1.\"- 2.\" Copyright (c) 2009 Sam Leffler, Errno Consulting 3.\" All rights reserved. 4.\"" 5.\" Redistribution and use in source and binary forms, with or without 6.\" modification, are permitted provided that the following conditions 7.\" are met: 8.\" 1. Redistributions of source code must retain the above copyright 9.\" notice, this list of conditions and the following disclaimer, 10.\" without modification. 11.\" 2. Redistributions in binary form must reproduce at minimum a disclaimer 12.\" similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any 13.\" redistribution must be conditioned upon including a substantially 14.\" similar Disclaimer requirement for further binary redistribution. 15.\" 16.\" NO WARRANTY 17.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 18.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19.\" LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY 20.\" AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 21.\" THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, 22.\" OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 23.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 24.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 25.\" IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 26.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 27.\" THE POSSIBILITY OF SUCH DAMAGES. 28.\" 29.\" $FreeBSD$ 30.\" 31.Dd July 10, 2009 32.Dt NET80211 4 33.Os 34.Sh NAME 35.Nm net80211 36.Nd standard interface to IEEE 802.11 devices 37.Sh SYNOPSIS 38.In sys/types.h 39.In sys/socket.h 40.In net/if.h 41.In net/ethernet.h 42.In net80211/ieee80211_ioctl.h 43.Sh DESCRIPTION 44This section describes the standard programming 45interface to configure and retrieve status information 46for IEEE 802.11 devices that depend on the 47.Xr wlan 4 48module for operation. 49The interface is via one 50of the following 51.Xr ioctl 2 52calls on a socket: 53.Bl -tag -width ".Dv SIOCG80211" 54.It Dv SIOCG80211 55Get configuration or status information. 56.It Dv SIOCS80211 57Set configuration information. 58.El 59.Pp 60These requests are made via a modified 61.Vt ifreq 62structure. 63This structure is defined as follows: 64.Bd -literal 65struct ieee80211req { 66 char i_name[IFNAMSIZ]; /* if_name, e.g. "wi0" */ 67 u_int16_t i_type; /* req type */ 68 int16_t i_val; /* Index or simple value */ 69 int16_t i_len; /* Index or simple value */ 70 void *i_data; /* Extra data */ 71}; 72.Ed 73.Pp 74Requests that are not supported by the underlying device return 75-1 and set the global variable errno to 76.Er EOPNOTSUPP . 77.Dv SIOCG80211 78requests that return data to an application place small values in 79.Va i_val 80or in a user-specified buffer pointed to by 81.Va i_data . 82When an indirect buffer is used 83.Va i_len 84specifies how large the indirect buffer is and on return it is set by the 85system to the actual amount of data returned. 86.Dv SIOCS80211 87requests use a similar scheme with data passed to the system taken either 88from 89.Va i_val 90or an indirect buffer pointed to by 91.Va i_data . 92.Pp 93For 94.Dv SIOCG80211 95the following values of 96.Va i_type 97are valid: 98.Bl -tag -width indent 99.It Dv IEEE80211_IOC_AMPDU 100Return whether or not AMPDU is enabled in 101.Va i_val . 102AMPDU is an aggregation scheme that is part of the 802.11n specification 103and is used only when operating on an HT channel. 104The value returned is one of: 1050 (AMPDU disabled), 1061 (AMPDU enabled for transmit), 1072 (AMPDU enabled for receive), 108and 1093 (AMPDU enabled for transmit and receive). 110The 802.11n specification says a compliant station must receive AMPDU but 111may not support transmitting AMPDU frames. 112Disabling AMPDU receive is mainly useful for testing and working around bugs. 113.It Dv IEEE80211_IOC_AMPDU_DENSITY 114Return the minimum density for bursting AMPDU frames in 115.Va i_val . 116The value returned is one of: 1170 (no time restriction), 1181 (1/4 usec), 1192 (1/2 usec), 1203 (1 usec), 1214 (2 usec), 1225 (4 usec), 1236 (8 usec), 124and 1257 (16 usec). 126.It Dv IEEE80211_IOC_AMPDU_LIMIT 127Return the limit on the size of AMPDU frames in 128.Va i_val . 129The value returned is one of: 1300 (8 kilobytes), 1311 (16 kilobytes), 1322 (32 kilobytes), 133and 1343 (64 kilobytes). 135.It Dv IEEE80211_IOC_AMSDU 136Return whether or not AMSDU is enabled in 137.Va i_val . 138AMSDU is an aggregation scheme that is part of the 802.11n specification 139and is used only when operating on an HT channel. 140The value returned is one of: 1410 (AMSDU disabled), 1421 (AMSDU enabled for transmit), 1432 (AMSDU enabled for receive), 144and 1453 (AMSDU enabled for transmit and receive). 146The 802.11n specification says a compliant station must receive AMSDU but 147may not support transmitting AMSDU frames. 148Disabling AMSDU receive is mainly useful for testing and working around bugs. 149.It Dv IEEE80211_IOC_AMSDU_LIMIT 150Return the limit on the size of AMSDU frames in 151.Va i_val . 152The value returned is one of: 1533839 (bytes) 154and 1557935 (bytes). 156Note these values are specified by 802.11n; arbitrary values are not allowed. 157.It Dv IEEE80211_IOC_APBRIDGE 158Return whether AP bridging is enabled in 159.Va i_val . 160Normally packets sent between stations associated 161to the same access point are delivered without going through system layers 162that do packet filtering; when AP bridging is disabled packets are 163passed up the system to be forwarded using some other mechanism. 164This value will be non-zero when AP bridging is enabled and otherwise zero. 165.It Dv IEEE80211_IOC_APPIE 166Return an application information element via 167.Va i_data . 168Application IE's are maintained for many 802.11 frames; the 169request must identify the frame to return an IE for in 170.Va i_val . 171For example, to retrieve the IE sent in each Beacon frame 172.Va i_val 173would be set to 174.Va IEEE80211_FC0_SUBTYPE_BEACON | IEEE80211_FC0_TYPE_MGT . 175If no information element is installed then 176.Er EINVAL 177is returned. 