xref: /freebsd/sys/arm64/rockchip/rk_pinctrl.c (revision c1d255d3)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 2018 Emmanuel Vadot <manu@FreeBSD.org>
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25  * SUCH DAMAGE.
26  *
27  */
28 
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
31 
32 #include <sys/param.h>
33 #include <sys/systm.h>
34 #include <sys/bus.h>
35 
36 #include <sys/gpio.h>
37 #include <sys/kernel.h>
38 #include <sys/lock.h>
39 #include <sys/module.h>
40 #include <sys/mutex.h>
41 #include <sys/rman.h>
42 
43 #include <machine/bus.h>
44 #include <machine/resource.h>
45 #include <machine/intr.h>
46 
47 #include <dev/fdt/simplebus.h>
48 
49 #include <dev/ofw/ofw_bus.h>
50 #include <dev/ofw/ofw_bus_subr.h>
51 
52 #include <dev/fdt/fdt_pinctrl.h>
53 
54 #include <dev/extres/syscon/syscon.h>
55 
56 #include "gpio_if.h"
57 #include "syscon_if.h"
58 #include "fdt_pinctrl_if.h"
59 
60 struct rk_pinctrl_pin_drive {
61 	uint32_t	bank;
62 	uint32_t	subbank;
63 	uint32_t	offset;
64 	uint32_t	value;
65 	uint32_t	ma;
66 };
67 
68 struct rk_pinctrl_bank {
69 	uint32_t	bank;
70 	uint32_t	subbank;
71 	uint32_t	offset;
72 	uint32_t	nbits;
73 };
74 
75 struct rk_pinctrl_pin_fixup {
76 	uint32_t	bank;
77 	uint32_t	subbank;
78 	uint32_t	pin;
79 	uint32_t	reg;
80 	uint32_t	bit;
81 	uint32_t	mask;
82 };
83 
84 struct rk_pinctrl_gpio {
85 	uint32_t	bank;
86 	char		*gpio_name;
87 	device_t	gpio_dev;
88 };
89 
90 struct rk_pinctrl_softc;
91 
92 struct rk_pinctrl_conf {
93 	struct rk_pinctrl_bank		*iomux_conf;
94 	uint32_t			iomux_nbanks;
95 	struct rk_pinctrl_pin_fixup	*pin_fixup;
96 	uint32_t			npin_fixup;
97 	struct rk_pinctrl_pin_drive	*pin_drive;
98 	uint32_t			npin_drive;
99 	struct rk_pinctrl_gpio		*gpio_bank;
100 	uint32_t			ngpio_bank;
101 	uint32_t	(*get_pd_offset)(struct rk_pinctrl_softc *, uint32_t);
102 	struct syscon	*(*get_syscon)(struct rk_pinctrl_softc *, uint32_t);
103 	int		(*parse_bias)(phandle_t, int);
104 	int		(*resolv_bias_value)(int, int);
105 	int		(*get_bias_value)(int, int);
106 };
107 
108 struct rk_pinctrl_softc {
109 	struct simplebus_softc	simplebus_sc;
110 	device_t		dev;
111 	struct syscon		*grf;
112 	struct syscon		*pmu;
113 	struct rk_pinctrl_conf	*conf;
114 	struct mtx		mtx;
115 };
116 
117 #define	RK_PINCTRL_LOCK(_sc)		mtx_lock_spin(&(_sc)->mtx)
118 #define	RK_PINCTRL_UNLOCK(_sc)		mtx_unlock_spin(&(_sc)->mtx)
119 #define	RK_PINCTRL_LOCK_ASSERT(_sc)	mtx_assert(&(_sc)->mtx, MA_OWNED)
120 
121 #define	RK_IOMUX(_bank, _subbank, _offset, _nbits)			\
122 {									\
123 	.bank = _bank,							\
124 	.subbank = _subbank,						\
125 	.offset = _offset,						\
126 	.nbits = _nbits,						\
127 }
128 
129 #define	RK_PINFIX(_bank, _pin, _reg, _bit, _mask)			\
130 {									\
131 	.bank = _bank,							\
132 	.pin = _pin,							\
133 	.reg = _reg,							\
134 	.bit = _bit,							\
135 	.mask = _mask,							\
136 }
137 
138 #define	RK_PINDRIVE(_bank, _subbank, _offset, _value, _ma)		\
139 {									\
140 	.bank = _bank,							\
141 	.subbank = _subbank,						\
142 	.offset = _offset,						\
143 	.value = _value,						\
144 	.ma = _ma,							\
145 }
146 #define	RK_GPIO(_bank, _name)						\
147 {									\
148 	.bank = _bank,							\
149 	.gpio_name = _name,						\
150 }
151 
152 static struct rk_pinctrl_gpio rk3288_gpio_bank[] = {
153 	RK_GPIO(0, "gpio0"),
154 	RK_GPIO(1, "gpio1"),
155 	RK_GPIO(2, "gpio2"),
156 	RK_GPIO(3, "gpio3"),
157 	RK_GPIO(4, "gpio4"),
158 	RK_GPIO(5, "gpio5"),
159 	RK_GPIO(6, "gpio6"),
160 	RK_GPIO(7, "gpio7"),
161 	RK_GPIO(8, "gpio8"),
162 };
163 
164 static struct rk_pinctrl_bank rk3288_iomux_bank[] = {
165 	/*    bank sub  offs   nbits */
166 	/* PMU */
167 	RK_IOMUX(0, 0, 0x0084, 2),
168 	RK_IOMUX(0, 1, 0x0088, 2),
169 	RK_IOMUX(0, 2, 0x008C, 2),
170 	/* GFR */
171 	RK_IOMUX(1, 3, 0x000C, 2),
172 	RK_IOMUX(2, 0, 0x0010, 2),
173 	RK_IOMUX(2, 1, 0x0014, 2),
174 	RK_IOMUX(2, 2, 0x0018, 2),
175 	RK_IOMUX(2, 3, 0x001C, 2),
176 	RK_IOMUX(3, 0, 0x0020, 2),
177 	RK_IOMUX(3, 1, 0x0024, 2),
178 	RK_IOMUX(3, 2, 0x0028, 2),
179 	RK_IOMUX(3, 3, 0x002C, 4),
180 	RK_IOMUX(4, 0, 0x0034, 4),
181 	RK_IOMUX(4, 1, 0x003C, 4),
182 	RK_IOMUX(4, 2, 0x0044, 2),
183 	RK_IOMUX(4, 3, 0x0048, 2),
184 	/* 5,0 - Empty */
185 	RK_IOMUX(5, 1, 0x0050, 2),
186 	RK_IOMUX(5, 2, 0x0054, 2),
187 	/* 5,3 - Empty */
188 	RK_IOMUX(6, 0, 0x005C, 2),
