1 /*- 2 * Copyright (C) 2008-2009 Semihalf, Michal Hajduk 3 * Copyright (c) 2012, 2013 The FreeBSD Foundation 4 * Copyright (c) 2015 Ian Lepore <ian@FreeBSD.org> 5 * All rights reserved. 6 * 7 * Portions of this software were developed by Oleksandr Rybalko 8 * under sponsorship from the FreeBSD Foundation. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE 23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 */ 31 32 /* 33 * I2C driver for Freescale i.MX hardware. 34 * 35 * Note that the hardware is capable of running as both a master and a slave. 36 * This driver currently implements only master-mode operations. 37 * 38 * This driver supports multi-master i2c buses, by detecting bus arbitration 39 * loss and returning IIC_EBUSBSY status. Notably, it does not do any kind of 40 * retries if some other master jumps onto the bus and interrupts one of our 41 * transfer cycles resulting in arbitration loss in mid-transfer. The caller 42 * must handle retries in a way that makes sense for the slave being addressed. 43 */ 44 45 #include <sys/param.h> 46 #include <sys/systm.h> 47 #include <sys/bus.h> 48 #include <sys/gpio.h> 49 #include <sys/kernel.h> 50 #include <sys/limits.h> 51 #include <sys/module.h> 52 #include <sys/resource.h> 53 #include <sys/sysctl.h> 54 55 #include <machine/bus.h> 56 #include <machine/resource.h> 57 #include <sys/rman.h> 58 59 #include <arm/freescale/imx/imx_ccmvar.h> 60 61 #include <dev/iicbus/iiconf.h> 62 #include <dev/iicbus/iicbus.h> 63 #include <dev/iicbus/iic_recover_bus.h> 64 #include "iicbus_if.h" 65 66 #include <dev/ofw/openfirm.h> 67 #include <dev/ofw/ofw_bus.h> 68 #include <dev/ofw/ofw_bus_subr.h> 69 70 #include <dev/fdt/fdt_pinctrl.h> 71 #include <dev/gpio/gpiobusvar.h> 72 73 #if defined(__aarch64__) 74 #define IMX_ENABLE_CLOCKS 75 #endif 76 77 #ifdef IMX_ENABLE_CLOCKS 78 #include <dev/clk/clk.h> 79 #endif 80 81 #define I2C_ADDR_REG 0x00 /* I2C slave address register */ 82 #define I2C_FDR_REG 0x04 /* I2C frequency divider register */ 83 #define I2C_CONTROL_REG 0x08 /* I2C control register */ 84 #define I2C_STATUS_REG 0x0C /* I2C status register */ 85 #define I2C_DATA_REG 0x10 /* I2C data register */ 86 #define I2C_DFSRR_REG 0x14 /* I2C Digital Filter Sampling rate */ 87 88 #define I2CCR_MEN (1 << 7) /* Module enable */ 89 #define I2CCR_MSTA (1 << 5) /* Master/slave mode */ 90 #define I2CCR_MTX (1 << 4) /* Transmit/receive mode */ 91 #define I2CCR_TXAK (1 << 3) /* Transfer acknowledge */ 92 #define I2CCR_RSTA (1 << 2) /* Repeated START */ 93 94 #define I2CSR_MCF (1 << 7) /* Data transfer */ 95 #define I2CSR_MASS (1 << 6) /* Addressed as a slave */ 96 #define I2CSR_MBB (1 << 5) /* Bus busy */ 97 #define I2CSR_MAL (1 << 4) /* Arbitration lost */ 98 #define I2CSR_SRW (1 << 2) /* Slave read/write */ 99 #define I2CSR_MIF (1 << 1) /* Module interrupt */ 100 #define I2CSR_RXAK (1 << 0) /* Received acknowledge */ 101 102 #define I2C_BAUD_RATE_FAST 0x31 103 #define I2C_BAUD_RATE_DEF 0x3F 104 #define I2C_DFSSR_DIV 0x10 105 106 /* 107 * A table of available divisors and the associated coded values to put in the 108 * FDR register to achieve that divisor.. There is no algorithmic relationship I 109 * can see between divisors and the codes that go into the register. The table 110 * begins and ends with entries that handle insane configuration values. 