xref: /freebsd/sys/arm/freescale/vybrid/vf_edma.c (revision 4b9d6057)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) 2014 Ruslan Bukin <br@bsdpad.com>
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  */
28 
29 /*
30  * Vybrid Family Enhanced Direct Memory Access Controller (eDMA)
31  * Chapter 21, Vybrid Reference Manual, Rev. 5, 07/2013
32  */
33 
34 #include <sys/param.h>
35 #include <sys/systm.h>
36 #include <sys/bus.h>
37 #include <sys/kernel.h>
38 #include <sys/module.h>
39 #include <sys/malloc.h>
40 #include <sys/rman.h>
41 #include <sys/timeet.h>
42 #include <sys/timetc.h>
43 #include <sys/watchdog.h>
44 
45 #include <dev/ofw/openfirm.h>
46 #include <dev/ofw/ofw_bus.h>
47 #include <dev/ofw/ofw_bus_subr.h>
48 
49 #include <machine/bus.h>
50 #include <machine/cpu.h>
51 #include <machine/intr.h>
52 
53 #include <arm/freescale/vybrid/vf_edma.h>
54 #include <arm/freescale/vybrid/vf_dmamux.h>
55 #include <arm/freescale/vybrid/vf_common.h>
56 
57 struct edma_channel {
58 	uint32_t	enabled;
59 	uint32_t	mux_num;
60 	uint32_t	mux_src;
61 	uint32_t	mux_chn;
62 	uint32_t	(*ih) (void *, int);
63 	void		*ih_user;
64 };
65 
66 static struct edma_channel edma_map[EDMA_NUM_CHANNELS];
67 
68 static struct resource_spec edma_spec[] = {
69 	{ SYS_RES_MEMORY,	0,	RF_ACTIVE },
70 	{ SYS_RES_MEMORY,	1,	RF_ACTIVE }, /* TCD */
71 	{ SYS_RES_IRQ,		0,	RF_ACTIVE }, /* Transfer complete */
72 	{ SYS_RES_IRQ,		1,	RF_ACTIVE }, /* Error Interrupt */
73 	{ -1, 0 }
74 };
75 
76 static int
77 edma_probe(device_t dev)
78 {
79 
80 	if (!ofw_bus_status_okay(dev))
81 		return (ENXIO);
82 
83 	if (!ofw_bus_is_compatible(dev, "fsl,mvf600-edma"))
84 		return (ENXIO);
85 
86 	device_set_desc(dev, "Vybrid Family eDMA Controller");
87 	return (BUS_PROBE_DEFAULT);
88 }
89 
90 static void
91 edma_transfer_complete_intr(void *arg)
92 {
93 	struct edma_channel *ch;
94 	struct edma_softc *sc;
95 	int interrupts;
96 	int i;
97 
98 	sc = arg;
99 
100 	interrupts = READ4(sc, DMA_INT);
101 	WRITE1(sc, DMA_CINT, CINT_CAIR);
102 
103 	for (i = 0; i < EDMA_NUM_CHANNELS; i++) {
104 		if (interrupts & (0x1 << i)) {
105 			ch = &edma_map[i];
106 			if (ch->enabled == 1) {
107 				if (ch->ih != NULL) {
108 					ch->ih(ch->ih_user, i);
109 				}
110 			}
111 		}
112 	}
113 }
114 
115 static void
116 edma_err_intr(void *arg)
117 {
118 	struct edma_softc *sc;
119 #if 0
120 	int reg;
121 #endif
122 
123 	sc = arg;
124 
125 	/* reg = */ READ4(sc, DMA_ERR);
126 
127 #if 0
128 	device_printf(sc->dev, "DMA_ERR 0x%08x, ES 0x%08x\n",
129 	    reg, READ4(sc, DMA_ES));
130 #endif
131 
132 	WRITE1(sc, DMA_CERR, CERR_CAEI);
133 }
134 