178If the data buffer for returning data is too small to hold the information 179element the value is truncated; this permits querying the presence of 180data by requesting zero bytes of data be returned. 181.It Dv IEEE80211_IOC_AUTHMODE 182Return the current authentication mode in 183.Va i_val . 184Valid values are 185.Dv IEEE80211_AUTH_NONE 186(no authentication), 187.Dv IEEE80211_AUTH_OPEN 188(open authentication), 189.Dv IEEE80211_AUTH_SHARED 190(shared key authentication), 191.Dv IEEE80211_AUTH_8021X 192(802.1x only authentication), 193and 194.Dv IEEE80211_AUTH_WPA 195(WPA/802.11i/802.1x authentication). 196.It Dv IEEE80211_IOC_BEACON_INTERVAL 197Return the time between Beacon frames (in TU) in 198.Va i_val . 199.It Dv IEEE80211_IOC_BGSCAN 200Return whether background scanning is enabled in 201.Va i_val . 202When this value is non-zero and operating in station mode 203the station will periodically leave 204the current channel and scan for neighboring stations. 205See also 206.Dv IEEE80211_IOC_BGSCAN_IDLE 207and 208.Dv IEEE80211_IOC_BGSCAN_INTERVAL . 209.It Dv IEEE80211_IOC_BGSCAN_IDLE 210Return in 211.Va i_val 212the minimum time (msecs) a station must be idle 213(i.e. not transmitting or receiving frames) 214before it will do a background scan. 215See also 216.Dv IEEE80211_IOC_BGSCAN_INTERVAL . 217.It Dv IEEE80211_IOC_BGSCAN_INTERVAL 218Return in 219.Va i_val 220the minimum time (seconds) between background scan operations. 221See also 222.Dv IEEE80211_IOC_BGSCAN_IDLE . 223.It Dv IEEE80211_IOC_BMISSTHRESHOLD 224Return in 225.Va i_val 226the number of consecutive missed Beacon frames before the system will 227attempt to roam to a different/better access point. 228.It Dv IEEE80211_IOC_BSSID 229Return the MAC address for the current BSS identifier via 230.Va i_data . 231When the interface is running, the bssid is either the value 232configured locally (e.g. for an IBSS network started by the local station) 233or the value adopted when joining an existing network. 234For WDS interfaces this value is the address of the remote station. 235When the interface is not running, the bssid returned is the desired 236bssid, if any, that has been configured. 237.It Dv IEEE80211_IOC_BURST 238Return whether or not packet bursting is enabled in 239.Va i_val . 240If this value is non-zero then the system will try to send packets closely 241spaced to improve throughput. 242.It Dv IEEE80211_IOC_CHANINFO 243Return the set of available channels via 244.Va i_data . 245Note this data should be used by user applications to map between 246channel specifications (frequency and attributes) and IEEE channel numbers 247as user applications may not have the necessary information to do 248this directly (e.g. for 900MHz radios, operation in the Public Safety Band). 249.It Dv IEEE80211_IOC_CHANLIST 250Return the current list of usable channels via 251.Va i_data . 252The channel list is returned as a bit vector with bit N set to 1 if 253IEEE channel number N is available for use. 254.It Dv IEEE80211_IOC_CHANNEL 255Return the IEEE channel number of the current channel in 256.Va i_val . 257Note this request is deprecated; use 258.Dv IEEE80211_IOC_CURCHAN 259instead. 260.It Dv IEEE80211_IOC_COUNTERMEASURES 261Return whether TKIP Countermeasures are enabled in 262.Va i_val . 263This value will be non-zero when Countermeasures are enabled and 264otherwise zero. 265.It Dv IEEE80211_IOC_CURCHAN 266Return information for the current channel via 267.Va i_data . 268This information includes the IEEE channel number, the frequency, and 269attributes that describe the operating constraints (e.g. Passive Scan, 270DFS, usage restrictions). 271.It Dv IEEE80211_IOC_DEVCAPS 272Return device capabilities in the data buffer pointed at by 273.Va i_data . 274The buffer must be large enough to return the number of available 275channels but otherwise may be made small to limit how much information 276is returned. 277.It Dv IEEE80211_IOC_DFS 278Return whether or not Dynamic Frequency Selection (DFS) is enabled in 279.Va i_val . 280DFS embodies several facilities including detection of overlapping 281radar signals, dynamic transmit power control, and channel selection 282according to a least-congested criteria. 283DFS support is mandatory for some 5Ghz frequencies in certain 284locales (e.g. ETSI). 285By default DFS is enabled according to the regulatory definitions 286and the current country code, regdomain, and channel. 287.It Dv IEEE80211_IOC_DOTD 288Return whether or not 802.11d support is enabled in 289.Va i_val . 290When 802.11d is enabled in station mode, Beacon frames that advertise 291a country code different than the currently configured country code will 292cause an event to be dispatched to user applications. 293This event can be used by the station to adopt that country code and 294operate according to the associated regulatory constraints. 295When operating as an access point with 802.11d enabled the Beacon and 296ProbeResponse frames transmitted will advertise the current regulatory 297domain settings. 298.It Dv IEEE80211_IOC_DOTH 299Return whether 802.11h support is enabled in 300.Va i_val . 301When 802.11h is enabled Beacon and ProbeResponse frames will have 302the SpectrumMgt bit set in the capabilities field and 303country and power constraint information elements will be present. 304802.11h support also includes handling Channel Switch Announcements (CSA) 305which are a mechanism to coordinate channel changes by an access point. 306By default 802.11h is enabled if the device is capable. 307.It Dv IEEE80211_IOC_DROPUNENCRYPTED 308Return, in 309.Va i_val , 310whether unencrypted packets transmit/received should be discarded. 311This value will be zero if unencrypted packets will be accepted and 312non-zero if they are to be discarded. 313.It Dv IEEE80211_IOC_DTIM_PERIOD 314Return the period (in beacon intervals) between DTIM events in 315.Va i_val . 316.It Dv IEEE80211_IOC_DWDS 317Return, in 318.Va i_val , 319whether or not Dynamic WDS support is enabled. 320Dynamic WDS is a facility by which packets may be tunneled over normal 321Infrastructure BSS associations using 4-address (WDS) frames. 