1 /*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Copyright (c) 2011 The FreeBSD Foundation 5 * All rights reserved. 6 * 7 * Developed by Ben Gray <ben.r.gray@gmail.com> 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. The name of the company nor the name of the author may be used to 18 * endorse or promote products derived from this software without specific 19 * prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 */ 33 34 /** 35 * The ARM Cortex-A9 core can support a global timer plus a private and 36 * watchdog timer per core. This driver reserves memory and interrupt 37 * resources for accessing both timer register sets, these resources are 38 * stored globally and used to setup the timecount and eventtimer. 39 * 40 * The timecount timer uses the global 64-bit counter, whereas the 41 * per-CPU eventtimer uses the private 32-bit counters. 42 * 43 * 44 * REF: ARM Cortex-A9 MPCore, Technical Reference Manual (rev. r2p2) 45 */ 46 47 #include <sys/cdefs.h> 48 __FBSDID("$FreeBSD$"); 49 50 #include <sys/param.h> 51 #include <sys/systm.h> 52 #include <sys/bus.h> 53 #include <sys/kernel.h> 54 #include <sys/module.h> 55 #include <sys/malloc.h> 56 #include <sys/rman.h> 57 #include <sys/timeet.h> 58 #include <sys/timetc.h> 59 #include <sys/watchdog.h> 60 #include <machine/bus.h> 61 #include <machine/cpu.h> 62 #include <machine/intr.h> 63 64 #include <machine/machdep.h> /* For arm_set_delay */ 65 66 #include <dev/ofw/openfirm.h> 67 #include <dev/ofw/ofw_bus.h> 68 #include <dev/ofw/ofw_bus_subr.h> 69 70 #include <machine/bus.h> 71 72 #include <arm/arm/mpcore_timervar.h> 73 74 /* Private (per-CPU) timer register map */ 75 #define PRV_TIMER_LOAD 0x0000 76 #define PRV_TIMER_COUNT 0x0004 77 #define PRV_TIMER_CTRL 0x0008 78 #define PRV_TIMER_INTR 0x000C 79 80 #define PRV_TIMER_CTR_PRESCALER_SHIFT 8 81 #define PRV_TIMER_CTRL_IRQ_ENABLE (1UL << 2) 82 #define PRV_TIMER_CTRL_AUTO_RELOAD (1UL << 1) 83 #define PRV_TIMER_CTRL_TIMER_ENABLE (1UL << 0) 84 85 #define PRV_TIMER_INTR_EVENT (1UL << 0) 86 87 /* Global timer register map */ 88 #define GBL_TIMER_COUNT_LOW 0x0000 89 #define GBL_TIMER_COUNT_HIGH 0x0004 90 #define GBL_TIMER_CTRL 0x0008 91 #define GBL_TIMER_INTR 0x000C 92 93 #define GBL_TIMER_CTR_PRESCALER_SHIFT 8 94 #define GBL_TIMER_CTRL_AUTO_INC (1UL << 3) 95 #define GBL_TIMER_CTRL_IRQ_ENABLE (1UL << 2) 96 #define GBL_TIMER_CTRL_COMP_ENABLE (1UL << 1) 97 #define GBL_TIMER_CTRL_TIMER_ENABLE (1UL << 0) 98 99 #define GBL_TIMER_INTR_EVENT (1UL << 0) 100 101 struct arm_tmr_softc { 102 device_t dev; 103 int irqrid; 104 int memrid; 105 struct resource * gbl_mem; 106 struct resource * prv_mem; 107 struct resource * prv_irq; 108 uint64_t clkfreq; 109 struct eventtimer et; 110 }; 111 112 static struct eventtimer *arm_tmr_et; 113 static struct timecounter *arm_tmr_tc; 114 static uint64_t arm_tmr_freq; 115 static boolean_t arm_tmr_freq_varies; 116 117 #define tmr_prv_read_4(sc, reg) bus_read_4((sc)->prv_mem, reg) 118 #define tmr_prv_write_4(sc, reg, val) bus_write_4((sc)->prv_mem, reg, val) 119 #define tmr_gbl_read_4(sc, reg) bus_read_4((sc)->gbl_mem, reg) 120 #define tmr_gbl_write_4(sc, reg, val) bus_write_4((sc)->gbl_mem, reg, val) 121 122 static void