xref: /freebsd/sys/arm/mv/armada/thermal.c (revision d6b92ffa)
1 /*-
2  * Copyright (c) 2017 Semihalf.
3  * Copyright (c) 2017 Stormshield.
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25  * SUCH DAMAGE.
26  */
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
29 
30 #include <sys/param.h>
31 #include <sys/sysctl.h>
32 #include <sys/systm.h>
33 #include <sys/bus.h>
34 #include <sys/conf.h>
35 #include <sys/rman.h>
36 #include <sys/types.h>
37 #include <sys/kernel.h>
38 #include <sys/module.h>
39 #include <sys/resource.h>
40 
41 #include <machine/fdt.h>
42 
43 #include <dev/ofw/ofw_bus_subr.h>
44 
45 #define	READOUT_TO_C(temp)	((temp) / 1000)
46 
47 #define	STAT_RID		0
48 #define	CTRL_RID		1
49 
50 #define	TSEN_STAT_READOUT_VALID	0x1
51 
52 #define	A380_TSEN_CTRL_RESET	(1 << 8)
53 
54 struct armada_thermal_softc;
55 
56 typedef struct armada_thermal_data {
57 	/* Initialize the sensor */
58 	void (*tsen_init)(struct armada_thermal_softc *);
59 
60 	/* Test for a valid sensor value */
61 	boolean_t (*is_valid)(struct armada_thermal_softc *);
62 
63 	/* Formula coefficients: temp = (b + m * reg) / div */
64 	u_long coef_b;
65 	u_long coef_m;
66 	u_long coef_div;
67 
68 	boolean_t inverted;
69 
70 	/* Shift and mask to access the sensor temperature */
71 	u_int temp_shift;
72 	u_int temp_mask;
73 	u_int is_valid_shift;
74 } armada_tdata_t;
75 
76 static boolean_t armada_tsen_readout_valid(struct armada_thermal_softc *);
77 static int armada_tsen_get_temp(struct armada_thermal_softc *, u_long *);
78 static void armada380_tsen_init(struct armada_thermal_softc *);
79 static void armada_temp_update(void *);
80 
81 static const armada_tdata_t armada380_tdata = {
82 	.tsen_init = armada380_tsen_init,
83 	.is_valid = armada_tsen_readout_valid,
84 	.is_valid_shift = 10,
85 	.temp_shift = 0,
86 	.temp_mask = 0x3ff,
87 	.coef_b = 1172499100UL,
88 	.coef_m = 2000096UL,
89 	.coef_div = 4201,
90 	.inverted = TRUE,
91 };
92 
93 static int armada_thermal_probe(device_t);
94 static int armada_thermal_attach(device_t);
95 static int armada_thermal_detach(device_t);
96 
97 static device_method_t armada_thermal_methods[] = {
98 	DEVMETHOD(device_probe,		armada_thermal_probe),
99 	DEVMETHOD(device_attach,	armada_thermal_attach),
100 	DEVMETHOD(device_detach,	armada_thermal_detach),
101 
102 	DEVMETHOD_END
103 };
104 
105 struct armada_thermal_softc {
106 	device_t		dev;
107 
108 	struct resource		*stat_res;
109 	struct resource		*ctrl_res;
110 
111 	struct callout		temp_upd;
112 	struct mtx		temp_upd_mtx;
113 
114 	const armada_tdata_t	*tdata;
115 
116 	u_long			chip_temperature;
117 };
118 
119 static driver_t	armada_thermal_driver = {
120 	"armada_thermal",
121 	armada_thermal_methods,
122 	sizeof(struct armada_thermal_softc)
123 };
124 
125 static devclass_t armada_thermal_devclass;
126 
127 DRIVER_MODULE(armada_thermal, simplebus, armada_thermal_driver,
128         armada_thermal_devclass, 0, 0);
129 DRIVER_MODULE(armada_thermal, ofwbus, armada_thermal_driver,
130         armada_thermal_devclass, 0, 0);
131 
132 static int
133 armada_thermal_probe(device_t dev)
134 {
135 	struct armada_thermal_softc *sc;
136 
137 	sc = device_get_softc(dev);
138 
139 	if (!ofw_bus_status_okay(dev))
140 		return (ENXIO);
141 
142 	if (ofw_bus_is_compatible(dev, "marvell,armada380-thermal")) {
143 		device_set_desc(dev, "Armada380 Thermal Control");
144 		sc->tdata = &armada380_tdata;
145 
146 		return (BUS_PROBE_DEFAULT);
147 	}
148 
149 	return (ENXIO);
150 }
151 
152 static int
153 armada_thermal_attach(device_t dev)
154 {
155 	struct armada_thermal_softc *sc;
156 	const armada_tdata_t *tdata;
157 	struct sysctl_ctx_list *sctx;
158 	struct sysctl_oid_list *schildren;
159 	int timeout;
160 	int rid;
161 
162 	sc = device_get_softc(dev);
163 
164 	/* Allocate CTRL and STAT register spaces */
165 	rid = STAT_RID;
166 	sc->stat_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
167 	    &rid, RF_ACTIVE);
168 	if (sc->stat_res == NULL) {
169 		device_printf(dev,