322.It Dv IEEE80211_IOC_FF 323Return, in 324.Va i_val , 325whether Atheros fast-frames support is enabled. 326Fast-frames is a non-standard protocol extension that aggregates multiple 327frames to improve throughput. 328Note that enabling fast-frames support does not guarantee use; 329the client and access point must negotiate its use. 330.It Dv IEEE80211_IOC_FRAGTHRESHOLD 331Return, in 332.Va i_val , 333the threshold (in bytes) for enabling fragmentation frames. 334Packets larger than this value will automatically be split into multiple 335fragmented frames that are sent one after the other. 336.It Dv IEEE80211_IOC_GREENFIELD 337Return, in 338.Va i_val , 339whether or not Greenfield preamble use is enabled. 340This setting is meaningful only when operating with 802.11n on an HT channel. 341.It Dv IEEE80211_IOC_HIDESSID 342Return, in 343.Va i_val , 344whether SSID hiding/cloaking is enabled. 345SSID hiding is only meaningful when operating as an access point. 346When this is enabled Beacon frames do not include the SSID and 347ProbeRequest frames are not answered unless they include the AP's SSID. 348This value will be non-zero when SSID hiding is enabled and otherwise zero. 349.It Dv IEEE80211_IOC_HTCOMPAT 350Return, in 351.Va i_val , 352whether or not 802.11n compatibility support is enabled. 353The 802.11n protocol specification went through several incompatible iterations. 354Some vendors implemented 11n support to older specifications that 355will not interoperate with a purely 11n-compliant station. 356In particular the information elements included in management frames 357for old devices are different. 358When compatibility support is enabled both standard and compatible data 359will be provided and/or accepted. 360.It Dv IEEE80211_IOC_HTCONF 361Return the setting for automatic promotion of HT channels in 362.Va i_val . 363Promotion happens when the system must select a channel and may choose 364between legacy, HT20, and HT40 operation (e.g. when scanning). 365Valid values are: 3660 (do not promote, use legacy), 3671 (promote to HT20), 368and 3692 (promote to HT40), 370.It Dv IEEE80211_IOC_HTPROTMODE 371Return, in 372.Va i_val , 373the technique used to protect HT frames in a mixed 802.11n network. 374Valid values are: 375.Dv IEEE80211_PROTMODE_OFF 376(no protection enabled) 377and 378.Dv IEEE80211_PROTMODE_RTSCTS 379(send RTS and wait for CTS). 380.It Dv IEEE80211_IOC_HWMP_MAXHOPS 381Return the maximum acceptable hop count in an HWMP path in 382.Va i_val . 383.It Dv IEEE80211_IOC_HWMP_ROOTMODE 384Return the setting for Mesh root mode operation in 385.Va i_val . 386Valid values are: 387.Dv IEEE80211_HWMP_ROOTMODE_DISABLED 388(root mode is disabled), 389.Dv IEEE80211_HWMP_ROOTMODE_NORMAL 390(send broadcast Path Request frames), 391.Dv IEEE80211_HWMP_ROOTMODE_PROACTIVE 392(send broadcast Path Request frames and force replies) 393and 394.Dv IEEE80211_HWMP_ROOTMODE_RANN 395(send broadcast Root Announcement (RANN) frames). 396.It Dv IEEE80211_IOC_INACTIVITY 397Return whether or not the system handles inactivity processing in 398.Va i_val . 399When inactivity processing is enabled the system will track stations 400that have not transmitted frames and periodically probe them to 401check if they are still present. 402Stations that are inactive and do not respond to probes are dropped. 403.It Dv IEEE80211_IOC_MACCMD 404Return information about the state of the MAC address 405access control list (ACL) system. 406There are two requests supported: 407.Dv IEEE80211_MACCMD_POLICY 408(to retrieve the current policy in 409.Va i_val ), 410and 411.Dv IEEE80211_MACCMD_LIST 412to retrieve the list installed/active ACL's via 413.Va i_data . 414The 415.Xr wlan_acl 4 416module must be installed and enabled or 417.Er EINVAL 418will be returned. 419.It Dv IEEE80211_IOC_MESH_AP 420Return whether or not Mesh AP support is enabled in 421.Va i_val . 422.It Dv IEEE80211_IOC_MESH_ID 423Return the Mesh ID in the buffer pointed to by 424.Va i_data . 425.It Dv IEEE80211_IOC_MESH_FWRD 426Return whether or not packet forwarding support is enabled in 427.Va i_val . 428.It Dv IEEE80211_IOC_MESH_PP_METRIC 429Return the link metric protocol in the buffer pointed to by 430.Va i_data . 431.It Dv IEEE80211_IOC_MESH_PP_PATH 432Return the path selection protocol in the buffer pointed to by 433.Va i_data . 434.It Dv IEEE80211_IOC_MESH_RTCMD 435Return information about the state of the Mesh routing tables. 436One request is supported: 437.Dv IEEE80211_MESH_RTCMD_LIST 438to retrieve the contents of the routing table in the buffer pointed to by 439.Va i_data . 440.It Dv IEEE80211_IOC_MESH_TTL 441Return, in 442.Va i_val , 443the Mesh Time To Live (TTL) setting installed in packets 444transmitted by this mesh node. 445.It Dv IEEE80211_IOC_NUMSSIDS 446Return the number of SSIDs supported in 447.Va i_val . 448.It Dv IEEE80211_IOC_NUMWEPKEYS 449Return the number of WEP keys supported in 450.Va i_val 451.It Dv IEEE80211_IOC_POWERSAVE 452Return the current powersaving mode in 453.Va i_val . 454Valid values are 455.Dv IEEE80211_POWERSAVE_OFF 456(power save operation is disabled) 457and 458.Dv IEEE80211_POWERSAVE_ON 459(power save operation is enabled). 460.It Dv IEEE80211_IOC_POWERSAVESLEEP 461Return the powersave sleep time in TU in 462.Va i_val . 463This value is also termed the listen interval and represents the maximum time 464a station will sleep before waking to retrieve packets buffered by 465an access point. 466.It Dv IEEE80211_IOC_PRIVACY 467Return the current MLME setting for PRIVACY in 468.Va i_val . 469When PRIVACY is enabled all data packets must be encrypted. 470This value will be zero if PRIVACY is disabled and 471non-zero when PRIVACY is enabled. 472.It Dv IEEE80211_IOC_PROTMODE 473Return the current 802.11g protection mode in 474.Va i_val . 475Protection is the mechanism used to safeguard 802.11b stations operating 476on an 802.11g network. 477Valid values are 478.Dv IEEE80211_PROTMODE_OFF 479(no protection enabled), 480.Dv IEEE80211_PROTMODE_CTS 481(send CTS to yourself), 482and 483.Dv IEEE80211_PROTMODE_RTSCTS 484(send RTS and wait for CTS). 