1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright 2013 Oleksandr Tymoshenko <gonzo@freebsd.org> 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include "opt_syscons.h" 33 #include <sys/param.h> 34 #include <sys/systm.h> 35 #include <sys/kernel.h> 36 #include <sys/module.h> 37 #include <sys/clock.h> 38 #include <sys/eventhandler.h> 39 #include <sys/time.h> 40 #include <sys/bus.h> 41 #include <sys/lock.h> 42 #include <sys/mutex.h> 43 #include <sys/resource.h> 44 #include <sys/rman.h> 45 #include <sys/sysctl.h> 46 #include <vm/vm.h> 47 #include <vm/pmap.h> 48 #include <sys/fbio.h> 49 #include <sys/consio.h> 50 51 #include <machine/bus.h> 52 53 #include <dev/fdt/fdt_common.h> 54 #include <dev/ofw/openfirm.h> 55 #include <dev/ofw/ofw_bus.h> 56 #include <dev/ofw/ofw_bus_subr.h> 57 58 #include <dev/videomode/videomode.h> 59 #include <dev/videomode/edidvar.h> 60 61 #include <dev/fb/fbreg.h> 62 #ifdef DEV_SC 63 #include <dev/syscons/syscons.h> 64 #else /* VT */ 65 #include <dev/vt/vt.h> 66 #endif 67 68 #include <arm/ti/ti_prcm.h> 69 #include <arm/ti/ti_scm.h> 70 71 #include "am335x_lcd.h" 72 #include "am335x_pwm.h" 73 74 #include "fb_if.h" 75 #include "hdmi_if.h" 76 77 #define LCD_PID 0x00 78 #define LCD_CTRL 0x04 79 #define CTRL_DIV_MASK 0xff 80 #define CTRL_DIV_SHIFT 8 81 #define CTRL_AUTO_UFLOW_RESTART (1 << 1) 82 #define CTRL_RASTER_MODE 1 83 #define CTRL_LIDD_MODE 0 84 #define LCD_LIDD_CTRL 0x0C 85 #define LCD_LIDD_CS0_CONF 0x10 86 #define LCD_LIDD_CS0_ADDR 0x14 87 #define LCD_LIDD_CS0_DATA 0x18 88 #define LCD_LIDD_CS1_CONF 0x1C 89 #define LCD_LIDD_CS1_ADDR 0x20 90 #define LCD_LIDD_CS1_DATA 0x24 91 #define LCD_RASTER_CTRL 0x28 92 #define RASTER_CTRL_TFT24_UNPACKED (1 << 26) 93 #define RASTER_CTRL_TFT24 (1 << 25) 94 #define RASTER_CTRL_STN565 (1 << 24) 95 #define RASTER_CTRL_TFTPMAP (1 << 23) 96 #define RASTER_CTRL_NIBMODE (1 << 22) 97 #define RASTER_CTRL_PALMODE_SHIFT 20 98 #define PALETTE_PALETTE_AND_DATA 0x00 99 #define PALETTE_PALETTE_ONLY 0x01 100 #define PALETTE_DATA_ONLY 0x02 101 #define RASTER_CTRL_REQDLY_SHIFT 12 102 #define RASTER_CTRL_MONO8B (1 << 9) 103 #define RASTER_CTRL_RBORDER (1 << 8) 104 #define RASTER_CTRL_LCDTFT (1 << 7) 105 #define RASTER_CTRL_LCDBW (1 << 1) 106 #define RASTER_CTRL_LCDEN (1 << 0) 107 #define LCD_RASTER_TIMING_0 0x2C 108 #define RASTER_TIMING_0_HBP_SHIFT 24 109 #define RASTER_TIMING_0_HFP_SHIFT 16 110 #define RASTER_TIMING_0_HSW_SHIFT 10 111 #define RASTER_TIMING_0_PPLLSB_SHIFT 4 112 #define RASTER_TIMING_0_PPLMSB_SHIFT 3 113 #define LCD_RASTER_TIMING_1 0x30 114 #define RASTER_TIMING_1_VBP_SHIFT 24 115 #define RASTER_TIMING_1_VFP_SHIFT 16 116 #define RASTER_TIMING_1_VSW_SHIFT 10 117 #define RASTER_TIMING_1_LPP_SHIFT 0 118 #define LCD_RASTER_TIMING_2 0x34 119 #define RASTER_TIMING_2_HSWHI_SHIFT 27 120 #define RASTER_TIMING_2_LPP_B10_SHIFT 26 121 #define RASTER_TIMING_2_PHSVS (1 << 25) 122 #define RASTER_TIMING_2_PHSVS_RISE (1 << 24) 123 #define RASTER_TIMING_2_PHSVS_FALL (0 << 24) 124 #define RASTER_TIMING_2_IOE (1 << 23) 125 #define RASTER_TIMING_2_IPC (1 << 22) 126 #define RASTER_TIMING_2_IHS (1 << 21) 127 #define RASTER_TIMING_2_IVS (1 << 20) 128 #define RASTER_TIMING_2_ACBI_SHIFT 16 129 #define RASTER_TIMING_2_ACB_SHIFT 8 130 #define RASTER_TIMING_2_HBPHI_SHIFT 4 131 #define RASTER_TIMING_2_HFPHI_SHIFT 0 132 #define LCD_RASTER_SUBPANEL 0x38 133 #define LCD_RASTER_SUBPANEL2 0x3C 134 #define LCD_LCDDMA_CTRL 0x40 135 #define LCDDMA_CTRL_DMA_MASTER_PRIO_SHIFT 16 136 #define LCDDMA_CTRL_TH_FIFO_RDY_SHIFT 8 137 #define LCDDMA_CTRL_BURST_SIZE_SHIFT 4 138 #define LCDDMA_CTRL_BYTES_SWAP (1 << 3) 139 #define LCDDMA_CTRL_BE (1 << 1) 140 #define LCDDMA_CTRL_FB0_ONLY 0 141 #define LCDDMA_CTRL_FB0_FB1 (1 << 0) 142 #define LCD_LCDDMA_FB0_BASE 0x44 143 #define LCD_LCDDMA_FB0_CEILING 0x48 144 #define LCD_LCDDMA_FB1_BASE 