111 */ 112 struct clkdiv { 113 u_int divisor; 114 u_int regcode; 115 }; 116 static struct clkdiv clkdiv_table[] = { 117 { 0, 0x20 }, { 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, 118 { 28, 0x23 }, { 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, 119 { 40, 0x26 }, { 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, 120 { 52, 0x05 }, { 56, 0x29 }, { 60, 0x06 }, { 64, 0x2a }, 121 { 72, 0x2b }, { 80, 0x2c }, { 88, 0x09 }, { 96, 0x2d }, 122 { 104, 0x0a }, { 112, 0x2e }, { 128, 0x2f }, { 144, 0x0c }, 123 { 160, 0x30 }, { 192, 0x31 }, { 224, 0x32 }, { 240, 0x0f }, 124 { 256, 0x33 }, { 288, 0x10 }, { 320, 0x34 }, { 384, 0x35 }, 125 { 448, 0x36 }, { 480, 0x13 }, { 512, 0x37 }, { 576, 0x14 }, 126 { 640, 0x38 }, { 768, 0x39 }, { 896, 0x3a }, { 960, 0x17 }, 127 { 1024, 0x3b }, { 1152, 0x18 }, { 1280, 0x3c }, { 1536, 0x3d }, 128 { 1792, 0x3e }, { 1920, 0x1b }, { 2048, 0x3f }, { 2304, 0x1c }, 129 { 2560, 0x1d }, { 3072, 0x1e }, { 3840, 0x1f }, {UINT_MAX, 0x1f} 130 }; 131 132 static struct ofw_compat_data compat_data[] = { 133 {"fsl,imx21-i2c", 1}, 134 {"fsl,imx6q-i2c", 1}, 135 {"fsl,imx-i2c", 1}, 136 {NULL, 0} 137 }; 138 139 struct i2c_softc { 140 device_t dev; 141 device_t iicbus; 142 struct resource *res; 143 int rid; 144 sbintime_t byte_time_sbt; 145 int rb_pinctl_idx; 146 gpio_pin_t rb_sclpin; 147 gpio_pin_t rb_sdapin; 148 u_int debug; 149 u_int slave; 150 #ifdef IMX_ENABLE_CLOCKS 151 clk_t ipgclk; 152 #endif 153 }; 154 155 #define DEVICE_DEBUGF(sc, lvl, fmt, args...) \ 156 if ((lvl) <= (sc)->debug) \ 157 device_printf((sc)->dev, fmt, ##args) 158 159 #define DEBUGF(sc, lvl, fmt, args...) \ 160 if ((lvl) <= (sc)->debug) \ 161 printf(fmt, ##args) 162 163 static phandle_t i2c_get_node(device_t, device_t); 164 static int i2c_probe(device_t); 165 static int i2c_attach(device_t); 166 static int i2c_detach(device_t); 167 168 static int i2c_repeated_start(device_t, u_char, int); 169 static int i2c_start(device_t, u_char, int); 170 static int i2c_stop(device_t); 171 static int i2c_reset(device_t, u_char, u_char, u_char *); 172 static int i2c_read(device_t, char *, int, int *, int, int); 173 static int i2c_write(device_t, const char *, int, int *, int); 174 175 static device_method_t i2c_methods[] = { 176 DEVMETHOD(device_probe, i2c_probe), 177 DEVMETHOD(device_attach, i2c_attach), 178 DEVMETHOD(device_detach, i2c_detach), 179 180 /* OFW methods */ 181 DEVMETHOD(ofw_bus_get_node, i2c_get_node), 182 183 DEVMETHOD(iicbus_callback, iicbus_null_callback), 184 DEVMETHOD(iicbus_repeated_start, i2c_repeated_start), 185 DEVMETHOD(iicbus_start, i2c_start), 186 DEVMETHOD(iicbus_stop, i2c_stop), 187 DEVMETHOD(iicbus_reset, i2c_reset), 