485.It Dv IEEE80211_IOC_PUREG 486Return whether ``pure 11g'' mode is enabled in 487.Va i_val . 488This setting is meaningful only for access point operation; 489when non-zero, 802.11b stations will not be allowed to associate. 490.It Dv IEEE80211_IOC_PUREN 491Return whether ``pure 11n'' mode is enabled in 492.Va i_val . 493This setting is meaningful only for access point operation; 494when non-zero, legacy (non-11n capable) stations will not be 495allowed to associate. 496.It Dv IEEE80211_IOC_REGDOMAIN 497Return the regulatory state in the buffer pointed to by 498.Va i_data . 499.It Dv IEEE80211_IOC_RIFS 500Return whether or not Reduced InterFrame Spacing (RIFS) is enabled in 501.Va i_val . 502This setting is meaningful only when operating with 802.11n on an HT channel. 503.It Dv IEEE80211_IOC_ROAM 504Return station roaming parameters in the buffer pointed to by 505.Va i_data . 506.It Dv IEEE80211_IOC_ROAMING 507Return the current roaming mode in 508.Va i_val . 509Roaming mode specifies which entity controls operation of the MLME 510state machine when operating as a station in an Infrastructure BSS. 511Valid values are: 512.Dv IEEE80211_ROAMING_DEVICE 513(driver/firmware is in control), 514.Dv IEEE80211_ROAMING_AUTO 515(host 802.11 layer is in control), 516and 517.Dv IEEE80211_ROAMING_MANUAL 518(application is in control). 519.It Dv IEEE80211_IOC_RTSTHRESHOLD 520Return the threshold (in bytes) for enabling transmission of RTS frames in 521.Va i_val . 522Packets larger than this value will automatically have an RTS frame 523sent preceding it to reduce the likelihood of packet loss. 524.It Dv IEEE80211_IOC_SCAN_RESULTS 525Return the current contents of the scan cache in the data area pointed to by 526.Va i_data . 527.It Dv IEEE80211_IOC_SCANVALID 528Return in 529.Va i_val 530how long (in seconds) results from a scan operation will be considered valid. 531When scan results are no longer valid and they are needed (e.g. to roam) the 532system will initiate a scan operation to replenish the scan cache. 533.It Dv IEEE80211_IOC_SHORTGI 534Return whether or not Short Guard Interval (SGI) is enabled in 535.Va i_val . 536Note SGI is only used when operating with 802.11n on an HT channel. 537.It Dv IEEE80211_IOC_SMPS 538Return the Spatial Multiplexing Power Save (SMPS) setting in 539.Va i_val . 540This setting is meaningful only when operating with 802.11n on an HT channel. 541Valid values are: 542.Dv IEEE80211_HTCAP_SMPS_DYNAMIC 543(Dynamic SMPS is enabled), 544.Dv IEEE80211_HTCAP_SMPS_ENA 545(Static SMPS is enabled), 546and 547.Dv IEEE80211_HTCAP_SMPS_OFF 548(SMPS is disabled). 549.It Dv IEEE80211_IOC_SSID 550Return the requested SSID in the buffer pointed to by 551.Va i_data . 552If 553.Va i_val 554is \(>= 0 then the request refers to the configured value for that slot. 555Generally, 0 is the only valid value, but some interfaces support more 556SSIDs. 557.It Dv IEEE80211_IOC_STA_INFO 558Return information about the current state of the specified station(s) via 559.Va i_data . 560The MAC address of a single station may be passed in or, if the broadcast 561address is supplied, information about all stations will be returned. 562If a single station is requested and the MAC address is unknown then 563.Er ENOENT 564will be returned. 565.It Dv IEEE80211_IOC_STA_STATS 566Return collected statistics for the specified station via 567.Va i_data . 568The MAC address of the desired station is passed in; if it is unknown 569.Er ENOENT 570will be returned. 571.It Dv IEEE80211_IOC_STA_VLAN 572Return any VLAN tag assigned to a station via 573.Va i_data . 574.It Dv IEEE80211_IOC_TDMA_SLOT 575Return the slot number for the station in 576.Va i_val . 577Slot number zero is the master station in a TDMA network. 578.It Dv IEEE80211_IOC_TDMA_SLOTCNT 579Return the count of slots in the TDMA network in 580.Va i_val . 581.It Dv IEEE80211_IOC_TDMA_SLOTLEN 582Return the length (in usecs) of the TDMA slot assigned to each 583station in the network in 584.Va i_val . 585.It Dv IEEE80211_IOC_TDMA_BINTERVAL 586Return the number of superframes between Beacon frames in 587.Va i_val . 588A TDMA network with N slots and slot length T has a superframe of NxT. 589.It Dv IEEE80211_IOC_TSN 590Return whether or not Transitional Security Network (TSN) is enabled in 591.Va i_val . 592.It Dv IEEE80211_IOC_TURBOP 593Return whether Atheros Dynamic Turbo mode is enabled in 594.Va i_val . 595Dynamic Turbo mode is a non-standard protocol extension available only 596on Atheros devices where channel width is dynamically 597changed between 20MHz and 40MHz. 598Note that enabling Dynamic Turbo mode support does not guarantee use; 599both client and access point must use Atheros devices and support must 600be enabled on both sides. 601.It Dv IEEE80211_IOC_TXPARAMS 602Return transmit parameters in the buffer pointed to by 603.Va i_data . 604.It Dv IEEE80211_IOC_TXPOWER 605Return the transmit power limit in .5 dBm units in 606.Va i_val . 607This value represents the effective maximum and is calculated according to 608the maximum power allowed by local regulations, any user-specified 609power limit, and the maximum power the device is capable of. 610.It Dv IEEE80211_IOC_TXPOWMAX 611Return the user-specified maximum transmit power in .5 dBm units in 612.Va i_val . 613The maximum setting is applied after any regulatory cap. 614.It Dv IEEE80211_IOC_WEP 615Return the current WEP status in 616.Va i_val . 617Valid values are: 618.Dv IEEE80211_WEP_ON 619(enabled for all packets sent and received), 620.Dv IEEE80211_WEP_OFF 621(disabled), 622and 623.Dv IEEE80211_WEP_MIXED 624(enabled for transmit and receive but also willing to receive 625unencrypted frames). 626This request is deprecated; use 627.Dv IEEE80211_IOC_PRIVACY 628and 629.Dv IEEE80211_IOC_UNENCRYPTED 630instead. 631.It Dv IEEE80211_IOC_WEPKEY 632Return the requested WEP key via 633.Va i_data . 634The key number is specified in 635.Va i_val 636and may be 0-3. 637If the device does not support returning the WEP key or the user is not 638root then the key may be returned as all zeros. 639This request is deprecated in favor of 640.Dv IEEE80211_IOC_WPAKEY . 