1 /* 2 * Copyright 2018-2021 The OpenSSL Project Authors. All Rights Reserved. 3 * Copyright (c) 2018-2019, Oracle and/or its affiliates. All rights reserved. 4 * 5 * Licensed under the Apache License 2.0 (the "License"). You may not use 6 * this file except in compliance with the License. You can obtain a copy 7 * in the file LICENSE in the source distribution or at 8 * https://www.openssl.org/source/license.html 9 */ 10 11 #include <openssl/err.h> 12 #include <openssl/bn.h> 13 #include "crypto/bn.h" 14 #include "rsa_local.h" 15 16 /* 17 * Part of the RSA keypair test. 18 * Check the Chinese Remainder Theorem components are valid. 19 * 20 * See SP800-5bBr1 21 * 6.4.1.2.3: rsakpv1-crt Step 7 22 * 6.4.1.3.3: rsakpv2-crt Step 7 23 */ 24 int ossl_rsa_check_crt_components(const RSA *rsa, BN_CTX *ctx) 25 { 26 int ret = 0; 27 BIGNUM *r = NULL, *p1 = NULL, *q1 = NULL; 28 29 /* check if only some of the crt components are set */ 30 if (rsa->dmp1 == NULL || rsa->dmq1 == NULL || rsa->iqmp == NULL) { 31 if (rsa->dmp1 != NULL || rsa->dmq1 != NULL || rsa->iqmp != NULL) 32 return 0; 33 return 1; /* return ok if all components are NULL */ 34 } 35 36 BN_CTX_start(ctx); 37 r = BN_CTX_get(ctx); 38 p1 = BN_CTX_get(ctx); 39 q1 = BN_CTX_get(ctx); 40 if (q1 != NULL) { 41 BN_set_flags(r, BN_FLG_CONSTTIME); 42 BN_set_flags(p1, BN_FLG_CONSTTIME); 43 BN_set_flags(q1, BN_FLG_CONSTTIME); 44 ret = 1; 45 } else { 46 ret = 0; 47 } 48 ret = ret 49 /* p1 = p -1 */ 50 && (BN_copy(p1, rsa->p) != NULL) 51 && BN_sub_word(p1, 1) 52 /* q1 = q - 1 */ 53 && (BN_copy(q1, rsa->q) != NULL) 54 && BN_sub_word(q1, 1) 55 /* (a) 1 < dP < (p – 1). */ 56 && (BN_cmp(rsa->dmp1, BN_value_one()) > 0) 57 && (BN_cmp(rsa->dmp1, p1) < 0) 58 /* (b) 1 < dQ < (q - 1). */ 59 && (BN_cmp(rsa->dmq1, BN_value_one()) > 0) 60 && (BN_cmp(rsa->dmq1, q1) < 0) 61 /* (c) 1 < qInv < p */ 62 && (BN_cmp(rsa->iqmp, BN_value_one()) > 0) 63 && (BN_cmp(rsa->iqmp, rsa->p) < 0) 64 /* (d) 1 = (dP . e) mod (p - 1)*/ 65 && BN_mod_mul(r, rsa->dmp1, rsa->e, p1, ctx) 66 && BN_is_one(r) 67 /* (e) 1 = (dQ . e) mod (q - 1) */ 68 && BN_mod_mul(r, rsa->dmq1, rsa->e, q1, ctx) 69 && BN_is_one(r) 70 /* (f) 1 = (qInv . q) mod p */ 71 && BN_mod_mul(r, rsa->iqmp, rsa->q, rsa->p, ctx) 72 && BN_is_one(r); 73 BN_clear(r); 74 BN_clear(p1); 75 BN_clear(q1); 76 BN_CTX_end(ctx); 77 return ret; 78 } 79 80 /* 81 * Part of the RSA keypair test. 82 * Check that (√2)(2^(nbits/2 - 1) <= p <= 2^(nbits/2) - 1 83 * 84 * See SP800-5bBr1 6.4.1.2.1 Part 5 (c) & (g) - used for both p and q. 85 * 86 * (√2)(2^(nbits/2 - 1) = (√2/2)(2^(nbits/2)) 87 */ 88 int ossl_rsa_check_prime_factor_range(const BIGNUM *p, int nbits, BN_CTX *ctx) 89 { 90 int ret = 0; 91 BIGNUM *low; 92 int shift; 93 94 nbits >>= 1; 95 shift = nbits - BN_num_bits(&ossl_bn_inv_sqrt_2); 96 97 /* Upper bound check */ 98 if (BN_num_bits(p) != nbits) 99 return 0; 100 101 BN_CTX_start(ctx); 102 low = BN_CTX_get(ctx); 103 if (low == NULL) 104 goto err; 105 106 /* set low = (√2)(2^(nbits/2 - 1) */ 107 if (!BN_copy(low, &ossl_bn_inv_sqrt_2)) 108 goto err; 109 110 if (shift >= 0) { 111 /* 112 * We don't have all the bits. ossl_bn_inv_sqrt_2 contains a rounded up 113 * value, so there is a very low probability that we'll reject a valid 114 * value. 