188 DEVMETHOD(iicbus_read, i2c_read), 189 DEVMETHOD(iicbus_write, i2c_write), 190 DEVMETHOD(iicbus_transfer, iicbus_transfer_gen), 191 192 DEVMETHOD_END 193 }; 194 195 static driver_t i2c_driver = { 196 "imx_i2c", 197 i2c_methods, 198 sizeof(struct i2c_softc), 199 }; 200 201 DRIVER_MODULE(imx_i2c, simplebus, i2c_driver, 0, 0); 202 DRIVER_MODULE(ofw_iicbus, imx_i2c, ofw_iicbus_driver, 0, 0); 203 MODULE_DEPEND(imx_i2c, iicbus, 1, 1, 1); 204 SIMPLEBUS_PNP_INFO(compat_data); 205 206 static phandle_t 207 i2c_get_node(device_t bus, device_t dev) 208 { 209 /* 210 * Share controller node with iicbus device 211 */ 212 return ofw_bus_get_node(bus); 213 } 214 215 static __inline void 216 i2c_write_reg(struct i2c_softc *sc, bus_size_t off, uint8_t val) 217 { 218 219 bus_write_1(sc->res, off, val); 220 } 221 222 static __inline uint8_t 223 i2c_read_reg(struct i2c_softc *sc, bus_size_t off) 224 { 225 226 return (bus_read_1(sc->res, off)); 227 } 228 229 static __inline void 230 i2c_flag_set(struct i2c_softc *sc, bus_size_t off, uint8_t mask) 231 { 232 uint8_t status; 233 234 status = i2c_read_reg(sc, off); 235 status |= mask; 236 i2c_write_reg(sc, off, status); 237 } 238 239 /* Wait for bus to become busy or not-busy. */ 240 static int 241 wait_for_busbusy(struct i2c_softc *sc, int wantbusy) 242 { 243 int retry, srb; 244 245 retry = 1000; 246 while (retry --) { 247 srb = i2c_read_reg(sc, I2C_STATUS_REG) & I2CSR_MBB; 248 if ((srb && wantbusy) || (!srb && !wantbusy)) 249 return (IIC_NOERR); 250 DELAY(1); 251 } 252 return (IIC_ETIMEOUT); 253 } 254 255 /* Wait for transfer to complete, optionally check RXAK. */ 256 static int 257 wait_for_xfer(struct i2c_softc *sc, int checkack) 258 { 259 int retry, sr; 260 261 /* 262 * Sleep for about the time it takes to transfer a byte (with precision 263 * set to tolerate 5% oversleep). We calculate the approximate byte 264 * transfer time when we set the bus speed divisor. Slaves are allowed 265 * to do clock-stretching so the actual transfer time can be larger, but 266 * this gets the bulk of the waiting out of the way without tying up the 267 * processor the whole time. 268 */ 269 pause_sbt("imxi2c", sc->byte_time_sbt, sc->byte_time_sbt / 20, 0); 270 271 retry = 10000; 272 while (retry --) { 273 sr = i2c_read_reg(sc, I2C_STATUS_REG); 274 if (sr & I2CSR_MIF) { 275 if (sr & I2CSR_MAL) 276 return (IIC_EBUSERR); 277 else if (checkack && (sr & I2CSR_RXAK)) 278 return (IIC_ENOACK); 279 else 280 return (IIC_NOERR); 281 } 282 DELAY(1); 283 } 284 return (IIC_ETIMEOUT); 285 } 286 287 /* 288 * Implement the error handling shown in the state diagram of the imx6 reference 289 * manual. If there was an error, then: 290 * - Clear master mode (MSTA and MTX). 291 * - Wait for the bus to become free or for a timeout to happen. 292 * - Disable the controller. 