= Not available in power on mode. 11771# You have a choice of defining low intensity characters as "half bright" and 11772# high intensity as "normal", or defining low as "normal" and high as "bold". 11773# No matter which you choose, only one of either "half bright" or "bold" is 11774# available at any time, so taking the time to override the default is 11775# pointless. 11776# 11777#------- prot=\E[=0;99m 11778# Not defined, because it appears to have some strange side effects. 11779#------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%; 11780#------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%; 11781#------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%; 11782# Available, but making them available to programs is inadvisable. 11783# The code to do this is: 11784# %?%p1%{24}%< IF ((key; 24) <; 11785# %p1%{30}%> ((key; 30) >; 11786# %p1%{54}%< (key; 54) < 11787# %A ) AND 11788# %O ) OR 11789# [that is, "IF key < 24 OR (key > 30 AND key < 54)",] 11790# %t\E[ THEN OUTPUT \E[ 11791# %p1%d OUTPUT (key) as decimal 11792# [next line applies to pfx only] 11793# ;1 OUTPUT ;1 11794# u OUTPUT u 11795# \177 OUTPUT \177 11796# %p2%s OUTPUT (string) as string 11797# \177 OUTPUT \177 11798# [DEL chosen as delimiter, but could be any character] 11799# [implied: ELSE do nothing] 11800# %; ENDIF 11801# 11802#------- rs2= 11803# Not defined since anything it might do could be done faster and easier with 11804# either Meta-Shift-Reset or the main power switch. 11805# 11806#------- smkx=\E[1!z 11807#------- rmkx=\E[!z 11808# These sequences apply to the cursor and setup keys only, not to the 11809# numeric keypad. But it doesn't matter anyway, since making these 11810# available to programs is inadvisable. 11811# For the key definitions below, all sequences beginning with \E$ are 11812# custom and programmed into the terminal via is2. \E$ also has no 11813# meaning to any other terminal. 11814# 11815#------- cmdch=\E[;%p1%d!t 11816# Available, but making it available to programs is inadvisable. 11817#------- smxon=\E[1*q 11818# Available, but making it available to programs is inadvisable. 11819# Terminal will send XON/XOFF on buffer overflow. 11820#------- rmxon=\E[*q 11821# Available, but making it available to programs is inadvisable. 11822# Terminal will not notify on buffer overflow. 11823#------- smm=\E[2+x 11824#------- rmm=\E[+x 11825# Available, but making them available to programs is inadvisable. 11826# 11827# Printing: 11828# It's not made clear in the manuals, but based on other ansi/vt type 11829# terminals, it's a good guess that this terminal is capable of both 11830# "transparent print" (which doesn't copy data to the screen, and 11831# therefore needs mc5i: specified to say so) and "auxilliary print" 11832# (which does duplicate printed data on the screen, in which case mc4= 11833# and mc5= should use the \E[?4i and \E[?5i strings instead). 11834 11835hds200|Human Designed Systems HDS200, 11836 am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon, 11837 cols#80, it#8, lines#24, lm#0, 11838 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 11839 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{, 11840 clear=\E[H\E[J, cnorm=\E[+{, cr=^M, 11841 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 11842 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 11843 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11844 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 11845 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K, 11846 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 11847 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 11848 invis=\E[0;8m, 11849 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+}, 11850 kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H, 11851 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 11852 kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r, 11853 kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ, 11854 kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r, 11855 kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r, 11856 kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r, 11857 kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r, 11858 kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r, 11859 kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r, 11860 kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r, 11861 kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, 11862 kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, 11863 kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H, 11864 kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A, 11865 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8, 11866 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017, 11867 rmul=\E[m\017, sc=\E7, 11868 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 11869 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m, 11870 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG, 11871 vpa=\E[%i%p1%dd, 11872 11873# <ht> through <el> included to specify padding needed in raw mode. 11874# (avt-ns: added empty <acsc> to suppress a tic warning --esr) 11875avt-ns|concept avt no status line, 11876 OTbs, am, eo, mir, ul, xenl, xon, 11877 cols#80, it#8, lines#24, lm#192, 11878 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 11879 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M, 11880 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 11881 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 11882 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11883 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>, 11884 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H, 11885 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@, 11886 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>, 11887 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l, 11888 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t, 11889 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 11890 kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 11891 kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H, 11892 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 11893 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#, 11894 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, 11895 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n, 11896 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{, 11897 sc=\E7, 11898 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, 11899 sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r, 11900 smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, 11901 tbc=\E[2g, vpa=\E[%p1%{1}%+%dd, 11902avt-rv-ns|concept avt in reverse video mode/no status line, 11903 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, 11904 use=avt-ns, 11905avt-w-ns|concept avt in 132 column mode/no status line, 11906 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, 11907 use=avt-ns, 11908avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video, 11909 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h, 11910 smcup=\E[H\E[1;24;1;132w, use=avt-ns, 11911 11912# Concept AVT with status line. We get the status line using the 11913# "Background status line" feature of the terminal. We swipe the 11914# first line of memory in window 2 for the status line, keeping 11915# 191 lines of memory and 24 screen lines for regular use. 11916# The first line is used instead of the last so that this works 11917# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this 11918# assumes an 8 page AVT but lm isn't currently used anywhere.) 11919# 11920avt+s|concept avt status line changes, 11921 eslok, hs, 11922 lm#191, 11923 dsl=\E[0*w, fsl=\E[1;1!w, 11924 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n, 11925 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r, 11926 tsl=\E[2;1!w\E[;%p1%dH\E[2K, 11927avt|avt-s|concept-avt|avt w/80 columns, 11928 use=avt+s, use=avt-ns, 11929avt-rv|avt-rv-s|avt reverse video w/sl, 11930 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, 11931 use=avt+s, use=avt-ns, 11932avt-w|avt-w-s|concept avt 132 cols+status, 11933 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, 11934 use=avt+s, use=avt-ns, 11935avt-w-rv|avt-w-rv-s|avt wide+status+rv, 11936 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h, 11937 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns, 11938 11939#### Contel Business Systems. 11940# 11941 11942# Contel c300 and c320 terminals. 11943contel300|contel320|c300|Contel Business Systems C-300 or C-320, 11944 am, in, xon, 11945 cols#80, lines#24, xmc#1, 11946 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 11947 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 11948 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>, 11949 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH, 11950 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>, 11951 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD, 11952 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA, 11953 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3, 11954# Contel c301 and c321 terminals. 11955contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321, 11956 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>, 11957 use=contel300, 11958 11959#### Data General (dg) 11960# 11961# According to James Carlson <carlson@xylogics.com> writing in January 1995, 11962# the terminals group at Data General was shut down in 1991; all these 11963# terminals have thus been discontinued. 11964# 11965# DG terminals have function keys that respond to the SHIFT and CTRL keys, 11966# e.g., SHIFT-F1 generates a different code from F1. To number the keys 11967# sequentially, first the unmodified key codes are listed as F1 through F15. 11968# Then their SHIFT versions are listed as F16 through F30, their CTRL versions 11969# are listed as F31 through F45, and their CTRL-SHIFT versions are listed as 11970# F46 through F60. This is done in the private "includes" below whose names 11971# start with "dgkeys+". 11972# 11973# DG terminals generally support 8 bit characters. For each of these terminals 11974# two descriptions are supplied: 11975# 1) A default description for 8 bits/character communications, which 11976# uses the default DG international character set and keyboard codes. 11977# 2) A description with suffix "-7b" for 7 bits/character communications. 11978# This description must use the NON-DEFAULT native keyboard language. 11979 11980# Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33), 11981# Ctrl/Shift fdkeys (kf34-kf44). 11982 11983dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys, 11984 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z, 11985 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C, 11986 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z, 11987 kf11=\233011z, kf12=\233012z, kf13=\233013z, 11988 kf14=\233014z, kf15=\233000z, kf16=\233101z, 11989 kf17=\233102z, kf18=\233103z, kf19=\233104z, 11990 kf2=\233002z, kf20=\233105z, kf21=\233106z, 11991 kf22=\233107z, kf23=\233108z, kf24=\233109z, 11992 kf25=\233110z, kf26=\233111z, kf27=\233112z, 11993 kf28=\233113z, kf29=\233114z, kf3=\233003z, 11994 kf30=\233100z, kf31=\233201z, kf32=\233202z, 11995 kf33=\233203z, kf34=\233204z, kf35=\233205z, 11996 kf36=\233206z, kf37=\233207z, kf38=\233208z, 11997 kf39=\233209z, kf4=\233004z, kf40=\233210z, 11998 kf41=\233211z, kf42=\233212z, kf43=\233213z, 11999 kf44=\233214z, kf45=\233200z, kf46=\233301z, 12000 kf47=\233302z, kf48=\233303z, kf49=\233304z, 12001 kf5=\233005z, kf50=\233305z, kf51=\233306z, 12002 kf52=\233307z, kf53=\233308z, kf54=\233309z, 12003 kf55=\233310z, kf56=\233311z, kf57=\233312z, 12004 kf58=\233313z, kf59=\233314z, kf6=\233006z, 12005 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z, 12006 khome=\233H, kprt=\233i, 12007 12008dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys, 12009 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z, 12010 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 12011 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z, 12012 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z, 12013 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z, 12014 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z, 12015 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z, 12016 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z, 12017 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z, 12018 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z, 12019 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z, 12020 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z, 12021 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z, 12022 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z, 12023 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z, 12024 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z, 12025 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z, 12026 kf9=\E[009z, khome=\E[H, kprt=\E[i, 12027 12028dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys, 12029 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K, 12030 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c, 12031 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r, 12032 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3, 12033 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8, 12034 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#, 12035 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(, 12036 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w, 12037 kf8=^^x, kf9=^^y, khome=^H, 12038 12039dgkeys+15|Private entry describing 15 DG mode special keys, 12040 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^, 12041 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^}, 12042 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d, 12043 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i, 12044 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s, 12045 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5, 12046 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:, 12047 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!, 12048 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&, 12049 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,, 12050 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x, 12051 kf9=^^y, 12052 12053# Data General color terminals use the "Tektronix" color model. The total 12054# number of colors varies with the terminal model, as does support for 12055# attributes used in conjunction with color. 12056 12057# Removed u7, u8 definitions since they conflict with tack: 12058# Preserve user-defined colors in at least some cases. 12059# u7=^^Fh, 12060# Default is ACM mode. 12061# u8=^^F}20^^Fi^^F}21, 12062# 12063dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode, 12064 bce, 12065 colors#16, ncv#53, pairs#256, 12066 op=\036Ad\036Bd, 12067 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, 12068 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, 12069 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c, 12070 12071dg+fixed|Fixed color info for DG D430C terminals in DG mode, 12072 use=dgunix+fixed, 12073 12074# Video attributes are coordinated using static variables set by "sgr", then 12075# checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings. 12076# (D=dim, U=underline, B=blink, R=reverse.) 12077dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode, 12078 bce, 12079 colors#8, ncv#16, pairs#64, 12080 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m, 12081 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12082 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12083 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12084 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12085 12086dg+color|Color info for Data General D470C terminals in ANSI mode, 12087 colors#16, ncv#53, pairs#256, 12088 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12089 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12090 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12091 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 12092 use=dg+color8, 12093 12094dgmode+color8|Color info for Data General D220/D230C terminals in DG mode, 12095 bce, 12096 colors#8, ncv#16, pairs#64, 12097 op=\036Ad\036Bd, 12098 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c, 12099 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c, 12100 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c, 12101 12102dgmode+color|Color info for Data General D470C terminals in DG mode, 12103 colors#16, pairs#256, 12104 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, 12105 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, 12106 use=dgmode+color8, 12107 12108dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode, 12109 bce, ccc, 12110 colors#52, ncv#53, pairs#26, 12111 initp=\036RG0%p1%02X%p2%{256}%*%{1001}%/%02X%p3%{256}%*%{1001}%/%02X%p4%{256}%*%{1001}%/%02X%p5%{256}%*%{1001}%/%02X%p6%{256}%*%{1001}%/%02X%p7%{256}%*%{1001}%/%02X, 12112 oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00, 12113 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D, 12114 scp=\036RG2%p1%02X, 12115 12116# Colors are in the order: normal, reverse, dim, dim + reverse. 12117dg+ccc|Configurable color info for DG D430C terminals in DG mode, 12118 bce, ccc, 12119 colors#52, ncv#53, pairs#26, 12120 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c, 12121 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00, 12122 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=, 12123 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c, 12124 12125# The generic DG terminal type (an 8-bit-clean subset of the 6053) 12126# Initialization string 1 sets: 12127# ^R - vertical scrolling enabled 12128# ^C - blinking enabled 12129dg-generic|Generic Data General terminal in DG mode, 12130 am, bw, msgr, xon, 12131 cols#80, lines#24, 12132 bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X, 12133 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C, 12134 mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\, 12135 smul=^T, use=dgkeys+11, 12136 12137# According to the 4.4BSD termcap file, the dg200 <cup> should be the 12138# termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap 12139# notation that's "^P%r%+\200%+\200"). Those \200s are suspicious, 12140# maybe they were originally nuls (which would fit). 12141 12142dg200|data general dasher 200, 12143 OTbs, am, bw, 12144 cols#80, lines#24, 12145 bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X, 12146 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J, 12147 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q, 12148 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x, 12149 kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U, 12150 smso=^^D, smul=^T, 12151 12152# Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL 12153dg210|dg-ansi|Data General 210/211, 12154 am, 12155 cols#80, lines#24, 12156 OTnl=\E[B, clear=\E[2J, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH, 12157 cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D, 12158 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 12159 nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, smso=\E[7;m, 12160 smul=\E[4;m, 12161# From: Peter N. Wan <ihnp4!gatech!gacsr!wan> 12162# courtesy of Carlos Rucalde of Vantage Software, Inc. 12163# (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover. 12164# I suspect the d200 function keys actually work on the dg211, check it out.) 12165dg211|Data General d211, 12166 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@, 12167 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L, 12168 rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200, 12169 12170# dg450 from Cornell (not official) 12171dg450|dg6134|data general 6134, 12172 cub1@, cuf1=^X, use=dg200, 12173 12174# Not official... 12175# Note: lesser Dasher terminals will not work with vi because vi insists upon 12176# having a command to move straight down from any position on the bottom line 12177# and scroll the screen up, or a direct vertical scroll command. The 460 and 12178# above have both, the D210/211, for instance, has neither. We must use ANSI 12179# mode rather than DG mode because standard UNIX tty drivers assume that ^H is 12180# backspace on all terminals. This is not so in DG mode. 12181# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the 12182# grounds that there is no matching ":ml:" 12183# fixed garbled ":k9=\E[00\:z:" capability -- esr) 12184dg460-ansi|Data General Dasher 460 in ANSI-mode, 12185 OTbs, am, msgr, ul, 12186 cols#80, it#8, lines#24, 12187 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B, 12188 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, 12189 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 12190 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D, 12191 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 12192 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z, 12193 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z, 12194 kf8=\E[009z, kf9=\E[010z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3, 12195 lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m, 12196 ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m, 12197 smul=\E[4m, 12198# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official) 12199# Data General 605x 12200# Ought to work for a Model 6242, Type D210 as well as a 605x. 12201# Note that the cursor-down key transmits ^Z. Job control users, beware! 12202# This also matches a posted description of something called a `Dasher 100' 12203# so there's a dg100 alias here. 12204# (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr) 12205dg6053-old|dg100|data general 6053, 12206 OTbs, am, bw, ul, 12207 cols#80, lines#24, 12208 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z, 12209 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K, 12210 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X, 12211 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, 12212 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L, 12213 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D, 12214 smul=^T, 12215 12216# (Some performance can be gained over the generic DG terminal type) 12217dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053, 12218 xon@, 12219 home=^P\0\0, ll=^P\0^W, use=dg-generic, 12220 12221# Like 6053, but adds reverse video and more keypad and function keys. 12222d200|d200-dg|Data General DASHER D200, 12223 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^], 12224 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;, 12225 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15, 12226 use=dg6053, 12227 12228# DASHER D210 series terminals in ANSI mode. 12229# Reverse video, no insert/delete character/line, 7 bits/character only. 12230# 12231# Initialization string 1 sets: 12232# <0 - scrolling enabled 12233# <1 - blink enabled 12234# <4 - print characters regardless of attributes 12235d210|d214|Data General DASHER D210 series, 12236 am, bw, msgr, xon, 12237 cols#80, lines#24, 12238 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M, 12239 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 12240 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 12241 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K, 12242 el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l, 12243 ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, 12244 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m, 12245 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b, 12246 12247# DASHER D210 series terminals in DG mode. 12248# Like D200, but adds clear to end-of-screen and needs XON/XOFF. 12249d210-dg|d214-dg|Data General DASHER D210 series in DG mode, 12250 xon, 12251 ed=^^FF, use=d200-dg, 12252 12253# DASHER D211 series terminals in ANSI mode. 12254# Like the D210, but with 8-bit characters and local printer support. 12255# 12256# Initialization string 2 sets: 12257# \E[2;1;1;1v 12258# 2;1 - 8 bit operations 12259# 1;1 - 8 bit (international) keyboard language 12260# \E(B - default primary character set (U.S. ASCII) 12261# \E)4 - default secondary character set (international) 12262# ^O - primary character set 12263# 12264d211|d215|Data General DASHER D211 series, 12265 km, 12266 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b, 12267 use=d210, 12268 12269# Initialization string 2 sets: 12270# \E[2;0;1;0v 12271# 2;0 - 7 bit operations 12272# 1;0 - 7 bit (native) keyboard language 12273# \E(0 - default character set (the keyboard native language) 12274# ^O - primary character set 12275d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode, 12276 km@, 12277 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211, 12278 12279# Like the D210 series, but adds support for 8-bit characters. 12280# 12281# Reset string 2 sets: 12282# ^^N - secondary character set 12283# ^^FS0> - 8 bit international character set 12284# ^^O - primary character set 12285# ^^FS00 - default character set (matching the native keyboard language) 12286# 12287d211-dg|d215-dg|Data General DASHER D211 series in DG mode, 12288 km, 12289 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg, 12290 12291d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode, 12292 use=d211-dg, 12293 12294# Enhanced DG mode with changes to be more UNIX compatible. 12295d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode, 12296 mc5i, 12297 it#8, 12298 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI, 12299 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA, 12300 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J, 12301 is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd, 12302 kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, 12303 kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, 12304 mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00, 12305 rs2=\036N\036FS0E\036O\036FS00, 12306 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;, 12307 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11, 12308 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg, 12309d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines, 12310 lines#25, 12311 is3=\036Fz2, use=d216+, 12312 12313d217-unix|Data General DASHER D217 in DG-UNIX mode, 12314 use=d216-unix, 12315d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines, 12316 use=d216-unix-25, 12317 12318# DASHER D220 color terminal in ANSI mode. 12319# Like the D470C but with fewer colors and screen editing features. 12320# 12321# Initialization string 1 sets: 12322# \E[<0;<1;<4l 12323# <0 - scrolling enabled 12324# <1 - blink enabled 12325# <4 - print characters regardless of attributes 12326# \E[m - all attributes off 12327# Reset string 1 sets: 12328# \Ec - initial mode defaults (RIS) 12329# 12330d220|Data General DASHER D220, 12331 mc5i@, 12332 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, 12333 use=dg+color8, use=d470c, 12334 12335d220-7b|Data General DASHER D220 in 7 bit mode, 12336 mc5i@, 12337 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, 12338 use=dg+color8, use=d470c-7b, 12339 12340# Initialization string 3 sets: 12341# - default cursor (solid rectangle) 12342# Reset string 2 sets: 12343# ^^N - secondary character set 12344# ^^FS0> - 8 bit international character set 12345# ^^O - primary character set 12346# ^^FS00 - default character set (matching the native keyboard language) 12347# 12348d220-dg|Data General DASHER D220 color terminal in DG mode, 12349 mc5i@, 12350 dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@, 12351 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8, 12352 use=d470c-dg, 12353 12354# DASHER D230C color terminal in ANSI mode. 12355# Like the D220 but with minor ANSI compatibility improvements. 12356# 12357d230c|d230|Data General DASHER D230C, 12358 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J, 12359 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m, 12360 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;, 12361 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m, 12362 smul=\E[4;50m, use=dgkeys+7b, use=d220, 12363 12364d230c-dg|d230-dg|Data General DASHER D230C in DG mode, 12365 use=d220-dg, 12366 12367# DASHER D400/D450 series terminals. 12368# These add intelligent features like insert/delete to the D200 series. 12369# 12370# Initialization string 2 sets: 12371# ^^FQ2 - default cursor (solid rectangle) 12372# ^^FW - character protection disabled 12373# ^^FJ - normal (80 column) mode 12374# ^^F\^ - horizontal scrolling enabled (for alignment) 12375# ^^FX004? - margins at columns 0 and 79 12376# ^^F] - horizontal scrolling disabled 12377# ^^O - primary character set 12378# ^^FS00 - default character set (the keyboard native language) 12379# - (should reset scrolling regions, but that glitches the screen) 12380# Reset string 1 sets: 12381# ^^FA - all terminal defaults except scroll rate 12382# Reset string 2 sets: 12383# ^^F] - horizontal scrolling disabled 12384# ^^FT0 - jump scrolling 12385# 12386d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series, 12387 mc5i, 12388 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0, 12389 cnorm=\036FQ2, dch1=^^K, dl1=^^FI, 12390 enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177, 12391 ich1=^^J, il1=^^FH, 12392 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00, 12393 ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, 12394 rs1=^^FA, rs2=\036F]\036FT0, 12395 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;, 12396 sgr0=\017\025\035\036E\036O, smacs=^^N, 12397 vpa=\020\177%p1%c, use=d210-dg, 12398 12399# DASHER D410/D460 series terminals in ANSI mode. 12400# These add a large number of intelligent terminal features. 12401# 12402# Initialization string 1 sets: 12403# \E[<0;<1;<2;<4l 12404# <0 - scrolling enabled 12405# <1 - blink enabled 12406# <2 - horizontal scrolling enabled (for alignment) 12407# <4 - print characters regardless of attributes 12408# \E[5;0v - normal (80 column) mode 12409# \E[1;1;80w - margins at columns 1 and 80 12410# \E[1;6;<2h 12411# 1 - print all characters even if protected 12412# 6 - character protection disabled 12413# <2 - horizontal scrolling disabled 12414# - (should reset scrolling regions, but that glitches the screen) 12415# 12416# Initialization string 2 sets: 12417# \E[3;2;2;1;1;1v 12418# 3;2 - default cursor (solid rectangle) 12419# 2;1 - 8 bit operations 12420# 1;1 - international keyboard language 12421# \E(B - default primary character set (U.S. ASCII) 12422# \E)4 - default secondary character set (international) 12423# ^O - primary character set 12424# 12425# Reset string 1 sets: 12426# \Ec - initial mode defaults (RIS) 12427# \E[<2h - horizontal scrolling disabled 12428# 12429# Reset string 2 sets: 12430# \E[4;0;2;1;1;1v 12431# 4;0 - jump scrolling 12432# 2;1 - 8 bit operations 12433# 1;1 - 8 bit (international) keyboard language 12434# \E(B - default primary character set (U.S. ASCII) 12435# \E)4 - default secondary character set (international) 12436# 12437d410|d411|d460|d461|Data General DASHER D410/D460 series, 12438 mc5i, 12439 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v, 12440 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 12441 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 12442 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h, 12443 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i, 12444 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h, 12445 rs2=\E[4;0;2;1;1;1v\E(B\E)4, 12446 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;, 12447 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211, 12448 12449# Initialization string 2 sets: 12450# \E[3;2;2;0;1;0v 12451# 3;2 - default cursor (solid rectangle) 12452# 2;0 - 7 bit operations 12453# 1;0 - 7 bit (native) keyboard language 12454# \E(0 - default character set (the keyboard native language) 12455# ^O - primary character set 12456# 12457# Reset string 2 sets: 12458# \E[4;0;2;0;1;0v 12459# 4;0 - jump scrolling 12460# 2;0 - 7 bit operations 12461# 1;0 - 7 bit (native) keyboard language 12462# \E(0 - default character set (the keyboard native language) 12463# 12464d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode, 12465 km@, 12466 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O, 12467 rs2=\E[4;0;2;0;1;0v\E(0, 12468 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;, 12469 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410, 12470 12471d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode, 12472 km, 12473 enacs@, rmacs=\036FS00, 12474 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;, 12475 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11, 12476 use=d400-dg, 12477 12478# DASHER D410/D460 series terminals in wide (126 columns) ANSI mode. 12479# 12480# Initialization string 1 sets: 12481# \E[<0;<1;<2;<4l 12482# <0 - scrolling enabled 12483# <1 - blink enabled 12484# <2 - horizontal scrolling enabled (for alignment) 12485# <4 - print characters regardless of attributes 12486# \E[5;1v - compressed (135 column) mode 12487# \E[1;1;126 - margins at columns 1 and 126 12488# \E[1;6;<2h 12489# 1 - print all characters even if protected 12490# 6 - character protection disabled 12491# <2 - horizontal scrolling disabled 12492# - (should reset scrolling regions, but that glitches the screen) 12493# 12494# Reset string 1 sets: 12495# \Ec - initial mode defaults (RIS) 12496# \E[5;1v - compressed (135 column) mode 12497# \E[1;1;126w - margins at columns 1 and 126 12498# \E[<2h - horizontal scrolling disabled 12499# 12500d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode, 12501 cols#126, 12502 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h, 12503 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410, 12504 12505d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode, 12506 cols#126, 12507 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h, 12508 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b, 12509 12510d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode, 12511 use=d410-dg, 12512 12513# These add intelligent features like scrolling regions. 12514d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode, 12515 civis=\036FQ0, clear=^^FE, cnorm=\036FQ5, 12516 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI, 12517 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH, 12518 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00, 12519 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I, 12520 rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10, 12521 vpa=\036FPFF%p1%2.2X, 12522 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, 12523 use=d216+, 12524d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode, 12525 cols#132, 12526 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00, 12527 rs2=\036P@1\036FK\036FX0083, 12528 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X, 12529 use=d412-unix, 12530d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines, 12531 lines#25, 12532 is3=\036Fz2, 12533 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, 12534 use=d462+, 12535d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line, 12536 eslok, hs, 12537 clear=\036FG\036PH, fsl=\036F}01\022, 12538 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@, 12539 tsl=\036F}00\036FP%p1%2.2X18\036PG, 12540 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X, 12541 use=d462+, 12542 12543# Relative cursor motions are confined to the current window, 12544# which is not what the scrolling region specification expects. 12545# Thus, relative vertical cursor positioning must be deleted. 12546d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region, 12547 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;, 12548 cud1@, cuu1@, ll@, use=d462+, 12549 12550d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode, 12551 use=d412-unix, 12552d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode, 12553 use=d412-unix-w, 12554d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines, 12555 use=d412-unix-25, 12556d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line, 12557 use=d412-unix-s, 12558d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region, 12559 use=d412-unix-sr, 12560 12561d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode, 12562 use=d413-unix, 12563d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode, 12564 use=d413-unix-w, 12565d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines, 12566 use=d413-unix-25, 12567d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line, 12568 use=d413-unix-s, 12569d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region, 12570 use=d413-unix-sr, 12571 12572d430c-dg|d430-dg|Data General D430C in DG mode, 12573 use=d413-dg, use=dg+fixed, 12574d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors, 12575 use=d413-dg, use=dg+ccc, 12576 12577d430c-unix|d430-unix|Data General D430C in DG-UNIX mode, 12578 use=d413-unix, use=dgunix+fixed, 12579d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode, 12580 use=d413-unix-w, use=dgunix+fixed, 12581d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines, 12582 use=d413-unix-25, use=dgunix+fixed, 12583d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line, 12584 use=d413-unix-s, use=dgunix+fixed, 12585d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region, 12586 use=d413-unix-sr, use=dgunix+fixed, 12587d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors, 12588 use=d413-unix, use=dgunix+ccc, 12589d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors, 12590 use=d413-unix-w, use=dgunix+ccc, 12591d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors, 12592 use=d413-unix-25, use=dgunix+ccc, 12593d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors, 12594 use=d413-unix-s, use=dgunix+ccc, 12595d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors, 12596 use=d413-unix-sr, use=dgunix+ccc, 12597 12598# DASHER D470C color terminal in ANSI mode. 12599# Like the D460 but with 16 colors and without a compressed mode. 12600# 12601# Initialization string 1 sets: 12602# \E[<0;<1;<2;<4l 12603# <0 - scrolling enabled 12604# <1 - blink enabled 12605# <2 - horizontal scrolling enabled (for alignment) 12606# <4 - print characters regardless of attributes 12607# \E[1;1;80w - margins at columns 1 and 80 12608# \E[1;6;<2h 12609# 1 - print all characters even if protected 12610# 6 - character protection disabled 12611# <2 - horizontal scrolling disabled 12612# - (should reset scrolling regions, but that glitches the screen) 12613# 12614d470c|d470|Data General DASHER D470C, 12615 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, 12616 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;, 12617 use=dg+color, use=d460, 12618 12619d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode, 12620 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, 12621 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;, 12622 use=dg+color, use=d460-7b, 12623 12624# Initialization string 2 sets: 12625# ^^FQ2 - default cursor (solid rectangle) 12626# ^^FW - character protection disabled 12627# ^^F\^ - horizontal scrolling enabled (for alignment) 12628# ^^FX004? - margins at columns 0 and 79 12629# ^^F] - horizontal scrolling disabled 12630# ^^O - primary character set 12631# ^^FS00 - default character set (the keyboard native language) 12632# - (should reset scrolling regions, but that glitches the screen) 12633# 12634d470c-dg|d470-dg|Data General DASHER D470C in DG mode, 12635 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00, 12636 use=dgmode+color, use=d460-dg, 12637 12638# DASHER D555 terminal in ANSI mode. 12639# Like a D411, but has an integrated phone. 12640d555|Data General DASHER D555, 12641 use=d411, 12642d555-7b|Data General DASHER D555 in 7-bit mode, 12643 use=d411-7b, 12644d555-w|Data General DASHER D555 in wide mode, 12645 use=d411-w, 12646d555-7b-w|Data General DASHER D555 in wide 7-bit mode, 12647 use=d411-7b-w, 12648d555-dg|Data General DASHER D555 series in DG mode, 12649 use=d411-dg, 12650 12651# DASHER D577 terminal in ANSI mode. 12652# Like a D411, but acts as a keyboard for serial printers ("KSR" modes). 12653d577|Data General DASHER D577, 12654 use=d411, 12655d577-7b|Data General DASHER D577 in 7-bit mode, 12656 use=d411-7b, 12657d577-w|Data General DASHER D577 in wide mode, 12658 use=d411-w, 12659d577-7b-w|Data General DASHER D577 in wide 7-bit mode, 12660 use=d411-7b-w, 12661 12662d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode, 12663 use=d411-dg, 12664 12665# DASHER D578 terminal. 12666# Like a D577, but without compressed mode; like a D470C in this respect. 12667# 12668# Initialization string 1 sets: 12669# \E[<0;<1;<2;<4l 12670# <0 - scrolling enabled 12671# <1 - blink enabled 12672# <2 - horizontal scrolling enabled (for alignment) 12673# <4 - print characters regardless of attributes 12674# \E[1;1;80w - margins at columns 1 and 80 12675# \E[1;6;<2h 12676# 1 - print all characters even if protected 12677# 6 - character protection disabled 12678# <2 - horizontal scrolling disabled 12679# - (should reset scrolling regions, but that glitches the screen) 12680# 12681d578|Data General DASHER D578, 12682 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577, 12683d578-7b|Data General DASHER D578 in 7-bit mode, 12684 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b, 12685 12686#### Datamedia (dm) 12687# 12688# Datamedia was headquartered in Nashua, New Hampshire until it went 12689# out of business in 1993, but the ID plates on the terminals referred 12690# to the factory in Pennsauken, NJ. The factory was sold to a PCB board 12691# manufacturer which threw out all information about the terminals. 12692# 12693 12694cs10|colorscan|Datamedia Color Scan 10, 12695 msgr, 12696 cols#80, lines#24, 12697 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 12698 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K, 12699 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 12700 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m, 12701 sgr0=\E[m, smso=\E[7m, smul=\E[4m, 12702cs10-w|Datamedia Color Scan 10 with 132 columns, 12703 cols#132, 12704 cup=\E[%i%p1%02d;%p2%03dH, use=cs10, 12705 12706# (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr) 12707dm1520|dm1521|datamedia 1520, 12708 OTbs, am, xenl, 12709 cols#80, it#8, lines#24, 12710 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\, 12711 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 12712 home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_, 12713 khome=^Y, 12714# dm2500: this terminal has both <ich> and <smir>. Applications using 12715# termcap/terminfo directly (rather than through ncurses) might be confused. 12716dm2500|datamedia2500|datamedia 2500, 12717 OTbs, OTnc, 12718 cols#80, lines#24, 12719 bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\, 12720 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z, 12721 dch1=\020\010\030\035$<10*>, 12722 dl1=\020\032\030\035$<10*>, el=^W, home=^B, 12723 ich1=\020\034\030\035$<10*>, 12724 il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377, 12725 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^], 12726 smdc=^P, smir=^P, smso=^N, 12727# dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82) 12728# also, has a meta-key. 12729# From: <goldberger@su-csli.arpa> 12730# (dmchat: ":MT:" changed to ":km:" -- esr) 12731dmchat|dmchat version of datamedia 2500, 12732 km, 12733 dl1=\020\032\030\035$<2/>, 12734 il1=\020\n\030\035\030\035$<1*/>, use=dm2500, 12735# (dm3025: ":MT:" changed to ":km:" -- esr) 12736dm3025|datamedia 3025a, 12737 OTbs, km, 12738 cols#80, it#8, lines#24, 12739 bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 12740 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, 12741 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK, 12742 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>, 12743 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP, 12744 smir=\EP, smso=\EO1, 12745dm3045|datamedia 3045a, 12746 OTbs, am, eo, km@, ul, xenl, 12747 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA, 12748 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, 12749 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r, 12750 khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@, 12751 use=dm3025, 12752# Datamedia DT80 soft switches: 12753# 1 0=Jump 1=Smooth 12754# Autorepeat 0=off 1=on 12755# Screen 0=Dark 1=light 12756# Cursor 0=u/l 1=block 12757# 12758# 2 Margin Bell 0=off 1=on 12759# Keyclick 0=off 1=on 12760# Ansi/VT52 0=VT52 1=Ansi 12761# Xon/Xoff 0=Off 1=On 12762# 12763# 3 Shift3 0=Hash 1=UK Pound 12764# Wrap 0=Off 1=On 12765# Newline 0=Off 1=On 12766# Interlace 0=Off 1=On 12767# 12768# 4 Parity 0=Odd 1=Even 12769# Parity 0=Off 1=On 12770# Bits/Char 0=7 1=8 12771# Power 0=60Hz 1=50Hz 12772# 12773# 5 Line Interface 0=EIA 1=Loop 12774# Aux Interface 0=EIA 1=Loop 12775# Local Copy 0=Off 1=On 12776# Spare 12777# 12778# 6 Aux Parity 0=Odd 1=Even 12779# Aux Parity 0=Off 1=On 12780# Aux Bits/Char 0=7 1=8 12781# CRT Saver 0=Off 1=On 12782# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding. 12783dm80|dmdt80|dt80|datamedia dt80/1, 12784 clear=\E[2J\E[H, cud1=^J, cuf1=\E[C, 12785 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 12786 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM, 12787 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 12788 use=vt100, 12789# except in 132 column mode, where it needs a little padding. 12790# This is still less padding than the vt100, and you can always turn on 12791# the ^S/^Q handshaking, so you can use vt100 flavors for things like 12792# reverse video. 12793dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode, 12794 cols#132, 12795 clear=\E[H\E[2J$<50/>, cud1=^J, 12796 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>, 12797 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80, 12798# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 12799dt80-sas|Datamedia DT803/DTX for SAS usage, 12800 am, bw, 12801 cols#80, lines#24, 12802 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, 12803 bel=^G, clear=^L, cr=^M, 12804 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2, 12805 cub1=^H, cud1=\EB, cuf1=^\, 12806 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K, 12807 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB, 12808 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J, 12809 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N, 12810 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF, 12811 smso=\E$2\004, tbc=\E'0, 12812 12813# Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL 12814# These aren't end-all Excel termcaps; but do insert/delete char/line 12815# and name some of the extra function keys. (Mike Feldman ccvaxa!feldman) 12816# The naming convention has been bent somewhat, with the use of E? (where 12817# E is for 'Excel') as # a name. This was done to distinguish the entries 12818# from the other Datamedias in use here, and yet to associate a model of 12819# the Excel terminals with the regular datamedia terminals that share 12820# major characteristics. 12821excel62|excel64|datamedia Excel 62, 12822 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv, 12823 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, 12824 use=dt80, 12825excel62-w|excel64-w|datamedia Excel 62 in 132 char mode, 12826 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv, 12827 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, 12828 use=dt80w, 12829excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode, 12830 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J, 12831 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, 12832 smir=\E[4h, use=dt80, 12833 12834#### Falco 12835# 12836# Falco Data Products 12837# 440 Potrero Avenue 12838# Sunnyvale, CA 940864-196 12839# Vox: (800)-325-2648 12840# Fax: (408)-745-7860 12841# Net: techsup@charm.sys.falco.com 12842# 12843# Current Falco models as of 1995 are generally ANSI-compatible and support 12844# emulations of DEC VT-series, Wyse, and Televideo types. 12845# 12846 12847# Test version for Falco ts-1. See <arpavax.hickman@ucb> for info 12848# This terminal was released around 1983 and was discontinued long ago. 12849# The standout and underline highlights are the same. 12850falco|ts1|ts-1|falco ts-1, 12851 OTbs, am, 12852 cols#80, it#8, lines#24, 12853 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 12854 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 12855 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE, 12856 ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 12857 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, 12858 smir=\Eq, smso=\Eg1, smul=\Eg1, 12859falco-p|ts1p|ts-1p|falco ts-1 with paging option, 12860 OTbs, am, da, db, mir, msgr, ul, 12861 cols#80, it#8, lines#24, 12862 bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B, 12863 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A, 12864 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I, 12865 il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B, 12866 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er, 12867 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq, 12868 smso=\Eg4, smul=\Eg1, 12869# (ts100: I added <rmam>/<smam> based on the init string -- esr) 12870ts100|ts100-sp|falco ts100-sp, 12871 am, mir, msgr, xenl, xon, 12872 cols#80, it#8, lines#24, vt#3, 12873 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 12874 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 12875 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 12876 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 12877 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 12878 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 12879 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>, 12880 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, 12881 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea, 12882 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 12883 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 12884 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, 12885 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 12886 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, 12887 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 12888 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 12889 use=vt100+fnkeys, 12890ts100-ctxt|falco ts-100 saving context, 12891 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100, 12892 12893#### Florida Computer Graphics 12894# 12895 12896# Florida Computer Graphics Beacon System, using terminal emulator program 12897# "host.com", as provided by FCG. This description is for an early release 12898# of the "host" program. Known bug: <ed> clears the whole screen, so it's 12899# commented out. 12900 12901# From: David Bryant <cbosg!djb> 1/7/83 12902beacon|FCG Beacon System, 12903 am, da, db, 12904 cols#80, lines#32, 12905 bel=\ESTART\r\E37\r\EEND\r$<1>, 12906 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M, 12907 cub1=^H, cud1=^J, cuf1=\EV, 12908 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU, 12909 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE, 12910 ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=, 12911 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>, 12912 rmul=\ESTART\r\E60\,0\r\EEND\r, 12913 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>, 12914 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>, 12915 smso=\ESTART\r\E70\,6\r\EEND\r$<20>, 12916 smul=\ESTART\r\E60\,1\r\EEND\r, 12917 12918#### Fluke 12919# 12920 12921# The f1720a differences from ANSI: no auto margin, destructive 12922# tabs, # of lines, funny highlighting and underlining 12923f1720|f1720a|fluke 1720A, 12924 xt, 12925 cols#80, lines#16, xmc#1, 12926 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, 12927 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, 12928 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^], 12929 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 12930 smso=\E[7m, smul=\E[4m, 12931 12932#### Liberty Electronics (Freedom) 12933# 12934# Liberty Electronics 12935# 48089 Fremont Blvd 12936# Fremont CA 94538 12937# Vox: (510)-623-6000 12938# Fax: (510)-623-7021 12939 12940# From: <faletti@berkeley.edu> 12941# (f100: added empty <acsc> to suppress a tic warning; 12942# made this relative to adm+sgr -- note that <invis> isn't 12943# known to work for f100 but does on the f110. --esr) 12944f100|freedom|freedom100|freedom model 100, 12945 OTbs, am, bw, hs, mir, msgr, xon, 12946 cols#80, lines#24, 12947 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, 12948 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 12949 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET, 12950 flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c, 12951 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>, 12952 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, 12953 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, 12954 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 12955 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er, 12956 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef, 12957 vpa=\E[%p1%{32}%+%c, use=adm+sgr, 12958f100-rv|freedom-rv|freedom 100 in reverse video, 12959 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100, 12960# The f110 and f200 have problems with vi(1). They use the ^V 12961# code for the down cursor key. When kcud1 is defined in terminfo 12962# as ^V, the Control Character Quoting capability (^V in insert mode) 12963# is lost! It cannot be remapped in vi because it is necessary to enter 12964# a ^V to to quote the ^V that is being remapped!!! 