xref: /freebsd/contrib/ntp/sntp/Makefile.in (revision 4e8d558c) 
1# Makefile.in generated by automake 1.16.5 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2021 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17# we traditionally installed software in bindir, while it should have gone
18# in sbindir.  Now that we offer a choice, look in the "other" installation
19# subdir to warn folks if there is another version there.
20
21
22
23
24VPATH = @srcdir@
25am__is_gnu_make = { \
26  if test -z '$(MAKELEVEL)'; then \
27    false; \
28  elif test -n '$(MAKE_HOST)'; then \
29    true; \
30  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
31    true; \
32  else \
33    false; \
34  fi; \
35}
36am__make_running_with_option = \
37  case $${target_option-} in \
38      ?) ;; \
39      *) echo "am__make_running_with_option: internal error: invalid" \
40              "target option '$${target_option-}' specified" >&2; \
41         exit 1;; \
42  esac; \
43  has_opt=no; \
44  sane_makeflags=$$MAKEFLAGS; \
45  if $(am__is_gnu_make); then \
46    sane_makeflags=$$MFLAGS; \
47  else \
48    case $$MAKEFLAGS in \
49      *\\[\ \	]*) \
50        bs=\\; \
51        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
52          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
53    esac; \
54  fi; \
55  skip_next=no; \
56  strip_trailopt () \
57  { \
58    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
59  }; \
60  for flg in $$sane_makeflags; do \
61    test $$skip_next = yes && { skip_next=no; continue; }; \
62    case $$flg in \
63      *=*|--*) continue;; \
64        -*I) strip_trailopt 'I'; skip_next=yes;; \
65      -*I?*) strip_trailopt 'I';; \
66        -*O) strip_trailopt 'O'; skip_next=yes;; \
67      -*O?*) strip_trailopt 'O';; \
68        -*l) strip_trailopt 'l'; skip_next=yes;; \
69      -*l?*) strip_trailopt 'l';; \
70      -[dEDm]) skip_next=yes;; \
71      -[JT]) skip_next=yes;; \
72    esac; \
73    case $$flg in \
74      *$$target_option*) has_opt=yes; break;; \
75    esac; \
76  done; \
77  test $$has_opt = yes
78am__make_dryrun = (target_option=n; $(am__make_running_with_option))
79am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
80pkgdatadir = $(datadir)/@PACKAGE@
81pkgincludedir = $(includedir)/@PACKAGE@
82pkglibdir = $(libdir)/@PACKAGE@
83pkglibexecdir = $(libexecdir)/@PACKAGE@
84am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
85install_sh_DATA = $(install_sh) -c -m 644
86install_sh_PROGRAM = $(install_sh) -c
87install_sh_SCRIPT = $(install_sh) -c
88INSTALL_HEADER = $(INSTALL_DATA)
89transform = $(program_transform_name)
90NORMAL_INSTALL = :
91PRE_INSTALL = :
92POST_INSTALL = :
93NORMAL_UNINSTALL = :
94PRE_UNINSTALL = :
95POST_UNINSTALL = :
96build_triplet = @build@
97host_triplet = @host@
98EXTRA_PROGRAMS = sntp$(EXEEXT)
99@BUILD_LIBEVENT_TRUE@am__append_1 = libevent
100@BUILD_LIBEVENT_FALSE@am__append_2 = "--enable-local-libevent"
101@NEED_LIBOPTS_TRUE@am__append_3 = libopts
102@BUILD_SNTP_TRUE@am__append_4 = tests
103subdir = .
104ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
105am__aclocal_m4_deps = $(top_srcdir)/libopts/m4/libopts.m4 \
106	$(top_srcdir)/libopts/m4/stdnoreturn.m4 \
107	$(top_srcdir)/m4/hms_search_lib.m4 $(top_srcdir)/m4/libtool.m4 \
108	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
109	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
110	$(top_srcdir)/m4/ntp_cacheversion.m4 \
111	$(top_srcdir)/m4/ntp_compiler.m4 \
112	$(top_srcdir)/m4/ntp_crosscompile.m4 \
113	$(top_srcdir)/m4/ntp_debug.m4 $(top_srcdir)/m4/ntp_dir_sep.m4 \
114	$(top_srcdir)/m4/ntp_facilitynames.m4 \
115	$(top_srcdir)/m4/ntp_harden.m4 $(top_srcdir)/m4/ntp_ipv6.m4 \
116	$(top_srcdir)/m4/ntp_lib_m.m4 $(top_srcdir)/m4/ntp_libevent.m4 \
117	$(top_srcdir)/m4/ntp_libntp.m4 \
118	$(top_srcdir)/m4/ntp_lineeditlibs.m4 \
119	$(top_srcdir)/m4/ntp_locinfo.m4 \
120	$(top_srcdir)/m4/ntp_openssl.m4 \
121	$(top_srcdir)/m4/ntp_pkg_config.m4 \
122	$(top_srcdir)/m4/ntp_prog_cc.m4 $(top_srcdir)/m4/ntp_sntp.m4 \
123	$(top_srcdir)/m4/ntp_sysexits.m4 \
124	$(top_srcdir)/m4/ntp_unitytest.m4 \
125	$(top_srcdir)/m4/ntp_ver_suffix.m4 \
126	$(top_srcdir)/m4/openldap-thread-check.m4 \
127	$(top_srcdir)/m4/openldap.m4 $(top_srcdir)/m4/os_cflags.m4 \
128	$(top_srcdir)/m4/snprintf.m4 \
129	$(top_srcdir)/m4/sntp_problemtests.m4 \
130	$(top_srcdir)/m4/version.m4 $(top_srcdir)/configure.ac
131am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
132	$(ACLOCAL_M4)
133DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
134	$(am__configure_deps) $(noinst_HEADERS) $(am__DIST_COMMON)
135am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
136 configure.lineno config.status.lineno
137mkinstalldirs = $(install_sh) -d
138CONFIG_HEADER = config.h
139CONFIG_CLEAN_FILES =
140CONFIG_CLEAN_VPATH_FILES =
141am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libexecdir)" \
142	"$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" \
143	"$(DESTDIR)$(man8dir)" "$(DESTDIR)$(htmldir)"
144PROGRAMS = $(bin_PROGRAMS) $(libexec_PROGRAMS) $(sbin_PROGRAMS)
145LIBRARIES = $(noinst_LIBRARIES)
146ARFLAGS = cru
147AM_V_AR = $(am__v_AR_@AM_V@)
148am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
149am__v_AR_0 = @echo "  AR      " $@;
150am__v_AR_1 =
151libsntp_a_AR = $(AR) $(ARFLAGS)
152libsntp_a_LIBADD =
153am__objects_1 =
154am_libsntp_a_OBJECTS = crypto.$(OBJEXT) kod_management.$(OBJEXT) \
155	log.$(OBJEXT) main.$(OBJEXT) networking.$(OBJEXT) \
156	sntp-opts.$(OBJEXT) utilities.$(OBJEXT) $(am__objects_1)
157libsntp_a_OBJECTS = $(am_libsntp_a_OBJECTS)
158am_sntp_OBJECTS = sntp.$(OBJEXT) $(am__objects_1)
159nodist_sntp_OBJECTS = version.$(OBJEXT) $(am__objects_1)
160sntp_OBJECTS = $(am_sntp_OBJECTS) $(nodist_sntp_OBJECTS)
161sntp_LDADD = $(LDADD)
162am__DEPENDENCIES_1 =
163sntp_DEPENDENCIES = libsntp.a $(am__DEPENDENCIES_1) \
164	$(am__DEPENDENCIES_1) ../libntp/libntp.a $(am__DEPENDENCIES_1) \
165	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
166	$(am__DEPENDENCIES_1)
167AM_V_lt = $(am__v_lt_@AM_V@)
168am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
169am__v_lt_0 = --silent
170am__v_lt_1 =
171AM_V_P = $(am__v_P_@AM_V@)
172am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
173am__v_P_0 = false
174am__v_P_1 = :
175AM_V_GEN = $(am__v_GEN_@AM_V@)
176am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
177am__v_GEN_0 = @echo "  GEN     " $@;
178am__v_GEN_1 =
179AM_V_at = $(am__v_at_@AM_V@)
180am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
181am__v_at_0 = @
182am__v_at_1 =
183DEFAULT_INCLUDES = -I.@am__isrc@
184depcomp = $(SHELL) $(top_srcdir)/libevent/build-aux/depcomp
185am__maybe_remake_depfiles = depfiles
186am__depfiles_remade = ./$(DEPDIR)/crypto.Po \
187	./$(DEPDIR)/kod_management.Po ./$(DEPDIR)/log.Po \
188	./$(DEPDIR)/main.Po ./$(DEPDIR)/networking.Po \
189	./$(DEPDIR)/sntp-opts.Po ./$(DEPDIR)/sntp.Po \
190	./$(DEPDIR)/utilities.Po ./$(DEPDIR)/version.Po
191am__mv = mv -f
192COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
193	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
194LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
195	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
196	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
197	$(AM_CFLAGS) $(CFLAGS)
198AM_V_CC = $(am__v_CC_@AM_V@)
199am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
200am__v_CC_0 = @echo "  CC      " $@;
201am__v_CC_1 =
202CCLD = $(CC)
203LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
204	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
205	$(AM_LDFLAGS) $(LDFLAGS) -o $@
206AM_V_CCLD = $(am__v_CCLD_@AM_V@)
207am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
208am__v_CCLD_0 = @echo "  CCLD    " $@;
