1.\" 2.\" Copyright (c) 2020 Henri Hennebert <hlh@restart.be> 3.\" All rights reserved. 4.\" 5.\" Redistribution and use in source and binary forms, with or without 6.\" modification, are permitted provided that the following conditions 7.\" are met: 8.\" 1. Redistributions of source code must retain the above copyright 9.\" notice, this list of conditions and the following disclaimer. 10.\" 2. The name of the author may not be used to endorse or promote products 11.\" derived from this software without specific prior written permission. 12.\" 13.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 14.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 15.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 16.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 17.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 18.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 19.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 20.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 21.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 22.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 23.\" SUCH DAMAGE. 24.\" 25.\" $FreeBSD$ 26.\" 27.Dd February 10, 2022 28.Dt RTSX 4 29.Os 30.Sh NAME 31.Nm rtsx 32.Nd Realtek SD card reader 33.Sh SYNOPSIS 34To compile this driver into the kernel, place the following 35lines in the kernel configuration file: 36.Bd -ragged -offset indent 37.Cd "device mmc" 38.Cd "device mmcsd" 39.Cd "device rtsx" 40.Ed 41.Pp 42Alternatively, to load the driver as a module at boot time, 43place the following lines in 44.Xr loader.conf 5 : 45.Bd -literal -offset indent 46mmc_load="YES" 47mmcsd_load="YES" 48rtsx_load="YES" 49.Ed 50.Sh DESCRIPTION 51The 52.Nm 53driver provides support for Realtek SD card reader. 54Driver attaches mmc bus on card insertion and detaches it on card removing. 55.Sh HARDWARE 56The 57.Nm 58driver supports different specification compatible chips. 59The following chips have been verified to work: 60.Pp 61.Bl -bullet -compact 62.It 63RTS5209 64.It 65RTS5227 66.It 67RTS5229 68.It 69RTS522A 70.It 71RTS525A 72.It 73RTS5260 74.It 75RTL8411B 76.El 77.Pp 78It should also work for: 79.Pp 80.Bl -bullet -compact 81.It 82RTS5249 83.It 84RTL8402 85.It 86RTL8411 87.El 88.Sh SEE ALSO 89.Xr mmc 4 , 90.Xr mmcsd 4 91.Rs 92.%T "SD Specifications, Part 2, SD Host Controller, Simplified Specification" 93.%T "SanDisk Secure Digital Card" 94.Re 95.Sh HISTORY 96The 97.Nm 98driver was ported from 99.Ox 100with modifications found in Linux and 101.Nx . 102.Sh AUTHORS 103.An Henri Hennebert Aq Mt hlh@restart.be 104.An Gary Jennejohn Aq Mt gj@freebsd.org 105.An Jesper Schmitz Mouridsen Aq Mt jsm@FreeBSD.org 106.Sh CONTRIBUTORS 107.An Lutz Bichler Aq Mt Lutz.Bichler@gmail.com 108.Sh DEBUGGING INFORMATION 109.Em dev.rtsx.0.debug_mask 110can be set with the following masks: 111.Bl -bullet 112.It 1130x01 - to show the basic flow of the driver, 114.It 1150x02 - to trace the SD commands, 116.It 1170x04 - to trace the tuning phase. 118.El 119.Sh BUGS 120.Bl -bullet 121.It 122RTS522A on Lenovo T470p, card detection and read-only switch are reversed. 123This is solved by adding in 124.Em loader.conf(5) : 125.Bd -ragged 126.Cd dev.rtsx.0.inversion=1 127.Ed 128.Pp 129The driver tries to automate those exceptions. 130If this automation is wrong, it can be avoided by adding in 131.Em loader.conf(5) : 132.Bd -ragged 133.Cd dev.rtsx.0.inversion=0 134.Ed 135.It 136Mounting a filesystem with write access on a card write protected may involve a kernel crash. 137.It 138Suspend/Resume do not work under MMCCAM. 139.El 140