189 	RK_IOMUX(6, 1, 0x0060, 2),
190 	RK_IOMUX(6, 2, 0x0064, 2),
191 	/* 6,3 - Empty */
192 	RK_IOMUX(7, 0, 0x006C, 2),
193 	RK_IOMUX(7, 1, 0x0070, 2),
194 	RK_IOMUX(7, 2, 0x0074, 4),
195 	/* 7,3 - Empty */
196 	RK_IOMUX(8, 0, 0x0080, 2),
197 	RK_IOMUX(8, 1, 0x0084, 2),
198 	/* 8,2 - Empty */
199 	/* 8,3 - Empty */
200 
201 };
202 
203 static struct rk_pinctrl_pin_fixup rk3288_pin_fixup[] = {
204 };
205 
206 static struct rk_pinctrl_pin_drive rk3288_pin_drive[] = {
207 	/*       bank sub offs val ma */
208 	/* GPIO0A (PMU)*/
209 	RK_PINDRIVE(0, 0, 0x070, 0, 2),
210 	RK_PINDRIVE(0, 0, 0x070, 1, 4),
211 	RK_PINDRIVE(0, 0, 0x070, 2, 8),
212 	RK_PINDRIVE(0, 0, 0x070, 3, 12),
213 
214 	/* GPIO0B (PMU)*/
215 	RK_PINDRIVE(0, 1, 0x074, 0, 2),
216 	RK_PINDRIVE(0, 1, 0x074, 1, 4),
217 	RK_PINDRIVE(0, 1, 0x074, 2, 8),
218 	RK_PINDRIVE(0, 1, 0x074, 3, 12),
219 
220 	/* GPIO0C (PMU)*/
221 	RK_PINDRIVE(0, 2, 0x078, 0, 2),
222 	RK_PINDRIVE(0, 2, 0x078, 1, 4),
223 	RK_PINDRIVE(0, 2, 0x078, 2, 8),
224 	RK_PINDRIVE(0, 2, 0x078, 3, 12),
225 
226 	/* GPIO1D */
227 	RK_PINDRIVE(1, 3, 0x1CC, 0, 2),
228 	RK_PINDRIVE(1, 3, 0x1CC, 1, 4),
229 	RK_PINDRIVE(1, 3, 0x1CC, 2, 8),
230 	RK_PINDRIVE(1, 3, 0x1CC, 3, 12),
231 
232 	/* GPIO2A */
233 	RK_PINDRIVE(2, 0, 0x1D0, 0, 2),
234 	RK_PINDRIVE(2, 0, 0x1D0, 1, 4),
235 	RK_PINDRIVE(2, 0, 0x1D0, 2, 8),
236 	RK_PINDRIVE(2, 0, 0x1D0, 3, 12),
237 
238 	/* GPIO2B */
239 	RK_PINDRIVE(2, 1, 0x1D4, 0, 2),
240 	RK_PINDRIVE(2, 1, 0x1D4, 1, 4),
241 	RK_PINDRIVE(2, 1, 0x1D4, 2, 8),
242 	RK_PINDRIVE(2, 1, 0x1D4, 3, 12),
243 
244 	/* GPIO2C */
245 	RK_PINDRIVE(2, 2, 0x1D8, 0, 2),
246 	RK_PINDRIVE(2, 2, 0x1D8, 1, 4),
247 	RK_PINDRIVE(2, 2, 0x1D8, 2, 8),
248 	RK_PINDRIVE(2, 2, 0x1D8, 3, 12),
249 
250 	/* GPIO2D */
251 	RK_PINDRIVE(2, 3, 0x1DC, 0, 2),
252 	RK_PINDRIVE(2, 3, 0x1DC, 1, 4),
253 	RK_PINDRIVE(2, 3, 0x1DC, 2, 8),
254 	RK_PINDRIVE(2, 3, 0x1DC, 3, 12),
255 
256 	/* GPIO3A */
257 	RK_PINDRIVE(3, 0, 0x1E0, 0, 2),
258 	RK_PINDRIVE(3, 0, 0x1E0, 1, 4),
259 	RK_PINDRIVE(3, 0, 0x1E0, 2, 8),
260 	RK_PINDRIVE(3, 0, 0x1E0, 3, 12),
261 
262 	/* GPIO3B */
263 	RK_PINDRIVE(3, 1, 0x1E4, 0, 2),
264 	RK_PINDRIVE(3, 1, 0x1E4, 1, 4),
265 	RK_PINDRIVE(3, 1, 0x1E4, 2, 8),
266 	RK_PINDRIVE(3, 1, 0x1E4, 3, 12),
267 
268 	/* GPIO3C */
269 	RK_PINDRIVE(3, 2, 0x1E8, 0, 2),
270 	RK_PINDRIVE(3, 2, 0x1E8, 1, 4),
271 	RK_PINDRIVE(3, 2, 0x1E8, 2, 8),
272 	RK_PINDRIVE(3, 2, 0x1E8, 3, 12),
273 
274 	/* GPIO3D */
275 	RK_PINDRIVE(3, 3, 0x1EC, 0, 2),
276 	RK_PINDRIVE(3, 3, 0x1EC, 1, 4),
277 	RK_PINDRIVE(3, 3, 0x1EC, 2, 8),
278 	RK_PINDRIVE(3, 3, 0x1EC, 3, 12),
279 
280 	/* GPIO4A */
281 	RK_PINDRIVE(4, 0, 0x1F0, 0, 2),
282 	RK_PINDRIVE(4, 0, 0x1F0, 1, 4),
283 	RK_PINDRIVE(4, 0, 0x1F0, 2, 8),
284 	RK_PINDRIVE(4, 0, 0x1F0, 3, 12),
285 
286 	/* GPIO4B */
287 	RK_PINDRIVE(4, 1, 0x1F4, 0, 2),
288 	RK_PINDRIVE(4, 1, 0x1F4, 1, 4),
289 	RK_PINDRIVE(4, 1, 0x1F4, 2, 8),
290 	RK_PINDRIVE(4, 1, 0x1F4, 3, 12),
291 
292 	/* GPIO4C */
293 	RK_PINDRIVE(4, 2, 0x1F8, 0, 2),
294 	RK_PINDRIVE(4, 2, 0x1F8, 1, 4),
295 	RK_PINDRIVE(4, 2, 0x1F8, 2, 8),
296 	RK_PINDRIVE(4, 2, 0x1F8, 3, 12),
297 
298 	/* GPIO4D */
299 	RK_PINDRIVE(4, 3, 0x1FC, 0, 2),
300 	RK_PINDRIVE(4, 3, 0x1FC, 1, 4),
301 	RK_PINDRIVE(4, 3, 0x1FC, 2, 8),
302 	RK_PINDRIVE(4, 3, 0x1FC, 3, 12),
303 
304 	/* GPIO5B */
305 	RK_PINDRIVE(5, 1, 0x204, 0, 2),
306 	RK_PINDRIVE(5, 1, 0x204, 1, 4),
307 	RK_PINDRIVE(5, 1, 0x204, 2, 8),
308 	RK_PINDRIVE(5, 1, 0x204, 3, 12),
309 
310 	/* GPIO5C */
311 	RK_PINDRIVE(5, 2, 0x208, 0, 2),
312 	RK_PINDRIVE(5, 2, 0x208, 1, 4),
313 	RK_PINDRIVE(5, 2, 0x208, 2, 8),
314 	RK_PINDRIVE(5, 2, 0x208, 3, 12),
315 
316 	/* GPIO6A */
317 	RK_PINDRIVE(6, 0, 0x210, 0, 2),
318 	RK_PINDRIVE(6, 0, 0x210, 1, 4),
319 	RK_PINDRIVE(6, 0, 0x210, 2, 8),
320 	RK_PINDRIVE(6, 0, 0x210, 3, 12),
321 
322 	/* GPIO6B */
323 	RK_PINDRIVE(6, 1, 0x214, 0, 2),
324 	RK_PINDRIVE(6, 1, 0x214, 1, 4),
325 	RK_PINDRIVE(6, 1, 0x214, 2, 8),
326 	RK_PINDRIVE(6, 1, 0x214, 3, 12),
327 
328 	/* GPIO6C */
329 	RK_PINDRIVE(6, 2, 0x218, 0, 2),
330 	RK_PINDRIVE(6, 2, 0x218, 1, 4),
331 	RK_PINDRIVE(6, 2, 0x218, 2, 8),
332 	RK_PINDRIVE(6, 2, 0x218, 3, 12),
333 
334 	/* GPIO7A */
335 	RK_PINDRIVE(7, 0, 0x220, 0, 2),
336 	RK_PINDRIVE(7, 0, 0x220, 1, 4),
337 	RK_PINDRIVE(7, 0, 0x220, 2, 8),
338 	RK_PINDRIVE(7, 0, 0x220, 3, 12),
339 
340 	/* GPIO7B */