209am__v_CCLD_1 =
210SOURCES = $(libsntp_a_SOURCES) $(sntp_SOURCES) $(nodist_sntp_SOURCES)
211DIST_SOURCES = $(libsntp_a_SOURCES) $(sntp_SOURCES)
212RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
213	ctags-recursive dvi-recursive html-recursive info-recursive \
214	install-data-recursive install-dvi-recursive \
215	install-exec-recursive install-html-recursive \
216	install-info-recursive install-pdf-recursive \
217	install-ps-recursive install-recursive installcheck-recursive \
218	installdirs-recursive pdf-recursive ps-recursive \
219	tags-recursive uninstall-recursive
220am__can_run_installinfo = \
221  case $$AM_UPDATE_INFO_DIR in \
222    n|no|NO) false;; \
223    *) (install-info --version) >/dev/null 2>&1;; \
224  esac
225am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
226am__vpath_adj = case $$p in \
227    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
228    *) f=$$p;; \
229  esac;
230am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
231am__install_max = 40
232am__nobase_strip_setup = \
233  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
234am__nobase_strip = \
235  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
236am__nobase_list = $(am__nobase_strip_setup); \
237  for p in $$list; do echo "$$p $$p"; done | \
238  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
239  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
240    if (++n[$$2] == $(am__install_max)) \
241      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
242    END { for (dir in files) print dir, files[dir] }'
243am__base_list = \
244  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
245  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
246am__uninstall_files_from_dir = { \
247  test -z "$$files" \
248    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
249    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
250         $(am__cd) "$$dir" && rm -f $$files; }; \
251  }
252man1dir = $(mandir)/man1
253man8dir = $(mandir)/man8
254NROFF = nroff
255MANS = $(man1_MANS) $(man8_MANS) $(man_MANS)
256DATA = $(html_DATA) $(noinst_DATA)
257HEADERS = $(noinst_HEADERS)
258RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
259  distclean-recursive maintainer-clean-recursive
260am__recursive_targets = \
261  $(RECURSIVE_TARGETS) \
262  $(RECURSIVE_CLEAN_TARGETS) \
263  $(am__extra_recursive_targets)
264AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
265	cscope distdir distdir-am dist dist-all distcheck
266am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
267	config.h.in
268# Read a list of newline-separated strings from the standard input,
269# and print each of them once, without duplicates.  Input order is
270# *not* preserved.
271am__uniquify_input = $(AWK) '\
272  BEGIN { nonempty = 0; } \
273  { items[$$0] = 1; nonempty = 1; } \
274  END { if (nonempty) { for (i in items) print i; }; } \
275'
276# Make sure the list of sources is unique.  This is necessary because,
277# e.g., the same source file might be shared among _SOURCES variables
278# for different programs/libraries.
279am__define_uniq_tagged_files = \
280  list='$(am__tagged_files)'; \
281  unique=`for i in $$list; do \
282    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
283  done | $(am__uniquify_input)`
284DIST_SUBDIRS = include scripts unity libevent libopts tests
285am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
286	$(top_srcdir)/bincheck.mf $(top_srcdir)/check-libntp.mf \
287	$(top_srcdir)/check-libopts.mf $(top_srcdir)/depsver.mf \
288	$(top_srcdir)/includes.mf \
289	$(top_srcdir)/libevent/build-aux/ar-lib \
290	$(top_srcdir)/libevent/build-aux/compile \
291	$(top_srcdir)/libevent/build-aux/config.guess \
292	$(top_srcdir)/libevent/build-aux/config.sub \
293	$(top_srcdir)/libevent/build-aux/depcomp \
294	$(top_srcdir)/libevent/build-aux/install-sh \
295	$(top_srcdir)/libevent/build-aux/ltmain.sh \
296	$(top_srcdir)/libevent/build-aux/missing \
297	libevent/build-aux/ar-lib libevent/build-aux/compile \
298	libevent/build-aux/config.guess libevent/build-aux/config.sub \
299	libevent/build-aux/depcomp libevent/build-aux/install-sh \
300	libevent/build-aux/ltmain.sh libevent/build-aux/missing \
301	libevent/build-aux/ylwrap
302DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
303distdir = $(PACKAGE)-$(VERSION)
304top_distdir = $(distdir)
305am__remove_distdir = \
306  if test -d "$(distdir)"; then \
307    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
308      && rm -rf "$(distdir)" \
309      || { sleep 5 && rm -rf "$(distdir)"; }; \
310  else :; fi
311am__post_remove_distdir = $(am__remove_distdir)
312am__relativize = \
313  dir0=`pwd`; \
314  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
315  sed_rest='s,^[^/]*/*,,'; \
316  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
317  sed_butlast='s,/*[^/]*$$,,'; \
318  while test -n "$$dir1"; do \
319    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
320    if test "$$first" != "."; then \
321      if test "$$first" = ".."; then \
322        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
323        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
324      else \
325        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
326        if test "$$first2" = "$$first"; then \
327          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
328        else \
329          dir2="../$$dir2"; \
330        fi; \
331        dir0="$$dir0"/"$$first"; \
332      fi; \
333    fi; \
334    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
335  done; \
336  reldir="$$dir2"
337DIST_ARCHIVES = $(distdir).tar.gz
338GZIP_ENV = --best
339DIST_TARGETS = dist-gzip
340# Exists only to be overridden by the user if desired.
341AM_DISTCHECK_DVI_TARGET = dvi
342distuninstallcheck_listfiles = find . -type f -print
343am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
344  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
345distcleancheck_listfiles = find . -type f -print
346ACLOCAL = @ACLOCAL@
347ALLOCA = @ALLOCA@
348AMTAR = @AMTAR@
349AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
350AR = @AR@
351AUTOCONF = @AUTOCONF@
352AUTOHEADER = @AUTOHEADER@
353AUTOMAKE = @AUTOMAKE@
354AWK = @AWK@
355BUILD_THREAD = @BUILD_THREAD@
356CALC_TICKADJ_DB = @CALC_TICKADJ_DB@
357CALC_TICKADJ_DL = @CALC_TICKADJ_DL@
358CALC_TICKADJ_DS = @CALC_TICKADJ_DS@
359CALC_TICKADJ_MS = @CALC_TICKADJ_MS@
360CALC_TICKADJ_NI = @CALC_TICKADJ_NI@
361CC = @CC@
362CCDEPMODE = @CCDEPMODE@
363CC_NOFORMAT = @CC_NOFORMAT@
364CFLAGS = @CFLAGS@
365CFLAGS_LIBEVENT = @CFLAGS_LIBEVENT@
366CFLAGS_NTP = @CFLAGS_NTP@
367CPP = @CPP@
368CPPFLAGS = @CPPFLAGS@
369CPPFLAGS_LIBEVENT = @CPPFLAGS_LIBEVENT@
370CPPFLAGS_NTP = @CPPFLAGS_NTP@
371CSCOPE = @CSCOPE@
372CTAGS = @CTAGS@
373CYGPATH_W = @CYGPATH_W@
374DEFS = @DEFS@
375DEPDIR = @DEPDIR@
376DLLTOOL = @DLLTOOL@
377DSYMUTIL = @DSYMUTIL@
378DUMPBIN = @DUMPBIN@
379ECHO_C = @ECHO_C@
380ECHO_N = @ECHO_N@
381ECHO_T = @ECHO_T@
382EDITLINE_LIBS = @EDITLINE_LIBS@
383EGREP = @EGREP@
384ETAGS = @ETAGS@
385EXEEXT = @EXEEXT@
386FGREP = @FGREP@
387GREP = @GREP@
388HAVE_INLINE = @HAVE_INLINE@
389INSTALL = @INSTALL@
390INSTALL_DATA = @INSTALL_DATA@
391INSTALL_PROGRAM = @INSTALL_PROGRAM@
392INSTALL_SCRIPT = @INSTALL_SCRIPT@
393INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
394LD = @LD@
395LDADD_LIBEVENT = @LDADD_LIBEVENT@
396LDADD_LIBNTP = @LDADD_LIBNTP@
397LDADD_LIBUTIL = @LDADD_LIBUTIL@
398LDADD_NTP = @LDADD_NTP@
399LDFLAGS = @LDFLAGS@
400LDFLAGS_NTP = @LDFLAGS_NTP@
401LIBISC_PTHREADS_NOTHREADS = @LIBISC_PTHREADS_NOTHREADS@
402LIBM = @LIBM@
403LIBOBJS = @LIBOBJS@
404LIBOPTS_CFLAGS = @LIBOPTS_CFLAGS@
405LIBOPTS_DIR = @LIBOPTS_DIR@
406LIBOPTS_LDADD = @LIBOPTS_LDADD@
