Automatically generated by Pod::Man 4.14 (Pod::Simple 3.42) Standard preamble: ========================================================================..
..
..
Set up some character translations and predefined strings. \*(-- will give an unbreakable dash, \*(PI will give pi, \*(L" will give a left double quote, and \*(R" will give a right double quote. \*(C+ will give a nicer C++. Capital omega is used to do unbreakable dashes and therefore won't be available. \*(C` and \*(C' expand to `' in nroff, nothing in troff, for use with C<>..tr \(*W-
. ds -- \(*W-
. ds PI pi
. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch
. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch
. ds L" ""
. ds R" ""
. ds C` ""
. ds C' ""
'br\}
. ds -- \|\(em\|
. ds PI \(*p
. ds L" ``
. ds R" ''
. ds C`
. ds C'
'br\}
Escape single quotes in literal strings from groff's Unicode transform. If the F register is >0, we'll generate index entries on stderr for titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index entries marked with X<> in POD. Of course, you'll have to process the output yourself in some meaningful fashion. Avoid warning from groff about undefined register 'F'...
.nr rF 0
. if \nF \{\
. de IX
. tm Index:\\$1\t\\n%\t"\\$2"
..
. if !\nF==2 \{\
. nr % 0
. nr F 2
. \}
. \}
.\}
.rr rF
Fear. Run. Save yourself. No user-serviceable parts.. \" fudge factors for nroff and troff
. ds #H 0
. ds #V .8m
. ds #F .3m
. ds #[ \f1
. ds #]
.\}
. ds #H ((1u-(\\\\n(.fu%2u))*.13m)
. ds #V .6m
. ds #F 0
. ds #[ \&
. ds #] \&
.\}
. \" simple accents for nroff and troff
. ds ' \&
. ds ` \&
. ds ^ \&
. ds , \&
. ds ~ ~
. ds /
.\}
. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
.\}
. \" troff and (daisy-wheel) nroff accents
. \" corrections for vroff
. \" for low resolution devices (crt and lpr)
\{\
. ds : e
. ds 8 ss
. ds o a
. ds d- d\h'-1'\(ga
. ds D- D\h'-1'\(hy
. ds th \o'bp'
. ds Th \o'LP'
. ds ae ae
. ds Ae AE
.\}
======================================================================== Title "BIO_S_DATAGRAM 3ossl" BIO_S_DATAGRAM 3ossl "2023-09-19" "3.0.11" "OpenSSL"
For nroff, turn off justification. Always turn off hyphenation; it makes way too many mistakes in technical documents. "NAME"
BIO_s_datagram, BIO_new_dgram,
BIO_ctrl_dgram_connect,
BIO_ctrl_set_connected,
BIO_dgram_recv_timedout,
BIO_dgram_send_timedout,
BIO_dgram_get_peer,
BIO_dgram_set_peer,
BIO_dgram_get_mtu_overhead - Network BIO with datagram semantics
"SYNOPSIS"
Header "SYNOPSIS" .Vb 1
#include <
openssl/
bio.h>
\&
BIO_METHOD *BIO_s_datagram(void);
BIO *BIO_new_dgram(int fd, int close_flag);
\&
int BIO_ctrl_dgram_connect(BIO *bio, const BIO_ADDR *peer);
int BIO_ctrl_set_connected(BIO *bio, const BIO_ADDR *peer);
int BIO_dgram_recv_timedout(BIO *bio);
int BIO_dgram_send_timedout(BIO *bio);
int BIO_dgram_get_peer(BIO *bio, BIO_ADDR *peer);
int BIO_dgram_set_peer(BIO *bio, const BIO_ADDR *peer);
int BIO_dgram_get_mtu_overhead(BIO *bio);
.Ve
"DESCRIPTION"
Header "DESCRIPTION" \fBBIO_s_datagram() is a \s-1BIO\s0 implementation designed for use with network sockets
which provide datagram semantics, such as \s-1UDP\s0 sockets. It is suitable for use
with DTLSv1.
Because BIO_s_datagram() has datagram semantics, a single BIO_write() call sends
a single datagram and a single BIO_read() call receives a single datagram. If
the size of the buffer passed to BIO_read() is inadequate, the datagram is
silently truncated.
When using BIO_s_datagram(), it is important to note that:
"\(bu" 4
This \s-1BIO\s0 can be used with either a connected or unconnected network socket. A
connected socket is a network socket which has had
BIO_connect\|(3) or a
similar OS-specific function called on it. Such a socket can only receive
datagrams from the specified peer. Any other socket is an unconnected socket and
can receive datagrams from any host.
