1 /*- 2 * Copyright (c) 2011 The FreeBSD Foundation 3 * All rights reserved. 4 * 5 * Developed by Ben Gray <ben.r.gray@gmail.com> 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. The name of the company nor the name of the author may be used to 16 * endorse or promote products derived from this software without specific 17 * prior written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 */ 31 32 /** 33 * The ARM Cortex-A9 core can support a global timer plus a private and 34 * watchdog timer per core. This driver reserves memory and interrupt 35 * resources for accessing both timer register sets, these resources are 36 * stored globally and used to setup the timecount and eventtimer. 37 * 38 * The timecount timer uses the global 64-bit counter, whereas the 39 * per-CPU eventtimer uses the private 32-bit counters. 40 * 41 * 42 * REF: ARM Cortex-A9 MPCore, Technical Reference Manual (rev. r2p2) 43 */ 44 45 #include <sys/cdefs.h> 46 __FBSDID("$FreeBSD$"); 47 48 #include <sys/param.h> 49 #include <sys/systm.h> 50 #include <sys/bus.h> 51 #include <sys/kernel.h> 52 #include <sys/module.h> 53 #include <sys/malloc.h> 54 #include <sys/rman.h> 55 #include <sys/timeet.h> 56 #include <sys/timetc.h> 57 #include <sys/watchdog.h> 58 #include <machine/bus.h> 59 #include <machine/cpu.h> 60 #include <machine/intr.h> 61 62 #include <dev/fdt/fdt_common.h> 63 #include <dev/ofw/openfirm.h> 64 #include <dev/ofw/ofw_bus.h> 65 #include <dev/ofw/ofw_bus_subr.h> 66 67 #include <machine/bus.h> 68 #include <machine/fdt.h> 69 70 /* Private (per-CPU) timer register map */ 71 #define PRV_TIMER_LOAD 0x0000 72 #define PRV_TIMER_COUNT 0x0004 73 #define PRV_TIMER_CTRL 0x0008 74 #define PRV_TIMER_INTR 0x000C 75 76 #define PRV_TIMER_CTR_PRESCALER_SHIFT 8 77 #define PRV_TIMER_CTRL_IRQ_ENABLE (1UL << 2) 78 #define PRV_TIMER_CTRL_AUTO_RELOAD (1UL << 1) 79 #define PRV_TIMER_CTRL_TIMER_ENABLE (1UL << 0) 80 81 #define PRV_TIMER_INTR_EVENT (1UL << 0) 82 83 /* Global timer register map */ 84 #define GBL_TIMER_COUNT_LOW 0x0000 85 #define GBL_TIMER_COUNT_HIGH 0x0004 86 #define GBL_TIMER_CTRL 0x0008 87 #define GBL_TIMER_INTR 0x000C 88 89 #define GBL_TIMER_CTR_PRESCALER_SHIFT 8 90 #define GBL_TIMER_CTRL_AUTO_INC (1UL << 3) 91 #define GBL_TIMER_CTRL_IRQ_ENABLE (1UL << 2) 92 #define GBL_TIMER_CTRL_COMP_ENABLE (1UL << 1) 93 #define GBL_TIMER_CTRL_TIMER_ENABLE (1UL << 0) 94 95 #define GBL_TIMER_INTR_EVENT (1UL << 0) 96 97 struct arm_tmr_softc { 98 struct resource * tmr_res[4]; 99 bus_space_tag_t prv_bst; 100 bus_space_tag_t gbl_bst; 101 bus_space_handle_t prv_bsh; 102 bus_space_handle_t gbl_bsh; 103 uint32_t clkfreq; 104 struct eventtimer et; 105 }; 106 107 static struct resource_spec arm_tmr_spec[] = { 108 { SYS_RES_MEMORY, 0, RF_ACTIVE }, /* Global registers */ 109 { SYS_RES_IRQ, 0, RF_ACTIVE }, /* Global timer interrupt (unused) */ 110 { SYS_RES_MEMORY, 1, RF_ACTIVE }, /* Private (per-CPU) registers */ 111 { SYS_RES_IRQ, 1, RF_ACTIVE }, /* Private timer interrupt */ 112 { -1, 0 } 113 }; 114 115 static struct arm_tmr_softc *arm_tmr_sc = NULL; 116 117 uint32_t platform_arm_tmr_freq = 0; 118 119 #define tmr_prv_read_4(reg) \ 120 bus_space_read_4(arm_tmr_sc->prv_bst, arm_tmr_sc->prv_bsh, reg) 121 #define tmr_prv_write_4(reg, val) \ 122 bus_space_write_4(arm_tmr_sc->prv_bst, arm_tmr_sc->prv_bsh, reg, val) 123 #define tmr_gbl_read_4(reg) \ 124 bus_space_read_4(arm_tmr_sc->gbl_bst, arm_tmr_sc->gbl_bsh, reg) 125 #define tmr_gbl_write_4(reg, val) \ 126 bus_space_write_4(arm_tmr_sc->gbl_bst, arm_tmr_sc->gbl_bsh, reg, val) 127 128 129 static timecounter_get_t arm_tmr_get_timecount; 130 131 static struct timecounter arm_tmr_timecount = { 132 .tc_name = "MPCore", 133 .tc_get_timecount = arm_tmr_get_timecount, 134 .tc_poll_pps = NULL, 135 .tc_counter_mask = ~0u, 136 .tc_frequency = 0, 137 .tc_quality = 800, 138 }; 139 140 /** 141 * arm_tmr_get_timecount - reads the timecount (global) timer 142 * @tc: pointer to arm_tmr_timecount struct 143 * 144 * We only read the lower 32-bits, the timecount stuff only uses 32-bits 145 * so (for now?) ignore the upper 32-bits. 146 * 147 * RETURNS 148 * The lower 32-bits of the counter. 149 */ 150 static unsigned 151 arm_tmr_get_timecount(struct timecounter *tc) 152 { 153 return (tmr_gbl_read_4(GBL_TIMER_COUNT_LOW)); 154 } 155 156 /** 157 * arm_tmr_start - starts the eventtimer (private) timer 158 * @et: pointer to eventtimer struct 159 * @first: the number of seconds and fractional sections to trigger in 160 * @period: the period (in seconds and fractional sections) to set 161 * 162 * If the eventtimer is required to be in oneshot mode, period will be 163 * NULL and first will point to the time to trigger. If in periodic mode 164 * period will contain the time period and first may optionally contain 165 * the time for the first period. 166 * 167 * RETURNS 168 * Always returns 0 169 */ 170 static int 171 arm_tmr_start(struct eventtimer *et, sbintime_t first, sbintime_t period) 172 { 173 uint32_t load, count; 174 uint32_t ctrl; 175 176 ctrl = PRV_TIMER_CTRL_IRQ_ENABLE | PRV_TIMER_CTRL_TIMER_ENABLE; 177 178 if (period != 0) { 179 load = ((uint32_t)et->et_frequency * period) >> 32; 180 ctrl |= PRV_TIMER_CTRL_AUTO_RELOAD; 181 } else 182 load = 0; 183 184 if (first != 0) 185 count = ((uint32_t)et->et_frequency * first) >> 32; 186 else 187 count = load; 188 189 tmr_prv_write_4(PRV_TIMER_LOAD, load); 190 tmr_prv_write_4(PRV_TIMER_COUNT, count); 191 192 tmr_prv_write_4(PRV_TIMER_CTRL, ctrl); 193 return (0); 194 } 195 196 /** 197 * arm_tmr_stop - stops the eventtimer (private) timer 198 * @et: pointer to eventtimer struct 199 * 200 * Simply stops the private timer by clearing all bits in the ctrl register. 201 * 202 * RETURNS 203 * Always returns 0 204 */ 205 static int 206 arm_tmr_stop(struct eventtimer *et) 207 { 208 tmr_prv_write_4(PRV_TIMER_CTRL, 0); 209 return (0); 210 } 211 212 /** 213 * arm_tmr_intr - ISR for the eventtimer (private) timer 214 * @arg: pointer to arm_tmr_softc struct 215 * 216 * Clears the event register and then calls the eventtimer callback. 