293 */ 294 static int 295 i2c_error_handler(struct i2c_softc *sc, int error) 296 { 297 298 if (error != 0) { 299 i2c_write_reg(sc, I2C_STATUS_REG, 0); 300 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN); 301 wait_for_busbusy(sc, false); 302 i2c_write_reg(sc, I2C_CONTROL_REG, 0); 303 } 304 return (error); 305 } 306 307 static int 308 i2c_recover_getsda(void *ctx) 309 { 310 bool active; 311 312 gpio_pin_is_active(((struct i2c_softc *)ctx)->rb_sdapin, &active); 313 return (active); 314 } 315 316 static void 317 i2c_recover_setsda(void *ctx, int value) 318 { 319 320 gpio_pin_set_active(((struct i2c_softc *)ctx)->rb_sdapin, value); 321 } 322 323 static int 324 i2c_recover_getscl(void *ctx) 325 { 326 bool active; 327 328 gpio_pin_is_active(((struct i2c_softc *)ctx)->rb_sclpin, &active); 329 return (active); 330 331 } 332 333 static void 334 i2c_recover_setscl(void *ctx, int value) 335 { 336 337 gpio_pin_set_active(((struct i2c_softc *)ctx)->rb_sclpin, value); 338 } 339 340 static int 341 i2c_recover_bus(struct i2c_softc *sc) 342 { 343 struct iicrb_pin_access pins; 344 int err; 345 346 /* 347 * If we have gpio pinmux config, reconfigure the pins to gpio mode, 348 * invoke iic_recover_bus which checks for a hung bus and bitbangs a 349 * recovery sequence if necessary, then configure the pins back to i2c 350 * mode (idx 0). 351 */ 352 if (sc->rb_pinctl_idx == 0) 353 return (0); 354 355 fdt_pinctrl_configure(sc->dev, sc->rb_pinctl_idx); 356 357 pins.ctx = sc; 358 pins.getsda = i2c_recover_getsda; 359 pins.setsda = i2c_recover_setsda; 360 pins.getscl = i2c_recover_getscl; 361 pins.setscl = i2c_recover_setscl; 362 err = iic_recover_bus(&pins); 363 364 fdt_pinctrl_configure(sc->dev, 0); 365 366 return (err); 367 } 368 369 static int 370 i2c_probe(device_t dev) 371 { 372 373 if (!ofw_bus_status_okay(dev)) 374 return (ENXIO); 375 376 if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0) 377 return (ENXIO); 378 379 device_set_desc(dev, "Freescale i.MX I2C"); 380 381 return (BUS_PROBE_DEFAULT); 382 } 383 384 static int 385 i2c_attach(device_t dev) 386 { 387 char wrkstr[16]; 388 struct i2c_softc *sc; 389 phandle_t node; 390 int err, cfgidx; 391 392 sc = device_get_softc(dev); 393 sc->dev = dev; 394 sc->rid = 0; 395 396 #ifdef IMX_ENABLE_CLOCKS 397 if (clk_get_by_ofw_index(sc->dev, 0, 0, &sc->ipgclk) != 0) { 398 device_printf(dev, "could not get ipg clock"); 399 return (ENOENT); 400 } 401 402 err = clk_enable(sc->ipgclk); 403 if (err != 0) { 404 device_printf(sc->dev, "could not enable ipg clock\n"); 405 return (err); 406 } 407 #endif 408 409 sc->res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->rid, 410 RF_ACTIVE); 411 if (sc->res == NULL) { 412 device_printf(dev, "could not allocate resources"); 413 return (ENXIO); 414 } 415 416 sc->iicbus = device_add_child(dev, "iicbus", -1); 417 if (sc->iicbus == NULL) { 418 device_printf(dev, "could not add iicbus child"); 419 return (ENXIO); 420 } 421 422 /* Set up debug-enable sysctl. */ 423 SYSCTL_ADD_INT(device_get_sysctl_ctx(sc->dev), 424 SYSCTL_CHILDREN(device_get_sysctl_tree(sc->dev)), 425 OID_AUTO, "debug", CTLFLAG_RWTUN, &sc->debug, 0, 426 "Enable debug; 1=reads/writes, 2=add starts/stops"); 427 428 /* 429 * Set up for bus recovery using gpio pins, if the pinctrl and gpio 430 * properties are present. This is optional. If all the config data is 431 * not in place, we just don't do gpio bitbang bus recovery. 