xref: /freebsd/sys/arm/ti/omap4/omap4_gpio.c (revision 4b9d6057)
1 /*-
2  * Copyright (c) 2011 Ben Gray <ben.r.gray@gmail.com>.
3  * Copyright (c) 2014 Andrew Turner <andrew@FreeBSD.org>
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. The name of the company nor the name of the author may be used to
15  *    endorse or promote products derived from this software without specific
16  *    prior written permission.
17  *
18  * THIS SOFTWARE IS PROVIDED BY BEN GRAY ``AS IS'' AND ANY EXPRESS OR
19  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
20  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
21  * IN NO EVENT SHALL BEN GRAY BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
22  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
23  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
24  * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
25  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
26  * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
27  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28  */
29 
30 #include <sys/param.h>
31 #include <sys/systm.h>
32 #include <sys/kernel.h>
33 #include <sys/module.h>
34 #include <sys/bus.h>
35 #include <sys/gpio.h>
36 
37 #include <machine/bus.h>
38 #include <machine/intr.h>
39 
40 #include <dev/ofw/ofw_bus.h>
41 #include <dev/ofw/ofw_bus_subr.h>
42 
43 #include <arm/ti/ti_cpuid.h>
44 #include <arm/ti/ti_gpio.h>
45 #include <arm/ti/ti_pinmux.h>
46 
47 #include <arm/ti/omap4/omap4_scm_padconf.h>
48 
49 #include "ti_gpio_if.h"
50 
51 static struct ofw_compat_data compat_data[] = {
52 	{"ti,omap4-gpio",	1},
53 	{"ti,gpio",		1},
54 	{NULL,			0},
55 };
56 
57 static int
58 omap4_gpio_probe(device_t dev)
59 {
60 
61 	if (!ofw_bus_status_okay(dev))
62 		return (ENXIO);
63 
64 	if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
65 		return (ENXIO);
66 	if (ti_chip() != CHIP_OMAP_4)
67 		return (ENXIO);
68 
69 	device_set_desc(dev, "TI OMAP4 General Purpose I/O (GPIO)");
70 
71 	return (0);
72 }
73 
74 static int
75 omap4_gpio_set_flags(device_t dev, uint32_t gpio, uint32_t flags)
76 {
77 	unsigned int state = 0;
78 	struct ti_gpio_softc *sc;
79 
80 	sc = device_get_softc(dev);
81 	/* First the SCM driver needs to be told to put the pad into GPIO mode */
82 	if (flags & GPIO_PIN_OUTPUT)
83 		state = PADCONF_PIN_OUTPUT;
84 	else if (flags & GPIO_PIN_INPUT) {
85 		if (flags & GPIO_PIN_PULLUP)
86 			state = PADCONF_PIN_INPUT_PULLUP;
87 		else if (flags & GPIO_PIN_PULLDOWN)
88 			state = PADCONF_PIN_INPUT_PULLDOWN;
89 		else
90 			state = PADCONF_PIN_INPUT;
91 	}
92 	return ti_pinmux_padconf_set_gpiomode((sc->sc_bank-1)*32 + gpio, state);
93 }
94 
95 static int
96 omap4_gpio_get_flags(device_t dev, uint32_t gpio, uint32_t *flags)
97 {
98 	unsigned int state;
99 	struct ti_gpio_softc *sc;
100 
101 	sc = device_get_softc(dev);
102 
103 	/* Get the current pin state */
104 	if (ti_pinmux_padconf_get_gpiomode((sc->sc_bank-1)*32 + gpio, &state) != 0) {
105 		*flags = 0;
106 		return (EINVAL);
107 	} else {
108 		switch (state) {
109 			case PADCONF_PIN_OUTPUT:
110 				*flags = GPIO_PIN_OUTPUT;
111 				break;
112 			case PADCONF_PIN_INPUT:
113 				*flags = GPIO_PIN_INPUT;
114 				break;
115 			case PADCONF_PIN_INPUT_PULLUP:
116 				*flags = GPIO_PIN_INPUT | GPIO_PIN_PULLUP;
117 				break;
118 			case PADCONF_PIN_INPUT_PULLDOWN:
119 				*flags = GPIO_PIN_INPUT | GPIO_PIN_PULLDOWN;
120 				break;
121 			default:
122 				*flags = 0;
123 				break;
124 		}
125 	}
126 
127 	return (0);
128 }
129 
130 static device_method_t omap4_gpio_methods[] = {
131 	/* bus interface */
132 	DEVMETHOD(device_probe, omap4_gpio_probe),
133 
134 	/* ti_gpio interface */
135 	DEVMETHOD(ti_gpio_set_flags, omap4_gpio_set_flags),
136 	DEVMETHOD(ti_gpio_get_flags, omap4_gpio_get_flags),
137 
138 	DEVMETHOD_END
139 };
140 
141 extern driver_t ti_gpio_driver;
142 
143 DEFINE_CLASS_1(gpio, omap4_gpio_driver, omap4_gpio_methods,
144     sizeof(struct ti_gpio_softc), ti_gpio_driver);
145 DRIVER_MODULE(omap4_gpio, simplebus, omap4_gpio_driver, 0, 0);
146