0x4C 145 #define LCD_LCDDMA_FB1_CEILING 0x50 146 #define LCD_SYSCONFIG 0x54 147 #define SYSCONFIG_STANDBY_FORCE (0 << 4) 148 #define SYSCONFIG_STANDBY_NONE (1 << 4) 149 #define SYSCONFIG_STANDBY_SMART (2 << 4) 150 #define SYSCONFIG_IDLE_FORCE (0 << 2) 151 #define SYSCONFIG_IDLE_NONE (1 << 2) 152 #define SYSCONFIG_IDLE_SMART (2 << 2) 153 #define LCD_IRQSTATUS_RAW 0x58 154 #define LCD_IRQSTATUS 0x5C 155 #define LCD_IRQENABLE_SET 0x60 156 #define LCD_IRQENABLE_CLEAR 0x64 157 #define IRQ_EOF1 (1 << 9) 158 #define IRQ_EOF0 (1 << 8) 159 #define IRQ_PL (1 << 6) 160 #define IRQ_FUF (1 << 5) 161 #define IRQ_ACB (1 << 3) 162 #define IRQ_SYNC_LOST (1 << 2) 163 #define IRQ_RASTER_DONE (1 << 1) 164 #define IRQ_FRAME_DONE (1 << 0) 165 #define LCD_END_OF_INT_IND 0x68 166 #define LCD_CLKC_ENABLE 0x6C 167 #define CLKC_ENABLE_DMA (1 << 2) 168 #define CLKC_ENABLE_LDID (1 << 1) 169 #define CLKC_ENABLE_CORE (1 << 0) 170 #define LCD_CLKC_RESET 0x70 171 #define CLKC_RESET_MAIN (1 << 3) 172 #define CLKC_RESET_DMA (1 << 2) 173 #define CLKC_RESET_LDID (1 << 1) 174 #define CLKC_RESET_CORE (1 << 0) 175 176 #define LCD_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx) 177 #define LCD_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx) 178 #define LCD_LOCK_INIT(_sc) mtx_init(&(_sc)->sc_mtx, \ 179 device_get_nameunit(_sc->sc_dev), "am335x_lcd", MTX_DEF) 180 #define LCD_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->sc_mtx); 181 182 #define LCD_READ4(_sc, reg) bus_read_4((_sc)->sc_mem_res, reg); 183 #define LCD_WRITE4(_sc, reg, value) \ 184 bus_write_4((_sc)->sc_mem_res, reg, value); 185 186 /* Backlight is controlled by eCAS interface on PWM unit 0 */ 187 #define PWM_UNIT 0 188 #define PWM_PERIOD 100 189 190 #define MODE_HBP(mode) ((mode)->htotal - (mode)->hsync_end) 191 #define MODE_HFP(mode) ((mode)->hsync_start - (mode)->hdisplay) 192 #define MODE_HSW(mode) ((mode)->hsync_end - (mode)->hsync_start) 193 #define MODE_VBP(mode) ((mode)->vtotal - (mode)->vsync_end) 194 #define MODE_VFP(mode) ((mode)->vsync_start - (mode)->vdisplay) 195 #define MODE_VSW(mode) ((mode)->vsync_end - (mode)->vsync_start) 196 197 #define MAX_PIXEL_CLOCK 126000 198 #define MAX_BANDWIDTH (1280*1024*60) 199 200 struct am335x_lcd_softc { 201 device_t sc_dev; 202 struct fb_info sc_fb_info; 203 struct resource *sc_mem_res; 204 struct resource *sc_irq_res; 205 void *sc_intr_hl; 206 struct mtx sc_mtx; 207 int sc_backlight; 208 struct sysctl_oid *sc_oid; 209 210 struct panel_info sc_panel; 211 212 /* Framebuffer */ 213 bus_dma_tag_t sc_dma_tag; 214 bus_dmamap_t sc_dma_map; 215 size_t sc_fb_size; 216 bus_addr_t sc_fb_phys; 217 uint8_t *sc_fb_base; 218 219 /* HDMI framer */ 220 phandle_t sc_hdmi_framer; 221 eventhandler_tag sc_hdmi_evh; 222 }; 223 224 static void 225 am335x_fb_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int err) 226 { 227 bus_addr_t *addr; 228 229 if (err) 230 return; 231 232 addr = (bus_addr_t*)arg; 233 *addr = segs[0].ds_addr; 234 } 235 236 static uint32_t 237 am335x_lcd_calc_divisor(uint32_t reference, uint32_t freq) 238 { 239 uint32_t div, i; 240 uint32_t delta, min_delta; 241 242 min_delta = freq; 243 div = 255; 244 245 /* Raster mode case: divisors are in range from 2 to 255 */ 246 for (i = 2; i < 255; i++) { 247 delta = abs(reference/i - freq); 248 if (delta < min_delta) { 249 div = i; 250 min_delta = delta; 251 } 252 } 253 254 return (div); 255 } 256 257 static int 258 am335x_lcd_sysctl_backlight(SYSCTL_HANDLER_ARGS) 259 { 260 struct am335x_lcd_softc *sc = (struct am335x_lcd_softc*)arg1; 261 int error; 262 int backlight; 263 264 backlight = sc->sc_backlight; 265 error = sysctl_handle_int(oidp, &backlight, 0, req); 266 267 if (error != 0 || req->newptr == NULL) 268 return (error); 269 270 if (backlight < 0) 271 backlight = 0; 272 if (backlight > 100) 