217 * 218 * RETURNS 219 * Always returns FILTER_HANDLED 220 */ 221 static int 222 arm_tmr_intr(void *arg) 223 { 224 struct arm_tmr_softc *sc = (struct arm_tmr_softc *)arg; 225 226 tmr_prv_write_4(PRV_TIMER_INTR, PRV_TIMER_INTR_EVENT); 227 228 if (sc->et.et_active) 229 sc->et.et_event_cb(&sc->et, sc->et.et_arg); 230 231 return (FILTER_HANDLED); 232 } 233 234 235 236 237 /** 238 * arm_tmr_probe - timer probe routine 239 * @dev: new device 240 * 241 * The probe function returns success when probed with the fdt compatible 242 * string set to "arm,mpcore-timers". 243 * 244 * RETURNS 245 * BUS_PROBE_DEFAULT if the fdt device is compatible, otherwise ENXIO. 246 */ 247 static int 248 arm_tmr_probe(device_t dev) 249 { 250 251 if (!ofw_bus_status_okay(dev)) 252 return (ENXIO); 253 254 if (!ofw_bus_is_compatible(dev, "arm,mpcore-timers")) 255 return (ENXIO); 256 257 device_set_desc(dev, "ARM MPCore Timers"); 258 return (BUS_PROBE_DEFAULT); 259 } 260 261 /** 262 * arm_tmr_attach - attaches the timer to the simplebus 263 * @dev: new device 264 * 265 * Reserves memory and interrupt resources, stores the softc structure 266 * globally and registers both the timecount and eventtimer objects. 267 * 268 * RETURNS 269 * Zero on sucess or ENXIO if an error occuried. 270 */ 271 static int 272 arm_tmr_attach(device_t dev) 273 { 274 struct arm_tmr_softc *sc = device_get_softc(dev); 275 phandle_t node; 276 pcell_t clock; 277 void *ihl; 278 279 if (arm_tmr_sc) 280 return (ENXIO); 281 282 if (platform_arm_tmr_freq != 0) 283 sc->clkfreq = platform_arm_tmr_freq; 284 else { 285 /* Get the base clock frequency */ 286 node = ofw_bus_get_node(dev); 287 if ((OF_getprop(node, "clock-frequency", &clock, 288 sizeof(clock))) <= 0) { 289 device_printf(dev, "missing clock-frequency attribute in FDT\n"); 290 return (ENXIO); 291 } 292 sc->clkfreq = fdt32_to_cpu(clock); 293 } 294 295 296 if (bus_alloc_resources(dev, arm_tmr_spec, sc->tmr_res)) { 297 device_printf(dev, "could not allocate resources\n"); 298 return (ENXIO); 299 } 300 301 /* Global timer interface */ 302 sc->gbl_bst = rman_get_bustag(sc->tmr_res[0]); 303 sc->gbl_bsh = rman_get_bushandle(sc->tmr_res[0]); 304 305 /* Private per-CPU timer interface */ 306 sc->prv_bst = rman_get_bustag(sc->tmr_res[2]); 307 sc->prv_bsh = rman_get_bushandle(sc->tmr_res[2]); 308 309 arm_tmr_sc = sc; 310 311 /* Disable both timers to start off */ 312 tmr_prv_write_4(PRV_TIMER_CTRL, 0x00000000); 313 tmr_gbl_write_4(GBL_TIMER_CTRL, 0x00000000); 314 315 /* Setup and enable the global timer to use as the timecounter */ 316 tmr_gbl_write_4(GBL_TIMER_CTRL, (0x00 << GBL_TIMER_CTR_PRESCALER_SHIFT) | 317 GBL_TIMER_CTRL_TIMER_ENABLE); 318 319 arm_tmr_timecount.tc_frequency = sc->clkfreq; 320 tc_init(&arm_tmr_timecount); 321 322 /* Setup and enable the timer */ 323 if (bus_setup_intr(dev, sc->tmr_res[3], INTR_TYPE_CLK, arm_tmr_intr, 324 NULL, sc, &ihl) != 0) { 325 bus_release_resources(dev, arm_tmr_spec, sc->tmr_res); 326 device_printf(dev, "Unable to setup the clock irq handler.