12965# 12966# f110/f200 users will have to decide whether 12967# to lose the down cursor key or the quoting capability. We will opt 12968# initially for leaving the quoting capability out, since use of VI 12969# is not generally applicable to most interactive applications 12970# (f110: added <ht>, <khome> & <kcbt> from f100 -- esr) 12971f110|freedom110|Liberty Freedom 110, 12972 bw@, eslok, 12973 it#8, wsl#80, 12974 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V, 12975 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE, 12976 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, 12977 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, 12978 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq, 12979 smso=\EG<, tsl=\Ef, use=f100, 12980f110-14|Liberty Freedom 110 14inch, 12981 dch1@, use=f110, 12982f110-w|Liberty Freedom 110 - 132 cols, 12983 cols#132, use=f110, 12984f110-14w|Liberty Freedom 110 14in/132 cols, 12985 cols#132, 12986 dch1@, use=f110, 12987# (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 12988f200|freedom200|Liberty Freedom 200, 12989 OTbs, am, eslok, hs, mir, msgr, xon, 12990 cols#80, it#8, lines#24, wsl#80, 12991 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0, 12992 clear=^Z, cnorm=\E.1, cr=^M, 12993 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V, 12994 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 12995 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, 12996 flash=\Eo$<200/>\En, fsl=^M, home=^^, 12997 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H, 12998 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, 12999 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, 13000 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 13001 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, 13002 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<, 13003 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr, 13004f200-w|Liberty Freedom 200 - 132 cols, 13005 cols#132, use=f200, 13006# The f200 has the ability to reprogram the down cursor key. The key is 13007# reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM, 13008# so powering the terminal off and on will not cause the change to be lost. 13009f200vi|Liberty Freedom 200 for vi, 13010 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200, 13011f200vi-w|Liberty Freedom 200 - 132 cols for vi, 13012 cols#132, use=f200vi, 13013 13014#### GraphOn (go) 13015# 13016# Graphon Corporation 13017# 544 Division Street 13018# Campbell, CA 95008 13019# Vox: (408)-370-4080 13020# Fax: (408)-370-5047 13021# Net: troy@graphon.com (Troy Morrison) 13022# 13023# 13024# The go140 and go225 have been discontinued. GraphOn now makes X terminals, 13025# including one odd hybrid that starts out life on power-up as a character 13026# terminal, than can be switched to X graphics mode (driven over the serial 13027# line) by an escape sequence. No info on this beast yet. 13028# (go140: I added <rmam>/<smam> based on the init string -- esr) 13029go140|graphon go-140, 13030 OTbs, 13031 cols#80, it#8, lines#24, 13032 clear=\E[H\E[2J$<10/>, cub1=^H, cuf1=\E[C, 13033 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 13034 ed=\E[J$<10/>, el=\E[K, ht=^I, 13035 if=/usr/share/tabset/vt100, il1=\E[L, 13036 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q, 13037 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 13038 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM, 13039 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 13040 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, 13041 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 13042go140w|graphon go-140 in 132 column mode, 13043 am, 13044 cols#132, 13045 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q, 13046 use=go140, 13047# Hacked up vt200 termcap to handle GO-225/VT220 13048# From: <edm@nwnexus.WA.COM> 13049# (go225: I added <rmam>/<smam> based on the init string -- esr) 13050go225|go-225|Graphon 225, 13051 OTbs, am, mir, xenl, 13052 cols#80, it#8, lines#25, vt#3, 13053 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, 13054 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 13055 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 13056 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED, 13057 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H, 13058 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 13059 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m, 13060 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l, 13061 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>, 13062 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w, 13063 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r, 13064 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, 13065 13066#### Harris (Beehive) 13067# 13068# Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine. 13069# Their terminal group is ancient history now (1995) though the parent 13070# company is still in business. 13071# 13072 13073# Beehive documentation is undated and marked Preliminary and has no figures 13074# so we must have early Superbee2 (Model 600, according to phone conversation 13075# with mfr.). It has proved reliable except for some missing padding 13076# (notably after \EK and <nl> at bottom of screen). 13077# 13078# The key idea is that AEP mode is poison for <cup> & that US's in 13079# the local memory should be avoided like the plague. That means 13080# that the 2048 character local buffer is used as 25 lines of 80 13081# characters, period. No scrolling local memory, folks. It also 13082# appears that we cannot use naked INS LINE feature since it uses 13083# US. The sbi fakes <il1> with an 80-space insert that may be too 13084# slow at low speeds; also spaces get converted to \040 which is 13085# too long for some programs (not vi). DEL LINE is ok but slow. 13086# 13087# The <nl> string is designed for last line of screen ONLY; cup to 13088# 25th line corrects the motion inherent in scrolling to Page 1. 13089# 13090# There is one understood bug. It is that the screen appears to 13091# pop to a new (blank) page after a <nel>, or leave a half-line 13092# ellipsis to a quad that is the extra 48 memory locations. The 13093# data received is dumped into memory but not displayed. Not to 13094# worry if <cup> is being used; the lines not displayed will be, 13095# whenever the cursor is moved up there. Since <cup> is addressed 13096# relative to MEMORY of window, nothing is lost; but beware of 13097# relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended, 13098# therefore, is setenv MORE -c . 13099# 13100# WARNING: Not all features tested. 13101# 13102# Timings are assembled from 3 sources. Some timings may reflect 13103# SB2/Model 300 that were used if more conservative. 13104# Tested on a Model 600 at 1200 and 9600 bd. 13105# 13106# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly 13107# placed on the keyboard and useless because of AEP, is made 13108# into a backspace key. In use ESC must be pressed twice (to send) 13109# and sending ^C must be prefixed by ESC to avoid that weird 13110# transmit mode associated with ENTER key. 13111# 13112# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across 13113# the screen, then it has dropped into ENTER mode; hit 13114# RESET--ONLINE--!tset. 13115# 13116# As delivered this machine has a FATAL feature that will throw 13117# it into that strange transmit state (SPOW) if the space bar is 13118# hit after a CR is received, but before receiving a LF (or a 13119# few others). 13120# 13121# The circuits MUST be modified to eliminate the SPOW latch. 13122# This is done by strapping on chip A46 of the I/O board; cut 13123# the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that 13124# chip. This mod has been checked out on a Mod 600 of Superbee II. 13125# With this modification absurdly high timings on cr are 13126# unnecessary. 13127# 13128# NOTE WELL that the rear panel switch should be set to CR/LF, 13129# not AEP! 13130# 13131sb1|beehive superbee, 13132 OTbs, am, bw, da, db, mir, ul, xsb, 13133 cols#80, lines#25, xmc#1, 13134 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r, 13135 cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d, 13136 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, 13137 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1, 13138 il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>, 13139 ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED, 13140 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK, 13141 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, 13142 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO, 13143 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER, 13144 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO, 13145 smso=\E_1, smul=\E_0, tbc=\E3, 13146sbi|superbee|beehive superbee at Indiana U., 13147 xsb, 13148 cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA, 13149 use=sb1, 13150# Alternate (older) description of Superbee - f1=escape, f2=^C. 13151# Note: there are at least 3 kinds of superbees in the world. The sb1 13152# holds onto escapes and botches ^C's. The sb2 is the best of the 3. 13153# The sb3 puts garbage on the bottom of the screen when you scroll with 13154# the switch in the back set to CRLF instead of AEP. This description 13155# is tested on the sb2 but should work on all with either switch setting. 13156# The f1/f2 business is for the sb1 and the <xsb> can be taken out for 13157# the other two if you want to try to hit that tiny escape key. 13158# This description is tricky: being able to use cup depends on there being 13159# 2048 bytes of memory and the hairy <nl> string. 13160superbee-xsb|beehive super bee, 13161 am, da, db, xsb, 13162 cols#80, it#8, lines#25, 13163 clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J, 13164 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>, 13165 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>, 13166 home=\EH, ht=^I, hts=\E1, 13167 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ, 13168 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq, 13169 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, 13170 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3, 13171# This loses on lines > 80 chars long, use at your own risk 13172superbeeic|super bee with insert char, 13173 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb, 13174sb2|sb3|fixed superbee, 13175 xsb@, use=superbee, 13176 13177#### Beehive Medical Electronics 13178# 13179# Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999): 13180# Regarding your question though; Beehive terminals weren't made by Harris. 13181# They were made by Beehive Medical Electronics in Utah. They went out of 13182# business in the early '80s. 13183# 13184# (OK, then, I don't know why a couple of these say "harris beehive".) 13185# 13186 13187# Reports are that most of these Beehive entries (except superbee) have not 13188# been tested and do not work right. <rmso> is a trouble spot. Be warned. 13189 13190# (bee: <ich1> was empty, which is obviously bogus -- esr) 13191beehive|bee|harris beehive, 13192 OTbs, am, mir, 13193 cols#80, lines#24, 13194 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, 13195 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, 13196 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>, 13197 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 13198 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL, 13199 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@, 13200 smir=\EQ, smso=\EdP, smul=\Ed`, 13201# set tab is ^F, clear (one) tab is ^V, no way to clear all tabs. 13202# good grief - does this entry make :sg:/:ug: when it doesn't have to? 13203# look at those spaces in <rmso>/<smso>. Seems strange to me... 13204# (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you 13205# really care, cook up one using ^F -- esr) 13206beehive3|bh3m|beehiveIIIm|harris beehive 3m, 13207 OTbs, am, 13208 cols#80, it#8, lines#20, 13209 bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K, 13210 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F, 13211 il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s, 13212beehive4|bh4|beehive 4, 13213 am, 13214 cols#80, lines#24, 13215 bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, 13216 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J, 13217# There was an early Australian kit-built computer called a "Microbee". 13218# It's not clear whether this is for one of those or for a relative 13219# of the Beehive. 13220microb|microbee|micro bee series, 13221 OTbs, am, 13222 cols#80, it#8, lines#24, 13223 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 13224 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 13225 el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 13226 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, 13227 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@, 13228 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`, 13229 13230# 8675, 8686, and bee from Cyrus Rahman 13231# (8675: changed k10, k11...k16 to k;, F1...F6 -- esr) 13232ha8675|harris 8675, 13233 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F, 13234 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei, 13235 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H, 13236 kf8=\177, kf9=\Ee, use=bee, 13237# (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation 13238# in :is: -- esr) 13239ha8686|harris 8686, 13240 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#, 13241 kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003, 13242 kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003, 13243 kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003, 13244 kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(, 13245 use=bee, 13246 13247#### Hazeltine 13248# 13249# Hazeltine appears to be out of the terminal business as of 1995. These 13250# guys were co-owners of the Terminal Brain Damage Hall Of Fame along with 13251# Harris. They have a hazeltine.com domain (but no web page there ) and can 13252# be reached at: 13253# 13254# Hazeltine 13255# 450 East Pulaski Road 13256# Greenlawn, New York 11740 13257# 13258# As late as 1993, manuals for the terminal product line could still be 13259# purchased from: 13260# 13261# TRW Customer Service Division 13262# 15 Law Drive 13263# P.O. Box 2076 13264# Fairfield, NJ 07007-2078 13265# 13266# They're now (1998) a subsidiary of General Electric, operating under the 13267# marque "GEC-Marconi Hazeltine" and doing military avionics. Web page 13268# at <http://www.gec.com/cpd/1ncpd.htm#1.55>. 13269# 13270 13271# Since <cuf1> is blank, when you want to erase something you 13272# are out of luck. You will have to do ^L's a lot to 13273# redraw the screen. h1000 is untested. It doesn't work in 13274# vi - this terminal is too dumb for even vi. (The code is 13275# there but it isn't debugged for this case.) 13276hz1000|hazeltine 1000, 13277 OTbs, 13278 cols#80, lines#12, 13279 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K, 13280 ind=^J, 13281# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981 13282hz1420|hazeltine 1420, 13283 OTbs, am, 13284 cols#80, lines#24, 13285 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P, 13286 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S, 13287 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y, 13288 smso=\E^_, 13289# New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents 13290# freakout with out-of-range args and tn3270. No hz since it needs to 13291# receive tildes. 13292hz1500|hazeltine 1500, 13293 OTbs, am, hz, 13294 cols#80, lines#24, 13295 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, 13296 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c, 13297 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R, 13298 il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P, 13299 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_, 13300# h1510 assumed to be in sane escape mode. Else use h1500. 13301# (h1510: early versions of this entry apparently had "<rmso=\E^_>, 13302# <smso=\E^Y>, but these caps were commented out in 8.3; also, 13303# removed incorrect and overridden ":do=^J:" -- esr) 13304hz1510|hazeltine 1510, 13305 OTbs, am, 13306 cols#80, lines#24, 13307 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P, 13308 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X, 13309 el=\E^O, il1=\E^Z, ind=^J, 13310# Hazeltine 1520 13311# The following switch settings are assumed for normal operation: 13312# FULL CR U/L_CASE ESCAPE 13313# FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON 13314# Other switches may be set for operator convenience or communication 13315# requirements. 13316hz1520|Hazeltine 1520, 13317 OTbs, am, bw, msgr, 13318 cols#80, lines#24, 13319 bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J, 13320 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, 13321 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H, 13322 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, 13323 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z, 13324 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_, 13325# This version works with the escape switch off 13326# (h1520: removed incorrect and overridden ":do=^J:" -- esr) 13327hz1520-noesc|hazeltine 1520, 13328 am, hz, 13329 cols#80, lines#24, 13330 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, 13331 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O, 13332 home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_, 13333# Note: the h1552 appears to be the first Hazeltine terminal which 13334# is not braindamaged. It has tildes and backprimes and everything! 13335# Be sure the auto lf/cr switch is set to cr. 13336hz1552|hazeltine 1552, 13337 OTbs, 13338 cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue, 13339 lf2=red, lf3=green, use=vt52, 13340hz1552-rv|hazeltine 1552 reverse video, 13341 cud1=^J, rmso=\ET, smso=\ES, use=hz1552, 13342# Note: h2000 won't work well because of a clash between upper case and ~'s. 13343hz2000|hazeltine 2000, 13344 OTbs, OTnc, am, 13345 cols#74, lines#27, 13346 bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J, 13347 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R, 13348 il1=~\032$<6>, ind=^J, pad=\177, 13349# Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote: 13350# I tested this termcap entry for the Hazeltine Esprit with vi. It seems 13351# to work ok. There is one problem though if one types a lot of garbage 13352# characters very fast vi seems not able to keep up and hangs while trying 13353# to insert. That's in insert mode while trying to insert in the middle of 13354# a line. It might be because the Esprit doesn't have insert char and delete 13355# char as a built in function. Vi has to delete to end of line and then 13356# redraw the rest of the line. 13357esprit|Hazeltine Esprit I, 13358 OTbs, am, bw, 13359 cols#80, lines#24, 13360 bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, 13361 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, 13362 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H, 13363 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J, 13364 kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J, 13365 kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R, 13366 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9, 13367 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_, 13368esprit-am|hazeltine esprit auto-margin, 13369 am, use=esprit, 13370# Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL 13371# Vi it seems always wants to send a control J for "do" and it turned out 13372# that the terminal would work somewhat if the auto LF/CR was turned off. 13373# (hmod1: removed :dn=~^K: -- esr) 13374hmod1|Hazeltine Modular 1, 13375 OTbs, am, hz, 13376 cols#80, lines#24, 13377 bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, 13378 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z, 13379 ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R, 13380 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_, 13381# 13382# Hazeltine Executive 80 Model 30 (1554?) 13383# from Will Martin <control@ALMSA-1.ARPA> via BRL 13384# Like VT100, except for different "am" behavior. 13385hazel|exec80|h80|he80|Hazeltine Executive 80, 13386 OTbs, OTpt, am, 13387 cols#80, it#8, lines#24, vt#3, 13388 OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 13389 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 13390 cub1=^H, cud1=^J, cuf1=\E[C$<2/>, 13391 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, 13392 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, 13393 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, 13394 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 13395 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>, 13396 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, 13397 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, 13398 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 13399 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>, 13400 smul=\E[4m$<2/>, 13401 13402#### IBM 13403# 13404 13405ibm327x|line mode IBM 3270 style, 13406 gn, 13407 clear=^M^J, el=^M, home=^M, 13408 13409ibm3101|i3101|IBM 3101-10, 13410 OTbs, am, xon, 13411 cols#80, lines#24, 13412 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 13413 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 13414 el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB, 13415 kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH, 13416ibm3151|IBM 3151 display, 13417 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B, 13418 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;, 13419 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162, 13420# From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992 13421# removed kend, knp, kpp -TD 13422ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display, 13423 OTbs, am, mir, msgr, 13424 cols#80, it#8, lines#24, 13425 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370, 13426 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED, 13427 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 13428 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J, 13429 invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1, 13430 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ, 13431 kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r, 13432 kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r, 13433 kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r, 13434 kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r, 13435 kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r, 13436 kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r, 13437 kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN, 13438 ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A, 13439 rmso=\E4@, rmul=\E4@, 13440 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;, 13441 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B, 13442 13443ibm3161-C|IBM 3161-C NLS terminal using cartridge, 13444 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161, 13445ibm3162|IBM 3162 display, 13446 blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a, 13447 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a, 13448 use=ibm3161-C, 13449 13450# This really should not use setab/setaf, but it is clear that the 13451# original terminfo does not toggle red/blue colors as in setb/setf. 13452ibm3164|i3164|IBM 3164, 13453 msgr, 13454 colors#8, pairs#64, 13455 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A, 13456 setab=\E4 %p1%{64}%+%c, 13457 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@, 13458 smcup=\E!9/N\E>B, use=ibm3161, 13459 13460ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display, 13461 am, bw, msgr, xon, 13462 cols#80, it#8, lines#25, 13463 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 13464 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 13465 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 13466 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 13467 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM, 13468 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, 13469 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 13470 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z, 13471 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 13472 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q, 13473 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q, 13474 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q, 13475 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q, 13476 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q, 13477 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q, 13478 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q, 13479 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q, 13480 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q, 13481 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, 13482 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q, 13483 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q, 13484 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l, 13485 rmso=\E[m, rmul=\E[m, rs2=\Ec, 13486 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m, 13487 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m, 13488 13489ibmaed|IBM Experimental display, 13490 OTbs, am, eo, msgr, 13491 cols#80, it#8, lines#52, 13492 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC, 13493 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 13494 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP, 13495 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 13496 rmso=\E0, sgr0=\E0, smso=\E0, 13497ibm-apl|apl|IBM apl terminal simulator, 13498 lines#25, use=dm1520, 13499# (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'. 13500# Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr) 13501ibmmono|IBM workstation monochrome, 13502 eslok, hs, 13503 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL, 13504 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET, 13505 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY, 13506 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG, 13507 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew, 13508 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo, 13509 use=ibm3101, 13510ibmega|IBM Enhanced Color Display, 13511 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, 13512 nel=^M^J, use=ibmmono, 13513# This color scheme is assumed in some recent IBM terminal descriptions 13514# (green on black, emulated on a 16-color terminal). 13515ibm+color|IBM color definitions, 13516 colors#8, ncv#3, pairs#64, 13517 op=\E[32m\E[40m, 13518 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;, 13519 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;, 13520ibm+16color|IBM aixterm color definitions, 13521 colors#16, pairs#256, 13522 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm, 13523 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm, 13524 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, 13525 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, 13526ibm5154|IBM 5154 Color display, 13527 colors#8, ncv@, pairs#64, 13528 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151, 13529 use=ibm+color, 13530ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline, 13531 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;, 13532 use=ibmmono, 13533ibmvga-c|IBM VGA display color termcap, 13534 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, 13535 nel=^M^J, use=ibmega-c, 13536ibmvga|IBM VGA display, 13537 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, 13538 nel=^M^J, use=ibmega, 13539# ibmapa* and ibmmono entries come from ACIS 4.3 distribution 13540rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display, 13541 lines#32, 13542 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono, 13543ibm6155|IBM 6155 Black & White display, 13544 blink@, bold@, use=ibm5151, 13545# Advanced Monochrome (6153) and Color (6154) Graphics Display: 13546ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display, 13547 lines#31, 13548 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono, 13549ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display, 13550 lines#31, 13551 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, 13552 use=ibmega-c, 13553ibm6154|IBM 6154 Color displays, 13554 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, 13555 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m, 13556 sgr0=\E[0;10m, use=ibm5154, 13557ibm6153|IBM 6153 Black & White display, 13558 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, 13559 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m, 13560 sgr0=\E[0;10m, use=ibm5151, 13561ibm6153-90|IBM 6153 Black & White display, 13562 cols#90, lines#36, 13563 blink@, bold@, use=ibm5151, 13564ibm6153-40|IBM 6153 Black & White display, 13565 cols#40, lines#12, use=ibm6153-90, 13566ibm8512|ibm8513|IBM color VGA Terminal, 13567 am, mir, msgr, 13568 cols#80, it#8, lines#25, 13569 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m, 13570 clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C, 13571 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, 13572 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL, 13573 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A, 13574 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, 13575 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, 13576 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m, 13577 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l, 13578 rmir=\E[4l, rmso=\E[m, rmul=\E[m, 13579 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m, 13580 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb, 13581 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m, 13582 use=ibm8503, 13583hft-c|HFT with Color, 13584 colors#8, pairs#64, 13585 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0, 13586 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B, 13587 use=ibm5151, use=ibm+color, 13588hft-c-old|HFT with Color PC850, 13589 colors#8, pairs#64, 13590 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151, 13591 use=ibm+color, 13592hft-old|AIWS High Function Terminal, 13593 am, xon, 13594 cols#80, lines#25, 13595 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 13596 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 13597 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 13598 ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, 13599 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 13600 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q, 13601 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, 13602 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q, 13603 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m, 13604 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color, 13605ibm-system1|system1|ibm system/1 computer, 13606 am, xt, 13607 cols#80, lines#24, 13608 bel=^G, clear=^Z, cub1=^H, cuf1=^\, 13609 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K, 13610 ind=^J, 13611# lft-pc850 : IBM Low Function Terminal Device 13612# lft "supports" underline, bold, and blink in the sense that the lft code 13613# sets all the right bits. HOWEVER, depending upon the adapter, these 13614# attributes may or may not be supported by the device driver. 13615lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device, 13616 am, bw, msgr, xon, 13617 cols#80, it#8, lines#25, 13618 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 13619 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 13620 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 13621 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 13622 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 13623 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K, 13624 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL, 13625 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, 13626 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, 13627 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, 13628 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q, 13629 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, 13630 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, 13631 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, 13632 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, 13633 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, 13634 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, 13635 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, 13636 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, 13637 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, 13638 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q, 13639 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT, 13640 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec, 13641 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, 13642 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m, 13643 tbc=\E[3g, 13644ibm5081|hft|IBM Megapel Color display, 13645 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B, 13646 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154, 13647ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display, 13648 eslok, hs, 13649 lines#33, 13650 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo, 13651 use=ibmega-c, 13652ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display, 13653 use=hft-c, 13654ibm8514|IBM 8514/a color VGA display, 13655 eslok, hs, 13656 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft, 13657ibm8514-c|IBM 8514 color display with standout and underline, 13658 eslok, hs, 13659 lines#41, 13660 cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J, 13661 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo, 13662 use=ibmega-c, 13663 13664# 13665# AIX entries. IBM ships these with AIX 3.2.5. 13666# -- added rc, sc based on manpage -TD 13667# Note that we could use ibm+16color, but that is not how IBM defines this one. 13668aixterm|IBM Aixterm Terminal Emulator, 13669 eslok, hs, 13670 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E, 13671 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7, 13672 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, 13673 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154, 13674aixterm-m|IBM AIXterm Monochrome Terminal Emulator, 13675 eslok, hs, 13676 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E, 13677 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0, 13678 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, 13679 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153, 13680aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator, 13681 eslok, hs, 13682 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@, 13683 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, 13684 tsl=\E[?%p1%dT, use=ibm6153, 13685jaixterm|IBM Kanji Aixterm Terminal Eemulator, 13686 acsc@, use=aixterm, 13687jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator, 13688 acsc@, use=aixterm-m, 13689 13690# This flavor is adapted from xterm, in turn from aixterm documentation -TD 13691aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors, 13692 use=ibm+16color, use=aixterm, 13693 13694#### Infoton/General Terminal Corp. 13695# 13696 13697# gt100 sounds like something DEC would come out with. Let's hope they don't. 13698i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100), 13699 OTbs, am, 13700 cols#80, lines#24, 13701 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 13702 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM, 13703 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL, 13704 ind=^J, rmso=\Ea, smso=\Eb, 13705i400|infoton 400, 13706 OTbs, am, 13707 cols#80, lines#25, 13708 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 13709 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A, 13710 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N, 13711 il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q, 13712# (addrinfo: removed obsolete ":bc=^Z:" -- esr) 13713addrinfo, 13714 am, 13715 cols#80, lines#24, 13716 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, 13717 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\, 13718# (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr) 13719infoton, 13720 am, 13721 cols#80, lines#24, 13722 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\, 13723 ed=^K, ind=^J, ll=^H^\, 13724 13725# The ICL6402 was actually the Kokusai Display System 6402. 13726# The 6404 was the KDS7372 (color version of the 6402). 13727# 13728# ICL6404 control codes follow: 13729# 13730#code function 13731#~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 13732#ctrl-A set SOM position at cursor position 13733#ctrl-G Bell 13734#ctrl-H Backspace 13735#ctrl-I Horiz tab 13736#ctrl-J Linefeed 13737#ctrl-K Cursor up 13738#ctrl-L Cursor right 13739#ctrl-M Carriage return 13740#ctrl-N Disable xon/xoff to host 13741#ctrl-O Enable xon/xoff to host 13742#ctrl-R Enable bidirectional mode 13743#ctrl-T Disable bidirectional mode 13744#ctrl-V Cursor down 13745#ctrl-Z Clear unprotected data to insert char 13746#ctrl-^ Cursor home 13747#ctrl-_ Newline 13748# 13749#ESC lead-in char for multiple character command 13750# 13751#ESC space R execute power on sequence 13752#ESC ! p1 p2 define scroll region: 13753# p1 = scroll top line: 20h - 37h 13754# p1 = scroll bottom line: 20h - 37h 13755#ESC " unlock keyboard 13756#ESC # lock keyboard 13757#ESC $ Semi-graphics mode on 13758#ESC % Semi-graphics mode off 13759#ESC & protect mode on 13760#ESC ' protect mode off 13761#ESC ( write protect mode off (full intensity) 13762#ESC ) write protect mode on (half intensity) 13763# 13764#ESC * clear screen 13765#ESC + clear unprotected data to insert char 13766#ESC , clear unprotected data to half intensity spaces 13767#ESC - p1 p2 p3 p4 address cursor to page, row, column: 13768# p1 = page number 0 - 3 13769# p2 = row 20h - 7fh 13770# p3 = column (lo) 20h - 7fh 13771# p4 = column (hi) 20h - 21h (only 132 col) 13772#ESC . p1 set cursor style: 13773# p1 = 0 invisible cursor 13774# p1 = 1 block blinking cursor 13775# p1 = 2 block steady cursor 13776# p1 = 3 underline blinking cursor 13777# p1 = 4 underline steady cursor 13778#ESC / transmit cursor location (page, row, column) 13779#ESC 0 p1 p2 p3 p4 program edit key: 13780# p1 = edit key code: '@'-'S', '`'-'s' 13781# p2 p3 p4 = program data (3 bytes) 13782# 13783#ESC 1 set tab 13784#ESC 2 clear tab at cursor 13785#ESC 3 clear all tabs 13786#ESC 4 send unprotect line to cursor 13787#ESC 5 send unprotect page to cursor 13788#ESC 6 send line to cursor 13789#ESC 7 send page to cursor 13790#ESC 8 n set scroll mode: 13791# n = 0 set jump scroll 13792# n = 1 set smooth scroll 13793#ESC 9 n control display: 13794# n = 0 display off 13795# n = 1 display on 13796#ESC : clear unprotected data to null 13797#ESC ; clear unprotected data to insert char 13798# 13799#ESC < keyclick on 13800#ESC = p1 p2 address cursor to row, column 13801# p1 = row 20h - 7fh 13802# p2 = column (lo) 20h - 7fh 13803# p3 = column (hi) 20h - 21h (only 132 col) 13804#ESC > keyclick off 13805#ESC ? transmit cursor location (row, column) 13806# 13807#ESC @ copy print mode on 13808#ESC A copy print mode off 13809#ESC B block mode on 13810#ESC C block mode off (conversation mode) 13811#ESC D F set full duplex 13812#ESC D H set half duplex 13813#ESC E line insert 13814#ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd) 13815# 0 = black, 1 = red, 2 = green, 3 = yellow 13816# 4 = blue, 5 = magenta, 6 = cyan, 7 = white 13817#ESC G n set serial field attribute (n = 30h - 3Fh) 13818#ESC H n full graphics mode: 13819# n = 0 exit full graphics mode 13820# n = 1 enter full graphics mode 13821#ESC I back tab 13822#ESC J back page 13823#ESC K forward page 13824# 13825#ESC L unformatted page print 13826#ESC M L move window left (132 col mode only) 13827#ESC M R move window right (132 col mode only) 13828#ESC N set page edit (clear line edit) 13829#ESC O set line edit (clear page edit) 13830#ESC P formatted page print 13831#ESC Q character insert 13832#ESC R line delete 13833#ESC S send message unprotected only 13834#ESC T erase line to insert char 13835#ESC U set monitor mode (see ESC X, ESC u) 13836# 13837#ESC V n select video attribute mode: 13838# n = 0 serial field attribute mode 13839# n = 1 parallel character attribute mode 13840#ESC V 2 n define line attribute: 13841# n = 0 single width single height 13842# n = 1 single width double height 13843# n = 2 double width single height 13844# n = 3 double width double height 13845#ESC V 3 n select character font: 13846# n = 0 system font 13847# n = 1 user defined font 13848#ESC V 4 n select screen mode: 13849# n = 0 page screen mode 13850# n = 1 virtual screen mode 13851#ESC V 5 n control mouse mode: 13852# n = 0 disable mouse 13853# n = 1 enable sample mode 13854# n = 2 send mouse information 13855# n = 3 enable request mode 13856#ESC W character delete 13857#ESC X clear monitor mode (see ESC U, ESC u) 13858#ESC Y erase page to insert char 13859# 13860#ESC Z n send user/status line: 13861# n = 0 send user line 13862# n = 1 send status line 13863# n = 2 send terminal ID 13864#ESC [ p1 p2 p3 set character attribute (parallel char mode): 13865# p1: 0 = normal 13866# 1 = blank 13867# 2 = blink 13868# 3 = blink blank (= blank) 13869# 4 = reverse 13870# 5 = reverse blank 13871# 6 = reverse blink 13872# 7 = reverse blink blank (= reverse blank) 13873# 8 = underline 13874# 9 = underline blank 13875# : = underline blink 13876# ; = underline blink blank 13877# < = reverse underline 13878# = = reverse underline blank 13879# > = reverse underline blink 13880# ? = reverse underline blink blank 13881# p2, p3: f/grnd, b/grnd colour 13882# (see ESC F for colours) 13883# use ZZ for mono, eg. 13884# ESC [ 0 Z Z for normal 13885# ESC [ 4 Z Z for inverse etc. 13886# 13887#ESC \ n set page size: 13888# n = 1 24 lines/page 13889# n = 2 48 lines/page 13890# n = 3 72 lines/page 13891# n = 4 96 lines/page 13892#ESC ] n set Wordstar mode: 13893# n = 0 normal (KDS7372) mode 13894# n = 1 Wordstar mode 13895# 13896#ESC b set foreground colour screen 13897# 13898#ESC c n enter self-test mode: 13899# n = 0 exit self test mode 13900# n = 1 ROM test 13901# n = 2 RAM test 13902# n = 3 NVRAM test 13903# n = 4 screen display test 13904# n = 5 main/printer port test 13905# n = 6 mouse port test 13906# n = 7 graphics board test 13907# n = 8 graphics memory test 13908# n = 9 display all 'E' 13909# n = : display all 'H' 13910#ESC d set background colour screen 13911# 13912#ESC e n program insert char (n = insert char) 13913#ESC f text CR load user status line with 'text' 13914# 13915#ESC g display user status line on 25th line 13916#ESC h display system status line on 25th line 13917#ESC i tab 13918#ESC j reverse linefeed 13919#ESC k n duplex/local edit mode: 13920# n = 0 duplex edit mode 13921# n = 1 local edit mode 13922#ESC l n select virtual screen: 13923# n = 0 screen 1 13924# n = 1 screen 2 13925#ESC m save current config to NVRAM 13926#ESC n p1 select display screen: 13927# p1 = 0 screen 1 13928# p1 = 1 screen 2 13929# p1 = 2 screen 3 13930# p1 = 3 screen 4 13931#ESC o p1 p2 set characters/line and attribute: 13932# p1 = 0 80 chars/line 13933# 13934#ESC o p1 p2 set characters/line and attribute: 13935# p1 = 0 80 chars/line 13936# p1 = 1 132 chars/line 13937# p2 = 0 single width single height 13938# p2 = 1 single width double height 13939# p2 = 2 double width single height 13940# p2 = 3 double width double height 13941# 13942#ESC q insert mode on 13943#ESC r edit mode on 13944#ESC s send message all 13945#ESC t erase line to null 13946#ESC u clear monitor mode (see ESC U, ESC X) 13947#ESC v autopage mode on 13948#ESC w autopage mode off 13949#ESC x p1 p2 p3 define delimiter code... 13950#ESC y erase page to null 13951# 13952#ESC z 2 p1 p2 p3 p4 draw quadrangle: 13953# p1 = starting row 13954# p2 = starting column 13955# p3 = end row 13956# p4 = end column 13957# 13958#ESC { p1 p2 p3 p4 configure main port 13959# (baud, stop bits, parity, word length) 13960# 13961#ESC | p1 p2 text Ctrl-Y program function key with 'text': 13962# p1 = function key code: 13963# '1' - ';' normal f1- f11 13964# '<' - 'F' shifted f1 - f11 13965# p2 = program mode: 13966# 1 = FDX 13967# 2 = LOC 13968# 3 = HDX 13969# Ctrl-Y = terminator 13970# (use Ctrl-P to escape ^P, ^Y ) 13971# 13972#ESC } p1 p2 p3 p4 configure printer port 13973# (baud, stop bits, parity, word length) 13974#ESC ~ send system status 13975# 13976# Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997 13977# 13978# Entry is by esr going solely on above information and is UNTESTED. 13979# This actually looks a lot like a Televideo 9xx. 13980# This entry uses page 0 and is monochrome; I'm not brave enough to try 13981# to make color work without a test terminal. The <am> capability is a guess. 13982# The initialization string sets conversation mode, blinking underline cursor, 13983# full duplex, parallel attribute mode, display user status line, white 13984# foreground, black background, normal highlight. 13985# 13986icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372, 13987 OTbs, am, hs, 13988 cols#80, lines#24, 13989 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*, 13990 cnorm=\E.3, cr=^M, 13991 csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L, 13992 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c, 13993 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I, 13994 hts=\E1, il1=\EE, invis=\E[1ZZ, 13995 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ, 13996 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ, 13997 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1, 13998 sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ, 13999 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3, 14000icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols, 14001 rs2=\Eo1, use=icl6404, 14002 14003#### Interactive Systems Corp 14004# 14005# ISC used to sell OEMed and customized hardware to support ISC UNIX. 14006# ISC UNIX still exists in 1995, but ISC itself is no more; they got 14007# bought out by Sun. 14008# 14009 14010# From: <cithep!eric> Wed Sep 16 08:06:44 1981 14011# (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the 14012# ":le=^_:" later overridden -- esr) 14013intext|Interactive Systems Corporation modified owl 1200, 14014 OTbs, am, 14015 cols#80, it#8, lines#24, xmc#1, 14016 bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J, 14017 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\, 14018 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>, 14019 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H, 14020 kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r, 14021 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r, 14022 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<, 14023 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%, 14024 smso=^V$\,, 14025intext2|intextii|INTERACTIVE modified owl 1251, 14026 am, bw, ul, 14027 cols#80, lines#24, xmc#0, 14028 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cud1=\E[B, 14029 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, 14030 dl1=\E[M, ed=\E[J, el=\E[K, 14031 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u, 14032 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S, 14033 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r, 14034 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r, 14035 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r, 14036 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO, 14037 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT, 14038 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D, 14039 smul=\E[18 D, 14040 14041#### Kimtron (abm, kt) 14042# 14043# Kimtron seems to be history, but as March 1998 these people are still 14044# offering repair services for Kimtron equipment: 14045# 14046# Com/Pair Monitor Service 14047# 1105 N. Cliff Ave. 14048# Sioux Falls, South Dakota 57103 14049# 14050# WATS voice: 1-800/398-4946 14051# POTS fax: +1 605/338-8709 14052# POTS voice: +1 605/338-9650 14053# Email: <compair@sd.cybernex.net> 14054# Internet/Web: <http://www.com-pair.com> 14055# 14056# Kimtron entries include (undocumented) codes for: enter dim mode, 14057# enter bold mode, enter reverse mode, turn off all attributes. 14058# 14059 14060# Kimtron ABM 85 added by Dual Systems 14061# (abm85: removed duplicated ":kd=^J:" -- esr) 14062abm85|Kimtron ABM 85, 14063 OTbs, am, bw, msgr, 14064 cols#80, it#8, lines#24, xmc#1, 14065 cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L, 14066 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 14067 dl1=\ER, ed=\Ey, el=\Et, ht=^I, 14068 if=/usr/share/tabset/stdcrt, il1=\EE, 14069 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H, 14070 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek, 14071 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El, 14072# Kimtron ABM 85H added by Dual Systems. 14073# Some notes about the abm85h entries: 14074# 1) there are several firmware revs of 85H in the world. Use abm85h-old for 14075# firmware revs prior to SP51 14076# 2) Make sure to use abm85h entry if the terminal is in 85h mode and the 14077# abm85e entry if it is in tvi920 emulation mode. They are incompatible 14078# in some places and NOT software settable i.e., <is2> can't fix it) 14079# 3) In 85h mode, the arrow keys and special functions transmit when 14080# the terminal is in dup-edit, and work only locally in local-edit. 14081# Vi won't swallow `del char' for instance, but <smcup> turns on 14082# dup-edit anyway so that the arrow keys will work right. If the 14083# arrow keys don't work the way you like, change <smcup>, <rmcup>, and 14084# <is2>. Note that 920E mode does not have software commands to toggle 14085# between dup and local edit, so you get whatever was set last on the 14086# terminal. 14087# 4) <flash> attribute is nice, but seems too slow to work correctly 14088# (\Eb<pad>\Ed) 14089# 5) Make sure `hidden' attributes are selected. If `embedded' attributes 14090# are selected, the <xmc@> entry should be removed. 14091# 6) auto new-line should be on (selectable from setup mode only) 14092# 14093# From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985 14094abm85h|Kimtron ABM 85H native mode, 14095 hs, 14096 xmc@, 14097 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@, 14098 fsl=^M, invis@, 14099 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El, 14100 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr, 14101 use=abm85, 14102abm85e|Kimtron ABM 85H in 920E mode, 14103 xmc@, 14104 bel=^G, dim=\E), flash@, 14105 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em, 14106 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85, 14107abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev., 14108 xmc@, 14109 bel=^G, dim=\E), 14110 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF, 14111 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85, 14112# From: <malman@bbn-vax.arpa> 14113# (kt7: removed obsolete :ma=^V^J^L :" -- esr) 14114kt7|kimtron model kt-7, 14115 OTbs, am, 14116 cols#80, it#8, lines#24, 14117 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L, 14118 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 14119 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, 14120 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E", 14121 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, 14122 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, 14123 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 14124 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 14125 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr, 14126# Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the 14127# other kt7 entry and the adjacent key capabilities). Removed EE which is 14128# identical to :mh:. Removed :ES=\EGD: which is some kind of highlight 14129# but we can't figure out what. 14130kt7ix|kimtron model kt-7 or 70 in IX mode, 14131 am, bw, 14132 cols#80, it#8, lines#25, 14133 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI, 14134 civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, 14135 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 14136 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M, 14137 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J, 14138 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*, 14139 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER, 14140 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, 14141 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 14142 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ, 14143 nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0, 14144 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef, 14145 14146#### Microdata/MDIS 14147# 14148# This was a line of terminals made by McDonnell-Douglas Information Systems. 14149# These entries come direct from MDIS documentation. I have edited them only 14150# to move primary names of the form p[0-9] * to aliases, and to comment out 14151# <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have 14152# also removed the change history; the last version indicates this is 14153# version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989). 14154# 14155 14156# McDonnell Information Systems Terminal Family History 14157# ========================================= 14158# 14159# Prism-1, Prism-2 and P99: 14160# Ancient Microdata and CMC terminals, vaguely like Adds Regent 25. 14161# 14162# Prism-4 and Prism-5: 14163# Slightly less ancient range of Microdata terminals. Follow-on from 14164# Prism-2, but with many enhancements. P5 has eight display pages. 14165# 14166# Prism-6: 14167# A special terminal for use with library systems, primarily in Germany. 14168# Limited numbers. Similar functionality to P5 (except attributes?). 14169# 14170# Prism-7, Prism-8 and Prism-9: 14171# More recent range of MDIS terminals, in which P7 and P8 14172# replace the P4 & P5, with added functionality, and P9 is the flagship. 14173# The P9 has two emulation modes - P8 and ANSI - and includes a 14174# large number of the DEC VT220 control sequences. Both 14175# P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats. 14176# 14177# Prism-12 and Prism-14: 14178# Latest range, functionally very similar to the P9. The P14 has a 14179# black-on-white overscanning screen. 14180# 14181# The terminfo definitions given here are: 14182# 14183# p2 - Prism-2 (or Prism-1 or P99). 14184# 14185# p4 - Prism-4 (and older P7s & P8s). 14186# p5 - Prism-5 (or Prism-6). 14187# 14188# p7 - Prism-7. 14189# p8 - Prism-8 (in national or multinational mode). 14190# p8-w - 132 column version of p8. 14191# p9 - Prism-9 in ANSI mode. 14192# p9-w - 132 column version of p9. 14193# p9-8 - Prism-9 in Prism-8 emulation mode. 14194# p9-8-w - As p9-8, but with 132 columns. 14195# 14196# p12 - Prism-12 in ANSI mode. 14197# p12-w - 132 column version of p12. 14198# p12-m - Prism-12 in MDC emulation mode. 14199# p12-m-w - As p12-m, but with 132 columns. 14200# p14 - Prism-14 in ANSI mode. 14201# p14-w - 132 column version of p14. 14202# p14-m - Prism-14 in MDC emulation mode. 14203# p14-m-w - As p14-m, but with 132 columns. 14204# 14205# p2: Prism-2 14206# ----------- 14207# 14208# Includes Prism-1 and basic P99 without SP or MP loaded. 14209# The simplest form of Prism-type terminal. 14210# Basic cursor movement and clearing operations only. 14211# No video attributes. 14212# Notes: 14213# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next 14214# value up, followed by backspace. 14215# 14216prism2|MDC Prism-2, 14217 am, bw, msgr, 14218 cols#80, lines#24, 14219 bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 14220 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 14221 cuu1=^Z, ed=\EJ, el=\EK, home=^A, 14222 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 14223 ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c, 14224 14225# p4: Prism-4 14226# ----------- 14227# 14228# Includes early versions of P7 & P8. 14229# Basic family definition for most Prisms (except P2 and P9 ANSI). 14230# Notes: 14231# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next 14232# value up, followed by backspace. 