115 */ 116 if (!BN_lshift(low, low, shift)) 117 goto err; 118 } else if (!BN_rshift(low, low, -shift)) { 119 goto err; 120 } 121 if (BN_cmp(p, low) <= 0) 122 goto err; 123 ret = 1; 124 err: 125 BN_CTX_end(ctx); 126 return ret; 127 } 128 129 /* 130 * Part of the RSA keypair test. 131 * Check the prime factor (for either p or q) 132 * i.e: p is prime AND GCD(p - 1, e) = 1 133 * 134 * See SP800-56Br1 6.4.1.2.3 Step 5 (a to d) & (e to h). 135 */ 136 int ossl_rsa_check_prime_factor(BIGNUM *p, BIGNUM *e, int nbits, BN_CTX *ctx) 137 { 138 int ret = 0; 139 BIGNUM *p1 = NULL, *gcd = NULL; 140 141 /* (Steps 5 a-b) prime test */ 142 if (BN_check_prime(p, ctx, NULL) != 1 143 /* (Step 5c) (√2)(2^(nbits/2 - 1) <= p <= 2^(nbits/2 - 1) */ 144 || ossl_rsa_check_prime_factor_range(p, nbits, ctx) != 1) 145 return 0; 146 147 BN_CTX_start(ctx); 148 p1 = BN_CTX_get(ctx); 149 gcd = BN_CTX_get(ctx); 150 if (gcd != NULL) { 151 BN_set_flags(p1, BN_FLG_CONSTTIME); 152 BN_set_flags(gcd, BN_FLG_CONSTTIME); 153 ret = 1; 154 } else { 155 ret = 0; 156 } 157 ret = ret 158 /* (Step 5d) GCD(p-1, e) = 1 */ 159 && (BN_copy(p1, p) != NULL) 160 && BN_sub_word(p1, 1) 161 && BN_gcd(gcd, p1, e, ctx) 162 && BN_is_one(gcd); 163 164 BN_clear(p1); 165 BN_CTX_end(ctx); 166 return ret; 167 } 168 169 /* 170 * See SP800-56Br1 6.4.1.2.3 Part 6(a-b) Check the private exponent d 171 * satisfies: 172 * (Step 6a) 2^(nBit/2) < d < LCM(p–1, q–1). 173 * (Step 6b) 1 = (d*e) mod LCM(p–1, q–1) 174 */ 175 int ossl_rsa_check_private_exponent(const RSA *rsa, int nbits, BN_CTX *ctx) 176 { 177 int ret; 178 BIGNUM *r, *p1, *q1, *lcm, *p1q1, *gcd; 179 180 /* (Step 6a) 2^(nbits/2) < d */ 181 if (BN_num_bits(rsa->d) <= (nbits >> 1)) 182 return 0; 183 184 BN_CTX_start(ctx); 185 r = BN_CTX_get(ctx); 186 p1 = BN_CTX_get(ctx); 187 q1 = BN_CTX_get(ctx); 188 lcm = BN_CTX_get(ctx); 189 p1q1 = BN_CTX_get(ctx); 190 gcd = BN_CTX_get(ctx); 191 if (gcd != NULL) { 192 BN_set_flags(r, BN_FLG_CONSTTIME); 193 BN_set_flags(p1, BN_FLG_CONSTTIME); 194 BN_set_flags(q1, BN_FLG_CONSTTIME); 195 BN_set_flags(lcm, BN_FLG_CONSTTIME); 196 BN_set_flags(p1q1, BN_FLG_CONSTTIME); 197 BN_set_flags(gcd, BN_FLG_CONSTTIME); 198 ret = 1; 199 } else { 200 ret = 0; 201 } 202 ret = (ret 203 /* LCM(p - 1, q - 1) */ 204 && (ossl_rsa_get_lcm(ctx, rsa->p, rsa->q, lcm, gcd, p1, q1, 205 p1q1) == 1) 206 /* (Step 6a) d < LCM(p - 1, q - 1) */ 207 && (BN_cmp(rsa->d, lcm) < 0) 208 /* (Step 6b) 1 = (e . d) mod LCM(p - 1, q - 1) */ 209 && BN_mod_mul(r, rsa->e, rsa->d, lcm, ctx) 210 && BN_is_one(r)); 211 212 BN_clear(r); 213 BN_clear(p1); 214 BN_clear(q1); 215 BN_clear(lcm); 216 BN_clear(gcd); 217 BN_CTX_end(ctx); 218 return ret; 219 } 220 221 /* 222 * Check exponent is odd. 223 * For FIPS also check the bit length is in the range [17..256] 224 */ 225 int ossl_rsa_check_public_exponent(const