273 backlight = 100; 274 275 LCD_LOCK(sc); 276 error = am335x_pwm_config_ecap(PWM_UNIT, PWM_PERIOD, 277 backlight*PWM_PERIOD/100); 278 if (error == 0) 279 sc->sc_backlight = backlight; 280 LCD_UNLOCK(sc); 281 282 return (error); 283 } 284 285 static uint32_t 286 am335x_mode_vrefresh(const struct videomode *mode) 287 { 288 uint32_t refresh; 289 290 /* Calculate vertical refresh rate */ 291 refresh = (mode->dot_clock * 1000 / mode->htotal); 292 refresh = (refresh + mode->vtotal / 2) / mode->vtotal; 293 294 if (mode->flags & VID_INTERLACE) 295 refresh *= 2; 296 if (mode->flags & VID_DBLSCAN) 297 refresh /= 2; 298 299 return refresh; 300 } 301 302 static int 303 am335x_mode_is_valid(const struct videomode *mode) 304 { 305 uint32_t hbp, hfp, hsw; 306 uint32_t vbp, vfp, vsw; 307 308 if (mode->dot_clock > MAX_PIXEL_CLOCK) 309 return (0); 310 311 if (mode->hdisplay & 0xf) 312 return (0); 313 314 if (mode->vdisplay > 2048) 315 return (0); 316 317 /* Check ranges for timing parameters */ 318 hbp = MODE_HBP(mode) - 1; 319 hfp = MODE_HFP(mode) - 1; 320 hsw = MODE_HSW(mode) - 1; 321 vbp = MODE_VBP(mode); 322 vfp = MODE_VFP(mode); 323 vsw = MODE_VSW(mode) - 1; 324 325 if (hbp > 0x3ff) 326 return (0); 327 if (hfp > 0x3ff) 328 return (0); 329 if (hsw > 0x3ff) 330 return (0); 331 332 if (vbp > 0xff) 333 return (0); 334 if (vfp > 0xff) 335 return (0); 336 if (vsw > 0x3f) 337 return (0); 338 if (mode->vdisplay*mode->hdisplay*am335x_mode_vrefresh(mode) 339 > MAX_BANDWIDTH) 340 return (0); 341 342 return (1); 343 } 344 345 static void 346 am335x_read_hdmi_property(device_t dev) 347 { 348 phandle_t node, xref; 349 phandle_t endpoint; 350 phandle_t hdmi_xref; 351 struct am335x_lcd_softc *sc; 352 353 sc = device_get_softc(dev); 354 node = ofw_bus_get_node(dev); 355 sc->sc_hdmi_framer = 0; 356 357 /* 358 * Old FreeBSD way of referencing to HDMI framer 359 */ 360 if (OF_getencprop(node, "hdmi", &hdmi_xref, sizeof(hdmi_xref)) != -1) { 361 sc->sc_hdmi_framer = hdmi_xref; 362 return; 363 } 364 365 /* 366 * Use bindings described in Linux docs: 367 * bindings/media/video-interfaces.txt 368 * We assume that the only endpoint in LCDC node 369 * is HDMI framer. 370 */ 371 node = ofw_bus_find_child(node, "port"); 372 373 /* No media bindings */ 374 if (node == 0) 375 return; 376 377 for (endpoint = OF_child(node); endpoint != 0; endpoint = OF_peer(endpoint)) { 378 if (OF_getencprop(endpoint, "remote-endpoint", &xref, sizeof(xref)) != -1) { 379 /* port/port@0/endpoint@0 */ 380 node = OF_node_from_xref(xref); 381 /* port/port@0 */ 382 node = OF_parent(node); 383 /* port */ 384 node = OF_parent(node); 385 /* actual owner of port, in our case HDMI framer */ 386 sc->sc_hdmi_framer = OF_xref_from_node(OF_parent(node)); 387 if (sc->sc_hdmi_framer != 0) 388 return; 389 } 390 } 391 } 392 393 static int 394 am335x_read_property(device_t dev, phandle_t node, const char *name, uint32_t *val) 395 { 396 pcell_t cell; 397 398 if ((OF_getencprop(node, name, &cell, sizeof(cell))) <= 0) { 399 device_printf(dev, "missing '%s' attribute in LCD panel info\n", 400 name); 401 return (ENXIO); 402 } 403 404 *val = cell; 405 406 return (0); 407 } 408 409 static int 410 am335x_read_timing(device_t dev, phandle_t node, struct panel_info *panel) 411 { 412 int error; 413 phandle_t timings_node, timing_node, native; 414 415 timings_node = ofw_bus_find_child(node, "display-timings"); 416 if (timings_node == 0) { 417 device_printf(dev, "no \"display-timings\" node\n"); 418 return (-1); 419 } 420 421 if (OF_searchencprop(timings_node, "native-mode", &native, 422 sizeof(native)) == -1) { 423 device_printf(dev, "no \"native-mode\" reference in \"timings\" node\n"); 424 return (-1); 425 } 426 427 timing_node = OF_node_from_xref(native); 428 429 error = 0; 430 if ((error = am335x_read_property(dev, timing_node, 