\n"); 327 return (ENXIO); 328 } 329 330 sc->et.et_name = "MPCore"; 331 sc->et.et_flags = ET_FLAGS_PERIODIC | ET_FLAGS_ONESHOT | ET_FLAGS_PERCPU; 332 sc->et.et_quality = 1000; 333 334 sc->et.et_frequency = sc->clkfreq; 335 sc->et.et_min_period = (0x00000002LLU << 32) / sc->et.et_frequency; 336 sc->et.et_max_period = (0xfffffffeLLU << 32) / sc->et.et_frequency; 337 sc->et.et_start = arm_tmr_start; 338 sc->et.et_stop = arm_tmr_stop; 339 sc->et.et_priv = sc; 340 et_register(&sc->et); 341 342 return (0); 343 } 344 345 static device_method_t arm_tmr_methods[] = { 346 DEVMETHOD(device_probe, arm_tmr_probe), 347 DEVMETHOD(device_attach, arm_tmr_attach), 348 { 0, 0 } 349 }; 350 351 static driver_t arm_tmr_driver = { 352 "mp_tmr", 353 arm_tmr_methods, 354 sizeof(struct arm_tmr_softc), 355 }; 356 357 static devclass_t arm_tmr_devclass; 358 359 DRIVER_MODULE(mp_tmr, simplebus, arm_tmr_driver, arm_tmr_devclass, 0, 0); 360 361 /** 362 * DELAY - Delay for at least usec microseconds. 363 * @usec: number of microseconds to delay by 364 * 365 * This function is called all over the kernel and is suppose to provide a 366 * consistent delay. This function may also be called before the console 367 * is setup so no printf's can be called here. 368 * 369 * RETURNS: 370 * nothing 371 */ 372 static void __used /* Must emit function code for the weak ref below. */ 373 arm_tmr_DELAY(int usec) 374 { 375 int32_t counts_per_usec; 376 int32_t counts; 377 uint32_t first, last; 378 379 /* Check the timers are setup, if not just use a for loop for the meantime */ 380 if (arm_tmr_sc == NULL) { 381 for (; usec > 0; usec--) 382 for (counts = 200; counts > 0; counts--) 383 cpufunc_nullop(); /* Prevent gcc from optimizing 384 * out the loop 385 */ 386 return; 387 } 388 389 /* Get the number of times to count */ 390 counts_per_usec = ((arm_tmr_timecount.tc_frequency / 1000000) + 1); 391 392 /* 393 * Clamp the timeout at a maximum value (about 32 seconds with 394 * a 66MHz clock). *Nobody* should be delay()ing for anywhere 395 * near that length of time and if they are, they should be hung 396 * out to dry. 397 */ 398 if (usec >= (0x80000000U / counts_per_usec)) 399 counts = (0x80000000U / counts_per_usec) - 1; 400 else 401 counts = usec * counts_per_usec; 402 403 first = tmr_gbl_read_4(GBL_TIMER_COUNT_LOW); 404 405 while (counts > 0) { 406 last = tmr_gbl_read_4(GBL_TIMER_COUNT_LOW); 407 counts -= (int32_t)(last - first); 408 first = last; 409 } 410 } 411 412 /* 413 * Supply a DELAY() implementation via weak linkage. A platform may want to use 414 * the mpcore per-cpu eventtimers but provide its own DELAY() routine, 415 * especially when the core frequency can change on the fly. 416 */ 417 __weak_reference(arm_tmr_DELAY, DELAY); 418 419