14233# Cursor key definitions removed because they interfere with vi and csh keys. 14234# 14235prism4|p4|P4|MDC Prism-4, 14236 am, bw, hs, mc5i, msgr, 14237 cols#80, lines#24, wsl#72, xmc#1, 14238 bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>, 14239 cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 14240 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 14241 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK, 14242 fsl=^]\345, home=^A, 14243 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 14244 ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER, 14245 rev=^CD, rmso=^C\s, rmul=^C\s, 14246 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;, 14247 sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343, 14248 vpa=\013%p1%{32}%+%c, 14249 14250# p5: Prism-5 14251# ----------- 14252# 14253# Same definition as p4. Includes Prism-6 (not tested!). 14254# Does not use any multi-page features. 14255# 14256prism5|p5|P5|MDC Prism-5, 14257 use=p4, 14258 14259# p7: Prism-7 14260# ----------- 14261# 14262# Similar definition to p4. Uses ANSI cursor motion to avoid network problems. 14263# Notes: 14264# Use p4 for very early models of P7. 14265# Rev-index removed; can't send nulls to terminal in 8-bit modes. 14266# 14267prism7|p7|P7|MDC Prism-7, 14268 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4, 14269 14270# p8: Prism-8 14271# ----------- 14272# 14273# Similar definition to p7. Uses ANSI cursor motion to avoid network problems. 14274# Supports national and multinational character sets. 14275# Notes: 14276# Alternate char set operations only work in multinational mode. 14277# Use p4 for very early models of P8. 14278# Rev-index removed; can't send nulls to terminal in 8-bit modes. 14279# (esr: commented out <smacs>/<rmacs> because there's no <acsc>) 14280# 14281prism8|p8|P8|MDC Prism-8, 14282 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h, 14283 vpa=\E[%i%p1%dd, use=p4, 14284 14285# p8-w: Prism-8 in 132 column mode 14286# -------------------------------- 14287# 14288# 'Wide' version of p8. 14289# Notes: 14290# Rev-index removed; can't send nulls to terminal in 8-bit modes. 14291# 14292prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode, 14293 cols#132, 14294 is2=\E[<12h\E[<14h, use=p8, 14295 14296# p9: Prism-9 in ANSI mode 14297# ------------------------- 14298# 14299# The "flagship" model of this generation of terminals. 14300# ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones. 14301# Notes: 14302# Tabs only reset by "reset". Otherwise assumes default (8 cols). 14303# Fixes to deal with terminal firmware bugs: 14304# . 'ri' uses insert-line since rev index doesn't always 14305# . 'sgr0' has extra '0' since esc[m fails 14306# . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25 14307# Not covered in the current definition: 14308# . Labels 14309# . Programming Fn keys 14310# . Graphic characters (defaults correctly to vt100) 14311# . Padding values (sets xon) 14312# (esr: commented out <smacs>/<rmacs> because there's no <acsc>) 14313# 14314prism9|p9|P9|MDC Prism-9 in ANSII mode, 14315 am, bw, hs, mc5i, msgr, xenl, xon, 14316 cols#80, it#8, lines#24, vt#3, wsl#72, 14317 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l, 14318 clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v, 14319 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 14320 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 14321 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 14322 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX, 14323 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`, 14324 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, 14325 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D, 14326 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~, 14327 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 14328 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 14329 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, 14330 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 14331 khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, 14332 prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m, 14333 ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 14334 rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N, 14335 sc=\E[%y, 14336 sgr=\E[%{0}%?%p1%p3%|%t%{7}%+%;%?%p2%t%{2}%+%;%?%p4%t%{5}%+%;%?%p6%t%{1}%+%;m%?%p8%t\E[%{32}%+%d%%{%;%?%p9%t\016%e\017%;, 14337 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m, 14338 tbc=\E[2g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd, 14339 14340# p9-w: Prism-9 in 132 column mode 14341# -------------------------------- 14342# 14343# 'Wide' version of p9. 14344# 14345prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode, 14346 cols#132, 14347 is2=\E[&p\E[<12l\E F\E[<14h, 14348 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9, 14349 14350# p9-8: Prism-9 in P8 mode 14351# ------------------------ 14352# 14353# P9 terminal in P8 emulation mode. 14354# Similar to p8 definition. 14355# Insertion and deletion operations possible. 14356# 14357prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode, 14358 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 14359 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8, 14360 14361# p9-8-w: Prism-9 in P8 and 132 column modes 14362# ------------------------------------------ 14363# 14364# P9 terminal in P8 emulation mode and 132 column mode. 14365# 14366prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode, 14367 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 14368 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w, 14369 14370# p12: Prism-12 in ANSI mode 14371# --------------------------- 14372# 14373# See p9 definition. 14374# 14375prism12|p12|P12|MDC Prism-12 in ANSI mode, 14376 use=p9, 14377 14378# p12-w: Prism-12 in 132 column mode 14379# ---------------------------------- 14380# 14381# 'Wide' version of p12. 14382# 14383prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode, 14384 use=p9-w, 14385 14386# p12-m: Prism-12 in MDC emulation mode 14387# ------------------------------------- 14388# 14389# P12 terminal in MDC emulation mode. 14390# Similar to p8 definition. 14391# Insertion and deletion operations possible. 14392# 14393prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode, 14394 use=p9-8, 14395 14396# p12-m-w: Prism-12 in MDC emulation and 132 column modes 14397# ------------------------------------------------------- 14398# 14399# P12 terminal in MDC emulation mode and 132 column mode. 14400# 14401prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode, 14402 use=p9-8-w, 14403 14404# p14: Prism-14 in ANSII mode 14405# --------------------------- 14406# 14407# See p9 definition. 14408# 14409prism14|p14|P14|MDC Prism-14 in ANSII mode, 14410 use=p9, 14411 14412# p14-w: Prism-14 in 132 column mode 14413# ---------------------------------- 14414# 14415# 'Wide' version of p14. 14416# 14417prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode, 14418 use=p9-w, 14419 14420# p14-m: Prism-14 in MDC emulation mode 14421# ------------------------------------- 14422# 14423# P14 terminal in MDC emulation mode. 14424# Similar to p8 definition. 14425# Insertion and deletion operations possible. 14426# 14427prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode, 14428 use=p9-8, 14429 14430# p14-m-w: Prism-14 in MDC emulation and 132 column modes 14431# ------------------------------------------------------- 14432# 14433# P14 terminal in MDC emulation mode and 132 column mode. 14434# 14435prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode, 14436 use=p9-8-w, 14437 14438# End of McDonnell Information Systems Prism definitions 14439 14440# These things were popular in the Pick database community at one time 14441# From: George Land <georgeland@aol.com> 24 Sep 1996 14442p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition, 14443 am, bw, hs, mir, 14444 cols#80, lines#24, ma#1, wsl#78, xmc#1, 14445 bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, 14446 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P, 14447 ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U, 14448 kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ, 14449 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r, 14450 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r, 14451 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 14452 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2, 14453 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M, 14454 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE, 14455 smul=^C0, 14456 14457#### Microterm (act, mime) 14458# 14459# The mime1 entries refer to the Microterm Mime I or Mime II. 14460# The default mime is assumed to be in enhanced act iv mode. 14461# 14462 14463# New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents 14464# freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and 14465# <rmso=^N> since it gets confused and it's too dim anyway. No <ich1> 14466# since Sytek insists ^S means xoff. 14467# (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr) 14468act4|microterm|microterm act iv, 14469 OTbs, am, 14470 cols#80, lines#24, 14471 bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X, 14472 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c, 14473 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>, 14474 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^], 14475 il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X, 14476 kcuu1=^Z, 14477# The padding on :sr: and :ta: for act5 and mime is a guess and not final. 14478# The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)... 14479# (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr) 14480act5|microterm5|microterm act v, 14481 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA, 14482 use=act4, 14483# Mimes using brightness for standout. Half bright is really dim unless 14484# you turn up the brightness so far that lines show up on the screen. 14485mime-fb|full bright mime1, 14486 is2=^S\E, rmso=^S, smso=^Y, use=mime, 14487mime-hb|half bright mime1, 14488 is2=^Y\E, rmso=^Y, smso=^S, use=mime, 14489# (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode 14490# the more plausible ":do=^J:" -- esr) 14491# uc was at one time disabled to get around a curses bug, be wary of it 14492mime|mime1|mime2|mimei|mimeii|microterm mime1, 14493 OTbs, am, 14494 cols#80, it#8, lines#24, vt#9, 14495 bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X, 14496 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c, 14497 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>, 14498 il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K, 14499 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U, 14500# These termcaps (for mime2a) put the terminal in low intensity mode 14501# since high intensity mode is so obnoxious. 14502mime2a-s|microterm mime2a (emulating an enhanced soroc iq120), 14503 OTbs, am, 14504 cols#80, lines#24, 14505 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 14506 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED, 14507 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^, 14508 il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J, 14509 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7, 14510 smir=\EE, smso=\E\:, smul=\E6, 14511# This is the preferred mode (but ^X can't be used as a kill character) 14512mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52), 14513 OTbs, 14514 cols#80, it#8, lines#24, 14515 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 14516 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N, 14517 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I, 14518 il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED, 14519 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9, 14520 rmul=\E5, smir=^O, smso=\E8, smul=\E4, 14521# (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr) 14522mime3a|mime1 emulating 3a, 14523 am@, 14524 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a, 14525mime3ax|mime-3ax|mime1 emulating enhanced 3a, 14526 it#8, 14527 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>, 14528 use=mime3a, 14529# Wed Mar 9 18:53:21 1983 14530# We run our terminals at 2400 baud, so there might be some timing problems at 14531# higher speeds. The major improvements in this model are the terminal now 14532# scrolls down and insert mode works without redrawing the rest of the line 14533# to the right of the cursor. This is done with a bit of a kludge using the 14534# exit graphics mode to get out of insert, but it does not appear to hurt 14535# anything when using vi at least. If you have some users using act4s with 14536# programs that use curses and graphics mode this could be a problem. 14537mime314|mm314|mime 314, 14538 am, 14539 cols#80, lines#24, 14540 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z, 14541 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H, 14542 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S, 14543# Microterm mime 340 from University of Wisconsin 14544mm340|mime340|mime 340, 14545 cols#80, lines#24, 14546 clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 14547 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 14548 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>, 14549 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,, 14550 kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J, 14551# This came from University of Wisconsin marked "astro termcap for jooss". 14552# (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:"; 14553# also added <rmam>/<smam> based on the init string -- esr) 14554mt4520-rv|micro-term 4520 reverse video, 14555 am, hs, msgr, xenl, xon, 14556 cols#80, it#8, lines#24, wsl#80, 14557 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M, 14558 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 14559 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 14560 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 14561 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 14562 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h, 14563 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 14564 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 14565 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J, 14566 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 14567 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, 14568 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100, 14569 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m, 14570 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J, 14571 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, 14572 tbc=\E[g, tsl=\E[25;1H, 14573 14574# Fri Aug 5 08:11:57 1983 14575# This entry works for the ergo 4000 with the following setups: 14576# ansi,wraparound,newline disabled, xon/xoff disabled in both 14577# setup a & c. 14578# 14579# WARNING!!! There are multiple versions of ERGO 4000 microcode 14580# Be advised that very early versions DO NOT WORK RIGHT !! 14581# Microterm does have a ROM exchange program- use it or lose big 14582# (ergo400: added <rmam>/<smam> based on the init string -- esr) 14583ergo4000|microterm ergo 4000, 14584 da, db, msgr, 14585 cols#80, lines#66, 14586 bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B, 14587 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 14588 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>, 14589 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>, 14590 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>, 14591 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 14592 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3, 14593 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l, 14594 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>, 14595 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>, 14596 smso=\E[7m$<20>, 14597 14598#### NCR 14599# 14600# NCR's terminal group was merged with AT&T's when AT&T bought the company. 14601# For what happened to that group, see the ADDS section. 14602# 14603# There is an NCR4103 terminal that's just a re-badged Wyse-50. 14604# 14605 14606# The following vendor-supplied termcaps were captured from the Boundless 14607# Technologies site, 8 March 1998. I removed all-upper-case names that were 14608# identical, except for case, to lower-case ones. I also uncommented the acsc 14609# capabilities.X 14610# 14611# The Intecolor emulation of the NCR 2900/260C color terminal is basically a 14612# DEC vt200/300 with color capabilities added. 14613ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard, 14614 colors#8, pairs#64, 14615 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 14616 use=ncr260vt300an, 14617# The Intecolor emulation of the NCR 2900/260C color terminal is basically a 14618# DEC vt200/300 with color capabilities added. 14619ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard, 14620 colors#8, pairs#64, 14621 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 14622 use=ncr260vt300wan, 14623# The Intecolor emulation of the NCR 2900/260C color terminal is basically a 14624# DEC vt200/300 with color capabilities added. 14625ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard, 14626 colors#8, pairs#64, 14627 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 14628 use=ncr260vt300pp, 14629# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a 14630# DEC vt200/300 with color capabilities added. 14631ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode, 14632 colors#8, pairs#64, 14633 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 14634 use=ncr260vt300wpp, 14635# This definition for ViewPoint supports several attributes. This means 14636# that it has magic cookies (extra spaces where the attributes begin). 14637# Some applications do not function well with magic cookies. The System 14638# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. 14639# If supporting various attributes is not vital, 'xmc#1' and the extra 14640# attributes can be removed. 14641# Mapping to ASCII character set ('acsc' capability) can also be 14642# restored if needed. 14643ncr260vppp|NCR 2900_260 viewpoint, 14644 am, bw, hs, km, mc5i, mir, msgr, xon, 14645 cols#80, lines#24, nlab#32, xmc#1, 14646 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, 14647 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5, 14648 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>, 14649 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>, 14650 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>, 14651 el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1, 14652 il1=\EM$<2>, ind=\n$<2>, invis=\EG1, 14653 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, 14654 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ, 14655 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F, 14656 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r, 14657 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r, 14658 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r, 14659 kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r, 14660 kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, 14661 kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, 14662 kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, 14663 kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, 14664 kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R, 14665 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>, 14666 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003, 14667 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 14668 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, 14669 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq, 14670 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF, 14671ncr260vpwpp|NCR 2900_260 viewpoint wide mode, 14672 cols#132, 14673 cup=\Ea%i%p1%dR%p2%dC$<30>, 14674 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, 14675 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, 14676 use=ncr260vppp, 14677ncr260vt100an|NCR 2900_260 vt100 with ansi kybd, 14678 am, hs, mir, msgr, xenl, xon, 14679 cols#80, lines#24, nlab#32, 14680 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 14681 blink=\E[5m, bold=\E[1m, civis=\E[?25l, 14682 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>, 14683 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>, 14684 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, 14685 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, 14686 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, 14687 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, 14688 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~, 14689 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>, 14690 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I, 14691 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, 14692 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>, 14693 invis=\E[8m, 14694 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14695 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 14696 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, 14697 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>, 14698 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l, 14699 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m, 14700 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14701 sc=\E7, 14702 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>, 14703 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h, 14704 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g, 14705 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad, 14706ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd, 14707 cols#132, 14708 cup=\E[%i%p1%d;%p2%dH$<30>, 14709 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14710 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14711 use=ncr260vt100an, 14712ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd, 14713 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14714 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, 14715 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, 14716 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~, 14717 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, 14718 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14719 smkx=\E=, use=ncr260vt100an, 14720ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd, 14721 cols#132, 14722 cup=\E[%i%p1%d;%p2%dH$<30>, 14723 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14724 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14725 use=ncr260vt100pp, 14726ncr260vt200an|NCR 2900_260 vt200 with ansi kybd, 14727 am, hs, mir, msgr, xenl, xon, 14728 cols#80, lines#24, nlab#32, 14729 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 14730 blink=\E[5m, bold=\E[1m, civis=\E[?25l, 14731 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>, 14732 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>, 14733 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, 14734 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, 14735 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, 14736 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, 14737 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~, 14738 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, 14739 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, 14740 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>, 14741 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m, 14742 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14743 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 14744 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~, 14745 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 14746 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 14747 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, 14748 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, 14749 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~, 14750 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~, 14751 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, 14752 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, 14753 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, 14754 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, 14755 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l, 14756 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 14757 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14758 sc=\E7, 14759 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>, 14760 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h, 14761 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 14762 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, 14763 use=vt220+keypad, 14764ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd, 14765 cols#132, 14766 cup=\E[%i%p1%d;%p2%dH$<30>, 14767 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, 14768 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, 14769 use=ncr260vt200an, 14770ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd, 14771 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, 14772 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, 14773 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 14774 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=, 14775 use=ncr260vt200an, 14776ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd, 14777 cols#132, 14778 cup=\E[%i%p1%d;%p2%dH$<30>, 14779 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14780 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14781 use=ncr260vt200pp, 14782ncr260vt300an|NCR 2900_260 vt300 with ansi kybd, 14783 am, hs, mir, msgr, xenl, xon, 14784 cols#80, lines#24, nlab#32, 14785 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 14786 blink=\E[5m, bold=\E[1m, civis=\E[?25l, 14787 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>, 14788 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>, 14789 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, 14790 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, 14791 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, 14792 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, 14793 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~, 14794 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, 14795 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, 14796 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>, 14797 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m, 14798 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14799 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 14800 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~, 14801 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 14802 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 14803 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~, 14804 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~, 14805 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, 14806 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~, 14807 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 14808 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 14809 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, 14810 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>, 14811 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 14812 rmul=\E[24m, 14813 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14814 sc=\E7, 14815 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>, 14816 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h, 14817 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 14818 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, 14819 use=vt220+keypad, 14820ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd, 14821 cols#132, 14822 cup=\E[%i%p1%d;%p2%dH$<30>, 14823 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>, 14824 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>, 14825 use=ncr260vt300an, 14826ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd, 14827 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, 14828 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, 14829 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 14830 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=, 14831 use=ncr260vt300an, 14832NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd, 14833 cols#132, 14834 cup=\E[%i%p1%d;%p2%dH$<30>, 14835 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14836 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 14837 use=ncr260vt300pp, 14838# This terminfo file contains color capabilities for the Wyse325 emulation of 14839# the NCR 2900/260C color terminal. Because of the structure of the command 14840# (escape sequence) used to set color attributes, one of the fore/background 14841# colors must be preset to a given value. I have set the background color to 14842# black. The user can change this setup by altering the last section of the 14843# 'setf' definition. The escape sequence to set color attributes is 14844# ESC d y <foreground_color> <background_color> 1 14845# In addition, the background color can be changed through the desk accessories. 14846# The capablitiy 'op' sets colors to green on black (default combination). 14847# 14848# NOTE: The NCR Unix System Administrator's Shell will not function properly 14849# if the 'pairs' capability is defined. Un-Comment the 'pairs' 14850# capability and recompile if you wish to have it included. 14851# 14852ncr260wy325pp|NCR 2900_260 wyse 325, 14853 am, bw, hs, km, mc5i, mir, msgr, xon, 14854 colors#16, cols#80, lines#24, ncv#33, nlab#32, 14855 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, 14856 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M, 14857 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 14858 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>, 14859 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c, 14860 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I, 14861 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1, 14862 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 14863 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ, 14864 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, 14865 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET, 14866 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, 14867 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, 14868 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, 14869 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, 14870 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r, 14871 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 14872 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, 14873 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R, 14874 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>, 14875 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0, 14876 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 14877 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 14878 setb=\s, 14879 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>, 14880 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/, 14881 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0, 14882 tsl=\EF, 14883ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode, 14884 cols#132, 14885 cup=\Ea%i%p1%dR%p2%dC$<30>, 14886 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 14887 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 14888 use=ncr260wy325pp, 14889# This definition for Wyse 350 supports several attributes. This means 14890# that it has magic cookies (extra spaces where the attributes begin). 14891# Some applications do not function well with magic cookies. The System 14892# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. 14893# If supporting various attributes is not vital, 'xmc#1' and the extra 14894# attributes can be removed. 14895# Mapping to ASCII character set ('acsc' capability) can also be 14896# restored if needed. 14897# In addition, color capabilities have been added to this file. The drawback, 14898# however, is that the background color has to be black. The foreground colors 14899# are numbered 0 through 15. 14900# 14901# NOTE: The NCR Unix System Administrator's Shell does not function properly 14902# with the 'pairs' capability defined as below. If you wish to 14903# have it included, Un-comment it and recompile (using 'tic'). 14904# 14905ncr260wy350pp|NCR 2900_260 wyse 350, 14906 am, bw, hs, km, mc5i, mir, msgr, xon, 14907 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1, 14908 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, 14909 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, 14910 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 14911 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>, 14912 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c, 14913 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I, 14914 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1, 14915 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 14916 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H, 14917 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, 14918 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, 14919 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 14920 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, 14921 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, 14922 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, 14923 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, 14924 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, 14925 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, 14926 mc0=\EP$<10>, mc4=^T, mc5=^R, 14927 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>, 14928 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0, 14929 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 14930 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 14931 setb=\s, 14932 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>, 14933 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/, 14934 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0, 14935 tsl=\EF, 14936ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode, 14937 cols#132, 14938 cup=\Ea%i%p1%dR%p2%dC$<30>, 14939 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, 14940 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, 14941 use=ncr260wy350pp, 14942# This definition for Wyse 50+ supports several attributes. This means 14943# that it has magic cookies (extra spaces where the attributes begin). 14944# Some applications do not function well with magic cookies. The System 14945# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. 14946# If supporting various attributes is not vital, 'xmc#1' and the extra 14947# attributes can be removed. 14948# Mapping to ASCII character set ('acsc' capability) can also be 14949# restored if needed. 14950# (ncr260wy50+pp: originally contained commented-out 14951# <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr) 14952ncr260wy50+pp|NCR 2900_260 wyse 50+, 14953 am, bw, hs, km, mc5i, mir, msgr, xon, 14954 cols#80, lines#24, nlab#32, xmc#1, 14955 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, 14956 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, 14957 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 14958 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>, 14959 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c, 14960 ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>, 14961 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>, 14962 invis=\EG1, 14963 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 14964 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H, 14965 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, 14966 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, 14967 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 14968 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, 14969 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, 14970 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, 14971 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, 14972 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, 14973 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, 14974 mc0=\EP$<10>, mc4=^T, mc5=^R, 14975 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>, 14976 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed., 14977 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 14978 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 14979 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq, 14980 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF, 14981ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode, 14982 cols#132, 14983 cup=\Ea%i%p1%dR%p2%dC$<30>, 14984 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, 14985 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, 14986 use=ncr260wy50+pp, 14987ncr260wy60pp|NCR 2900_260 wyse 60, 14988 am, bw, hs, km, mc5i, mir, msgr, xon, 14989 cols#80, lines#24, nlab#32, 14990 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, 14991 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, 14992 cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 14993 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>, 14994 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c, 14995 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>, 14996 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>, 14997 invis=\EG1, 14998 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 14999 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ, 15000 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, 15001 kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 15002 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 15003 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 15004 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, 15005 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, 15006 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, 15007 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, 15008 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 15009 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R, 15010 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>, 15011 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed., 15012 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 15013 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 15014 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/, 15015 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>, 15016 tsl=\EF, 15017ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode, 15018 cols#132, 15019 cup=\Ea%i%p1%dR%p2%dC$<30>, 15020 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 15021 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 15022 use=ncr260wy60pp, 15023ncr160vppp|NCR 2900_160 viewpoint, 15024 use=ncr260vppp, 15025ncr160vpwpp|NCR 2900_160 viewpoint wide mode, 15026 use=ncr260vpwpp, 15027ncr160vt100an|NCR 2900_160 vt100 with ansi kybd, 15028 use=ncr260vt100an, 15029ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd, 15030 use=ncr260vt100pp, 15031ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd, 15032 use=ncr260vt100wan, 15033ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd, 15034 use=ncr260vt100wpp, 15035ncr160vt200an|NCR 2900_160 vt200 with ansi kybd, 15036 use=ncr260vt200an, 15037ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd, 15038 use=ncr260vt200pp, 15039ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd, 15040 use=ncr260vt200wan, 15041ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd, 15042 use=ncr260vt200wpp, 15043ncr160vt300an|NCR 2900_160 vt300 with ansi kybd, 15044 use=ncr260vt300an, 15045ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd, 15046 use=ncr260vt300pp, 15047ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd, 15048 use=ncr260vt300wan, 15049ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd, 15050 use=ncr260vt300wpp, 15051ncr160wy50+pp|NCR 2900_160 wyse 50+, 15052 use=ncr260wy50+pp, 15053ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode, 15054 use=ncr260wy50+wpp, 15055ncr160wy60pp|NCR 2900_160 wyse 60, 15056 use=ncr260wy60pp, 15057ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode, 15058 use=ncr260wy60wpp, 15059ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal, 15060 am, hs, mc5i, mir, msgr, xon, 15061 cols#80, it#8, lines#24, nlab#32, 15062 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~, 15063 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>, 15064 clear=\E[2J\E[1;1H$<300>, cr=^M, 15065 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>, 15066 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>, 15067 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>, 15068 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>, 15069 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>, 15070 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>, 15071 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>, 15072 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>, 15073 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>, 15074 ind=\ED, 15075 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>, 15076 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D, 15077 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP, 15078 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE, 15079 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>, 15080 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>, 15081 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>, 15082 sc=\E7, 15083 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>, 15084 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>, 15085 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>, 15086 tsl=\E[>+1$<70>, 15087ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal, 15088 cols#132, 15089 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>, 15090 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>, 15091 use=ncrvt100an, 15092# 15093# Vendor-supplied NCR termcaps end here 15094 15095# NCR7900 DIP switches: 15096# 15097# Switch A: 15098# 1-4 - Baud Rate 15099# 5 - Parity (Odd/Even) 15100# 6 - Don't Send or Do Send Spaces 15101# 7 - Parity Enable 15102# 8 - Stop Bits (One/Two) 15103# 15104# Switch B: 15105# 1 - Upper/Lower Shift 15106# 2 - Typewriter Shift 15107# 3 - Half Duplex / Full Duplex 15108# 4 - Light/Dark Background 15109# 5-6 - Carriage Return Without / With Line Feed 15110# 7 - Extended Mode 15111# 8 - Suppress Keyboard Display 15112# 15113# Switch C: 15114# 1 - End of line entry disabled/enabled 15115# 2 - Conversational mode / (Local?) Mode 15116# 3 - Control characters displayed / not displayed 15117# 4 - (2-wire?) / 4-wire communications 15118# 5 - RTS on and off for each character 15119# 6 - (50Hz?) / 60 Hz 15120# 7 - Exit after level zero diagnostics 15121# 8 - RS-232 interface 15122# 15123# Switch D: 15124# 1 - Reverse Channel (yes / no) 15125# 2 - Manual answer (no / yes) 15126# 3-4 - Cursor appearance 15127# 5 - Communication Rate 15128# 6 - Enable / Disable EXT turnoff 15129# 7 - Enable / Disable CR turnoff 15130# 8 - Enable / Disable backspace 15131# 15132# Since each attribute parameter is 0 or 1, we shift each attribute (standout, 15133# reverse, blink, dim, and underline) the appropriate number of bits (by 15134# multiplying the 0 or 1 by a correct factor to shift) so the bias character, 15135# '@' is (effectively) "or"ed with each attribute to generate the proper third 15136# character in the <ESC>0 sequence. The <sgr> string implements the following 15137# equation: 15138# 15139# ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) => 15140# ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17)) 15141# 15142# Where: P1 <==> Standout attribute parameter 15143# P2 <==> Underline attribute parameter 15144# P3 <==> Reverse attribute parameter 15145# P4 <==> Blink attribute parameter 15146# P5 <==> Dim attribute parameter 15147# From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO. 15148ncr7900i|ncr7900|ncr 7900 model 1, 15149 am, bw, ul, 15150 cols#80, lines#24, xmc#1, 15151 bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 15152 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J, 15153 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F, 15154 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@, 15155 rmul=\E0@, 15156 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c, 15157 sgr0=\E0@, smso=\E0Q, smul=\E0`, 15158ncr7900iv|ncr 7900 model 4, 15159 am, bw, eslok, hs, 15160 cols#80, lines#24, 15161 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, 15162 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1, 15163 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H, 15164 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET, 15165 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, 15166 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J, 15167 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo, 15168# Warning: This terminal will lock out the keyboard when it receives a CTRL-D. 15169# The user can enter a CTRL-B to get out of this locked state. 15170# In <hpa>, we want to output the character given by the formula: 15171# ((col / 10) * 16) + (col % 10) where "col" is "p1" 15172ncr7901|ncr 7901 model, 15173 am, bw, ul, 15174 cols#80, lines#24, 15175 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M, 15176 cub1=^H, cud1=^J, cuf1=^F, 15177 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A, 15178 ed=\Ek, el=\EK, 15179 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J, 15180 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, 15181 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O, 15182 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016, 15183 sgr0=^O, smso=\E0Q\016, smul=\E0`\016, 15184 vpa=\013%p1%{64}%+%c, 15185 15186#### Perkin-Elmer (Owl) 15187# 15188# These are official terminfo entries from within Perkin-Elmer. 15189# 15190 15191bantam|pe550|pe6100|perkin elmer 550, 15192 OTbs, 15193 cols#80, lines#24, 15194 bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 15195 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 15196 el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA, 15197fox|pe1100|perkin elmer 1100, 15198 OTbs, am, 15199 cols#80, lines#24, 15200 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J, 15201 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 15202 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003, 15203 home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3, 15204owl|pe1200|perkin elmer 1200, 15205 OTbs, am, in, 15206 cols#80, lines#24, 15207 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J, 15208 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 15209 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>, 15210 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH, 15211 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>, 15212 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD, 15213 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA, 15214 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3, 15215pe1251|pe6300|pe6312|perkin elmer 1251, 15216 am, 15217 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1, 15218 bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, 15219 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 15220 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J, 15221 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE, 15222 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3, 15223# (pe7000m: this had 15224# rmul=\E!\0, smul=\E!\040, 15225# which is probably wrong, it collides with kf0 15226pe7000m|perkin elmer 7000 series monochrome monitor, 15227 am, 15228 cols#80, lines#24, 15229 bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB, 15230 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 15231 ed=\EJ, el=\EI, home=\EH, ind=^J, 15232 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V, 15233 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A, 15234 kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E, 15235 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S, 15236 ll=\ES7\s, ri=\ER, 15237pe7000c|perkin elmer 7000 series colour monitor, 15238 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0, 15239 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m, 15240 15241#### Sperry Univac 15242# 15243# Sperry Univac has merged with Burroughs to form Unisys. 15244# 15245 15246# This entry is for the Sperry UTS30 terminal running the TTY 15247# utility under control of CP/M Plus 1R1. The functionality 15248# provided is comparable to the DEC vt100. 15249# (uts30: I added <rmam>/<smam> based on the init string -- esr) 15250uts30|sperry uts30 with cp/m@1R1, 15251 am, bw, hs, 15252 cols#80, lines#24, wsl#40, 15253 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 15254 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L, 15255 cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c, 15256 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB, 15257 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH, 15258 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM, 15259 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H, 15260 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN, 15261 ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H, 15262 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H, 15263 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI, 15264 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m, 15265 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 15266 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m, 15267 smul=\E[4m, tsl=\E], uc=\EPB, 15268 15269#### Tandem 15270# 15271# Tandem builds these things for use with its line of fault-tolerant 15272# transaction-processing computers. They aren't generally available 15273# on the merchant market, and so are fairly uncommon. 15274# 15275 15276tandem6510|adm3a repackaged by Tandem, 15277 use=adm3a, 15278 15279# A funny series of terminal that TANDEM uses. The actual model numbers 15280# have a fourth digit after 653 that designates minor variants. These are 15281# natively block-mode and rather ugly, but they have a character mode which 15282# this doubtless(?) exploits. There is a 6520 that is slightly dumber. 15283# (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also, 15284# removed <if=/usr/share/tabset/tandem653>, no such file -- esr) 15285tandem653|t653x|Tandem 653x multipage terminal, 15286 OTbs, am, da, db, hs, 15287 cols#80, lines#24, wsl#64, xmc#1, 15288 clear=\EI, cub1=^H, cud1=^J, cuf1=\EC, 15289 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r, 15290 ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s, 15291 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo, 15292 15293#### Tandy/Radio Shack 15294# 15295# Tandy has a line of VDTs distinct from its microcomputers. 15296# 15297 15298dmterm|deskmate terminal, 15299 am, bw, 15300 cols#80, lines#24, 15301 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H, 15302 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 15303 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I, 15304 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB, 15305 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4, 15306 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0, 15307 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, 15308 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@, 15309 use=adm+sgr, 15310dt100|dt-100|Tandy DT-100 terminal, 15311 xon, 15312 cols#80, lines#24, xmc#1, 15313 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l, 15314 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 15315 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 15316 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, 15317 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, 15318 il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D, 15319 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i, 15320 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~, 15321 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H, 15322 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5, 15323 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, 15324 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m, 15325dt100w|dt-100w|Tandy DT-100 terminal (wide mode), 15326 cols#132, use=dt100, 15327dt110|Tandy DT-110 emulating ansi, 15328 xon, 15329 cols#80, lines#24, 15330 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l, 15331 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 15332 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[0B, cuf1=\E[C, 15333 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[0A, dch1=\E[0P, 15334 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H, 15335 ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B, 15336 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K, 15337 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~, 15338 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~, 15339 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1, 15340 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9, 15341 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 15342 smacs=^N, smso=\E[7m, smul=\E[4m, 15343pt210|TRS-80 PT-210 printing terminal, 15344 hc, os, 15345 cols#80, 15346 bel=^G, cr=^M, cud1=^J, ind=^J, 15347 15348#### Tektronix (tek) 15349# 15350# Tektronix tubes are graphics terminals. Most of them use modified 15351# oscilloscope technology incorporating a long-persistence green phosphor, 15352# and support vector graphics on a main screen with an attached "dialogue 15353# area" for interactive text. 15354# 15355 15356tek|tek4012|tektronix 4012, 15357 OTbs, os, 15358 cols#75, lines#35, 15359 bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J, 15360 ff=\014$<1000>, is2=\E^O, 15361# (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 15362tek4013|tektronix 4013, 15363 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012, 15364tek4014|tektronix 4014, 15365 cols#81, lines#38, 15366 is2=\E\017\E9, use=tek4012, 15367# (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 15368tek4015|tektronix 4015, 15369 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014, 15370tek4014-sm|tektronix 4014 in small font, 15371 cols#121, lines#58, 15372 is2=\E\017\E\:, use=tek4014, 15373# (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 15374tek4015-sm|tektronix 4015 in small font, 15375 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm, 15376# Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay> 15377# 15378# You need to have "stty nl2" in effect. Some versions of tset(1) know 15379# how to set it for you. 15380# 15381# It's got the Magic Cookie problem around stand-out mode. If you can't 15382# live with Magic Cookie, remove the :so: and :se: fields and do without 15383# reverse video. If you like reverse video stand-out mode but don't want 15384# it to flash, change the letter 'H' to 'P' in the :so: field. 