407LIBS = @LIBS@
408LIBTOOL = @LIBTOOL@
409LIBTOOL_DEPS = @LIBTOOL_DEPS@
410LIB_SYSLOG = @LIB_SYSLOG@
411LIPO = @LIPO@
412LN_S = @LN_S@
413LTHREAD_LIBS = @LTHREAD_LIBS@
414LTLIBOBJS = @LTLIBOBJS@
415LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
416MAKEINFO = @MAKEINFO@
417MANIFEST_TOOL = @MANIFEST_TOOL@
418MANTAGFMT = @MANTAGFMT@
419MKDIR_P = @MKDIR_P@
420NM = @NM@
421NMEDIT = @NMEDIT@
422NTPDATE_DB = @NTPDATE_DB@
423NTPDATE_DL = @NTPDATE_DL@
424NTPDATE_DS = @NTPDATE_DS@
425NTPDATE_MS = @NTPDATE_MS@
426NTPDATE_NI = @NTPDATE_NI@
427NTPDC_DB = @NTPDC_DB@
428NTPDC_DL = @NTPDC_DL@
429NTPDC_DS = @NTPDC_DS@
430NTPDC_MS = @NTPDC_MS@
431NTPDC_NI = @NTPDC_NI@
432NTPDSIM_DB = @NTPDSIM_DB@
433NTPDSIM_DL = @NTPDSIM_DL@
434NTPDSIM_DS = @NTPDSIM_DS@
435NTPDSIM_MS = @NTPDSIM_MS@
436NTPDSIM_NI = @NTPDSIM_NI@
437NTPD_DB = @NTPD_DB@
438NTPD_DL = @NTPD_DL@
439NTPD_DS = @NTPD_DS@
440NTPD_MS = @NTPD_MS@
441NTPD_NI = @NTPD_NI@
442NTPQ_DB = @NTPQ_DB@
443NTPQ_DL = @NTPQ_DL@
444NTPQ_DS = @NTPQ_DS@
445NTPQ_MS = @NTPQ_MS@
446NTPQ_NI = @NTPQ_NI@
447NTPSNMPD_DB = @NTPSNMPD_DB@
448NTPSNMPD_DL = @NTPSNMPD_DL@
449NTPSNMPD_DS = @NTPSNMPD_DS@
450NTPSNMPD_MS = @NTPSNMPD_MS@
451NTPSNMPD_NI = @NTPSNMPD_NI@
452NTPSWEEP_DB = @NTPSWEEP_DB@
453NTPSWEEP_DL = @NTPSWEEP_DL@
454NTPSWEEP_DS = @NTPSWEEP_DS@
455NTPSWEEP_MS = @NTPSWEEP_MS@
456NTPSWEEP_NI = @NTPSWEEP_NI@
457NTPTIME_DB = @NTPTIME_DB@
458NTPTIME_DL = @NTPTIME_DL@
459NTPTIME_DS = @NTPTIME_DS@
460NTPTIME_MS = @NTPTIME_MS@
461NTPTIME_NI = @NTPTIME_NI@
462NTPTRACE_DB = @NTPTRACE_DB@
463NTPTRACE_DL = @NTPTRACE_DL@
464NTPTRACE_DS = @NTPTRACE_DS@
465NTPTRACE_MS = @NTPTRACE_MS@
466NTPTRACE_NI = @NTPTRACE_NI@
467NTP_FORCE_LIBEVENT_DIST = @NTP_FORCE_LIBEVENT_DIST@
468NTP_HARD_CFLAGS = @NTP_HARD_CFLAGS@
469NTP_HARD_CPPFLAGS = @NTP_HARD_CPPFLAGS@
470NTP_HARD_LDFLAGS = @NTP_HARD_LDFLAGS@
471NTP_KEYGEN_DB = @NTP_KEYGEN_DB@
472NTP_KEYGEN_DL = @NTP_KEYGEN_DL@
473NTP_KEYGEN_DS = @NTP_KEYGEN_DS@
474NTP_KEYGEN_MS = @NTP_KEYGEN_MS@
475NTP_KEYGEN_NI = @NTP_KEYGEN_NI@
476NTP_WAIT_DB = @NTP_WAIT_DB@
477NTP_WAIT_DL = @NTP_WAIT_DL@
478NTP_WAIT_DS = @NTP_WAIT_DS@
479NTP_WAIT_MS = @NTP_WAIT_MS@
480NTP_WAIT_NI = @NTP_WAIT_NI@
481OBJDUMP = @OBJDUMP@
482OBJEXT = @OBJEXT@
483OTOOL = @OTOOL@
484OTOOL64 = @OTOOL64@
485PACKAGE = @PACKAGE@
486PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
487PACKAGE_NAME = @PACKAGE_NAME@
488PACKAGE_STRING = @PACKAGE_STRING@
489PACKAGE_TARNAME = @PACKAGE_TARNAME@
490PACKAGE_URL = @PACKAGE_URL@
491PACKAGE_VERSION = @PACKAGE_VERSION@
492PATH_RUBY = @PATH_RUBY@
493PATH_SEPARATOR = @PATH_SEPARATOR@
494PKG_CONFIG = @PKG_CONFIG@
495POSIX_SHELL = @POSIX_SHELL@
496PTHREAD_LIBS = @PTHREAD_LIBS@
497RANLIB = @RANLIB@
498SED = @SED@
499SET_MAKE = @SET_MAKE@
500SHELL = @SHELL@
501SNTP = @SNTP@
502SNTP_DB = @SNTP_DB@
503SNTP_DL = @SNTP_DL@
504SNTP_DS = @SNTP_DS@
505SNTP_MS = @SNTP_MS@
506SNTP_NI = @SNTP_NI@
507STDNORETURN_H = @STDNORETURN_H@
508STRIP = @STRIP@
509TICKADJ_DB = @TICKADJ_DB@
510TICKADJ_DL = @TICKADJ_DL@
511TICKADJ_DS = @TICKADJ_DS@
512TICKADJ_MS = @TICKADJ_MS@
513TICKADJ_NI = @TICKADJ_NI@
514TIMETRIM_DB = @TIMETRIM_DB@
515TIMETRIM_DL = @TIMETRIM_DL@
516TIMETRIM_DS = @TIMETRIM_DS@
517TIMETRIM_MS = @TIMETRIM_MS@
518TIMETRIM_NI = @TIMETRIM_NI@
519UPDATE_LEAP_DB = @UPDATE_LEAP_DB@
520UPDATE_LEAP_DL = @UPDATE_LEAP_DL@
521UPDATE_LEAP_DS = @UPDATE_LEAP_DS@
522UPDATE_LEAP_MS = @UPDATE_LEAP_MS@
523UPDATE_LEAP_NI = @UPDATE_LEAP_NI@
524VERSION = @VERSION@
525VER_SUFFIX = @VER_SUFFIX@
526abs_builddir = @abs_builddir@
527abs_srcdir = @abs_srcdir@
528abs_top_builddir = @abs_top_builddir@
529abs_top_srcdir = @abs_top_srcdir@
530ac_ct_AR = @ac_ct_AR@
531ac_ct_CC = @ac_ct_CC@
532ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
533am__include = @am__include@
534am__leading_dot = @am__leading_dot@
535am__quote = @am__quote@
536am__tar = @am__tar@
537am__untar = @am__untar@
538bindir = @bindir@
539build = @build@
540build_alias = @build_alias@
541build_cpu = @build_cpu@
542build_os = @build_os@
543build_vendor = @build_vendor@
544builddir = @builddir@
545datadir = @datadir@
546datarootdir = @datarootdir@
547docdir = @docdir@
548dvidir = @dvidir@
549exec_prefix = @exec_prefix@
550host = @host@
551host_alias = @host_alias@
552host_cpu = @host_cpu@
553host_os = @host_os@
554host_vendor = @host_vendor@
555htmldir = @htmldir@
556includedir = @includedir@
557infodir = @infodir@
558install_sh = @install_sh@
559libdir = @libdir@
560libexecdir = @libexecdir@
561localedir = @localedir@
562localstatedir = @localstatedir@
563mandir = @mandir@
564mkdir_p = @mkdir_p@
565oldincludedir = @oldincludedir@
566pdfdir = @pdfdir@
567prefix = @prefix@
568program_transform_name = @program_transform_name@
569psdir = @psdir@
570runstatedir = @runstatedir@
571sbindir = @sbindir@
572sharedstatedir = @sharedstatedir@
573srcdir = @srcdir@
574subdirs = @subdirs@
575sysconfdir = @sysconfdir@
576target_alias = @target_alias@
577top_build_prefix = @top_build_prefix@
578top_builddir = @top_builddir@
579top_srcdir = @top_srcdir@
580ACLOCAL_AMFLAGS = -I m4 -I libevent/m4 -I libopts/m4
581NULL =
582AM_CFLAGS = $(CFLAGS_NTP) $(NTP_HARD_CFLAGS)
583AM_CPPFLAGS = $(SNTP_INCS) $(LIBOPTS_CFLAGS) $(CPPFLAGS_LIBEVENT) \
584	$(CPPFLAGS_NTP) $(NTP_HARD_CPPFLAGS)
585AM_LDFLAGS = $(LDFLAGS_NTP) $(NTP_HARD_LDFLAGS)
586LDADD = libsntp.a $(LIBOPTS_LDADD) $(LDADD_LIBEVENT) \
587	../libntp/libntp.a $(LDADD_LIBNTP) $(LIBM) $(PTHREAD_LIBS) \
588	$(LDADD_NTP)
589run_ag = cd $(srcdir) &&	env PATH="$(abs_builddir):$(PATH)" AUTOGEN_DNE_DATE=-D	\
590		autogen -L include -L ag-tpl --writable
591
592std_def_list = \
593	$(srcdir)/include/debug-opt.def			\
594	$(srcdir)/include/autogen-version.def 		\
595	$(srcdir)/include/copyright.def 		\
596	$(srcdir)/include/homerc.def 			\
597	$(srcdir)/include/ntp.lic 			\
598	$(srcdir)/include/version.def			\
599	$(NULL)
600
601bin_PROGRAMS = @SNTP_DB@
602libexec_PROGRAMS = @SNTP_DL@
603sbin_PROGRAMS = @SNTP_DS@
604SUBDIRS = include scripts unity $(am__append_1) $(am__append_3) \
605	$(am__append_4)
606DIST_FAIL = $(am__append_2)
607@BUILD_SNTP_TRUE@noinst_LIBRARIES = libsntp.a
608libsntp_a_SOURCES = \
609	crypto.c		\
610	kod_management.c	\
611	log.c			\
612	main.c			\
613	networking.c		\
614	sntp-opts.c		\
615	utilities.c		\
616	$(NULL)
617
618sntp_SOURCES = \
619	sntp.c			\
620	$(NULL)
621
622nodist_sntp_SOURCES = \
623	version.c		\
624	$(NULL)
625
626noinst_HEADERS = \
627	crypto.h		\
628	data_formats.h		\
629	kod_management.h	\
630	log.h			\
631	main.h			\
632	networking.h		\
633	sntp-opts.h		\
634	utilities.h		\
635	$(NULL)
636
637DISTCLEANFILES = config.log $(man_MANS) $(NULL) $(DEPDIR)/deps-ver
638EXTRA_DIST = \
639	$(srcdir)/COPYRIGHT		\
640	ag-tpl				\
641	deps-ver			\
642	harden				\
643	invoke-sntp.menu		\
644	invoke-sntp.texi		\
645	@NTP_FORCE_LIBEVENT_DIST@	\
646	libpkgver 			\
647	loc				\
648	sntp-opts.def			\
649	sntp.1sntpman			\
650	sntp.1sntpmdoc			\
651	sntp.man.in			\
652	sntp.mdoc.in			\
653	sntp.html			\
654	sntp.texi			\
655	unity/auto			\
656	$(srcdir)/scm-rev		\
657	$(srcdir)/m4/version.m4		\
658	$(NULL)
659
660BUILT_SOURCES = $(srcdir)/COPYRIGHT libtool $(srcdir)/sntp-opts.c \
661	$(srcdir)/sntp-opts.h $(srcdir)/include/version.def \
662	$(srcdir)/m4/version.m4 $(srcdir)/include/version.texi $(NULL) \
663	check-libntp check-libopts .deps-ver
664CLEANFILES = check-COPYRIGHT-submake .version version.c $(NULL) \
665	check-libntp check-libopts .deps-ver
666man1_MANS =
667man8_MANS =
668man_MANS = sntp.$(SNTP_MS)
669html_DATA = \
670	$(srcdir)/sntp.html		\
671	$(NULL)
672
673noinst_DATA = \
674	$(srcdir)/invoke-sntp.menu	\
675	$(srcdir)/invoke-sntp.texi	\
676	$(srcdir)/sntp.man.in		\
677	$(srcdir)/sntp.mdoc.in		\
678	$(NULL)
679