135 static int
136 channel_free(struct edma_softc *sc, int chnum)
137 {
138 	struct edma_channel *ch;
139 
140 	ch = &edma_map[chnum];
141 	ch->enabled = 0;
142 
143 	dmamux_configure(ch->mux_num, ch->mux_src, ch->mux_chn, 0);
144 
145 	return (0);
146 }
147 
148 static int
149 channel_configure(struct edma_softc *sc, int mux_grp, int mux_src)
150 {
151 	struct edma_channel *ch;
152 	int channel_first;
153 	int mux_num;
154 	int chnum;
155 	int i;
156 
157 	if ((sc->device_id == 0 && mux_grp == 1) ||	\
158 	    (sc->device_id == 1 && mux_grp == 0)) {
159 		channel_first = NCHAN_PER_MUX;
160 		mux_num = (sc->device_id * 2) + 1;
161 	} else {
162 		channel_first = 0;
163 		mux_num = sc->device_id * 2;
164 	}
165 
166 	/* Take first unused eDMA channel */
167 	ch = NULL;
168 	for (i = channel_first; i < (channel_first + NCHAN_PER_MUX); i++) {
169 		ch = &edma_map[i];
170 		if (ch->enabled == 0) {
171 			break;
172 		}
173 		ch = NULL;
174 	}
175 
176 	if (ch == NULL) {
177 		/* Can't find free channel */
178 		return (-1);
179 	}
180 
181 	chnum = i;
182 
183 	ch->enabled = 1;
184 	ch->mux_num = mux_num;
185 	ch->mux_src = mux_src;
186 	ch->mux_chn = (chnum - channel_first);	/* 0 to 15 */
187 
188 	dmamux_configure(ch->mux_num, ch->mux_src, ch->mux_chn, 1);
189 
190 	return (chnum);
191 }
192 
193 static int
194 dma_stop(struct edma_softc *sc, int chnum)
195 {
196 	int reg;
197 
198 	reg = READ4(sc, DMA_ERQ);
199 	reg &= ~(0x1 << chnum);
200 	WRITE4(sc, DMA_ERQ, reg);
201 
202 	return (0);
203 }
204 
205 static int
206 dma_setup(struct edma_softc *sc, struct tcd_conf *tcd)
207 {
208 	struct edma_channel *ch;
209 	int chnum;
210 	int reg;
211 
212 	chnum = tcd->channel;
213 
214 	ch = &edma_map[chnum];
215 	ch->ih = tcd->ih;
216 	ch->ih_user = tcd->ih_user;
217 
218 	TCD_WRITE4(sc, DMA_TCDn_SADDR(chnum), tcd->saddr);
219 	TCD_WRITE4(sc, DMA_TCDn_DADDR(chnum), tcd->daddr);
220 
221 	reg = (tcd->smod << TCD_ATTR_SMOD_SHIFT);
222 	reg |= (tcd->dmod << TCD_ATTR_DMOD_SHIFT);
223 	reg |= (tcd->ssize << TCD_ATTR_SSIZE_SHIFT);
224 	reg |= (tcd->dsize << TCD_ATTR_DSIZE_SHIFT);
225 	TCD_WRITE2(sc, DMA_TCDn_ATTR(chnum), reg);
226 
227 	TCD_WRITE2(sc, DMA_TCDn_SOFF(chnum), tcd->soff);
228 	TCD_WRITE2(sc, DMA_TCDn_DOFF(chnum), tcd->doff);
229 	TCD_WRITE4(sc, DMA_TCDn_SLAST(chnum), tcd->slast);
230 	TCD_WRITE4(sc, DMA_TCDn_DLASTSGA(chnum), tcd->dlast_sga);
231 	TCD_WRITE4(sc, DMA_TCDn_NBYTES_MLOFFYES(chnum), tcd->nbytes);
232 
233 	reg = tcd->nmajor; /* Current Major Iteration Count */
234 	TCD_WRITE2(sc, DMA_TCDn_CITER_ELINKNO(chnum), reg);
235 	TCD_WRITE2(sc, DMA_TCDn_BITER_ELINKNO(chnum), reg);