arm_tmr_delay(int, void *); 123 124 static timecounter_get_t arm_tmr_get_timecount; 125 126 static struct timecounter arm_tmr_timecount = { 127 .tc_name = "MPCore", 128 .tc_get_timecount = arm_tmr_get_timecount, 129 .tc_poll_pps = NULL, 130 .tc_counter_mask = ~0u, 131 .tc_frequency = 0, 132 .tc_quality = 800, 133 }; 134 135 #define TMR_GBL 0x01 136 #define TMR_PRV 0x02 137 #define TMR_BOTH (TMR_GBL | TMR_PRV) 138 #define TMR_NONE 0 139 140 static struct ofw_compat_data compat_data[] = { 141 {"arm,mpcore-timers", TMR_BOTH}, /* Non-standard, FreeBSD. */ 142 {"arm,cortex-a9-global-timer", TMR_GBL}, 143 {"arm,cortex-a5-global-timer", TMR_GBL}, 144 {"arm,cortex-a9-twd-timer", TMR_PRV}, 145 {"arm,cortex-a5-twd-timer", TMR_PRV}, 146 {"arm,arm11mp-twd-timer", TMR_PRV}, 147 {NULL, TMR_NONE} 148 }; 149 150 /** 151 * arm_tmr_get_timecount - reads the timecount (global) timer 152 * @tc: pointer to arm_tmr_timecount struct 153 * 154 * We only read the lower 32-bits, the timecount stuff only uses 32-bits 155 * so (for now?) ignore the upper 32-bits. 156 * 157 * RETURNS 158 * The lower 32-bits of the counter. 159 */ 160 static unsigned 161 arm_tmr_get_timecount(struct timecounter *tc) 162 { 163 struct arm_tmr_softc *sc; 164 165 sc = tc->tc_priv; 166 return (tmr_gbl_read_4(sc, GBL_TIMER_COUNT_LOW)); 167 } 168 169 /** 170 * arm_tmr_start - starts the eventtimer (private) timer 171 * @et: pointer to eventtimer struct 172 * @first: the number of seconds and fractional sections to trigger in 173 * @period: the period (in seconds and fractional sections) to set 174 * 175 * If the eventtimer is required to be in oneshot mode, period will be 176 * NULL and first will point to the time to trigger. If in periodic mode 177 * period will contain the time period and first may optionally contain 178 * the time for the first period. 179 * 180 * RETURNS 181 * Always returns 0 182 */ 183 static int 184 arm_tmr_start(struct eventtimer *et, sbintime_t first, sbintime_t period) 185 { 186 struct arm_tmr_softc *sc; 187 uint32_t load, count; 188 uint32_t ctrl; 189 190 sc = et->et_priv; 191 tmr_prv_write_4(sc, PRV_TIMER_CTRL, 0); 192 tmr_prv_write_4(sc, PRV_TIMER_INTR, PRV_TIMER_INTR_EVENT); 193 194 ctrl = PRV_TIMER_CTRL_IRQ_ENABLE | PRV_TIMER_CTRL_TIMER_ENABLE; 195 196 if (period != 0) { 197 load = ((uint32_t)et->et_frequency * period) >> 32; 198 ctrl |= PRV_TIMER_CTRL_AUTO_RELOAD; 199 } else 200 load = 0; 201 202 if (first != 0) 203 count = (uint32_t)((et->et_frequency * first) >> 32); 204 else 205 count = load; 206 207 tmr_prv_write_4(sc, PRV_TIMER_LOAD, load); 208 tmr_prv_write_4(sc, PRV_TIMER_COUNT, count); 209 tmr_prv_write_4(sc, PRV_TIMER_CTRL, ctrl); 210 211 return (0); 212 } 213 214 /** 215 * arm_tmr_stop - stops the eventtimer (private) timer 216 * @et: pointer to eventtimer struct 217 * 218 * Simply stops the private timer by clearing all bits in the ctrl register. 219 * 220 * RETURNS 221 * Always returns 0 222 */ 223 static int 224 arm_tmr_stop(struct eventtimer *et) 225 { 226 struct arm_tmr_softc *sc; 227 228 sc = et->et_priv; 229 tmr_prv_write_4(sc, PRV_TIMER_CTRL, 0); 230 tmr_prv_write_4(sc, PRV_TIMER_INTR, PRV_TIMER_INTR_EVENT); 231 return (0); 232 } 233 234 /** 235 * arm_tmr_intr - ISR for the eventtimer (private) timer 236 * @arg: pointer to arm_tmr_softc struct 237 * 238 * Clears the event register and then calls the eventtimer callback. 