341 	RK_PINDRIVE(7, 1, 0x224, 0, 2),
342 	RK_PINDRIVE(7, 1, 0x224, 1, 4),
343 	RK_PINDRIVE(7, 1, 0x224, 2, 8),
344 	RK_PINDRIVE(7, 1, 0x224, 3, 12),
345 
346 	/* GPIO7C */
347 	RK_PINDRIVE(7, 2, 0x228, 0, 2),
348 	RK_PINDRIVE(7, 2, 0x228, 1, 4),
349 	RK_PINDRIVE(7, 2, 0x228, 2, 8),
350 	RK_PINDRIVE(7, 2, 0x228, 3, 12),
351 
352 	/* GPIO8A */
353 	RK_PINDRIVE(8, 0, 0x230, 0, 2),
354 	RK_PINDRIVE(8, 0, 0x230, 1, 4),
355 	RK_PINDRIVE(8, 0, 0x230, 2, 8),
356 	RK_PINDRIVE(8, 0, 0x230, 3, 12),
357 
358 	/* GPIO8B */
359 	RK_PINDRIVE(8, 1, 0x234, 0, 2),
360 	RK_PINDRIVE(8, 1, 0x234, 1, 4),
361 	RK_PINDRIVE(8, 1, 0x234, 2, 8),
362 	RK_PINDRIVE(8, 1, 0x234, 3, 12),
363 };
364 
365 static uint32_t
366 rk3288_get_pd_offset(struct rk_pinctrl_softc *sc, uint32_t bank)
367 {
368 	if (bank == 0)
369 		return (0x064);		/* PMU */
370 	return (0x130);
371 }
372 
373 static struct syscon *
374 rk3288_get_syscon(struct rk_pinctrl_softc *sc, uint32_t bank)
375 {
376 	if (bank == 0)
377 		return (sc->pmu);
378 	return (sc->grf);
379 }
380 
381 static int
382 rk3288_parse_bias(phandle_t node, int bank)
383 {
384 	if (OF_hasprop(node, "bias-disable"))
385 		return (0);
386 	if (OF_hasprop(node, "bias-pull-up"))
387 		return (1);
388 	if (OF_hasprop(node, "bias-pull-down"))
389 		return (2);
390 
391 	return (-1);
392 }
393 
394 static int
395 rk3288_resolv_bias_value(int bank, int bias)
396 {
397 	int rv = 0;
398 
399 	if (bias == 1)
400 		rv = GPIO_PIN_PULLUP;
401 	else if (bias == 2)
402 		rv = GPIO_PIN_PULLDOWN;
403 
404 	return (rv);
405 }
406 
407 static int
408 rk3288_get_bias_value(int bank, int bias)
409 {
410 	int rv = 0;
411 
412 	if (bias & GPIO_PIN_PULLUP)
413 		rv = 1;
414 	else if (bias & GPIO_PIN_PULLDOWN)
415 		rv = 2;
416 
417 	return (rv);
418 }
419 
420 struct rk_pinctrl_conf rk3288_conf = {
421 	.iomux_conf = rk3288_iomux_bank,
422 	.iomux_nbanks = nitems(rk3288_iomux_bank),
423 	.pin_fixup = rk3288_pin_fixup,
424 	.npin_fixup = nitems(rk3288_pin_fixup),
425 	.pin_drive = rk3288_pin_drive,
426 	.npin_drive = nitems(rk3288_pin_drive),
427 	.gpio_bank = rk3288_gpio_bank,
428 	.ngpio_bank = nitems(rk3288_gpio_bank),
429 	.get_pd_offset = rk3288_get_pd_offset,
430 	.get_syscon = rk3288_get_syscon,
431 	.parse_bias = rk3288_parse_bias,
432 	.resolv_bias_value = rk3288_resolv_bias_value,
433 	.get_bias_value = rk3288_get_bias_value,
434 };
435 
436 static struct rk_pinctrl_gpio rk3328_gpio_bank[] = {
437 	RK_GPIO(0, "gpio0"),
438 	RK_GPIO(1, "gpio1"),
439 	RK_GPIO(2, "gpio2"),
440 	RK_GPIO(3, "gpio3"),
441 };
442 
443 static struct rk_pinctrl_bank rk3328_iomux_bank[] = {
444 	/*    bank sub offs nbits */
445 	RK_IOMUX(0, 0, 0x0000, 2),
446 	RK_IOMUX(0, 1, 0x0004, 2),
447 	RK_IOMUX(0, 2, 0x0008, 2),
448 	RK_IOMUX(0, 3, 0x000C, 2),
449 	RK_IOMUX(1, 0, 0x0010, 2),
450 	RK_IOMUX(1, 1, 0x0014, 2),
451 	RK_IOMUX(1, 2, 0x0018, 2),
452 	RK_IOMUX(1, 3, 0x001C, 2),
453 	RK_IOMUX(2, 0, 0x0020, 2),
454 	RK_IOMUX(2, 1, 0x0024, 3),
455 	RK_IOMUX(2, 2, 0x002c, 3),
456 	RK_IOMUX(2, 3, 0x0034, 2),
457 	RK_IOMUX(3, 0, 0x0038, 3),
458 	RK_IOMUX(3, 1, 0x0040, 3),
459 	RK_IOMUX(3, 2, 0x0048, 2),
460 	RK_IOMUX(3, 3, 0x004c, 2),
461 };
462 
463 static struct rk_pinctrl_pin_fixup rk3328_pin_fixup[] = {
464 	/*      bank  pin reg  bit  mask */
465 	RK_PINFIX(2, 12, 0x24,  8, 0x300),
466 	RK_PINFIX(2, 15, 0x28,  0, 0x7),
467 	RK_PINFIX(2, 23, 0x30, 14, 0x6000),
468 };
469 
470 static struct rk_pinctrl_pin_drive rk3328_pin_drive[] = {
471 	/*       bank sub  offs val ma */
472 	RK_PINDRIVE(0, 0, 0x200, 0, 2),
473 	RK_PINDRIVE(0, 0, 0x200, 1, 4),
474 	RK_PINDRIVE(0, 0, 0x200, 2, 8),
475 	RK_PINDRIVE(0, 0, 0x200, 3, 12),
476 
477 	RK_PINDRIVE(0, 1, 0x204, 0, 2),
478 	RK_PINDRIVE(0, 1, 0x204, 1, 4),
479 	RK_PINDRIVE(0, 1, 0x204, 2, 8),
480 	RK_PINDRIVE(0, 1, 0x204, 3, 12),
481 
482 	RK_PINDRIVE(0, 2, 0x208, 0, 2),
483 	RK_PINDRIVE(0, 2, 0x208, 1, 4),
484 	RK_PINDRIVE(0, 2, 0x208, 2, 8),
485 	RK_PINDRIVE(0, 2, 0x208, 3, 12),
486 
487 	RK_PINDRIVE(0, 3, 0x20C, 0, 2),
488 	RK_PINDRIVE(0, 3, 0x20C, 1, 4),
489 	RK_PINDRIVE(0, 3, 0x20C, 2, 8),
490 	RK_PINDRIVE(0, 3, 0x20C, 3, 12),
491 
492 	RK_PINDRIVE(1, 0, 0x210, 0, 2),
493 	RK_PINDRIVE(1, 0, 0x210, 1, 4),
494 	RK_PINDRIVE(1, 0, 0x210, 2, 8),
495 	RK_PINDRIVE(1, 0, 0x210, 3, 12),
496 
497 	RK_PINDRIVE(1, 1, 0x214, 0, 2),
498 	RK_PINDRIVE(1, 1, 0x214, 1, 4),