641.It Dv IEEE80211_IOC_WEPTXKEY 642Return the number of the WEP key used for transmission in 643.Va i_val . 644.It Dv IEEE80211_IOC_WME 645Return whether 802.11e/WME/WMM support is enabled in 646.Va i_val . 647This value will be non-zero when support is enabled and otherwise zero. 648.It Dv IEEE80211_IOC_WME_CWMIN 649Return the WME CWmin setting (log2) for the specified Access Class (AC) in 650.Va i_val . 651The AC is passed in through 652.Va i_len 653together with an optional IEEE80211_WMEPARAM_BSS flag to indicate if the 654parameter for the BSS or the channel is desired. 655If WME is not supported then 656.Er EINVAL 657will be returned. 658.It Dv IEEE80211_IOC_WME_CWMAX 659Return the WME CWmax setting (log2) for the specified Access Class (AC) in 660.Va i_val . 661See 662.Dv IEEE80211_IOC_WME_CWMIN 663above for more details. 664.It Dv IEEE80211_IOC_WME_AIFS 665Return the WME AIFS setting for the specified Access Class (AC) in 666.Va i_val . 667See 668.Dv IEEE80211_IOC_WME_CWMIN 669above for more details. 670.It Dv IEEE80211_IOC_WME_TXOPLIMIT 671Return the WME TxOpLimit (msec) for the specified Access Class (AC) in 672.Va i_val . 673See 674.Dv IEEE80211_IOC_WME_CWMIN 675above for more details. 676.It Dv IEEE80211_IOC_WME_ACM 677Return the WME Admission Control Mechanism (ACM) setting 678for the specified Access Class (AC) in 679.Va i_val . 680This value is meaningful only for the BSS (not channel). 681See 682.Dv IEEE80211_IOC_WME_CWMIN 683above for more details. 684.It Dv IEEE80211_IOC_WME_ACKPOLICY 685Return the WME ACK Policy setting 686for the specified Access Class (AC) in 687.Va i_val . 688When this value is zero frames will be transmitted without waiting for 689an Acknowledgement. 690This value is meaningful only for the channel (not BSS). 691See 692.Dv IEEE80211_IOC_WME_CWMIN 693above for more details. 694.It Dv IEEE80211_IOC_WPA 695Return the WPA configuration in 696.Va i_val . 697Valid values are 6980 (WPA is not enabled), 6991 (WPA1 is enabled), 7002 (WPA2/802.11i is enabled), 701and 7023 (WPA1 and WPA2/802.11i are both enabled). 703.It Dv IEEE80211_IOC_WPAIE 704Return any WPA information element for an associated station via 705.Va i_data . 706The request passed in through 707.Va i_data 708identifies the MAC address of the desired station. 709If an RSN (802.11i) element is present it is returned; otherwise any WPA 710element is returned. 711Note this request is deprecated; use 712.Dv IEEE80211_IOC_WPAIE2 713instead. 714.It Dv IEEE80211_IOC_WPAIE2 715Return any WPA information elements for an associated station via 716.Va i_data . 717The request passed in through 718.Va i_data 719identifies the MAC address of the desired station. 720One or both of RSN (802.11i) and WPA elements may be returned. 721.It Dv IEEE80211_IOC_WPAKEY 722Return the requested cryptographic key in the buffer pointed to by 723.Va i_data . 724The key number is specified in 725.Va i_val 726and may be 0-3. 727A key number of zero is used to retrieve a station's unicast cipher key 728when operating with WPA enabled. 729If the user is not root then the key data returned is all zeros. 730.It Dv IEEE80211_IOC_WPS 731Return whether or not Wi-FI Protected Setup (WPS) is enabled in 732.Va i_val . 733.El 734.Pp 735For 736.Dv SIOCS80211 737the following values of 738.Va i_type 739are valid. 740Note that changing a value on an interface that is running may 741cause the interface to be 742.Sq reset . 743Resets may be handled without altering the state if the parameter 744does not affect the MLME state (e.g. RTS threshold), but in some 745cases the interface may need to scan for a new network or clear 746state (including any associated stations); in that case the interface 747is said to be 748.Sq restarted 749(it is equivalent to marking the interface down and back up). 750The information below identifies whether changing a value affects the 751state of a running interface. 752.Bl -tag -width indent 753.It Dv IEEE80211_IOC_ADDMAC 754Add an entry to the MAC address Access Control List (ACL) database using 755the value pointed to by 756.Va i_data . 757The 758.Xr wlan_acl 4 759module must be installed and enabled or 760.Er EINVAL 761will be returned. 762.It Dv IEEE80211_IOC_AMPDU 763Set whether or not AMPDU is enabled for transmit and/or receive 764using the value in 765.Va i_val . 766This request causes a running interface operating on an HT channel 767to be reset. 768See 769.Dv IEEE80211_IOC_AMPDU 770above for details. 771.It Dv IEEE80211_IOC_AMPDU_DENSITY 772Set the minimum density for bursting AMPDU frames to the value in 773.Va i_val . 774This request causes a running interface to be reset. 775See 776.Dv IEEE80211_IOC_AMPDU_DENSITY 777above for details. 778.It Dv IEEE80211_IOC_AMPDU_LIMIT 779Set the limit on the size of AMPDU frames to the value in 780.Va i_val . 781This request causes a running interface to be reset. 782See 783.Dv IEEE80211_IOC_AMPDU_LIMIT 784above for details. 785.It Dv IEEE80211_IOC_AMSDU 786Set whether or not AMSDU is enabled for transmit and/or receive 787using the value in 788.Va i_val . 789This request causes a running interface operating on an HT channel 790to be reset. 791See 792.Dv IEEE80211_IOC_AMSDU 793above for details. 794.It Dv IEEE80211_IOC_AMSDU_LIMIT 795Set the limit on the size of AMSDU frames to the value in 796.Va i_val . 797This request causes a running interface to be reset. 798See 799.Dv IEEE80211_IOC_AMSDU_LIMIT 800above for details. 801.It Dv IEEE80211_IOC_APBRIDGE 802Set whether AP bridging is enabled using the value in 803.Va i_val . 804See 805.Dv IEEE80211_IOC_APBRIDGE 806above for details. 807.It Dv IEEE80211_IOC_APPIE 808Set an application information element using the data pointed to by 809.Va i_data . 810This request causes a running interface to be restarted if the WPA 811information element is changed. 812See 813.Dv IEEE80211_IOC_APPIE 814above for details. 815.It Dv IEEE80211_IOC_AUTHMODE 816Set the current authentication mode using the value in 817.Va i_val . 818This request causes a running interface to be restarted. 819See 820.Dv IEEE80211_IOC_AUTHMODE 821above for details. 