431 "hactive", &panel->panel_width))) 432 goto out; 433 434 if ((error = am335x_read_property(dev, timing_node, 435 "vactive", &panel->panel_height))) 436 goto out; 437 438 if ((error = am335x_read_property(dev, timing_node, 439 "hfront-porch", &panel->panel_hfp))) 440 goto out; 441 442 if ((error = am335x_read_property(dev, timing_node, 443 "hback-porch", &panel->panel_hbp))) 444 goto out; 445 446 if ((error = am335x_read_property(dev, timing_node, 447 "hsync-len", &panel->panel_hsw))) 448 goto out; 449 450 if ((error = am335x_read_property(dev, timing_node, 451 "vfront-porch", &panel->panel_vfp))) 452 goto out; 453 454 if ((error = am335x_read_property(dev, timing_node, 455 "vback-porch", &panel->panel_vbp))) 456 goto out; 457 458 if ((error = am335x_read_property(dev, timing_node, 459 "vsync-len", &panel->panel_vsw))) 460 goto out; 461 462 if ((error = am335x_read_property(dev, timing_node, 463 "clock-frequency", &panel->panel_pxl_clk))) 464 goto out; 465 466 if ((error = am335x_read_property(dev, timing_node, 467 "pixelclk-active", &panel->pixelclk_active))) 468 goto out; 469 470 if ((error = am335x_read_property(dev, timing_node, 471 "hsync-active", &panel->hsync_active))) 472 goto out; 473 474 if ((error = am335x_read_property(dev, timing_node, 475 "vsync-active", &panel->vsync_active))) 476 goto out; 477 478 out: 479 return (error); 480 } 481 482 static int 483 am335x_read_panel_info(device_t dev, phandle_t node, struct panel_info *panel) 484 { 485 phandle_t panel_info_node; 486 487 panel_info_node = ofw_bus_find_child(node, "panel-info"); 488 if (panel_info_node == 0) 489 return (-1); 490 491 am335x_read_property(dev, panel_info_node, 492 "ac-bias", &panel->ac_bias); 493 494 am335x_read_property(dev, panel_info_node, 495 "ac-bias-intrpt", &panel->ac_bias_intrpt); 496 497 am335x_read_property(dev, panel_info_node, 498 "dma-burst-sz", &panel->dma_burst_sz); 499 500 am335x_read_property(dev, panel_info_node, 501 "bpp", &panel->bpp); 502 503 am335x_read_property(dev, panel_info_node, 504 "fdd", &panel->fdd); 505 506 am335x_read_property(dev, panel_info_node, 507 "sync-edge", &panel->sync_edge); 508 509 am335x_read_property(dev, panel_info_node, 510 "sync-ctrl", &panel->sync_ctrl); 511 512 return (0); 513 } 514 515 static void 516 am335x_lcd_intr(void *arg) 517 { 518 struct am335x_lcd_softc *sc = arg; 519 uint32_t reg; 520 521 reg = LCD_READ4(sc, LCD_IRQSTATUS); 522 LCD_WRITE4(sc, LCD_IRQSTATUS, reg); 523 /* Read value back to make sure it reached the hardware */ 524 reg = LCD_READ4(sc, LCD_IRQSTATUS); 525 526 if (reg & IRQ_SYNC_LOST) { 527 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 528 reg &= ~RASTER_CTRL_LCDEN; 529 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 530 531 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 532 reg |= RASTER_CTRL_LCDEN; 533 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 534 goto done; 535 } 536 537 if (reg & IRQ_PL) { 538 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 539 reg &= ~RASTER_CTRL_LCDEN; 540 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 541 542 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 543 reg |= RASTER_CTRL_LCDEN; 544 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 545 goto done; 546 } 547 548 if (reg & IRQ_EOF0) { 549 LCD_WRITE4(sc, LCD_LCDDMA_FB0_BASE, sc->sc_fb_phys); 550 LCD_WRITE4(sc, LCD_LCDDMA_FB0_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 551 reg &= ~IRQ_EOF0; 552 } 553 554 if (reg & IRQ_EOF1) { 555 LCD_WRITE4(sc, LCD_LCDDMA_FB1_BASE, sc->sc_fb_phys); 556 LCD_WRITE4(sc, LCD_LCDDMA_FB1_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 557 reg &= ~IRQ_EOF1; 558 } 559 560 if (reg & IRQ_FUF) { 561 /* TODO: Handle FUF */ 562 } 563 564 if (reg & IRQ_ACB) { 565 /* TODO: Handle ACB */ 566 } 567 568 done: 569 