499 	RK_PINDRIVE(1, 1, 0x214, 2, 8),
500 	RK_PINDRIVE(1, 1, 0x214, 3, 12),
501 
502 	RK_PINDRIVE(1, 2, 0x218, 0, 2),
503 	RK_PINDRIVE(1, 2, 0x218, 1, 4),
504 	RK_PINDRIVE(1, 2, 0x218, 2, 8),
505 	RK_PINDRIVE(1, 2, 0x218, 3, 12),
506 
507 	RK_PINDRIVE(1, 3, 0x21C, 0, 2),
508 	RK_PINDRIVE(1, 3, 0x21C, 1, 4),
509 	RK_PINDRIVE(1, 3, 0x21C, 2, 8),
510 	RK_PINDRIVE(1, 3, 0x21C, 3, 12),
511 
512 	RK_PINDRIVE(2, 0, 0x220, 0, 2),
513 	RK_PINDRIVE(2, 0, 0x220, 1, 4),
514 	RK_PINDRIVE(2, 0, 0x220, 2, 8),
515 	RK_PINDRIVE(2, 0, 0x220, 3, 12),
516 
517 	RK_PINDRIVE(2, 1, 0x224, 0, 2),
518 	RK_PINDRIVE(2, 1, 0x224, 1, 4),
519 	RK_PINDRIVE(2, 1, 0x224, 2, 8),
520 	RK_PINDRIVE(2, 1, 0x224, 3, 12),
521 
522 	RK_PINDRIVE(2, 2, 0x228, 0, 2),
523 	RK_PINDRIVE(2, 2, 0x228, 1, 4),
524 	RK_PINDRIVE(2, 2, 0x228, 2, 8),
525 	RK_PINDRIVE(2, 2, 0x228, 3, 12),
526 
527 	RK_PINDRIVE(2, 3, 0x22C, 0, 2),
528 	RK_PINDRIVE(2, 3, 0x22C, 1, 4),
529 	RK_PINDRIVE(2, 3, 0x22C, 2, 8),
530 	RK_PINDRIVE(2, 3, 0x22C, 3, 12),
531 
532 	RK_PINDRIVE(3, 0, 0x230, 0, 2),
533 	RK_PINDRIVE(3, 0, 0x230, 1, 4),
534 	RK_PINDRIVE(3, 0, 0x230, 2, 8),
535 	RK_PINDRIVE(3, 0, 0x230, 3, 12),
536 
537 	RK_PINDRIVE(3, 1, 0x234, 0, 2),
538 	RK_PINDRIVE(3, 1, 0x234, 1, 4),
539 	RK_PINDRIVE(3, 1, 0x234, 2, 8),
540 	RK_PINDRIVE(3, 1, 0x234, 3, 12),
541 
542 	RK_PINDRIVE(3, 2, 0x238, 0, 2),
543 	RK_PINDRIVE(3, 2, 0x238, 1, 4),
544 	RK_PINDRIVE(3, 2, 0x238, 2, 8),
545 	RK_PINDRIVE(3, 2, 0x238, 3, 12),
546 
547 	RK_PINDRIVE(3, 3, 0x23C, 0, 2),
548 	RK_PINDRIVE(3, 3, 0x23C, 1, 4),
549 	RK_PINDRIVE(3, 3, 0x23C, 2, 8),
550 	RK_PINDRIVE(3, 3, 0x23C, 3, 12),
551 };
552 
553 static uint32_t
554 rk3328_get_pd_offset(struct rk_pinctrl_softc *sc, uint32_t bank)
555 {
556 	return (0x100);
557 }
558 
559 static struct syscon *
560 rk3328_get_syscon(struct rk_pinctrl_softc *sc, uint32_t bank)
561 {
562 	return (sc->grf);
563 }
564 
565 struct rk_pinctrl_conf rk3328_conf = {
566 	.iomux_conf = rk3328_iomux_bank,
567 	.iomux_nbanks = nitems(rk3328_iomux_bank),
568 	.pin_fixup = rk3328_pin_fixup,
569 	.npin_fixup = nitems(rk3328_pin_fixup),
570 	.pin_drive = rk3328_pin_drive,
571 	.npin_drive = nitems(rk3328_pin_drive),
572 	.gpio_bank = rk3328_gpio_bank,
573 	.ngpio_bank = nitems(rk3328_gpio_bank),
574 	.get_pd_offset = rk3328_get_pd_offset,
575 	.get_syscon = rk3328_get_syscon,
576 	.parse_bias = rk3288_parse_bias,
577 	.resolv_bias_value = rk3288_resolv_bias_value,
578 	.get_bias_value = rk3288_get_bias_value,
579 };
580 
581 static struct rk_pinctrl_gpio rk3399_gpio_bank[] = {
582 	RK_GPIO(0, "gpio0"),
583 	RK_GPIO(1, "gpio1"),
584 	RK_GPIO(2, "gpio2"),
585 	RK_GPIO(3, "gpio3"),
586 	RK_GPIO(4, "gpio4"),
587 };
588 
589 static struct rk_pinctrl_bank rk3399_iomux_bank[] = {
590 	/*    bank sub  offs   nbits */
591 	RK_IOMUX(0, 0, 0x0000, 2),
592 	RK_IOMUX(0, 1, 0x0004, 2),
593 	RK_IOMUX(0, 2, 0x0008, 2),
594 	RK_IOMUX(0, 3, 0x000C, 2),
595 	RK_IOMUX(1, 0, 0x0010, 2),
596 	RK_IOMUX(1, 1, 0x0014, 2),
597 	RK_IOMUX(1, 2, 0x0018, 2),
598 	RK_IOMUX(1, 3, 0x001C, 2),
599 	RK_IOMUX(2, 0, 0xE000, 2),
600 	RK_IOMUX(2, 1, 0xE004, 2),
601 	RK_IOMUX(2, 2, 0xE008, 2),
602 	RK_IOMUX(2, 3, 0xE00C, 2),
603 	RK_IOMUX(3, 0, 0xE010, 2),
604 	RK_IOMUX(3, 1, 0xE014, 2),
605 	RK_IOMUX(3, 2, 0xE018, 2),
606 	RK_IOMUX(3, 3, 0xE01C, 2),
607 	RK_IOMUX(4, 0, 0xE020, 2),
608 	RK_IOMUX(4, 1, 0xE024, 2),
609 	RK_IOMUX(4, 2, 0xE028, 2),
610 	RK_IOMUX(4, 3, 0xE02C, 2),
611 };
612 
613 static struct rk_pinctrl_pin_fixup rk3399_pin_fixup[] = {};
614 
615 static struct rk_pinctrl_pin_drive rk3399_pin_drive[] = {
616 	/*       bank sub offs val ma */
617 	/* GPIO0A */
618 	RK_PINDRIVE(0, 0, 0x80, 0, 5),
619 	RK_PINDRIVE(0, 0, 0x80, 1, 10),
620 	RK_PINDRIVE(0, 0, 0x80, 2, 15),
621 	RK_PINDRIVE(0, 0, 0x80, 3, 20),
622 
623 	/* GPIOB */
624 	RK_PINDRIVE(0, 1, 0x88, 0, 5),
625 	RK_PINDRIVE(0, 1, 0x88, 1, 10),
626 	RK_PINDRIVE(0, 1, 0x88, 2, 15),
627 	RK_PINDRIVE(0, 1, 0x88, 3, 20),
628 
629 	/* GPIO1A */
630 	RK_PINDRIVE(1, 0, 0xA0, 0, 3),
631 	RK_PINDRIVE(1, 0, 0xA0, 1, 6),
632 	RK_PINDRIVE(1, 0, 0xA0, 2, 9),
633 	RK_PINDRIVE(1, 0, 0xA0, 3, 12),
634 
635 	/* GPIO1B */
636 	RK_PINDRIVE(1, 1, 0xA8, 0, 3),
637 	RK_PINDRIVE(1, 1, 0xA8, 1, 6),
638 	RK_PINDRIVE(1, 1, 0xA8, 2, 9),
639 	RK_PINDRIVE(1, 1, 0xA8, 3, 12),
640 
641 	/* GPIO1C */
642 	RK_PINDRIVE(1, 2, 0xB0, 0, 3),
