xref: /freebsd/sys/arm/conf/ZEDBOARD (revision 10ff414c) 
1#
2# ZEDBOARD -- Custom configuration for the Xilinx Zynq-7000 based
3#             ZedBoard (www.zedboard.org) and similar Zynq boards.
4#
5# For more information on this file, please read the config(5) manual page,
6# and/or the handbook section on Kernel Configuration Files:
7#
8#    https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config
9#
10# The handbook is also available locally in /usr/share/doc/handbook
11# if you've installed the doc distribution, otherwise always see the
12# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the
13# latest information.
14#
15# An exhaustive list of options and more detailed explanations of the
16# device lines is also present in the ../../conf/NOTES and NOTES files.
17# If you are in doubt as to the purpose or necessity of a line, check first
18# in NOTES.
19#
20# $FreeBSD$
21
22ident		ZEDBOARD
23
24include 	"std.armv7"
25include 	"../xilinx/std.zynq7"
26
27makeoptions	MODULES_EXTRA="dtb/zynq"
28
29options 	SCHED_ULE		# ULE scheduler
30options 	PLATFORM		# Platform based SoC
31#options 	NFSSD			# Network Filesystem Server
32options 	SMP			# Enable multiple cores
33
34# NFS root from boopt/dhcp
35#options 	BOOTP
36#options 	BOOTP_NFSROOT
37#options 	BOOTP_COMPAT
38#options 	BOOTP_NFSV3
39
40options 	ROOTDEVNAME=\"ufs:mmcsd0s2a\"
41
42# Interrupt controller
43device		gic
44
45# Cache controller
46device		pl310			# PL310 L2 cache controller
47# ARM MPCore timer
48device		mpcore_timer
49
50device		loop
51device		ether
52device		cgem			# Cadence GEM Gigabit Ethernet device
53device		mii
54device		e1000phy
55device		rgephy			# Zybo uses Realtek RTL8211E
56device		pty
57device		uart
58device		gpio
59
60device		spibus
61device		spigen
62device		mx25l
63device		zy7_qspi		# Xilinx Zynq QSPI controller
64device		zy7_spi			# Xilinx Zynq SPI controller
65
66device		md
67device		mmc			# mmc/sd bus
68device		mmcsd			# mmc/sd flash cards
69device		sdhci			# generic sdhci
70device		bpf			# Berkeley packet filter
71
72# USB support
73device		usb
74device		ehci
75device		umass
76device		scbus			# SCSI bus (required for ATA/SCSI)
77device		da			# Direct Access (disks)
78device		axe			# USB-Ethernet
79
80
81# Flattened Device Tree
82options 	FDT			# Configure using FDT/DTB data
83#options 	FDT_DTB_STATIC
84#makeoptions	FDT_DTS_FILE=zedboard.dts
85
86