LCD_WRITE4(sc, LCD_END_OF_INT_IND, 0); 570 /* Read value back to make sure it reached the hardware */ 571 reg = LCD_READ4(sc, LCD_END_OF_INT_IND); 572 } 573 574 static const struct videomode * 575 am335x_lcd_pick_mode(struct edid_info *ei) 576 { 577 const struct videomode *videomode; 578 const struct videomode *m; 579 int n; 580 581 /* Get standard VGA as default */ 582 videomode = NULL; 583 584 /* 585 * Pick a mode. 586 */ 587 if (ei->edid_preferred_mode != NULL) { 588 if (am335x_mode_is_valid(ei->edid_preferred_mode)) 589 videomode = ei->edid_preferred_mode; 590 } 591 592 if (videomode == NULL) { 593 m = ei->edid_modes; 594 595 sort_modes(ei->edid_modes, 596 &ei->edid_preferred_mode, 597 ei->edid_nmodes); 598 for (n = 0; n < ei->edid_nmodes; n++) 599 if (am335x_mode_is_valid(&m[n])) { 600 videomode = &m[n]; 601 break; 602 } 603 } 604 605 return videomode; 606 } 607 608 static int 609 am335x_lcd_configure(struct am335x_lcd_softc *sc) 610 { 611 int div; 612 uint32_t reg, timing0, timing1, timing2; 613 uint32_t burst_log; 614 size_t dma_size; 615 uint32_t hbp, hfp, hsw; 616 uint32_t vbp, vfp, vsw; 617 uint32_t width, height; 618 unsigned int ref_freq; 619 int err; 620 621 /* 622 * try to adjust clock to get double of requested frequency 623 * HDMI/DVI displays are very sensitive to error in frequncy value 624 */ 625 if (ti_prcm_clk_set_source_freq(LCDC_CLK, sc->sc_panel.panel_pxl_clk*2)) { 626 device_printf(sc->sc_dev, "can't set source frequency\n"); 627 return (ENXIO); 628 } 629 630 if (ti_prcm_clk_get_source_freq(LCDC_CLK, &ref_freq)) { 631 device_printf(sc->sc_dev, "can't get reference frequency\n"); 632 return (ENXIO); 633 } 634 635 /* Panle initialization */ 636 dma_size = round_page(sc->sc_panel.panel_width*sc->sc_panel.panel_height*sc->sc_panel.bpp/8); 637 638 /* 639 * Now allocate framebuffer memory 640 */ 641 err = bus_dma_tag_create( 642 bus_get_dma_tag(sc->sc_dev), 643 4, 0, /* alignment, boundary */ 644 BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ 645 BUS_SPACE_MAXADDR, /* highaddr */ 646 NULL, NULL, /* filter, filterarg */ 647 dma_size, 1, /* maxsize, nsegments */ 648 dma_size, 0, /* maxsegsize, flags */ 649 NULL, NULL, /* lockfunc, lockarg */ 650 &sc->sc_dma_tag); 651 if (err) 652 goto done; 653 654 err = bus_dmamem_alloc(sc->sc_dma_tag, (void **)&sc->sc_fb_base, 655 BUS_DMA_COHERENT, &sc->sc_dma_map); 656 657 if (err) { 658 device_printf(sc->sc_dev, "cannot allocate framebuffer\n"); 659 goto done; 660 } 661 662 err = bus_dmamap_load(sc->sc_dma_tag, sc->sc_dma_map, sc->sc_fb_base, 663 dma_size, am335x_fb_dmamap_cb, &sc->sc_fb_phys, BUS_DMA_NOWAIT); 664 665 if (err) { 666 device_printf(sc->sc_dev, "cannot load DMA map\n"); 667 goto done; 668 } 669 670 /* Make sure it's blank */ 671 memset(sc->sc_fb_base, 0x0, dma_size); 672 673 /* Calculate actual FB Size */ 674 sc->sc_fb_size = sc->sc_panel.panel_width*sc->sc_panel.panel_height*sc->sc_panel.bpp/8; 675 676 /* Only raster mode is supported */ 677 reg = CTRL_RASTER_MODE; 678 div = am335x_lcd_calc_divisor(ref_freq, sc->sc_panel.panel_pxl_clk); 679 reg |= (div << CTRL_DIV_SHIFT); 680 LCD_WRITE4(sc, LCD_CTRL, reg); 681 682 /* Set timing */ 683 timing0 = timing1 = timing2 = 0; 684 685 hbp = sc->sc_panel.panel_hbp - 1; 686 hfp = sc->sc_panel.panel_hfp - 1; 687 hsw = sc->sc_panel.panel_hsw - 1; 688 689 vbp = sc->sc_panel.panel_vbp; 690 vfp = sc->sc_panel.panel_vfp; 691 vsw = sc->sc_panel.panel_vsw - 1; 692 693 height = sc->sc_panel.panel_height - 1; 694 width = sc->sc_panel.panel_width - 1; 695 696 /* Horizontal back porch */ 697 timing0 |= (hbp & 0xff) << RASTER_TIMING_0_HBP_SHIFT; 698 timing2 |= ((hbp >> 8) & 3) << RASTER_TIMING_2_HBPHI_SHIFT; 699 /* Horizontal front porch */ 700 timing0 |= (hfp & 0xff) << RASTER_TIMING_0_HFP_SHIFT; 701 timing2 |= ((hfp >> 8) & 3) << RASTER_TIMING_2_HFPHI_SHIFT; 