xref: /freebsd/share/mk/src.opts.mk (revision 1edb7116) 
1#
2# Option file for FreeBSD /usr/src builds, at least the userland and boot loader
3# portions of the tree. These options generally chose what parts of the tree to
4# include or omit and are FreeBSD source tree specific.
5#
6# Users define WITH_FOO and WITHOUT_FOO on the command line or in /etc/src.conf
7# and /etc/make.conf files. These translate in the build system to MK_FOO={yes,no}
8# with sensible (usually) defaults.
9#
10# Makefiles must include bsd.opts.mk after defining specific MK_FOO options that
11# are applicable for that Makefile (typically there are none, but sometimes there
12# are exceptions). Recursive makes usually add MK_FOO=no for options that they wish
13# to omit from that make.
14#
15# Makefiles must include bsd.mkopt.mk before they test the value of any MK_FOO
16# variable.
17#
18# Makefiles may also assume that this file is included by src.opts.mk should it
19# need variables defined there prior to the end of the Makefile where
20# bsd.{subdir,lib.bin}.mk is traditionally included.
21#
22# The old-style YES_FOO and NO_FOO are being phased out. No new instances of them
23# should be added. Old instances should be removed since they were just to
24# bridge the gap between FreeBSD 4 and FreeBSD 5.
25#
26# Makefiles should never test WITH_FOO or WITHOUT_FOO directly (although an
27# exception is made for _WITHOUT_SRCONF which turns off this mechanism
28# completely inside bsd.*.mk files).
29#
30
31.if !target(__<src.opts.mk>__)
32__<src.opts.mk>__:
33
34.include <bsd.own.mk>
35
36#
37# Define MK_* variables (which are either "yes" or "no") for users
38# to set via WITH_*/WITHOUT_* in /etc/src.conf and override in the
39# make(1) environment.
40# These should be tested with `== "no"' or `!= "no"' in makefiles.
41# The NO_* variables should only be set by makefiles for variables
42# that haven't been converted over.
43#
44
45# These options are used by the src builds. Those listed in
46# __DEFAULT_YES_OPTIONS default to 'yes' and will build unless turned
47# off.  __DEFAULT_NO_OPTIONS will default to 'no' and won't build
48# unless turned on. Any options listed in 'BROKEN_OPTIONS' will be
49# hard-wired to 'no'.  "Broken" here means not working or
50# not-appropriate and/or not supported. It doesn't imply something is
51# wrong with the code. There's not a single good word for this, so
52# BROKEN was selected as the least imperfect one considered at the
53# time. Options are added to BROKEN_OPTIONS list on a per-arch basis.
54# At this time, there's no provision for mutually incompatible options.
55# Options listed in 'REQUIRED_OPTIONS' will be hard-wired to 'yes'; this
56# is intended as a transitional measure while options are in the process
57# of being removed.
58
59__DEFAULT_YES_OPTIONS = \
60    ACCT \
61    ACPI \
62    APM \
63    AT \
64    AUDIT \
65    AUTHPF \
66    AUTOFS \
67    BHYVE \
68    BLACKLIST \
69    BLUETOOTH \
70    BOOT \
71    BOOTPARAMD \
72    BOOTPD \
73    BSD_CPIO \
74    BSDINSTALL \
75    BSNMP \
76    BZIP2 \
77    CALENDAR \
78    CAROOT \
79    CCD \
80    CDDL \
81    CLANG \
82    CLANG_BOOTSTRAP \
83    CLEAN \
84    CPP \
85    CROSS_COMPILER \
86    CRYPT \
87    CUSE \
88    CXGBETOOL \
89    DICT \
90    DMAGENT \
91    DTRACE \
92    DYNAMICROOT \
93    EE \
94    EFI \
95    ELFTOOLCHAIN_BOOTSTRAP \
96    EXAMPLES \
97    FILE \
98    FINGER \
99    FLOPPY \
100    FORTH \
101    FP_LIBC \
102    FREEBSD_UPDATE \
103    FTP \
104    GAMES \
105    GH_BC \