680SNTP_INCS = -I$(top_srcdir)/../include \
681	-I$(top_srcdir)/../libntp/lib/isc/include \
682	-I$(top_srcdir)/../libntp/lib/isc/$(LIBISC_PTHREADS_NOTHREADS)/include \
683	-I$(top_srcdir)/../libntp/lib/isc/unix/include
684all: $(BUILT_SOURCES) config.h
685	$(MAKE) $(AM_MAKEFLAGS) all-recursive
686
687.SUFFIXES:
688.SUFFIXES: .c .lo .o .obj
689am--refresh: Makefile
690	@:
691$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/bincheck.mf $(top_srcdir)/check-libntp.mf $(top_srcdir)/check-libopts.mf $(top_srcdir)/depsver.mf $(top_srcdir)/includes.mf $(am__configure_deps)
692	@for dep in $?; do \
693	  case '$(am__configure_deps)' in \
694	    *$$dep*) \
695	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
696	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
697		&& exit 0; \
698	      exit 1;; \
699	  esac; \
700	done; \
701	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
702	$(am__cd) $(top_srcdir) && \
703	  $(AUTOMAKE) --foreign Makefile
704Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
705	@case '$?' in \
706	  *config.status*) \
707	    echo ' $(SHELL) ./config.status'; \
708	    $(SHELL) ./config.status;; \
709	  *) \
710	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
711	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
712	esac;
713$(top_srcdir)/bincheck.mf $(top_srcdir)/check-libntp.mf $(top_srcdir)/check-libopts.mf $(top_srcdir)/depsver.mf $(top_srcdir)/includes.mf $(am__empty):
714
715$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
716	$(SHELL) ./config.status --recheck
717
718$(top_srcdir)/configure:  $(am__configure_deps)
719	$(am__cd) $(srcdir) && $(AUTOCONF)
720$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
721	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
722$(am__aclocal_m4_deps):
723
724config.h: stamp-h1
725	@test -f $@ || rm -f stamp-h1
726	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
727
728stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
729	@rm -f stamp-h1
730	cd $(top_builddir) && $(SHELL) ./config.status config.h
731$(srcdir)/config.h.in:  $(am__configure_deps)
732	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
733	rm -f stamp-h1
734	touch $@
735
736distclean-hdr:
737	-rm -f config.h stamp-h1
738install-binPROGRAMS: $(bin_PROGRAMS)
739	@$(NORMAL_INSTALL)
740	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
741	if test -n "$$list"; then \
742	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
743	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
744	fi; \
745	for p in $$list; do echo "$$p $$p"; done | \
746	sed 's/$(EXEEXT)$$//' | \
747	while read p p1; do if test -f $$p \
748	 || test -f $$p1 \
749	  ; then echo "$$p"; echo "$$p"; else :; fi; \
750	done | \
751	sed -e 'p;s,.*/,,;n;h' \
752	    -e 's|.*|.|' \
753	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
754	sed 'N;N;N;s,\n, ,g' | \
755	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
756	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
757	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
758	    else { print "f", $$3 "/" $$4, $$1; } } \
759	  END { for (d in files) print "f", d, files[d] }' | \
760	while read type dir files; do \
761	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
762	    test -z "$$files" || { \
763	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
764	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
765	    } \
766	; done
767
768uninstall-binPROGRAMS:
769	@$(NORMAL_UNINSTALL)
770	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
771	files=`for p in $$list; do echo "$$p"; done | \
772	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
773	      -e 's/$$/$(EXEEXT)/' \
774	`; \
775	test -n "$$list" || exit 0; \
776	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
777	cd "$(DESTDIR)$(bindir)" && rm -f $$files
778
779clean-binPROGRAMS:
780	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
781	echo " rm -f" $$list; \
782	rm -f $$list || exit $$?; \
783	test -n "$(EXEEXT)" || exit 0; \
784	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
785	echo " rm -f" $$list; \
786	rm -f $$list
787install-libexecPROGRAMS: $(libexec_PROGRAMS)
788	@$(NORMAL_INSTALL)
789	@list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \
790	if test -n "$$list"; then \
791	  echo " $(MKDIR_P) '$(DESTDIR)$(libexecdir)'"; \
792	  $(MKDIR_P) "$(DESTDIR)$(libexecdir)" || exit 1; \
793	fi; \
794	for p in $$list; do echo "$$p $$p"; done | \
795	sed 's/$(EXEEXT)$$//' | \
796	while read p p1; do if test -f $$p \
797	 || test -f $$p1 \
798	  ; then echo "$$p"; echo "$$p"; else :; fi; \
799	done | \
800	sed -e 'p;s,.*/,,;n;h' \
801	    -e 's|.*|.|' \
802	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
803	sed 'N;N;N;s,\n, ,g' | \
804	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
805	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
806	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
807	    else { print "f", $$3 "/" $$4, $$1; } } \
808	  END { for (d in files) print "f", d, files[d] }' | \
809	while read type dir files; do \
810	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
811	    test -z "$$files" || { \
812	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \
813	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \
814	    } \
815	; done
816
817uninstall-libexecPROGRAMS:
818	@$(NORMAL_UNINSTALL)
819	@list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \
820	files=`for p in $$list; do echo "$$p"; done | \
821	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
822	      -e 's/$$/$(EXEEXT)/' \
823	`; \
824	test -n "$$list" || exit 0; \
825	echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \
826	cd "$(DESTDIR)$(libexecdir)" && rm -f $$files
827
828clean-libexecPROGRAMS:
829	@list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \
830	echo " rm -f" $$list; \
831	rm -f $$list || exit $$?; \
832	test -n "$(EXEEXT)" || exit 0; \
833	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
834	echo " rm -f" $$list; \
835	rm -f $$list
836install-sbinPROGRAMS: $(sbin_PROGRAMS)
837	@$(NORMAL_INSTALL)
838	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
839	if test -n "$$list"; then \
840	  echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
841	  $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
842	fi; \
843	for p in $$list; do echo "$$p $$p"; done | \
844	sed 's/$(EXEEXT)$$//' | \
845	while read p p1; do if test -f $$p \
846	 || test -f $$p1 \
847	  ; then echo "$$p"; echo "$$p"; else :; fi; \
848	done | \
849	sed -e 'p;s,.*/,,;n;h' \
850	    -e 's|.*|.|' \
851	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
852	sed 'N;N;N;s,\n, ,g' | \
853	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
854	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
855	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
856	    else { print "f", $$3 "/" $$4, $$1; } } \
857	  END { for (d in files) print "f", d, files[d] }' | \
858	while read type dir files; do \
859	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
860	    test -z "$$files" || { \
861	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
862	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
863	    } \
864	; done
865
866uninstall-sbinPROGRAMS:
867	@$(NORMAL_UNINSTALL)
868	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
869	files=`for p in $$list; do echo "$$p"; done | \
870	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
871	      -e 's/$$/$(EXEEXT)/' \
872	`; \
873	test -n "$$list" || exit 0; \
874	echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
875	cd "$(DESTDIR)$(sbindir)" && rm -f $$files
876
877clean-sbinPROGRAMS:
878	@list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
879	echo " rm -f" $$list; \
880	rm -f $$list || exit $$?; \