432 */ 433 node = ofw_bus_get_node(sc->dev); 434 435 err = gpio_pin_get_by_ofw_property(dev, node, "scl-gpios", 436 &sc->rb_sclpin); 437 if (err != 0) 438 goto no_recovery; 439 err = gpio_pin_get_by_ofw_property(dev, node, "sda-gpios", 440 &sc->rb_sdapin); 441 if (err != 0) 442 goto no_recovery; 443 444 /* 445 * Preset the gpio pins to output high (idle bus state). The signal 446 * won't actually appear on the pins until the bus recovery code changes 447 * the pinmux config from i2c to gpio. 448 */ 449 gpio_pin_setflags(sc->rb_sclpin, GPIO_PIN_OUTPUT); 450 gpio_pin_setflags(sc->rb_sdapin, GPIO_PIN_OUTPUT); 451 gpio_pin_set_active(sc->rb_sclpin, true); 452 gpio_pin_set_active(sc->rb_sdapin, true); 453 454 /* 455 * Obtain the index of pinctrl node for bus recovery using gpio pins, 456 * then confirm that pinctrl properties exist for that index and for the 457 * default pinctrl-0. If sc->rb_pinctl_idx is non-zero, the reset code 458 * will also do a bus recovery, so setting this value must be last. 459 */ 460 err = ofw_bus_find_string_index(node, "pinctrl-names", "gpio", &cfgidx); 461 if (err == 0) { 462 snprintf(wrkstr, sizeof(wrkstr), "pinctrl-%d", cfgidx); 463 if (OF_hasprop(node, "pinctrl-0") && OF_hasprop(node, wrkstr)) 464 sc->rb_pinctl_idx = cfgidx; 465 } 466 467 no_recovery: 468 469 /* We don't do a hardware reset here because iicbus_attach() does it. */ 470 471 /* Probe and attach the iicbus when interrupts are available. */ 472 return (bus_delayed_attach_children(dev)); 473 } 474 475 static int 476 i2c_detach(device_t dev) 477 { 478 struct i2c_softc *sc; 479 int error; 480 481 sc = device_get_softc(dev); 482 483 #ifdef IMX_ENABLE_CLOCKS 484 error = clk_disable(sc->ipgclk); 485 if (error != 0) { 486 device_printf(sc->dev, "could not disable ipg clock\n"); 487 return (error); 488 } 489 #endif 490 491 if ((error = bus_generic_detach(sc->dev)) != 0) { 492 device_printf(sc->dev, "cannot detach child devices\n"); 493 return (error); 494 } 495 496 if (sc->iicbus != NULL) 497 device_delete_child(dev, sc->iicbus); 498 499 /* Release bus-recover pins; gpio_pin_release() handles NULL args. */ 500 gpio_pin_release(sc->rb_sclpin); 501 gpio_pin_release(sc->rb_sdapin); 502 503 if (sc->res != NULL) 504 bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->res); 505 506 return (0); 507 } 508 509 static int 510 i2c_repeated_start(device_t dev, u_char slave, int timeout) 511 { 512 struct i2c_softc *sc; 513 int error; 514 515 sc = device_get_softc(dev); 516 517 if ((i2c_read_reg(sc, I2C_STATUS_REG) & I2CSR_MBB) == 0) { 518 return (IIC_EBUSERR); 519 } 520 521 /* 522 * Set repeated start condition, delay (per reference manual, min 156nS) 523 * before writing slave address, wait for ack after write. 