643 	RK_PINDRIVE(1, 2, 0xB0, 1, 6),
644 	RK_PINDRIVE(1, 2, 0xB0, 2, 9),
645 	RK_PINDRIVE(1, 2, 0xB0, 3, 12),
646 
647 	/* GPIO1D */
648 	RK_PINDRIVE(1, 3, 0xB8, 0, 3),
649 	RK_PINDRIVE(1, 3, 0xB8, 1, 6),
650 	RK_PINDRIVE(1, 3, 0xB8, 2, 9),
651 	RK_PINDRIVE(1, 3, 0xB8, 3, 12),
652 };
653 
654 static uint32_t
655 rk3399_get_pd_offset(struct rk_pinctrl_softc *sc, uint32_t bank)
656 {
657 	if (bank < 2)
658 		return (0x40);
659 
660 	return (0xE040);
661 }
662 
663 static struct syscon *
664 rk3399_get_syscon(struct rk_pinctrl_softc *sc, uint32_t bank)
665 {
666 	if (bank < 2)
667 		return (sc->pmu);
668 
669 	return (sc->grf);
670 }
671 
672 static int
673 rk3399_parse_bias(phandle_t node, int bank)
674 {
675 	int pullup, pulldown;
676 
677 	if (OF_hasprop(node, "bias-disable"))
678 		return (0);
679 
680 	switch (bank) {
681 	case 0:
682 	case 2:
683 		pullup = 3;
684 		pulldown = 1;
685 		break;
686 	case 1:
687 	case 3:
688 	case 4:
689 		pullup = 1;
690 		pulldown = 2;
691 		break;
692 	}
693 
694 	if (OF_hasprop(node, "bias-pull-up"))
695 		return (pullup);
696 	if (OF_hasprop(node, "bias-pull-down"))
697 		return (pulldown);
698 
699 	return (-1);
700 }
701 
702 static int
703 rk3399_resolv_bias_value(int bank, int bias)
704 {
705 	int rv = 0;
706 
707 	switch (bank) {
708 	case 0:
709 	case 2:
710 		if (bias == 3)
711 			rv = GPIO_PIN_PULLUP;
712 		else if (bias == 1)
713 			rv = GPIO_PIN_PULLDOWN;
714 		break;
715 	case 1:
716 	case 3:
717 	case 4:
718 		if (bias == 1)
719 			rv = GPIO_PIN_PULLUP;
720 		else if (bias == 2)
721 			rv = GPIO_PIN_PULLDOWN;
722 		break;
723 	}
724 
725 	return (rv);
726 }
727 
728 static int
729 rk3399_get_bias_value(int bank, int bias)
730 {
731 	int rv = 0;
732 
733 	switch (bank) {
734 	case 0:
735 	case 2:
736 		if (bias & GPIO_PIN_PULLUP)
737 			rv = 3;
738 		else if (bias & GPIO_PIN_PULLDOWN)
739 			rv = 1;
740 		break;
741 	case 1:
742 	case 3:
743 	case 4:
744 		if (bias & GPIO_PIN_PULLUP)
745 			rv = 1;
746 		else if (bias & GPIO_PIN_PULLDOWN)
747 			rv = 2;
748 		break;
749 	}
750 
751 	return (rv);
752 }
753 
754 struct rk_pinctrl_conf rk3399_conf = {
755 	.iomux_conf = rk3399_iomux_bank,
756 	.iomux_nbanks = nitems(rk3399_iomux_bank),
757 	.pin_fixup = rk3399_pin_fixup,
758 	.npin_fixup = nitems(rk3399_pin_fixup),
759 	.pin_drive = rk3399_pin_drive,
760 	.npin_drive = nitems(rk3399_pin_drive),
761 	.gpio_bank = rk3399_gpio_bank,
762 	.ngpio_bank = nitems(rk3399_gpio_bank),
763 	.get_pd_offset = rk3399_get_pd_offset,
764 	.get_syscon = rk3399_get_syscon,
765 	.parse_bias = rk3399_parse_bias,
766 	.resolv_bias_value = rk3399_resolv_bias_value,
767 	.get_bias_value = rk3399_get_bias_value,
768 };
769 
770 static struct ofw_compat_data compat_data[] = {
771 	{"rockchip,rk3288-pinctrl", (uintptr_t)&rk3288_conf},
772 	{"rockchip,rk3328-pinctrl", (uintptr_t)&rk3328_conf},
773 	{"rockchip,rk3399-pinctrl", (uintptr_t)&rk3399_conf},
774 	{NULL,             0}
775 };
776 
777 static int
778 rk_pinctrl_parse_drive(struct rk_pinctrl_softc *sc, phandle_t node,
779   uint32_t bank, uint32_t subbank, uint32_t *drive, uint32_t *offset)
780 {
781 	uint32_t value;
782 	int i;
783 
784 	if (OF_getencprop(node, "drive-strength", &value,
785 	    sizeof(value)) != 0)
786 		return (-1);
787 
788 	/* Map to the correct drive value */
789 	for (i = 0; i < sc->conf->npin_drive; i++) {
790 		if (sc->conf->pin_drive[i].bank != bank &&
791 		    sc->conf->pin_drive[i].subbank != subbank)
792 			continue;
793 		if (sc->conf->pin_drive[i].ma == value) {
794 			*drive = sc->conf->pin_drive[i].value;
795 			return (0);
796 		}
797 	}
798 
799 	return (-1);
800 }
801 
802 static void
803 rk_pinctrl_get_fixup(struct rk_pinctrl_softc *sc, uint32_t bank, uint32_t pin,
804     uint32_t *reg, uint32_t *mask, uint32_t *bit)
805 {
806 	int i;
807 
808 	for (i = 0; i < sc->conf->npin_fixup; i++)
809 		if (sc->conf->pin_fixup[i].bank == bank &&
810 		    sc->conf->pin_fixup[i].pin == pin) {
811 			*reg = sc->conf->pin_fixup[i].reg;
812 			*mask = sc->conf->pin_fixup[i].mask;
813 			*bit = sc->conf->pin_fixup[i].bit;
814 
815 			return;
816 		}
817 }
818 
819 static int
820 rk_pinctrl_handle_io(struct rk_pinctrl_softc *sc, phandle_t node, uint32_t bank,
821 uint32_t pin)
822 {
823 	bool have_cfg, have_direction, have_value;
824 	uint32_t  direction_value, pin_value;