702 /* Horizontal sync width */ 703 timing0 |= (hsw & 0x3f) << RASTER_TIMING_0_HSW_SHIFT; 704 timing2 |= ((hsw >> 6) & 0xf) << RASTER_TIMING_2_HSWHI_SHIFT; 705 706 /* Vertical back porch, front porch, sync width */ 707 timing1 |= (vbp & 0xff) << RASTER_TIMING_1_VBP_SHIFT; 708 timing1 |= (vfp & 0xff) << RASTER_TIMING_1_VFP_SHIFT; 709 timing1 |= (vsw & 0x3f) << RASTER_TIMING_1_VSW_SHIFT; 710 711 /* Pixels per line */ 712 timing0 |= ((width >> 10) & 1) 713 << RASTER_TIMING_0_PPLMSB_SHIFT; 714 timing0 |= ((width >> 4) & 0x3f) 715 << RASTER_TIMING_0_PPLLSB_SHIFT; 716 717 /* Lines per panel */ 718 timing1 |= (height & 0x3ff) 719 << RASTER_TIMING_1_LPP_SHIFT; 720 timing2 |= ((height >> 10 ) & 1) 721 << RASTER_TIMING_2_LPP_B10_SHIFT; 722 723 /* clock signal settings */ 724 if (sc->sc_panel.sync_ctrl) 725 timing2 |= RASTER_TIMING_2_PHSVS; 726 if (sc->sc_panel.sync_edge) 727 timing2 |= RASTER_TIMING_2_PHSVS_RISE; 728 else 729 timing2 |= RASTER_TIMING_2_PHSVS_FALL; 730 if (sc->sc_panel.hsync_active == 0) 731 timing2 |= RASTER_TIMING_2_IHS; 732 if (sc->sc_panel.vsync_active == 0) 733 timing2 |= RASTER_TIMING_2_IVS; 734 if (sc->sc_panel.pixelclk_active == 0) 735 timing2 |= RASTER_TIMING_2_IPC; 736 737 /* AC bias */ 738 timing2 |= (sc->sc_panel.ac_bias << RASTER_TIMING_2_ACB_SHIFT); 739 timing2 |= (sc->sc_panel.ac_bias_intrpt << RASTER_TIMING_2_ACBI_SHIFT); 740 741 LCD_WRITE4(sc, LCD_RASTER_TIMING_0, timing0); 742 LCD_WRITE4(sc, LCD_RASTER_TIMING_1, timing1); 743 LCD_WRITE4(sc, LCD_RASTER_TIMING_2, timing2); 744 745 /* DMA settings */ 746 reg = LCDDMA_CTRL_FB0_FB1; 747 /* Find power of 2 for current burst size */ 748 switch (sc->sc_panel.dma_burst_sz) { 749 case 1: 750 burst_log = 0; 751 break; 752 case 2: 753 burst_log = 1; 754 break; 755 case 4: 756 burst_log = 2; 757 break; 758 case 8: 759 burst_log = 3; 760 break; 761 case 16: 762 default: 763 burst_log = 4; 764 break; 765 } 766 reg |= (burst_log << LCDDMA_CTRL_BURST_SIZE_SHIFT); 767 /* XXX: FIFO TH */ 768 reg |= (0 << LCDDMA_CTRL_TH_FIFO_RDY_SHIFT); 769 LCD_WRITE4(sc, LCD_LCDDMA_CTRL, reg); 770 771 LCD_WRITE4(sc, LCD_LCDDMA_FB0_BASE, sc->sc_fb_phys); 772 LCD_WRITE4(sc, LCD_LCDDMA_FB0_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 773 LCD_WRITE4(sc, LCD_LCDDMA_FB1_BASE, sc->sc_fb_phys); 774 LCD_WRITE4(sc, LCD_LCDDMA_FB1_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1); 775 776 /* Enable LCD */ 777 reg = RASTER_CTRL_LCDTFT; 778 reg |= (sc->sc_panel.fdd << RASTER_CTRL_REQDLY_SHIFT); 779 reg |= (PALETTE_DATA_ONLY << RASTER_CTRL_PALMODE_SHIFT); 780 if (sc->sc_panel.bpp >= 24) 781 reg |= RASTER_CTRL_TFT24; 782 if (sc->sc_panel.bpp == 32) 783 reg |= RASTER_CTRL_TFT24_UNPACKED; 784 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 785 786 LCD_WRITE4(sc, LCD_CLKC_ENABLE, 787 CLKC_ENABLE_DMA | CLKC_ENABLE_LDID | CLKC_ENABLE_CORE); 788 789 LCD_WRITE4(sc, LCD_CLKC_RESET, CLKC_RESET_MAIN); 790 DELAY(100); 791 LCD_WRITE4(sc, LCD_CLKC_RESET, 0); 792 793 reg = IRQ_EOF1 | IRQ_EOF0 | IRQ_FUF | IRQ_PL | 794 IRQ_ACB | IRQ_SYNC_LOST | IRQ_RASTER_DONE | 795 IRQ_FRAME_DONE; 796 LCD_WRITE4(sc, LCD_IRQENABLE_SET, reg); 797 798 reg = LCD_READ4(sc, LCD_RASTER_CTRL); 799 reg |= RASTER_CTRL_LCDEN; 800 LCD_WRITE4(sc, LCD_RASTER_CTRL, reg); 801 802 LCD_WRITE4(sc, LCD_SYSCONFIG, 803 SYSCONFIG_STANDBY_SMART | SYSCONFIG_IDLE_SMART); 804 805 sc->sc_fb_info.fb_name = device_get_nameunit(sc->sc_dev); 806 sc->sc_fb_info.fb_vbase = (intptr_t)sc->sc_fb_base; 807 sc->sc_fb_info.fb_pbase = sc->sc_fb_phys; 808 sc->sc_fb_info.fb_size = sc->sc_fb_size; 809 sc->sc_fb_info.fb_bpp = sc->sc_fb_info.fb_depth = sc->sc_panel.bpp; 810 sc->sc_fb_info.fb_stride = sc->sc_panel.panel_width*sc->sc_panel.bpp / 8; 811 sc->sc_fb_info.fb_width = sc->sc_panel.panel_width; 812 sc->sc_fb_info.fb_height = sc->sc_panel.panel_height; 813 814 #ifdef