xref: /freebsd/stand/efi/boot1/boot1.c (revision a3557ef0)
1 /*-
2  * Copyright (c) 1998 Robert Nordier
3  * All rights reserved.
4  * Copyright (c) 2001 Robert Drehmel
5  * All rights reserved.
6  * Copyright (c) 2014 Nathan Whitehorn
7  * All rights reserved.
8  * Copyright (c) 2015 Eric McCorkle
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms are freely
12  * permitted provided that the above copyright notice and this
13  * paragraph and the following disclaimer are duplicated in all
14  * such forms.
15  *
16  * This software is provided "AS IS" and without any express or
17  * implied warranties, including, without limitation, the implied
18  * warranties of merchantability and fitness for a particular
19  * purpose.
20  */
21 
22 #include <sys/cdefs.h>
23 __FBSDID("$FreeBSD$");
24 
25 #include <sys/param.h>
26 #include <machine/elf.h>
27 #include <machine/stdarg.h>
28 #include <stand.h>
29 
30 #include <efi.h>
31 #include <eficonsctl.h>
32 #include <efichar.h>
33 
34 #include "boot_module.h"
35 #include "paths.h"
36 #include "proto.h"
37 
38 static void efi_panic(EFI_STATUS s, const char *fmt, ...) __dead2 __printflike(2, 3);
39 
40 const boot_module_t *boot_modules[] =
41 {
42 #ifdef EFI_ZFS_BOOT
43 	&zfs_module,
44 #endif
45 #ifdef EFI_UFS_BOOT
46 	&ufs_module
47 #endif
48 };
49 const UINTN num_boot_modules = nitems(boot_modules);
50 
51 static EFI_GUID BlockIoProtocolGUID = BLOCK_IO_PROTOCOL;
52 static EFI_GUID DevicePathGUID = DEVICE_PATH_PROTOCOL;
53 static EFI_GUID LoadedImageGUID = LOADED_IMAGE_PROTOCOL;
54 static EFI_GUID ConsoleControlGUID = EFI_CONSOLE_CONTROL_PROTOCOL_GUID;
55 
56 /*
57  * Provide Malloc / Free / Calloc backed by EFIs AllocatePool / FreePool which ensures
58  * memory is correctly aligned avoiding EFI_INVALID_PARAMETER returns from
59  * EFI methods.
60  */
61 
62 void *
63 Malloc(size_t len, const char *file __unused, int line __unused)
64 {
65 	void *out;
66 
67 	if (BS->AllocatePool(EfiLoaderData, len, &out) == EFI_SUCCESS)
68 		return (out);
69 
70 	return (NULL);
71 }
72 
73 void
74 Free(void *buf, const char *file __unused, int line __unused)
75 {
76 	if (buf != NULL)
77 		(void)BS->FreePool(buf);
78 }
79 
80 void *
81 Calloc(size_t n1, size_t n2, const char *file, int line)
82 {
83 	size_t bytes;
84 	void *res;
85 
86 	bytes = n1 * n2;
87 	if ((res = Malloc(bytes, file, line)) != NULL)
88 		bzero(res, bytes);
89 
90 	return (res);
91 }
92 
93 /*
94  * try_boot only returns if it fails to load the loader. If it succeeds
95  * it simply boots, otherwise it returns the status of last EFI call.
96  */
97 EFI_STATUS
98 try_boot(const boot_module_t *mod, dev_info_t *dev, void *loaderbuf, size_t loadersize)
99 {
100 	size_t bufsize, cmdsize;
101 	void *buf;
102 	char *cmd;
103 	EFI_HANDLE loaderhandle;
104 	EFI_LOADED_IMAGE *loaded_image;
105 	EFI_STATUS status;
106 
107 	/*
108 	 * Read in and parse the command line from /boot.config or /boot/config,
109 	 * if present. We'll pass it the next stage via a simple ASCII
110 	 * string. loader.efi has a hack for ASCII strings, so we'll use that to
111 	 * keep the size down here. We only try to read the alternate file if
112 	 * we get EFI_NOT_FOUND because all other errors mean that the boot_module
113 	 * had troubles with the filesystem. We could return early, but we'll let
114 	 * loading the actual kernel sort all that out. Since these files are
115 	 * optional, we don't report errors in trying to read them.