15385tek4023|tektronix 4023, 15386 OTbs, am, 15387 OTdN#4, cols#80, lines#24, vt#4, xmc#1, 15388 OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J, 15389 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, 15390 rmso=^_@, smso=^_P, 15391# It is recommended that you run the 4025 at 4800 baud or less; 15392# various bugs in the terminal appear at 9600. It wedges at the 15393# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed 15394# on keyboard don't work. You have to hit BREAK twice to get 15395# one break at any speed - this is a documented feature. 15396# Can't use cursor motion because it's memory relative, and 15397# because it only works in the workspace, not the monitor. 15398# Same for home. Likewise, standout only works in the workspace. 15399# 15400# <el> was commented out since vi and rogue seem to work better 15401# simulating it with lots of spaces! 15402# 15403# <il1> and <il> had 145ms of padding, but that slowed down vi's ^U 15404# and didn't seem necessary. 15405# 15406tek4024|tek4025|tek4027|tektronix 4024/4025/4027, 15407 OTbs, am, da, db, 15408 cols#80, it#8, lines#34, lm#0, 15409 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M, 15410 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r, 15411 cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r, 15412 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r, 15413 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006, 15414 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010, 15415 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r, 15416 ind=^F^J, 15417 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r, 15418 rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r, 15419 smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r, 15420tek4025-17|tek 4025 17 line window, 15421 lines#17, use=tek4025, 15422tek4025-17-ws|tek 4025 17 line window in workspace, 15423 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r, 15424 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r, 15425 smso=\037att e\r, use=tek4025-17, 15426tek4025-ex|tek4027-ex|tek 4025/4027 w/!, 15427 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r, 15428 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025, 15429# Tektronix 4025a 15430# From: Doug Gwyn <gwyn@brl-smoke.ARPA> 15431# The following status modes are assumed for normal operation (replace the 15432# initial "!" by whatever the current command character is): 15433# !COM 29 # NOTE: changes command character to GS (^]) 15434# ^]DUP 15435# ^]ECH R 15436# ^]EOL 15437# ^]RSS T 15438# ^]SNO N 15439# ^]STO 9 17 25 33 41 49 57 65 73 15440# Other modes may be set according to communication requirements. 15441# If the command character is inadvertently changed, termcap can't restore it. 15442# Insert-character cannot be made to work on both top and bottom rows. 15443# Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas. 15444# There also seems to be a problem with vertical motion, perhaps involving 15445# delete/insert-line, following a typed carriage return. This terminal sucks. 15446# Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 15447# (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't 15448# work any more. -- esr) 15449tek4025a|Tektronix 4025A, 15450 OTbs, OTpt, am, bw, da, db, xon, 15451 cols#80, it#8, lines#34, 15452 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^], 15453 cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;, 15454 cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;, 15455 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;, 15456 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;, 15457 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I, 15458 il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;, 15459 rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;, 15460 tbc=\035sto;, 15461# From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981 15462# Here's the command file that I use to get rogue to work on the 4025. 15463# It should work with any program using the old curses (e.g. it better 15464# not try to scroll, or cursor addressing won't work. Also, you can't 15465# see the cursor.) 15466# (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh) 15467tek4025-cr|tek 4025 for curses and rogue, 15468 OTbs, am, 15469 cols#80, it#8, lines#33, 15470 clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;, 15471 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J, 15472 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r, 15473 rmcup=\037wor 0, smcup=\037wor 33h, 15474# next two lines commented out since curses only allows 128 chars, sigh. 15475# :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\ 15476# :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0: 15477tek4025ex|4025ex|4027ex|tek 4025 w/!, 15478 is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r, 15479 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025, 15480tek4105|tektronix 4105, 15481 OTbs, am, mir, msgr, ul, xenl, xt, 15482 cols#79, it#8, lines#29, 15483 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z, 15484 clear=\E[2J\E[H, cr=^M, cud1=\E[1B, cuf1=\E[1C, 15485 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P, 15486 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 15487 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m, 15488 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B, 15489 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T, 15490 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m, 15491 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m, 15492 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m, 15493 smul=\E[=5;<2m, tbc=\E[1g, 15494 15495# (tek4105-30: I added <rmam>/<smam> based on the init string -- esr) 15496tek4105-30|4015 emulating 30 line vt100, 15497 am, mir, msgr, xenl, xon, 15498 cols#80, it#8, lines#30, vt#3, 15499 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 15500 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 15501 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 15502 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 15503 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 15504 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 15505 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 15506 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, 15507 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8, 15508 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 15509 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, 15510 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 15511 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, 15512 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 15513 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 15514 use=vt100+fnkeys, 15515 15516# Tektronix 4105 from BRL 15517# The following setup modes are assumed for normal operation: 15518# CODE ansi CRLF no DABUFFER 141 15519# DAENABLE yes DALINES 30 DAMODE replace 15520# DAVISIBILITY yes ECHO no EDITMARGINS 1 30 15521# FLAGGING input INSERTREPLACE replace LFCR no 15522# ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B 15523# SELECTCHARSET G1 0 TABS -2 15524# Other setup modes may be set for operator convenience or communication 15525# requirements; I recommend 15526# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes 15527# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0 15528# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU> 15529# GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1 15530# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>" 15531# PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132 15532# XMTDELAY 0 15533# and factory color maps. After setting these modes, save them with NVSAVE. No 15534# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 15535# "IC" cannot be used in combination with "im" & "ei". 15536# "tek4105a" is just a guess: 15537tek4105a|Tektronix 4105, 15538 OTbs, OTpt, msgr, xon, 15539 OTkn#8, cols#80, it#8, lines#30, vt#3, 15540 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 15541 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J, 15542 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr, 15543 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 15544 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 15545 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1, 15546 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 15547 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 15548 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1, 15549 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 15550 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, 15551 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, 15552 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 15553 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1, 15554 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 15555 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>, 15556 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h, 15557 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 15558 15559# 15560# Tektronix 4106/4107/4109 from BRL 15561# The following setup modes are assumed for normal operation: 15562# CODE ansi COLUMNMODE 80 CRLF no 15563# DABUFFER 141 DAENABLE yes DALINES 32 15564# DAMODE replace DAVISIBILITY yes ECHO no 15565# EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace 15566# LFCR no LOCKKEYBOARD no ORIGINMODE relative 15567# PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0 15568# TABS -2 15569# Other setup modes may be set for operator convenience or communication 15570# requirements; I recommend 15571# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes 15572# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0 15573# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU> 15574# GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3 15575# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>" 15576# PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132 15577# XMTDELAY 0 15578# and factory color maps. After setting these modes, save them with NVSAVE. No 15579# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 15580# "IC" cannot be used in combination with "im" & "ei". 15581tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109, 15582 msgr, xon, 15583 cols#80, it#8, lines#32, vt#3, 15584 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 15585 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J, 15586 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr, 15587 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 15588 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 15589 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1, 15590 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 15591 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 15592 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1, 15593 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 15594 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, 15595 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, 15596 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 15597 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1, 15598 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 15599 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>, 15600 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h, 15601 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g, 15602 15603tek4107|tek4109|tektronix terminals 4107 4109, 15604 OTbs, am, mir, msgr, ul, xenl, xt, 15605 cols#79, it#8, lines#29, 15606 bel=^G, blink=\E%!1\E[5m$<2>\E%!0, 15607 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M, 15608 cub1=^H, cud1=^J, cuf1=\EC, 15609 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3, 15610 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J, 15611 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 15612 rev=\E%!1\E[7m$<2>\E%0, ri=\EI, 15613 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0, 15614 sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>\E%%!0, 15615 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0, 15616 smul=\E%!1\E[4m$<2>\E%!0, 15617# Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s; 15618# see the note attached to tek4207. 15619tek4207-s|Tektronix 4207 with sysline but no memory, 15620 eslok, hs, 15621 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8, 15622 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J, 15623 is2=\E7\E[?6l\E[2K\E[?6h\E8, 15624 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107, 15625 15626# The 4110 series may be a wonderful graphics series, but they make the 4025 15627# look good for screen editing. In the dialog area, you can't move the cursor 15628# off the bottom line. Out of the dialog area, ^K moves it up, but there 15629# is no way to scroll. 15630# 15631# Note that there is a floppy for free from Tek that makes the 15632# 4112 emulate the vt52 (use the vt52 termcap). There is also 15633# an expected enhancement that will use ANSI standard sequences. 15634# 15635# 4112 in non-dialog area pretending to scroll. It really wraps 15636# but vi is said to work (more or less) in this mode. 15637# 15638# 'vi' works reasonably well with this entry. 15639# 15640otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series, 15641 am, 15642 cols#80, lines#34, 15643 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J, 15644 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0, 15645# The 4112 with the ANSI compatibility enhancement 15646tek4112|tek4114|tektronix 4110 series, 15647 OTbs, am, db, 15648 cols#80, lines#34, 15649 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cuf1=\E[C, 15650 cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, dl1=\E[M, 15651 ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L, 15652 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8, 15653 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 15654tek4112-nd|4112 not in dialog area, 15655 OTns, 15656 cuu1=^K, use=tek4112, 15657tek4112-5|4112 in 5 line dialog area, 15658 lines#5, use=tek4112, 15659# (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake; 15660# removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3. 15661# Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were 15662# previously \0410 and \0411 sequences...I don't *think* they were supposed 15663# to be 4-digit octal -- esr) 15664tek4113|tektronix 4113 color graphics with 5 line dialog area, 15665 OTbs, am, da, eo, 15666 cols#80, lines#5, 15667 clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0, 15668 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0, 15669 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0, 15670tek4113-34|tektronix 4113 color graphics with 34 line dialog area, 15671 lines#34, 15672 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113, 15673# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not 15674# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up . 15675# :vb: needs enough delay to let you see the background color being toggled. 15676tek4113-nd|tektronix 4113 color graphics with no dialog area, 15677 OTbs, am, eo, 15678 cols#80, it#8, lines#34, 15679 clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K, 15680 cvvis=\ELZ\EKA0, 15681 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0, 15682 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @, 15683 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0, 15684# This entry is from Tek. Inc. (Brian Biehl) 15685# (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr) 15686otek4115|Tektronix 4115, 15687 OTbs, am, da, db, eo, 15688 cols#80, it#8, lines#34, 15689 cbt=\E[Z, clear=\E[H\E[2J, 15690 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B, 15691 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 15692 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J, 15693 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100, 15694 il1=\E[L, 15695 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m, 15696 kbs=^H, ri=\EM, rmam=\E[?7l, 15697 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l, 15698 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, 15699 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m, 15700 smul=\E[4m, 15701tek4115|newer tektronix 4115 entry with more ANSI capabilities, 15702 am, xon, 15703 cols#80, lines#34, 15704 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 15705 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 15706 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 15707 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM, 15708 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG, 15709 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 15710 il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D, 15711 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 15712 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l, 15713 rmso=\E[m, rmul=\E[m, 15714 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, 15715 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[2g, 15716 vpa=\E[%p1%{1}%+%dd, 15717# The tek4125 emulates a vt100 incorrectly - the scrolling region 15718# command is ignored. The following entry replaces <csr> with the needed 15719# <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125 15720# chokes on; and adds a lot of initialization for the tek dialog area. 15721# Note that this entry uses all 34 lines and sets the cursor color to green. 15722# Steve Jacobson 8/85 15723# (tek4125: there were two "\!"s in the is that I replaced with "\E!"; 15724# commented out, <smir>=\E1 because there's no <rmir> -- esr) 15725tek4125|tektronix 4125, 15726 lines#34, 15727 csr@, dl1=\E[1M, il1=\E[1L, 15728 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 15729 rc@, sc@, smkx=\E=, use=vt100, 15730 15731# From: <jcoker@ucbic> 15732# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO 15733# supplied another, less capable 4107 entry. So we'll use that for 4107 and 15734# note that if jcoker wasn't confused you may be able to use this one. 15735# I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr) 15736tek4207|Tektronix 4207 graphics terminal with memory, 15737 am, bw, mir, msgr, ul, xenl, 15738 cols#80, it#8, lines#32, 15739 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>, 15740 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 15741 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J, 15742 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>, 15743 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5, 15744 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J, 15745 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H, 15746 rev=\E[7m, ri=\E[T, 15747 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m, 15748 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m, 15749 smul=\E[4m, tbc=\E[1g, 15750 15751# From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985 15752# (tek4404: There was a "\!" in <smcup> that I replaced with "\E!". 15753# Tab had been given as \E2I,that must be the tab-set capability -- esr) 15754tek4404|tektronix 4404, 15755 OTbs, 15756 cols#80, it#8, lines#32, 15757 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, 15758 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 15759 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M, 15760 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L, 15761 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8, 15762 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l, 15763 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m, 15764 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h, 15765 smkx=\E[?1l, smso=\E[7m, smul=\E[4m, 15766# Some unknown person wrote: 15767# I added the is string - straight Unix has ESC ; in the login 15768# string which sets a ct8500 into monitor mode (aka 4025 snoopy 15769# mode). The is string here cleans up a few things (but not 15770# everything). 15771ct8500|tektronix ct8500, 15772 am, bw, da, db, 15773 cols#80, lines#25, 15774 bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J, 15775 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER, 15776 dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\, 15777 il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s, 15778 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!, 15779 15780# Tektronix 4205 terminal. 15781# 15782# am is not defined because the wrap around occurs not when the char. 15783# is placed in the 80'th column, but when we are attempting to type 15784# the 81'st character on the line. (esr: hmm, this is like the vt100 15785# version of xenl, perhaps am + xenl would work!) 15786# 15787# Bold, dim, and standout are simulated by colors and thus not allowed 15788# with colors. The tektronix color table is mapped into the RGB color 15789# table by setf/setb. All colors are reset to factory specifications by oc. 15790# The <initc> cap uses RGB notation to define colors. for arguments 1-3 the 15791# interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub- 15792# interval then maps into pre-defined value. 15793tek4205|tektronix 4205, 15794 ccc, mir, msgr, 15795 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63, 15796 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 15797 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z, 15798 clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D, 15799 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 15800 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 15801 dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX, 15802 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I, 15803 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED, 15804 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1, 15805 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H, 15806 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA, 15807 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER, 15808 kf7=\ES, 15809 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1, 15810 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=, 15811 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m, 15812 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;, 15813 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;, 15814 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N, 15815 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m, 15816 smul=\E[4m, tbc=\E[1g, 15817 15818#### Teletype (tty) 15819# 15820# These are the hardcopy Teletypes from before AT&T bought the company, 15821# clattering electromechanical dinosaurs in Bakelite cases that printed on 15822# pulpy yellow roll paper. If you remember these you go back a ways. 15823# Teletype-branded VDTs are listed in the AT&T section. 15824# 15825# The earliest UNIXes were designed to use these clunkers; nroff and a few 15826# other programs still default to emitting codes for the Model 37. 15827# 15828 15829tty33|tty35|model 33 or 35 teletype, 15830 hc, os, xon, 15831 cols#72, 15832 bel=^G, cr=^M, cud1=^J, ind=^J, 15833tty37|model 37 teletype, 15834 OTbs, hc, os, xon, 15835 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8, 15836 ind=^J, 15837 15838# There are known to be at least three flavors of the tty40, all seem more 15839# like IBM half duplex forms fillers than ASCII terminals. They have lots of 15840# awful braindamage, such as printing a visible newline indicator after each 15841# newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is 15842# braindamaged but has hope and is described here. The 40-4 is a 3270 15843# lookalike and beyond hope. The terminal has visible bell but I don't know 15844# it - it's null here to prevent it from showing the BL character. 15845# There is an \EG in <nl> because of a bug in old vi (if stty says you have 15846# a "newline" style terminal (-crmode) vi figures all it needs is nl 15847# to get crlf, even if <cr> is not ^M.) 15848# (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr) 15849tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2, 15850 OTbs, xon, 15851 cols#80, lines#24, 15852 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB, 15853 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>, 15854 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1, 15855 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^], 15856 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4, 15857 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>, 15858tty43|model 43 teletype, 15859 OTbs, am, hc, os, xon, 15860 cols#132, 15861 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H, 15862 15863#### Tymshare 15864# 15865 15866# You can add <is2=\E<> to put this 40-column mode, though I can't 15867# for the life of me think why anyone would want to. 15868scanset|sc410|sc415|Tymshare Scan Set, 15869 am, bw, msgr, 15870 cols#80, lines#24, 15871 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, 15872 cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 15873 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED, 15874 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0, 15875 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N, 15876 15877#### Volker-Craig (vc) 15878# 15879# If you saw a Byte Magazine cover with a terminal on it during the early 15880# 1980s, it was probably one of these. Carl Helmers liked them because 15881# they could crank 19.2 and were cheap (that is, he liked them until he tried 15882# to program one...) 15883# 15884 15885# Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time 15886# every other linefeed. 15887vc303|vc103|vc203|volker-craig 303, 15888 OTbs, OTns, am, 15889 cols#80, lines#24, 15890 bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I, 15891 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I, 15892 kcuu1=^N, ll=\017$<1>W, 15893vc303a|vc403a|volker-craig 303a, 15894 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>, 15895 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303, 15896# (vc404: removed obsolete ":ma=^Z^P^U :" -- esr) 15897vc404|volker-craig 404, 15898 OTbs, am, 15899 cols#80, lines#24, 15900 bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 15901 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, 15902 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J, 15903 kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, 15904vc404-s|volker-craig 404 w/standout mode, 15905 cud1=^J, rmso=^O, smso=^N, use=vc404, 15906# From: <wolfgang@cs.sfu.ca> 15907# (vc414: merged in cup/dl1/home from an old vc414h-noxon) 15908vc414|vc414h|Volker-Craig 414H in sane escape mode., 15909 OTbs, am, 15910 cols#80, lines#24, 15911 clear=\E\034$<40>, cud1=\E^K, cuf1=^P, 15912 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3, 15913 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R, 15914 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P, 15915 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE, 15916 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2, 15917 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8, 15918 rmso=\E^_, smso=\E^Y, 15919vc415|volker-craig 415, 15920 clear=^L, use=vc404, 15921 15922######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS 15923# 15924 15925#### IBM PC and clones 15926# 15927 15928# The pcplot IBM-PC terminal emulation program is really messed up. It is 15929# supposed to emulate a vt-100, but emulates the wraparound bug incorrectly, 15930# doesn't support scrolling regions, ignores add line commands, and ignores 15931# delete line commands. Consequently, the resulting behavior looks like a 15932# crude adm3a-type terminal. 15933# Steve Jacobson 8/85 15934pcplot|pc-plot terminal emulation program, 15935 xenl@, 15936 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100, 15937# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA> 15938# I've found that my KayPro II, running MDM730, continues to emulate an 15939# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX 15940# system the following termcap entry works well: 15941# I have noticed a couple of minor glitches, but nothing I can't work 15942# around. (I added two capabilities from the BRL entry -- esr) 15943kaypro|kaypro2|kaypro II, 15944 OTbs, am, 15945 cols#80, lines#24, 15946 bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L, 15947 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W, 15948 el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K, 15949 15950# From IBM, Thu May 5 19:35:27 1983 15951# (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr) 15952ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS), 15953 OTbs, am, 15954 cols#80, lines#24, 15955 bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\, 15956 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_, 15957 15958ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX, 15959 OTbs, am, bw, eo, hs, km, msgr, ul, 15960 cols#80, it#8, lines#24, 15961 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 15962 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M, 15963 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 15964 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 15965 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 15966 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B, 15967 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H, 15968 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 15969 kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, 15970 kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, 15971 kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V, 15972 ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A, 15973 rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m, 15974 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, 15975 sgr0=\E[m, smso=\E[7m, smul=\E[4m, 15976 15977#### Apple II 15978# 15979# Apple II firmware console first, then various 80-column cards and 15980# terminal emulators. For two cents I'd toss all these in the UFO file 15981# along with the 40-column apple entries. 15982# 15983 15984# From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL 15985# 'it#8' tells UNIX that you have tabs every 8 columns. This is a 15986# function of TIC, not the firmware. 15987# The clear key on a IIgs will do something like clear-screen, 15988# depending on what you're in. 15989appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface, 15990 OTbs, am, bw, eo, msgr, 15991 cols#80, it#8, lines#24, 15992 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\, 15993 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 15994 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J, 15995 kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N, 15996 smso=^O, 15997# Apple //e with 80-column card, entry from BRL 15998# The modem interface is permitted to discard LF (maybe DC1), otherwise 15999# passing characters to the 80-column firmware via COUT (PR#3 assumed). 16000# Auto-wrap does not work right due to newline scrolling delay, which also 16001# requires that you set "stty cr2". 16002# Note: Cursor addressing is only available via the Pascal V1.1 entry, 16003# not via the BASIC PR#3 hook. All this nonsense can be avoided only by 16004# using a terminal emulation program instead of the built-in firmware. 16005apple2e|Apple //e, 16006 bw, msgr, 16007 cols#80, lines#24, 16008 bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_, 16009 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W, 16010 is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K, 16011 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N, 16012 smso=^O, 16013# mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro 16014# 4.20, with incoming and outgoing terminals both on 0, emulation On. 16015apple2e-p|Apple //e via Pascal, 16016 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H, 16017 kcud1=^J, use=apple2e, 16018# (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL 16019# Enable DC3/DC1 flow control with "stty ixon -ixany". 16020apple-ae|ASCII Express, 16021 OTbs, am, bw, msgr, nxon, xon, 16022 cols#80, it#8, lines#24, 16023 bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 16024 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 16025 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J, 16026 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N, 16027 smso=^O, 16028appleII|apple ii plus, 16029 OTbs, am, 16030 cols#80, it#8, lines#24, 16031 clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\, 16032 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6, 16033 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I, 16034 is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N, 16035 smso=^O, 16036# Originally by Gary Ford 21NOV83 16037# From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985 16038apple-80|apple II with smarterm 80 col, 16039 OTbs, am, bw, 16040 cols#80, lines#24, 16041 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J, 16042 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, 16043 ed=\013$<10*/>, el=\035$<10/>, home=^Y, 16044apple-soroc|apple emulating soroc 120, 16045 am, 16046 cols#80, lines#24, 16047 bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 16048 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET, 16049 home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 16050# From Peter Harrison, Computer Graphics Lab, San Francisco 16051# ucbvax!ucsfmis!harrison .....uucp 16052# ucbvax!ucsfmis!harrison@BERKELEY .......ARPA 16053# "These two work. If you don't have the inverse video chip for the 16054# Apple with videx then remove the :so: and :se: fields." 16055# (apple-videx: this used to be called DaleApple -- esr) 16056apple-videx|Apple with videx videoterm 80 column board with inverse video, 16057 OTbs, am, xenl, 16058 cols#80, it#8, lines#24, 16059 clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\, 16060 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 16061 home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y, 16062 rmso=^Z2, sgr0=^Z2, smso=^Z3, 16063# My system [for reference] : Apple ][+, 64K, Ultraterm display card, 16064# Apple Cat ][ 212 modem, + more all 16065# controlled by ASCII Express: Pro. 16066# From Dave Shaver <isucs1!shaver> 16067apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell, 16068 OTbs, am, eo, xt, 16069 cols#80, lines#24, 16070 acsc=, clear=^L, cuf1=^\, 16071 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 16072 flash=^W35^W06, home=^Y, 16073 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n, 16074 rmso=^N, smso=^O, 16075apple-uterm|Ultraterm for Apple micros, 16076 OTbs, am, eo, xt, 16077 cols#80, lines#24, 16078 acsc=, clear=^L, cuf1=^\, 16079 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 16080 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O, 16081# from trwrba!bwong (Bradley W. Wong): 16082# 16083# This entry assumes that you are using an apple with the UCSD Pascal 16084# language card. SYSTEM.MISCINFO is assumed to be the same as that 16085# supplied with the standard apple except that screenwidth should be set 16086# using SETUP to 80 columns. Note that the right arrow in not mapped in 16087# this termcap entry. This is because that key, on the Apple, transmits 16088# a ^U and would thus preempt the more useful "up" function of vi. 16089# 16090# HMH 2/23/81 16091apple80p|80-column apple with Pascal card, 16092 am, bw, 16093 cols#80, lines#24, 16094 clear=^Y^L, cuf1=^\\:, 16095 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 16096 home=^Y, kcub1=^H, 16097# 16098# Apple II+ equipped with Videx 80 column card 16099# 16100# Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL; 16101# manually converted by D A Gwyn 16102# 16103# DO NOT use any terminal emulation with this data base, it works directly 16104# with the Videx card. This has been tested with vi 1200 baud and works fine. 16105# 16106# This works great for vi, except I've noticed in pre-R2, ^U will scroll back 16107# 1 screen, while in R2 ^U doesn't. 16108# For inverse alternate character set add: 16109# <smacs>=^O:<rmacs>=^N: 16110# (apple-v: added it#8 -- esr) 16111apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520), 16112 am, xenl, 16113 cols#80, it#8, lines#24, 16114 bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H, 16115 cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, 16116 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>, 16117 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_, 16118 khome=^Y, rmso=^Z2, smso=^Z3, 16119apple-videx3|vapple|Apple II with 80 col card, 16120 OTbs, am, 16121 cols#80, lines#24, 16122 clear=\Ev, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 16123 cuu1=\EA, el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 16124 kcuu1=\EA, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, 16125 kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH, 16126#From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL 16127aepro|Apple II+ running ASCII Express Pro--vt52, 16128 OTbs, 16129 cols#80, lines#24, 16130 clear=\014$<300/>, cuf1=\EC, 16131 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 16132 el=\EK, home=\EH, 16133# UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory 16134apple-vm80|ap-vm80|apple with viewmax-80, 16135 OTbs, 16136 cols#80, lines#24, 16137 clear=\014$<300/>, cuf1=^\\:, 16138 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_, 16139 ed=\013$<300/>, el=^], home=\031$<200/>, 16140 16141#### Apple Lisa & Macintosh 16142# 16143 16144# (lisa: changed <cvvis> to <cnorm> -- esr) 16145lisa|apple lisa console display (black on white), 16146 OTbs, am, eo, msgr, 16147 cols#88, it#8, lines#32, 16148 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L, 16149 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C, 16150 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 16151 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, 16152 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B, 16153 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, 16154 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m, 16155liswb|apple lisa console display (white on black), 16156 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m, 16157 smso=\E[m, smul=\E[4m, use=lisa, 16158 16159# lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL; 16160# <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA> 16161# 16162# These entries assume that the 'Auto Wraparound' is enabled. 16163# Xon-Xoff flow control should also be enabled. 16164# 16165# The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab 16166# settings are in non-volatile memory and don't need to be reset upon login. 16167# Also setting the number of columns glitches the screen annoyingly. 16168# You can type "reset" to get them set. 16169# 16170lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation, 16171 OTbs, OTpt, am, xenl, xon, 16172 OTkn#4, cols#80, it#8, lines#24, vt#3, 16173 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 16174 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 16175 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 16176 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J, 16177 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, 16178 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ, 16179 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8, 16180 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 16181 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r, 16182 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 16183 tbc=\E[3g, 16184# Lisaterm in 132 column ("wide") mode. 16185lisaterm-w|Apple Lisa with Lisaterm in 132 column mode, 16186 cols#132, 16187 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm, 16188# Although MacTerminal has insert/delete line, it is commented out here 16189# since it is much faster and cleaner to use the "lock scrolling region" 16190# method of inserting and deleting lines due to the MacTerminal implementation. 16191# Also, the "Insert/delete ch" strings have an extra character appended to them 16192# due to a bug in MacTerminal V1.1. Blink is disabled since it is not 16193# supported by MacTerminal. 16194mac|macintosh|Macintosh with MacTerminal, 16195 xenl, 16196 OTdN#30, 16197 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa, 16198# Lisaterm in 132 column ("wide") mode. 16199mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode, 16200 cols#132, use=mac, 16201 16202# The AppKit Terminal.app descriptions all have names beginning with 16203# "nsterm". Note that the statusline (-s) versions use the window 16204# titlebar as a phony status line, and may produce warnings during 16205# compilation as a result ("tsl uses 0 parameters, expected 1".) Ignore 16206# these warnings, or even ignore these entries entirely. Apps which 16207# need to position the cursor or do other fancy stuff inside the status 16208# line won't work with these entries. They're primarily useful for 16209# programs like Pine which provide simple notifications in the status 16210# line. Please note that non-ASCII characters don't work right in the 16211# status line, since Terminal.app incorrectly interprets their Unicode 16212# codepoints as MacRoman codepoints. 16213# 16214# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to 16215# "nsterm" to comply with the name length and case conventions and 16216# limitations of various software packages [notably Solaris terminfo 16217# and UNIX.] A single Apple_Terminal alias is retained for 16218# backwards-compatbility. 16219# 16220# * Added function key support (F1-F4). These only work in Terminal.app 16221# version 51, hopefully the capabilities won't cause problems for people 16222# using version 41. 16223# 16224# * Added "full color" (-c) entries which support the 16-color mode in 16225# version 51. 16226# 16227# * By default, version 51 uses UTF-8 encoding with broken altcharset 16228# support, so "ASCII" (-7) entries without altcharset support were 16229# added. 16230 16231# nsterm - AppKit Terminal.app 16232# 16233# Apple's Mac OS X includes a Terminal.app derived from the old NeXT 16234# Terminal.app. It is a partial VT100 emulation with some xterm-like 16235# extensions. This terminfo was written to describe versions 41 16236# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X 16237# version 10.1) of Terminal.app. 16238# 16239# Terminal.app runs under the Mac OS X Quartz windowing system (and 16240# other AppKit-supported windowing systems.) On the Mac OS X machine I 16241# use, the executable for Terminal.app is: 16242# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal 16243# 16244# If you're looking for a description of the full-screen system 16245# console which runs under Apple's Darwin operating system on PowerPC 16246# platforms, see the "xnuppc" entry instead. 16247# 16248# There were no function keys in version 41. In version 51, there are 16249# four working function keys (F1, F2, F3 and F4.) The function keys 16250# are included in all of these entries. 16251# 16252# It does not support mouse pointer position reporting. Under some 16253# circumstances the cursor can be positioned using option-click; this 16254# works by comparing the cursor position and the selected position, 16255# and simulating enough cursor-key presses to move the cursor to the 16256# selected position. This technique fails in all but the simplest 16257# applications. 16258# 16259# It provides partial ANSI color support (background colors interacted 16260# badly with bold in version 41, though, as reflected in :ncv:.) The 16261# monochrome (-m) entries are useful if you've disabled color support 16262# or use a monochrome monitor. The full color (-c) entries are useful 16263# in version 51, which doesn't exhibit the background color bug. They 16264# also enable an xterm-compatible 16-color mode. 16265# 16266# The configurable titlebar is set using xterm-compatible sequences; 16267# it is used as a status bar in the statusline (-s) entries. Its width 16268# depends on font sizes and window sizes, but 50 characters seems to 16269# be the default for an 80x24 window. 16270# 16271# The MacRoman character encoding is used for some of the alternate 16272# characters in the "MacRoman" entries; the "ASCII" (-7) entries 16273# disable alternate character set support entirely, and the "VT100" 16274# (-acs) entries rely instead on Terminal.app's own buggy VT100 16275# graphics emulation, which seems to think the character encoding is 16276# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries 16277# are useful in Terminal.app version 51, which supports UTF-8 and 16278# other ASCII-compatible character encodings but does not correctly 16279# implement VT100 graphics; once VT100 graphics are correctly 16280# implemented in Terminal.app, the "VT100" (-acs) entries should be 16281# usable in any ASCII-compatible character encoding [except perhaps 16282# in UTF-8, where some experts argue for disallowing alternate 16283# characters entirely.] 16284# 16285# Terminal.app reports "vt100" as the terminal type, but exports 16286# several environment variables which may aid detection in a shell 16287# profile (i.e. .profile or .login): 16288# 16289# TERM=vt100 16290# TERM_PROGRAM=Apple_Terminal 16291# TERM_PROGRAM_VERSION=41 # in Terminal.app version 41 16292# TERM_PROGRAM_VERSION=51 # in Terminal.app version 51 16293# 16294# For example, the following Bourne shell script would detect the 16295# correct terminal type: 16296# 16297# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ] 16298# then 16299# export TERM 16300# if [ :"$TERM_PROGRAM_VERSION" = :41 ] 16301# then 16302# TERM="nsterm" 16303# else 16304# TERM="nsterm-c-7" 16305# fi 16306# fi 16307# 16308# In a C shell derivative, this would be accomplished by: 16309# 16310# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then 16311# if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then 16312# if ( :"$TERM_PROGRAM_VERSION" == :41 ) then 16313# setenv TERM "nsterm" 16314# else 16315# setenv TERM "nsterm-c-7" 16316# endif 16317# endif 16318# endif 16319 16320# The '+' entries are building blocks 16321nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset, 16322 am, bw, msgr, xenl, xon, 16323 cols#80, it#8, lines#24, 16324 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 16325 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 16326 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 16327 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 16328 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 16329 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, 16330 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 16331 kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, 16332 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 16333 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 16334 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m, 16335 sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, 16336 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys, 16337 16338nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset, 16339 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 16340 enacs=\E(B\E)0, rmacs=^O, 16341 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 16342 smacs=^N, use=nsterm+7, 16343 16344nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset, 16345 acsc=0#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245+\335-\366\,\334.\377, 16346 enacs=\E(B\E)0, rmacs=^O, 16347 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 16348 smacs=^N, use=nsterm+7, 16349 16350nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support, 16351 hs, 16352 wsl#50, 16353 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, 16354 16355nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors), 16356 op=\E[0m, use=ibm+16color, 16357 16358nsterm+c41|AppKit Terminal.app v41 color support, 16359 colors#8, ncv#37, pairs#64, 16360 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 16361 16362# These are different combinations of the building blocks 16363 16364# ASCII charset (-7) 16365nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome), 16366 use=nsterm+7, 16367 16368nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline), 16369 use=nsterm+s, use=nsterm+7, 16370 16371nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color), 16372 use=nsterm+c41, use=nsterm+7, 16373 16374nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color), 16375 use=nsterm+c, use=nsterm+7, 16376 16377nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline), 16378 use=nsterm+s, use=nsterm+c41, use=nsterm+7, 16379 16380nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline), 16381 use=nsterm+s, use=nsterm+c, use=nsterm+7, 16382 16383# VT100 alternate-charset (-acs) 16384nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome), 16385 use=nsterm+acs, 16386 16387nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline), 16388 use=nsterm+s, use=nsterm+acs, 16389 16390nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color), 16391 use=nsterm+c41, use=nsterm+acs, 16392 16393nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color), 16394 use=nsterm+c, use=nsterm+acs, 16395 16396nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline), 16397 use=nsterm+s, use=nsterm+c41, use=nsterm+acs, 16398 16399nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline), 16400 use=nsterm+s, use=nsterm+c, use=nsterm+acs, 16401 16402# MacRoman charset 16403nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome), 16404 use=nsterm+mac, 16405 16406nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline), 16407 use=nsterm+s, use=nsterm+mac, 16408 16409nsterm|Apple_Terminal|AppKit Terminal.app v41+ w/MacRoman charset (color), 16410 use=nsterm+c41, use=nsterm+mac, 16411 16412nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color), 16413 use=nsterm+c, use=nsterm+mac, 16414 16415nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline), 16416 use=nsterm+s, use=nsterm+c41, use=nsterm+mac, 16417 16418nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline), 16419 use=nsterm+s, use=nsterm+c, use=nsterm+mac, 16420 16421 16422# This entry is based on newsgroup comments by Alain Bench, Christian Ebert, 16423# and D P Schreber comparing to nsterm-c-s-acs. 16424# 16425# D P Schreber notes that $TERM can be set in Terminal.app, e.g., 16426# defaults write com.apple.Terminal TermCapString nsterm-c-s-acs 16427# and that it is not set in Terminal's preferences dialog. 16428nsterm-16color|AppKit Terminal.app v100.1.8 with MacOS X 10.3.9, 16429 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 16430 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 16431 knp=\E[6~, kpp=\E[5~, use=nsterm-c-s-acs, 16432 16433# xnuppc - Darwin PowerPC Console (a.k.a. "darwin") 16434# 16435# On PowerPC platforms, Apple's Darwin operating system uses a 16436# full-screen system console derived from a NetBSD framebuffer 16437# console. It is an ANSI-style terminal, and is not really VT-100 16438# compatible. 16439# 16440# Under Mac OS X, this is the system console driver used while in 16441# single-user mode [reachable by holding down Command-S during the 16442# boot process] and when logged in using console mode [reachable by 16443# typing ">console" at the graphical login prompt.] 16444# 16445# If you're looking for a description of the Terminal.app terminal 16446# emulator which runs under the Mac OS X Quartz windowing system (and 16447# other AppKit-supported windowing systems,) see the "nsterm" 16448# entry instead. 16449# 16450# NOTE: Under Mac OS X version 10.1, the default login window does not 16451# prompt for user name, instead requiring an icon to be selected from 16452# a list of known users. Since the special ">console" login is not in 16453# this list, you must make one of two changes in the Login Window 16454# panel of the Login section of System Prefs to make the special 16455# ">console" login accessible. The first option is to enable 'Show 16456# "Other User" in list for network users', which will add a special 16457# "Other..." icon to the graphical login panel. Selecting "Other..." 16458# will present the regular graphical login prompt. The second option 16459# is to change the 'Display Login Window as:' setting to 'Name and 16460# password entry fields', which replaces the login panel with a 16461# graphical login prompt. 16462# 16463# There are no function keys, at least not in Darwin 1.3. 16464# 16465# It has no mouse support. 16466# 16467# It has full ANSI color support, and color combines correctly with 16468# all three supported attributes: bold, inverse-video and underline. 16469# However, bold colored text is almost unreadable (bolding is 16470# accomplished using shifting and or-ing, and looks smeared) so bold 16471# has been excluded from the list of color-compatible attributes 16472# [using (ncv)]. The monochrome entry (-m) is useful if you use a 16473# monochrome monitor. 16474# 16475# There is one serious bug with this terminal emulation's color 16476# support: repositioning the cursor onto a cell with non-matching 16477# colors obliterates that cell's contents, replacing it with a blank 16478# and displaying a colored cursor in the "current" colors. There is 16479# no complete workaround at present [other than using the monochrome 16480# (-m) entries,] but removing the (msgr) capability seemed to help. 16481# 16482# The "standout" chosen was simple reverse-video, although a colorful 16483# standout might be more aesthetically pleasing. Similarly, the bold 16484# chosen is the terminal's own smeared bold, although a simple 16485# color-change might be more readable. The color-bold (-b) entries 16486# uses magenta colored text for bolding instead. The fancy color (-f 16487# and -f2) entries use color for bold, standout and underlined text 16488# (underlined text is still underlined, though.) 16489# 16490# Apparently the terminal emulator does support a VT-100-style 16491# alternate character set, but all the alternate character set 16492# positions have been left blank in the font. For this reason, no 16493# alternate character set capabilities have been included in this 16494# description. The console driver appears to be ASCII-only, so (enacs) 16495# has been excluded [although the VT-100 sequence does work.] 16496# 16497# The default Mac OS X and Darwin installation reports "vt100" as the 16498# terminal type, and exports no helpful environment variables. To fix 16499# this, change the "console" entry in /etc/ttys from "vt100" to 16500# "xnuppc-WxH", where W and H are the character dimensions of your 16501# console (see below.) 