106    GNU_DIFF \
107    GOOGLETEST \
108    GPIO \
109    HAST \
110    HTML \
111    HYPERV \
112    ICONV \
113    INET \
114    INET6 \
115    INETD \
116    IPFILTER \
117    IPFW \
118    ISCSI \
119    JAIL \
120    KDUMP \
121    KVM \
122    LDNS \
123    LDNS_UTILS \
124    LEGACY_CONSOLE \
125    LLD \
126    LLD_BOOTSTRAP \
127    LLVM_ASSERTIONS \
128    LLVM_COV \
129    LLVM_CXXFILT \
130    LOADER_GELI \
131    LOADER_KBOOT \
132    LOADER_LUA \
133    LOADER_OFW \
134    LOADER_UBOOT \
135    LOCALES \
136    LOCATE \
137    LPR \
138    LS_COLORS \
139    MACHDEP_OPTIMIZATIONS \
140    MAIL \
141    MAILWRAPPER \
142    MAKE \
143    MLX5TOOL \
144    NETCAT \
145    NETGRAPH \
146    NETLINK \
147    NETLINK_SUPPORT \
148    NLS_CATALOGS \
149    NS_CACHING \
150    NTP \
151    NVME \
152    OFED \
153    OPENSSL \
154    PAM \
155    PF \
156    PKGBOOTSTRAP \
157    PMC \
158    PPP \
159    PTHREADS_ASSERTIONS \
160    QUOTAS \
161    RADIUS_SUPPORT \
162    RBOOTD \
163    RESCUE \
164    ROUTED \
165    SENDMAIL \
166    SERVICESDB \
167    SETUID_LOGIN \
168    SHAREDOCS \
169    SOURCELESS \
170    SOURCELESS_HOST \
171    SOURCELESS_UCODE \
172    STATS \
173    SYSCONS \
174    SYSTEM_COMPILER \
175    SYSTEM_LINKER \
176    TALK \
177    TCP_WRAPPERS \
178    TCSH \
179    TELNET \
180    TEXTPROC \
181    TFTP \
182    UNBOUND \
183    USB \
184    UTMPX \
185    VI \
186    VT \
187    WIRELESS \
188    WPA_SUPPLICANT_EAPOL \
189    ZFS \
190    LOADER_ZFS \
191    ZONEINFO
192
193__DEFAULT_NO_OPTIONS = \
194    BEARSSL \
195    BHYVE_SNAPSHOT \
196    CLANG_EXTRAS \
197    CLANG_FORMAT \
198    DIALOG \
199    DETECT_TZ_CHANGES \
200    DISK_IMAGE_TOOLS_BOOTSTRAP \
201    DTRACE_ASAN \
202    DTRACE_TESTS \
203    EXPERIMENTAL \
204    HESIOD \
205    LOADER_BIOS_TEXTONLY \
206    LOADER_VERBOSE \
207    LOADER_VERIEXEC_PASS_MANIFEST \
208    LLVM_BINUTILS \
209    LLVM_FULL_DEBUGINFO \
210    MALLOC_PRODUCTION \
211    OFED_EXTRA \
212    OPENLDAP \
213    REPRODUCIBLE_BUILD \
214    RPCBIND_WARMSTART_SUPPORT \
215    SORT_THREADS \
216    ZONEINFO_LEAPSECONDS_SUPPORT \
217
218__REQUIRED_OPTIONS = \
219    CAPSICUM \
220    CASPER
221
222# LEFT/RIGHT. Left options which default to "yes" unless their corresponding
223# RIGHT option is disabled.
224__DEFAULT_DEPENDENT_OPTIONS= \
225	CLANG_FULL/CLANG \
226	LLVM_TARGET_ALL/CLANG \
227	LOADER_VERIEXEC/BEARSSL \
228	LOADER_EFI_SECUREBOOT/LOADER_VERIEXEC \
229	LOADER_VERIEXEC_VECTX/LOADER_VERIEXEC \
230	VERIEXEC/BEARSSL \
231
232__SINGLE_OPTIONS = \
233	LIBC_MALLOC
234
235__LIBC_MALLOC_OPTIONS=	jemalloc
236__LIBC_MALLOC_DEFAULT=	jemalloc
237
238# MK_*_SUPPORT options which default to "yes" unless their corresponding
239# MK_* variable is set to "no".
240#
241.for var in \
242    BLACKLIST \
243    BZIP2 \
244    INET \
245    INET6 \
246    KERBEROS \
247    KVM \
248    NETGRAPH \
249    PAM \
250    TESTS \
251    WIRELESS
252__DEFAULT_DEPENDENT_OPTIONS+= ${var}_SUPPORT/${var}
253.endfor
254
255#
256# Default behaviour of some options depends on the architecture.  Unfortunately
257# this means that we have to test TARGET_ARCH (the buildworld case) as well
258# as MACHINE_ARCH (the non-buildworld case).  Normally TARGET_ARCH is not
259# used at all in bsd.*.mk, but we have to make an exception here if we want
260# to allow defaults for some things like clang to vary by target architecture.
261# Additional, per-target behavior should be rarely added only after much
262# gnashing of teeth and grinding of gears.