881	test -n "$(EXEEXT)" || exit 0; \
882	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
883	echo " rm -f" $$list; \
884	rm -f $$list
885
886clean-noinstLIBRARIES:
887	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
888
889libsntp.a: $(libsntp_a_OBJECTS) $(libsntp_a_DEPENDENCIES) $(EXTRA_libsntp_a_DEPENDENCIES)
890	$(AM_V_at)-rm -f libsntp.a
891	$(AM_V_AR)$(libsntp_a_AR) libsntp.a $(libsntp_a_OBJECTS) $(libsntp_a_LIBADD)
892	$(AM_V_at)$(RANLIB) libsntp.a
893
894sntp$(EXEEXT): $(sntp_OBJECTS) $(sntp_DEPENDENCIES) $(EXTRA_sntp_DEPENDENCIES)
895	@rm -f sntp$(EXEEXT)
896	$(AM_V_CCLD)$(LINK) $(sntp_OBJECTS) $(sntp_LDADD) $(LIBS)
897
898mostlyclean-compile:
899	-rm -f *.$(OBJEXT)
900
901distclean-compile:
902	-rm -f *.tab.c
903
904@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypto.Po@am__quote@ # am--include-marker
905@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/kod_management.Po@am__quote@ # am--include-marker
906@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/log.Po@am__quote@ # am--include-marker
907@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ # am--include-marker
908@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/networking.Po@am__quote@ # am--include-marker
909@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sntp-opts.Po@am__quote@ # am--include-marker
910@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sntp.Po@am__quote@ # am--include-marker
911@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utilities.Po@am__quote@ # am--include-marker
912@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/version.Po@am__quote@ # am--include-marker
913
914$(am__depfiles_remade):
915	@$(MKDIR_P) $(@D)
916	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
917
918am--depfiles: $(am__depfiles_remade)
919
920.c.o:
921@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
922@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
923@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
924@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
925@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
926@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
927
928.c.obj:
929@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
930@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
931@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
932@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
933@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
934@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
935
936.c.lo:
937@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
938@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
939@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Plo
940@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
941@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
942@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
943
944mostlyclean-libtool:
945	-rm -f *.lo
946
947clean-libtool:
948	-rm -rf .libs _libs
949
950distclean-libtool:
951	-rm -f libtool config.lt
952install-man1: $(man1_MANS) $(man_MANS)
953	@$(NORMAL_INSTALL)
954	@list1='$(man1_MANS)'; \
955	list2='$(man_MANS)'; \
956	test -n "$(man1dir)" \
957	  && test -n "`echo $$list1$$list2`" \
958	  || exit 0; \
959	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
960	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
961	{ for i in $$list1; do echo "$$i"; done;  \
962	if test -n "$$list2"; then \
963	  for i in $$list2; do echo "$$i"; done \
964	    | sed -n '/\.1[a-z]*$$/p'; \
965	fi; \
966	} | while read p; do \
967	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
968	  echo "$$d$$p"; echo "$$p"; \
969	done | \
970	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
971	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
972	sed 'N;N;s,\n, ,g' | { \
973	list=; while read file base inst; do \
974	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
975	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
976	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
977	  fi; \
978	done; \
979	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
980	while read files; do \
981	  test -z "$$files" || { \
982	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
983	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
984	done; }
985
986uninstall-man1:
987	@$(NORMAL_UNINSTALL)
988	@list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
989	files=`{ for i in $$list; do echo "$$i"; done; \
990	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
991	  sed -n '/\.1[a-z]*$$/p'; \
992	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
993	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
994	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
995install-man8: $(man8_MANS) $(man_MANS)
996	@$(NORMAL_INSTALL)
997	@list1='$(man8_MANS)'; \
998	list2='$(man_MANS)'; \
999	test -n "$(man8dir)" \
1000	  && test -n "`echo $$list1$$list2`" \
1001	  || exit 0; \
1002	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
1003	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
1004	{ for i in $$list1; do echo "$$i"; done;  \
1005	if test -n "$$list2"; then \
1006	  for i in $$list2; do echo "$$i"; done \
1007	    | sed -n '/\.8[a-z]*$$/p'; \
1008	fi; \
1009	} | while read p; do \
1010	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
1011	  echo "$$d$$p"; echo "$$p"; \
1012	done | \
1013	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
1014	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
1015	sed 'N;N;s,\n, ,g' | { \
1016	list=; while read file base inst; do \
1017	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
1018	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
1019	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
1020	  fi; \
1021	done; \
1022	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
1023	while read files; do \
1024	  test -z "$$files" || { \
1025	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
1026	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
1027	done; }
1028
1029uninstall-man8:
1030	@$(NORMAL_UNINSTALL)
1031	@list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \
1032	files=`{ for i in $$list; do echo "$$i"; done; \
1033	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
1034	  sed -n '/\.8[a-z]*$$/p'; \
1035	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
1036	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
1037	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
1038install-htmlDATA: $(html_DATA)
1039	@$(NORMAL_INSTALL)
1040	@list='$(html_DATA)'; test -n "$(htmldir)" || list=; \
1041	if test -n "$$list"; then \
1042	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
1043	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
1044	fi; \
1045	for p in $$list; do \
1046	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
1047	  echo "$$d$$p"; \
1048	done | $(am__base_list) | \
1049	while read files; do \
1050	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
1051	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
1052	done
1053
1054uninstall-htmlDATA:
1055	@$(NORMAL_UNINSTALL)
1056	@list='$(html_DATA)'; test -n "$(htmldir)" || list=; \
1057	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
1058	dir='$(DESTDIR)$(htmldir)'; $(am__uninstall_files_from_dir)
1059
1060# This directory's subdirectories are mostly independent; you can cd
1061# into them and run 'make' without going through this Makefile.
1062# To change the values of 'make' variables: instead of editing Makefiles,
1063# (1) if the variable is set in 'config.status', edit 'config.status'
1064#     (which will cause the Makefiles to be regenerated when you run 'make');
1065# (2) otherwise, pass the desired values on the 'make' command line.