825 	struct rk_pinctrl_gpio *gpio;
826 	int i, rv;
827 
828 	have_cfg = false;
829 	have_direction = false;
830 	have_value = false;
831 
832 	/* Get (subset of) GPIO pin properties. */
833 	if (OF_hasprop(node, "output-disable")) {
834 		have_cfg = true;
835 		have_direction = true;
836 		direction_value = GPIO_PIN_INPUT;
837 	}
838 
839 	if (OF_hasprop(node, "output-enable")) {
840 		have_cfg = true;
841 		have_direction = true;
842 		direction_value = GPIO_PIN_OUTPUT;
843 	}
844 
845 	if (OF_hasprop(node, "output-low")) {
846 		have_cfg = true;
847 		have_direction = true;
848 		direction_value = GPIO_PIN_OUTPUT;
849 		have_value = true;
850 		pin_value = 0;
851 	}
852 
853 	if (OF_hasprop(node, "output-high")) {
854 		have_cfg = true;
855 		have_direction = true;
856 		direction_value = GPIO_PIN_OUTPUT;
857 		have_value = true;
858 		pin_value = 1;
859 	}
860 
861 	if (!have_cfg)
862 		return (0);
863 
864 	/* Find gpio */
865 	gpio = NULL;
866 	for(i = 0; i < sc->conf->ngpio_bank; i++) {
867 		if (bank ==  sc->conf->gpio_bank[i].bank) {
868 			gpio = sc->conf->gpio_bank + i;
869 			break;
870 		}
871 	}
872 	if (gpio == NULL) {
873 		device_printf(sc->dev, "Cannot find GPIO bank %d\n", bank);
874 		return (ENXIO);
875 	}
876 	if (gpio->gpio_dev == NULL) {
877 		device_printf(sc->dev,
878 		    "No GPIO subdevice found for bank %d\n", bank);
879 		return (ENXIO);
880 	}
881 
882 	rv = 0;
883 	if (have_value) {
884 		rv = GPIO_PIN_SET(gpio->gpio_dev, pin, pin_value);
885 		if (rv != 0) {
886 			device_printf(sc->dev, "Cannot set GPIO value: %d\n",
887 			    rv);
888 			return (rv);
889 		}
890 	}
891 
892 	if (have_direction) {
893 		rv = GPIO_PIN_SETFLAGS(gpio->gpio_dev, pin, direction_value);
894 		if (rv != 0) {
895 			device_printf(sc->dev,
896 			    "Cannot set GPIO direction: %d\n", rv);
897 			return (rv);
898 		}
899 	}
900 
901 	return (0);
902 }
903 
904 static void
905 rk_pinctrl_configure_pin(struct rk_pinctrl_softc *sc, uint32_t *pindata)
906 {
907 	phandle_t pin_conf;
908 	struct syscon *syscon;
909 	uint32_t bank, subbank, pin, function, bias;
910 	uint32_t bit, mask, reg, drive;
911 	int i, rv;
912 
913 	bank = pindata[0];
914 	pin = pindata[1];
915 	function = pindata[2];
916 	pin_conf = OF_node_from_xref(pindata[3]);
917 	subbank = pin / 8;
918 
919 	for (i = 0; i < sc->conf->iomux_nbanks; i++)
920 		if (sc->conf->iomux_conf[i].bank == bank &&
921 		    sc->conf->iomux_conf[i].subbank == subbank)
922 			break;
923 
924 	if (i == sc->conf->iomux_nbanks) {
925 		device_printf(sc->dev, "Unknown pin %d in bank %d\n", pin,
926 		    bank);
927 		return;
928 	}
929 
930 	/* Find syscon */
931 	syscon = sc->conf->get_syscon(sc, bank);
932 
933 	/* Setup GPIO properties first */
934 	rv = rk_pinctrl_handle_io(sc, pin_conf, bank, pin);
935 
936 	/* Then pin pull-up/down */
937 	bias = sc->conf->parse_bias(pin_conf, bank);
938 	if (bias >= 0) {
939 		reg = sc->conf->get_pd_offset(sc, bank);
940 		reg += bank * 0x10 + ((pin / 8) * 0x4);
941 		bit = (pin % 8) * 2;
942 		mask = (0x3 << bit);
943 		SYSCON_MODIFY_4(syscon, reg, mask, bias << bit | (mask << 16));
944 	}
945 
946 	/* Then drive strength */
947 	rv = rk_pinctrl_parse_drive(sc, pin_conf, bank, subbank, &drive, &reg);
948 	if (rv == 0) {
949 		bit = (pin % 8) * 2;
950 		mask = (0x3 << bit);
951 		SYSCON_MODIFY_4(syscon, reg, mask, drive << bit | (mask << 16));
952 	}
953 
954 	/* Finally set the pin function */
955 	reg = sc->conf->iomux_conf[i].offset;
956 	switch (sc->conf->iomux_conf[i].nbits) {
957 	case 4:
958 		if ((pin % 8) >= 4)
959 			reg += 0x4;
960 		bit = (pin % 4) * 4;
961 		mask = (0xF << bit);
962 		break;
963 	case 3:
964 		if ((pin % 8) >= 5)
965 			reg += 4;
966 		bit = (pin % 8 % 5) * 3;
967 		mask = (0x7 << bit);
968 		break;
969 	case 2:
970 		bit = (pin % 8) * 2;
971 		mask = (0x3 << bit);
972 		break;
973 	default:
974 		device_printf(sc->dev,
975 		    "Unknown pin stride width %d in bank %d\n",
976 		    sc->conf->iomux_conf[i].nbits, bank);
977 		return;
978 	}
979 	rk_pinctrl_get_fixup(sc, bank, pin, &reg, &mask, &bit);
980 
981 	/*
982 	 * NOTE: not all syscon registers uses hi-word write mask, thus
983 	 * register modify method should be used.
984 	 * XXXX We should not pass write mask to syscon register
985 	 * without hi-word write mask.