16502# 16503# The font used by the terminal emulator is apparently one originally 16504# drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This 16505# file includes descriptions for the following geometries: 16506# 16507# Pixels Characters Entry Name (append -m for monochrome) 16508# ------------------------------------------------------------------- 16509# 640x400 80x25 xnuppc-80x25 16510# 640x480 80x30 xnuppc-80x30 16511# 720x480 90x30 xnuppc-90x30 16512# 800x600 100x37 xnuppc-100x37 16513# 896x600 112x37 xnuppc-112x37 16514# 1024x640 128x40 xnuppc-128x40 16515# 1024x768 128x48 xnuppc-128x48 16516# 1152x768 144x48 xnuppc-144x48 16517# 1280x1024 160x64 xnuppc-160x64 16518# 1600x1024 200x64 xnuppc-200x64 16519# 1600x1200 200x75 xnuppc-200x75 16520# 2048x1536 256x96 xnuppc-256x96 16521# 16522# The basic "xnuppc" entry includes no size information, and the 16523# emulator includes no reporting capability, so you'll be at the mercy 16524# of the TTY device (which reports incorrectly on my hardware.) The 16525# color-bold entries do not include size information. 16526 16527# The '+' entries are building blocks 16528xnuppc+basic|Darwin PowerPC Console basic capabilities, 16529 am, bce, mir, xenl, 16530 it#8, 16531 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 16532 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 16533 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 16534 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K, 16535 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177, 16536 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8, 16537 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, 16538 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 16539 sc=\E7, 16540 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 16541 sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, 16542 smul=\E[4m, tbc=\E[3g, use=vt100+keypad, 16543 16544xnuppc+c|Darwin PowerPC Console ANSI color support, 16545 colors#8, ncv#32, pairs#64, 16546 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 16547 16548xnuppc+b|Darwin PowerPC Console color-bold support, 16549 ncv#32, 16550 bold=\E[35m, 16551 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 16552 use=xnuppc+basic, 16553 16554xnuppc+f|Darwin PowerPC Console fancy color support, 16555 ncv#35, 16556 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m, 16557 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b, 16558 16559xnuppc+f2|Darwin PowerPC Console alternate fancy color support, 16560 ncv#35, 16561 bold=\E[33m, 16562 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m, 16563 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic, 16564 16565# Building blocks for specific screen sizes 16566xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels), 16567 cols#80, lines#25, 16568 16569xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels), 16570 cols#80, lines#30, 16571 16572xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels), 16573 cols#90, lines#30, 16574 16575xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels), 16576 cols#100, lines#37, 16577 16578xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels), 16579 cols#112, lines#37, 16580 16581xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels), 16582 cols#128, lines#40, 16583 16584xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels), 16585 cols#128, lines#48, 16586 16587xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels), 16588 cols#144, lines#48, 16589 16590xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels), 16591 cols#160, lines#64, 16592 16593xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels), 16594 cols#200, lines#64, 16595 16596xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels), 16597 cols#200, lines#75, 16598 16599xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels), 16600 cols#256, lines#96, 16601 16602# These are different combinations of the building blocks 16603 16604xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome), 16605 use=xnuppc+basic, 16606 16607xnuppc|darwin|Darwin PowerPC Console (color), 16608 use=xnuppc+c, use=xnuppc+basic, 16609 16610xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold), 16611 use=xnuppc+b, 16612 16613xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold), 16614 use=xnuppc+b, use=xnuppc+c, 16615 16616xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome), 16617 use=xnuppc+f, 16618 16619xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color), 16620 use=xnuppc+f, use=xnuppc+c, 16621 16622xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome), 16623 use=xnuppc+f2, 16624 16625xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color), 16626 use=xnuppc+f2, use=xnuppc+c, 16627 16628# Combinations for specific screen sizes 16629xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25, 16630 use=xnuppc+80x25, use=xnuppc+basic, 16631 16632xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25, 16633 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic, 16634 16635xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30, 16636 use=xnuppc+80x30, use=xnuppc+basic, 16637 16638xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30, 16639 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic, 16640 16641xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30, 16642 use=xnuppc+90x30, use=xnuppc+basic, 16643 16644xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30, 16645 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic, 16646 16647xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37, 16648 use=xnuppc+100x37, use=xnuppc+basic, 16649 16650xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37, 16651 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic, 16652 16653xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37, 16654 use=xnuppc+112x37, use=xnuppc+basic, 16655 16656xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37, 16657 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic, 16658 16659xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40, 16660 use=xnuppc+128x40, use=xnuppc+basic, 16661 16662xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40, 16663 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic, 16664 16665xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48, 16666 use=xnuppc+128x48, use=xnuppc+basic, 16667 16668xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48, 16669 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic, 16670 16671xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48, 16672 use=xnuppc+144x48, use=xnuppc+basic, 16673 16674xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48, 16675 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic, 16676 16677xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64, 16678 use=xnuppc+160x64, use=xnuppc+basic, 16679 16680xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64, 16681 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic, 16682 16683xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64, 16684 use=xnuppc+200x64, use=xnuppc+basic, 16685 16686xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64, 16687 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic, 16688 16689xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75, 16690 use=xnuppc+200x75, use=xnuppc+basic, 16691 16692xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75, 16693 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic, 16694 16695xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96, 16696 use=xnuppc+256x96, use=xnuppc+basic, 16697 16698xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96, 16699 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic, 16700 16701#### Radio Shack/Tandy 16702# 16703 16704# (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7". 16705# I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr) 16706# From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90 16707coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II, 16708 OTbs, am, 16709 cols#80, it#8, lines#24, 16710 bel=^G, blink=^_", bold=\E\:^A, civis=^E\s, 16711 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F, 16712 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I, 16713 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J, 16714 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#, 16715 sgr0=\037!\E\:\0, smso=^_\s, smul=^_", 16716# (trs2: removed obsolete ":nl=^_:" -- esr) 16717trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M, 16718 OTbs, am, msgr, 16719 cols#80, it#8, lines#24, 16720 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^], 16721 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B, 16722 el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\, 16723 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N, 16724# From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu> 16725# (This had extension capabilities 16726# :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\ 16727# :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@: 16728# I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr) 16729trs16|trs-80 model 16 console, 16730 OTbs, am, 16731 cols#80, it#8, lines#24, 16732 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L, 16733 cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 16734 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 16735 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL, 16736 ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 16737 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S, 16738 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, 16739 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@, 16740 smacs=\ERG, smso=\ERD, 16741 16742#### Atari ST 16743# 16744 16745# From: Simson L. Garfinkel <simsong@media-lab.mit.edu> 16746atari|atari st, 16747 OTbs, am, 16748 cols#80, it#8, lines#25, 16749 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 16750 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, 16751 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB, 16752 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep, 16753# UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode 16754# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu> 16755uniterm|uniterm49|UniTerm VT220 emulator with 49 lines, 16756 lines#49, 16757 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, 16758 use=vt220, 16759# MiNT VT52 emulation. 80 columns, 25 rows. 16760# MiNT is Now TOS, the operating system which comes with all Ataris now 16761# (mainly Atari Falcon). This termcap is for the VT52 emulation you get 16762# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode 16763# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996 16764st52|Atari ST with VT52 emulation, 16765 am, km, 16766 cols#80, lines#25, 16767 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED, 16768 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 16769 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, 16770 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1, 16771 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M, 16772 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>, 16773 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G, 16774 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek, 16775 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq, 16776 smcup=\Ee, smso=\Ep, 16777 16778#### Commodore Business Machines 16779# 16780# Formerly located in West Chester, PA; went spectacularly bust in 1994 16781# after years of shaky engineering and egregious mismanagement. Made one 16782# really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64, 16783# C-128, VIC-20). The C-64 is said to have been the most popular machine 16784# ever (most units sold); they can still be found gathering dust in closets 16785# everywhere. 16786# 16787 16788# From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90 16789# Added a few more entries, converted caret-type control sequence (^x) entries 16790# to '\0xx' entries since a couple of people mentioned losing '^x' sequences. 16791# Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998 16792# 16793# :as:, :ae: Support for alternate character sets. 16794# :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible. 16795# :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept) 16796# This one appears to fix a problem I always had with a line ending 16797# at 'width+1' (I think) followed by a blank line in vi. The blank 16798# line tended to disappear and reappear depending on how the screen 16799# was refreshed. Note that this is probably needed only if you use 16800# something like a Dnet Fterm with the window sized to some peculiar 16801# dimension larger than 80 columns. 16802# :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;' 16803# (amiga: removed obsolete :kn#10:, 16804# also added empty <acsc> to suppress a warning --esr) 16805amiga|Amiga ANSI, 16806 OTbs, am, bw, xenl, 16807 cols#80, lines#24, 16808 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z, 16809 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD, 16810 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 16811 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 16812 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 16813 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 16814 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 16815 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H, 16816 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~, 16817 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, 16818 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m, 16819 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m, 16820 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m, 16821 16822# From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995 16823# (amiga: added empty <acsc> to suppress a warning. 16824# I'm told this entry screws up badly with AS225, the Amiga 16825# TCP/IP package once from Commodore, and now sold by InterWorks.--esr) 16826amiga-h|Hans Verkuil's Amiga ANSI, 16827 OTbs, bw, msgr, 16828 cols#80, lines#24, 16829 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z, 16830 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M, 16831 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B, 16832 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, 16833 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, 16834 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G, 16835 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S, 16836 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H, 16837 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, 16838 kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~, 16839 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~, 16840 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T, 16841 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m, 16842 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l, 16843 smso=\2337m, smul=\2334m, 16844 16845# From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999 16846# 16847# Pavel Fedin added 16848# Home Shift+Left 16849# End Shift+Right 16850# PgUp Shift+Up 16851# PgDn Shift+Down 16852amiga-8bit|Amiga ANSI using 8-bit controls, 16853 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L, 16854 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S, 16855 kpp=\233T, ri=\215, rin@, use=amiga-h, 16856 16857# From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000 16858# requires use of appropriate preferences settings. 16859amiga-vnc|Amiga using VNC console (black on light gray), 16860 am, da, db, msgr, ndscr, 16861 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256, 16862 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p, 16863 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M, 16864 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 16865 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 16866 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 16867 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 16868 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G, 16869 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED, 16870 indn=\E[%p1%dS, invis=\E8m, 16871 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h, 16872 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 16873 kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~, 16874 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~, 16875 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~, 16876 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m, 16877 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J, 16878 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec, 16879 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h, 16880 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m, 16881 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m, 16882 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h, 16883 smso=\E[1m, smul=\E[4m, 16884 16885# MorphOS on Genesi Pegasos 16886# By Pavel Fedin <sonic_amiga@rambler.ru> 16887morphos, 16888 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L, 16889 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~, 16890 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~, 16891 ri=\215, rin@, use=amiga-h, 16892 16893# Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA> 16894# I'm trying to write a termcap for a commodore b-128, and I'm 16895# having a little trouble. I've had to map most of my control characters 16896# to something that unix will accept (my delete-char is a ctrl-t, etc), 16897# and create some functions (like cm), but thats life. 16898# The problem is with the arrow keys - right, and up work fine, but 16899# left deletes the previous character and down I just can't figure out. 16900# Jove knows what I want, but I don't know what it's sending to me (it 16901# isn't thats bound to next-line in jove). 16902# Anybody got any ideas? Here's my termcap. 16903# DAG -- I changed his "^n" entries to "\n"; see if that works. 16904# 16905commodore|b-128|Commodore B-128 micro, 16906 am, bw, 16907 OTdN#20, cols#80, lines#24, pb#150, 16908 OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J, 16909 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P, 16910 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>, 16911 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>, 16912 kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=, 16913 smir=, 16914 16915#### North Star 16916# 16917# North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL 16918northstar|North Star Advantage, 16919 OTbs, 16920 cols#80, lines#24, 16921 clear=\004$<200/>, 16922 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>, 16923 el=\016$<200/>, home=\034\032$<200/>, 16924 16925#### Osborne 16926# 16927# Thu Jul 7 03:55:16 1983 16928# 16929# As an aside, be careful; it may sound like an anomaly on the 16930# Osborne, but with the 80-column upgrade, it's too easy to 16931# enter lines >80 columns! 16932# 16933# I've already had several comments... 16934# The Osborne-1 with the 80-col option is capable of being 16935# 52, 80, or 104 characters wide; default to 80 for compatibility 16936# with most systems. 16937# 16938# The tab is destructive on the Ozzie; make sure to 'stty -tabs'. 16939osborne-w|osborne1-w|osborne I in 104-column mode, 16940 msgr, ul, xt, 16941 cols#104, lines#24, 16942 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 16943 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 16944 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J, 16945 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El, 16946# Osborne I from ptsfa!rhc (Robert Cohen) via BRL 16947osborne|osborne1|osborne I in 80-column mode, 16948 OTbs, am, mir, msgr, ul, xhp, 16949 OTdB#4, cols#80, lines#24, 16950 clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L, 16951 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 16952 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H, 16953 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E), 16954 rmul=\Em, smir=\EQ, smso=\E(, smul=\El, 16955# 16956# Osborne Executive definition from BRL 16957# Similar to tvi920 16958# Added by David Milligan and Tom Smith (SMU) 16959osexec|Osborne executive, 16960 OTbs, am, 16961 OTug#1, cols#80, lines#24, xmc#1, 16962 OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 16963 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 16964 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, 16965 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, 16966 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, 16967 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, 16968 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej, 16969 smul=\El, tbc=\E3, 16970 16971#### Console types for obsolete UNIX clones 16972# 16973# Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088 16974# machines that tried to emulate the UNIX look'n'feel. Coherent and Venix 16975# were commercial, Minix an educational tool sold in conjunction with a book. 16976# Memory-segmentation limits and a strong tendency to look like V7 long after 16977# it was obsolete made all three pretty lame. Venix croaked early. Coherent 16978# and Minix were ported to 32-bit Intel boxes, only to be run over by a 16979# steamroller named `Linux' (which, to be fair, traces some lineage to Minix). 16980# Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There 16981# are also, I'm told, Minix ports that ran on Amiga and Atari machines and 16982# even as single processes under SunOS and the Macintosh OS. 16983# 16984 16985# This is the entry provided with minix 1.7.4, with bogus :ri: removed. 16986minix|minix console (v1.7), 16987 am, xenl, 16988 cols#80, it#8, lines#25, 16989 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M, 16990 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 16991 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 16992 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 16993 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I, 16994 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 16995 is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 16996 kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, 16997 kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +, 16998 lf4=Num -, lf5=Num 5, nel=^M^J, rev=\E[7m, ri=\EM, 16999 rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m, 17000# Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil> 17001minix-old|minix console (v1.5), 17002 xon, 17003 cols#80, it#8, lines#25, 17004 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M, 17005 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 17006 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 17007 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 17008 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I, 17009 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 17010 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 17011 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G, 17012 khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m, 17013 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m, 17014# The linewrap option can be specified by editing /usr/include/minix/config.h 17015# before recompiling the minix 1.5 kernel. 17016minix-old-am|minix console with linewrap, 17017 am, use=minix-old, 17018 17019pc-minix|minix console on an Intel box, 17020 use=klone+acs, use=minix, 17021 17022# According to the Coherent 2.3 manual, the PC console is similar 17023# to a z19. The differences seem to be (1) 25 lines, (2) no status 17024# line, (3) standout is broken, (4) ins/del line is broken, (5) 17025# has blinking and bold. 17026pc-coherent|pcz19|coherent|IBM PC console running Coherent, 17027 am, mir, 17028 cols#80, it#8, lines#25, 17029 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 17030 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN, 17031 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, 17032 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO, 17033 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep, 17034 17035# According to the Venix 1.1 manual, the PC console is similar 17036# to a DEC vt52. Differences seem to be (1) arrow keys send 17037# different strings, (2) enhanced standout, (3) added insert/delete line. 17038# Note in particular that it doesn't have automatic margins. 17039# There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they 17040# not described here because this derives from an old termcap entry. 17041pc-venix|venix|IBM PC console running Venix, 17042 cols#80, it#8, lines#25, 17043 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 17044 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, 17045 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK, 17046 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI, 17047 17048#### Miscellaneous microcomputer consoles 17049# 17050# If you know anything more about any of these, please tell me. 17051# 17052 17053# The MAI Basic Four computer was obsolete at the end of the 1980s. 17054# It may be used as a terminal by putting it in "line" mode as seen on 17055# one of the status lines. 17056# Initialization is similar to CIT80. <is2> will set ANSI mode for you. 17057# Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so 17058# wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I 17059# used \ED instead. 17060# From: bf347@lafn.org (David Lawyer), 28 Jun 1997 17061mai|basic4|MAI Basic Four in ansi mode, 17062 am, da, db, mir, msgr, 17063 cols#82, it#8, lines#25, 17064 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h, 17065 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X, 17066 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P, 17067 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I, 17068 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED, 17069 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H, 17070 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 17071 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, 17072 kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T, 17073 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, 17074 smir=\E[4h, smso=\E[7m, smul=\E[4m, 17075# basis from Peter Harrison, Computer Graphics Lab, San Francisco 17076# ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA 17077# 17078# On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote: 17079# The Basis 108 was a Apple II clone, manufactured by the "Basis 17080# Mikrocomputer GmbH" in Munster, Germany (the company still exists today, 17081# about 1,5 km from where I live, but doesn't build own computers any 17082# more). A Basis 108 featured a really heavy (cast aluminium?) case, was 17083# equipped with one or two 5.25" disk drives, had a monochrome and colour 17084# video output for a TV set or a dedicated monitor and several slots for 17085# Apple II cards. Basis 108 were quite popular at german schools before 17086# the advent of the IBM PC. They run, for example, the UCSD Pascal 17087# development system (which I used even in 1993 to program the steering 17088# and data recording for our school's experimental solar panel :), Apple DOS 17089# or CP/M. 17090# (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr) 17091basis|BASIS108 computer with terminal translation table active, 17092 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H, 17093 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E), 17094 smso=\E(, use=adm3a, 17095# luna's BMC terminal emulator 17096luna|luna68k|LUNA68K Bitmap console, 17097 cols#88, lines#46, use=ansi-mini, 17098megatek|pegasus workstation terminal emulator, 17099 am, os, 17100 cols#83, lines#60, 17101# The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived 17102# interface (pre-Macintosh by several years) that went nowhere. 17103xerox820|x820|Xerox 820, 17104 am, 17105 cols#80, lines#24, 17106 bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 17107 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X, 17108 home=^^, ind=^J, 17109 17110#### Videotex and teletext 17111# 17112 17113# \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429) 17114# \E[?3l 80 columns 17115# \E[?4l scrolling on 17116# \E[12h local echo off 17117# \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen 17118# \E)0 G1 DEC set (line graphics) 17119# 17120# From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997 17121m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique, 17122 OTbs, eslok, hs, xenl, 17123 cols#80, it#8, lines#24, wsl#72, xmc#0, 17124 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G, 17125 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J, 17126 cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr, 17127 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 17128 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 17129 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 17130 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J, 17131 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>, 17132 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0, 17133 is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, 17134 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp, 17135 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, 17136 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H, 17137 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H, 17138 mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 17139 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 17140 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m, 17141 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A, 17142 u6=\E[%i%d;%dR, u7=\E[6n, 17143 17144# From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998 17145# 17146minitel1|minitel 1, 17147 am, bw, eslok, hs, hz, msgr, 17148 colors#8, cols#40, lines#24, pairs#8, 17149 acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L, 17150 cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I, 17151 cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X, 17152 enacs=^Y, fsl=^J, home=^^, ind=^J, 17153 is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG, 17154 rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\, 17155 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;, 17156 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;, 17157 sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c, 17158# is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON. 17159minitel1b|minitel 1-bistandard (in 40cols mode), 17160 mir, 17161 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 17162 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 17163 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L, 17164 is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D, 17165 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, 17166 kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l, 17167 smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1, 17168# <rmkx> posait des problemes (logout en sortant de vi). 17169minitel1b-80|minitel 1-bistandard (standard teleinformatique), 17170 am@, bw@, hz@, 17171 colors@, cols#80, it#8, pairs@, 17172 blink=\E[5m, bold=\E[1m, civis=\037@A\024\n, 17173 clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C, 17174 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 17175 ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq, 17176 kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw, 17177 kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m, 17178 ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@, 17179 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, 17180 sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b, 17181 17182######## OBSOLETE VDT TYPES 17183# 17184# These terminals are *long* dead -- these entries are retained for 17185# historical interest only. 17186 17187#### Amtek Business Machines 17188# 17189 17190# (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y", 17191# but these caps were commented out in 8.3; also, removed overridden 17192# ":do=^J:" -- esr) 17193abm80|amtek business machines 80, 17194 OTbs, am, bw, 17195 cols#80, lines#24, 17196 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P, 17197 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L, 17198 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, 17199 17200#### Bell Labs blit terminals 17201# 17202# These were AT&T's official entries. The 5620 FAQ maintained by 17203# David Breneman <daveb@dgtl.com> has this to say: 17204# 17205# Actually, in the beginning was the Jerq, and the Jerq was white with a 17206# green face, and Locanthi and Pike looked upon the Jerq and said the Jerq 17207# was good. But lo, upon the horizon loomed a mighty management-type person 17208# (known now only by the initials VP) who said, the mighty Jerq must stay 17209# alone, and could not go forth into the world. So Locanthi and Pike put the 17210# Jerq to sleep, cloned its parts, and the Blit was brought forth unto the 17211# world. And the Jerq lived the rest of its days in research, but never 17212# strayed from those paths. 17213# 17214# In all seriousness, the Blit was originally known as the Jerq, but when 17215# it started to be shown outside of the halls of the Bell Labs Research 17216# organization, the management powers that be decided that the name could 17217# not remain. So it was renamed to be Blit. This was in late 1981. 17218# 17219# (The AT&T 5620 was the commercialized Blit. Its successors were the 630, 17220# 730, and 730+.) 17221# 17222 17223blit|jerq|blit running teletype rom, 17224 am, eo, ul, xon, 17225 cols#87, it#8, lines#72, 17226 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, 17227 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, 17228 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c, 17229 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!, 17230 il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED, 17231 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez, 17232 17233# (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr) 17234cbblit|fixterm|blit running columbus code, 17235 cols#88, 17236 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d, 17237 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!, 17238 smul=\EU", use=blit, 17239 17240oblit|ojerq|first version of blit rom, 17241 am, da, db, eo, mir, ul, xon, 17242 cols#88, it#8, lines#72, 17243 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, 17244 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO, 17245 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G, 17246 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER, 17247 smir=\EQ, 17248 17249#### Bolt, Beranek & Newman (bbn) 17250# 17251# The BitGraph was a product of the now-defunct BBN Computer Corporation. 17252# The parent company, best known as the architects of the Internet, is 17253# still around. 17254# 17255# Jeff DelPapa <dp@world.std.com> writes: 17256# The bitgraph was a large white box that contained a monochrome bitmap 17257# display, and a 68000 to run it. You could download code and run it on 17258# the cpu, it had 128kb (I think) of memory. I used one in the late 17259# 70's, sure beat a vt100. It had one strange feature tho -- it used 17260# the cpu to bitblt pixels to scroll, it took longer than the refresh 17261# rate, and looked like a rubber sheet stretching, then snapping 17262# upwards. It had everything the early mac had, except a floppy drive a 17263# small screen (it had a 17" crisp beauty) and a real OS. They (Bolt 17264# Beranek and Neuman) sold at most a few hundred of them to the real 17265# world. DOD may have bought more... 17266# 17267 17268# Entries for the BitGraph terminals. The problem 17269# with scrolling in vi can only be fixed by getting BBN to put 17270# smarter scroll logic in the terminal or changing vi or padding 17271# scrolls with about 500 ms delay. 17272# 17273# I always thought the problem was related to the terminal 17274# counting newlines in its input buffer before scrolling and 17275# then moving the screen that much. Then vi comes along and 17276# paints lines in on the bottom line of the screen, so you get 17277# this big white gap. 17278 17279bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video), 17280 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h, 17281 use=bg2.0, 17282bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video), 17283 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, 17284 use=bg2.0, 17285bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init), 17286 OTbs, xenl, 17287 cols#85, lines#64, 17288 bel=^G, clear=\E[H\E[J$<150>, cr=^M, 17289 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 17290 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>, 17291 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>, 17292 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 17293 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1, 17294 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7, 17295 sgr0=\E[m, smkx=\E=, smso=\E[7m, 17296 17297bg1.25rv|bbn bitgraph 1.25 (reverse video), 17298 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, 17299 use=bg1.25, 17300bg1.25nv|bbn bitgraph 1.25 (normal video), 17301 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h, 17302 use=bg1.25, 17303# (bg1.25: I added <rmam>/<smam> based on the init string -- esr) 17304bg1.25|bbn bitgraph 1.25, 17305 cols#85, lines#64, 17306 bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B, 17307 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, 17308 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I, 17309 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB, 17310 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES, 17311 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l, 17312 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=, 17313 smso=\E[7m, 17314 17315#### Bull (bq, dku, vip) 17316# 17317# (Adapted for terminfo; AIX extension capabilities translated -- esr) 17318 17319#============================================# 17320# BULL QUESTAR 210 `SDP' terminals emulation # 17321#============================================# 17322# 17323# Description written by R.K.Saunders (Bull Transac) 17324# 17325# Modifications written by F. Girard (Bull MTS) 17326# 19-05-87 V02.00.01 17327# 17-12-87 V02.00.02 17328# 15-09-89 V02.00.05 17329# 17330# Typical technical selections F1 (modes SDP/ROLL): 17331# ------------------------------------------------------- 17332# | 01 02 03 04 05 06 07 08 09 10 | 17333# | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 | 17334# | | 17335# | 11 12 13 14 15 16 17 18 19 20 | 17336# | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 | 17337# | | 17338# | 21 22 23 24 25 26 27 28 29 30 | 17339# | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 | 17340# | | 17341# | 31 32 33 34 35 36 37 38 39 40 | 17342# | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 | 17343# ------------------------------------------------------- 17344# Typical firmware identification F5 "etat 6": 17345# P287.02.04b (AZERTY) 17346# P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764) 17347# P298.03.03 (monochrome) or P374.03.02 (colour) 17348# 17349# SM SDP mode (VIP command): ^[[?=h 17350# RIS (erases screen): ^[c 17351# DMI disable keyboard: ^[` 17352# SM double rendition mode: ^[[?>h 17353# RM solicited status mode: ^[[5l 17354# RM character mode: ^[[>l 17355# RM echoplex mode: ^[[12l 17356# RM column tab mode: ^[[18l 17357# RM forbid SS2 keyboard mode: ^[[?<l 17358# SM scroll mode: ^[[=h 17359# FCF enable XON/XOFF: ^[P1s^[\ 17360# MTL select end msg character: ^[[^Wp 17361# EMI enable keyboard: ^[b 17362# RIS retour etat initial: ^[c 17363# enable FC keypad: ^[[?<h, 17364# MPW map status line window: ^[PY99:98^[\ 17365# SCP select status line: ^[[0;98v 17366# ED erase entire partition: ^[[2J 17367# SCP select main partition: ^[[v 17368# SM character insertion mode: ^[[4h 17369# RM character replacement mode: ^[[4l 17370# COO cursor on: ^[[r 17371# COO cursor off: ^[[1r 17372# SGR dim (turquoise) rev attr: ^[[2;7m 17373# SGR Data normal attr: ^[[m 17374# SO Line-graphic mode ON: ^N 17375# SI Line-graphic mode OFF: ^O 17376# MC start routing to printer: ^[[5i 17377# MC stop routing to printer: ^M^[[4i 17378# 17379 17380# This entry covers the following terminals: 17381# dku7102, tws2102, and tws models 2105 to 2112 17382tws-generic|dku7102|Bull Questar tws terminals, 17383 am, eslok, hs, mir, msgr, xenl, xhp@, xon, 17384 cols#80, it#8, lines#24, wsl#80, 17385 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~, 17386 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J, 17387 cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, 17388 cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df, 17389 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 17390 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M, 17391 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K, 17392 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL, 17393 il1=\E[L, ind=^J, invis=\E[0;8m, 17394 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\, 17395 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p, 17396 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D, 17397 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, 17398 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027, 17399 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027, 17400 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H, 17401 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i, 17402 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O, 17403 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m, 17404 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N, 17405 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 17406 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\, 17407 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[2g, 17408 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m, 17409tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA, 17410 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v, 17411 use=tws-generic, 17412tws2103|xdku|BULL Questar tws2103, 17413 ht=^I, use=tws-generic, 17414tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA, 17415 ht=^I, use=tws2102-sna, 17416dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6), 17417 clear=\E[2J\E[H, cup@, dl@, dl1@, 17418 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m, 17419 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m, 17420 use=tws-generic, 17421dku7202|BULL Questar 200 DKU7202 (colour/character attributes), 17422 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb, 17423 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic, 17424 17425#=========================================================# 17426# BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation # 17427#=========================================================# 17428# 17429# Description written by J. Staerck (BULL SA) 17430# Copyright (c) 1989 BULL SA 17431#--------------------------------------------------------------------------- 17432# This entry is used for terminals with vt320 emulation mode 17433# and following set-up : 17434# 8 bit ISO Latin Character Set (ISO 8859-1), 17435# 7 bit Control Characters, 17436# 80 columns screen. 17437# Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300) 17438# They are used in string capabilities with vt220-320 emulation mode. 17439# In the following DEC definitions, two kinds of terminfo databases are 17440# provided : 17441# 1. the first with Command Sequence Introducer starting with escape 17442# sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode. 17443# 2. the second with Command Sequence Introducer starting with escape 17444# sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B. 17445# Soft Terminal Reset esc [ ! p 17446# RIS (erases screen): esc c 17447# DECKPNM numeric keypad mode: esc > 17448# DECKPAM applic. keypad mode: esc = 17449# DECSTBM Scrolling region: esc [ r 17450# SCS select G0 = US: esc ( B 17451# SCS select G1 = line-graphic: esc ) 0 17452# Select 7-bit C1 controls: esc sp F 17453# Select 8-bit C1 controls: esc sp G 17454# Select cursor home: esc [ H 17455# Select erase screen: esc [ J 17456# SM KAM lock keyboard: esc [ 2 h 17457# RM KAM unlock keyboard: esc [ 2 l 17458# SM SRM local echo off: esc [ 1 2 h 17459# RM SRM local echo on: esc [ 1 2 l 17460# SM LNM New line : esc [ 2 0 h 17461# RM LNM return = CR only: esc [ 2 0 l 17462# SM DECCKM cursor keys mode: esc [ ? 1 h 17463# RM DECCKM appli. keys mode: esc [ ? 1 l 17464# SM DECANM ANSI mode on: esc [ ? 2 h 17465# RM DECANM ANSI mode off: esc [ ? 2 l 17466# SM DECCOLM 132-column screen: esc [ ? 3 h 17467# RM DECCOLM 80-column screen: esc [ ? 3 l 17468# SM DECSCLM Smooth scroll: esc [ ? 4 h 17469# RM DECSCLM Jump scroll: esc [ ? 4 l 17470# SM DECSCNM screen light backgr. esc [ ? 5 h 17471# RM DECSCNM screen dark backgr. esc [ ? 5 l 17472# SM DECOM move within margins: esc [ ? 6 h 17473# RM DECOM move outside margins: esc [ ? 6 l 17474# SM DECAWM auto right margin: esc [ ? 7 h 17475# RM DECAWM auto right margin: esc [ ? 7 l 17476# SM DECARM auto repeat: esc [ ? 8 h 17477# RM DECARM auto repeat: esc [ ? 8 l 17478# DECSASD Select active main: esc [ 0 $ } 17479# DECSASD Select active status: esc [ 1 $ } 17480# DECSSDT Select status none: esc [ 0 $ ~ 17481# DECSSDT Select status indic.: esc [ 1 $ ~ 17482# DECSSDT Select status host-wr: esc [ 2 $ ~ 17483# SM DECTCEM Visible cursor: esc [ ? 2 5 h 17484# RM DECTCEM Invisible cursor: esc [ ? 2 5 l 17485# SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h 17486# RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l 17487# SM DECNKM numeric keypad mode: esc [ ? 6 6 h 17488# RM DECNKM numeric keypad appl.: esc [ ? 6 6 l 17489# SM DECKBUM clavier informatique esc [ ? 6 8 h 17490# RM DECKBUM clavier bureautique: esc [ ? 6 8 l 17491# DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p 17492# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p 17493# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p 17494# DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p 17495# Char. and Line attributes: esc [ Ps ... Ps m 17496# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse 17497# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off 17498# 17499 17500# This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310 17501bq300|Bull vt320 ISO Latin 1 80 columns terminal, 17502 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon, 17503 cols#80, it#8, lines#24, vt#3, wsl#80, 17504 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 17505 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 17506 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 17507 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 17508 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 17509 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 17510 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 17511 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J, 17512 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 17513 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I, 17514 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 17515 is1=\E[63;1"p\E[2h, 17516 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 17517 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy, 17518 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B, 17519 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~, 17520 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 17521 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 17522 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, 17523 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 17524 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 17525 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, 17526 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, 17527 ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l, 17528 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p, 17529 rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7, 17530 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;, 17531 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h, 17532 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m, 17533 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, 17534bq300-rv|Bull vt320 reverse 80 columns, 17535 flash=\E[?5l$<50>\E[?5h, 17536 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 17537 use=bq300, 17538bq300-w|Bull vt320 132 columns, 17539 cols#132, wsl#132, 17540 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 17541 rs2=\E[?3h, use=bq300, 17542bq300-w-rv|Bull vt320 reverse mode 132 columns, 17543 cols#132, wsl#132, 17544 flash=\E[?5l$<50>\E[?5h, 17545 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 17546 rs2=\E[?3h, use=bq300, 17547 17548# This entry is used for terminals with vt320 emulation mode 17549# and following set-up : 17550# 8 bit ISO Latin Character Set (ISO 8859-1), 17551# 8 bit Control Characters, (CSI coded as x9B for ESC [) 17552# 80 columns screen. 17553# Soft Terminal Reset csi ! p 17554# RIS (erases screen): esc c 17555# DECKPNM numeric keypad mode: esc > 17556# DECKPAM applic. keypad mode: esc = 17557# DECSTBM Scrolling region: esc [ r 17558# SCS select G0 = US: esc ( B 17559# SCS select G1 = line-graphic: esc ) 0 17560# Select 7-bit C1 controls: esc sp F 17561# Select 8-bit C1 controls: esc sp G 17562# Select cursor home: csi H 17563# Select erase screen: csi J 17564# SM KAM lock keyboard: csi 2 h 17565# RM KAM unlock keyboard: csi 2 l 17566# SM SRM local echo off: csi 1 2 h 17567# RM SRM local echo on: csi 1 2 l 17568# SM LNM New line : csi 2 0 h 17569# RM LNM return = CR only: csi 2 0 l 17570# SM DECCKM cursor keys mode: csi ? 1 h 17571# RM DECCKM appli. keys mode: csi ? 1 l 17572# SM DECANM ANSI mode on: csi ? 2 h 17573# RM DECANM ANSI mode off: csi ? 2 l 17574# SM DECCOLM 132-column screen: csi ? 3 h 17575# RM DECCOLM 80-column screen: csi ? 3 l 17576# SM DECSCLM Smooth scroll: csi ? 4 h 17577# RM DECSCLM Jump scroll: csi ? 4 l 17578# SM DECSCNM screen light backgr. csi ? 5 h 17579# RM DECSCNM screen dark backgr. csi ? 5 l 17580# SM DECOM move within margins: csi ? 6 h 17581# RM DECOM move outside margins: csi ? 6 l 17582# SM DECAWM auto right margin: csi ? 7 h 17583# RM DECAWM auto right margin: csi ? 7 l 17584# SM DECARM auto repeat: csi ? 8 h 17585# RM DECARM auto repeat: csi ? 8 l 17586# DECSASD Select active main: csi 0 $ } 17587# DECSASD Select active status: csi 1 $ } 17588# DECSSDT Select status none: csi 0 $ ~ 17589# DECSSDT Select status indic.: csi 1 $ ~ 17590# DECSSDT Select status host-wr: csi 2 $ ~ 17591# SM DECTCEM Visible cursor: csi ? 2 5 h 17592# RM DECTCEM Invisible cursor: csi ? 2 5 l 17593# SM DECNCRM 7 bits NCR set: csi ? 4 2 h 17594# RM DECNCRM Multi or ISO latin: csi ? 4 2 l 17595# DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p 17596# or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p 17597# DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p 17598# Char. and Line attributes: csi Ps ... Ps m 17599# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse 17600# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off 17601# (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr) 17602bq300-8|Bull vt320 full 8 bits 80 columns, 17603 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon, 17604 cols#80, it#8, lines#24, vt#3, wsl#80, 17605 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 17606 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l, 17607 clear=\233H\233J, cnorm=\233?25h, cr=^M, 17608 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cud=\233%p1%dB, 17609 cuf=\233%p1%dC, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, 17610 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, 17611 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J, 17612 el=\233K, el1=\2331K, enacs=\E(B\E)0, 17613 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H, 17614 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, ind=\ED, 17615 is1=\E[63;2"p\E[2h, 17616 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 17617 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w, 17618 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s, 17619 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, 17620 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~, 17621 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, 17622 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, 17623 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~, 17624 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~, 17625 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~, 17626 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, 17627 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, 17628 rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h, 17629 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, 17630 rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7, 17631 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;, 17632 sgr0=\2330m\E(B, smacs=^N, smam=\233?7h, 17633 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m, 17634 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~, 17635bq300-8rv|Bull vt320 8-bit reverse mode 80 columns, 17636 flash=\233?5l$<50>\233?5h, 17637 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 17638 use=bq300-8, 17639bq300-8w|Bull vt320 8-bit 132 columns, 17640 cols#132, wsl#132, 17641 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 17642 rs2=\233?3h, use=bq300-8, 17643bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns, 17644 cols#132, wsl#132, 17645 flash=\233?5l$<50>\233?5h, 17646 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 17647 rs2=\233?3h, use=bq300-8, 17648 17649# This entry is used for terminals with vt320 emulation mode 17650# a 102 keys keyboard (PC scancode !) and following set-up : 17651# 8 bit ISO Latin Character Set (ISO 8859-1), 17652# 7 bit Control Characters, 17653# 80 columns screen. 17654bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns, 17655 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~, 17656 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@, 17657 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~, 17658 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, 17659 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 17660 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300, 17661bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns, 17662 flash=\E[?5l$<50>\E[?5h, 17663 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 17664 use=bq300-pc, 17665bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal, 17666 cols#132, wsl#132, 17667 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 17668 rs2=\E[?3h, use=bq300-pc, 17669bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns, 17670 cols#132, wsl#132, 17671 flash=\E[?5l$<50>\E[?5h, 17672 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 17673 rs2=\E[?3h, use=bq300-pc, 17674# 8 bit ISO Latin Character Set (ISO 8859-1), 17675# 8 bit Control Characters, 17676# 80 columns screen. 