1066$(am__recursive_targets):
1067	@fail=; \
1068	if $(am__make_keepgoing); then \
1069	  failcom='fail=yes'; \
1070	else \
1071	  failcom='exit 1'; \
1072	fi; \
1073	dot_seen=no; \
1074	target=`echo $@ | sed s/-recursive//`; \
1075	case "$@" in \
1076	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
1077	  *) list='$(SUBDIRS)' ;; \
1078	esac; \
1079	for subdir in $$list; do \
1080	  echo "Making $$target in $$subdir"; \
1081	  if test "$$subdir" = "."; then \
1082	    dot_seen=yes; \
1083	    local_target="$$target-am"; \
1084	  else \
1085	    local_target="$$target"; \
1086	  fi; \
1087	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
1088	  || eval $$failcom; \
1089	done; \
1090	if test "$$dot_seen" = "no"; then \
1091	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
1092	fi; test -z "$$fail"
1093
1094ID: $(am__tagged_files)
1095	$(am__define_uniq_tagged_files); mkid -fID $$unique
1096tags: tags-recursive
1097TAGS: tags
1098
1099tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
1100	set x; \
1101	here=`pwd`; \
1102	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
1103	  include_option=--etags-include; \
1104	  empty_fix=.; \
1105	else \
1106	  include_option=--include; \
1107	  empty_fix=; \
1108	fi; \
1109	list='$(SUBDIRS)'; for subdir in $$list; do \
1110	  if test "$$subdir" = .; then :; else \
1111	    test ! -f $$subdir/TAGS || \
1112	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
1113	  fi; \
1114	done; \
1115	$(am__define_uniq_tagged_files); \
1116	shift; \
1117	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
1118	  test -n "$$unique" || unique=$$empty_fix; \
1119	  if test $$# -gt 0; then \
1120	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
1121	      "$$@" $$unique; \
1122	  else \
1123	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
1124	      $$unique; \
1125	  fi; \
1126	fi
1127ctags: ctags-recursive
1128
1129CTAGS: ctags
1130ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
1131	$(am__define_uniq_tagged_files); \
1132	test -z "$(CTAGS_ARGS)$$unique" \
1133	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
1134	     $$unique
1135
1136GTAGS:
1137	here=`$(am__cd) $(top_builddir) && pwd` \
1138	  && $(am__cd) $(top_srcdir) \
1139	  && gtags -i $(GTAGS_ARGS) "$$here"
1140cscope: cscope.files
1141	test ! -s cscope.files \
1142	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
1143clean-cscope:
1144	-rm -f cscope.files
1145cscope.files: clean-cscope cscopelist
1146cscopelist: cscopelist-recursive
1147
1148cscopelist-am: $(am__tagged_files)
1149	list='$(am__tagged_files)'; \
1150	case "$(srcdir)" in \
1151	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
1152	  *) sdir=$(subdir)/$(srcdir) ;; \
1153	esac; \
1154	for i in $$list; do \
1155	  if test -f "$$i"; then \
1156	    echo "$(subdir)/$$i"; \
1157	  else \
1158	    echo "$$sdir/$$i"; \
1159	  fi; \
1160	done >> $(top_builddir)/cscope.files
1161
1162distclean-tags:
1163	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
1164	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
1165distdir: $(BUILT_SOURCES)
1166	$(MAKE) $(AM_MAKEFLAGS) distdir-am
1167
1168distdir-am: $(DISTFILES)
1169	$(am__remove_distdir)
1170	test -d "$(distdir)" || mkdir "$(distdir)"
1171	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
1172	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
1173	list='$(DISTFILES)'; \
1174	  dist_files=`for file in $$list; do echo $$file; done | \
1175	  sed -e "s|^$$srcdirstrip/||;t" \
1176	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
1177	case $$dist_files in \
1178	  */*) $(MKDIR_P) `echo "$$dist_files" | \
1179			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
1180			   sort -u` ;; \
1181	esac; \
1182	for file in $$dist_files; do \
1183	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
1184	  if test -d $$d/$$file; then \
1185	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
1186	    if test -d "$(distdir)/$$file"; then \
1187	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1188	    fi; \
1189	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
1190	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
1191	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1192	    fi; \
1193	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
1194	  else \
1195	    test -f "$(distdir)/$$file" \
1196	    || cp -p $$d/$$file "$(distdir)/$$file" \
1197	    || exit 1; \
1198	  fi; \
1199	done
1200	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
1201	  if test "$$subdir" = .; then :; else \
1202	    $(am__make_dryrun) \
1203	      || test -d "$(distdir)/$$subdir" \
1204	      || $(MKDIR_P) "$(distdir)/$$subdir" \
1205	      || exit 1; \
1206	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
1207	    $(am__relativize); \
1208	    new_distdir=$$reldir; \
1209	    dir1=$$subdir; dir2="$(top_distdir)"; \
1210	    $(am__relativize); \
1211	    new_top_distdir=$$reldir; \
1212	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
1213	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
1214	    ($(am__cd) $$subdir && \
1215	      $(MAKE) $(AM_MAKEFLAGS) \
1216	        top_distdir="$$new_top_distdir" \
1217	        distdir="$$new_distdir" \
1218		am__remove_distdir=: \
1219		am__skip_length_check=: \
1220		am__skip_mode_fix=: \
1221	        distdir) \
1222	      || exit 1; \
1223	  fi; \
1224	done
1225	-test -n "$(am__skip_mode_fix)" \
1226	|| find "$(distdir)" -type d ! -perm -755 \
1227		-exec chmod u+rwx,go+rx {} \; -o \
1228	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
1229	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
1230	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
1231	|| chmod -R a+r "$(distdir)"
1232dist-gzip: distdir
1233	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
1234	$(am__post_remove_distdir)
1235
1236dist-bzip2: distdir
1237	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
1238	$(am__post_remove_distdir)
1239
1240dist-lzip: distdir
1241	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
1242	$(am__post_remove_distdir)
1243
1244dist-xz: distdir
1245	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
1246	$(am__post_remove_distdir)
1247
1248dist-zstd: distdir
1249	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
1250	$(am__post_remove_distdir)
1251
1252dist-tarZ: distdir
1253	@echo WARNING: "Support for distribution archives compressed with" \
1254		       "legacy program 'compress' is deprecated." >&2
1255	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
1256	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
1257	$(am__post_remove_distdir)
1258
1259dist-shar: distdir
1260	@echo WARNING: "Support for shar distribution archives is" \
1261	               "deprecated." >&2
1262	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
1263	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
1264	$(am__post_remove_distdir)
1265
1266dist-zip: distdir
1267	-rm -f $(distdir).zip
1268	zip -rq $(distdir).zip $(distdir)
1269	$(am__post_remove_distdir)
1270
1271dist dist-all:
1272	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
1273	$(am__post_remove_distdir)
1274
1275# This target untars the dist file and tries a VPATH configuration.  Then
1276# it guarantees that the distribution is self-contained by making another
1277# tarfile.
1278distcheck: dist
1279	case '$(DIST_ARCHIVES)' in \
1280	*.tar.gz*) \
1281	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
1282	*.tar.bz2*) \
1283	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
1284	*.tar.lz*) \
1285	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
1286	*.tar.xz*) \
1287	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
1288	*.tar.Z*) \
1289	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
1290	*.shar.gz*) \
1291	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
1292	*.zip*) \
1293	  unzip $(distdir).zip ;;\
1294	*.tar.zst*) \
1295	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
1296	esac
1297	chmod -R a-w $(distdir)
1298	chmod u+w $(distdir)
1299	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
1300	chmod a-w $(distdir)
1301	test -d $(distdir)/_build || exit 0; \
1302	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
1303	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
1304	  && am__cwd=`pwd` \
1305	  && $(am__cd) $(distdir)/_build/sub \
1306	  && ../../configure \
1307	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
1308	    $(DISTCHECK_CONFIGURE_FLAGS) \
1309	    --srcdir=../.. --prefix="$$dc_install_base" \
1310	  && $(MAKE) $(AM_MAKEFLAGS) \
1311	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
1312	  && $(MAKE) $(AM_MAKEFLAGS) check \
1313	  && $(MAKE) $(AM_MAKEFLAGS) install \
1314	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
1315	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
1316	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
1317	        distuninstallcheck \
1318	  && chmod -R a-w "$$dc_install_base" \
1319	  && ({ \
1320	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
1321	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
1322	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
1323	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
1324	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
1325	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
1326	  && rm -rf "$$dc_destdir" \
1327	  && $(MAKE) $(AM_MAKEFLAGS) dist \
1328	  && rm -rf $(DIST_ARCHIVES) \
1329	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
1330	  && cd "$$am__cwd" \
1331	  || exit 1
1332	$(am__post_remove_distdir)
1333	@(echo "$(distdir) archives ready for distribution: "; \
1334	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
1335	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
1336distuninstallcheck:
1337	@test -n '$(distuninstallcheck_dir)' || { \
1338	  echo 'ERROR: trying to run $@ with an empty' \
1339	       '$$(distuninstallcheck_dir)' >&2; \
1340	  exit 1; \
1341	}; \
1342	$(am__cd) '$(distuninstallcheck_dir)' || { \
1343	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
1344	  exit 1; \
1345	}; \
1346	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
1347	   || { echo "ERROR: files left after uninstall:" ; \
1348	        if test -n "$(DESTDIR)"; then \
1349	          echo "  (check DESTDIR support)"; \
1350	        fi ; \
1351	        $(distuninstallcheck_listfiles) ; \
1352	        exit 1; } >&2
1353distcleancheck: distclean
1354	@if test '$(srcdir)' = . ; then \
1355	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
1356	  exit 1 ; \
1357	fi
1358	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
1359	  || { echo "ERROR: files left in build directory after distclean:" ; \
1360	       $(distcleancheck_listfiles) ; \
1361	       exit 1; } >&2
1362check-am: all-am
1363check: $(BUILT_SOURCES)
1364	$(MAKE) $(AM_MAKEFLAGS) check-recursive
1365all-am: Makefile $(PROGRAMS) $(LIBRARIES) $(MANS) $(DATA) $(HEADERS) \
1366		config.h
1367installdirs: installdirs-recursive
1368installdirs-am:
1369	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(htmldir)"; do \
1370	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
1371	done
1372install: $(BUILT_SOURCES)
1373	$(MAKE) $(AM_MAKEFLAGS) install-recursive
1374install-exec: $(BUILT_SOURCES)
1375	$(MAKE) $(AM_MAKEFLAGS) install-exec-recursive
1376install-data: install-data-recursive
1377uninstall: uninstall-recursive
1378
1379install-am: all-am
1380	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1381
1382installcheck: installcheck-recursive
1383install-strip:
1384	if test -z '$(STRIP)'; then \
1385	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1386	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1387	      install; \
1388	else \
1389	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1390	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1391	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
1392	fi
1393mostlyclean-generic:
1394
1395clean-generic:
1396	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
1397
1398distclean-generic:
1399	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1400	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1401	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
1402
1403maintainer-clean-generic:
1404	@echo "This command is intended for maintainers to use"
1405	@echo "it deletes files that may require special tools to rebuild."