"\(bu" 4
Despite their naming,
neither
BIO_ctrl_dgram_connect() nor
BIO_ctrl_set_connected() cause a socket
to become connected. These controls are provided to indicate to the \s-1BIO\s0 how
the underlying socket is configured and how it is to be used; see below.
"\(bu" 4
Use of
BIO_s_datagram() with an unconnected network socket is hazardous hecause
any successful call to
BIO_read() results in the peer address used for any
subsequent call to
BIO_write() being set to the source address of the datagram
received by that call to
BIO_read(). Thus, unless the caller calls
\fBBIO_dgram_set_peer() immediately prior to every call to
BIO_write(), or never
calls
BIO_read(), any host on the network may cause future datagrams written to
be redirected to that host. Therefore, it is recommended that users use
\fBBIO_s_dgram() only with a connected socket. An exception is where
\fBDTLSv1_listen\|(3) must be used; see
DTLSv1_listen\|(3) for further
discussion.
Various controls are available for configuring the BIO_s_datagram() using
\fBBIO_ctrl\|(3):
"BIO_ctrl_dgram_connect (\s-1BIO_CTRL_DGRAM_CONNECT\s0)" 4
Item "BIO_ctrl_dgram_connect (BIO_CTRL_DGRAM_CONNECT)" This is equivalent to calling
BIO_dgram_set_peer\|(3).
.Sp
Despite its name, this function does not cause the underlying socket to become
connected.
"BIO_ctrl_set_connected (\s-1BIO_CTRL_SET_CONNECTED\s0)" 4
Item "BIO_ctrl_set_connected (BIO_CTRL_SET_CONNECTED)" This informs the
BIO_s_datagram() whether the underlying socket has been
connected, and therefore how the
BIO_s_datagram() should attempt to use the
socket.
.Sp
If the
peer argument is non-NULL,
BIO_s_datagram() assumes that the
underlying socket has been connected and will attempt to use the socket using \s-1OS\s0
APIs which do not specify peer addresses (for example,
send\|(3) and
recv\|(3) or
similar). The
peer argument should specify the peer address to which the socket
is connected.
.Sp
If the
peer argument is \s-1NULL,\s0
BIO_s_datagram() assumes that the underlying
socket is not connected and will attempt to use the socket using an \s-1OS\s0 APIs
which specify peer addresses (for example,
sendto\|(3) and
recvfrom\|(3)).
"BIO_dgram_get_peer (\s-1BIO_CTRL_DGRAM_GET_PEER\s0)" 4
Item "BIO_dgram_get_peer (BIO_CTRL_DGRAM_GET_PEER)" This outputs a
\s-1BIO_ADDR\s0 which specifies one of the following values,
whichever happened most recently:
"\(bu" 4
The peer address last passed to
BIO_dgram_set_peer(),
BIO_ctrl_dgram_connect()
or
BIO_ctrl_set_connected().
"\(bu" 4
The peer address of the datagram last received by a call to
BIO_read().
"BIO_dgram_set_peer (\s-1BIO_CTRL_DGRAM_SET_PEER\s0)" 4
Item "BIO_dgram_set_peer (BIO_CTRL_DGRAM_SET_PEER)" Sets the peer address to be used for subsequent writes to this \s-1BIO.\s0
.Sp
Warning: When used with an unconnected network socket, the value set may be
modified by future calls to
BIO_read\|(3), making use of
BIO_s_datagram()
hazardous when used with unconnected network sockets; see above.
"BIO_dgram_recv_timeout (\s-1BIO_CTRL_DGRAM_GET_RECV_TIMER_EXP\s0)" 4
Item "BIO_dgram_recv_timeout (BIO_CTRL_DGRAM_GET_RECV_TIMER_EXP)" Returns 1 if the last I/O operation performed on the \s-1BIO\s0 (for example, via a
call to
BIO_read\|(3)) may have been caused by a receive timeout.
"BIO_dgram_send_timedout (\s-1BIO_CTRL_DGRAM_GET_SEND_TIMER_EXP\s0)" 4
Item "BIO_dgram_send_timedout (BIO_CTRL_DGRAM_GET_SEND_TIMER_EXP)" Returns 1 if the last I/O operation performed on the \s-1BIO\s0 (for example, via a
call to
BIO_write\|(3)) may have been caused by a send timeout.