17677bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns, 17678 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~, 17679 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@, 17680 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@, 17681 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~, 17682 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@, 17683 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@, 17684 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8, 17685bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns, 17686 flash=\E[?5l$<50>\E[?5h, 17687 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 17688 use=bq300-8-pc, 17689bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns, 17690 cols#132, wsl#132, 17691 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 17692 rs2=\E[?3h, use=bq300-8-pc, 17693bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns, 17694 cols#132, wsl#132, 17695 flash=\E[?5l$<50>\E[?5h, 17696 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 17697 rs2=\E[?3h, use=bq300-8-pc, 17698 17699#======================================================# 17700# BULL QUESTAR 310 `VIP 7800/8800' terminals emulation # 17701#======================================================# 17702 17703# normal mode, 8 bits, 80 columns terminal. 17704# RES reset : ^[e 17705# RIS reset initial state: ^[c 17706# BLE bell enable ^[h 17707# BLD bell disable ^[g 17708# CAMS char. attr. mode set ^[[D 17709# CAMR char. attr. mode reset ^[[G 17710# CLR clear ^[` 17711# KBU keyboard unlock (set) ^[[W 17712# KBL keyboard lock (reset) ^[[X 17713# CM character mode (async.) ^[k 17714# NEP non echoplex mode (by host) ^[l 17715# EP echoplex mode (by host) ^[m 17716# IM insert mode set ^[[I 17717# IM insert mode reset ^[[J 17718# RMS roll mode set ^[r 17719# RMR roll mode reset ^[q 17720# SM78 set mode vip7800 ^[[1q 17721# SD scroll up (72 lines) ^[[0s 17722# SD scroll down (72 lines) ^[[1s 17723# RBM block mode reset ^[[E 17724# SLS status line set ^[w 17725# SLR status line reset ^[v 17726# SLL status line lock ^[O 17727# LGS Line-graphic mode set ^[G 17728# LGR Line-graphic mode reset ^[F 17729# TBC tab clear (at cursor pos.) ^[[g 17730# TBI tab initialize ^[[N 17731# TBS tab set (at cursor pos.) ^[p 17732# PDS print data space ^[[0p 17733# PHD print host data ^[[3p 17734# PDT print data terminator ^[[<p 17735# PRES print adapter reset ^[[2p 17736# SSPR multi-part. reset ^[[<>u 17737# SSP0 partition 0 set ^[[00u 17738# SSP1 partition n format 1 ^[[PnPnSTRINGu 17739# SSP2 partition n format 2 ^[[PnPnSTRINGu 17740# SSP3 partition n format 3 ^[[PnPnu 17741# ATR attribute (visual) 17742# blink : ^[sB 17743# dim : ^[sL 17744# hide (blank) : ^[sH 17745# restore : ^[sR 17746# inverse video : ^[sI 17747# prot. : ^[sP 17748# underline : ^[s_ 17749# reset : ^{ 17750# 17751# This covers the vip7800 and BQ3155-vip7800 17752vip|Bull Questar 3155-7800, 17753 am, eslok, hs, km, mc5i, msgr, xenl, xon, 17754 cols#80, it#8, lines#24, vt#3, wsl#80, 17755 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB, 17756 cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 17757 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL, 17758 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK, 17759 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I, 17760 hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH, 17761 is2=\E[00u\E[<>001001024080024080u\E[01u, 17762 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H, 17763 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB, 17764 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ, 17765 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@, 17766 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1, 17767 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?, 17768 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_, 17769 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER, 17770 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s, 17771 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1, 17772 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p, 17773 mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI, 17774 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR, 17775 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG, 17776 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI, 17777 smul=\Es_, tbc=\E[N, tsl=\Ew, 17778# normal screen, 8 bits, 132 columns terminal. 17779vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide, 17780 cols#132, wsl#132, 17781 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip, 17782vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines, 17783 lines#72, 17784 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip, 17785vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines, 17786 cols#132, lines#72, wsl#132, 17787 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip, 17788 17789#### Chromatics 17790# 17791 17792# I have put the long strings in <smcup>/<rmcup>. Ti sets up a window 17793# that is smaller than the screen, and puts up a warning message 17794# outside the window. Te erases the warning message, puts the 17795# window back to be the whole screen, and puts the cursor at just 17796# below the small window. I defined <cnorm> and <civis> to really turn 17797# the cursor on and off, but I have taken this out since I don't 17798# like the cursor being turned off when vi exits. 17799cg7900|chromatics|chromatics 7900, 17800 am, 17801 cols#80, lines#40, 17802 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^], 17803 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2, 17804 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|, 17805 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,, 17806 rmso=\001C1\,\001c2\,, 17807 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,, 17808 smso=\001C4\,\001c7\,, uc=\001\001_\001\0, 17809 17810#### Computer Automation 17811# 17812 17813ca22851|computer automation 22851, 17814 am, 17815 cols#80, lines#24, 17816 bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I, 17817 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J, 17818 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^, 17819 17820#### Cybernex 17821# 17822 17823# This entry has correct padding and the undocumented "ri" capability 17824cyb83|xl83|cybernex xl-83, 17825 OTbs, am, 17826 cols#80, lines#24, 17827 bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I, 17828 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N, 17829 ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H, 17830 kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N, 17831# (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr) 17832cyb110|mdl110|cybernex mdl-110, 17833 OTbs, am, 17834 cols#80, lines#24, 17835 bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 17836 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, 17837 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>, 17838 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y, 17839 ht=\011$<43>, ich1=\016A\035$<3.5>, 17840 il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF, 17841 17842#### Datapoint 17843# 17844# Datapoint is gone. They used to be headquartered in Texas. 17845# They created ARCnet, an Ethernet competitor that flourished for a while 17846# in the early 1980s before 3COM got wise and cut its prices. The service 17847# side of Datapoint still lives (1995) in the form of Intelogic Trace. 17848# 17849 17850dp3360|datapoint|datapoint 3360, 17851 OTbs, am, 17852 cols#82, lines#25, 17853 bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z, 17854 ed=^_, el=^^, home=^], ind=^J, 17855 17856# From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997 17857# The Datapoint 8242 Workstation was sold at least between 1985 17858# and 1989. To make the terminal work with this entry, press 17859# CONTROL-INT-INT to take the terminal off-line, and type (opt). 17860# Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO 17861# CR/LF off. Use control-shift-[] as escape key, control-I as tab, 17862# shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in 17863# fact unusable because the strings sent by the terminal conflict 17864# with other keys). 17865# The terminal is capable of displaying "box draw" characters. 17866# For each graphic character you must send 2 ESC's (\E\E) followed 17867# by a control character as follows: 17868# character meaning 17869# ========= ======= 17870# ctrl-E top tee 17871# ctrl-F right tee 17872# ctrl-G bottom tee 17873# ctrl-H left tee 17874# ctrl-I cross 17875# ctrl-J top left corner 17876# ctrl-K top right corner 17877# ctrl-L bottom left corner 17878# ctrl-M bottom right corner 17879# ctrl-N horizontal line 17880# ctrl-O vertical line 17881# Unfortunately this cannot be fitted into the termcap/terminfo 17882# description scheme. 17883dp8242|datapoint 8242, 17884 msgr, 17885 cols#80, lines#25, 17886 bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X, 17887 cr=^M, cub1=^H, cud1=^J, 17888 cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V, 17889 home=^U, ht=^I, il1=\E^T, ind=^C, 17890 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004, 17891 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee, 17892 kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea, 17893 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J, 17894 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D, 17895 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004, 17896 smso=\E^E, smul=\E^F, 17897 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025, 17898 17899#### DEC terminals (Obsolete types: DECwriter and vt40/42/50) 17900# 17901# These entries are DEC's official terminfos for its older terminals. 17902# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support 17903# Engineering for more information. Updated terminfos and termcaps 17904# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. 17905# 17906 17907gt40|dec gt40, 17908 OTbs, os, 17909 cols#72, lines#30, 17910 bel=^G, cr=^M, cub1=^H, cud1=^J, 17911gt42|dec gt42, 17912 OTbs, os, 17913 cols#72, lines#40, 17914 bel=^G, cr=^M, cub1=^H, cud1=^J, 17915vt50|dec vt50, 17916 OTbs, 17917 cols#80, lines#12, 17918 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 17919 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J, 17920vt50h|dec vt50h, 17921 OTbs, 17922 cols#80, lines#12, 17923 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 17924 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 17925 el=\EK, ht=^I, ind=^J, ri=\EI, 17926# (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>) 17927vt61|vt-61|vt61.5|dec vt61, 17928 cols#80, lines#24, 17929 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J, 17930 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, 17931 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I, 17932 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 17933 ri=\E$<20>I, 17934 17935# The gigi does standout with red! 17936# (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr) 17937gigi|vk100|dec gigi graphics terminal, 17938 OTbs, am, xenl, 17939 cols#84, lines#24, 17940 bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H, 17941 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 17942 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J, 17943 el=\E[K, ht=^I, ind=^J, 17944 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h, 17945 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 17946 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM, 17947 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 17948 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m, 17949 smul=\E[4m, 17950 17951# DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce 17952# a PC differentiated from the IBM clones. It was a total, ludicrous, 17953# grossly-overpriced failure (among other things, DEC's OS didn't include 17954# a format program, so you had to buy pre-formatted floppies from DEC at 17955# a hefty premium!). 17956pro350|decpro|dec pro console, 17957 OTbs, 17958 cols#80, it#8, lines#24, 17959 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 17960 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC, 17961 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 17962 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 17963 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI, 17964 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG, 17965 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D, 17966 17967dw1|decwriter I, 17968 OTbs, hc, os, 17969 cols#72, 17970 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, 17971dw2|decwriter|dw|decwriter II, 17972 OTbs, hc, os, 17973 cols#132, 17974 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H, 17975# \E(B Use U.S. character set (otherwise # => british pound !) 17976# \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v) 17977# \E[w 10 char/in pitch 17978# \E[1;132 full width horizontal margins 17979# \E[2g clear all tab stops 17980# \E[z 6 lines/in 17981# \E[66t 66 lines/page (for \f) 17982# \E[1;66r full vertical page can be printed 17983# \E[4g clear vertical tab stops 17984# \E> disable alternate keypad mode (so it transmits numbers!) 17985# \E[%i%p1%du set tab stop at column %d (origin == 1) 17986# (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is 17987# a tab stop) 17988# 17989# The dw3 does standout with wide characters. 17990# 17991dw3|la120|decwriter III, 17992 OTbs, hc, os, 17993 cols#132, 17994 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, 17995 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>, 17996 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r, 17997 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w, 17998dw4|decwriter IV, 17999 OTbs, am, hc, os, 18000 cols#132, 18001 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H, 18002 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, 18003 18004# These aren't official 18005ln03|dec ln03 laser printer, 18006 hc, 18007 cols#80, lines#66, 18008 bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J, 18009 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m, 18010 smul=\E[4m, 18011ln03-w|dec ln03 laser printer 132 cols, 18012 cols#132, 18013 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, 18014 kcud1=^J, nel=^M^J, use=ln03, 18015 18016#### Delta Data (dd) 18017# 18018 18019# Untested. The cup sequence is hairy enough that it probably needs work. 18020# The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'. 18021# There are BSD-derived termcap entries floating around for this puppy 18022# that are *certainly* wrong. 18023delta|dd5000|delta data 5000, 18024 OTbs, am, 18025 cols#80, lines#27, 18026 bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y, 18027 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c, 18028 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J, 18029 18030#### Digital Data Research (ddr) 18031# 18032 18033# (ddr: I added <rmam>/<smam> based on the init string -- esr) 18034ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator, 18035 OTbs, am, xenl, 18036 cols#80, it#8, lines#24, vt#3, 18037 blink=\E[5m$<2/>, bold=\E[1m$<2/>, 18038 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H, 18039 cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, 18040 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, 18041 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H, 18042 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 18043 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>, 18044 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l, 18045 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>, 18046 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 18047 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m, 18048 smul=\E[4m$<2/>, 18049 18050#### Evans & Sutherland 18051# 18052 18053# Jon Leech <leech@cs.unc.edu> tells us: 18054# The ps300 was the Evans & Sutherland Picture System 300, a high 18055# performance 3D vector graphics system with a bunch of specialized hardware. 18056# Approximate date of release was 1982 (early 80s, anyway), and it had several 18057# evolutions including (limited) color versions such as the PS330C. PS300s 18058# were effectively obsolete by the late 80s, replaced by raster graphics 18059# systems, although specialized applications like molecular modelling 18060# hung onto them for a while longer. AFAIK all E&S vector graphics systems 18061# are out of production, though of course E&S is very much alive (in 1996). 18062# (ps300: changed ":pt@:" to "it@" -- esr) 18063# 18064ps300|Picture System 300, 18065 xt, 18066 it@, 18067 rmso@, rmul@, smso@, smul@, use=vt100, 18068 18069#### General Electric (ge) 18070# 18071 18072terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200, 18073 OTbs, hc, os, 18074 cols#120, 18075 bel=^G, cr=^M, cud1=^J, ind=^J, 18076 18077#### Heathkit/Zenith 18078# 18079 18080# Here is a description of the H19 DIP switches: 18081# 18082# S401 18083# 0-3 = baud rate as follows: 18084# 18085# 3 2 1 0 18086# --- --- --- --- 18087# 0 0 1 1 300 baud 18088# 0 1 0 1 1200 baud 18089# 1 0 0 0 2400 baud 18090# 1 0 1 0 4800 baud 18091# 1 1 0 0 9600 baud 18092# 1 1 0 1 19.2K baud 18093# 18094# 4 = parity (0 = no parity) 18095# 5 = even parity (0 = odd parity) 18096# 6 = stick parity (0 = normal parity) 18097# 7 = full duplex (0 = half duplex) 18098# 18099# S402 18100# 0 = block cursor (0 = underscore cursor) 18101# 1 = no key click (0 = keyclick) 18102# 2 = wrap at end of line (0 = no wrap) 18103# 3 = auto LF on CR (0 = no LF on CR) 18104# 4 = auto CR on LF (0 = no CR on LF) 18105# 5 = ANSI mode (0 = VT52 mode) 18106# 6 = keypad shifted (0 = keypad unshifted) 18107# 7 = 50Hz refresh (1 = 60Hz refresh) 18108# 18109# Factory Default settings are as follows: 18110# 7 6 5 4 3 2 1 0 18111# S401 1 0 0 0 1 1 0 0 18112# S402 0 0 0 0 0 0 0 0 18113# (h19: I added <rmam>/<smam> based on the init string; 18114# also added empty <acsc> to suppress a tic warning -- esr) 18115h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode, 18116 OTbs, am, mir, msgr, 18117 cols#80, it#8, lines#24, 18118 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H, 18119 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH, 18120 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>, 18121 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J, 18122 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h, 18123 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A, 18124 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, 18125 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white, 18126 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m, 18127 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m, 18128h19-bs|heathkit w/keypad shifted, 18129 rmkx=\Eu, smkx=\Et, use=h19-b, 18130h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor, 18131 rmkx=\Eu, smkx=\Et, use=h19-u, 18132# (h19: merged in <ip> from BSDI hp19-e entry>; 18133# also added empty <acsc> to suppress a tic warning --esr) 18134# From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998 18135# Tim tells us that: 18136# I have an old Zenith-19 terminal at home that still gets a lot of use. 18137# This terminal suffers from the same famous insert-mode padding lossage 18138# that has been acknowledged for the Z29 terminal. Emacs is nearly 18139# unusable on this box, since even a half-scroll up or down the window 18140# causes flaming terminal death. 18141# 18142# On the Z19, the only way I have found around this problem is to remove 18143# the :al: and :dl: entries entirely. No amount of extra padding will 18144# help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$> 18145# makes Emacs a little slower, but it remains in the land of the living. 18146# Big win. 18147h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19, 18148 OTbs, am, eslok, hs, mir, msgr, 18149 cols#80, it#8, lines#24, 18150 acsc=, bel=^G, clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, 18151 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 18152 cvvis=\Ex4, dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, 18153 ht=^I, ind=^J, ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, 18154 kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, 18155 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, 18156 lf7=red, lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, 18157 smacs=\EF, smir=\E@, smso=\Ep, 18158 tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo, 18159h19-u|heathkit with underscore cursor, 18160 cnorm@, cvvis@, use=h19-b, 18161h19-g|h19g|heathkit w/block cursor, 18162 cnorm=\Ex4, use=h19-b, 18163alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19, 18164 lines#60, 18165 dl1=\EM, il1=\EL, use=h19, 18166 18167# The major problem with the Z29 is that it requires more padding than the Z19. 18168# 18169# The problem with declaring an H19 to be synonymous with a Z29 is that 18170# it needs more padding. It especially loses if a program attempts 18171# to put the Z29 into insert mode and insert text at 9600 baud. It 18172# even loses worse if the program attempts to insert tabs at 9600 18173# baud. Adding padding to text that is inserted loses because in 18174# order to make the Z29 not die, one must add so much padding that 18175# whenever the program tries to use insert mode, the effective 18176# rate is about 110 baud. 18177# 18178# What program would want to put the terminal into insert mode 18179# and shove stuff at it at 9600 baud you ask? 18180# 18181# Emacs. Emacs seems to want to do the mathematically optimal 18182# thing in doing a redisplay rather than the practical thing. 18183# When it is about to output a line on top of a line that is 18184# already on the screen, instead of just killing to the end of 18185# the line and outputting the new line, it compares the old line 18186# and the new line and if there are any similarities, it 18187# constructs the new line by deleting the text on the old line 18188# on the terminal that is already there and then inserting new 18189# text into the line to transform it into the new line that is 18190# to be displayed. The Z29 does not react kindly to this. 18191# 18192# But don't cry for too long.... There is a solution. You can make 18193# a termcap entry for the Z29 that says the Z29 has no insert mode. 18194# Then Emacs cannot use it. "Oh, no, but now inserting into a 18195# line will be really slow", you say. Well there is a sort of a 18196# solution to that too. There is an insert character option on 18197# the Z29 that will insert one character. Unfortunately, it 18198# involves putting the terminal into ansi mode, inserting the 18199# character, and changing it back to H19 mode. All this takes 12 18200# characters. Pretty expensive to insert one character, but it 18201# works. Either Emacs doesn't try to use its inserting hack when 18202# it's only given an insert character ability or the Z29 doesn't 18203# require padding with this (the former is probably more likely, 18204# but I haven't checked it out). 18205# (z29: added empty <acsc> to suppress a tic warning, merged in 18206# status line capabilities from BRL entry --esr) 18207z29|zenith29|z29b|zenith z29b, 18208 OTbs, OTpt, am, eslok, hs, mir, msgr, 18209 OTkn#10, cols#80, lines#24, 18210 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4, 18211 cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 18212 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A, 18213 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1, 18214 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I, 18215 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>, 18216 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 18217 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, 18218 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, 18219 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq, 18220 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8, 18221 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo, 18222# z29 in ansi mode. Assumes that the cursor is in the correct state, and that 18223# the world is stable. <rs1> causes the terminal to be reset to the state 18224# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore 18225# cursor, bc -> block cursor. 18226# From: Mike Meyers 18227# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts> 18228# looks vt100-compatible -- esr) 18229z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode, 18230 OTbs, OTpt, am, eslok, hs, mir, msgr, 18231 OTkn#10, cols#80, it#8, lines#24, 18232 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J, 18233 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 18234 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 18235 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 18236 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM, 18237 dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H, 18238 ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL, 18239 ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB, 18240 kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS, 18241 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ, 18242 kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7, 18243 nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h, 18244 rmso=\E[m, rmul=\E[m, 18245 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m, 18246 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m, 18247 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K, 18248z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor, 18249 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m, 18250 use=z29a, 18251z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick, 18252 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m, 18253 use=z29a, 18254z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick, 18255 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m, 18256 use=z29a, 18257# From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995 18258z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode, 18259 am, eslok, hs, mc5i, mir, msgr, xon, 18260 cols#80, lines#24, 18261 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 18262 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h, 18263 clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M, 18264 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 18265 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 18266 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 18267 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM, 18268 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K, 18269 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L, 18270 ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw, 18271 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, 18272 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS, 18273 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ, 18274 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H, 18275 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m, 18276 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m, 18277 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0, 18278 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 18279 tsl=\E[s\E[>1h\E[25;%i%p1%dH, 18280 18281# From: Brad Brahms <Brahms@USC-ECLC> 18282z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor, 18283 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw, 18284# (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr) 18285z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc, 18286 OTbs, OTpt, mir, msgr, 18287 OTkn#10, cols#80, it#8, lines#24, 18288 acsc=, clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, 18289 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, 18290 cuu1=\EA, cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, 18291 ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, 18292 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, 18293 kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, 18294 kf9=\EOI, khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, 18295 smacs=\EF, smir=\E@, smso=\Ep, 18296p19|h19-b with il1/dl1, 18297 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b, 18298# From: <ucscc!B.fiatlux@ucbvax.berkeley.edu> 18299# (ztx: removed duplicate :sr: -- esr) 18300ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11, 18301 OTbs, am, eslok, hs, 18302 cols#80, it#8, lines#24, 18303 clear=\EE, cub1=^H, cud1=^J, cuf1=\EC, 18304 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, 18305 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, 18306 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>, 18307 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES, 18308 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER, 18309 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2, 18310 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo, 18311 18312#### IMS International (ims) 18313# 18314# There was a company called IMS International located in Carson City, 18315# Nevada, that flourished from the mid-70s to mid-80s. They made S-100 18316# bus/Z80 hardware and a line of terminals called Ultimas. 18317# 18318 18319# From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985 18320ims950-b|bare ims950 no init string, 18321 is2@, use=ims950, 18322# (ims950: removed obsolete ":ko@:" -- esr) 18323ims950|ims televideo 950 emulation, 18324 xenl@, 18325 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@, 18326 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950, 18327# (ims950-rv: removed obsolete ":ko@:" -- esr) 18328ims950-rv|ims tvi950 rev video, 18329 xenl@, 18330 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@, 18331 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv, 18332ims-ansi|ultima2|ultimaII|IMS Ultima II, 18333 OTbs, am, 18334 cols#80, it#8, lines#24, 18335 clear=\E[H\E[2J, cub1=^H, cud1=\ED, 18336 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K, 18337 ht=^I, if=/usr/share/tabset/vt100, 18338 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D, 18339 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM, 18340 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m, 18341 smul=\E[4m, 18342 18343#### Intertec Data Systems 18344# 18345# I think this company is long dead as of 1995. They made an early CP/M 18346# micro called the "Intertec Superbrain" that was moderately popular, 18347# then sank out of sight. 18348# 18349 18350superbrain|intertec superbrain, 18351 OTbs, am, bw, 18352 cols#80, lines#24, 18353 OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J, 18354 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K, 18355 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U, 18356 kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L, 18357# (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>, 18358# rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM, 18359# and the reverse is actually true. Try it. -- esr) 18360intertube|intertec|Intertec InterTube, 18361 OTbs, am, 18362 cols#80, lines#25, 18363 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 18364 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A, 18365 ind=^J, rmso=\E0@, smso=\E0P, 18366# The intertube 2 has the "full duplex" problem like the tek 4025: if you 18367# are typing and a command comes in, the keystrokes you type get interspersed 18368# with the command and it messes up 18369intertube2|intertec data systems intertube 2, 18370 OTbs, 18371 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c, 18372 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, 18373 ll=^K^X\r, vpa=\013%p1%c, use=intertube, 18374 18375#### Ithaca Intersystems 18376# 18377# This company made S100-bus personal computers long ago in the pre-IBM-PC 18378# past. They used to be reachable at: 18379# 18380# Ithaca Intersystems 18381# 1650 Hanshaw Road 18382# Ithaca, New York 14850 18383# 18384# However, the outfit went bankrupt years ago. 18385# 18386 18387# The Graphos III was a color graphics terminal from Ithaca Intersystems. 18388# These entries were written (originally in termcap syntax) by Brian Yandell 18389# <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the 18390# University of Wisconsin. 18391 18392# (graphos: removed obsolete and syntactically incorrect :kn=4:, 18393# removed <if=/usr/share/tabset/init.graphos> and 18394# <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr) 18395graphos|graphos III, 18396 am, mir, 18397 cols#80, it#8, lines#24, 18398 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z, 18399 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 18400 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 18401 cuu=\E[%p1%dA, cuu1=\E[A, 18402 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM, 18403 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, 18404 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, 18405 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 18406 kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l, 18407 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h, 18408 smir=\E[4h, smso=\E[7m, 18409graphos-30|graphos III with 30 lines, 18410 lines#30, 18411 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos, 18412 18413#### Modgraph 18414# 18415# These people used to be reachable at: 18416# 18417# Modgraph, Inc 18418# 1393 Main Street, 18419# Waltham, MA 02154 18420# Vox: (617)-890-5796. 18421# 18422# However, if you call that number today you'll get an insurance company. 18423# I have mail from "Michael Berman, V.P. Sales, Modgraph" dated 18424# 26 Feb 1997 that says: 18425# 18426# Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been 18427# for ~7 years. Modgraph still in business. Products are rugged laptop and 18428# portable PC's and specialized CRT and LCD monitors (rugged, rack-mount 18429# panel-mount etc). I can be emailed at sonfour@aol.com 18430# 18431# Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was 18432# dated 1984. According to the manual, it featured Tek 4010/4014 18433# graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard. 18434# 18435 18436modgraph|mod24|modgraph terminal emulating vt100, 18437 xenl@, 18438 cols#80, lines#24, 18439 cvvis=\E\^9;0s\E\^7;1s, 18440 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s, 18441 rf@, ri=\EM\E[K$<5/>, use=vt100, 18442# The GX-1000 manual is dated 1984. This looks rather like a VT-52. 18443modgraph2|modgraph gx-1000 80x24 with keypad not enabled, 18444 am, da, db, 18445 cols#80, it#8, lines#24, 18446 clear=\EH\EJ$<50/>, cub1=^H, cuf1=\EC$<2/>, 18447 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, cuu1=\EA$<2/>, 18448 ed=\EJ$<50/>, el=\EK$<3/>, ht=^I, 18449 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1, 18450 ri=\EI$<5/>, 18451# 18452# Modgraph from Nancy L. Cider <nancyc@brl-tbd> 18453# BUG NOTE from Barbara E. Ringers <barb@brl-tbd>: 18454# If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a 18455# mark and using delete-to-killbuffer work correctly. However, we would 18456# like normal mode of operation to be using a Modgraph with 48 line setting. 18457# If we set TERM=mod (which is a valid entry in termcap with 48 lines) 18458# the setting mark and delete-to-killbuffer results in the deletion of only 18459# the line the mark is set on. 18460# We've discovered that the delete-to-killbuffer works correctly 18461# with TERM=mod and screen set to 80x48 but it's not obvious. Only 18462# the first line disappears but a ctrl-l shows that it did work 18463# correctly. 18464modgraph48|mod|Modgraph w/48 lines, 18465 OTbs, OTpt, am, xenl, 18466 cols#80, it#8, lines#48, vt#3, 18467 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, 18468 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 18469 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 18470 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q, 18471 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h, 18472 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 18473 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, 18474 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 18475 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, 18476 smso=\E[7m, smul=\E[4m, 18477 18478#### Morrow Designs 18479# 18480# This was George Morrow's company. They started in the late 1970s making 18481# S100-bus machines. They used to be reachable at: 18482# 18483# Morrow 18484# 600 McCormick St. 18485# San Leandro, CA 94577 18486# 18487# but they're long gone now (1995). 18488# 18489 18490# The mt70 terminal was shipped with the Morrow MD-3 microcomputer. 18491# Jeff's specimen was dated June 1984. 18492# From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995 18493mt70|mt-70|Morrow MD-70; native Morrow mode, 18494 am, mir, msgr, xon, 18495 cols#80, it#8, lines#24, 18496 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G, 18497 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H, 18498 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>, 18499 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>, 18500 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE, 18501 ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r, 18502 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r, 18503 kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r, 18504 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r, 18505 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r, 18506 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 18507 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_, 18508 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E], 18509 smul=\EG1, tbc=\E0, use=adm+sgr, 18510 18511#### Motorola 18512# 18513 18514# Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL 18515# (Seth H Zirin) 18516ex155|Motorola Exorterm 155, 18517 OTbs, am, bw, 18518 OTkn#5, OTug#1, cols#80, lines#24, 18519 cbt=\E[, clear=\EX, cud1=\EB, cuf1=\ED, 18520 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, ed=\ET, el=\EU, 18521 home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H, 18522 kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@, 18523 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED, 18524 18525#### Omron 18526# 18527# This company is still around in 1995, manufacturing point-of-sale systems. 18528 18529omron|Omron 8025AG, 18530 OTbs, am, da, db, 18531 cols#80, lines#24, 18532 bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA, 18533 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH, 18534 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef, 18535 18536#### Ramtek 18537# 18538# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they 18539# were competition for things like the Tektronics 4025. 18540# 18541 18542# Ramtek 6221 from BRL, probably by Doug Gwyn 18543# The following SET-UP modes are assumed for normal operation: 18544# UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON 18545# NEWLINE_OFF 80_COLUMNS 18546# Other SET-UP modes may be set for operator convenience or communication 18547# requirements; I recommend 18548# SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON 18549# Hardware tabs are assumed to be every 8 columns; they can be set up by the 18550# "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this). 18551# Note that the Control-E key is useless on this brain-damaged terminal. No 18552# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 18553rt6221|Ramtek 6221 80x24, 18554 OTbs, OTpt, msgr, xon, 18555 OTkn#4, cols#80, it#8, lines#24, vt#3, 18556 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l, 18557 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M, 18558 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 18559 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C, 18560 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 18561 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I, 18562 hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B, 18563 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR, 18564 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H, 18565 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>, 18566 rmso=\E[m, rmul=\E[m, 18567 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>, 18568 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m, 18569 smul=\E[4m, tbc=\E[3g, 18570# [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)]. 18571rt6221-w|Ramtek 6221 160x48, 18572 cols#160, lines#48, 18573 ll=\E[48;1H, use=rt6221, 18574 18575#### RCA 18576# 18577 18578# RCA VP3301 or VP3501 18579rca|rca vp3301/vp3501, 18580 OTbs, 18581 cols#40, lines#24, 18582 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 18583 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1, 18584 18585 18586#### Selanar 18587# 18588 18589# Selanar HiREZ-100 from BRL, probably by Doug Gwyn 18590# The following SET-UP modes are assumed for normal operation: 18591# SET_DEFAULT_TABS 48_LINES 80_COLUMNS 18592# ONLINE ANSI CURSOR_VISIBLE 18593# VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF 18594# LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED 18595# CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN 18596# For use with graphics software, all graphics modes should be set to factory 18597# default. Other SET-UP modes may be set for operator convenience or 18598# communication requirements. No delays are specified; use "stty ixon -ixany" 18599# to enable DC3/DC1 flow control! 18600# I commented out the scrolling capabilities since they are too slow. 18601hirez100|Selanar HiREZ-100, 18602 OTbs, OTpt, mir, msgr, xon, 18603 OTkn#4, cols#80, it#8, lines#48, vt#3, 18604 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, 18605 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 18606 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 18607 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, 18608 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 18609 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H, 18610 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, 18611 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, 18612 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i, 18613 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O, 18614 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 18615 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>, 18616 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m, 18617 smul=\E[4m, tbc=\E[3g, 18618hirez100-w|Selanar HiREZ-100 in 132-column mode, 18619 cols#132, use=hirez100, 18620 18621#### Signetics 18622# 18623 18624# From University of Wisconsin 18625vsc|Signetics Vsc Video driver by RMC, 18626 am, msgr, 18627 cols#80, it#8, lines#26, 18628 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 18629 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 18630 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s, 18631 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_", 18632 18633#### Soroc 18634# 18635# Alan Frisbie <frisbie@flying-disk.com> writes: 18636# 18637# As you may recall, the Soroc logo consisted of their name, 18638# with the letter "S" superimposed over an odd design. This 18639# consisted of a circle with a slightly smaller 15 degree (approx.) 18640# wedge with rounded corners inside it. The color was sort of 18641# a metallic gold/yellow. 18642# 18643# If I had been more of a beer drinker it might have been obvious 18644# to me, but it took a clue from their service department to make 18645# me exclaim, "Of course!" The circular object was the top of 18646# a beer can (the old removable pop-top style) and "Soroc" was an 18647# anagram for "Coors". 18648# 18649# I can just imagine the founders of the company sitting around 18650# one evening, tossing back a few and trying to decide what to 18651# call their new company and what to use for a logo. 18652# 18653 18654# (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr) 18655soroc120|iq120|soroc|soroc iq120, 18656 clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J, 18657 kcuf1=^L, kcuu1=^K, use=adm3a, 18658soroc140|iq140|soroc iq140, 18659 OTbs, am, mir, 18660 cols#80, lines#24, 18661 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 18662 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew, 18663 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J, 18664 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r, 18665 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 18666 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, 18667 rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A, 18668 18669#### Southwest Technical Products 18670# 18671# These guys made an early personal micro called the M6800. 18672# The ct82 was probably its console terminal. 18673# 18674 18675# (swtp: removed obsolete ":bc=^D:" -- esr) 18676swtp|ct82|southwest technical products ct82, 18677 am, 18678 cols#82, lines#20, 18679 bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S, 18680 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F, 18681 home=^P, ich1=^\^X, il1=^\^Y, ind=^N, 18682 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011, 18683 ll=^C, ri=^O, rmso=^^^F, smso=^^^V, 18684 18685#### Synertek 18686# 18687# Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995): 18688# 18689# Synertek used to make ICs, various 6502-based single-board process 18690# control and hobbyist computers, and assorted peripherals including a 18691# series of small inexpensive terminals (I think they were one of the 18692# first to have a "terminal-on-a-keyboard", where the terminal itself 18693# was only slightly larger than the keyboard). 18694# 18695# They apparently had a KTM-1 model, which I've never seen. The KTM-2/40 18696# was a 40x24 terminal that could connect to a standard TV through a 18697# video modulator. The KTM-2/80 was the 80-column version (the 2/40 18698# could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM). 18699# I have a KTM-2/80 still in working order. The KTM-2s had fully 18700# socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program 18701# ROM and 2 ROMs as character generators. They were incredibly simple, 18702# and I've never had any problems with mine (witness the fact that mine 18703# was made in 1981 and is still working great... I've blown the video 18704# output transistor a couple of times, but it's a 2N2222 :-) 18705# 18706# The KTM-3 (which is what is listed in the terminfo file) was their 18707# attempt at putting a KTM-2 in a box (and some models came with a 18708# CRT). It wasn't much different from the KTM-2 hardware-wise, but the 18709# control and escape sequences are very different. The KTM-3 was always 18710# real broken, at least according to the folks I've talked to about it. 18711# 18712# The padding in the entry is probably off--these terminals were very 18713# slow (it takes like 100ms for the KTM-2 to clear the screen...) And 18714# anyone with any sanity replaced the ROMs with something that provided 18715# a reasonable subset of VT100 functionality, since the usual ROMs were 18716# obviously very primitive... oh, you could get an upgraded ROM from 18717# Synertek for some incredible amount of money, but what hacker with an 18718# EPROM burner would do that? :) 18719# 18720# Sorry I don't have any contact info; I believe they were located in 18721# Sunnyvale, and I'm fairly sure they are still manufacturing ICs 18722# (they've gone to ASICs and FPGAs), but I doubt they're in the computer 18723# business these days. 18724# 18725 18726# Tested, seems to work fine with vi. 18727synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal, 18728 am, 18729 cols#80, lines#24, 18730 clear=^Z, cub1=^H, cuf1=^L, 18731 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK, 18732 18733#### Tab Office Products 18734# 18735# TAB Products Co. - Palo Alto, California 18736# Electronic Office Products, 18737# 1451 California Avenue 94304 18738# 18739# I think they're out of business. 18740# 18741 18742# The tab 132 uses xon/xoff, so no padding needed. 18743# <smkx>/<rmkx> have nothing to do with arrow keys. 18744# <is2> sets 80 col mode, normal video, autowrap on (for <am>). 18745# Seems to be no way to get rid of status line. 18746# The manual for this puppy was dated June 1981. It claims to be VT52- 18747# compatible but looks more vt100-like. 18748tab132|tab|tab132-15|tab 132/15, 18749 da, db, 18750 OTdN@, cols#80, lines#24, lm#96, 18751 cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M, 18752 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B, 18753 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100, 18754tab132-w|tab132 in wide mode, 18755 cols#132, 18756 is2=\E[?7h\E[?3h\E[?5l, use=tab132, 18757tab132-rv|tab132 in reverse-video mode, 18758 is2=\E[?7h\E[?3l\E[?5h, use=tab132, 18759tab132-w-rv|tab132 in reverse-video/wide mode, 18760 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w, 18761 18762 18763#### Teleray 18764# 18765# Research Incorporated 18766# 6425 Flying Cloud Drive 18767# Eden Prairie, MN 55344 18768# Vox: (612)-941-3300 18769# 18770# The Teleray terminals were all discontinued in 1992-93. RI still services 18771# and repairs these beasts, but no longer manufactures them. The Teleray 18772# people believe that all the types listed below are very rare now (1995). 18773# There was a newer line of Telerays (Model 7, Model 20, Model 30, and 18774# Model 100) that were ANSI-compatible. 18775# 18776# Note two things called "teleray". Reorder should move the common one 18777# to the front if you have either. A dumb teleray with the cursor stuck 18778# on the bottom and no obvious model number is probably a 3700. 18779# 18780 18781t3700|dumb teleray 3700, 18782 OTbs, 18783 cols#80, lines#24, 18784 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J, 18785t3800|teleray 3800 series, 18786 OTbs, 18787 cols#80, it#8, lines#24, 18788 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 18789 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK, 18790 home=\EH, ht=^I, ind=^J, ll=\EY7\s, 18791t1061|teleray|teleray 1061, 18792 OTbs, am, km, xhp, xt, 18793 cols#80, it#8, lines#24, xmc#1, 18794 bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 18795 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 18796 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF, 18797 ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>, 18798 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef, 18799 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7, 18800 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH, 18801 tbc=\EG, 18802t1061f|teleray 1061 with fast PROMs, 18803 dl1=\EM, il1=\EL, ip@, use=t1061, 18804# "Teleray Arpa Special", officially designated as 18805# "Teleray Arpa network model 10" with "Special feature 720". 18806# This is the new (1981) fast microcode updating the older "arpa" proms 18807# (which gave meta-key and programmable-fxn keys). 720 is much much faster, 18808# converts the keypad to programmable function keys, and has other goodies. 18809# Standout mode is still broken (magic cookie, etc) so is suppressed as no 18810# programs handle such lossage properly. 18811# Note: this is NOT the old termcap's "t1061f with fast proms." 18812# From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah 18813# (t10: removed overridden ":so@:se@:us@:ue@:" -- esr) 18814t10|teleray 10 special, 18815 OTbs, km, xhp, xt, 18816 cols#80, it#8, lines#24, xmc#2, 18817 clear=\Ej$<30/>, cub1=^H, cuf1=\EC, 18818 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 18819 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL, 18820 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD, 18821 smul=\ERH, 18822# teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and 18823# back/forth words. Put the function keys (f1-f10) where they can be 18824# found, and turn off the other magic keys along the top row, except 18825# for line/local. Do the magic appropriate to make the page shifts work. 18826# Also toggle ^S/^Q for those of us who use Emacs. 