xref: /freebsd/contrib/nvi/vi/v_mark.c (revision b8ba871b)

/*-
 * Copyright (c) 1992, 1993, 1994
 *	The Regents of the University of California.  All rights reserved.
 * Copyright (c) 1992, 1993, 1994, 1995, 1996
 *	Keith Bostic.  All rights reserved.
 *
 * See the LICENSE file for redistribution information.
 */

#include "config.h"

#include <sys/types.h>
#include <sys/queue.h>
#include <sys/time.h>

#include <bitstring.h>
#include <limits.h>
#include <stdlib.h>
#include <stdio.h>

#include "../common/common.h"
#include "vi.h"

enum which {BQMARK, FQMARK};
static int mark(SCR *, VICMD *, int, enum which);

/*
 * v_mark -- m[a-z]
 *	Set a mark.
 *
 * PUBLIC: int v_mark(SCR *, VICMD *);
 */
int
v_mark(SCR *sp, VICMD *vp)
{
	return (mark_set(sp, vp->character, &vp->m_start, 1));
}

/*
 * v_bmark -- `['`a-z]
 *	Move to a mark.
 *
 * Moves to a mark, setting both row and column.
 *
 * !!!
 * Although not commonly known, the "'`" and "'`" forms are historically
 * valid.  The behavior is determined by the first character, so "`'" is
 * the same as "``".  Remember this fact -- you'll be amazed at how many
 * people don't know it and will be delighted that you are able to tell
 * them.
 *
 * PUBLIC: int v_bmark(SCR *, VICMD *);
 */
int
v_bmark(SCR *sp, VICMD *vp)
{
	return (mark(sp, vp, 1, BQMARK));
}

/*
 * v_fmark -- '['`a-z]
 *	Move to a mark.
 *
 * Move to the first nonblank character of the line containing the mark.
 *
 * PUBLIC: int v_fmark(SCR *, VICMD *);
 */
int
v_fmark(SCR *sp, VICMD *vp)
{
	return (mark(sp, vp, 1, FQMARK));
}

/*
 * v_emark -- <mouse click>
 *	Mouse mark.
 *
 * PUBLIC: int v_emark(SCR *, VICMD *);
 */
int
v_emark(SCR *sp, VICMD *vp)
{
	SMAP *smp;

	smp = HMAP + vp->ev.e_lno;
	if (smp > TMAP) {
		msgq(sp, M_BERR, "320|Unknown cursor position.");
		return (1);
	}
	vp->m_stop.lno = smp->lno;
	vp->m_stop.cno =
	    vs_colpos(sp, smp->lno, vp->ev.e_cno + (smp->soff - 1) * sp->cols);
	return (mark(sp, vp, 0, BQMARK));
}

/*
 * mark --
 *	Mark commands.
 */
static int
mark(SCR *sp, VICMD *vp, int getmark, enum which cmd)
{
	dir_t dir;
	MARK m;
	size_t len;

	if (getmark && mark_get(sp, vp->character, &vp->m_stop, M_BERR))
		return (1);

	/*
	 * !!!
	 * Historically, BQMARKS for character positions that no longer
	 * existed acted as FQMARKS.
	 *
	 * FQMARKS move to the first non-blank.
	 */
	switch (cmd) {
	case BQMARK:
		if (db_get(sp, vp->m_stop.lno, DBG_FATAL, NULL, &len))
			return (1);
		if (vp->m_stop.cno < len ||
		    (vp->m_stop.cno == len && len == 0))
			break;

		if (ISMOTION(vp))
			F_SET(vp, VM_LMODE);
		cmd = FQMARK;
		/* FALLTHROUGH */
	case FQMARK:
		vp->m_stop.cno = 0;
		if (nonblank(sp, vp->m_stop.lno, &vp->m_stop.cno))
			return (1);
		break;
	default:
		abort();
	}

	/* Non-motion commands move to the end of the range. */
	if (!ISMOTION(vp)) {
		vp->m_final = vp->m_stop;
		return (0);
	}

	/*
	 * !!!
	 * If a motion component to a BQMARK, the cursor has to move.
	 */
	if (cmd == BQMARK &&
	    vp->m_stop.lno == vp->m_start.lno &&
	    vp->m_stop.cno == vp->m_start.cno) {
		v_nomove(sp);
		return (1);
	}

	/*
	 * If the motion is in the reverse direction, switch the start and
	 * stop MARK's so that it's in a forward direction.  (There's no
	 * reason for this other than to make the tests below easier.  The
	 * code in vi.c:vi() would have done the switch.)  Both forward
	 * and backward motions can happen for any kind of search command.
	 */
	if (vp->m_start.lno > vp->m_stop.lno ||
	    (vp->m_start.lno == vp->m_stop.lno &&
	    vp->m_start.cno > vp->m_stop.cno)) {
		m = vp->m_start;
		vp->m_start = vp->m_stop;
		vp->m_stop = m;
		dir = BACKWARD;
	} else
		dir = FORWARD;

	/*
	 * Yank cursor motion, when associated with marks as motion commands,
	 * historically behaved as follows:
	 *
	 * ` motion			' motion
	 *		Line change?		Line change?
	 *		Y	N		Y	N
	 *	      --------------	      ---------------
	 * FORWARD:  |	NM	NM	      | NM	NM
	 *	     |			      |
	 * BACKWARD: |	M	M	      | M	NM(1)
	 *
	 * where NM means the cursor didn't move, and M means the cursor
	 * moved to the mark.
	 *
	 * As the cursor was usually moved for yank commands associated
	 * with backward motions, this implementation regularizes it by
	 * changing the NM at position (1) to be an M.  This makes mark
	 * motions match search motions, which is probably A Good Thing.
	 *
	 * Delete cursor motion was always to the start of the text region,
	 * regardless.  Ignore other motion commands.
	 */
	vp->m_final = vp->m_start;

	/*
	 * Forward marks are always line oriented, and it's set in the
	 * vcmd.c table.
	 */
	if (cmd == FQMARK)
		return (0);

	/*
	 * BQMARK'S moving backward and starting at column 0, and ones moving
	 * forward and ending at column 0 are corrected to the last column of
	 * the previous line.  Otherwise, adjust the starting/ending point to
	 * the character before the current one (this is safe because we know
	 * the search had to move to succeed).
	 *
	 * Mark motions become line mode opertions if they start at the first
	 * nonblank and end at column 0 of another line.
	 */
	if (vp->m_start.lno < vp->m_stop.lno && vp->m_stop.cno == 0) {
		if (db_get(sp, --vp->m_stop.lno, DBG_FATAL, NULL, &len))
			return (1);
		vp->m_stop.cno = len ? len - 1 : 0;
		len = 0;
		if (nonblank(sp, vp->m_start.lno, &len))
			return (1);
		if (vp->m_start.cno <= len)
			F_SET(vp, VM_LMODE);
	} else
		--vp->m_stop.cno;

	return (0);
}