116 	 */
117 	cmd = NULL;
118 	cmdsize = 0;
119 	status = mod->load(PATH_DOTCONFIG, dev, &buf, &bufsize);
120 	if (status == EFI_NOT_FOUND)
121 		status = mod->load(PATH_CONFIG, dev, &buf, &bufsize);
122 	if (status == EFI_SUCCESS) {
123 		cmdsize = bufsize + 1;
124 		cmd = malloc(cmdsize);
125 		if (cmd == NULL)
126 			goto errout;
127 		memcpy(cmd, buf, bufsize);
128 		cmd[bufsize] = '\0';
129 		free(buf);
130 		buf = NULL;
131 	}
132 
133 	if ((status = BS->LoadImage(TRUE, IH, efi_devpath_last_node(dev->devpath),
134 	    loaderbuf, loadersize, &loaderhandle)) != EFI_SUCCESS) {
135 		printf("Failed to load image provided by %s, size: %zu, (%lu)\n",
136 		     mod->name, loadersize, EFI_ERROR_CODE(status));
137 		goto errout;
138 	}
139 
140 	status = OpenProtocolByHandle(loaderhandle, &LoadedImageGUID,
141 	    (void **)&loaded_image);
142 	if (status != EFI_SUCCESS) {
143 		printf("Failed to query LoadedImage provided by %s (%lu)\n",
144 		    mod->name, EFI_ERROR_CODE(status));
145 		goto errout;
146 	}
147 
148 	if (cmd != NULL)
149 		printf("    command args: %s\n", cmd);
150 
151 	loaded_image->DeviceHandle = dev->devhandle;
152 	loaded_image->LoadOptionsSize = cmdsize;
153 	loaded_image->LoadOptions = cmd;
154 
155 	DPRINTF("Starting '%s' in 5 seconds...", PATH_LOADER_EFI);
156 	DSTALL(1000000);
157 	DPRINTF(".");
158 	DSTALL(1000000);
159 	DPRINTF(".");
160 	DSTALL(1000000);
161 	DPRINTF(".");
162 	DSTALL(1000000);
163 	DPRINTF(".");
164 	DSTALL(1000000);
165 	DPRINTF(".\n");
166 
167 	if ((status = BS->StartImage(loaderhandle, NULL, NULL)) !=
168 	    EFI_SUCCESS) {
169 		printf("Failed to start image provided by %s (%lu)\n",
170 		    mod->name, EFI_ERROR_CODE(status));
171 		loaded_image->LoadOptionsSize = 0;
172 		loaded_image->LoadOptions = NULL;
173 	}
174 
175 errout:
176 	if (cmd != NULL)
177 		free(cmd);
178 	if (buf != NULL)
179 		free(buf);
180 	if (loaderbuf != NULL)
181 		free(loaderbuf);
182 
183 	return (status);
184 }
185 
186 EFI_STATUS
187 efi_main(EFI_HANDLE Ximage, EFI_SYSTEM_TABLE *Xsystab)
188 {
189 	EFI_HANDLE *handles;
190 	EFI_LOADED_IMAGE *img;
191 	EFI_DEVICE_PATH *imgpath;
192 	EFI_STATUS status;
193 	EFI_CONSOLE_CONTROL_PROTOCOL *ConsoleControl = NULL;
194 	SIMPLE_TEXT_OUTPUT_INTERFACE *conout = NULL;
195 	UINTN i, hsize, nhandles;
196 	CHAR16 *text;
197 
198 	/* Basic initialization*/
199 	ST = Xsystab;
200 	IH = Ximage;
201 	BS = ST->BootServices;
202 	RS = ST->RuntimeServices;
203 
204 	/* Set up the console, so printf works. */
205 	status = BS->LocateProtocol(&ConsoleControlGUID, NULL,
206 	    (VOID **)&ConsoleControl);
207 	if (status == EFI_SUCCESS)
208 		(void)ConsoleControl->SetMode(ConsoleControl,
209 		    EfiConsoleControlScreenText);
210 	/*
211 	 * Reset the console enable the cursor. Later we'll choose a better
212 	 * console size through GOP/UGA.