18827t16|teleray 16, 18828 am, da, db, mir, xhp, xt, 18829 cols#80, lines#24, 18830 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, 18831 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P, 18832 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L, 18833 ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, 18834 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T, 18835 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m, 18836 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h, 18837 smso=\E[7m, smul=\E[4m, 18838 18839#### Texas Instruments (ti) 18840# 18841 18842# The Silent 700 was so called because it was built around a quiet thermal 18843# printer. It was portable, equipped with an acoustic coupler, and pretty 18844# neat for its day. 18845ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800, 18846 OTbs, hc, os, 18847 cols#80, 18848 bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J, 18849 18850# 18851# Texas Instruments 916 VDT 7 bit control mode 18852# 18853ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL, 18854 da, db, in, msgr, 18855 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>, 18856 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB, 18857 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 18858 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM, 18859 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K, 18860 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>, 18861 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>, 18862 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H, 18863 kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~, 18864 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~, 18865 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 18866 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T, 18867 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@, 18868 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, 18869 use=vt220, 18870# 18871# Texas Instruments 916 VDT 8 bit control mode 18872# 18873ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL, 18874 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C, 18875 kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~, 18876 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~, 18877 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~, 18878 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H, 18879 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916, 18880# 18881# Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode 18882# 18883ti916-132|Texas Instruments 916 VDT vt220 132 column, 18884 cols#132, use=ti916, 18885# 18886# Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode 18887# 18888ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column, 18889 cols#132, use=ti916-8, 18890ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL, 18891 OTbs, am, xon, 18892 cols#80, it#8, lines#24, 18893 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 18894 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M, 18895 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 18896 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h, 18897 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 18898 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, 18899 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ, 18900 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~, 18901 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m, 18902 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m, 18903 smul=\E[4m, tbc=\E[3g, 18904ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL, 18905 am, xon, 18906 cols#80, it#8, lines#24, 18907 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 18908 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M, 18909 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 18910 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h, 18911 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 18912 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, 18913 kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>, 18914 kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>, 18915 kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>, 18916 kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM, 18917 rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m, 18918 smul=\E[4m, tbc=\E[3g, 18919ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode, 18920 cols#132, use=ti924, 18921ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode, 18922 cols#132, use=ti924-8, 18923ti931|Texas Instruments 931 VDT, 18924 OTbs, am, xon, 18925 cols#80, lines#24, 18926 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED, 18927 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 18928 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, 18929 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H, 18930 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC, 18931 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3, 18932 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9, 18933 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@, 18934 sgr0=\E4@, smso=\E4A, smul=\E4D, 18935ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL, 18936 csr@, ind=\E[1S, ri=\E[1T, use=ti924, 18937# (ti926-8: I corrected this from the broken SCO entry -- esr) 18938ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL, 18939 csr@, ind=\2331S, ri=\2331T, use=ti924-8, 18940ti_ansi|basic entry for ti928, 18941 am, bce, eo, xenl, xon, 18942 colors#8, cols#80, it#8, lines#25, pairs#64, 18943 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H, 18944 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, 18945 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, 18946 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, 18947 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B, 18948 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M, 18949 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, 18950 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I, 18951 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m, 18952 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m, 18953 smso=\E[7m, smul=\E[4m, 18954# 18955# 928 VDT 7 bit control mode 18956# 18957ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL, 18958 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~, 18959 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, 18960 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, 18961 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, 18962 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi, 18963# 18964# 928 VDT 8 bit control mode 18965# 18966ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL, 18967 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~, 18968 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~, 18969 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~, 18970 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~, 18971 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S, 18972 kpp=\233T, kprt=\23335~, use=ti_ansi, 18973 18974#### Zentec (zen) 18975# 18976 18977# (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally 18978# had just <smso>=\EG6 which I think means standout was supposed to be 18979# dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and 18980# <invis> might work-- esr) 18981zen30|z30|zentec 30, 18982 OTbs, am, mir, ul, 18983 cols#80, lines#24, 18984 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 18985 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 18986 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^, 18987 il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6, 18988 smul@, use=adm+sgr, 18989# (zen50: this had extension capabilities 18990# :BS=^U:CL=^V:CR=^B: 18991# UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh, 18992# which were also in the original entry -- esr) 18993# (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr) 18994zen50|z50|zentec zephyr, 18995 OTbs, am, 18996 cols#80, lines#24, xmc#1, 18997 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 18998 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE, 18999 invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 19000 rmul@, smul@, use=adm+sgr, 19001 19002# CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL 19003cci|cci1|z8001|zen8001|CCI Custom Zentec 8001, 19004 OTbs, am, bw, 19005 cols#80, lines#24, 19006 blink=\EM", clear=\EH\EJ, cnorm=\EP, 19007 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J, 19008 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 19009 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH, 19010 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED, 19011 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R, 19012 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s, 19013 smso=\EM$, smul=\EM0, 19014 19015######## OBSOLETE UNIX CONSOLES 19016# 19017 19018#### Apollo consoles 19019# 19020# Apollo got bought by Hewlett-Packard. The Apollo workstations are 19021# labeled HP700s now. 19022# 19023 19024# From: Gary Darland <goodmanc@garnet.berkeley.edu> 19025apollo|apollo console, 19026 OTbs, am, mir, 19027 cols#88, lines#53, 19028 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC, 19029 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL, 19030 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED, 19031 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ, 19032 smso=\ES, smul=\EU, vpa=\EO+\s, 19033 19034# We don't know whether or not the apollo guys replicated DEC's firmware bug 19035# in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable 19036# both these capabilities. 19037apollo_15P|apollo 15 inch display, 19038 rmir@, smir@, use=vt132, 19039apollo_19L|apollo 19 inch display, 19040 rmir@, smir@, use=vt132, 19041apollo_color|apollo color display, 19042 rmir@, smir@, use=vt132, 19043 19044#### Convergent Technology 19045# 19046# Burroughs bought Convergent shortly before it merged with Univac. 19047# CTOS is (I believe) dead. Probably the aws is too (this entry dates 19048# from 1991 or earlier). 19049# 19050 19051# Convergent AWS workstation from Gould/SEL UTX/32 via BRL 19052# (aws: removed unknown :dn=^K: -- esr) 19053aws|Convergent Technologies AWS workstation under UTX and Xenix, 19054 am, 19055 OTug#0, cols#80, lines#28, xmc#0, 19056 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=, 19057 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, 19058 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c, 19059 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K, 19060 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF, 19061 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN, 19062 vpa=\EV%p1%c, 19063awsc|Convergent Technologies AWS workstation under CTOS, 19064 am, 19065 OTug#0, cols#80, lines#24, xmc#0, 19066 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L, 19067 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF, 19068 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A, 19069 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE, 19070 smul=\EAC, 19071 19072#### DEC consoles 19073# 19074 19075# The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes: 19076# The digital uVax II's had a graphic display called a qdss. It was 19077# supposed to be a high performance graphic accelerator, but it was 19078# late to market and barely appeared before faster dumb frame buffers 19079# appeared. I have only used this display while running X11. However, 19080# during bootup, it was in text mode, and probably had a terminal emulator 19081# within it. And that is what your termcap entry is for. In graphics 19082# mode the screen size is 1024x864 pixels. 19083qdss|qdcons|qdss glass tty, 19084 OTbs, am, 19085 cols#128, lines#57, 19086 clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L, 19087 cup=\E=%p1%c%p2%c, cuu1=^K, 19088 19089#### Fortune Systems consoles 19090# 19091# Fortune made a line of 68K-based UNIX boxes that were pretty nifty 19092# in their day; I (esr) used one myself for a year or so around 1984. 19093# They had no graphics, though, and couldn't compete against Suns and 19094# the like. R.I.P. 19095# 19096 19097# From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983 19098# (This had extension capabilities 19099# :rv=\EH:re=\EI:rg=0:GG=0:\ 19100# :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\ 19101# :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\ 19102# :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F: 19103# It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had 19104# ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily) 19105# to force both magic cookie glitches off. Once upon a time, I 19106# used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are 19107# function keys; thus the "Al" value for HM was certainly an error. I renamed 19108# EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC. 19109# I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent 19110# "reverse-video-glitch" capability; I have put :rv: and :re: in with standard 19111# names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr) 19112fos|fortune|Fortune system, 19113 OTbs, am, bw, 19114 cols#80, lines#25, 19115 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E], 19116 clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>, 19117 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>, 19118 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>, 19119 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z, 19120 ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H, 19121 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r, 19122 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r, 19123 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r, 19124 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH, 19125 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo, 19126 smso=^\H`, smul=^\HP, 19127 19128#### Masscomp consoles 19129# 19130# Masscomp has gone out of business. Their product line was purchased by 19131# comany in Georgia (US) called "XS International", parts and service may 19132# still be available through them. 19133# 19134 19135# (masscomp: ":MT:" changed to ":km:"; -- esr) 19136masscomp|masscomp workstation console, 19137 OTbs, km, mir, 19138 cols#80, it#8, lines#24, 19139 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, 19140 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 19141 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H, 19142 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l, 19143 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu, 19144masscomp1|masscomp large screen version 1, 19145 cols#104, lines#36, use=masscomp, 19146masscomp2|masscomp large screen version 2, 19147 cols#64, lines#21, use=masscomp, 19148 19149######## OTHER OBSOLETE TYPES 19150# 19151# These terminals are *long* dead -- these entries are retained for 19152# historical interest only. 19153# 19154 19155#### Obsolete non-ANSI software emulations 19156# 19157 19158# CTRM terminal emulator 19159# 1. underlining is not allowed with colors: first, is is simulated by 19160# black on white, second, it disables background color manipulations. 19161# 2. BLINKING, REVERSE and BOLD are allowed with colors, 19162# so we have to save their status in the static registers A, B and H 19163# respectively, to be able to restore them when color changes 19164# (because any color change turns off ALL attributes) 19165# 3. <bold> and <rev> sequences alternate modes, 19166# rather than simply entering them. Thus we have to check the 19167# static register B and H to determine the status, before sending the 19168# escape sequence. 19169# 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero 19170# and then reset colors 19171# 5. implementation of the protect mode would badly penalize the performance. 19172# we would have to use \E&bn sequence to turn off colors (as well as all 19173# other attributes), and keep the status of protect mode in yet another 19174# static variable. If someone really needs this mode, they would have to 19175# create another terminfo entry. 19176# 6. original color-pair is white on black. 19177# store the information about colors into static registers 19178# 7. set foreground color. it performs the following steps. 19179# 1) turn off all attributes 19180# 2) turn on the background and video attributes that have been turned 19181# on before (this information is stored in static registers X,Y,Z,A,B,H,D). 19182# 3) turn on foreground attributes 19183# 4) store information about foreground into U,V,W static registers 19184# 8. turn on background: similar to turn on foreground above 19185ctrm|C terminal emulator, 19186 am, bce, xon, 19187 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0, 19188 pairs#63, pb#19200, vt#6, 19189 bel=^G, blink=\E&dA%{1}%PA, 19190 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei, 19191 clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 19192 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM, 19193 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1, 19194 il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r, 19195 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r, 19196 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, 19197 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r, 19198 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU, 19199 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA, 19200 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX, 19201 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU, 19202 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;, 19203 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB, 19204 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 19205 19206# gs6300 - can't use blue foreground, it clashes with underline; 19207# it's simulated with cyan 19208# Bug: The <op> capability probably resets attributes. 19209# (gs6300: commented out <rmln> (no <smln>) --esr) 19210gs6300|emots|AT&T PC6300 with EMOTS terminal emulator, 19211 am, bce, msgr, xon, 19212 colors#8, cols#80, it#8, lines#24, pairs#63, 19213 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 19214 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 19215 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 19216 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 19217 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 19218 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 19219 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 19220 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B, 19221 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s, 19222 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s, 19223 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m, 19224 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm, 19225 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m, 19226 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m, 19227 19228# From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT 19229# MS-Kermit with Heath-19 emulation mode enabled 19230# (h19k: changed ":pt@:" to ":it@" 19231h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin), 19232 am@, da, db, xt, 19233 it@, 19234 ht@, use=h19-u, 19235 19236# Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy 19237# Software (formerly Peripherals Computers & Supplies, Inc) of 19238# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can 19239# also be reached at support@synergy.com. 19240versaterm|versaterm vt100 emulator for the macintosh, 19241 am, xenl, 19242 cols#80, it#8, lines#24, 19243 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 19244 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 19245 cub1=^H, cud1=^J, cuf1=\E[C$<2/>, 19246 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, 19247 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>, 19248 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>, 19249 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, 19250 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, 19251 kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, 19252 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, 19253 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>, 19254 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>, 19255 smul=\E[4m$<2/>, 19256 19257# From: Rick Thomas <ihnp4!btlunix!rbt> 19258# (xtalk: I added <rmam>/<smam> based on the init string. 19259xtalk|IBM PC with xtalk communication program (versions up to 3.4), 19260 am, mir, msgr, xon, 19261 cols#80, it#8, lines#24, vt#3, xmc#1, 19262 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 19263 bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H, 19264 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>, 19265 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 19266 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>, 19267 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, 19268 il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, 19269 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 19270 rmkx=\E[?1l\E>, rmso=\E[m\s, 19271 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m, 19272 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s, 19273 tbc=\E[3g, use=vt100+fnkeys, 19274 19275# The official PC terminal emulator program of the AT&T Product Centers. 19276# Note - insert mode commented out - doesn't seem to work on AT&T PC. 19277simterm|attpc running simterm, 19278 am, 19279 cols#80, lines#24, 19280 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 19281 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER, 19282 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE, 19283 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB, 19284 19285#### Daisy wheel printers 19286# 19287# This section collects Diablo, DTC, Xerox, Qume, and other daisy 19288# wheel terminals. These are now largely obsolete. 19289# 19290 19291# (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr) 19292diablo1620|diablo1720|diablo450|ipsi|diablo 1620, 19293 hc, os, 19294 cols#132, it#8, 19295 cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c, 19296 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2, 19297diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin, 19298 cols#124, 19299 is2=\r \E9, use=diablo1620, 19300# (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr) 19301diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640, 19302 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, 19303 use=diablo1620, 19304# (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such 19305# file -- esr) 19306diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin, 19307 cols#124, 19308 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620, 19309diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer, 19310 use=diablo1640-lm, 19311# DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout 19312# <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>. 19313# The terminal has tabs, but I'm getting tired of fighting the braindamage. 19314# If no tab is set or the terminal's in a bad mood, it glitches the screen 19315# around all of memory. Note that return puts a blank ("a return character") 19316# in the space the cursor was at, so we use ^P return (and thus ^P newline for 19317# newline). Note also that if you turn off :pt: and let Unix expand tabs, 19318# curses won't work (some old BSD versions) because it doesn't clear this bit, 19319# and cursor addressing sends a tab for row/column 9. What a losing terminal! 19320# I have been unable to get tabs set in all 96 lines - it always leaves at 19321# least one line with no tabs in it, and once you tab through that line, 19322# it completely weirds out. 19323# (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr) 19324dtc382|DTC 382, 19325 am, da, db, xhp, 19326 cols#80, lines#24, lm#96, 19327 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H, 19328 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB, 19329 dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U, 19330 home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi, 19331 rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P, 19332dtc300s|DTC 300s, 19333 hc, os, 19334 cols#132, 19335 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I, 19336 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3, 19337gsi|mystery gsi terminal, 19338 hc, os, 19339 cols#132, 19340 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH, 19341 ind=^J, 19342aj830|aj832|aj|anderson jacobson, 19343 hc, os, 19344 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8, 19345 ind=^J, 19346# From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST 19347aj510|Anderson-Jacobson model 510, 19348 am, mir, 19349 cols#80, lines#24, 19350 clear=^L, cub1=^H, cuf1=\EX, 19351 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY, 19352 dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=, 19353 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ, 19354 kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J, 19355 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I, 19356 smul=\E"U, 19357# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981 19358# This is incomplete, but it's a start. 19359nec5520|nec|spinwriter|nec 5520, 19360 hc, os, 19361 cols#132, it#8, 19362 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L, 19363 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J, 19364 kbs=^H, tbc=\E3, 19365qume5|qume|Qume Sprint 5, 19366 hc, os, 19367 cols#80, it#8, 19368 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I, 19369 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3, 19370# I suspect the xerox 1720 is the same as the diablo 1620. 19371xerox1720|x1720|x1750|xerox 1720, 19372 hc, os, 19373 cols#132, it#8, 19374 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J, 19375 tbc=\E2, 19376 19377#### Miscellaneous obsolete terminals, manufacturers unknown 19378# 19379# If you have any information about these (like, a manufacturer's name, 19380# and a date on the serial-number plate) please send it! 19381 19382cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars, 19383 OTbs, am, 19384 cols#73, lines#36, 19385 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, 19386cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars, 19387 OTbs, am, 19388 cols#85, lines#39, 19389 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3, 19390 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7, 19391 kf4=\E8, rmso=\Em^C, smso=\Em^L, 19392cops10|cops|cops-10|cops 10, 19393 am, bw, 19394 cols#80, lines#24, 19395 bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 19396 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V, 19397 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 19398 khome=^Y, 19399# (d132: removed duplicate :ic=\E5:, 19400# merged in capabilities from a BRL entry -- esr) 19401d132|datagraphix|datagraphix 132a, 19402 da, db, in, 19403 cols#80, lines#30, 19404 bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J, 19405 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex, 19406 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H, 19407 kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew, 19408# The d800 was an early portable terminal from c.1984-85 that looked a lot 19409# like the original Compaq `lunchbox' portable (but no handle). It had a vt220 19410# mode (which is what this entry looks like) and several other lesser-known 19411# emulations. 19412d800|Direct 800/A, 19413 OTbs, am, da, db, msgr, xhp, 19414 cols#80, it#8, lines#24, 19415 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, 19416 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H, 19417 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 19418 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D, 19419 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, 19420 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 19421 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 19422 smacs=\E[1m, smso=\E[7m, smul=\E[4m, 19423digilog|digilog 333, 19424 OTbs, 19425 cols#80, lines#16, 19426 bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X, 19427 home=^N, ind=^J, 19428# The DWK was a terminal manufactured in the Soviet Union c.1986 19429dwk|dwk-vt|dwk terminal, 19430 am, 19431 cols#80, it#8, lines#24, 19432 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_, 19433 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 19434 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, 19435 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177, 19436 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee, 19437 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5, 19438 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh, 19439 kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX, 19440 sgr0=\EX, smacs=\EF, smso=\ET, 19441env230|envision230|envision 230 graphics terminal, 19442 xenl@, 19443 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 19444 sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>, 19445 use=vt100, 19446# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic 19447# coupler attached, the whole rig fitting in a suitcase and more or less 19448# portable. Hot stuff for c.1977 :-) -- esr 19449ep48|ep4080|execuport 4080, 19450 OTbs, am, os, 19451 cols#80, 19452 bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J, 19453ep40|ep4000|execuport 4000, 19454 cols#136, use=ep4080, 19455# Adam Thompson <athompso@pangea.ca> tells us: 19456# Informer series - these are all portable units, resembling older 19457# automatic bread-baking machines. The terminal looks like a `clamshell' 19458# design, but isn't. The structure is similar to the Direct terminals, 19459# but only half the width. The entire unit is only about 10" wide. 19460# It features an 8" screen (6" or 7" if you have color!), and an 9"x6" 19461# keyboard. All the keys are crammed together, much like some laptop 19462# PCs today, but perhaps less well organized...all these units have a 19463# bewildering array of plugs on the back, including a built-in modem. 19464# The 305 was a color version of the 304; the 306 and 307 were mono and 19465# color terminals built for IBM bisync protocols. 19466# From: Paul Leondis <unllab@amber.berkeley.edu> 19467ifmr|Informer D304, 19468 OTbs, am, 19469 cols#80, lines#24, 19470 clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC, 19471 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\, 19472 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK, 19473 smso=\EJ, 19474# Entry largely based on wy60 and has the features of wy60ak. 19475opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys, 19476 am, bw, hs, km, mir, msgr, ul, xon, 19477 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80, 19478 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, 19479 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M, 19480 cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K, 19481 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r, 19482 ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>, 19483 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J, 19484 ip=$<3>, 19485 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12, 19486 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B, 19487 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY, 19488 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r, 19489 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 19490 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 19491 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 19492 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, 19493 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>, 19494 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 19495 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 19496 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>, 19497 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11, 19498 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>, 19499 rs3=\EwG\Ee($<150>, 19500 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 19501 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/, 19502 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177, 19503 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(, 19504 uc=\EG8\EG0, use=adm+sgr, 19505teletec|Teletec Datascreen, 19506 OTbs, am, 19507 cols#80, lines#24, 19508 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K, 19509 home=^^, ind=^J, 19510# From: Mark Dornfeld <romwa@ucbvax.berkeley.edu> 19511# This description is for the LANPAR Technologies VISION 3220 19512# terminal from 1984/85. The function key definitions k0-k5 represent the 19513# edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN, 19514# NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys. 19515# 19516# Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998: 19517# I had a couple of scopes (3221) like this once where I used to work, around 19518# the 1987 time frame if memory serves me correctly. These scopes were made 19519# by an outfit called LANPAR Technologies, and were meant to me DEC VT 220 19520# compatible. The 3220 was a plain text terminal like the VT-220, the 3221 19521# was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222 19522# was like the VT-241 (color with Regis + Sixel Graphics). These terminals 19523# (3221) cost about $1500 each, and one was always broken -- had to be sent 19524# back to the shop for repairs. 19525# The only real advantage these scopes had over the VT-240's were: 19526# 1) They were faster in the Regis display, or at least the ones I did 19527# 2) They had a handy debugging feature where you could split-screen the 19528# scope, the graphics would appear on the top, and the REGIS commands would 19529# appear on the bottom. I don't remember the VT-240s being able to do that. 19530# I would swear that LANPAR Technologies was in MA someplace, but since I 19531# don't work at the same place anymore, and those terminals and manuals were 19532# long since junked, I cannot be any more sure than that. 19533# 19534# (v3220: removed obsolete ":kn#10:", 19535# I added <rmam>/<smam> based on the init string -- esr) 19536v3220|LANPAR Vision II model 3220/3221/3222, 19537 OTbs, am, mir, xenl, 19538 cols#80, it#8, lines#24, 19539 clear=\E[H\E[J, cub1=^H, cuf1=\E[C, 19540 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 19541 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, 19542 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B, 19543 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~, 19544 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ, 19545 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l, 19546 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 19547 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, 19548######## ICH/ICH1 VERSUS RMIR/SMIR 19549# 19550# Some non-curses applications get confused if both ich/ich1 and rmir/smir 19551# are present; the symptom is doubled characters in an update using insert. 19552# These applications are technically correct; in both 4.3BSD termcap and 19553# terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir 19554# unless the terminal needs both. To my knowledge, no terminal still in this 19555# file requires both other than the very obsolete dm2500. 19556# 19557# For ncurses-based applications this is not a problem, as ncurses uses 19558# one or the other as appropriate but never mixes the two. Therefore we 19559# have not corrected entries like `linux' and `xterm' that specify both. 19560# If you see doubled characters from these, use the linux-nic and xterm-nic 19561# entries that suppress ich/ich1. And upgrade to ncurses! 19562# 19563 19564######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS 19565# 19566# ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and 19567# ECMA-48 standards are said to be almost identical, but are not the same 19568# as X3.64 (though for practical purposes they are close supersets of it). 19569# 19570# You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch 19571# requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for 19572# Coded Character Sets"), include your snail-mail address, and you should 19573# receive the document in due course. Don't expect an email acknowledgement. 19574# 19575# Related standards include "X3.4-1977: American National Standard Code for 19576# Information Interchange" (the ASCII standard) and "X3.41.1974: 19577# Code-Extension Techniques for Use with the 7-Bit Coded Character Set of 19578# American National Standard for Information Interchange." I believe (but 19579# am not certain) that these are effectively identical to ECMA-6 and ECMA-35 19580# respectively. 19581# 19582 19583#### VT100/ANSI/ECMA-48 19584# 19585# ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals 19586# and ECMA-48 Control Functions for Coded Character Sets. 19587# 19588# Much of the content of this comment is adapted from a table prepared by 19589# Richard Shuford, based on a 1984 Byte article. Terminfo correspondences, 19590# discussion of some terminfo-related issues, and updates to capture ECMA-48 19591# have been added. Control functions described in ECMA-48 only are tagged 19592# with * after their names. 19593# 19594# The table is a complete list of the defined ANSI X3.64/ECMA-48 control 19595# sequences. In the main table, \E stands for an escape (\033) character, 19596# SPC for space. Pn stands for a single numeric parameter to be inserted 19597# in decimal ASCII. Ps stands for a list of such parameters separated by 19598# semicolons. Parameter meanings for most parametrized sequences are 19599# decribed in the notes. 19600# 19601# Sequence Sequence Parameter or 19602# Mnemonic Name Sequence Value Mode terminfo 19603# ----------------------------------------------------------------------------- 19604# APC Applicatn Program Command \E _ - Delim - 19605# BEL Bell * ^G - - bel 19606# BPH Break Permitted Here * \E B - * - 19607# BS Backpace * ^H - EF - 19608# CAN Cancel * ^X - - - (A) 19609# CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt 19610# CCH Cancel Previous Character \E T - - - 19611# CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B) 19612# CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C) 19613# CMD Coding Method Delimiter * \E 19614# CNL Cursor Next Line \E [ Pn E 1 eF nel (D) 19615# CPL Cursor Preceding Line \E [ Pn F 1 eF - 19616# CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E) 19617# CSI Control Sequence Intro \E [ - Intro - 19618# CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F) 19619# CUB Cursor Backward \E [ Pn D 1 eF cub 19620# CUD Cursor Down \E [ Pn B 1 eF cud 19621# CUF Cursor Forward \E [ Pn C 1 eF cuf 19622# CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G) 19623# CUU Cursor Up \E [ Pn A 1 eF cuu 19624# CVT Cursor Vertical Tab \E [ Pn Y - eF - (H) 19625# DA Device Attributes \E [ Pn c 0 - - 19626# DAQ Define Area Qualification \E [ Ps o 0 - - 19627# DCH Delete Character \E [ Pn P 1 eF dch 19628# DCS Device Control String \E P - Delim - 19629# DL Delete Line \E [ Pn M 1 eF dl 19630# DLE Data Link Escape * ^P - - - 19631# DMI Disable Manual Input \E \ - Fs - 19632# DSR Device Status Report \E [ Ps n 0 - - (I) 19633# DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC - 19634# EA Erase in Area \E [ Ps O 0 eF - (J) 19635# ECH Erase Character \E [ Pn X 1 eF ech 19636# ED Erase in Display \E [ Ps J 0 eF ed (J) 19637# EF Erase in Field \E [ Ps N 0 eF - 19638# EL Erase in Line \E [ Ps K 0 eF el (J) 19639# EM End of Medium * ^Y - - - 19640# EMI Enable Manual Input \E b Fs - 19641# ENQ Enquire ^E - - - 19642# EOT End Of Transmission ^D - * - 19643# EPA End of Protected Area \E W - - - (K) 19644# ESA End of Selected Area \E G - - - 19645# ESC Escape ^[ - - - 19646# ETB End Transmission Block ^W - - - 19647# ETX End of Text ^C - - - 19648# FF Form Feed ^L - - - 19649# FNK Function Key * \E [ Pn SPC W - - - 19650# GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - - 19651# FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE - 19652# GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L) 19653# GSS Graphic Size Selection \E [ Pn SPC C none FE - 19654# HPA Horz Position Absolute \E [ Pn ` 1 FE - (B) 19655# HPB Char Position Backward \E [ j 1 FE - 19656# HPR Horz Position Relative \E [ Pn a 1 FE - (M) 19657# HT Horizontal Tab * ^I - FE - (N) 19658# HTJ Horz Tab w/Justification \E I - FE - 19659# HTS Horizontal Tab Set \E H - FE hts 19660# HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G) 19661# ICH Insert Character \E [ Pn @ 1 eF ich 19662# IDCS ID Device Control String \E [ SPC O - * - 19663# IGS ID Graphic Subrepertoire \E [ SPC M - * - 19664# IL Insert Line \E [ Pn L 1 eF il 19665# IND Index \E D - FE - 19666# INT Interrupt \E a - Fs - 19667# JFY Justify \E [ Ps SPC F 0 FE - 19668# IS1 Info Separator #1 * ^_ - * - 19669# IS2 Info Separator #1 * ^^ - * - 19670# IS3 Info Separator #1 * ^] - * - 19671# IS4 Info Separator #1 * ^\ - * - 19672# LF Line Feed ^J - - - 19673# LS1R Locking Shift Right 1 * \E ~ - - - 19674# LS2 Locking Shift 2 * \E n - - - 19675# LS2R Locking Shift Right 2 * \E } - - - 19676# LS3 Locking Shift 3 * \E o - - - 19677# LS3R Locking Shift Right 3 * \E | - - - 19678# MC Media Copy \E [ Ps i 0 - - (S) 19679# MW Message Waiting \E U - - - 19680# NAK Negative Acknowledge * ^U - * - 19681# NBH No Break Here * \E C - - - 19682# NEL Next Line \E E - FE nel (D) 19683# NP Next Page \E [ Pn U 1 eF - 19684# NUL Null * ^@ - - - 19685# OSC Operating System Command \E ] - Delim - 19686# PEC Pres. Expand/Contract * \E Pn SPC Z 0 - - 19687# PFS Page Format Selection * \E Pn SPC J 0 - - 19688# PLD Partial Line Down \E K - FE - (T) 19689# PLU Partial Line Up \E L - FE - (U) 19690# PM Privacy Message \E ^ - Delim - 19691# PP Preceding Page \E [ Pn V 1 eF - 19692# PPA Page Position Absolute * \E [ Pn SPC P 1 FE - 19693# PPB Page Position Backward * \E [ Pn SPC R 1 FE - 19694# PPR Page Position Forward * \E [ Pn SPC Q 1 FE - 19695# PTX Parallel Texts * \E [ \ - - - 19696# PU1 Private Use 1 \E Q - - - 19697# PU2 Private Use 2 \E R - - - 19698# QUAD Typographic Quadding \E [ Ps SPC H 0 FE - 19699# REP Repeat Char or Control \E [ Pn b 1 - rep 19700# RI Reverse Index \E M - FE - (V) 19701# RIS Reset to Initial State \E c - Fs - 19702# RM Reset Mode * \E [ Ps l - - - (W) 19703# SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - - 19704# SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X) 19705# SCI Single-Char Introducer \E Z - - - 19706# SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - - 19707# SCS Set Char. Spacing * \E [ Pn SPC g - - - 19708# SD Scroll Down \E [ Pn T 1 eF rin 19709# SDS Start Directed String * \E [ Pn ] 1 - - 19710# SEE Select Editing Extent \E [ Ps Q 0 - - (Y) 19711# SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - - 19712# SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O) 19713# SHS Select Char. Spacing * \E [ Ps SPC K 0 - - 19714# SI Shift In ^O - - - (P) 19715# SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - - 19716# SL Scroll Left \E [ Pn SPC @ 1 eF - 19717# SLH Set Line Home * \E [ Pn SPC U - - - 19718# SLL Set Line Limit * \E [ Pn SPC V - - - 19719# SLS Set Line Spacing * \E [ Pn SPC h - - - 19720# SM Select Mode \E [ Ps h none - - (W) 19721# SO Shift Out ^N - - - (Q) 19722# SOH Start Of Heading * ^A - - - 19723# SOS Start of String * \E X - - - 19724# SPA Start of Protected Area \E V - - - (Z) 19725# SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - - 19726# SPH Set Page Home * \E [ Ps SPC G - - - 19727# SPI Spacing Increment \E [ Pn ; Pn SPC G none FE - 19728# SPL Set Page Limit * \E [ Ps SPC j - - - 19729# SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - - 19730# SR Scroll Right \E [ Pn SPC A 1 eF - 19731# SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - - 19732# SRS Start Reversed String * \E [ Ps [ 0 - - 19733# SSA Start of Selected Area \E F - - - 19734# SSU Select Size Unit * \E [ Pn SPC I 0 - - 19735# SSW Set Space Width * \E [ Pn SPC [ none - - 19736# SS2 Single Shift 2 (G2 set) \E N - Intro - 19737# SS3 Single Shift 3 (G3 set) \E O - Intro - 19738# ST String Terminator \E \ - Delim - 19739# STAB Selective Tabulation * \E [ Pn SPC ^ - - - 19740# STS Set Transmit State \E S - - - 19741# STX Start pf Text * ^B - - - 19742# SU Scroll Up \E [ Pn S 1 eF indn 19743# SUB Substitute * ^Z - - - 19744# SVS Select Line Spacing * \E [ Pn SPC \ 1 - - 19745# SYN Synchronous Idle * ^F - - - 19746# TAC Tabul. Aligned Centered * \E [ Pn SPC b - - - 19747# TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - - 19748# TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - - 19749# TBC Tab Clear \E [ Ps g 0 FE tbc 19750# TCC Tabul. Centered on Char * \E [ Pn SPC c - - - 19751# TSR Tabulation Stop Remove * \E [ Pn SPC d - FE - 19752# TSS Thin Space Specification \E [ Pn SC E none FE - 19753# VPA Vert. Position Absolute \E [ Pn d 1 FE vpa 19754# VPB Line Position Backward * \E [ Pn k 1 FE - 19755# VPR Vert. Position Relative \E [ Pn e 1 FE - (R) 19756# VT Vertical Tabulation * ^K - FE - 19757# VTS Vertical Tabulation Set \E J - FE - 19758# 19759# --------------------------------------------------------------------------- 19760# 19761# Notes: 19762# 19763# Some control characters are listed in the ECMA-48 standard without 19764# being assigned functions relevant to terminal control there (they 19765# referred to other standards such as ISO 1745 or ECMA-35). They are listed 19766# here anyway for completeness. 19767# 19768# (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation. 19769# 19770# (B) There seems to be some confusion abroad between CHA and HPA. Most 19771# `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls 19772# the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but 19773# preserved the CHA abbreviation. 19774# 19775# (C) CHT corresponds to terminfo (tab). Usually it has the value ^I. 19776# Occasionally (as on, for example, certain HP terminals) this has the HTJ 19777# value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the 19778# CHT abbreviation. 19779# 19780# (D) terminfo (nel) is usually \r\n rather than ANSI \EE. 19781# 19782# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR 19783# abbreviation. 19784# 19785# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear 19786# char tab, 3 = clear line tab, 4 = clear all char tabs on current line, 19787# 5 = clear all char tabs, 6 = clear all line tabs. 19788# 19789# (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept 19790# HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character 19791# Position Absolute" but retains the HVP abbreviation. 19792# 19793# (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT 19794# abbreviation. 19795# 19796# (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR 19797# later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request 19798# DSR, 6 = request CPR response. 19799# 19800# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end, 19801# 1 = clear from beginning, 2 = clear. 19802# 19803# (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation. 19804# 19805# (L) The GSM parameters are vertical and horizontal parameters to scale by. 19806# 19807# (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals 19808# use CUF for this function and ignore HPR. ECMA-48 calls this "Character 19809# Position Relative" but retains the HPR abbreviation. 19810# 19811# (N) ECMA-48 calls this "Character Tabulation" but retains the HT 19812# abbreviation. 19813# 19814# (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold, 19815# 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink, 19816# 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion), 19817# 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur, 19818# 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4, 19819# 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off 19820# 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow 19821# fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set 19822# fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg 19823# 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg, 19824# 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set 19825# default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 = 19826# overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved, 19827# 61-65 = variable highlights for ideograms. 19828# 19829# (P) SI is also called LSO, Locking Shift Zero. 19830# 19831# (Q) SI is also called LS1, Locking Shift One. 19832# 19833# (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals 19834# use CUD for this function and ignore VPR. ECMA calls it `Line Position 19835# Absolute' but retains the VPA abbreviation. 19836# 19837# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from 19838# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer 19839# from secondary aux device, 4 = stop relay to primary aux device, 5 = 19840# start relay to primary aux device, 6 = stop relay to secondary aux device, 19841# 7 = start relay to secondary aux device. 19842# 19843# (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD 19844# abbreviation. 19845# 19846# (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU 19847# abbreviation. 19848# 19849# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation. 19850# 19851# (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM), 19852# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM), 19853# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM), 19854# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional 19855# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM), 19856# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM), 19857# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM), 19858# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer 19859# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer 19860# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed 19861# New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 = 19862# Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed 19863# from ECMA-48's 5th edition but are listed here for reference. 19864# 19865# (X) Select Alternate Presentation Variants is used only for non-Latin 19866# alphabets. 19867# 19868# (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM). 19869# 19870# (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA 19871# abbreviation. 19872# 19873# --------------------------------------------------------------------------- 19874# 19875# Abbreviations: 19876# 19877# Intro an Introducer of some kind of defined sequence; the normal 7-bit 19878# X3.64 Control Sequence Introducer is the two characters "Escape [" 19879# 19880# Delim a Delimiter 19881# 19882# x/y identifies a character by position in the ASCII table (column/row) 19883# 19884# eF editor function (see explanation) 19885# 19886# FE format effector (see explanation) 19887# 19888# F is a Final character in 19889# an Escape sequence (F from 3/0 to 7/14 in the ASCII table) 19890# a control sequence (F from 4/0 to 7/14) 19891# 19892# Gs is a graphic character appearing in strings (Gs ranges from 19893# 2/0 to 7/14) in the ASCII table 19894# 19895# Ce is a control represented as a single bit combination in the C1 set 19896# of controls in an 8-bit character set 19897# 19898# C0 the familiar set of 7-bit ASCII control characters 19899# 19900# C1 roughly, the set of control chars available only in 8-bit systems. 19901# This is too complicated to explain fully here, so read Jim Fleming's 19902# article in the February 1983 BYTE, especially pages 214 through 224. 19903# 19904# Fe is a Final character of a 2-character Escape sequence that has an 19905# equivalent representation in an 8-bit environment as a Ce-type 19906# (Fe ranges from 4/0 to 5/15) 19907# 19908# Fs is a Final character of a 2-character Escape sequence that is 19909# standardized internationally with identical representation in 7-bit 19910# and 8-bit environments and is independent of the currently 19911# designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14) 19912# 19913# I is an Intermediate character from 2/0 to 2/15 (inclusive) in the 19914# ASCII table 19915# 19916# P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII 19917# table 19918# 19919# Pn is a numeric parameter in a control sequence, a string of zero or 19920# more characters ranging from 3/0 to 3/9 in the ASCII table 19921# 19922# Ps is a variable number of selective parameters in a control sequence 19923# with each selective parameter separated from the other by the code 19924# 3/11 (which usually represents a semicolon); Ps ranges from 19925# 3/0 to 3/9 and includes 3/11 19926# 19927# * Not relevant to terminal control, listed for completeness only. 19928# 19929# Format Effectors versus Editor Functions 19930# 19931# A format effector specifies how following output is to be displayed. 19932# An editor function allows you to modify the display. Informally 19933# format effectors may be destructive; format effectors should not be. 19934# 19935# For instance, a format effector that moves the "active position" (the 19936# cursor or equivalent) one space to the left would be useful when you want to 19937# create an overstrike, a compound character made of two standard characters 19938# overlaid. Control-H, the Backspace character, is actually supposed to be a 19939# format effector, so you can do this. But many systems use it in a 19940# nonstandard fashion, as an editor function, deleting the character to the 19941# left of the cursor and moving the cursor left. When Control-H is assumed to 19942# be an editor function, you cannot predict whether its use will create an 19943# overstrike unless you also know whether the output device is in an "insert 19944# mode" or an "overwrite mode". When Control-H is used as a format effector, 19945# its effect can always be predicted. The familiar characters carriage 19946# return, linefeed, formfeed, etc., are defined as format effectors. 19947# 19948# NOTES ON THE DEC VT100 IMPLEMENTATION 19949# 19950# Control sequences implemented in the VT100 are as follows: 19951# 19952# CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND, 19953# LNM, NEL, RI, RIS, RM, SGR, SM, TBC 19954# 19955# plus several private DEC commands. 19956# 19957# Erasing parts of the display (EL and ED) in the VT100 is performed thus: 19958# 19959# Erase from cursor to end of line Esc [ 0 K or Esc [ K 19960# Erase from beginning of line to cursor Esc [ 1 K 19961# Erase line containing cursor Esc [ 2 K 19962# Erase from cursor to end of screen Esc [ 0 J or Esc [ J 19963# Erase from beginning of screen to cursor Esc [ 1 J 19964# Erase entire screen Esc [ 2 J 19965# 19966# Some brain-damaged terminal/emulators respond to Esc [ J as if it were 19967# Esc [ 2 J, but this is wrong; the default is 0. 19968# 19969# The VT100 responds to receiving the DA (Device Attributes) control 19970# 19971# Esc [ c (or Esc [ 0 c) 19972# 19973# by transmitting the sequence 19974# 19975# Esc [ ? l ; Ps c 19976# 19977# where Ps is a character that describes installed options. 19978# 19979# The VT100's cursor location can be read with the DSR (Device Status 19980# Report) control 19981# 19982# Esc [ 6 n 19983# 19984# The VT100 reports by transmitting the CPR sequence 19985# 19986# Esc [ Pl ; Pc R 19987# 19988# where Pl is the line number and Pc is the column number (in decimal). 19989# 19990# The specification for the DEC VT100 is document EK-VT100-UG-003. 19991 19992#### ANSI.SYS 19993# 19994# Here is a description of the color and attribute controls supported in the 19995# the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI 19996# terminal emulators for Intel boxes obey these. They are a proper subset 19997# of the ECMA-48 escapes. 19998# 19999# 0 all attributes off 20000# 1 foreground bright 20001# 4 underscore on 20002# 5 blink on/background bright (not reliable with brown) 20003# 7 reverse-video 20004# 8 set blank (non-display) 20005# 10 set primary font 20006# 11 set first alternate font (on PCs, display ROM characters 1-31) 20007# 12 set second alternate font (on PCs, display IBM high-half chars) 20008# 20009# Color attribute sets 20010# 3n set foreground color / 0=black, 1=red, 2=green, 3=brown, 20011# 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white 20012# Bright black becomes gray. Bright brown becomes yellow, 20013# These coincide with the prescriptions of the ISO 6429/ECMA-48 standard. 20014# 20015# * If the 5 attribute is on and you set a background color (40-47) it is 20016# supposed to enable bright background. 20017# 20018# * Many VGA cards (such as the Paradise and compatibles) do the wrong thing 20019# when you try to set a "bright brown" (yellow) background with attribute 20020# 5 (you get a blinking yellow foreground instead). A few displays 20021# (including the System V console) support an attribute 6 that undoes this 20022# braindamage (this is required by iBCS2). 20023# 20024# * Some older versions of ANSI.SYS have a bug that causes thems to require 20025# ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48 20026# compatible.) 20027 20028#### Intel Binary Compatibility Standard 20029# 20030# For comparison, here are the capabilities implied by the Intel Binary 20031# Compatibility Standard for UNIX systems (Intel order number 468366-001). 