xref: /freebsd/sys/amd64/conf/MINIMAL (revision 4e8d558c)
1#
2# MINIMAL -- Mostly Minimal kernel configuration file for FreeBSD/amd64
3#
4# Many definitions of minimal are possible. The one this file follows is
5# GENERIC, minus all functionality that can be replaced by loading kernel
6# modules.
7#
8# Exceptions:
9# o (non-loaded) random is included due to uncertainty...
10# o Many networking things are included
11#
12# For now, please run changes to these list past imp@freebsd.org
13#
14# For more information on this file, please read the config(5) manual page,
15# and/or the handbook section on Kernel Configuration Files:
16#
17#    https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config
18#
19# The handbook is also available locally in /usr/share/doc/handbook
20# if you've installed the doc distribution, otherwise always see the
21# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the
22# latest information.
23#
24# An exhaustive list of options and more detailed explanations of the
25# device lines is also present in the ../../conf/NOTES and NOTES files.
26# If you are in doubt as to the purpose or necessity of a line, check first
27# in NOTES.
28#
29# $FreeBSD$
30
31cpu		HAMMER
32ident		MINIMAL
33
34makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols
35makeoptions	WITH_CTF=1		# Run ctfconvert(1) for DTrace support
36
37options 	SCHED_ULE		# ULE scheduler
38options 	NUMA			# Non-Uniform Memory Architecture support
39options 	PREEMPTION		# Enable kernel thread preemption
40options 	INET			# InterNETworking
41options 	INET6			# IPv6 communications protocols
42options 	TCP_OFFLOAD		# TCP offload
43options 	SCTP_SUPPORT		# Allow kldload of SCTP
44options 	SOFTUPDATES		# Enable FFS soft updates support
45options 	UFS_ACL			# Support for access control lists
46options 	UFS_DIRHASH		# Improve performance on big directories
47options 	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
48options 	QUOTA			# Enable disk quotas for UFS
49options 	MD_ROOT			# MD is a potential root device
50options 	GEOM_LABEL		# Provides labelization
51options 	COMPAT_FREEBSD32	# Compatible with i386 binaries
52options 	COMPAT_FREEBSD4		# Compatible with FreeBSD4
53options 	COMPAT_FREEBSD5		# Compatible with FreeBSD5
54options 	COMPAT_FREEBSD6		# Compatible with FreeBSD6
55options 	COMPAT_FREEBSD7		# Compatible with FreeBSD7
56options 	COMPAT_FREEBSD9		# Compatible with FreeBSD9
57options 	COMPAT_FREEBSD10	# Compatible with FreeBSD10
58options 	COMPAT_FREEBSD11	# Compatible with FreeBSD11
59options 	COMPAT_FREEBSD12	# Compatible with FreeBSD12
60options 	COMPAT_FREEBSD13	# Compatible with FreeBSD13
61options 	SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
62options 	KTRACE			# ktrace(1) support
63options 	STACK			# stack(9) support
64options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
65options 	PRINTF_BUFR_SIZE=128	# Prevent printf output being interspersed.
66options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
67options 	HWPMC_HOOKS		# Necessary kernel hooks for hwpmc(4)
68options 	AUDIT			# Security event auditing
69options 	CAPABILITY_MODE		# Capsicum capability mode
70options 	CAPABILITIES		# Capsicum capabilities
71options 	MAC			# TrustedBSD MAC Framework
72options 	KDTRACE_FRAME		# Ensure frames are compiled in
73options 	KDTRACE_HOOKS		# Kernel DTrace hooks
74options 	DDB_CTF			# Kernel ELF linker loads CTF data
75options 	INCLUDE_CONFIG_FILE	# Include this file in kernel
76
77# Debugging support.  Always need this:
78options 	KDB			# Enable kernel debugger support.
79options 	KDB_TRACE		# Print a stack trace for a panic.
80
81# Make an SMP-capable kernel by default
82options 	SMP			# Symmetric MultiProcessor Kernel
83options 	EARLY_AP_STARTUP
84
85# CPU frequency control
86device		cpufreq
87
88# Bus support.
89device		acpi
90options 	IOMMU
91device		pci
92
93# atkbdc0 controls both the keyboard and the PS/2 mouse
94device		atkbdc			# AT keyboard controller
95device		atkbd			# AT keyboard
96device		psm			# PS/2 mouse
97
98device		kbdmux			# keyboard multiplexer
99
100# syscons is the legacy console driver, resembling an SCO console
101device		vga			# VGA video card driver
102device		splash			# Splash screen and screen saver support
103device		sc
104options 	SC_PIXEL_MODE		# add support for the raster text mode
105
106# vt is the default video console driver
107device		vt
108device		vt_vga
109device		vt_efifb
110device		vt_vbefb
111
112device		agp			# support several AGP chipsets
113
114# Serial (COM) ports
115device		uart			# Generic UART driver
116
117# Pseudo devices.
118device		loop			# Network loopback
119device		padlock_rng		# VIA Padlock RNG
120device		rdrand_rng		# Intel Bull Mountain RNG
121device		ether			# Ethernet support
122
123# The `bpf' device enables the Berkeley Packet Filter.
124# Be aware of the administrative consequences of enabling this!
125# Note that 'bpf' is required for DHCP.
126device		bpf			# Berkeley packet filter
127
128# VirtIO support
129device		virtio			# Generic VirtIO bus (required)
130device		virtio_pci		# VirtIO PCI device
131device		vtnet			# VirtIO Ethernet device
132device		virtio_blk		# VirtIO Block device
133device		virtio_balloon		# VirtIO Memory Balloon device
134
135# Linux KVM paravirtualization support
136device		kvm_clock		# KVM paravirtual clock driver
137
138# Xen HVM Guest Optimizations
139# NOTE: XENHVM depends on xenpci and xentimer.
140# They must be added or removed together.
141options 	XENHVM			# Xen HVM kernel infrastructure
142device		xenefi			# Xen EFI timer device
143device		xenpci			# Xen HVM Hypervisor services driver
144device		xentimer		# Xen x86 PV timer device
145
146# evdev interface
147options 	EVDEV_SUPPORT		# evdev support in legacy drivers
148device		evdev			# input event device support
149device		uinput			# install /dev/uinput cdev
150