822This request causes a running interface to be restarted. 823.It Dv IEEE80211_IOC_BEACON_INTERVAL 824Set the time between Beacon frames (in TU) to the value in 825.Va i_val . 826This request causes a running interface to be restarted. 827.It Dv IEEE80211_IOC_BGSCAN 828Set whether background scanning is enabled using the value in 829.Va i_val . 830.It Dv IEEE80211_IOC_BGSCAN_IDLE 831Set the minimum time (in msecs) a station must be idle 832before it will do a background scan to the value in 833.Va i_val . 834.It Dv IEEE80211_IOC_BGSCAN_INTERVAL 835Set the minimum time (seconds) between background scan operations to the value in 836.Va i_val . 837.It Dv IEEE80211_IOC_BMISSTHRESHOLD 838Set the number of consecutive missed Beacon frames before the system will 839attempt to roam to the value in 840.Va i_val . 841This request causes a running interface to be reset. 842.It Dv IEEE80211_IOC_BSSID 843Set the 802.11 MAC address for the desired BSS identifier according to 844.Va i_data . 845This request causes a running interface to be restarted. 846.It Dv IEEE80211_IOC_BURST 847Set whether or not packet bursting is enabled using the value in 848.Va i_val . 849This request causes a running interface to be reset. 850.It Dv IEEE80211_IOC_CHANNEL 851Set the desired/current channel to the value given by 852.Va i_val . 853This request causes a running interface to 854immediately change to the specified channel if possible; 855otherwise the interface will be restarted. 856Note this request is deprecated; use 857.Dv IEEE80211_IOC_CURCHAN 858instead. 859.It Dv IEEE80211_IOC_CHANLIST 860Set the list of available channels using the channel list pointed to by 861.Va i_data . 862The channel list is a bit vector with bit N set to 1 if 863IEEE channel number N is available for use. 864The specified channel list is checked against the set of supported 865channels and any channels not supported are silently ignored. 866If the intersection of the channel list and the supported channels is empty 867.Er EINVAL 868is returned. 869Note the current channel may be marked invalid after installing a 870new channel list. 871This request causes a running interface to be restarted. 872.It Dv IEEE80211_IOC_COUNTERMEASURES 873Set whether TKIP Countermeasures are enabled using the value in 874.Va i_val . 875This request can only be used when the authentication mode is set 876WPA; otherwise 877.Er EOPNOTSUPP 878will be returned. 879.It Dv IEEE80211_IOC_CURCHAN 880Set the current channel using the information referenced by 881.Va i_data . 882This request causes a running interface to 883immediately change to the specified channel if possible; 884otherwise the interface will be restarted. 885.It Dv IEEE80211_IOC_DELKEY 886Delete the key specified by the information referenced by 887.Va i_data . 888.It Dv IEEE80211_IOC_DELMAC 889Remove an entry in the MAC address Access Control List (ACL) database using 890the value pointed to by 891.Va i_data . 892The 893.Xr wlan_acl 4 894module must be installed and enabled or 895.Er EINVAL 896will be returned. 897.It Dv IEEE80211_IOC_DFS 898Set whether or not Dynamic Frequency Selection (DFS) is enabled 899using the value in 900.Va i_val . 901This request will fail with 902.Er EINVAL 903if 802.11h support is not enabled. 904See 905.Dv IEEE80211_IOC_DFS 906above for details. 907.It Dv IEEE80211_IOC_DOTD 908Set whether or not 802.11d support is enabled using the value in 909.Va i_val . 910This request causes a running interface to be restarted. 911See 912.Dv IEEE80211_IOC_DOTD 913above for details. 914.It Dv IEEE80211_IOC_DOTH 915Return whether 802.11h support is enabled using the value in 916.Va i_val . 917See 918.Dv IEEE80211_IOC_DOTH 919above for details. 920.It Dv IEEE80211_IOC_DROPUNENCRYPTED 921Set whether unencrypted packets transmit/received should be discarded 922using the value in 923.Va i_val . 924.It Dv IEEE80211_IOC_DTIM_PERIOD 925Set the period (in beacon intervals) between DTIM events to the value in 926This request causes a running interface to be restarted. 927.Va i_val . 928.It Dv IEEE80211_IOC_DWDS 929Set whether or not Dynamic WDS support is enabled using the value in 930.Va i_val . 931See 932.Dv IEEE80211_IOC_DWDS 933above for details. 934.It Dv IEEE80211_IOC_FF 935Set whether Atheros fast-frames support is enabled using the value in 936.Va i_val . 937This request causes a running interface to be restarted. 938See 939.Dv IEEE80211_IOC_FF 940above for details. 941.It Dv IEEE80211_IOC_FRAGTHRESHOLD 942Set the threshold (in bytes) for enabling fragmentation frames using the value in 943.Va i_val . 944This request causes a running interface to be reset. 945See 946.Dv IEEE80211_IOC_FRAGTHRESHOLD 947above for details. 948.It Dv IEEE80211_IOC_GREENFIELD 949Set whether or not Greenfield preamble use is enabled using the value in 950.Va i_val . 951This request causes a running interface to be reset. 952See 953.Dv IEEE80211_IOC_GREENFIELD 954above for details. 955.It Dv IEEE80211_IOC_HIDESSID 956Set whether SSID hiding/cloaking is enabled using the value in 957.Va i_val . 958This request causes a running interface to be reset. 959See 960.Dv IEEE80211_IOC_HIDESSID 961above for details. 962.It Dv IEEE80211_IOC_HTCOMPAT 963Set whether or not 802.11n compatibility support is enabled using the value in 964.Va i_val . 965This request causes a running interface to be reset if operating on HT channel. 966See 967.Dv IEEE80211_IOC_HTCOMPAT 968above for details. 969.It Dv IEEE80211_IOC_HTCONF 970Set automatic promotion of HT channels using the value in 971.Va i_val . 972This request causes a running interface to be restarted. 973See 974.Dv IEEE80211_IOC_HTCONF 975above for details. 976.It Dv IEEE80211_IOC_HTPROTMODE 977Set the technique used to protect HT frames in a mixed 802.11n network 978using the value in 979.Va i_val . 980This request causes a running interface to be reset. 981See 982.Dv IEEE80211_IOC_HTPROTMODE 983above for details. 984.It Dv IEEE80211_IOC_HWMP_MAXHOPS 985Set the maximum acceptable hop count in an HWMP path according to 986.Va i_val . 987Values must be in the range [0-255]. 