20032# These recommendations are optional. IBCS2 allows the leading escape to 20033# be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with 20034# the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities 20035# (as described in figure 9-3 of the standard). Those expressed in the ibcs2 20036# terminfo entry are followed with the corresponding capability in parens: 20037# 20038# CSI <n>k disable (n=0) or enable (n=1) keyclick 20039# CSI 2h lock keyboard 20040# CSI 2i send screen as input 20041# CSI 2l unlock keyboard 20042# CSI 6m enable background color intensity 20043# CSI <0-2>c reserved 20044# CSI <0-59>m select graphic rendition 20045# CSI <n>;<m>H (cup) cursor to line n and column m 20046# CSI <n>;<m>f cursor to line n and column m 20047# CSI <n>@ (ich) insert characters 20048# CSI <n>A (cuu) cursor up n lines 20049# CSI <n>B (cud) cursor down n lines 20050# CSI <n>C (cuu) cursor right n characters 20051# CSI <n>D (cud) cursor left n characters 20052# CSI <n>E cursor down n lines and in first column 20053# CSI <n>F cursor up n lines and in first column 20054# CSI <n>G (hpa) position cursor at column n-1 20055# CSI <n>J (ed) erase in display 20056# CSI <n>K (el) erase in line 20057# CSI <n>L (il) insert line(s) 20058# CSI <n>P (dch) delete characters 20059# CSI <n>S (indn) scroll up n lines 20060# CSI <n>T (rin) scroll down n lines 20061# CSI <n>X (ech) erase characters 20062# CSI <n>Z (cbt) back up n tab stops 20063# CSI <n>` cursor to column n on line 20064# CSI <n>a (cuu) cursor right n characters 20065# CSI <n>d (vpa) cursor to line n 20066# CSI <n>e cursor down n lines and in first column 20067# CSI <n>g (cbt) clear all tabs 20068# CSI <n>z make virtual terminal n active 20069# CSI ?7h (smam) turn automargin on 20070# CSI ?7l (rmam) turn automargin off 20071# CSI s save cursor position 20072# CSI u restore cursor position to saved value 20073# CSI =<c>A set overscan color 20074# CSI =<c>F set normal foreground color 20075# CSI =<c>G set normal background color 20076# CSI =<c>H set reverse foreground color 20077# CSI =<c>I set reverse foreground color 20078# CSI =<c>J set graphic foreground color 20079# CSI =<c>K set graphic foreground color 20080# CSI =<n>g (dispc) display n from alternate graphics character set 20081# CSI =<p>;<d>B set bell parameters 20082# CSI =<s>;<e>C set cursor parameters 20083# CSI =<x>D enable/disable intensity of background color 20084# CSI =<x>E set/clear blink vs. bold background 20085# CSI 7 (sc) (sc) save cursor position 20086# CSI 8 (rc) (rc) restore cursor position to saved value 20087# CSI H (hts) (hts) set tab stop 20088# CSI Q<n><string> define function key string 20089# (string must begin and end with delimiter char) 20090# CSI c (clear) clear screen 20091# 20092# The lack of any specification for attributes in SGR (among other things) 20093# makes this a wretchedly weak standard. The table above is literally 20094# everything iBSC2 has to say about terminal escape sequences; there is 20095# no further discussion of their meaning or how to set the parameters 20096# in these sequences at all. 20097# 20098 20099######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE 20100# 20101# The historical termcap file entries were written primarily in 4.4BSD termcap. 20102# The 4.4BSD termcap set was substantially larger than the original 4.1BSD set, 20103# with the extension names chosen for compatibility with the termcap names 20104# assigned in System V terminfo. There are some variant extension sets out 20105# there. We try to describe them here. 20106# 20107# XENIX extensions: 20108# 20109# The XENIX extensions include a set of function-key capabilities as follows: 20110# 20111# code XENIX variable name terminfo name name clashes? 20112# ---- ------------------- ------------- ----------------------- 20113# CL key_char_left 20114# CR key_char_right 20115# CW key_change_window create_window 20116# EN key_end kend 20117# HM key_home khome 20118# HP ?? 20119# LD key_delete_line kdl1 20120# LF key_linefeed label_off 20121# NU key_next_unlocked_cell 20122# PD key_page_down knp 20123# PL ?? 20124# PN start_print mc5 20125# PR ?? 20126# PS stop_print mc4 20127# PU key_page_up kpp pulse 20128# RC key_recalc remove_clock 20129# RF key_toggle_ref req_for_input 20130# RT key_return kent 20131# UP key_up_arrow kcuu1 parm_up_cursor 20132# WL key_word_left 20133# WR key_word_right 20134# 20135# The XENIX extensions also include the following character-set and highlight 20136# capabilities: 20137# 20138# XENIX terminfo function 20139# ----- -------- ------------------------------ 20140# GS smacs start alternate character set 20141# GE rmacs end alternate character set 20142# GG :as:/:ae: glitch (analogous to :sg:/:ug:) 20143# bo blink begin blink (not used in /etc/termcap) 20144# be end blink (not used in /etc/termcap) 20145# bb blink glitch (not used in /etc/termcap) 20146# it dim begin dim (not used in /etc/termcap) 20147# ie end dim (not used in /etc/termcap) 20148# ig dim glitch (not used in /etc/termcap) 20149# 20150# Finally, XENIX also used the following forms-drawing capabilities: 20151# 20152# single double type ASCII approximation 20153# ------ ------ ------------- ------------------- 20154# GV Gv vertical line | 20155# GH Gv horizontal line - _ 20156# G1 G5 top right corner _ | 20157# G2 G6 top left corner | 20158# G3 G7 bottom left corner |_ 20159# G4 G8 bottom right corner _| 20160# GD Gd down-tick character T 20161# GL Gl left-tick character -| 20162# GR Gr right-tick character |- 20163# GC Gc middle intersection -|- 20164# GU Gu up-tick character _|_ 20165# 20166# These were invented to take advantage of the IBM PC ROM character set. One 20167# can compose an acsc string from the single-width characters as follows 20168# "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}" 20169# When translating a termcap file, ncurses tic will do this automatically. 20170# The double forms characters don't fit the SVr4 terminfo model. 20171# 20172# AT&T Extensions: 20173# 20174# The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of 20175# nonstandard capabilities. Its signature is the KM capability, used to name 20176# some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this 20177# set. Comments in the original, and a little cross-checking with other AT&T 20178# documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh: 20179# (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights), 20180# FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make 20181# cursor invisible), and CV=:ve: (make cursor normal). 20182# 20183# HP Extensions 20184# 20185# The HP library (as of mid-1995, their term.h file version 70.1) appears to 20186# have the System V capabilities up to SVr1 level. After that, it supports 20187# two nonstandard caps meml and memu corresponding to the old termcap :ml:, 20188# :mu: capabilities. After that, it supports caps plab_norm, label_on, 20189# label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the 20190# HP binary format incompatible with SVr4's. 20191# 20192# IBM Extensions 20193# 20194# There is a set of nonstandard terminfos used by IBM's AIX operating system. 20195# The AIX terminfo library diverged from SVr1 terminfo, and replaces all 20196# capabilities following prtr_non with the following special capabilties: 20197# box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab, 20198# kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr, 20199# ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml, 20200# rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents: 20201# kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be 20202# renamed (to kcbt and kslt). The places in the box[12] capabilities 20203# correspond to acsc chars, here is the mapping: 20204# 20205# box1[0] = ACS_ULCORNER 20206# box1[1] = ACS_HLINE 20207# box1[2] = ACS_URCORNER 20208# box1[3] = ACS_VLINE 20209# box1[4] = ACS_LRCORNER 20210# box1[5] = ACS_LLCORNER 20211# box1[6] = ACS_TTEE 20212# box1[7] = ACS_RTEE 20213# box1[8] = ACS_BTEE 20214# box1[9] = ACS_LTEE 20215# box1[10] = ACS_PLUS 20216# 20217# The box2 characters are the double-line versions of these forms graphics. 20218# The AIX binary terminfo format is incompatible with SVr4's. 20219# 20220# Iris console extensions: 20221# 20222# HS is half-intensity start; HE is half-intensity end 20223# CT is color terminal type (for Curses & rogue) 20224# CP is color change escape sequence 20225# CZ are color names (for Curses & rogue) 20226# 20227# The ncurses tic utility recognizes HS as an alias for mh <dim>. 20228# 20229# TC Extensions: 20230# 20231# There is a set of extended termcaps associated with something 20232# called the "Terminal Control" or TC package created by MainStream Systems, 20233# Winfield Kansas. This one also uses GS/GE for as/ae, and also uses 20234# CF for civis and CO for cvvis. Finally, they define a boolean :ct: 20235# that flags color terminals. 20236# 20237######## CHANGE HISTORY 20238# 20239# The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94. 20240# Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses 20241# project. 20242# 20243# This file contains all the capability information present in John Kunze's 20244# last version of the termcap master file, except as noted in the change 20245# comments at end of file. Some information about very ancient obsolete 20246# capabilities has been moved to comments. Some all-numeric names of older 20247# terminals have been retired. 20248# 20249# I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some 20250# capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer 20251# used by BSD curses. 20252# 20253# The 9.1.0 version of this file was translated from my lightly-edited copy of 20254# 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for 20255# the purpose. Unless the ncurses tic implementation and the Lisp code were 20256# making perfectly synchronized mistakes which I then failed to catch by 20257# eyeball, the translation was correct and perfectly information-preserving. 20258# 20259# Major version number bumps correspond to major version changes in ncurses. 20260# 20261# Here is a log of the changes since then: 20262# 20263# 9.1.0 (Wed Feb 1 04:50:32 EST 1995): 20264# * First terminfo master translated from 8.3. 20265# 9.2.0 (Wed Feb 1 12:21:45 EST 1995): 20266# * Replaced Wyse entries with updated entries supplied by vendor. 20267# 20268# 9.3.0 (Mon Feb 6 19:14:40 EST 1995): 20269# * Added contact & status info from G. Clark Brown <clark@sssi.com>. 20270# 9.3.1 (Tue Feb 7 12:00:24 EST 1995): 20271# * Better XENIX keycap translation. Describe TC termcaps. 20272# * Contact and history info supplied by Qume. 20273# 9.3.2 (Sat Feb 11 23:40:02 EST 1995): 20274# * Raided the Shuford FTP site for recent termcaps/terminfos. 20275# * Added information on X3.64 and VT100 standard escape sequences. 20276# 9.3.3 (Mon Feb 13 12:26:15 EST 1995): 20277# * Added a correct X11R6 xterm entry. 20278# * Fixed terminfo translations of padding. 20279# 9.3.4 (Wed Feb 22 19:27:34 EST 1995): 20280# * Added correct acsc/smacs/rmacs strings for vt100 and xterm. 20281# * Added u6/u7/u8/u9 capabilities. 20282# * Added PCVT entry. 20283# 9.3.5 (Thu Feb 23 09:37:12 EST 1995): 20284# * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry 20285# to use reverse-video standout so Emacs will look right. 20286# * Added el1 capability to ansi. 20287# * Added smacs/rmacs to ansi.sys. 20288# 20289# 9.4.0 (Sat Feb 25 16:43:25 EST 1995): 20290# * New mt70 entry. 20291# * Added COPYRIGHTS AND OTHER DELUSIONS. 20292# * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics 20293# smartvid & smarterm, ampex 175 & 219 & 232, 20294# env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20, 20295# ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2, 20296# screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan, 20297# adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500. 20298# * Replaced the Perkin-Elmer entries with vendor's official ones. 20299# * Restored the old minimal-ansi entry, luna needs it. 20300# * Fixed some incorrect ip and proportional-padding translations. 20301# 9.4.1 (Mon Feb 27 14:18:33 EST 1995): 20302# * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly. 20303# * Make the xterm entry 65 lines again; create xterm25 and xterm24 20304# to force a particular height. 20305# * Added beehive4 and reorganized other Harris entries. 20306# 9.4.2 (Thu Mar 9 01:45:44 EST 1995): 20307# * Merged in DEC's official entries for its terminals. The only old 20308# entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo). 20309# * Replaced the translated BBN Bitgraph entries with purpose-built 20310# ones from AT&T's SVr3. 20311# * Replaced the AT&T entries with AT&T's official terminfos. 20312# * Added teleray 16, vc415, cops10. 20313# * Merged in many individual capabilities from SCO terminfo files. 20314# 9.4.3 (Mon Mar 13 02:37:53 EST 1995): 20315# * Typo fixes. 20316# * Change linux entry so A_PROTECT enables IBM-PC ROM characters. 20317# 9.4.4 (Mon Mar 27 12:32:35 EST 1995): 20318# * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803, 20319# pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21, 20320# simterm, citoh and variants. 20321# * Replaced sol entry with sol1 and sol2. 20322# * Replaced Qume QVT and Freedom-series entries with purpose-built 20323# terminfo entries. 20324# * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek 20325# and dg200 entries using caps from from SCO. 20326# * Added the usual set of function-key mappings to ANSI entry. 20327# * Corrected xterm's function-key capabilities. 20328# 9.4.5 (Tue Mar 28 14:27:49 EST 1995): 20329# * Fix in xterm entry, cub and cud are not reliable under X11R6. 20330# 9.4.6 (Thu Mar 30 14:52:15 EST 1995): 20331# * Fix in xterm entry, get the arrow keys right. 20332# * Change some \0 escapes to \200. 20333# 9.4.7 (Tue Apr 4 11:27:11 EDT 1995) 20334# * Added apple (Videx card), adm1a, oadm31. 20335# * Fixed malformed ampex csr. 20336# * Fixed act4, cyb110; they had old-style prefix padding left in. 20337# * Changed mandatory to advisory padding in many entries. 20338# * Replaced HP entries up to hpsub with purpose-built ones. 20339# * Blank rmir/smir/rmdc/smdc capabilities removed. 20340# * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924. 20341# 9.4.8 (Fri Apr 7 09:36:34 EDT 199): 20342# * Replaced the Ann Arbor entries with SCO's, the init strings are 20343# more efficient (but the entries otherwise identical). 20344# * Added dg211 from Shuford archive. 20345# * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk, 20346# adm42-nl, pc52, gs6300, xerox820, uts30. 20347# * Pull SCO's padding into vi200 entry. 20348# * Improved capabilities for tvi4107 and other Televideo and Viewpoint 20349# entries merged in from SCO's descriptions. 20350# * Fixed old-style prefix padding on zen50, h1500. 20351# * Moved old superbee entry to superbee-xsb, pulled in new superbee 20352# entry from SCO's description. 20353# * Reorganized the special entries. 20354# * Added lm#0 to cbunix and virtual entries. 20355# 20356# 9.5.0 (Mon Apr 10 11:30:00 EDT 1995): 20357# * Restored cdc456tst. 20358# * Fixed sb1 entry, SCO erroneously left out the xsb glitch. 20359# * Added megatek, beacon, microkit. 20360# * Freeze for ncurses-1.9 release. 20361# 9.5.1 (Fri Apr 21 12:46:42 EDT 1995): 20362# * Added historical data for TAB. 20363# * Comment fixes from David MacKenzie. 20364# * Added the new BSDI pc3 entry. 20365# 9.5.2 (Tue Apr 25 17:27:52 EDT 1995) 20366# * A change in the tic -C logic now ensures that all entries in 20367# the termcap translation will fit in < 1024 bytes. 20368# * Added `bobcat' and `gator' HP consoles and the Nu machine entries 20369# from GNU termcap file. This merges in all their local information. 20370# 9.5.3 (Tue Apr 25 22:28:13 EDT 1995) 20371# * Changed tic -C logic to dump all capabilities used by GNU termcap. 20372# * Added warnings about entries with long translations (restoring 20373# all the GNU termcaps pushes a few over the edge). 20374# 9.5.4 (Wed Apr 26 15:35:09 EDT 1995) 20375# * Yet another tic change, and a couple of entry tweaks, to reduce the 20376# number of long (> 1024) termcap translations back to 0. 20377# 20378# 9.6.0 (Mon May 1 10:35:54 EDT 1995) 20379# * Added kf13-kf20 to Linux entry. 20380# * Regularize Prime terminal names. 20381# * Historical data on Synertek. 20382# * Freeze for ncurses-1.9.1. 20383# 9.6.1 (Sat May 6 02:00:52 EDT 1995): 20384# * Added true xterm-color entry, renamed djm's pseudo-color entry. 20385# * Eliminate whitespace in short name fields, this tanks some scripts. 20386# * Name field changes to shorten some long entries. 20387# * Termcap translation now automatically generates empty rmir/smir 20388# when ich1/ich is present (copes with an ancient vi bug). 20389# * Added `screen' entries from FSF's screen-3.6.2. 20390# * Added linux-nic and xterm-nic entries. 20391# 9.6.2 (Sat May 6 17:00:55 EDT 1995): 20392# * Change linux entry to use smacs=\E[11m and have an explicit acsc, 20393# eliminating some special-case code in ncurses. 20394# 20395# 9.7.0 (Tue May 9 18:03:12 EDT 1995): 20396# * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think 20397# that captures everything unique from it. 20398# * Added reorder script generator. 20399# * Freeze for ncurses 1.9.2 release. 20400# 9.7.1 (Thu Jun 29 09:35:22 EDT 1995): 20401# * Added Sean Farley's kspd, flash, rs1 capabilities for linux. 20402# * Added Olaf Siebert's corrections for adm12. 20403# * ansi-pc-color now includes the colors and pairs caps, so that 20404# entries which use it will inherit them automatically. 20405# * The linux entry can now recognize the center (keypad 5) key. 20406# * Removed some junk that found its way into Linux acsc. 20407# 20408# 9.8.0 (Fri Jul 7 04:46:57 EDT 1995): 20409# * Add 50% cut mark as a desperate hack to reduce tic's core usage. 20410# * xterm doesn't try to use application keypad mode any more. 20411# * Freeze for ncurses-1.9.3 release. 20412# 9.8.1 (Thu Jul 19 17:02:12 EDT 1995): 20413# * Added corrected sun entry from vendor. 20414# * Added csr capability to linux entry. 20415# * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG. 20416# * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators. 20417# * Some commented-out caps in long entries come back in, my code 20418# for computing string-table lengths had a bug in it. 20419# * pcansi series modified to fit comm-program reality better. 20420# 9.8.2 (Sat Sep 9 23:35:00 EDT 1995): 20421# * BSD/OS actually ships the ibmpc3 bold entry as its console. 20422# * Correct some bad aliases in the pcansi series 20423# * Added entry for QNX console. 20424# * Clean up duplicate long names for use with 4.4 library. 20425# * Change vt100 standout to be normal reverse vide, not bright reverse; 20426# this makes the Emacs status line look better. 20427# 9.8.3 (Sun Sep 10 13:07:34 EDT 1995): 20428# * Added Adam Thompson's VT320 entries, also his dtx-sas and z340. 20429# * Minor surgery, mostly on name strings, to shorten termcap version. 20430# 20431# 9.9.0 (Sat Sep 16 23:03:48 EDT 1995): 20432# * Added dec-vt100 for use with the EWAN emulator. 20433# * Added kmous to xterm for use with xterm's mouse-tracking facility. 20434# * Freeze for 1.9.5 alpha release. 20435# 9.9.1 (Wed Sep 20 13:46:09 EDT 1995): 20436# * Changed xterm lines to 24, the X11R6 default. 20437# 9.9.2 (Sat Sep 23 21:29:21 EDT 1995): 20438# * Added 7 newly discovered, undocumented acsc characters to linux 20439# entry (the pryz{|} characters). 20440# * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly. 20441# * Correct two typos in the xterm entries introduced in 9.9.1. 20442# * I finally figured out how to translate ko capabilities. Done. 20443# * Added tvi921 entries from Tim Theisen. 20444# * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl. 20445# * Removed mystery tec entry, it was neither interesting nor useful. 20446# * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f, 20447# vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a, 20448# trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211, 20449# by making them relative to use capabilities 20450# * Added cuf1=^L to tvi925 from deleted variant tvi925a. 20451# * fixed cup in adm22 entry and parametrized strings in vt320-k3. 20452# * added it#8 to entries that used to have :pt: -- tvi912, vi200, 20453# ampex80, 20454# * Translate all home=\E[;H capabilities to home=\E[H, they're 20455# equivalent. 20456# * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of 20457# vt100 and ANSI-like terminals. 20458# 9.9.3 (Tue Sep 26 20:11:15 EDT 1995): 20459# * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic 20460# does this now, too. 20461# * fviewpoint is gone, it duplicated screwpoint. 20462# * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c, 20463# ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3, 20464# versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW. 20465# The UW vi50 replaces the old one, which becomes vi50adm, 20466# * No more embedded commas in name fields. 20467# 20468# 9.10.0 (Wed Oct 4 15:39:37 EDT 1995): 20469# * XENIX forms characters in fos, trs16, scoansi become acsc strings, 20470# * Introduced klone+* entries for describing Intel-console behavior. 20471# * Linux kbs is default-mapped to delete for some brain-dead reason. 20472# * -nsl -> -ns. The -pp syntax is obsolete. 20473# * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs. 20474# * Make xterm entry do application-keypad mode again. I got complaints 20475# that it was messing up someone's 3270 emulator. 20476# * Added some longname fields in order to avoid warning messages from 20477# older tic implementations. 20478# * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use 20479# it! (This gives us pi, greater than, less than, and a few more.) 20480# * Freeze for ncurses-1.9.6 release. 20481# 9.10.1 (Sat Oct 21 22:18:09 EDT 1995): 20482# * Add xon to a number of console entries, they're memory-mapped and 20483# don't need padding. 20484# * Correct the use dependencies in the ansi series. 20485# * Hand-translate more XENIX capabilities. 20486# * Added hpterm entry for HP's X terminal emulator. 20487# * Added aixterm entries. 20488# * Shortened four names so everything fits in 14 chars. 20489# 20490# 9.11.0 (Thu Nov 2 17:29:35 EST 1995): 20491# * Added ibcs2 entry and info on iBCS2 standard. 20492# * Corrected hpa/vpa in linux entry. They still fail the worm test. 20493# * We can handle the HP meml/memu capability now. 20494# * Added smacs to klone entries, just as documentation. 20495# * Carrected ansi.sys and cit-500 entries. 20496# * Added z39, vt320-k311, v220c, and avatar entries. 20497# * Make pcansi use the ansi.sys invis capability. 20498# * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c, 20499# tvi925, tvi950, dt80, ncr7900i, h19. 20500# * X3.64 has been withdrawn, change some references. 20501# * Removed function keys from ansi-m entry. 20502# * Corrected ansi.sys entry. 20503# * Freeze for ncurses-1.9.7 release. 20504# 9.11.1 (Tue Nov 6 18:18:38 EST 1995): 20505# * Added rmam/smam capabilities to many entries based on init strings. 20506# * Added correct hpa/vpa to linux. 20507# * Reduced several entries relative to vt52. 20508# 9.11.2 (Tue Nov 7 00:21:06 EST 1995): 20509# * Exiled some utterly unidentifiable custom and homebrew types to the 20510# UFO file; also, obsolete small-screen hardware; also, entries which 20511# look flat-out incorrect, garbled, or redundant. These include the 20512# following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec, 20513# tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile, 20514# apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu, 20515# fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55, 20516# yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2, 20517# vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200, 20518# trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40, 20519# att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w, 20520# tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na, 20521# c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na, 20522# regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb, 20523# vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam, 20524# vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms. 20525# * Corrected pcvt25h as suggested by Brian C. Grayson 20526# <bgrayson@pine.ece.utexas.edu>. 20527# 9.11.3 (Thu Nov 9 12:14:40 EST 1995): 20528# * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H. 20529# * Added kent=\EOM to xterm entry. 20530# 20531# 9.11.4 (Fri Nov 10 08:31:35 EST 1995): 20532# * Corrected gigi entry. 20533# * Restored cuf/cud1 to xterm, their apparent bugginess was due to 20534# bad hpa/vpa capabilities. 20535# * Corrected flash strings to have a uniform delay of .2 sec. No 20536# more speed-dependent NUL-padding! 20537# * terminfo capabilities in comments bracketed with <>. 20538# 9.11.5 (Fri Nov 10 15:35:02 EST 1995): 20539# * Replaced pcvt with the 3.31 pcvt entries. 20540# * Freeze for 1.9.7a. 20541# 9.11.6 (Mon Nov 13 10:20:24 EST 1995): 20542# * Added emu entry from the X11R6 contrib tape sources. 20543# 20544# 9.12.0 (Wed Nov 29 04:22:25 EST 1995): 20545# * Improved iris-ansi and sun entries. 20546# * More flash string improvements. 20547# * Corrected wy160 & wy160 as suggested by Robert Dunn 20548# * Added dim to at386. 20549# * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says 20550# he's ready to start using the termcap generated from this one. 20551# * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m, 20552# ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220. 20553# * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925, 20554# att610, att620, att630, 20555# * Changed hazeltine name prefix from h to hz. 20556# * Sent t500 to the UFI file. 20557# * I think we've sucked all the juice out of BSDI's termcap file now. 20558# * Freeze for ncurses 1.9.8 release 20559# 9.12.1 (Thu Nov 30 03:14:06 EST 1995) 20560# * Unfreeze, linux kbs needed to be fixed. 20561# * Tim Theisen pinned down a bug in the DMD firmware. 20562# 9.12.2 (Thu Nov 30 19:08:55 EST 1995): 20563# * Fixes to ansi and klone capabilities (thank you, Aaron Ucko). 20564# (The broken ones had been shadowed by sgr.) 20565# 9.12.3 (Thu Dec 7 17:47:22 EST 1995): 20566# * Added documentation on ECMA-48 standard. 20567# * New Amiga entry. 20568# 9.12.4 (Thu Dec 14 04:16:39 EST 1995): 20569# * More ECMA-48 stuff 20570# * Corrected typo in minix entry, added pc-minix. 20571# * Corrected khome/kend in xterm (thank you again, Aaron Ucko). 20572# * Added rxvt entry. 20573# * Added 1.3.x color-change capabilities to linux entry. 20574# 9.12.5 (Tue Dec 19 00:22:10 EST 1995): 20575# * Corrected rxvt entry khome/kend. 20576# * Corrected linux color change capabilities. 20577# * NeXT entries from Dave Wetzel. 20578# * Cleaned up if and rf file names (all in /usr/share now). 20579# * Changed linux op capability to avoid screwing up a background color 20580# pair set by setterm. 20581# 9.12.6 (Wed Feb 7 16:14:35 EST 1996): 20582# * Added xterm-sun. 20583# 9.12.7 (Fri Feb 9 13:27:35 EST 1996): 20584# * Added visa50. 20585# 20586# 9.13.0 (Sun Mar 10 00:13:08 EST 1996): 20587# * Another sweep through the Shuford archive looking for new info. 20588# * Added dg100 alias to dg6053 based on a comp.terminals posting. 20589# * Added st52 from Per Persson. 20590# * Added eterm from the GNU Emacs 19.30 distribution. 20591# * Freeze for 1.9.9. 20592# 9.13.1 (Fri Mar 29 14:06:46 EST 1996): 20593# * FreeBSD console entries from Andrew Chernov. 20594# * Removed duplicate Atari st52 name. 20595# 9.13.2 (Tue May 7 16:10:06 EDT 1996) 20596# * xterm doesn't actually have ACS_BLOCK. 20597# * Change klone+color setf/setb to simpler forms that can be 20598# translated into termcap. 20599# * Added xterm1. 20600# * Removed mechanically-generated junk capabilities from cons* entries. 20601# * Added color support to bsdos. 20602# 9.13.3 (Thu May 9 10:35:51 EDT 1996): 20603# * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>. 20604# * Created ecma+color, linux can use it. Also added ech to linux. 20605# * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates. 20606# * Add descriptions to FreeBSD console entries. Also shorten 20607# some aliases to <= 14 chars for portability. 20608# * Added x68k console 20609# * Added OTbs to several VT-series entries. 20610# 9.13.4 (Wed May 22 10:54:09 EDT 1996): 20611# * screen entry update for 3.7.1 from Michael Alan Dorman. 20612# 9.13.5 (Wed Jun 5 11:22:41 EDT 1996): 20613# * kterm correction due to Kenji Rikitake. 20614# * ACS correction in vt320-kll due to Phillippe De Muyter. 20615# 9.13.6 (Sun Jun 16 15:01:07 EDT 1996): 20616# * Sun console entry correction from J.T. Conklin. 20617# * Changed all DEC VT300 and up terminals to use VT300 tab set 20618# 9.13.7 (Mon Jul 8 20:14:32 EDT 1996): 20619# * Added smul to linux entry (we never noticed it was missing 20620# because of sgr!). 20621# * Added rmln to hp+labels (deduced from other HP entries). 20622# * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas, 20623# pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3. 20624# * Corrected vt220 acsc. 20625# * The klone+sgr and klone+sgr-dumb entries now use klone+acs; 20626# this corresponds to reality and helps prevent some tic warnings. 20627# * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2, 20628# hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11, 20629# adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200, 20630# qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc, 20631# wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90, 20632# adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p, 20633# f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000, 20634# owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx, 20635# lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25, 20636# dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800, 20637# ifmr, v3220, wy100q, tandem653, ibmaed. 20638# * Added DWK terminal description. 20639# 9.13.8 (Wed Jul 10 11:45:21 EDT 1996): 20640# * Many entries now have highlights inherited from adm+sgr. 20641# * xterm entry now corresponds to XFree86 3.1.2E, with color. 20642# * xtitle and xtitle-twm enable access to the X status line. 20643# * Added linux-1.3.6 color palette caps in conventional format. 20644# * Added adm1178 terminal. 20645# * Move fos and apollo terminals to obsolete category. 20646# * Aha! The BRL terminals file told us what the Iris extensions mean. 20647# * Added, from the BRL termcap file: rt6221, rt6221-w, northstar, 20648# commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file: 20649# cit500, adm11. 20650# 9.13.9 (Mon Jul 15 00:32:51 EDT 1996): 20651# * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756, 20652# aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155. 20653# * Corrected, from BRL termcap file: vi50. 20654# * Better rxvt entry & corrected xterm entries from Thomas Dickey. 20655# 9.13.10 (Mon Jul 15 12:20:13 EDT 1996): 20656# * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1, 20657# att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne 20658# (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi, 20659# tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro, 20660# apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae. 20661# * Paired-attribute fixes to various terminals. 20662# * Sun entry corrections from A. Lukyanov & Gert-Jan Vons. 20663# * xterm entry corrections from Thomas Dickey. 20664# 9.13.11 (Tue Jul 30 16:42:58 EDT 1996): 20665# * Added t916 entry, translated from a termcap in SCO's support area. 20666# * New qnx entry from Michael Hunter. 20667# 9.13.12 (Mon Aug 5 14:31:11 EDT 1996): 20668# * Added hpex2 from Ville Sulko. 20669# * Fixed a bug that ran the qnx and pcvtXX together. 20670# 9.13.13 (Fri Aug 9 01:16:17 EDT 1996): 20671# * Added dtterm entry from Solaris CDE. 20672# 9.13.14 (Tue Sep 10 15:31:56 EDT 1996): 20673# * corrected pairs#8 typo in dtterm entry. 20674# * added tvi9065. 20675# 9.13.15 (Sun Sep 15 02:47:05 EDT 1996): 20676# * updated xterm entry to cover 3.1.2E's new features. 20677# 9.13.16 (Tue Sep 24 12:47:43 EDT 1996): 20678# * Added new minix entry 20679# * Removed aliases of the form ^[0-9]* for obsolete terminals. 20680# * Commented out linux-old, nobody's using pre-1.2 kernels now. 20681# 9.13.17 (Fri Sep 27 13:25:38 EDT 1996): 20682# * Added Prism entries and kt7ix. 20683# * Caution notes about EWAN and tabset files. 20684# * Changed /usr/lib/tabset -> /usr/share/tabset. 20685# * Added acsc/rmacs/smacs to vt52. 20686# 9.13.18 (Mon Oct 28 13:24:59 EST 1996): 20687# * Merged in Thomas Dickey's reorganization of the xterm entries; 20688# added technical corrections to avoid warning messages. 20689# 9.13.19 (Sat Nov 16 16:05:49 EST 1996): 20690# * Added rmso=\E[27m in Linux entry. 20691# * Added koi8-r support for Linux console. 20692# * Replace xterm entries with canonical ones from XFree86 3.2. 20693# 9.13.20 (Sun Nov 17 23:02:51 EST 1996): 20694# * Added color_xterm from Jacob Mandelson 20695# 9.13.21 (Mon Nov 18 12:43:42 EST 1996): 20696# * Back off the xterm entry to use r6 as a base. 20697# 9.13.22 (Sat Nov 30 11:51:31 EST 1996): 20698# * Added dec-vt220 at Adrian Garside's request. 20699# 9.13.23 (Fri Feb 21 16:36:06 EST 1997): 20700# * Replaced minitel-2 entry. 20701# * Added MGR, ansi-nt. 20702# * Minor corrections to xterm entries. 20703# * Replaced EWAN telnet entry. 20704# * Dropped the reorder script generator. It was a fossil. 20705# 9.13.24 (Sun Feb 23 20:55:23 EST 1997): 20706# * Thorsten Lockert added termcap `bs' to a lot of types, working from 20707# the 4.4BSD Lite2 file. 20708# 9.13.25 (Fri Jun 20 12:33:36 EDT 1997): 20709# * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js. 20710# * Updated iris-ansi; corrected vt102-w. 20711# * Switch base xterm entry to 3.3 level. 20712# 9.13.26 (Mon Jun 30 22:45:45 EDT 1997) 20713# * Added basic4. 20714# * Removed rmir/smir from tv92B. 20715# 20716# 10.2.0 (Sat Feb 28 12:47:36 EST 1998): 20717# * add hds200 description (Walter Skorski) 20718# * add beterm entry (Fred Fish) 20719# * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color, 20720# iris-color entries. 20721# * add emx entries. 20722# * Replaced unixpc entry with Benjamin Sittler's corrected version. 20723# * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's 20724# versions. 20725# * remove sgr string from qnx based on report by Xiaodan Tang 20726# * Added u8/u9, removed rmul/smul from sun-il. 20727# * 4.2 tic displays \0 rather than \200. 20728# * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc, 20729# apparently based on cp-866). 20730# * Merged in Pavel Roskin's acsc for linux-koi8 20731# * Corrected some erroneous \\'s to \. 20732# * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV. 20733# * II -> ii in pcvtXX, screen, xterm. 20734# * Removed \n chars following ANSI escapes in sgr & friends. 20735# * Updated Wyse entries. 20736# * h19 corrections from Tim Pierce. 20737# * Noted that the dm2500 has both ich and smir. 20738# * added pccons for the Alpha under OSF/1. 20739# * Added Sony NEWS workstation entries and cit101e-rv. 20740# * Reverted `amiga'; to Kent Polk's version, as I'm told 20741# the Verkuil entry messes up with Amiga Telnet. 20742# 10.2.1 (Sun Mar 8 18:32:04 EST 1998): 20743# * Corrected attributions in 10.2.0 release notes. 20744# * Scanned the Shuford archive for new terminfos and information. 20745# * Removed sgr from qnx entry (Thomas Dickey). 20746# * Added entries for ICL and Kokusai Data Systems terminals. 20747# * Incorporated NCR terminfos from the Boundless Technology FTP site. 20748# * Incorporated att700 from the Boundless Technology FTP site. 20749# * Miscellaneous contact-address and Web-page updates. 20750# 20751# 1998/5/9 20752# * add nxterm and xterm-color terminfo description (request by Cristian 20753# Gafton <gafton@redhat.com>). 20754# * modify rxvt terminfo description to clear alternate screen before 20755# switching back to normal screen, for compatibility with applications 20756# which use xterm (reported by Manoj Kasichainula <manojk@io.com>). 20757# * modify linux terminfo description to reset color palette (reported 20758# by Telford Tendys <telford@eng.uts.edu.au>). 20759# 20760# 1998/7/4 20761# * merge changes from current XFree86 xterm terminfo descriptions. 20762# 20763# 1998/7/25 20764# * Added minitel1 entries from Alexander Montaron. 20765# * Added qnxt2 from Federico Bianchi. 20766# * Added arm100 terminfo entries from Dave Millen. 20767# 20768# 1998/8/6 20769# * Added ncsa telnet entries from Francesco Potorti 20770# 20771# 1998/8/15 20772# * modify ncsa telnet entry to reflect color, other capabilities based on 20773# examination of the source code - T.Dickey. 20774# 20775# 1998/8/22 20776# * Corrected some erroneous \\'s to \ (eterm, osborne) - TD. 20777# 20778# 1998/8/29 20779# * Added Francesco Potorti's tuned Wyse 99 entries. 20780# * dtterm enacs correction from Alexander V. Lukyanov. 20781# * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version. 20782# * correct a typo in icl6404 entry. 20783# * add xtermm and xtermc 20784# 20785# 1998/9/26 20786# * format most %'char' sequences to %{number} 20787# * adapt IBM AIX 3.2.5 terminfo - T.Dickey 20788# * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD 20789# 20790# 1998/10/10 20791# * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD 20792# * correct initialization string in xterm-r5, add misc other features 20793# to correspond with xterm patch 84 - TD 20794# 20795# 1998/12/19 20796# * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD 20797# * add Mathew Vernon's mach console entries 20798# * corrections for ncsa function-keys (report by Larry Virden) 20799# 20800# 1998/12/19 20801# * change linux to use ncv#2, since underline does not work with color - TD 20802# 20803# 1999/1/9 20804# * add kbt to iris-ansi, document other shift/control functionkeys - TD 20805# * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad 20806# application modes, change kent to use the correct keypad code - TD 20807# 20808# 1999/1/10 20809# * add entry for Tera Term - TD 20810# 20811# 1999/1/23 20812# * minor improvements for teraterm entry - TD 20813# * rename several entries used by BSDI: bsdos to bsdos-pc-nobold, 20814# and bsdos-bold to bsdos-pc (Jeffrey C Honig) 20815# 20816# 1999/2/20 20817# * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in 20818# xterm and ncsa entries by removing the unneeded ones. Note that 20819# some entries will return kend & khome versus kslt and kfnd, for 20820# PC-style keyboards versus strict vt220 compatiblity - TD 20821# 20822# 1999/3/13 20823# * adjust xterm-xfree86 khome/kend to match default PC-style keyboard 20824# tables - TD 20825# * add 'crt' entry - TD 20826# * correct typos in 'linux-c' entry - TD 20827# 20828# 1999/3/14 20829# * update entries for BSD/OS console to use klone+sgr and klone+color 20830# (Jeffrey C Honig) 20831# 20832# 1999/3/27 20833# * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD. 20834# 20835# 1999/4/10 20836# * add linux-lat, from RedHat patches to ncurses 4.2 20837# 20838# 1999/4/17 20839# * add complete set of default function-key definitions for scoansi - TD. 20840# 20841# 1999/7/3 20842# * add cnorm, cvvis for Linux 2.2 kernels 20843# 20844# 1999/7/24 20845# * add kmous to xterm-r5 -TD 20846# * correct entries xterm+sl and xterm+sl-twm, which were missing the 20847# parent "use" clause -TD 20848# 20849# 1999/7/31 20850# * corrected cnorm, added el1 in 'screen' description -TD 20851# 20852# 1999/8/14 20853# * add ms-vt100 -TD 20854# 20855# 1999/8/21 20856# * corrections to beterm entry -TD 20857# 20858# 1999/8/28 20859# * add cygwin entry -TD 20860# 20861# 1999/9/4 20862# * minor corrections for beterm entry -TD 20863# 20864# 1999/9/18 20865# * add acsc string to HP 70092 terminfo entry -Joerg Wunsch 20866# 20867# 1999/9/25 20868# * add amiga-8bit entry 20869# * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons, 20870# rcons-color, based on 20871# ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src 20872# * add alias for iris-ansi-net 20873# 20874# 1999/10/2 20875# * corrected scoansi entry's acsc, some function keys, add color -TD 20876# 20877# 1999/10/23 20878# * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD 20879# * reorder ncsa entries to make ncsa-vt220 use the alternate function 20880# key mapping, leaving Potorti's entries more like he named them -TD 20881# * remove enter/exit am-mode from cygwin -TD 20882# 20883# 1999/10/30 20884# * correct typos in several entries (missing '[' from CSI): 20885# mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir 20886# strings for avt-ns -TD 20887# * add 'dim' to ncv mask for linux (report by Klaus Weide). 20888# 20889# 1999/11/27 20890# * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD 20891# * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD 20892# * add xterm-88color and xterm-256color -TD 20893# 20894# 1999/12/4 20895# * add "obsolete" termcap strings -TD 20896# * add kvt and gnome entries -TD 20897# 20898# 1999/12/11 20899# * correct cup string for regent100 -TD 20900# 20901# 2000/1/1 20902# * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD 20903# * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD 20904# * change OTrs capabilities to rs2 -TD 20905# * add obsolete and extended capabilities to 'screen' -TD 20906# 20907# 2000/1/5 20908# * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts 20909# with kf10 -TD 20910# * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove', 20911# and adding kcbt -TD 20912# 20913# 2000/1/12 20914# * remove incorrect khome/kend from xterm-xf86-v333, which was based on 20915# nonstandard resource settings -TD 20916# 20917# 2000/2/26 20918# * minor fixes for xterm-*, based on Debian #58530 -TD 20919# 20920# 2000/3/4 20921# * add several terminal types from esr's "11.0", as well as comments. 20922# bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*, 20923# vt220-8bit, vt220-old, wy85-8bit 20924# 20925# 2000/3/18 20926# * add several terminal types from esr's "11.0.1" (ansi-*). 20927# * update OTxx capabilities for changes on 2000/3/4. 20928# * revert part of vt220 change (request by Todd C Miller for OpenBSD) 20929# 20930# 2000/3/26 20931# * move screen's AX extension to ecma+color, modify several entries to 20932# use that, adjusting ncv as needed -TD 20933# 20934# 2000/4/8 20935# * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig) 20936# * correct spelling error in entry name: bq300-rv was given as bg300-rv 20937# in esr's version. 20938# 20939# 2000/4/15 20940# * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD 20941# * correct color definition for ibm3164, make minor changes to other 20942# IBM terminal definitions based on recent terminfo descriptions -TD 20943# 20944# 2000/4/22 20945# * add mgterm, from NetBSD -TD 20946# * add alias sun-cgsix for sun-ss5 as per NetBSD 20947# * change cons25w to use rs2 for reset rather than rs1 -TD 20948# * add rc/sc to aixterm based on manpage -TD 20949# 20950# 2000/5/13 20951# * remove ncv from xterm-16color, xterm-256color 20952# 20953# 2000/6/10 20954# * add kmous capability to linux to use Joerg Schoen's gpm patch. 20955# 20956# 2000/7/1 20957# * add Eterm (Michael Jennings) 20958# 20959# 2000-07-18 20960# * add amiga-vnc entry. 20961# 20962# 2000-08-12 20963# * correct description of Top Gun Telnet. 20964# * add kterm-color 20965# 20966# 2000-08-26 20967# * add qansi* entries from QNX ftp site. 20968# 20969# 2000-09-16 20970# * add Matrix Orbital entries by Eric Z. Ayers). 20971# * add xterm-basic, xterm-sco entries, update related entries to XFree86 20972# 4.0.1c -TD 20973# 20974# 2000-09-17 20975# * add S0, E0 extensions to screen's entry -TD 20976# 20977# 2000-09-23 20978# * several corrections based on tic's new parameter-checking code -TD 20979# * modify xterm-r6 and similar rs2 sequences which had \E7...\E8 20980# bracketing sequences that reset video attributes (\E8 would restore 20981# them) -TD 20982# 20983# 2000-11-11 20984# * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD 20985# 20986# 2000-12-16 20987# * improved scoansi, based on SCO man-page, and testing console, 20988# scoterm with tack -TD 20989# 20990# 2001-01-27 20991# * modify kterm to use acsc via SCS controls. 20992# 20993# 2001-02-10 20994# * screen 3.9.8 allows xterm mouse controls to pass-through 20995# 20996# 2001-03-11 20997# * remove spurious "%|" from some xterm entries. 20998# 20999# 2001-03-31 21000# * modify 'screen' khome/kend to match screen 3.09.08 21001# * add examples of 'screen' customization (screen.xterm-xfree86, 21002# screen.xterm-r6, screen.teraterm) -TD 21003# 21004# 2001-04-14 21005# * correct definitions of shifted editing keys for xterm-xfree86 -TD 21006# * add "Apple_Terminal" entries -Benjamin Sittler 21007# * remove time-delays from "Apple_Terminal" entries -TD 21008# * make sgr entries time-delays consistent with individual caps -TD 21009# 21010# 2001-05-05 21011# * corrected/updated screen.xterm-xfree86 21012# 21013# 2001-05-19 21014# * ELKS descriptions, from Federico Bianchi 21015# * add u6 (CSR) to Eterm (Michael Jennings). 21016# 21017# 2001-07-21 21018# * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's 21019# tic which handles names no longer than 14 characters. Add 21020# corresponding descriptions for the Darwin PowerPC console named 21021# "xnuppc" -Benjamin Sittler 21022# 21023# 2001-09-01 21024# * change kbs in mach entries to ^? (Marcus Brinkmann). 21025# 21026# 2001-11-17 21027# * add "putty" entry -TD 21028# * updated "Apple_Terminal" entries -Benjamin Sittler 21029# 21030# 2001-11-24 21031# * add ms-vt100-color entry -TD 21032# * add "konsole" entries -TD 21033# 21034# 2001-12-08 21035# * update gnome entry to Redhat 7.2 -TD 21036# 21037# 2002-05-25 21038# * add kf13-kf48 strings to cons25w -TD 21039# * add pcvt25-color entry -TD 21040# * changed a few /usr/lib/tabset -> /usr/share/tabset. 21041# * improve some features of scoansi entry based on SCO's version -TD 21042# * add scoansi-new entry corresponding to OpenServer 5.0.6 21043# 21044# 2002-06-15 21045# * add kcbt to screen entry -TD 21046# 21047# 2002-06-22 21048# * add rxvt-16color, ibm+16color, mvterm entries -TD 21049# 21050# 2002-09-28 21051# * split out linux-basic entry, making linux-c inherit from that, and 21052# in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect 21053# the history of this console type -TD 21054# * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the 21055# r/g/b parameters of initc are in the range 0 to 1000 -TD 21056# 21057# 2002-10-05 21058# * minor fix for scale-factor of linux-c and linux-c-nc -TD 21059# 21060# 2002-11-09 21061# * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2 21062# in the latter -TD 21063# 21064# 2002-11-16 21065# * add entries for mterm (mterm, mterm-ansi, decansi) -TD 21066# * ncr260wy350pp has only 16 color pairs -TD 21067# * add sun-type4 from NetBSD -TD 21068# * update xterm-xfree86 to current (patch 170) -TD 21069# * add screen-bce, screen-s entries -TD 21070# * add xterm-1002, xterm-1003 entries -TD 21071# 21072# 2003-01-11 21073# * update homepage for Top Gun Telnet/SSH 21074# 21075# 2003-01-25 21076# * reduce duplication in emx entries, added emx-base -TD 21077# 21078# 2003-05-24 21079# * corrected acs for screen.teraterm -TD 21080# * add tkterm entry -TD 21081# 21082# 2003-07-15 21083# * cygwin changes from Charles Wilson: 21084# misc/terminfo.src (nxterm|xterm-color): make xterm-color 21085# primary instead of nxterm, to match XFree86's xterm.terminfo 21086# usage and to prevent circular links. 21087# (rxvt): add additional codes from rxvt.org. 21088# (rxvt-color): new alias 21089# (rxvt-xpm): new alias 21090# (rxvt-cygwin): like rxvt, but with special acsc codes. 21091# (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or 21092# with a "native" MSWin GUI. Each takes different acsc codes, 21093# which are both different from the "normal" rxvt's acsc. 21094# (cygwin): cygwin-in-cmd.exe window. Lots of fixes. 21095# (cygwinDBG): ditto. 21096# 21097# 2003-09-27 21098# * update gnome terminal entries -TD 21099# 21100# 2003-10-04 21101# * add entries for djgpp 2.03 and 2.04 -TD 21102# 21103# 2003-10-25 21104# * add alias for vtnt -TD 21105# * update xterm-xfree86 for XFree86 4.4 -TD 21106# 21107# 2003-11-22 21108# * add linux-vt (Andrey V Lukyanov) 21109# 21110# 2003-12-20 21111# * add screen.linux -TD 21112# 21113# 2004-01-10 21114# * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler) 21115# 21116# 2004-01-17 21117# * add OpenNT/Interix/SFU entries (Federico Bianchi) 21118# * add vt100+ and vt-utf8 entries -TD 21119# * add uwin entry -TD 21120# 21121# 2004-03-27 21122# * add sgr strings to several common entries lacking them, e.g., 21123# screen, to make the entries more portable -TD 21124# * remove cvvis from rxvt entry, since it is the same as cnorm -TD 21125# * similar fixups for cvvis/cnorm various entries -TD 21126# 21127# 2004-05-22 21128# * remove 'ncv' from xterm-256color (patch 188) -TD 21129# 21130# 2004-06-26 21131# * add mlterm -TD 21132# * add xterm-xf86-v44 -TD 21133# * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies 21134# on G1 being used via an ISO-2022 escape sequence (report by 21135# Juliusz Chroboczek) -TD 21136# * add 'hurd' entry -TD 21137# 21138# 2004-07-03 21139# * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than 21140# xterm-basic -TD 21141# * align with xterm #192's use of xterm-new -TD 21142# * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD 21143# * make xterm-new the default "xterm" -TD 21144# 21145# 2004-07-10 21146# * minor fixes for emu -TD 21147# * add emu-220 21148# * add rmam/smam to linux (Trevor Van Bremen) 21149# * change wyse acsc strings to use 'i' map rather than 'I' -TD 21150# * fixes for avatar0 -TD 21151# * fixes for vp3a+ -TD 21152# 21153# 2004-07-17 21154# * add xterm-pc-fkeys -TD 21155# * review/update gnome and gnome-rh90 entries (prompted by 21156# Redhat Bugzilla #122815) -TD 21157# * review/update konsole entries -TD 21158# * add sgr, correct sgr0 for kterm and mlterm -TD 21159# * correct tsl string in kterm -TD 21160# 21161# 2004-07-24 21162# * make ncsa-m rmacs/smacs consistent with sgr -TD 21163# * add sgr, rc/sc and ech to syscons entries -TD 21164# * add function-keys to decansi -TD 21165# * add sgr to mterm-ansi -TD 21166# * add sgr, civis, cnorm to emu -TD 21167# * correct/simplify cup in addrinfo -TD 21168# * corrections for gnome and konsole entries 21169# (Redhat Bugzilla #122815) -Hans de Goede 21170# * modify DEC entries (vt220, etc), to add sgr string, and to use 21171# ISO-2022 strings for rmacs/smacs -TD 21172# 21173# 2004-07-31 21174# * rename xterm-pc-fkeys to xterm+pcfkeys -TD 21175# 21176# 2004-08-07 21177# * improved putty entry -Robert de Bath 21178# 21179# 2004-08-14 21180# * remove dch/dch1 from rxvt because they are implemented inconsistently 21181# with the common usage of bce/ech -TD 21182# * remove khome from vt220 (vt220's have no home key) -TD 21183# * add rxvt+pcfkeys -TD 21184# 21185# 2004-08-21 21186# * modify several entries to ensure xterm mouse and cursor visibility 21187# are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm, 21188# Eterm, screen. (The xterm entries are left alone - old ones for 21189# compatibility, and the new ones do not require this change) -TD 21190# 21191# 2004-08-28 21192# * add morphos entry -Pavel Fedin 21193# * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin 21194# * corrected \E[5?l to \E[?5l in vt320 entries -TD 21195# 21196# 2004-11-20 21197# * update wsvt25 entry -TD 21198# 21199# 2005-01-29 21200# * update pairs for xterm-88color and xterm-256color to reflect the 21201# ncurses extended-color support -TD 21202# 21203# 2005-02-26 21204# * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD 21205# * add aixterm-16color to demonstrate 16-color capability -TD 21206# 21207# 2005-04-23 21208# * add media-copy to vt100 -TD 21209# * corrected acsc string for vt52 -TD 21210# 21211# 2005-04-30 21212# * add kUP, kDN (user-defined shifted up/down arrow) definitions for 21213# xterm-new -TD 21214# * add kUP5, kUP6, etc., for xterm-new and rxvt -TD 21215# 21216# 2005-05-07 21217# * re-corrected acsc string for vt52 -TD 21218# 21219# 2005-05-28 21220# * corrected sun-il sgr string which referred to bold and underline -TD 21221# * add sun-color entry -TD 21222# 21223# 2005-07-23 21224# * modify sgr0 in several entries to reset alternate-charset as in the 21225# sgr string -TD 21226# * modify sgr string of prism9 to better match the individual 21227# attributes -TD 21228# 21229# 2005-10-15 21230# * correct order of use= in rxvt-basic -TD 21231# 21232# 2005-10-26 21233# * use kind/kri as shifted up/down cursor keys for xterm-new -TD 21234# 21235# 2005-11-12 21236# * other minor fixes to cygwin based on tack -TD 21237# * correct smacs in cygwin (report by Baurzhan Ismagulov). 21238# 21239# 2006-02-18 21240# * add nsterm-16color entry -TD 21241# * remove ncv flag from xterm-16color -TD 21242# * remove setf/setb from xterm-256color to match xterm #209 -TD 21243# * update mlterm entry to 2.9.2 -TD 21244# 21245# 2006-02-25 21246# * fixes to make nsterm-16color match report 21247# by Christian Ebert -Alain Bench 21248# 21249# 2006-04-22 21250# * add xterm+256color building block -TD 21251# * add gnome-256color, putty-256color, rxvt-256color -TD 21252# 21253# 2006-05-06 21254# * add hpterm-color -TD 21255# 21256# 2006-06-24 21257# * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD 21258# * add gnome-fc5 (prompted by GenToo #122566) -TD 21259# * remove obsolete/misleading comments about kcbt on Linux -Alain Bench 21260# * improve xterm-256color by combining the ibm+16color setaf/setab 21261# strings with SGR 48. The setf/setb strings also are cancelled here 21262# rather than omitted so derived entries will cancel those also -Alain 21263# Bench 21264# 21265# 2006-07-01 21266# * add some notes regarding copyright to terminfo.src -TD 21267# * use rxvt+pcfkeys in Eterm -TD 21268# * remove km and flash from gnome, Eterm and rxvt since they do not work 21269# as one would expect (km sends ESC rather than setting the 8th bit 21270# of the key) -TD 21271# * add/use ansi+enq, vt100+enq and vt102+enq -TD 21272# * add konsole-solaris -TD 21273# 21274# 2006-07-22 21275# * update xterm-sun and xterm-sco entries to match xterm #216 -TD 21276# * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD 21277# * modify xterm-24 to inherit from "xterm" -TD 21278# * add xiterm entry -TD 21279# * add putty-vt100 entry -TD 21280# * corrected spelling of Michael A Dorman's name, prompted by 21281# http://www.advogato.org/person/mdorman/diary.html -TD 21282# 21283# 2006-08-05 21284# * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD 21285# * update xterm+pcfkeys to match xterm #216 -TD 21286# 21287# 2006-08-17 21288# * make descriptions of xterm entries consistent with its terminfo -TD 21289# 21290# 2006-08-26 21291# * add xfce, mgt -TD 21292# 21293# 2006-09-02 21294# * correct acsc string in kterm -TD 21295# 21296# 2006-09-09 21297# * add kon entry -TD 21298# * remove invis from linux and related entries, add klone+sgr8 for those 21299# that implement the feature (or have not been shown to lack it) -TD 21300# 21301# 2006-09-23 21302# * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD 21303# * minor improvements to rxvt+pcfkeys -TD 21304# 21305# 2006-09-30 21306# * fix a few typos in if/then/else expressions -TD 21307# 21308# 2006-10-07 21309# * add several GNU Screen variations with 16- and 256-colors, and 21310# status line (Alain Bench). 21311# 21312# The following sets edit modes for GNU EMACS. 21313# Local Variables: 21314# fill-prefix:"\t" 21315# fill-column:75 21316# comment-column:0 21317# comment-start-skip:"^#+" 21318# comment-start:"# " 21319# compile-command:"tic -c terminfo.master" 21320# End: 21321######## SHANTIH! SHANTIH! SHANTIH! 21322