213 	 */
214 	conout = ST->ConOut;
215 	conout->Reset(conout, TRUE);
216 	/* Explicitly set conout to mode 0, 80x25 */
217 	conout->SetMode(conout, 0);
218 	conout->EnableCursor(conout, TRUE);
219 	conout->ClearScreen(conout);
220 
221 	printf("\n>> FreeBSD EFI boot block\n");
222 	printf("   Loader path: %s\n\n", PATH_LOADER_EFI);
223 	printf("   Initializing modules:");
224 	for (i = 0; i < num_boot_modules; i++) {
225 		printf(" %s", boot_modules[i]->name);
226 		if (boot_modules[i]->init != NULL)
227 			boot_modules[i]->init();
228 	}
229 	putchar('\n');
230 
231 	/* Fetch all the block I/O handles, we have to search through them later */
232 	hsize = 0;
233 	BS->LocateHandle(ByProtocol, &BlockIoProtocolGUID, NULL,
234 	    &hsize, NULL);
235 	handles = malloc(hsize);
236 	if (handles == NULL)
237 		efi_panic(EFI_OUT_OF_RESOURCES, "Failed to allocate %d handles\n",
238 		    hsize);
239 	status = BS->LocateHandle(ByProtocol, &BlockIoProtocolGUID,
240 	    NULL, &hsize, handles);
241 	if (status != EFI_SUCCESS)
242 		efi_panic(status, "Failed to get device handles\n");
243 	nhandles = hsize / sizeof(*handles);
244 
245 	/* Determine the devpath of our image so we can prefer it. */
246 	status = OpenProtocolByHandle(IH, &LoadedImageGUID, (void **)&img);
247 	imgpath = NULL;
248 	if (status == EFI_SUCCESS) {
249 		text = efi_devpath_name(img->FilePath);
250 		if (text != NULL) {
251 			printf("   Load Path: %S\n", text);
252 			efi_setenv_freebsd_wcs("Boot1Path", text);
253 			efi_free_devpath_name(text);
254 		}
255 
256 		status = OpenProtocolByHandle(img->DeviceHandle,
257 		    &DevicePathGUID, (void **)&imgpath);
258 		if (status != EFI_SUCCESS) {
259 			DPRINTF("Failed to get image DevicePath (%lu)\n",
260 			    EFI_ERROR_CODE(status));
261 		} else {
262 			text = efi_devpath_name(imgpath);
263 			if (text != NULL) {
264 				printf("   Load Device: %S\n", text);
265 				efi_setenv_freebsd_wcs("Boot1Dev", text);
266 				efi_free_devpath_name(text);
267 			}
268 		}
269 	}
270 
271 	choice_protocol(handles, nhandles, imgpath);
272 
273 	/* If we get here, we're out of luck... */
274 	efi_panic(EFI_LOAD_ERROR, "No bootable partitions found!");
275 }
276 
277 /*
278  * add_device adds a device to the passed devinfo list.
279  */
280 void
281 add_device(dev_info_t **devinfop, dev_info_t *devinfo)
282 {
283 	dev_info_t *dev;
284 
285 	if (*devinfop == NULL) {
286 		*devinfop = devinfo;
287 		return;
288 	}
289 
290 	for (dev = *devinfop; dev->next != NULL; dev = dev->next)
291 		;
292 
293 	dev->next = devinfo;
294 }
295 
296 void
297 efi_exit(EFI_STATUS s)
298 {
299 	BS->Exit(IH, s, 0, NULL);
300 }
301 
302 void
303 exit(int error __unused)
304 {
305 	efi_exit(EFI_LOAD_ERROR);
306 }
307 
308 /*
309  * OK. We totally give up. Exit back to EFI with a sensible status so
310  * it can try the next option on the list.
311  */
312 static void
313 efi_panic(EFI_STATUS s, const char *fmt, ...)
314 {
315 	va_list ap;
316 
317 	printf("panic: ");
318 	va_start(ap, fmt);
319 	vprintf(fmt, ap);
320 	va_end(ap);
321 	printf("\n");
322 
323 	efi_exit(s);
324 }
325 
326 int getchar(void)
327 {
328 	return (-1);
329 }
330 
331 void
332 putchar(int c)
333 {
334 	CHAR16 buf[2];
335 
336 	if (c == '\n') {
337 		buf[0] = '\r';
338 		buf[1] = 0;
339 		ST->ConOut->OutputString(ST->ConOut, buf);
340 	}
341 	buf[0] = c;
342 	buf[1] = 0;
343 	ST->ConOut->OutputString(ST->ConOut, buf);
344 }
345