239 * 240 * RETURNS 241 * Always returns FILTER_HANDLED 242 */ 243 static int 244 arm_tmr_intr(void *arg) 245 { 246 struct arm_tmr_softc *sc; 247 248 sc = arg; 249 tmr_prv_write_4(sc, PRV_TIMER_INTR, PRV_TIMER_INTR_EVENT); 250 if (sc->et.et_active) 251 sc->et.et_event_cb(&sc->et, sc->et.et_arg); 252 return (FILTER_HANDLED); 253 } 254 255 /** 256 * arm_tmr_probe - timer probe routine 257 * @dev: new device 258 * 259 * The probe function returns success when probed with the fdt compatible 260 * string set to "arm,mpcore-timers". 261 * 262 * RETURNS 263 * BUS_PROBE_DEFAULT if the fdt device is compatible, otherwise ENXIO. 264 */ 265 static int 266 arm_tmr_probe(device_t dev) 267 { 268 269 if (!ofw_bus_status_okay(dev)) 270 return (ENXIO); 271 272 if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == TMR_NONE) 273 return (ENXIO); 274 275 device_set_desc(dev, "ARM MPCore Timers"); 276 return (BUS_PROBE_DEFAULT); 277 } 278 279 static int 280 attach_tc(struct arm_tmr_softc *sc) 281 { 282 int rid; 283 284 if (arm_tmr_tc != NULL) 285 return (EBUSY); 286 287 rid = sc->memrid; 288 sc->gbl_mem = bus_alloc_resource_any(sc->dev, SYS_RES_MEMORY, &rid, 289 RF_ACTIVE); 290 if (sc->gbl_mem == NULL) { 291 device_printf(sc->dev, "could not allocate gbl mem resources\n"); 292 return (ENXIO); 293 } 294 tmr_gbl_write_4(sc, GBL_TIMER_CTRL, 0x00000000); 295 296 arm_tmr_timecount.tc_frequency = sc->clkfreq; 297 arm_tmr_timecount.tc_priv = sc; 298 tc_init(&arm_tmr_timecount); 299 arm_tmr_tc = &arm_tmr_timecount; 300 301 tmr_gbl_write_4(sc, GBL_TIMER_CTRL, GBL_TIMER_CTRL_TIMER_ENABLE); 302 303 return (0); 304 } 305 306 static int 307 attach_et(struct arm_tmr_softc *sc) 308 { 309 void *ihl; 310 int irid, mrid; 311 312 if (arm_tmr_et != NULL) 313 return (EBUSY); 314 315 mrid = sc->memrid; 316 sc->prv_mem = bus_alloc_resource_any(sc->dev, SYS_RES_MEMORY, &mrid, 317 RF_ACTIVE); 318 if (sc->prv_mem == NULL) { 319 device_printf(sc->dev, "could not allocate prv mem resources\n"); 320 return (ENXIO); 321 } 322 tmr_prv_write_4(sc, PRV_TIMER_CTRL, 0x00000000); 323 324 irid = sc->irqrid; 325 sc->prv_irq = bus_alloc_resource_any(sc->dev, SYS_RES_IRQ, &irid, RF_ACTIVE); 326 if (sc->prv_irq == NULL) { 327 bus_release_resource(sc->dev, SYS_RES_MEMORY, mrid, sc->prv_mem); 328 device_printf(sc->dev, "could not allocate prv irq resources\n"); 329 return (ENXIO); 330 } 331 332 if (bus_setup_intr(sc->dev, sc->prv_irq, INTR_TYPE_CLK, arm_tmr_intr, 333 NULL, sc, &ihl) != 0) { 334 bus_release_resource(sc->dev, SYS_RES_MEMORY, mrid, sc->prv_mem); 335 bus_release_resource(sc->dev, SYS_RES_IRQ, irid, sc->prv_irq); 336 device_printf(sc->dev, "unable to setup the et irq handler.\n"); 337 return (ENXIO); 338 } 339 340 /* 341 * Setup and register the eventtimer. Most event timers set their min 342 * and max period values to some value calculated from the clock 343 * frequency. We might not know yet what our runtime clock frequency 344 * will be, so we just use some safe values. A max of 2 seconds ensures 345 * that even if our base clock frequency is 2GHz (meaning a 4GHz CPU), 346 * we won't overflow our 32-bit timer count register. A min of 20 347 * nanoseconds is pretty much completely arbitrary. 