170 		    "Could not allocate memory for the status register\n");
171 		return (ENXIO);
172 	}
173 
174 	rid = CTRL_RID;
175 	sc->ctrl_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
176 	    &rid, RF_ACTIVE);
177 	if (sc->ctrl_res == NULL) {
178 		device_printf(dev,
179 		    "Could not allocate memory for the control register\n");
180 		bus_release_resource(dev, SYS_RES_MEMORY,
181 		    rman_get_rid(sc->stat_res), sc->stat_res);
182 		sc->stat_res = NULL;
183 		return (ENXIO);
184 	}
185 
186 	/* Now initialize the sensor */
187 	tdata = sc->tdata;
188 	tdata->tsen_init(sc);
189 	/* Set initial temperature value */
190 	for (timeout = 1000; timeout > 0; timeout--) {
191 		if (armada_tsen_get_temp(sc, &sc->chip_temperature) == 0)
192 			break;
193 		DELAY(10);
194 	}
195 	if (timeout <= 0) {
196 		bus_release_resource(dev, SYS_RES_MEMORY,
197 		    rman_get_rid(sc->stat_res), sc->stat_res);
198 		sc->stat_res = NULL;
199 		bus_release_resource(dev, SYS_RES_MEMORY,
200 		    rman_get_rid(sc->ctrl_res), sc->ctrl_res);
201 		sc->ctrl_res = NULL;
202 		return (ENXIO);
203 	}
204 	/* Initialize mutex */
205 	mtx_init(&sc->temp_upd_mtx, "Armada Thermal", NULL, MTX_DEF);
206 	/* Set up the temperature update callout */
207 	callout_init_mtx(&sc->temp_upd, &sc->temp_upd_mtx, 0);
208 	/* Schedule callout */
209 	callout_reset(&sc->temp_upd, hz, armada_temp_update, sc);
210 
211 	sctx = device_get_sysctl_ctx(dev);
212 	schildren = SYSCTL_CHILDREN(device_get_sysctl_tree(dev));
213 	SYSCTL_ADD_LONG(sctx, schildren, OID_AUTO, "temperature",
214 	    CTLFLAG_RD, &sc->chip_temperature, "SoC temperature");
215 
216 	return (0);
217 }
218 
219 static int
220 armada_thermal_detach(device_t dev)
221 {
222 	struct armada_thermal_softc *sc;
223 
224 	sc = device_get_softc(dev);
225 
226 	if (!device_is_attached(dev))
227 		return (0);
228 
229 	callout_drain(&sc->temp_upd);
230 
231 	sc->chip_temperature = 0;
232 
233 	bus_release_resource(dev, SYS_RES_MEMORY,
234 	    rman_get_rid(sc->stat_res), sc->stat_res);
235 	sc->stat_res = NULL;
236 
237 	bus_release_resource(dev, SYS_RES_MEMORY,
238 	    rman_get_rid(sc->ctrl_res), sc->ctrl_res);
239 	sc->ctrl_res = NULL;
240 
241 	return (0);
242 }
243 
244 static boolean_t
245 armada_tsen_readout_valid(struct armada_thermal_softc *sc)
246 {
247 	const armada_tdata_t *tdata;
248 	uint32_t tsen_stat;
249 	boolean_t is_valid;
250 
251 	tdata = sc->tdata;
252 	tsen_stat = bus_read_4(sc->stat_res, 0);
253 
254 	tsen_stat >>= tdata->is_valid_shift;
255 	is_valid = ((tsen_stat & TSEN_STAT_READOUT_VALID) != 0);
256 
257 	return (is_valid);
258 }
259 
260 static int
261 armada_tsen_get_temp(struct armada_thermal_softc *sc, u_long *temp)
262 {
263 	const armada_tdata_t *tdata;
264 	uint32_t reg;
265 	u_long tmp;
266 	u_long m, b, div;
267 
268 	tdata = sc->tdata;
269 	/* Check if the readout is valid */
270 	if ((tdata->is_valid != NULL) && !tdata->is_valid(sc))
271 		return (EIO);
272 
273 	reg = bus_read_4(sc->stat_res, 0);
274 	reg = (reg >> tdata->temp_shift) & tdata->temp_mask;
275 
276 	/* Get formula coefficients */
277 	b = tdata->coef_b;
278 	m = tdata->coef_m;
279 	div = tdata->coef_div;
280 
281 	if (tdata->inverted)
282 		tmp = ((m * reg) - b) / div;
283 	else
284 		tmp = (b - (m * reg)) / div;
285 
286 	*temp = READOUT_TO_C(tmp);
287 
288 	return (0);
289 }
290 
291 static void
292 armada380_tsen_init(struct armada_thermal_softc *sc)
293 {
294 	uint32_t tsen_ctrl;
295 
296 	tsen_ctrl = bus_read_4(sc->ctrl_res, 0);
297 	if ((tsen_ctrl & A380_TSEN_CTRL_RESET) == 0) {
298 		tsen_ctrl |= A380_TSEN_CTRL_RESET;
299 		bus_write_4(sc->ctrl_res, 0, tsen_ctrl);
300 		DELAY(10000);
301 	}
302 }
303 
304 static void
305 armada_temp_update(void *arg)
306 {
307 	struct armada_thermal_softc *sc;
308 
309 	sc = arg;
310 	/* Update temperature value, keel old if the readout is not valid */
311 	(void)armada_tsen_get_temp(sc, &sc->chip_temperature);
312 
313 	callout_reset(&sc->temp_upd, hz, armada_temp_update, sc);
314 }
315