263#
264.if defined(TARGET_ARCH)
265__T=${TARGET_ARCH}
266.else
267__T=${MACHINE_ARCH}
268.endif
269
270# All supported backends for LLVM_TARGET_XXX
271__LLVM_TARGETS= \
272		aarch64 \
273		arm \
274		powerpc \
275		riscv \
276		x86
277__LLVM_TARGET_FILT=	C/(amd64|i386)/x86/:C/powerpc.*/powerpc/:C/armv[67]/arm/:C/riscv.*/riscv/
278.for __llt in ${__LLVM_TARGETS}
279# Default enable the given TARGET's LLVM_TARGET support
280.if ${__T:${__LLVM_TARGET_FILT}} == ${__llt}
281__DEFAULT_YES_OPTIONS+=	LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu}
282# aarch64 needs arm for -m32 support.
283.elif ${__T} == "aarch64" && ${__llt:Marm*} != ""
284__DEFAULT_DEPENDENT_OPTIONS+=	LLVM_TARGET_ARM/LLVM_TARGET_AARCH64
285# Default the rest of the LLVM_TARGETs to the value of MK_LLVM_TARGET_ALL.
286.else
287__DEFAULT_DEPENDENT_OPTIONS+=	LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu}/LLVM_TARGET_ALL
288.endif
289.endfor
290
291__DEFAULT_NO_OPTIONS+=LLVM_TARGET_BPF LLVM_TARGET_MIPS
292
293.include <bsd.compiler.mk>
294
295.if ${__T} == "i386" || ${__T} == "amd64"
296__DEFAULT_NO_OPTIONS += FDT
297.else
298__DEFAULT_YES_OPTIONS += FDT
299.endif
300
301.if ${__T:Marm*} == "" && ${__T:Mriscv64*} == ""
302__DEFAULT_YES_OPTIONS+=LLDB
303.else
304__DEFAULT_NO_OPTIONS+=LLDB
305.endif
306# LIB32 is not supported on all 64-bit architectures.
307.if (${__T} == "amd64" || ${__T:Maarch64*} != "" || ${__T} == "powerpc64")
308__DEFAULT_YES_OPTIONS+=LIB32
309.else
310BROKEN_OPTIONS+=LIB32
311.endif
312# EFI doesn't exist on powerpc (well, officially) and doesn't work on i386
313.if ${__T:Mpowerpc*} || ${__T} == "i386"
314BROKEN_OPTIONS+=EFI
315.endif
316# OFW is only for powerpc, exclude others
317.if ${__T:Mpowerpc*} == ""
318BROKEN_OPTIONS+=LOADER_OFW
319.endif
320# KBOOT is only for powerpc64 (powerpc64le broken) amd64 and aarch64
321.if ${__T} != "powerpc64" && ${__T} != "amd64" && ${__T} != "aarch64"
322BROKEN_OPTIONS+=LOADER_KBOOT
323.endif
324# UBOOT is only for arm, and big-endian powerpc
325.if (${__T:Marm*} == "" && ${__T:Mpowerpc*} == "") || ${__T} == "powerpc64le"
326BROKEN_OPTIONS+=LOADER_UBOOT
327.endif
328# GELI and Lua in loader currently cause boot failures on powerpc.
329# Further debugging is required -- probably they are just broken on big
330# endian systems generically (they jump to null pointers or try to read
331# crazy high addresses, which is typical of endianness problems).
332.if ${__T:Mpowerpc*}
333BROKEN_OPTIONS+=LOADER_GELI LOADER_LUA
334.endif
335
336# Kernel TLS is enabled by default on amd64, aarch64 and powerpc64*
337.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T:Mpowerpc64*} != ""
338__DEFAULT_YES_OPTIONS+=OPENSSL_KTLS
339.else
340__DEFAULT_NO_OPTIONS+=OPENSSL_KTLS
341.endif
342
343.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \
344    ${__T:Mpowerpc64*} == ""
345BROKEN_OPTIONS+=CXGBETOOL
346BROKEN_OPTIONS+=MLX5TOOL
347.endif
348
349.if ${__T} != "amd64" && ${__T} != "i386" && ${__T} != "aarch64"
350BROKEN_OPTIONS+=HYPERV
351.endif
352
353# NVME is only aarch64, x86 and powerpc64*
354.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \
355    ${__T:Mpowerpc64*} == ""
356BROKEN_OPTIONS+=NVME
357.endif
358
359.if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386" || \
360    ${__T:Mpowerpc64*} != "" || ${__T:Mriscv64*} != ""
361__DEFAULT_YES_OPTIONS+=OPENMP
362.else
363__DEFAULT_NO_OPTIONS+=OPENMP
364.endif
365
366# Broken on 32-bit arm, kernel module compile errors
367.if ${__T:Marm*} != ""
368BROKEN_OPTIONS+= OFED
369.endif
370
371# MK_host_egacy is set by local.sys.mk so is valid here
372.if ${MACHINE:Nhost*} == "" && ${MK_host_egacy} == "yes"
373# we cannot expect tests to work
374BROKEN_OPTIONS+= TESTS
375.endif
376
377.-include <site.src.opts.mk>
378
379.include <bsd.mkopt.mk>
380
381#
382# Force some options off if their dependencies are off.