348 */ 349 sc->et.et_name = "MPCore"; 350 sc->et.et_flags = ET_FLAGS_PERIODIC | ET_FLAGS_ONESHOT | ET_FLAGS_PERCPU; 351 sc->et.et_quality = 1000; 352 sc->et.et_frequency = sc->clkfreq; 353 sc->et.et_min_period = nstosbt(20); 354 sc->et.et_max_period = 2 * SBT_1S; 355 sc->et.et_start = arm_tmr_start; 356 sc->et.et_stop = arm_tmr_stop; 357 sc->et.et_priv = sc; 358 et_register(&sc->et); 359 arm_tmr_et = &sc->et; 360 361 return (0); 362 } 363 364 /** 365 * arm_tmr_attach - attaches the timer to the simplebus 366 * @dev: new device 367 * 368 * Reserves memory and interrupt resources, stores the softc structure 369 * globally and registers both the timecount and eventtimer objects. 370 * 371 * RETURNS 372 * Zero on success or ENXIO if an error occuried. 373 */ 374 static int 375 arm_tmr_attach(device_t dev) 376 { 377 struct arm_tmr_softc *sc; 378 phandle_t node; 379 pcell_t clock; 380 int et_err, tc_err, tmrtype; 381 382 sc = device_get_softc(dev); 383 sc->dev = dev; 384 385 if (arm_tmr_freq_varies) { 386 sc->clkfreq = arm_tmr_freq; 387 } else { 388 if (arm_tmr_freq != 0) { 389 sc->clkfreq = arm_tmr_freq; 390 } else { 391 /* Get the base clock frequency */ 392 node = ofw_bus_get_node(dev); 393 if ((OF_getencprop(node, "clock-frequency", &clock, 394 sizeof(clock))) <= 0) { 395 device_printf(dev, "missing clock-frequency " 396 "attribute in FDT\n"); 397 return (ENXIO); 398 } 399 sc->clkfreq = clock; 400 } 401 } 402 403 tmrtype = ofw_bus_search_compatible(dev, compat_data)->ocd_data; 404 tc_err = ENXIO; 405 et_err = ENXIO; 406 407 /* 408 * If we're handling the global timer and it is fixed-frequency, set it 409 * up to use as a timecounter. If it's variable frequency it won't work 410 * as a timecounter. We also can't use it for DELAY(), so hopefully the 411 * platform provides its own implementation. If it doesn't, ours will 412 * get used, but since the frequency isn't set, it will only use the 413 * bogus loop counter. 414 */ 415 if (tmrtype & TMR_GBL) { 416 if (!arm_tmr_freq_varies) 417 tc_err = attach_tc(sc); 418 else if (bootverbose) 419 device_printf(sc->dev, 420 "not using variable-frequency device as timecounter\n"); 421 sc->memrid++; 422 sc->irqrid++; 423 } 424 425 /* If we are handling the private timer, set it up as an eventtimer. */ 426 if (tmrtype & TMR_PRV) { 427 et_err = attach_et(sc); 428 } 429 430 /* 431 * If we didn't successfully set up a timecounter or eventtimer then we 432 * didn't actually attach at all, return error. 433 */ 434 if (tc_err != 0 && et_err != 0) { 435 return (ENXIO); 436 } 437 438 #ifdef PLATFORM 439 /* 440 * We can register as the DELAY() implementation only if we successfully 441 * set up the global timer. 