1.\" Copyright (c) 1998-2002 Katsushi Kobayashi and Hidetoshi Shimokawa 2.\" All rights reserved. 3.\" 4.\" Redistribution and use in source and binary forms, with or without 5.\" modification, are permitted provided that the following conditions 6.\" are met: 7.\" 1. Redistributions of source code must retain the above copyright 8.\" notice, this list of conditions and the following disclaimer. 9.\" 2. Redistributions in binary form must reproduce the above copyright 10.\" notice, this list of conditions and the following disclaimer in the 11.\" documentation and/or other materials provided with the distribution. 12.\" 3. All advertising materials mentioning features or use of this software 13.\" must display the acknowledgement as bellow: 14.\" 15.\" This product includes software developed by K. Kobayashi and H. Shimokawa 16.\" 17.\" 4. The name of the author may not be used to endorse or promote products 18.\" derived from this software without specific prior written permission. 19.\" 20.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 21.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 22.\" WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 23.\" DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, 24.\" INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 25.\" (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 26.\" SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 28.\" STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 29.\" ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30.\" POSSIBILITY OF SUCH DAMAGE. 31.\" 32.Dd June 6, 2022 33.Dt FIREWIRE 4 34.Os 35.Sh NAME 36.Nm firewire 37.Nd IEEE1394 High-performance Serial Bus 38.Sh SYNOPSIS 39To compile this driver into the kernel, 40place the following line in your 41kernel configuration file: 42.Bd -ragged -offset indent 43.Cd "device firewire" 44.Ed 45.Pp 46Alternatively, to load the driver as a 47module at boot time, place the following line in 48.Xr loader.conf 5 : 49.Bd -literal -offset indent 50firewire_load="YES" 51.Ed 52.Sh DESCRIPTION 53.Fx 54provides machine-independent bus support and raw drivers for 55.Nm 56interfaces. 57.Pp 58The 59.Nm 60driver consists of two layers: the controller and the 61bus layer. 62The controller attaches to a physical bus 63(like 64.Xr pci 4 ) . 65The 66.Nm 67bus attaches to the controller. 68Additional drivers can be attached to the bus. 69.Pp 70Up to 63 devices, including the host itself, can be attached to 71a 72.Nm 73bus. 74The root node is dynamically assigned with a PHY device function. 75Also, the other 76.Nm 77bus specific parameters, 78e.g., node ID, cycle master, isochronous resource manager and bus 79manager, are dynamically assigned, after bus reset is initiated. 80On the 81.Nm 82bus, every device is identified by an EUI 64 address. 83.Pp 84Debugging over the firewire interface is possible with the 85.Xr dcons 4 86driver. 87Please see 88.Lk https://docs.freebsd.org/en/books/developers-handbook/kerneldebug/#kerneldebug-dcons 89for details on how to setup debugging with firewire. 90.Sh FILES 91.Bl -tag -width "Pa /dev/fwmem0.0" -compact 92.It Pa /dev/fw0.0 93.It Pa /dev/fwmem0.0 94.El 95.Sh SEE ALSO 96.Xr dcons 4 , 97.Xr fwe 4 , 98.Xr fwip 4 , 99.Xr fwohci 4 , 100.Xr pci 4 , 101.Xr sbp 4 , 102.Xr eui64 5 , 103.Xr fwcontrol 8 , 104.Xr kldload 8 , 105.Xr sysctl 8 106.Sh HISTORY 107The 108.Nm 109driver first appeared in 110.Fx 5.0 . 111.Sh AUTHORS 112.An -nosplit 113The 114.Nm 115driver was written by 116.An Katsushi Kobayashi 117and 118.An Hidetoshi Shimokawa 119for the 120.Fx 121project. 122.Sh BUGS 123See 124.Xr fwohci 4 125for security notes. 126