524 */ 525 i2c_flag_set(sc, I2C_CONTROL_REG, I2CCR_RSTA); 526 DELAY(1); 527 i2c_write_reg(sc, I2C_STATUS_REG, 0x0); 528 i2c_write_reg(sc, I2C_DATA_REG, slave); 529 sc->slave = slave; 530 DEVICE_DEBUGF(sc, 2, "rstart 0x%02x\n", sc->slave); 531 error = wait_for_xfer(sc, true); 532 return (i2c_error_handler(sc, error)); 533 } 534 535 static int 536 i2c_start_ll(device_t dev, u_char slave, int timeout) 537 { 538 struct i2c_softc *sc; 539 int error; 540 541 sc = device_get_softc(dev); 542 543 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN); 544 DELAY(10); /* Delay for controller to sample bus state. */ 545 if (i2c_read_reg(sc, I2C_STATUS_REG) & I2CSR_MBB) { 546 return (i2c_error_handler(sc, IIC_EBUSERR)); 547 } 548 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN | I2CCR_MSTA | I2CCR_MTX); 549 if ((error = wait_for_busbusy(sc, true)) != IIC_NOERR) 550 return (i2c_error_handler(sc, error)); 551 i2c_write_reg(sc, I2C_STATUS_REG, 0); 552 i2c_write_reg(sc, I2C_DATA_REG, slave); 553 sc->slave = slave; 554 DEVICE_DEBUGF(sc, 2, "start 0x%02x\n", sc->slave); 555 error = wait_for_xfer(sc, true); 556 return (i2c_error_handler(sc, error)); 557 } 558 559 static int 560 i2c_start(device_t dev, u_char slave, int timeout) 561 { 562 struct i2c_softc *sc; 563 int error; 564 565 sc = device_get_softc(dev); 566 567 /* 568 * Invoke the low-level code to put the bus into master mode and address 569 * the given slave. If that fails, idle the controller and attempt a 570 * bus recovery, and then try again one time. Signaling a start and 571 * addressing the slave is the only operation that a low-level driver 572 * can safely retry without any help from the upper layers that know 573 * more about the slave device. 574 */ 575 if ((error = i2c_start_ll(dev, slave, timeout)) != 0) { 576 i2c_write_reg(sc, I2C_CONTROL_REG, 0x0); 577 if ((error = i2c_recover_bus(sc)) != 0) 578 return (error); 579 error = i2c_start_ll(dev, slave, timeout); 580 } 581 return (error); 582 } 583 584 static int 585 i2c_stop(device_t dev) 586 { 587 struct i2c_softc *sc; 588 589 sc = device_get_softc(dev); 590 591 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN); 592 wait_for_busbusy(sc, false); 593 i2c_write_reg(sc, I2C_CONTROL_REG, 0); 594 DEVICE_DEBUGF(sc, 2, "stop 0x%02x\n", sc->slave); 595 return (IIC_NOERR); 596 } 597 598 static int 599 i2c_reset(device_t dev, u_char speed, u_char addr, u_char *oldadr) 600 { 601 struct i2c_softc *sc; 602 u_int busfreq, div, i, ipgfreq; 603 #ifdef IMX_ENABLE_CLOCKS 604 int err; 605 uint64_t freq; 606 #endif 607 608 sc = device_get_softc(dev); 609 610 DEVICE_DEBUGF(sc, 1, "reset\n"); 611 612 /* 613 * Look up the divisor that gives the nearest speed that doesn't exceed 614 * the configured value for the bus. 615 */ 616 #ifdef IMX_ENABLE_CLOCKS 617 err = clk_get_freq(sc->ipgclk, &freq); 618 if (err != 0) { 619 device_printf(sc->dev, "cannot get frequency\n"); 620 return (err); 621 } 622 ipgfreq = (int32_t)freq; 623 #else 624 ipgfreq = imx_ccm_ipg_hz(); 625 #endif 626 busfreq = IICBUS_GET_FREQUENCY(sc->iicbus, speed); 