1406	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
1407clean: clean-recursive
1408
1409clean-am: clean-binPROGRAMS clean-generic clean-libexecPROGRAMS \
1410	clean-libtool clean-noinstLIBRARIES clean-sbinPROGRAMS \
1411	mostlyclean-am
1412
1413distclean: distclean-recursive
1414	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
1415		-rm -f ./$(DEPDIR)/crypto.Po
1416	-rm -f ./$(DEPDIR)/kod_management.Po
1417	-rm -f ./$(DEPDIR)/log.Po
1418	-rm -f ./$(DEPDIR)/main.Po
1419	-rm -f ./$(DEPDIR)/networking.Po
1420	-rm -f ./$(DEPDIR)/sntp-opts.Po
1421	-rm -f ./$(DEPDIR)/sntp.Po
1422	-rm -f ./$(DEPDIR)/utilities.Po
1423	-rm -f ./$(DEPDIR)/version.Po
1424	-rm -f Makefile
1425distclean-am: clean-am distclean-compile distclean-generic \
1426	distclean-hdr distclean-libtool distclean-tags
1427
1428dvi: dvi-recursive
1429
1430dvi-am:
1431
1432html: html-recursive
1433
1434html-am:
1435
1436info: info-recursive
1437
1438info-am:
1439
1440install-data-am: install-data-local install-htmlDATA install-man
1441
1442install-dvi: install-dvi-recursive
1443
1444install-dvi-am:
1445
1446install-exec-am: install-binPROGRAMS install-libexecPROGRAMS \
1447	install-sbinPROGRAMS
1448	@$(NORMAL_INSTALL)
1449	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
1450install-html: install-html-recursive
1451
1452install-html-am:
1453
1454install-info: install-info-recursive
1455
1456install-info-am:
1457
1458install-man: install-man1 install-man8
1459
1460install-pdf: install-pdf-recursive
1461
1462install-pdf-am:
1463
1464install-ps: install-ps-recursive
1465
1466install-ps-am:
1467
1468installcheck-am:
1469
1470maintainer-clean: maintainer-clean-recursive
1471	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
1472	-rm -rf $(top_srcdir)/autom4te.cache
1473		-rm -f ./$(DEPDIR)/crypto.Po
1474	-rm -f ./$(DEPDIR)/kod_management.Po
1475	-rm -f ./$(DEPDIR)/log.Po
1476	-rm -f ./$(DEPDIR)/main.Po
1477	-rm -f ./$(DEPDIR)/networking.Po
1478	-rm -f ./$(DEPDIR)/sntp-opts.Po
1479	-rm -f ./$(DEPDIR)/sntp.Po
1480	-rm -f ./$(DEPDIR)/utilities.Po
1481	-rm -f ./$(DEPDIR)/version.Po
1482	-rm -f Makefile
1483maintainer-clean-am: distclean-am maintainer-clean-generic
1484
1485mostlyclean: mostlyclean-recursive
1486
1487mostlyclean-am: mostlyclean-compile mostlyclean-generic \
1488	mostlyclean-libtool
1489
1490pdf: pdf-recursive
1491
1492pdf-am:
1493
1494ps: ps-recursive
1495
1496ps-am:
1497
1498uninstall-am: uninstall-binPROGRAMS uninstall-htmlDATA \
1499	uninstall-libexecPROGRAMS uninstall-man uninstall-sbinPROGRAMS
1500
1501uninstall-man: uninstall-man1 uninstall-man8
1502
1503.MAKE: $(am__recursive_targets) all check install install-am \
1504	install-exec install-exec-am install-strip
1505
1506.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
1507	am--depfiles am--refresh check check-am clean \
1508	clean-binPROGRAMS clean-cscope clean-generic \
1509	clean-libexecPROGRAMS clean-libtool clean-noinstLIBRARIES \
1510	clean-sbinPROGRAMS cscope cscopelist-am ctags ctags-am dist \
1511	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
1512	dist-xz dist-zip dist-zstd distcheck distclean \
1513	distclean-compile distclean-generic distclean-hdr \
1514	distclean-libtool distclean-tags distcleancheck distdir \
1515	distuninstallcheck dvi dvi-am html html-am info info-am \
1516	install install-am install-binPROGRAMS install-data \
1517	install-data-am install-data-local install-dvi install-dvi-am \
1518	install-exec install-exec-am install-exec-hook install-html \
1519	install-html-am install-htmlDATA install-info install-info-am \
1520	install-libexecPROGRAMS install-man install-man1 install-man8 \
1521	install-pdf install-pdf-am install-ps install-ps-am \
1522	install-sbinPROGRAMS install-strip installcheck \
1523	installcheck-am installdirs installdirs-am maintainer-clean \
1524	maintainer-clean-generic mostlyclean mostlyclean-compile \
1525	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
1526	tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \
1527	uninstall-htmlDATA uninstall-libexecPROGRAMS uninstall-man \
1528	uninstall-man1 uninstall-man8 uninstall-sbinPROGRAMS
1529
1530.PRECIOUS: Makefile
1531
1532
1533install-data-local: install-html
1534
1535FRC:
1536	@: FRC "force" depends on nothing and is not a file, so is always
1537	@: out-of-date causing targets which depend on it to also be
1538	@: outdated so their rules to fire each time they are built.