986 	 */
987 	SYSCON_MODIFY_4(syscon, reg, mask, function << bit | (mask << 16));
988 }
989 
990 static int
991 rk_pinctrl_configure_pins(device_t dev, phandle_t cfgxref)
992 {
993 	struct rk_pinctrl_softc *sc;
994 	phandle_t node;
995 	uint32_t *pins;
996 	int i, npins;
997 
998 	sc = device_get_softc(dev);
999 	node = OF_node_from_xref(cfgxref);
1000 
1001 	npins = OF_getencprop_alloc_multi(node, "rockchip,pins",  sizeof(*pins),
1002 	    (void **)&pins);
1003 	if (npins <= 0)
1004 		return (ENOENT);
1005 
1006 	for (i = 0; i != npins; i += 4)
1007 		rk_pinctrl_configure_pin(sc, pins + i);
1008 
1009 	return (0);
1010 }
1011 
1012 static int
1013 rk_pinctrl_is_gpio_locked(struct rk_pinctrl_softc *sc, struct syscon *syscon,
1014   int bank, uint32_t pin, bool *is_gpio)
1015 {
1016 	uint32_t subbank, bit, mask, reg;
1017 	uint32_t pinfunc;
1018 	int i;
1019 
1020 	RK_PINCTRL_LOCK_ASSERT(sc);
1021 
1022 	subbank = pin / 8;
1023 	*is_gpio = false;
1024 
1025 	for (i = 0; i < sc->conf->iomux_nbanks; i++)
1026 		if (sc->conf->iomux_conf[i].bank == bank &&
1027 		    sc->conf->iomux_conf[i].subbank == subbank)
1028 			break;
1029 
1030 	if (i == sc->conf->iomux_nbanks) {
1031 		device_printf(sc->dev, "Unknown pin %d in bank %d\n", pin,
1032 		    bank);
1033 		return (EINVAL);
1034 	}
1035 
1036 	syscon = sc->conf->get_syscon(sc, bank);
1037 
1038 	/* Parse pin function */
1039 	reg = sc->conf->iomux_conf[i].offset;
1040 	switch (sc->conf->iomux_conf[i].nbits) {
1041 	case 4:
1042 		if ((pin % 8) >= 4)
1043 			reg += 0x4;
1044 		bit = (pin % 4) * 4;
1045 		mask = (0xF << bit);
1046 		break;
1047 	case 3:
1048 		if ((pin % 8) >= 5)
1049 			reg += 4;
1050 		bit = (pin % 8 % 5) * 3;
1051 		mask = (0x7 << bit);
1052 		break;
1053 	case 2:
1054 		bit = (pin % 8) * 2;
1055 		mask = (0x3 << bit);
1056 		break;
1057 	default:
1058 		device_printf(sc->dev,
1059 		    "Unknown pin stride width %d in bank %d\n",
1060 		    sc->conf->iomux_conf[i].nbits, bank);
1061 		return (EINVAL);
1062 	}
1063 	rk_pinctrl_get_fixup(sc, bank, pin, &reg, &mask, &bit);
1064 
1065 	reg = SYSCON_READ_4(syscon, reg);
1066 	pinfunc = (reg & mask) >> bit;
1067 
1068 	/* Test if the pin is in gpio mode */
1069 	if (pinfunc == 0)
1070 		*is_gpio = true;
1071 
1072 	return (0);
1073 }
1074 
1075 static int
1076 rk_pinctrl_get_bank(struct rk_pinctrl_softc *sc, device_t gpio, int *bank)
1077 {
1078 	int i;
1079 
1080 	for (i = 0; i < sc->conf->ngpio_bank; i++) {
1081 		if (sc->conf->gpio_bank[i].gpio_dev == gpio)
1082 			break;
1083 	}
1084 	if (i == sc->conf->ngpio_bank)
1085 		return (EINVAL);
1086 
1087 	*bank = i;
1088 	return (0);
1089 }
1090 
1091 static int
1092 rk_pinctrl_is_gpio(device_t pinctrl, device_t gpio, uint32_t pin, bool *is_gpio)
1093 {
1094 	struct rk_pinctrl_softc *sc;
1095 	struct syscon *syscon;
1096 	int bank;
1097 	int rv;
1098 
1099 	sc = device_get_softc(pinctrl);
1100 	RK_PINCTRL_LOCK(sc);
1101 
1102 	rv = rk_pinctrl_get_bank(sc, gpio, &bank);
1103 	if (rv != 0)
1104 		goto done;
1105 	syscon = sc->conf->get_syscon(sc, bank);
1106 	rv = rk_pinctrl_is_gpio_locked(sc, syscon, bank, pin, is_gpio);
1107 
1108 done:
1109 	RK_PINCTRL_UNLOCK(sc);
1110 
1111 	return (rv);
1112 }
1113 
1114 static int
1115 rk_pinctrl_get_flags(device_t pinctrl, device_t gpio, uint32_t pin,
1116     uint32_t *flags)
1117 {
1118 	struct rk_pinctrl_softc *sc;
1119 	struct syscon *syscon;
1120 	uint32_t reg, mask, bit;
1121 	uint32_t bias;
1122 	int bank;
1123 	int rv = 0;
1124 	bool is_gpio;
1125 
1126 	sc = device_get_softc(pinctrl);
1127 	RK_PINCTRL_LOCK(sc);
1128 
1129 	rv = rk_pinctrl_get_bank(sc, gpio, &bank);
1130 	if (rv != 0)
1131 		goto done;
1132 	syscon = sc->conf->get_syscon(sc, bank);
1133 	rv = rk_pinctrl_is_gpio_locked(sc, syscon, bank, pin, &is_gpio);
1134 	if (rv != 0)
1135 		goto done;
1136 	if (!is_gpio) {
1137 		rv = EINVAL;
1138 		goto done;
1139 	}
1140 	/* Get the pullup/pulldown configuration */
1141 	reg = sc->conf->get_pd_offset(sc, bank);
1142 	reg += bank * 0x10 + ((pin / 8) * 0x4);
1143 	bit = (pin % 8) * 2;
1144 	mask = (0x3 << bit) << 16;
1145 	reg = SYSCON_READ_4(syscon, reg);
1146 	reg = (reg >> bit) & 0x3;
1147 	bias = sc->conf->resolv_bias_value(bank, reg);
1148 	*flags = bias;
1149 
1150 done:
1151 	RK_PINCTRL_UNLOCK(sc);
1152 	return (rv);
1153 }
1154 
1155 static int
1156 rk_pinctrl_set_flags(device_t pinctrl, device_t gpio, uint32_t pin,
1157     uint32_t flags)
1158 {
1159 	struct rk_pinctrl_softc *sc;
1160 	struct syscon *syscon;
1161 	uint32_t bit, mask, reg;
1162 	uint32_t bias;
1163 	int bank;
1164 	int rv = 0;
1165 	bool is_gpio;
1166 
1167 	sc = device_get_softc(pinctrl);
1168 	RK_PINCTRL_LOCK(sc);
1169 
1170 	rv = rk_pinctrl_get_bank(sc, gpio, &bank);
1171 	if (rv != 0)
1172 		goto done;
1173 	syscon = sc->conf->get_syscon(sc, bank);
1174 	rv = rk_pinctrl_is_gpio_locked(sc, syscon, bank, pin, &is_gpio);
1175 	if (rv != 0)
1176 		goto done;
1177 	if (!is_gpio) {
1178 		rv = EINVAL;
1179 		goto done;
1180 	}