442 */ 443 if (tc_err == 0) 444 arm_set_delay(arm_tmr_delay, sc); 445 #endif 446 447 return (0); 448 } 449 450 static device_method_t arm_tmr_methods[] = { 451 DEVMETHOD(device_probe, arm_tmr_probe), 452 DEVMETHOD(device_attach, arm_tmr_attach), 453 { 0, 0 } 454 }; 455 456 static driver_t arm_tmr_driver = { 457 "mp_tmr", 458 arm_tmr_methods, 459 sizeof(struct arm_tmr_softc), 460 }; 461 462 EARLY_DRIVER_MODULE(mp_tmr, simplebus, arm_tmr_driver, 0, 0, 463 BUS_PASS_TIMER + BUS_PASS_ORDER_MIDDLE); 464 EARLY_DRIVER_MODULE(mp_tmr, ofwbus, arm_tmr_driver, 0, 0, 465 BUS_PASS_TIMER + BUS_PASS_ORDER_MIDDLE); 466 467 /* 468 * Handle a change in clock frequency. The mpcore timer runs at half the CPU 469 * frequency. When the CPU frequency changes due to power-saving or thermal 470 * management, the platform-specific code that causes the frequency change calls 471 * this routine to inform the clock driver, and we in turn inform the event 472 * timer system, which actually updates the value in et->frequency for us and 473 * reschedules the current event(s) in a way that's atomic with respect to 474 * start/stop/intr code that may be running on various CPUs at the time of the 475 * call. 476 * 477 * This routine can also be called by a platform's early init code. If the 478 * value passed is ARM_TMR_FREQUENCY_VARIES, that will cause the attach() code 479 * to register as an eventtimer, but not a timecounter. If the value passed in 480 * is any other non-zero value it is used as the fixed frequency for the timer. 481 */ 482 void 483 arm_tmr_change_frequency(uint64_t newfreq) 484 { 485 486 if (newfreq == ARM_TMR_FREQUENCY_VARIES) { 487 arm_tmr_freq_varies = true; 488 return; 489 } 490 491 arm_tmr_freq = newfreq; 492 if (arm_tmr_et != NULL) 493 et_change_frequency(arm_tmr_et, newfreq); 494 } 495 496 static void 497 arm_tmr_delay(int usec, void *arg) 498 { 499 struct arm_tmr_softc *sc = arg; 500 int32_t counts_per_usec; 501 int32_t counts; 502 uint32_t first, last; 503 504 /* Get the number of times to count */ 505 counts_per_usec = ((arm_tmr_timecount.tc_frequency / 1000000) + 1); 506 507 /* 508 * Clamp the timeout at a maximum value (about 32 seconds with 509 * a 66MHz clock). *Nobody* should be delay()ing for anywhere 510 * near that length of time and if they are, they should be hung 511 * out to dry. 512 */ 513 if (usec >= (0x80000000U / counts_per_usec)) 514 counts = (0x80000000U / counts_per_usec) - 1; 515 else 516 counts = usec * counts_per_usec; 517 518 first = tmr_gbl_read_4(sc, GBL_TIMER_COUNT_LOW); 519 520 while (counts > 0) { 521 last = tmr_gbl_read_4(sc, GBL_TIMER_COUNT_LOW); 522 counts -= (int32_t)(last - first); 523 first = last; 524 } 525 } 526 527 #ifndef PLATFORM 528 /** 529 * DELAY - Delay for at least usec microseconds. 530 * @usec: number of microseconds to delay by 531 * 532 * This function is called all over the kernel and is suppose to provide a 533 * consistent delay. This function may also be called before the console 534 * is setup so no printf's can be called here. 535 * 536 * RETURNS: 537 * nothing 538 */ 539 void 540 DELAY(int usec) 541 { 542 struct arm_tmr_softc *sc; 543 int32_t counts; 544 545 TSENTER(); 546 /* Check the timers are setup, if not just use a for loop for the meantime */ 547 if (arm_tmr_tc == NULL || arm_tmr_timecount.tc_frequency == 0) { 548 for (; usec > 0; usec--) 549 for (counts = 200; counts > 0; counts--) 550 cpufunc_nullop(); /* Prevent gcc from optimizing 551 * out the loop 552 */ 553 } else { 554 sc = arm_tmr_tc->tc_priv; 555 arm_tmr_delay(usec, sc); 556 } 557 TSEXIT(); 558 } 559 #endif 560