1539
1540version.c: Makefile $(srcdir)/scm-rev
1541	$(AM_V_GEN)env CSET=`cat $(srcdir)/scm-rev` $(top_builddir)/../scripts/build/mkver sntp
1542
1543check-autogen-version.def: FRC
1544	@cd $(srcdir)							\
1545	&& test -r ../include/autogen-version.def			\
1546	&& ( if cmp -s ../include/autogen-version.def autogen-version.def; \
1547	   then : ;							\
1548	   else cp ../include/autogen-version.def autogen-version.def;	 \
1549		echo "Installing new sntp/autogen-version.def file";	\
1550	   fi )
1551
1552$(srcdir)/autogen-version.def:
1553	$(MAKE) $(AM_MAKEFLAGS) check-autogen-version.def
1554
1555built-sources-only: $(BUILT_SOURCES)
1556	@: do-nothing action to avoid default SCCS get
1557
1558check-scm-rev: $(srcdir)/scm-rev
1559	@: do-nothing
1560
1561$(srcdir)/scm-rev: FRC
1562	$(AM_V_at)-bk root $(srcdir) >/dev/null 2>&1 &&			\
1563	    cd $(srcdir)/.. &&						\
1564	    x=`bk -R prs -hr+ -nd:I: ChangeSet` &&			\
1565	    y=`cat sntp/scm-rev 2>/dev/null` || true &&			\
1566	    case "$$x" in ''|$$y) ;; *) echo $$x > sntp/scm-rev ;; esac
1567
1568$(srcdir)/m4/version.m4: $(srcdir)/../packageinfo.sh
1569	TEMPDIR=`pwd` && export TEMPDIR && cd $(srcdir) && \
1570	../scripts/build/genver m4/version.m4
1571
1572$(srcdir)/include/version.def: $(srcdir)/../packageinfo.sh
1573	TEMPDIR=`pwd` && export TEMPDIR && cd $(srcdir) && \
1574	../scripts/build/genver include/version.def
1575
1576$(srcdir)/include/version.texi: $(srcdir)/../packageinfo.sh
1577	TEMPDIR=`pwd` && export TEMPDIR && cd $(srcdir) && \
1578	../scripts/build/genver include/version.texi
1579
1580$(srcdir)/../COPYRIGHT:
1581	cd .. && $(MAKE) $(AM_MAKEFLAGS) COPYRIGHT-please
1582
1583check-COPYRIGHT-submake: $(srcdir)/../COPYRIGHT
1584	@cmp -s $(srcdir)/../COPYRIGHT $(srcdir)/COPYRIGHT	\
1585	 || { cp $(srcdir)/../COPYRIGHT $(srcdir)		\
1586	      && echo 'updated sntp/COPYRIGHT installed' ;}
1587	@echo 'submake avoided if this file is newer than parent COPYRIGHT' > $@
1588
1589check-COPYRIGHT: FRC
1590	[ ! -r $(srcdir)/../COPYRIGHT ]					\
1591	|| [ check-COPYRIGHT-submake -nt $(srcdir)/../COPYRIGHT ]	\
1592	|| $(MAKE) $(AM_MAKEFLAGS) check-COPYRIGHT-submake
1593
1594$(srcdir)/COPYRIGHT: check-COPYRIGHT
1595	@: do-nothing action to prevent any default
1596
1597$(srcdir)/sntp-opts.h: $(srcdir)/sntp-opts.c
1598	@: do-nothing action to avoid default SCCS get, .h built with .c
1599
1600$(srcdir)/sntp-opts.c: $(srcdir)/sntp-opts.def $(std_def_list)
1601	$(AM_V_GEN)$(run_ag) sntp-opts.def
1602
1603###
1604
1605$(srcdir)/sntp.1sntpman: $(srcdir)/sntp-opts.def $(std_def_list)
1606	$(AM_V_GEN)$(run_ag) -DMAN_SECTION=1sntpman -Tagman-cmd.tpl sntp-opts.def
1607
1608$(srcdir)/sntp.man.in: $(srcdir)/sntp.1sntpman $(srcdir)/scripts/mansec2subst.sed
1609	sed -f $(srcdir)/scripts/mansec2subst.sed $(srcdir)/sntp.1sntpman > $(srcdir)/sntp.man.in+
1610	mv $(srcdir)/sntp.man.in+ $(srcdir)/sntp.man.in
1611
1612###
1613
1614$(srcdir)/sntp.1sntpmdoc: $(srcdir)/sntp-opts.def $(std_def_list)
1615	$(AM_V_GEN)$(run_ag) -DMAN_SECTION=1sntpmdoc -Tagmdoc-cmd.tpl sntp-opts.def
1616
1617$(srcdir)/sntp.mdoc.in: $(srcdir)/sntp.1sntpmdoc $(srcdir)/scripts/mansec2subst.sed
1618	sed -f $(srcdir)/scripts/mansec2subst.sed $(srcdir)/sntp.1sntpmdoc > $(srcdir)/sntp.mdoc.in+
1619	mv $(srcdir)/sntp.mdoc.in+ $(srcdir)/sntp.mdoc.in
1620
1621###
1622
1623sntp.$(SNTP_MS): $(srcdir)/sntp.$(MANTAGFMT).in $(top_builddir)/config.status
1624	$(top_builddir)/config.status --file=sntp.$(SNTP_MS)+:$(srcdir)/sntp.$(MANTAGFMT).in
1625	mv sntp.$(SNTP_MS)+ sntp.$(SNTP_MS)
1626
1627###
1628
1629$(srcdir)/invoke-sntp.menu: $(srcdir)/invoke-sntp.texi
1630	@: do-nothing action to avoid default SCCS get, .menu built with .texi
1631
1632$(srcdir)/invoke-sntp.texi: $(srcdir)/sntp-opts.def $(std_def_list)
1633	$(AM_V_GEN)$(run_ag) -Tagtexi-cmd.tpl -DLEVEL=section sntp-opts.def
1634	$(top_srcdir)/../scripts/build/check--help $@
1635
1636$(srcdir)/sntp.html: $(srcdir)/invoke-sntp.texi $(srcdir)/sntp.texi $(srcdir)/include/version.texi
1637	cd $(srcdir) && ( makeinfo --force --html --no-split -o sntp.html sntp.texi || true )
1638
1639libtool: $(LIBTOOL_DEPS)
1640	./config.status --recheck
1641
1642# HMS: libevent/ is a target if it's in EXTRA_DIST via NTP_FORCE_LIBEVENT_DIST.
1643# Note that libevent/ is already in DIST_SUBDIRS (implicit in Makefile.am
1644# but explicit in Makefile.in).  This check doesn't help with distclean.
1645libevent: distdir-pre-check
1646
1647# HMS: Stops the build for gmake or pmake
1648distdir-pre-check:
1649	case "$(DIST_FAIL)" in	\
1650	 '')  ;;		\
1651	 *) $(error re-run configure adding $(DIST_FAIL) if you want to make a distribution.);	\
1652	    echo "re-run configure adding $(DIST_FAIL) if you want to make a distribution.";	\
1653	    exit 1 ;;		\
1654	esac
1655
1656install-exec-hook:
1657	@test -z "${bin_PROGRAMS}${bin_SCRIPTS}"		\
1658	|| for i in ${bin_PROGRAMS} ${bin_SCRIPTS} " "; do	\
1659	   test ! -f ${sbindir}/$$i				\
1660		|| echo "*** $$i is also in ${sbindir}!";	\
1661	done
1662	@test -z "${sbin_PROGRAMS}${asbin_SCRIPTS}"		\
1663	|| for i in ${sbin_PROGRAMS} ${sbin_SCRIPTS} " "; do	\
1664	   test ! -f ${bindir}/$$i				\
1665		|| echo "*** $$i is also in ${bindir}!";	\
1666	done
1667
1668#
1669
1670check-libntp: $(top_builddir)/../libntp/libntp.a
1671	@: avoid default SCCS get by some make implementations
1672
1673$(top_builddir)/../libntp/libntp.a:
1674	cd $(top_builddir)/../libntp && $(MAKE) $(AM_MAKEFLAGS) libntp.a
1675
1676check-libopts: libopts/libopts.la
1677	@echo stamp > $@
1678
1679libopts/libopts.la:
1680	-cd libopts && $(MAKE) $(AM_MAKEFLAGS) libopts.la
1681$(DEPDIR)/deps-ver: $(top_srcdir)/deps-ver
1682	@[ -f $@ ] ||							\
1683		cp $(top_srcdir)/deps-ver $@
1684	@[ -w $@ ] ||							\
1685		chmod u+w $@
1686	@cmp $(top_srcdir)/deps-ver $@ > /dev/null || (			\
1687		$(MAKE) $(AM_MAKEFLAGS) clean &&			\
1688		echo -n "Prior $(subdir)/$(DEPDIR) version " &&		\
1689		cat $@ &&						\
1690		rm -rf $(DEPDIR) &&					\
1691		mkdir $(DEPDIR) && 					\
1692		case "$(top_builddir)" in				\
1693		 .)							\
1694		    ./config.status Makefile depfiles			\
1695		    ;;							\
1696		 *)							\
1697		    cd "$(top_builddir)" &&				\
1698		    ./config.status $(subdir)/Makefile depfiles &&	\
1699		    cd $(subdir)					\
1700		    ;;							\
1701		esac &&							\
1702		echo -n "Cleaned $(subdir)/$(DEPDIR) version " &&	\
1703		cat $(top_srcdir)/deps-ver				\
1704	)
1705	$(AM_V_at)cp $(top_srcdir)/deps-ver $@
1706
1707.deps-ver: $(top_srcdir)/deps-ver
1708	@[ ! -d $(DEPDIR) ] || $(MAKE) $(AM_MAKEFLAGS) $(DEPDIR)/deps-ver
1709	@touch $@
1710
1711#
1712# depsver.mf	included in Makefile.am for directories with .deps
1713#
1714# When building in the same directory with sources that change over
1715# time, such as when tracking using bk, the .deps files can become
1716# stale with respect to moved, deleted, or superceded headers.  Most
1717# commonly, this would exhibit as make reporting a failure to make a
1718# header file which is no longer in the location given.  To address
1719# this issue, we use a deps-ver file which is updated with each change
1720# that breaks old .deps files.  A copy of deps-ver is made into
1721# $(DEPDIR) if not already present.  If $(DEPDIR)/deps-ver is present
1722# with different contents than deps-ver, we make clean to ensure all
1723# .o files built before the incompatible change are rebuilt along with
1724# their updated .deps files, then remove $(DEPDIR) and recreate it as
1725# empty stubs.
1726#
1727# It is normal when configured with --disable-dependency-tracking for
1728# the DEPDIR to not have been created.  For this reason, we use the
1729# intermediate target .deps-ver, which invokes make recursively if
1730# DEPDIR exists.
1731#
1732# If you modify depsver.mf, please make the changes to the master
1733# copy, the one in sntp is copied by the bootstrap script from it.
1734#
1735# This comment block follows rather than leads the related rules so that
1736# it stays with it in the generated Makefile.in and Makefile.
1737#
1738
1739# Tell versions [3.59,3.63) of GNU make to not export all variables.
1740# Otherwise a system limit (for SysV at least) may be exceeded.
1741.NOEXPORT:
1742