1181 	/* Get the pullup/pulldown configuration */
1182 	reg = sc->conf->get_pd_offset(sc, bank);
1183 	reg += bank * 0x10 + ((pin / 8) * 0x4);
1184 	bit = (pin % 8) * 2;
1185 	mask = (0x3 << bit);
1186 	bias = sc->conf->get_bias_value(bank, flags);
1187 	SYSCON_MODIFY_4(syscon, reg, mask, bias << bit | (mask << 16));
1188 
1189 done:
1190 	RK_PINCTRL_UNLOCK(sc);
1191 	return (rv);
1192 }
1193 
1194 static int
1195 rk_pinctrl_register_gpio(struct rk_pinctrl_softc *sc, char *gpio_name,
1196     device_t gpio_dev)
1197 {
1198 	int i;
1199 
1200 	for(i = 0; i < sc->conf->ngpio_bank; i++) {
1201 		if (strcmp(gpio_name, sc->conf->gpio_bank[i].gpio_name) != 0)
1202 			continue;
1203 		sc->conf->gpio_bank[i].gpio_dev = gpio_dev;
1204 		return(0);
1205 	}
1206 	return (ENXIO);
1207 }
1208 
1209 static int
1210 rk_pinctrl_probe(device_t dev)
1211 {
1212 
1213 	if (!ofw_bus_status_okay(dev))
1214 		return (ENXIO);
1215 
1216 	if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
1217 		return (ENXIO);
1218 
1219 	device_set_desc(dev, "RockChip Pinctrl controller");
1220 	return (BUS_PROBE_DEFAULT);
1221 }
1222 
1223 static int
1224 rk_pinctrl_attach(device_t dev)
1225 {
1226 	struct rk_pinctrl_softc *sc;
1227 	phandle_t node;
1228 	device_t cdev;
1229 	char *gpio_name, *eptr;
1230 	int rv;
1231 
1232 	sc = device_get_softc(dev);
1233 	sc->dev = dev;
1234 
1235 	node = ofw_bus_get_node(dev);
1236 
1237 	if (OF_hasprop(node, "rockchip,grf") &&
1238 	    syscon_get_by_ofw_property(dev, node,
1239 	    "rockchip,grf", &sc->grf) != 0) {
1240 		device_printf(dev, "cannot get grf driver handle\n");
1241 		return (ENXIO);
1242 	}
1243 
1244 	/* RK3399,RK3288 has banks in PMU. RK3328 does not have a PMU. */
1245 	if (ofw_bus_node_is_compatible(node, "rockchip,rk3399-pinctrl") ||
1246 	    ofw_bus_node_is_compatible(node, "rockchip,rk3288-pinctrl")) {
1247 		if (OF_hasprop(node, "rockchip,pmu") &&
1248 		    syscon_get_by_ofw_property(dev, node,
1249 		    "rockchip,pmu", &sc->pmu) != 0) {
1250 			device_printf(dev, "cannot get pmu driver handle\n");
1251 			return (ENXIO);
1252 		}
1253 	}
1254 
1255 	mtx_init(&sc->mtx, "rk pinctrl", "pinctrl", MTX_SPIN);
1256 
1257 	sc->conf = (struct rk_pinctrl_conf *)ofw_bus_search_compatible(dev,
1258 	    compat_data)->ocd_data;
1259 
1260 	fdt_pinctrl_register(dev, "rockchip,pins");
1261 
1262 	simplebus_init(dev, node);
1263 
1264 	bus_generic_probe(dev);
1265 
1266 	/* Attach child devices */
1267 	for (node = OF_child(node); node > 0; node = OF_peer(node)) {
1268 		if (!ofw_bus_node_is_compatible(node, "rockchip,gpio-bank"))
1269 			continue;
1270 
1271 		rv = OF_getprop_alloc(node, "name", (void **)&gpio_name);
1272 		if (rv <= 0) {
1273 			device_printf(sc->dev, "Cannot GPIO subdevice name.\n");
1274 			continue;
1275 		}
1276 
1277 		cdev = simplebus_add_device(dev, node, 0, NULL, -1, NULL);
1278 		if (cdev == NULL) {
1279 			device_printf(dev, " Cannot add GPIO subdevice: %s\n",
1280 			    gpio_name);
1281 			OF_prop_free(gpio_name);
1282 			continue;
1283 		}
1284 
1285 		rv = device_probe_and_attach(cdev);
1286 		if (rv != 0) {
1287 			device_printf(sc->dev,
1288 			    "Cannot attach GPIO subdevice: %s\n", gpio_name);
1289 			OF_prop_free(gpio_name);
1290 			continue;
1291 		}
1292 
1293 		/* Grep device name from name property */
1294 		eptr = gpio_name;
1295 		strsep(&eptr, "@");
1296 		if (gpio_name == eptr) {
1297 			device_printf(sc->dev,
1298 			    "Unrecognized format of GPIO subdevice name: %s\n",
1299 			    gpio_name);
1300 			OF_prop_free(gpio_name);
1301 			continue;
1302 		}
1303 		rv =  rk_pinctrl_register_gpio(sc, gpio_name, cdev);
1304 		if (rv != 0) {
1305 			device_printf(sc->dev,
1306 			    "Cannot register GPIO subdevice %s: %d\n",
1307 			    gpio_name, rv);
1308 			OF_prop_free(gpio_name);
1309 			continue;
1310 		}
1311 		OF_prop_free(gpio_name);
1312 	}
1313 
1314 	fdt_pinctrl_configure_tree(dev);
1315 
1316 	return (bus_generic_attach(dev));
1317 }
1318 
1319 static int
1320 rk_pinctrl_detach(device_t dev)
1321 {
1322 
1323 	return (EBUSY);
1324 }
1325 
1326 static device_method_t rk_pinctrl_methods[] = {
1327 	/* Device interface */
1328 	DEVMETHOD(device_probe,			rk_pinctrl_probe),
1329 	DEVMETHOD(device_attach,		rk_pinctrl_attach),
1330 	DEVMETHOD(device_detach,		rk_pinctrl_detach),
1331 
1332         /* fdt_pinctrl interface */
1333 	DEVMETHOD(fdt_pinctrl_configure,	rk_pinctrl_configure_pins),
1334 	DEVMETHOD(fdt_pinctrl_is_gpio,		rk_pinctrl_is_gpio),
1335 	DEVMETHOD(fdt_pinctrl_get_flags,	rk_pinctrl_get_flags),
1336 	DEVMETHOD(fdt_pinctrl_set_flags,	rk_pinctrl_set_flags),
1337 
1338 	DEVMETHOD_END
1339 };
1340 
1341 static devclass_t rk_pinctrl_devclass;
1342 
1343 DEFINE_CLASS_1(rk_pinctrl, rk_pinctrl_driver, rk_pinctrl_methods,
1344     sizeof(struct rk_pinctrl_softc), simplebus_driver);
1345 
1346 EARLY_DRIVER_MODULE(rk_pinctrl, simplebus, rk_pinctrl_driver,
1347     rk_pinctrl_devclass, 0, 0, BUS_PASS_INTERRUPT + BUS_PASS_ORDER_MIDDLE);
1348 MODULE_VERSION(rk_pinctrl, 1);
1349