1<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
2
3<refentry>
4  <refentryinfo>
5    <date>07 August 2019</date>
6  </refentryinfo>
7
8  <refmeta>
9    <refentrytitle>eapol_test</refentrytitle>
10    <manvolnum>8</manvolnum>
11  </refmeta>
12  <refnamediv>
13    <refname>eapol_test</refname>
14
15    <refpurpose>EAP peer and RADIUS client testing</refpurpose>
16  </refnamediv>
17
18  <refsynopsisdiv>
19    <cmdsynopsis>
20      <command>eapol_test</command>
21      <arg>-nWS</arg>
22      <arg>-c<replaceable>config file</replaceable></arg>
23      <arg>-a<replaceable>server IP address</replaceable></arg>
24      <arg>-A<replaceable>client IP address</replaceable></arg>
25      <arg>-p<replaceable>UDP port</replaceable></arg>
26      <arg>-s<replaceable>shared secret</replaceable></arg>
27      <arg>-r<replaceable>re-authentications</replaceable></arg>
28      <arg>-t<replaceable>timeout</replaceable></arg>
29      <arg>-C<replaceable>Connect-Info</replaceable></arg>
30      <arg>-M<replaceable>MAC address</replaceable></arg>
31      <arg>-o<replaceable>file</replaceable></arg>
32      <arg>-N<replaceable>attr spec</replaceable></arg>
33    </cmdsynopsis>
34    <cmdsynopsis>
35      <command>eapol_test scard</command>
36    </cmdsynopsis>
37    <cmdsynopsis>
38      <command>eapol_test sim</command>
39      <arg>PIN</arg>
40      <arg>num triplets</arg>
41    </cmdsynopsis>
42  </refsynopsisdiv>
43
44  <refsect1>
45    <title>Overview</title>
46
47    <para>eapol_test is a program that links together the same EAP
48    peer implementation that wpa_supplicant is using and the RADIUS
49    authentication client code from hostapd. In addition, it has
50    minimal glue code to combine these two components in similar
51    ways to IEEE 802.1X/EAPOL Authenticator state machines. In other
52    words, it integrates IEEE 802.1X Authenticator (normally, an
53    access point) and IEEE 802.1X Supplicant (normally, a wireless
54    client) together to generate a single program that can be used to
55    test EAP methods without having to setup an access point and a
56    wireless client.</para>
57
58    <para>The main uses for eapol_test are in interoperability testing
59    of EAP methods against RADIUS servers and in development testing
60    for new EAP methods. It can be easily used to automate EAP testing
61    for interoperability and regression since the program can be run
62    from shell scripts without require additional test components apart
63    from a RADIUS server. For example, the automated EAP tests described
64    in eap_testing.txt are implemented with eapol_test. Similarly,
65    eapol_test could be used to implement an automated regression
66    test suite for a RADIUS authentication server.</para>
67
68
69    <para>As an example:</para>
70
71<blockquote><programlisting>
72eapol_test -ctest.conf -a127.0.0.1 -p1812 -ssecret -r1
73</programlisting></blockquote>
74
75    <para>tries to complete EAP authentication based on the network
76    configuration from test.conf against the RADIUS server running
77    on the local host. A re-authentication is triggered to test fast
78    re-authentication. The configuration file uses the same format for
79    network blocks as wpa_supplicant.</para>
80
81  </refsect1>
82  <refsect1>
83    <title>Command Arguments</title>
84    <variablelist>
85      <varlistentry>
86	<term>-c configuration file path</term>
87
88	<listitem><para>A configuration to use.  The configuration should
89	use the same format for network blocks as wpa_supplicant.
90	</para></listitem>
91      </varlistentry>
92
93      <varlistentry>
94	<term>-a AS address</term>
95
96	<listitem><para>IP address of the authentication server.  The
97	default is '127.0.0.1'.</para></listitem>
98      </varlistentry>
99
100      <varlistentry>
101	<term>-A client address</term>
102
103	<listitem><para>IP address of the client.  The default is to
104	select an address automatically.</para></listitem>
105      </varlistentry>
106
107      <varlistentry>
108	<term>-p AS port</term>
109
110	<listitem><para>UDP port of the authentication server. The
111	default is '1812'.</para></listitem>
112      </varlistentry>
113
114      <varlistentry>
115	<term>-s AS secret</term>
116
117	<listitem><para>Shared secret with the authentication server.
118	The default is 'radius'.</para></listitem>
119      </varlistentry>
120
121      <varlistentry>
122	<term>-r count</term>
123
124	<listitem><para>Number of reauthentications.</para></listitem>
125      </varlistentry>
126
127      <varlistentry>
128	<term>-t timeout</term>
129
130	<listitem><para>Timeout in seconds. The default is 30.</para></listitem>
131      </varlistentry>
132
133      <varlistentry>
134	<term>-C info</term>
135
136	<listitem><para>RADIUS Connect-Info.  The default is
137	'CONNECT 11Mbps 802.11b'.</para></listitem>
138      </varlistentry>
139
140
141      <varlistentry>
142	<term>-M mac address</term>
143
144	<listitem><para>Client MAC address (Calling-Station-Id).  The
145	default is '02:00:00:00:00:01'.</para></listitem>
146      </varlistentry>
147
148      <varlistentry>
149	<term>-o file</term>
150
151	<listitem><para>Location to write out server certificate.
152	</para></listitem>
153      </varlistentry>
154
155      <varlistentry>
156	<term>-N attr spec</term>
157
158	<listitem><para>Send arbitrary attribute specific by
159	attr_id:syntax:value, or attr_id alone.  attr_id should be the numeric
160	ID of the attribute, and syntax should be one of 's' (string),
161	'd' (integer), or 'x' (octet string). The value is the attribute value
162	to send.  When attr_id is given alone, NULL is used as the attribute
163	value.  Multiple attributes can be specified by using the option
164	several times.</para></listitem>
165      </varlistentry>
166
167      <varlistentry>
168	<term>-n</term>
169
170	<listitem><para>Indicates that no MPPE keys are expected.
171	</para></listitem>
172      </varlistentry>
173
174      <varlistentry>
175	<term>-W</term>
176
177	<listitem><para>Wait for a control interface monitor before starting.
178	</para></listitem>
179      </varlistentry>
180
181      <varlistentry>
182	<term>-S</term>
183
184	<listitem><para>Save configuration after authentication.
185	</para></listitem>
186      </varlistentry>
187
188    </variablelist>
189  </refsect1>
190  <refsect1>
191    <title>See Also</title>
192    <para>
193      <citerefentry>
194	<refentrytitle>wpa_supplicant</refentrytitle>
195	<manvolnum>8</manvolnum>
196      </citerefentry>
197    </para>
198  </refsect1>
199  <refsect1>
200    <title>Legal</title>
201    <para>wpa_supplicant is copyright (c) 2003-2022,
202    Jouni Malinen <email>j@w1.fi</email> and
203    contributors.
204    All Rights Reserved.</para>
205
206    <para>This program is licensed under the BSD license (the one with
207    advertisement clause removed).</para>
208  </refsect1>
209</refentry>
210