988.It Dv IEEE80211_IOC_HWMP_ROOTMODE 989Set the Mesh root mode operation according to 990.Va i_val . 991Valid values are 992.Dv IEEE80211_HWMP_ROOTMODE_DISABLED 993(root mode is disabled), 994.Dv IEEE80211_HWMP_ROOTMODE_NORMAL 995(send broadcast Path Request frames), 996.Dv IEEE80211_HWMP_ROOTMODE_PROACTIVE 997(send broadcast Path Request frames and force replies) 998and 999.Dv IEEE80211_HWMP_ROOTMODE_RANN 1000(send broadcast Root Announcement (RANN) frames). 1001.It Dv IEEE80211_IOC_INACTIVITY 1002Set whether or not the system handles inactivity processing using the value in 1003.Va i_val . 1004When inactivity processing is enabled the system will track stations 1005that have not transmitted frames and periodically probe them to 1006check if they are still present. 1007Stations that are inactive and do not respond to probes are dropped. 1008.It Dv IEEE80211_IOC_MACCMD 1009Change the state of the MAC address Access Control List (ACL) system. 1010There are several requests supported: 1011.Dv IEEE80211_MACCMD_POLICY_OPEN 1012(set the current policy to disable ACL use), 1013.Dv IEEE80211_MACCMD_POLICY_ALLOW 1014(set the current policy to allow only addresses listed in the database), 1015.Dv IEEE80211_MACCMD_POLICY_DENY 1016(set the current policy to deny addresses listed in the database), 1017.Dv IEEE80211_MACCMD_POLICY_RADUS 1018(set the current policy to enable use of a RADIUS backend), 1019.Dv IEEE80211_MACCMD_FLUSH 1020(flush all addresses from the database), 1021and 1022.Dv IEEE80211_MACCMD_DETACH 1023(detach the ACL subsystem, disabling it). 1024The 1025.Xr wlan_acl 4 1026module must be installed or 1027.Er EINVAL 1028will be returned. 1029.It Dv IEEE80211_IOC_MESH_AP 1030Set whether or not Mesh AP support is enabled using 1031.Va i_val . 1032.It Dv IEEE80211_IOC_MESH_FWRD 1033Set whether or not packet forwarding support is enabled using 1034.Va i_val . 1035.It Dv IEEE80211_IOC_MESH_ID 1036Set the Mesh ID using the value pointed to by 1037.Va i_data . 1038A Mesh ID can be up to 1039.Dv IEEE80211_MESHID_LEN 1040bytes long. 1041.It Dv IEEE80211_IOC_MESH_PP_METRIC 1042Set the link metric protocol using the value pointed to by 1043.Va i_data . 1044.It Dv IEEE80211_IOC_MESH_PP_PATH 1045Set the path selection protocol using the value pointed to by 1046.Va i_data . 1047.It Dv IEEE80211_IOC_MESH_RTCMD 1048Manipulate the state of the Mesh routing tables. 1049Several requests are supported: 1050.Dv IEEE80211_MESH_RTCMD_FLUSH 1051(flush the contents of the routing table), 1052.Dv IEEE80211_MESH_RTCMD_ADD 1053(add an entry for the MAC address specified in 1054.Va i_data 1055and start the Peer discovery process), 1056and 1057.Dv IEEE80211_MESH_RTCMD_DELETE 1058(delete the entry corresponding to the MAC address specified in 1059.Va i_data ). 1060.It Dv IEEE80211_IOC_MESH_TTL 1061Set the Mesh Time To Live (TTL) setting installed in packets 1062transmitted by this mesh node using 1063.Va i_val . 1064.It Dv IEEE80211_IOC_MLME 1065Explicitly control the MLME state machine for a station using the 1066MLME request pointed to by 1067.Va i_data . 1068There are several MLME operations supported: 1069.Dv IEEE80211_MLME_ASSOC 1070(request association to an access point), 1071.Dv IEEE80211_MLME_DIASSOC 1072(diassociate the specified station), 1073.Dv IEEE80211_MLME_DEAUTH 1074(deauthenticate the specified station), 1075.Dv IEEE80211_MLME_AUHORIZE 1076(mark the specified station authorized to pass data frames), 1077.Dv IEEE80211_MLME_UNAUTHORIZE 1078(revoke the specified station's ability to pass data frames), 1079and 1080.Dv IEEE80211_MLME_AUTH 1081(request authentication to an access point). 1082Note when this facility is used for stations operating in infrastructure mode 1083the roaming mode should be set to manual. 1084.It Dv IEEE80211_IOC_POWERSAVE 1085Set the current powersaving mode to the value in 1086.Va i_val . 1087See 1088.Dv IEEE80211_IOC_POWERSAVE 1089above for valid values. 1090This request causes a running interface to be reset. 1091.It Dv IEEE80211_IOC_POWERSAVESLEEP 1092Set the powersave sleep time in TU to the value in 1093.Va i_val . 1094This request causes a running interface to be reset. 1095.It Dv IEEE80211_IOC_PRIVACY 1096Set the current MLME setting for PRIVACY using the value in 1097.Va i_val . 1098See 1099.Dv IEEE80211_IOC_PRIVACY 1100above for details. 1101.It Dv IEEE80211_IOC_PROTMODE 1102Set the current 802.11g protection mode to the value in 1103.Va i_val . 1104This request causes a running interface to be reset. 1105See 1106.Dv IEEE80211_IOC_PROTMODE 1107above for details. 1108This request causes a running interface to be reset. 1109.It Dv IEEE80211_IOC_PUREG 1110Set whether ``pure 11g'' mode is enabled using the value in 1111.Va i_val . 1112This request causes a running interface to be restarted. 1113See 1114.Dv IEEE80211_IOC_PUREG 1115above for details. 1116.It Dv IEEE80211_IOC_PUREN 1117Set whether ``pure 11n'' mode is enabled using the value in 1118.Va i_val . 1119This request causes a running interface to be restarted. 1120See 1121.Dv IEEE80211_IOC_PUREN 1122above for details. 1123.It Dv IEEE80211_IOC_REGDOMAIN 1124Set the regulatory state using the data referenced by 1125.Va i_data . 1126This request can only be issued when all interfaces cloned from the 1127underlying physical device are marked down; otherwise 1128.Er EBUSY 1129is returned. 1130Note the new regulatory data may invalidate any desired channel. 1131.It Dv IEEE80211_IOC_RIFS 1132Set whether or not Reduced InterFrame Spacing (RIFS) is enabled 1133using the value in 1134.Va i_val . 1135This setting is meaningful only when operating with 802.11n on an HT channel. 1136This request causes a running interface to be reset. 1137.It Dv IEEE80211_IOC_ROAM 1138Set station roaming parameters using the data pointed to by 1139.Va i_data . 1140.It Dv IEEE80211_IOC_ROAMING 1141Set the current roaming mode to the value in 1142.Va i_val . 1143See 1144.Dv IEEE80211_IOC_ROAMING 1145above for details. 1146.It Dv IEEE80211_IOC_RTSTHRESHOLD 1147Set the threshold (in bytes) for enabling transmission of RTS frames 1148to the value in 1149.Va i_val . 