383# Order is somewhat important.
384#
385.if ${MK_CAPSICUM} == "no"
386MK_CASPER:=	no
387.endif
388
389.if ${MK_SOURCELESS} == "no"
390MK_SOURCELESS_HOST:=	no
391MK_SOURCELESS_UCODE:= no
392.endif
393
394.if ${MK_CDDL} == "no"
395MK_CTF:=	no
396MK_DTRACE:=	no
397MK_LOADER_ZFS:=	no
398MK_ZFS:=	no
399.endif
400
401.if ${MK_CRYPT} == "no"
402MK_OPENSSL:=	no
403MK_OPENSSH:=	no
404MK_KERBEROS:=	no
405MK_KERBEROS_SUPPORT:=	no
406.endif
407
408.if ${MK_DTRACE} == "no"
409MK_CTF:=	no
410.endif
411
412.if ${MK_MAIL} == "no"
413MK_MAILWRAPPER:= no
414MK_SENDMAIL:=	no
415MK_DMAGENT:=	no
416.endif
417
418.if ${MK_NETGRAPH} == "no"
419MK_BLUETOOTH:=	no
420.endif
421
422.if ${MK_NLS} == "no"
423MK_NLS_CATALOGS:= no
424.endif
425
426.if ${MK_OPENSSL} == "no"
427MK_DMAGENT:=	no
428MK_OPENSSH:=	no
429MK_OPENSSL_KTLS:=	no
430MK_KERBEROS:=	no
431MK_KERBEROS_SUPPORT:=	no
432MK_LDNS:=	no
433MK_PKGBOOTSTRAP:=	no
434MK_LOADER_ZFS:=	no
435MK_ZFS:=	no
436.endif
437
438.if ${MK_LDNS} == "no"
439MK_LDNS_UTILS:=	no
440MK_UNBOUND:= no
441.endif
442
443.if ${MK_PF} == "no"
444MK_AUTHPF:=	no
445.endif
446
447.if ${MK_OFED} == "no"
448MK_OFED_EXTRA:=	no
449.endif
450
451.if ${MK_TESTS} == "no"
452MK_DTRACE_TESTS:= no
453.endif
454
455.if ${MK_TESTS_SUPPORT} == "no"
456MK_GOOGLETEST:=	no
457.endif
458
459.if ${MK_ZONEINFO} == "no"
460MK_ZONEINFO_LEAPSECONDS_SUPPORT:= no
461.endif
462
463.if ${MK_CROSS_COMPILER} == "no"
464MK_CLANG_BOOTSTRAP:= no
465MK_ELFTOOLCHAIN_BOOTSTRAP:= no
466MK_LLD_BOOTSTRAP:= no
467.endif
468
469.if ${MK_TOOLCHAIN} == "no"
470MK_CLANG:=	no
471MK_LLD:=	no
472MK_LLDB:=	no
473MK_LLVM_BINUTILS:=	no
474.endif
475
476.if ${MK_CLANG} == "no"
477MK_CLANG_EXTRAS:= no
478MK_CLANG_FORMAT:= no
479MK_CLANG_FULL:= no
480MK_LLVM_COV:= no
481.endif
482
483.if ${MK_ASAN} == "yes"
484# In order to get sensible backtraces from ASAN we have to install
485# llvm-symbolizer as /usr/bin/addr2line instead of the elftoolchain version.
486MK_LLVM_BINUTILS:=	yes
487.endif
488
489.if ${MK_LLVM_BINUTILS} == "yes"
490# MK_LLVM_CXXFILT is a subset of MK_LLVM_BINUTILS and should therefore be
491# enabled if MK_LLVM_BINUTILS is set.
492MK_LLVM_CXXFILT:=	yes
493.endif
494
495.if ${MK_LOADER_VERIEXEC} == "no"
496MK_LOADER_VERIEXEC_PASS_MANIFEST := no
497.endif
498
499#
500# MK_* options whose default value depends on another option.
501#
502.for vv in \
503    GSSAPI/KERBEROS \
504    MAN_UTILS/MAN
505.if defined(WITH_${vv:H})
506MK_${vv:H}:=	yes
507.elif defined(WITHOUT_${vv:H})
508MK_${vv:H}:=	no
509.else
510MK_${vv:H}:=	${MK_${vv:T}}
511.endif
512.endfor
513
514#
515# Set defaults for the MK_*_SUPPORT variables.
516#
517
518.endif #  !target(__<src.opts.mk>__)
519