627 div = howmany(ipgfreq, busfreq); 628 for (i = 0; i < nitems(clkdiv_table); i++) { 629 if (clkdiv_table[i].divisor >= div) 630 break; 631 } 632 633 /* 634 * Calculate roughly how long it will take to transfer a byte (which 635 * requires 9 clock cycles) at the new bus speed. This value is used to 636 * pause() while waiting for transfer-complete. With a 66MHz IPG clock 637 * and the actual i2c bus speeds that leads to, for nominal 100KHz and 638 * 400KHz bus speeds the transfer times are roughly 104uS and 22uS. 639 */ 640 busfreq = ipgfreq / clkdiv_table[i].divisor; 641 sc->byte_time_sbt = SBT_1US * (9000000 / busfreq); 642 643 /* 644 * Disable the controller (do the reset), and set the new clock divisor. 645 */ 646 i2c_write_reg(sc, I2C_STATUS_REG, 0x0); 647 i2c_write_reg(sc, I2C_CONTROL_REG, 0x0); 648 i2c_write_reg(sc, I2C_FDR_REG, (uint8_t)clkdiv_table[i].regcode); 649 650 /* 651 * Now that the controller is idle, perform bus recovery. If the bus 652 * isn't hung, this a fairly fast no-op. 653 */ 654 return (i2c_recover_bus(sc)); 655 } 656 657 static int 658 i2c_read(device_t dev, char *buf, int len, int *read, int last, int delay) 659 { 660 struct i2c_softc *sc; 661 int error, reg; 662 663 sc = device_get_softc(dev); 664 *read = 0; 665 666 DEVICE_DEBUGF(sc, 1, "read 0x%02x len %d: ", sc->slave, len); 667 if (len) { 668 if (len == 1) 669 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN | 670 I2CCR_MSTA | I2CCR_TXAK); 671 else 672 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN | 673 I2CCR_MSTA); 674 /* Dummy read to prime the receiver. */ 675 i2c_write_reg(sc, I2C_STATUS_REG, 0x0); 676 i2c_read_reg(sc, I2C_DATA_REG); 677 } 678 679 error = 0; 680 *read = 0; 681 while (*read < len) { 682 if ((error = wait_for_xfer(sc, false)) != IIC_NOERR) 683 break; 684 i2c_write_reg(sc, I2C_STATUS_REG, 0x0); 685 if (last) { 686 if (*read == len - 2) { 687 /* NO ACK on last byte */ 688 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN | 689 I2CCR_MSTA | I2CCR_TXAK); 690 } else if (*read == len - 1) { 691 /* Transfer done, signal stop. */ 692 i2c_write_reg(sc, I2C_CONTROL_REG, I2CCR_MEN | 693 I2CCR_TXAK); 694 wait_for_busbusy(sc, false); 695 } 696 } 697 reg = i2c_read_reg(sc, I2C_DATA_REG); 698 DEBUGF(sc, 1, "0x%02x ", reg); 699 *buf++ = reg; 700 (*read)++; 701 } 702 DEBUGF(sc, 1, "\n"); 703 704 return (i2c_error_handler(sc, error)); 705 } 706 707 static int 708 i2c_write(device_t dev, const char *buf, int len, int *sent, int timeout) 709 { 710 struct i2c_softc *sc; 711 int error; 712 713 sc = device_get_softc(dev); 714 715 error = 0; 716 *sent = 0; 717 DEVICE_DEBUGF(sc, 1, "write 0x%02x len %d: ", sc->slave, len); 718 while (*sent < len) { 719 DEBUGF(sc, 1, "0x%02x ", *buf); 720 i2c_write_reg(sc, I2C_STATUS_REG, 0x0); 721 i2c_write_reg(sc, I2C_DATA_REG, *buf++); 722 if ((error = wait_for_xfer(sc, true)) != IIC_NOERR) 723 break; 724 (*sent)++; 725 } 726 DEBUGF(sc, 1, "\n"); 727 return (i2c_error_handler(sc, error)); 728 } 729