1# $NetBSD: t_rfc4182.sh,v 1.4 2016/08/10 07:50:37 ozaki-r Exp $
2#
3# Copyright (c) 2013 The NetBSD Foundation, Inc.
4# All rights reserved.
5#
6# Redistribution and use in source and binary forms, with or without
7# modification, are permitted provided that the following conditions
8# are met:
9# 1. Redistributions of source code must retain the above copyright
10#    notice, this list of conditions and the following disclaimer.
11# 2. Redistributions in binary form must reproduce the above copyright
12#    notice, this list of conditions and the following disclaimer in the
13#    documentation and/or other materials provided with the distribution.
14#
15# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
16# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
17# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
18# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
19# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
20# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
21# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
22# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
23# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
24# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
25# POSSIBILITY OF SUCH DAMAGE.
26#
27
28# TEST RFC 4182
29# Setup four routers connected like this: R1---R2---R3---R4--
30# Goal is to be able to ping from R1 the outermost interface of R4
31# Disable net.inet.ip.forwarding, enable net.mpls.forwarding
32# Add route on R1 in order to encapsulate into MPLS the IP packets with
33#     destination equal to R4 right hand side interface. Use two labels here:
34#     25 and IPv6 Explicit NULL
35# Add a double tagged MPLS route on R2 in order to forward frames belonging to
36#     that FEC to R3, with IPv4 NULL being the most outermost one
37# Add MPLS "POP" route on R3 for that FEC, pointing to R4
38# Do the same for the reverse direction (R4 to R1)
39# ping from R1 to R4 right hand side interface
40
41
42RUMP_SERVER1=unix://./r1
43RUMP_SERVER2=unix://./r2
44RUMP_SERVER3=unix://./r3
45RUMP_SERVER4=unix://./r4
46
47RUMP_FLAGS="-lrumpnet -lrumpnet_net -lrumpnet_netinet	\
48            -lrumpdev -lrumpnet_netmpls -lrumpnet_shmif"
49
50atf_test_case rfc4182 cleanup
51rfc4182_head()
52{
53
54	atf_set "descr" "RFC 4182 conformance test"
55	atf_set "require.progs" "rump_server"
56}
57
58startservers()
59{
60
61	ulimit -r 300
62	atf_check -s exit:0 rump_server ${RUMP_FLAGS} ${RUMP_SERVER1}
63	atf_check -s exit:0 rump_server ${RUMP_FLAGS} ${RUMP_SERVER2}
64	atf_check -s exit:0 rump_server ${RUMP_FLAGS} ${RUMP_SERVER3}
65	atf_check -s exit:0 rump_server ${RUMP_FLAGS} ${RUMP_SERVER4}
66}
67
68configservers()
69{
70
71	# Setup the first server
72	export RUMP_SERVER=${RUMP_SERVER1}
73	atf_check -s exit:0 rump.ifconfig shmif0 create
74	atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom1
75	atf_check -s exit:0 rump.ifconfig shmif0 10.0.1.1/24
76	atf_check -s exit:0 rump.ifconfig mpls0 create up
77	atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1
78	atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0
79	atf_check -s exit:0 rump.route -q add 10.0.4.0/24 -ifa 10.0.1.1 \
80	    -ifp mpls0 -tag 25,2 -inet 10.0.1.2
81
82	# Setup the second server
83	export RUMP_SERVER=${RUMP_SERVER2}
84	atf_check -s exit:0 rump.ifconfig shmif0 create
85	atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom1
86	atf_check -s exit:0 rump.ifconfig shmif0 10.0.1.2/24
87	atf_check -s exit:0 rump.ifconfig shmif1 create
88	atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom2
89	atf_check -s exit:0 rump.ifconfig shmif1 10.0.2.1/24
90	atf_check -s exit:0 rump.ifconfig mpls0 create up
91	atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1
92	atf_check -s exit:0 rump.sysctl -q -w net.mpls.forwarding=1
93	atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0
94	atf_check -s exit:0 rump.route -q add -mpls 25 -tag 30,0 -inet 10.0.2.2
95	atf_check -s exit:0 rump.route -q add -mpls 27 -tag 3 -inet 10.0.1.1
96
97	# Setup the third server
98	export RUMP_SERVER=${RUMP_SERVER3}
99	atf_check -s exit:0 rump.ifconfig shmif0 create
100	atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom2
101	atf_check -s exit:0 rump.ifconfig shmif0 10.0.2.2/24
102	atf_check -s exit:0 rump.ifconfig shmif1 create
103	atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom3
104	atf_check -s exit:0 rump.ifconfig shmif1 10.0.3.1/24
105	atf_check -s exit:0 rump.ifconfig mpls0 create up
106	atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1
107	atf_check -s exit:0 rump.sysctl -q -w net.mpls.forwarding=1
108	atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0
109	atf_check -s exit:0 rump.route -q add -mpls 30 -tag 3 -inet 10.0.3.2
110	atf_check -s exit:0 rump.route -q add -mpls 26 -tag 27,0 -inet 10.0.2.1
111
112	# Setup the fourth server
113	export RUMP_SERVER=${RUMP_SERVER4}
114	atf_check -s exit:0 rump.ifconfig shmif0 create
115	atf_check -s exit:0 rump.ifconfig shmif0 linkstr ./shdom3
116	atf_check -s exit:0 rump.ifconfig shmif0 10.0.3.2/24
117	atf_check -s exit:0 rump.ifconfig shmif1 create
118	atf_check -s exit:0 rump.ifconfig shmif1 linkstr ./shdom4
119	atf_check -s exit:0 rump.ifconfig shmif1 10.0.4.1/24
120	atf_check -s exit:0 rump.ifconfig mpls0 create up
121	atf_check -s exit:0 rump.sysctl -q -w net.mpls.accept=1
122	atf_check -s exit:0 rump.sysctl -q -w net.inet.ip.forwarding=0
123	atf_check -s exit:0 rump.route -q add 10.0.1.0/24 -ifa 10.0.3.2 \
124	    -ifp mpls0 -tag 26 -inet 10.0.3.1
125
126	unset RUMP_SERVER
127}
128
129doping()
130{
131
132	export RUMP_SERVER=${RUMP_SERVER1}
133	atf_check -s exit:0 -o match:"64 bytes from 10.0.4.1: icmp_seq=" \
134	    rump.ping -n -o -w 5 10.0.4.1
135	unset RUMP_SERVER
136}
137
138docleanup()
139{
140
141	RUMP_SERVER=${RUMP_SERVER1} rump.halt
142	RUMP_SERVER=${RUMP_SERVER2} rump.halt
143	RUMP_SERVER=${RUMP_SERVER3} rump.halt
144	RUMP_SERVER=${RUMP_SERVER4} rump.halt
145}
146
147rfc4182_body()
148{
149
150	startservers
151	configservers
152	doping
153}
154
155rfc4182_cleanup()
156{
157
158	docleanup
159}
160
161atf_init_test_cases()
162{
163
164	atf_add_test_case rfc4182
165}
166