BIGNUM *e) 226 { 227 #ifdef FIPS_MODULE 228 int bitlen; 229 230 bitlen = BN_num_bits(e); 231 return (BN_is_odd(e) && bitlen > 16 && bitlen < 257); 232 #else 233 /* Allow small exponents larger than 1 for legacy purposes */ 234 return BN_is_odd(e) && BN_cmp(e, BN_value_one()) > 0; 235 #endif /* FIPS_MODULE */ 236 } 237 238 /* 239 * SP800-56Br1 6.4.1.2.1 (Step 5i): |p - q| > 2^(nbits/2 - 100) 240 * i.e- numbits(p-q-1) > (nbits/2 -100) 241 */ 242 int ossl_rsa_check_pminusq_diff(BIGNUM *diff, const BIGNUM *p, const BIGNUM *q, 243 int nbits) 244 { 245 int bitlen = (nbits >> 1) - 100; 246 247 if (!BN_sub(diff, p, q)) 248 return -1; 249 BN_set_negative(diff, 0); 250 251 if (BN_is_zero(diff)) 252 return 0; 253 254 if (!BN_sub_word(diff, 1)) 255 return -1; 256 return (BN_num_bits(diff) > bitlen); 257 } 258 259 /* 260 * return LCM(p-1, q-1) 261 * 262 * Caller should ensure that lcm, gcd, p1, q1, p1q1 are flagged with 263 * BN_FLG_CONSTTIME. 264 */ 265 int ossl_rsa_get_lcm(BN_CTX *ctx, const BIGNUM *p, const BIGNUM *q, 266 BIGNUM *lcm, BIGNUM *gcd, BIGNUM *p1, BIGNUM *q1, 267 BIGNUM *p1q1) 268 { 269 return BN_sub(p1, p, BN_value_one()) /* p-1 */ 270 && BN_sub(q1, q, BN_value_one()) /* q-1 */ 271 && BN_mul(p1q1, p1, q1, ctx) /* (p-1)(q-1) */ 272 && BN_gcd(gcd, p1, q1, ctx) 273 && BN_div(lcm, NULL, p1q1, gcd, ctx); /* LCM((p-1, q-1)) */ 274 } 275 276 /* 277 * SP800-56Br1 6.4.2.2 Partial Public Key Validation for RSA refers to 278 * SP800-89 5.3.3 (Explicit) Partial Public Key Validation for RSA 279 * caveat is that the modulus must be as specified in SP800-56Br1 280 */ 281 int ossl_rsa_sp800_56b_check_public(const RSA *rsa) 282 { 283 int ret = 0, status; 284 int nbits; 285 BN_CTX *ctx = NULL; 286 BIGNUM *gcd = NULL; 287 288 if (rsa->n == NULL || rsa->e == NULL) 289 return 0; 290 291 nbits = BN_num_bits(rsa->n); 292 #ifdef FIPS_MODULE 293 /* 294 * (Step a): modulus must be 2048 or 3072 (caveat from SP800-56Br1) 295 * NOTE: changed to allow keys >= 2048 296 */ 297 if (!ossl_rsa_sp800_56b_validate_strength(nbits, -1)) { 298 ERR_raise(ERR_LIB_RSA, RSA_R_INVALID_KEY_LENGTH); 299 return 0; 300 } 301 #endif 302 if (!BN_is_odd(rsa->n)) { 303 ERR_raise(ERR_LIB_RSA, RSA_R_INVALID_MODULUS); 304 return 0; 305 } 306 /* (Steps b-c): 2^16 < e < 2^256, n and e must be odd */ 307 if (!ossl_rsa_check_public_exponent(rsa->e)) { 308 ERR_raise(ERR_LIB_RSA, RSA_R_PUB_EXPONENT_OUT_OF_RANGE); 309 return 0; 310 } 311 312 ctx = BN_CTX_new_ex(rsa->libctx); 313 gcd = BN_new(); 314 if (ctx == NULL || gcd == NULL) 315 goto err; 316 317 /* (Steps d-f): 318 * The modulus is composite, but not a power of a prime. 319 * The modulus has no factors smaller than 752. 