xref: /freebsd/share/man/man9/bus_alloc_resource.9 (revision 4b9d6057)
1.\" -*- nroff -*-
2.\"
3.\" Copyright (c) 2000 Alexander Langer
4.\"
5.\" All rights reserved.
6.\"
7.\" This program is free software.
8.\"
9.\" Redistribution and use in source and binary forms, with or without
10.\" modification, are permitted provided that the following conditions
11.\" are met:
12.\" 1. Redistributions of source code must retain the above copyright
13.\"    notice, this list of conditions and the following disclaimer.
14.\" 2. Redistributions in binary form must reproduce the above copyright
15.\"    notice, this list of conditions and the following disclaimer in the
16.\"    documentation and/or other materials provided with the distribution.
17.\"
18.\" THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY EXPRESS OR
19.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
20.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
21.\" IN NO EVENT SHALL THE DEVELOPERS BE LIABLE FOR ANY DIRECT, INDIRECT,
22.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
23.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
27.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28.\"
29.Dd May 20, 2016
30.Dt BUS_ALLOC_RESOURCE 9
31.Os
32.Sh NAME
33.Nm bus_alloc_resource ,
34.Nm bus_alloc_resource_any ,
35.Nm bus_alloc_resource_anywhere
36.Nd allocate resources from a parent bus
37.Sh SYNOPSIS
38.In sys/param.h
39.In sys/bus.h
40.Pp
41.In machine/bus.h
42.In sys/rman.h
43.In machine/resource.h
44.Ft struct resource *
45.Fo bus_alloc_resource
46.Fa "device_t dev" "int type" "int *rid" "rman_res_t start" "rman_res_t end"
47.Fa "rman_res_t count" "u_int flags"
48.Fc
49.Ft struct resource *
50.Fn bus_alloc_resource_any "device_t dev" "int type" "int *rid" "u_int flags"
51.Ft struct resource *
52.Fo bus_alloc_resource_anywhere
53.Fa "device_t dev" "int type" "int *rid" "rman_res_t count" "u_int flags"
54.Fc
55.Sh DESCRIPTION
56This is an easy interface to the resource-management functions.
57It hides the indirection through the parent's method table.
58This function generally should be called in attach, but (except in some
59rare cases) never earlier.
60.Pp
61The
62.Fn bus_alloc_resource_any
63and
64.Fn bus_alloc_resource_anywhere
65functions are convenience wrappers for
66.Fn bus_alloc_resource .
67.Fn bus_alloc_resource_any
68sets
69.Fa start ,
70.Fa end ,
71and
72.Fa count
73to the default resource (see description of
74.Fa start
75below).
76.Fn bus_alloc_resource_anywhere
77sets
78.Fa start
79and
80.Fa end
81to the default resource and uses the provided
82.Fa count
83argument.
84.Pp
85The arguments are as follows:
86.Bl -item
87.It
88.Fa dev
89is the device that requests ownership of the resource.
90Before allocation, the resource is owned by the parent bus.
91.It
92.Fa type
93is the type of resource you want to allocate.
94It is one of:
95.Bl -tag -width SYS_RES_MEMORY
96.It Dv PCI_RES_BUS
97for PCI bus numbers
98.It Dv SYS_RES_IRQ
99for IRQs
100.It Dv SYS_RES_DRQ
101for ISA DMA lines
102.It Dv SYS_RES_IOPORT
103for I/O ports
104.It Dv SYS_RES_MEMORY
105for I/O memory
106.El
107.It
108.Fa rid
109points to a bus specific handle that identifies the resource being allocated.
110For ISA this is an index into an array of resources that have been setup
111for this device by either the PnP mechanism, or via the hints mechanism.
112For PCCARD, this is an index into the array of resources described by the PC Card's
113CIS entry.
114For PCI, the offset into PCI config space which has the BAR to use to access
115the resource.
116The bus methods are free to change the RIDs that they are given as a parameter.
117You must not depend on the value you gave it earlier.
118.It
119.Fa start
120and
121.Fa end
122are the start/end addresses of the resource.
123If you specify values of 0ul for
124.Fa start
125and ~0ul for
126.Fa end
127and 1 for
128.Fa count ,
129the default values for the bus are calculated.
130.It
131.Fa count
132is the size of the resource.
133For example, the size of an I/O port is usually 1 byte (but some devices
134override this).
135If you specified the default values for
136.Fa start
137and
138.Fa end ,
139then the default value of the bus is used if
140.Fa count
141is smaller than the default value and
142.Fa count
143is used, if it is bigger than the default value.
144.It
145.Fa flags
146sets the flags for the resource.
147You can set one or more of these flags:
148.Bl -tag -width RF_SHAREABLE
149.It Dv RF_ALLOCATED
150resource has been reserved.
151The resource still needs to be activated with
152.Xr bus_activate_resource 9 .
153.It Dv RF_ACTIVE
154activate resource atomically.
155.It Dv RF_PREFETCHABLE
156resource is prefetchable.
157.It Dv RF_SHAREABLE
158resource permits contemporaneous sharing.
159It should always be set unless you know that the resource cannot be shared.
160It is the bus driver's task to filter out the flag if the bus does not
161support sharing.
162For example,
163.Xr pccard 4
164cannot share IRQs while
165.Xr cardbus 4
166can.
167.It Dv RF_UNMAPPED
168do not establish implicit mapping when activated via
169.Xr bus_activate_resource 9 .
170.El
171.El
172.Sh RETURN VALUES
173A pointer to
174.Va struct resource
175is returned on success, a null pointer otherwise.
176.Sh EXAMPLES
177This is some example code that allocates a 32 byte I/O port range and an IRQ.
178The values of
179.Va portid
180and
181.Va irqid
182should be saved in the softc of the device after these calls.
183.Bd -literal
184	struct resource *portres, *irqres;
185	int portid, irqid;
186
187	portid = 0;
188	irqid = 0;
189	portres = bus_alloc_resource(dev, SYS_RES_IOPORT, &portid,
190			0ul, ~0ul, 32, RF_ACTIVE);
191	irqres = bus_alloc_resource_any(dev, SYS_RES_IRQ, &irqid,
192			RF_ACTIVE | RF_SHAREABLE);
193.Ed
194.Sh SEE ALSO
195.Xr bus_activate_resource 9 ,
196.Xr bus_adjust_resource 9 ,
197.Xr bus_map_resource 9 ,
198.Xr bus_release_resource 9 ,
199.Xr device 9 ,
200.Xr driver 9
201.Sh AUTHORS
202.An -nosplit
203This manual page was written by
204.An Alexander Langer Aq Mt alex@big.endian.de
205with parts by
206.An Warner Losh Aq Mt imp@FreeBSD.org .
207