DEV_SC 815 err = (sc_attach_unit(device_get_unit(sc->sc_dev), 816 device_get_flags(sc->sc_dev) | SC_AUTODETECT_KBD)); 817 818 if (err) { 819 device_printf(sc->sc_dev, "failed to attach syscons\n"); 820 goto fail; 821 } 822 823 am335x_lcd_syscons_setup((vm_offset_t)sc->sc_fb_base, sc->sc_fb_phys, &panel); 824 #else /* VT */ 825 device_t fbd = device_add_child(sc->sc_dev, "fbd", 826 device_get_unit(sc->sc_dev)); 827 if (fbd != NULL) { 828 if (device_probe_and_attach(fbd) != 0) 829 device_printf(sc->sc_dev, "failed to attach fbd device\n"); 830 } else 831 device_printf(sc->sc_dev, "failed to add fbd child\n"); 832 #endif 833 834 done: 835 return (err); 836 } 837 838 static void 839 am335x_lcd_hdmi_event(void *arg, device_t hdmi, int event) 840 { 841 struct am335x_lcd_softc *sc; 842 const struct videomode *videomode; 843 struct videomode hdmi_mode; 844 device_t hdmi_dev; 845 uint8_t *edid; 846 uint32_t edid_len; 847 struct edid_info ei; 848 849 sc = arg; 850 851 /* Nothing to work with */ 852 if (!sc->sc_hdmi_framer) { 853 device_printf(sc->sc_dev, "HDMI event without HDMI framer set\n"); 854 return; 855 } 856 857 hdmi_dev = OF_device_from_xref(sc->sc_hdmi_framer); 858 if (!hdmi_dev) { 859 device_printf(sc->sc_dev, "no actual device for \"hdmi\" property\n"); 860 return; 861 } 862 863 edid = NULL; 864 edid_len = 0; 865 if (HDMI_GET_EDID(hdmi_dev, &edid, &edid_len) != 0) { 866 device_printf(sc->sc_dev, "failed to get EDID info from HDMI framer\n"); 867 return; 868 } 869 870 videomode = NULL; 871 872 if (edid_parse(edid, &ei) == 0) { 873 edid_print(&ei); 874 videomode = am335x_lcd_pick_mode(&ei); 875 } else 876 device_printf(sc->sc_dev, "failed to parse EDID\n"); 877 878 /* Use standard VGA as fallback */ 879 if (videomode == NULL) 880 videomode = pick_mode_by_ref(640, 480, 60); 881 882 if (videomode == NULL) { 883 device_printf(sc->sc_dev, "failed to find usable videomode"); 884 return; 885 } 886 887 device_printf(sc->sc_dev, "detected videomode: %dx%d @ %dKHz\n", videomode->hdisplay, 888 videomode->vdisplay, am335x_mode_vrefresh(videomode)); 889 890 sc->sc_panel.panel_width = videomode->hdisplay; 891 sc->sc_panel.panel_height = videomode->vdisplay; 892 sc->sc_panel.panel_hfp = videomode->hsync_start - videomode->hdisplay; 893 sc->sc_panel.panel_hbp = videomode->htotal - videomode->hsync_end; 894 sc->sc_panel.panel_hsw = videomode->hsync_end - videomode->hsync_start; 895 sc->sc_panel.panel_vfp = videomode->vsync_start - videomode->vdisplay; 896 sc->sc_panel.panel_vbp = videomode->vtotal - videomode->vsync_end; 897 sc->sc_panel.panel_vsw = videomode->vsync_end - videomode->vsync_start; 898 sc->sc_panel.pixelclk_active = 1; 899 900 /* logic for HSYNC should be reversed */ 901 if (videomode->flags & VID_NHSYNC) 902 sc->sc_panel.hsync_active = 1; 903 else 904 sc->sc_panel.hsync_active = 0; 905 906 if (videomode->flags & VID_NVSYNC) 907 sc->sc_panel.vsync_active = 0; 908 else 909 sc->sc_panel.vsync_active = 1; 910 911 sc->sc_panel.panel_pxl_clk = videomode->dot_clock * 1000; 912 913 am335x_lcd_configure(sc); 914 915 memcpy(&hdmi_mode, videomode, sizeof(hdmi_mode)); 916 hdmi_mode.hskew = videomode->hsync_end - videomode->hsync_start; 917 hdmi_mode.flags |= VID_HSKEW; 918 919 HDMI_SET_VIDEOMODE(hdmi_dev, &hdmi_mode); 920 } 921 922 static int 923 am335x_lcd_probe(device_t dev) 924 { 925 #ifdef DEV_SC 926 int err; 927 #endif 928 929 if (!ofw_bus_status_okay(dev)) 930 return (ENXIO); 931 932 if (!ofw_bus_is_compatible(dev, "ti,am33xx-tilcdc")) 933 return (ENXIO); 934 935 device_set_desc(dev, "AM335x LCD controller"); 936 937 #ifdef DEV_SC 938 err = sc_probe_unit(device_get_unit(dev), 939 device_get_flags(dev) | SC_AUTODETECT_KBD); 940 if (err != 0) 941 return (err); 942 #endif 943 944 return (BUS_PROBE_DEFAULT); 945 } 946 947 static int 948 am335x_lcd_attach(device_t