236 
237 	reg = (TCD_CSR_INTMAJOR);
238 	if(tcd->majorelink == 1) {
239 		reg |= TCD_CSR_MAJORELINK;
240 		reg |= (tcd->majorelinkch << TCD_CSR_MAJORELINKCH_SHIFT);
241 	}
242 	TCD_WRITE2(sc, DMA_TCDn_CSR(chnum), reg);
243 
244 	/* Enable requests */
245 	reg = READ4(sc, DMA_ERQ);
246 	reg |= (0x1 << chnum);
247 	WRITE4(sc, DMA_ERQ, reg);
248 
249 	/* Enable error interrupts */
250 	reg = READ4(sc, DMA_EEI);
251 	reg |= (0x1 << chnum);
252 	WRITE4(sc, DMA_EEI, reg);
253 
254 	return (0);
255 }
256 
257 static int
258 dma_request(struct edma_softc *sc, int chnum)
259 {
260 	int reg;
261 
262 	/* Start */
263 	reg = TCD_READ2(sc, DMA_TCDn_CSR(chnum));
264 	reg |= TCD_CSR_START;
265 	TCD_WRITE2(sc, DMA_TCDn_CSR(chnum), reg);
266 
267 	return (0);
268 }
269 
270 static int
271 edma_attach(device_t dev)
272 {
273 	struct edma_softc *sc;
274 	phandle_t node;
275 	int dts_value;
276 	int len;
277 
278 	sc = device_get_softc(dev);
279 	sc->dev = dev;
280 
281 	if ((node = ofw_bus_get_node(sc->dev)) == -1)
282 		return (ENXIO);
283 
284 	if ((len = OF_getproplen(node, "device-id")) <= 0)
285 		return (ENXIO);
286 
287 	OF_getencprop(node, "device-id", &dts_value, len);
288 	sc->device_id = dts_value;
289 
290 	sc->dma_stop = dma_stop;
291 	sc->dma_setup = dma_setup;
292 	sc->dma_request = dma_request;
293 	sc->channel_configure = channel_configure;
294 	sc->channel_free = channel_free;
295 
296 	if (bus_alloc_resources(dev, edma_spec, sc->res)) {
297 		device_printf(dev, "could not allocate resources\n");
298 		return (ENXIO);
299 	}
300 
301 	/* Memory interface */
302 	sc->bst = rman_get_bustag(sc->res[0]);
303 	sc->bsh = rman_get_bushandle(sc->res[0]);
304 	sc->bst_tcd = rman_get_bustag(sc->res[1]);
305 	sc->bsh_tcd = rman_get_bushandle(sc->res[1]);
306 
307 	/* Setup interrupt handlers */
308 	if (bus_setup_intr(dev, sc->res[2], INTR_TYPE_BIO | INTR_MPSAFE,
309 		NULL, edma_transfer_complete_intr, sc, &sc->tc_ih)) {
310 		device_printf(dev, "Unable to alloc DMA intr resource.\n");
311 		return (ENXIO);
312 	}
313 
314 	if (bus_setup_intr(dev, sc->res[3], INTR_TYPE_BIO | INTR_MPSAFE,
315 		NULL, edma_err_intr, sc, &sc->err_ih)) {
316 		device_printf(dev, "Unable to alloc DMA Err intr resource.\n");
317 		return (ENXIO);
318 	}
319 
320 	return (0);
321 }
322 
323 static device_method_t edma_methods[] = {
324 	DEVMETHOD(device_probe,		edma_probe),
325 	DEVMETHOD(device_attach,	edma_attach),
326 	{ 0, 0 }
327 };
328 
329 static driver_t edma_driver = {
330 	"edma",
331 	edma_methods,
332 	sizeof(struct edma_softc),
333 };
334 
335 DRIVER_MODULE(edma, simplebus, edma_driver, 0, 0);
336