"BIO_dgram_get_mtu_overhead (\s-1BIO_CTRL_DGRAM_GET_MTU_OVERHEAD\s0)" 4
Item "BIO_dgram_get_mtu_overhead (BIO_CTRL_DGRAM_GET_MTU_OVERHEAD)" Returns a quantity in bytes which is a rough estimate of the number of bytes of
overhead which should typically be added to a datagram payload size in order to
estimate the final size of the Layer 3 (e.g. \s-1IP\s0) packet which will contain the
datagram. In most cases, the maximum datagram payload size which can be
transmitted can be determined by determining the link \s-1MTU\s0 in bytes and
subtracting the value returned by this call.
.Sp
The value returned by this call depends on the network layer protocol being
used.
.Sp
The value returned is not fully reliable because datagram overheads can be
higher in atypical network configurations, for example where IPv6 extension
headers or IPv4 options are used.
"\s-1BIO_CTRL_DGRAM_SET_DONT_FRAG\s0" 4
Item "BIO_CTRL_DGRAM_SET_DONT_FRAG" If
num is nonzero, configures the underlying network socket to enable Don't
Fragment mode, in which datagrams will be set with the \s-1IP\s0 Don't Fragment (\s-1DF\s0)
bit set. If
num is zero, Don't Fragment mode is disabled.
"\s-1BIO_CTRL_DGRAM_QUERY_MTU\s0" 4
Item "BIO_CTRL_DGRAM_QUERY_MTU" Queries the \s-1OS\s0 for its assessment of the Path \s-1MTU\s0 for the destination to which
the underlying network socket, and returns that Path \s-1MTU\s0 in bytes. This control
can only be used with a connected socket.
.Sp
This is not supported on all platforms and depends on \s-1OS\s0 support being
available. Returns 0 on failure.
"\s-1BIO_CTRL_DGRAM_MTU_DISCOVER\s0" 4
Item "BIO_CTRL_DGRAM_MTU_DISCOVER" This control requests that Path \s-1MTU\s0 discovery be enabled on the underlying
network socket.
"\s-1BIO_CTRL_DGRAM_GET_FALLBACK_MTU\s0" 4
Item "BIO_CTRL_DGRAM_GET_FALLBACK_MTU" Returns the estimated minimum size of datagram payload which should always be
supported on the \s-1BIO.\s0 This size is determined by the minimum \s-1MTU\s0 required to be
supported by the applicable underlying network layer. Use of datagrams of this
size may lead to suboptimal performance, but should be routable in all
circumstances. The value returned is the datagram payload size in bytes and does
not include the size of layer 3 or layer 4 protocol headers.
"\s-1BIO_CTRL_DGRAM_MTU_EXCEEDED\s0" 4
Item "BIO_CTRL_DGRAM_MTU_EXCEEDED" Returns 1 if the last attempted write to the \s-1BIO\s0 failed due to the size of the
attempted write exceeding the applicable \s-1MTU.\s0
"\s-1BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT\s0" 4
Item "BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT" Accepts a pointer to a
struct timeval. If the time specified is zero,
disables receive timeouts. Otherwise, configures the specified time interval as
the receive timeout for the socket for the purposes of future
BIO_read\|(3)
calls.
"\s-1BIO_CTRL_DGRAM_SET_PEEK_MODE\s0" 4
Item "BIO_CTRL_DGRAM_SET_PEEK_MODE" If
num is nonzero, enables peek mode; otherwise, disables peek mode. Where
peek mode is enabled, calls to
BIO_read\|(3) read datagrams from the underlying
network socket in peek mode, meaning that a future call to
BIO_read\|(3) will
yield the same datagram until peek mode is disabled.
\fBBIO_new_dgram() is a helper function which instantiates a BIO_s_datagram() and
sets the \s-1BIO\s0 to use the socket given in fd by calling BIO_set_fd().
"RETURN VALUES"
Header "RETURN VALUES" \fBBIO_s_datagram() returns a \s-1BIO\s0 method.
\fBBIO_new_dgram() returns a \s-1BIO\s0 on success and \s-1NULL\s0 on failure.
\fBBIO_ctrl_dgram_connect(), BIO_ctrl_set_connected(),
\fBBIO_dgram_get_peer(), BIO_dgram_set_peer() return 1 on success and 0 on failure.
\fBBIO_dgram_recv_timedout() and BIO_dgram_send_timedout() return 0 or 1 depending
on the circumstance; see discussion above.
\fBBIO_dgram_get_mtu_overhead() returns a value in bytes.
"SEE ALSO"
Header "SEE ALSO" \fBDTLSv1_listen\|(3),
bio\|(7)
"COPYRIGHT"
Header "COPYRIGHT" Copyright 2022-2023 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the \*(L"License\*(R"). You may not use
this file except in compliance with the License. You can obtain a copy
in the file \s-1LICENSE\s0 in the source distribution or at
<https://www.openssl.org/source/license.html>.