1150This request causes a running interface to be reset. 1151See 1152.Dv IEEE80211_IOC_RTSTHRESHOLD 1153above for details. 1154.It Dv IEEE80211_IOC_SCANVALID 1155Set the age (in seconds) that results from a scan operation will be 1156considered valid. 1157When scan results are no longer valid and they are needed (e.g. to roam) the 1158system will initiate a scan operation to replenish the scan cache. 1159.It Dv IEEE80211_IOC_SCAN_REQ 1160Request a scan operation using the parameters pointed to by 1161.Va i_val . 1162The underlying device must be running or 1163.Er ENXIO 1164will be returned. 1165Values for 1166.Va sr_duration , 1167.Va sr_mindwell , 1168and 1169.Va sr_maxdwell 1170shorter than 1 clock tick are rounded up to a tick. 1171If more SSID's are supplied than the system is capable of handling 1172the extra ones are silently ignored. 1173If a scan operation is already in progress the request will be 1174(silently) ignored. 1175.It Dv IEEE80211_IOC_SCAN_CANCEL 1176Cancel any pending/active scan operation. 1177.It Dv IEEE80211_IOC_SHORTGI 1178Set whether or not Short Guard Interval (SGI) is enabled using the value in 1179.Va i_val . 1180Note SGI is only used when operating on an HT (802.11n) channel. 1181This request causes a running interface to be reset. 1182.It Dv IEEE80211_IOC_SMPS 1183Set the Spatial Multiplexing Power Save (SMPS) setting to the value in 1184.Va i_val . 1185This request causes a running interface to be reset. 1186See 1187.Dv IEEE80211_IOC_SMPS 1188above for details. 1189.It Dv IEEE80211_IOC_SSID 1190Set the desired SSID using the value pointed to by 1191.Va i_data . 1192The string may be at most IEEE80211_NWID_LEN bytes. 1193This request causes a running interface to be restarted. 1194.It Dv IEEE80211_IOC_STA_STATS 1195Clear accumulated statistics for the specified station. 1196.It Dv IEEE80211_IOC_STA_VLAN 1197Set the VLAN tag for the specified station using the information pointed to by 1198.Va i_data . 1199.It Dv IEEE80211_IOC_TDMA_BINTERVAL 1200Set the interval between Beacon frames to the value in 1201.Va i_val . 1202Values must be positive. 1203This request causes a running interface to be reset. 1204.It Dv IEEE80211_IOC_TDMA_SLOT 1205Set the current TDMA slot to the value in 1206.Va i_val . 1207Values must be in the range [0-slotcnt]. 1208Slot 0 identifies the master in the TDMA network; if it running it will 1209immediately start sending Beacon frames. 1210.It Dv IEEE80211_IOC_TDMA_SLOTCNT 1211Set the number of slots in the TDMA network to the value in 1212.Va i_val . 1213This request causes a running interface to be reset. 1214.It Dv IEEE80211_IOC_TDMA_SLOTLEN 1215Set the length of the TDMA slot assigned to each station in the network 1216to the value in 1217.Va i_val . 1218Slot lengths must be in the range 200 usecs to 1024 milliseconds 1219(though values outside the range 1-200ms are unlikely to work well). 1220This request causes a running interface to be reset. 1221.It Dv IEEE80211_IOC_TSN 1222Set whether or not Transitional Security Network (TSN) is enabled 1223using the value in 1224.Va i_val . 1225.It Dv IEEE80211_IOC_TURBOP 1226Set whether Atheros Dynamic Turbo mode is enabled using the value in 1227.Va i_val . 1228This request causes a running interface to be restarted. 1229.It Dv IEEE80211_IOC_TXPARAMS 1230Set transmit parameters using the data pointed to be 1231.Va i_data . 1232This request causes a running interface to be restarted. 1233.It Dv IEEE80211_IOC_TXPOWER 1234Set the maximum transmit power limit in .5 dBm units to the value in 1235.Va i_val . 1236This request causes a running interface to be reset. 1237.It Dv IEEE80211_IOC_WEP 1238Set the current WEP mode to the value in 1239.Va i_val . 1240See 1241.Dv IEEE80211_IOC_WEP 1242above for valid values. 1243This request causes a running interface to be restarted. 1244Note this request is deprecated; use 1245.Dv IEEE80211_IOC_PRIVACY 1246and 1247.Dv IEEE80211_IOC_DROPUNENCRYPTED 1248instead. 1249.It Dv IEEE80211_IOC_WEPKEY 1250Set the WEP key indicated by 1251.Va i_val 1252using the data pointed to by 1253.Va i_data . 1254Note this request is deprecated; use 1255.Dv IEEE80211_IOC_WPAKEY 1256instead. 1257.It Dv IEEE80211_IOC_WEPTXKEY 1258Set the default transmit key used for transmission to the value in 1259.Va i_val . 1260.It Dv IEEE80211_IOC_WME 1261Set whether or not WME/WMM support is enabled using the value in 1262.Va i_val . 1263This request causes a running interface to be reset. 1264.It Dv IEEE80211_IOC_WME_ACKPOLICY 1265Set the WME ACK Policy for the Access Class (AC) specified in 1266.Va i_len 1267using the value in 1268.Va i_val . 1269.It Dv IEEE80211_IOC_WME_ACM 1270Set the WME Admission Control Mechanism for the Access Class (AC) specified in 1271.Va i_len 1272using the value in 1273.Va i_val . 1274.It Dv IEEE80211_IOC_WME_AIFS 1275Set the WME AIFS parameter for the Access Class (AC) specified in 1276.Va i_len 1277using the value in 1278.Va i_val . 1279.It Dv IEEE80211_IOC_WME_CWMAX 1280Set the WME CWmax parameter for the Access Class (AC) specified in 1281.Va i_len 1282using the value in 1283.Va i_val . 1284.It Dv IEEE80211_IOC_WME_CWMIN 1285Set the WME CWmin parameter for the Access Class (AC) specified in 1286.Va i_len 1287using the value in 1288.Va i_val . 1289.It Dv IEEE80211_IOC_WME_TXOPLIMIT 1290Set the WME TxOpLimit parameter for the Access Class (AC) specified in 1291.Va i_len 1292using the value in 1293.Va i_val . 1294.It Dv IEEE80211_IOC_WPA 1295Set the WPA configuration using the value in 1296.Va i_val . 1297This request causes a running interface to be reset. 1298See 1299.Dv IEEE80211_IOC_WPA 1300above for details. 1301.It Dv IEEE80211_IOC_WPAKEY 1302Set the requested cryptographic key using data in the buffer pointed to by 1303.Va i_data . 1304See 1305.Dv IEEE80211_IOC_WPAKEY 1306for details. 1307.It Dv IEEE80211_IOC_WPS 1308Set whether or not Wi-FI Protected Setup (WPS) is enabled using the value in 1309.Va i_val . 1310.El 1311.Sh SEE ALSO 1312.Xr ioctl 2 , 1313.Xr wlan 4 , 1314.Xr wlan_acl 4 , 1315.Xr wlan_xauth 4 , 1316.Xr ifconfig 8 , 1317.Xr hostapd 8 , 1318.Xr wpa_supplicant 8 . 1319