320 */ 321 if (!BN_gcd(gcd, rsa->n, ossl_bn_get0_small_factors(), ctx) 322 || !BN_is_one(gcd)) { 323 ERR_raise(ERR_LIB_RSA, RSA_R_INVALID_MODULUS); 324 goto err; 325 } 326 327 ret = ossl_bn_miller_rabin_is_prime(rsa->n, 0, ctx, NULL, 1, &status); 328 #ifdef FIPS_MODULE 329 if (ret != 1 || status != BN_PRIMETEST_COMPOSITE_NOT_POWER_OF_PRIME) { 330 #else 331 if (ret != 1 || (status != BN_PRIMETEST_COMPOSITE_NOT_POWER_OF_PRIME 332 && (nbits >= RSA_MIN_MODULUS_BITS 333 || status != BN_PRIMETEST_COMPOSITE_WITH_FACTOR))) { 334 #endif 335 ERR_raise(ERR_LIB_RSA, RSA_R_INVALID_MODULUS); 336 ret = 0; 337 goto err; 338 } 339 340 ret = 1; 341 err: 342 BN_free(gcd); 343 BN_CTX_free(ctx); 344 return ret; 345 } 346 347 /* 348 * Perform validation of the RSA private key to check that 0 < D < N. 349 */ 350 int ossl_rsa_sp800_56b_check_private(const RSA *rsa) 351 { 352 if (rsa->d == NULL || rsa->n == NULL) 353 return 0; 354 return BN_cmp(rsa->d, BN_value_one()) >= 0 && BN_cmp(rsa->d, rsa->n) < 0; 355 } 356 357 /* 358 * RSA key pair validation. 359 * 360 * SP800-56Br1. 361 * 6.4.1.2 "RSAKPV1 Family: RSA Key - Pair Validation with a Fixed Exponent" 362 * 6.4.1.3 "RSAKPV2 Family: RSA Key - Pair Validation with a Random Exponent" 363 * 364 * It uses: 365 * 6.4.1.2.3 "rsakpv1 - crt" 366 * 6.4.1.3.3 "rsakpv2 - crt" 367 */ 368 int ossl_rsa_sp800_56b_check_keypair(const RSA *rsa, const BIGNUM *efixed, 369 int strength, int nbits) 370 { 371 int ret = 0; 372 BN_CTX *ctx = NULL; 373 BIGNUM *r = NULL; 374 375 if (rsa->p == NULL 376 || rsa->q == NULL 377 || rsa->e == NULL 378 || rsa->d == NULL 379 || rsa->n == NULL) { 380 ERR_raise(ERR_LIB_RSA, RSA_R_INVALID_REQUEST); 381 return 0; 382 } 383 /* (Step 1): Check Ranges */ 384 if (!ossl_rsa_sp800_56b_validate_strength(nbits, strength)) 385 return 0; 386 387 /* If the exponent is known */ 388 if (efixed != NULL) { 389 /* (2): Check fixed exponent matches public exponent. */ 390 if (BN_cmp(efixed, rsa->e) != 0) { 391 ERR_raise(ERR_LIB_RSA, RSA_R_INVALID_REQUEST); 392 return 0; 393 } 394 } 395 /* (Step 1.c): e is odd integer 65537 <= e < 2^256 */ 396 if (!ossl_rsa_check_public_exponent(rsa->e)) { 397 /* exponent out of range */ 398 ERR_raise(ERR_LIB_RSA, RSA_R_PUB_EXPONENT_OUT_OF_RANGE); 399 return 0; 400 } 401 /* (Step 3.b): check the modulus */ 402 if (nbits != BN_num_bits(rsa->n)) { 403 ERR_raise(ERR_LIB_RSA, RSA_R_INVALID_KEYPAIR); 404 return 0; 405 } 406 407 ctx = BN_CTX_new_ex(rsa->libctx); 408 if (ctx == NULL) 409 return 0; 410 411 BN_CTX_start(ctx); 412 r = BN_CTX_get(ctx); 413 if (r == NULL || !BN_mul(r, rsa->p, rsa->q, ctx)) 414 goto err; 415 /* (Step 4.c): Check n = pq */ 416 if (BN_cmp(rsa->n, r) != 0) { 417 ERR_raise(ERR_LIB_RSA, RSA_R_INVALID_REQUEST); 418 goto err; 419 } 420 421 /* (Step 5): check prime factors p & q */ 422 ret = ossl_rsa_check_prime_factor(rsa->p, rsa->e, nbits, ctx) 423 && ossl_rsa_check_prime_factor(rsa->q, rsa->e, nbits, ctx) 424 && (ossl_rsa_check_pminusq_diff(r, rsa->p, rsa->q, nbits) > 0) 425 /* (Step 6): Check the private exponent d */ 426 && ossl_rsa_check_private_exponent(rsa, nbits, ctx) 427 /* 6.4.1.2.3 (Step 7): Check the CRT components */ 428 && ossl_rsa_check_crt_components(rsa, ctx); 429 if (ret != 1) 430 ERR_raise(ERR_LIB_RSA, RSA_R_INVALID_KEYPAIR); 431 432 err: 433 BN_clear(r); 434 BN_CTX_end(ctx); 435 BN_CTX_free(ctx); 436 return ret; 437 } 438