dev) 949 { 950 struct am335x_lcd_softc *sc; 951 952 int err; 953 int rid; 954 struct sysctl_ctx_list *ctx; 955 struct sysctl_oid *tree; 956 phandle_t root, panel_node; 957 958 err = 0; 959 sc = device_get_softc(dev); 960 sc->sc_dev = dev; 961 962 am335x_read_hdmi_property(dev); 963 964 root = OF_finddevice("/"); 965 if (root == -1) { 966 device_printf(dev, "failed to get FDT root node\n"); 967 return (ENXIO); 968 } 969 970 sc->sc_panel.ac_bias = 255; 971 sc->sc_panel.ac_bias_intrpt = 0; 972 sc->sc_panel.dma_burst_sz = 16; 973 sc->sc_panel.bpp = 16; 974 sc->sc_panel.fdd = 128; 975 sc->sc_panel.sync_edge = 0; 976 sc->sc_panel.sync_ctrl = 1; 977 978 panel_node = fdt_find_compatible(root, "ti,tilcdc,panel", 1); 979 if (panel_node != 0) { 980 device_printf(dev, "using static panel info\n"); 981 if (am335x_read_panel_info(dev, panel_node, &sc->sc_panel)) { 982 device_printf(dev, "failed to read panel info\n"); 983 return (ENXIO); 984 } 985 986 if (am335x_read_timing(dev, panel_node, &sc->sc_panel)) { 987 device_printf(dev, "failed to read timings\n"); 988 return (ENXIO); 989 } 990 } 991 992 ti_prcm_clk_enable(LCDC_CLK); 993 994 rid = 0; 995 sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 996 RF_ACTIVE); 997 if (!sc->sc_mem_res) { 998 device_printf(dev, "cannot allocate memory window\n"); 999 return (ENXIO); 1000 } 1001 1002 rid = 0; 1003 sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 1004 RF_ACTIVE); 1005 if (!sc->sc_irq_res) { 1006 bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res); 1007 device_printf(dev, "cannot allocate interrupt\n"); 1008 return (ENXIO); 1009 } 1010 1011 if (bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_MISC | INTR_MPSAFE, 1012 NULL, am335x_lcd_intr, sc, 1013 &sc->sc_intr_hl) != 0) { 1014 bus_release_resource(dev, SYS_RES_IRQ, rid, 1015 sc->sc_irq_res); 1016 bus_release_resource(dev, SYS_RES_MEMORY, rid, 1017 sc->sc_mem_res); 1018 device_printf(dev, "Unable to setup the irq handler.\n"); 1019 return (ENXIO); 1020 } 1021 1022 LCD_LOCK_INIT(sc); 1023 1024 /* Init backlight interface */ 1025 ctx = device_get_sysctl_ctx(sc->sc_dev); 1026 tree = device_get_sysctl_tree(sc->sc_dev); 1027 sc->sc_oid = SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, 1028 "backlight", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, sc, 0, 1029 am335x_lcd_sysctl_backlight, "I", "LCD backlight"); 1030 sc->sc_backlight = 0; 1031 /* Check if eCAS interface is available at this point */ 1032 if (am335x_pwm_config_ecap(PWM_UNIT, 1033 PWM_PERIOD, PWM_PERIOD) == 0) 1034 sc->sc_backlight = 100; 1035 1036 if (panel_node != 0) 1037 am335x_lcd_configure(sc); 1038 else 1039 sc->sc_hdmi_evh = EVENTHANDLER_REGISTER(hdmi_event, 1040 am335x_lcd_hdmi_event, sc, EVENTHANDLER_PRI_ANY); 1041 1042 return (0); 1043 } 1044 1045 static int 1046 am335x_lcd_detach(device_t dev) 1047 { 1048 /* Do not let unload driver */ 1049 return (EBUSY); 1050 } 1051 1052 static struct fb_info * 1053 am335x_lcd_fb_getinfo(device_t dev) 1054 { 1055 struct am335x_lcd_softc *sc; 1056 1057 sc = device_get_softc(dev); 1058 1059 return (&sc->sc_fb_info); 1060 } 1061 1062 static device_method_t am335x_lcd_methods[] = { 1063 DEVMETHOD(device_probe, am335x_lcd_probe), 1064 DEVMETHOD(device_attach, am335x_lcd_attach), 1065 DEVMETHOD(device_detach, am335x_lcd_detach), 1066 1067 /* Framebuffer service methods */ 1068 DEVMETHOD(fb_getinfo, am335x_lcd_fb_getinfo), 1069 1070 DEVMETHOD_END 1071 }; 1072 1073 static driver_t am335x_lcd_driver = { 1074 "fb", 1075 am335x_lcd_methods, 1076 sizeof(struct am335x_lcd_softc), 1077 }; 1078 1079 static devclass_t am335x_lcd_devclass; 1080 1081 DRIVER_MODULE(am335x_lcd, simplebus, am335x_lcd_driver, am335x_lcd_devclass, 0, 0); 1082 MODULE_VERSION(am335x_lcd, 1); 1083 MODULE_DEPEND(am335x_lcd, simplebus, 1, 1, 1); 1084