xref: /freebsd/sys/arm64/rockchip/rk_pinctrl.c (revision e17f5b1d)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
3  *
4  * Copyright (c) 2018 Emmanuel Vadot <manu@FreeBSD.org>
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25  * SUCH DAMAGE.
26  *
27  */
28 
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
31 
32 #include <sys/param.h>
33 #include <sys/systm.h>
34 #include <sys/bus.h>
35 
36 #include <sys/gpio.h>
37 #include <sys/kernel.h>
38 #include <sys/lock.h>
39 #include <sys/module.h>
40 #include <sys/mutex.h>
41 #include <sys/rman.h>
42 
43 #include <machine/bus.h>
44 #include <machine/resource.h>
45 #include <machine/intr.h>
46 
47 #include <dev/fdt/simplebus.h>
48 
49 #include <dev/ofw/ofw_bus.h>
50 #include <dev/ofw/ofw_bus_subr.h>
51 
52 #include <dev/fdt/fdt_pinctrl.h>
53 
54 #include <dev/extres/syscon/syscon.h>
55 
56 #include "gpio_if.h"
57 #include "syscon_if.h"
58 #include "fdt_pinctrl_if.h"
59 
60 struct rk_pinctrl_pin_drive {
61 	uint32_t	bank;
62 	uint32_t	subbank;
63 	uint32_t	offset;
64 	uint32_t	value;
65 	uint32_t	ma;
66 };
67 
68 struct rk_pinctrl_bank {
69 	uint32_t	bank;
70 	uint32_t	subbank;
71 	uint32_t	offset;
72 	uint32_t	nbits;
73 };
74 
75 struct rk_pinctrl_pin_fixup {
76 	uint32_t	bank;
77 	uint32_t	subbank;
78 	uint32_t	pin;
79 	uint32_t	reg;
80 	uint32_t	bit;
81 	uint32_t	mask;
82 };
83 
84 struct rk_pinctrl_gpio {
85 	uint32_t	bank;
86 	char		*gpio_name;
87 	device_t	gpio_dev;
88 };
89 
90 
91 struct rk_pinctrl_softc;
92 
93 struct rk_pinctrl_conf {
94 	struct rk_pinctrl_bank		*iomux_conf;
95 	uint32_t			iomux_nbanks;
96 	struct rk_pinctrl_pin_fixup	*pin_fixup;
97 	uint32_t			npin_fixup;
98 	struct rk_pinctrl_pin_drive	*pin_drive;
99 	uint32_t			npin_drive;
100 	struct rk_pinctrl_gpio		*gpio_bank;
101 	uint32_t			ngpio_bank;
102 	uint32_t	(*get_pd_offset)(struct rk_pinctrl_softc *, uint32_t);
103 	struct syscon	*(*get_syscon)(struct rk_pinctrl_softc *, uint32_t);
104 	int		(*parse_bias)(phandle_t, int);
105 	int		(*resolv_bias_value)(int, int);
106 	int		(*get_bias_value)(int, int);
107 };
108 
109 struct rk_pinctrl_softc {
110 	struct simplebus_softc	simplebus_sc;
111 	device_t		dev;
112 	struct syscon		*grf;
113 	struct syscon		*pmu;
114 	struct rk_pinctrl_conf	*conf;
115 	struct mtx		mtx;
116 };
117 
118 #define	RK_PINCTRL_LOCK(_sc)		mtx_lock_spin(&(_sc)->mtx)
119 #define	RK_PINCTRL_UNLOCK(_sc)		mtx_unlock_spin(&(_sc)->mtx)
120 #define	RK_PINCTRL_LOCK_ASSERT(_sc)	mtx_assert(&(_sc)->mtx, MA_OWNED)
121 
122 #define	RK_IOMUX(_bank, _subbank, _offset, _nbits)			\
123 {									\
124 	.bank = _bank,							\
125 	.subbank = _subbank,						\
126 	.offset = _offset,						\
127 	.nbits = _nbits,						\
128 }
129 
130 #define	RK_PINFIX(_bank, _pin, _reg, _bit, _mask)			\
131 {									\
132 	.bank = _bank,							\
133 	.pin = _pin,							\
134 	.reg = _reg,							\
135 	.bit = _bit,							\
136 	.mask = _mask,							\
137 }
138 
139 #define	RK_PINDRIVE(_bank, _subbank, _offset, _value, _ma)		\
140 {									\
141 	.bank = _bank,							\
142 	.subbank = _subbank,						\
143 	.offset = _offset,						\
144 	.value = _value,						\
145 	.ma = _ma,							\
146 }
147 #define	RK_GPIO(_bank, _name)						\
148 {									\
149 	.bank = _bank,							\
150 	.gpio_name = _name,						\
151 }
152 
153 static struct rk_pinctrl_gpio rk3288_gpio_bank[] = {
154 	RK_GPIO(0, "gpio0"),
155 	RK_GPIO(1, "gpio1"),
156 	RK_GPIO(2, "gpio2"),
157 	RK_GPIO(3, "gpio3"),
158 	RK_GPIO(4, "gpio4"),
159 	RK_GPIO(5, "gpio5"),
160 	RK_GPIO(6, "gpio6"),
161 	RK_GPIO(7, "gpio7"),
162 	RK_GPIO(8, "gpio8"),
163 };
164 
165 static struct rk_pinctrl_bank rk3288_iomux_bank[] = {
166 	/*    bank sub  offs   nbits */
167 	/* PMU */
168 	RK_IOMUX(0, 0, 0x0084, 2),
169 	RK_IOMUX(0, 1, 0x0088, 2),
170 	RK_IOMUX(0, 2, 0x008C, 2),
171 	/* GFR */
172 	RK_IOMUX(1, 3, 0x000C, 2),
173 	RK_IOMUX(2, 0, 0x0010, 2),
174 	RK_IOMUX(2, 1, 0x0014, 2),
175 	RK_IOMUX(2, 2, 0x0018, 2),
176 	RK_IOMUX(2, 3, 0x001C, 2),
177 	RK_IOMUX(3, 0, 0x0020, 2),
178 	RK_IOMUX(3, 1, 0x0024, 2),
179 	RK_IOMUX(3, 2, 0x0028, 2),
180 	RK_IOMUX(3, 3, 0x002C, 4),
181 	RK_IOMUX(4, 0, 0x0034, 4),
182 	RK_IOMUX(4, 1, 0x003C, 4),
183 	RK_IOMUX(4, 2, 0x0044, 2),
184 	RK_IOMUX(4, 3, 0x0048, 2),
185 	/* 5,0 - Empty */
186 	RK_IOMUX(5, 1, 0x0050, 2),
187 	RK_IOMUX(5, 2, 0x0054, 2),
188 	/* 5,3 - Empty */
189 	RK_IOMUX(6, 0, 0x005C, 2),
190 	RK_IOMUX(6, 1, 0x0060, 2),
191 	RK_IOMUX(6, 2, 0x0064, 2),
192 	/* 6,3 - Empty */
193 	RK_IOMUX(7, 0, 0x006C, 2),
194 	RK_IOMUX(7, 1, 0x0070, 2),
195 	RK_IOMUX(7, 2, 0x0074, 4),
196 	/* 7,3 - Empty */
197 	RK_IOMUX(8, 0, 0x0080, 2),
198 	RK_IOMUX(8, 1, 0x0084, 2),
199 	/* 8,2 - Empty */
200 	/* 8,3 - Empty */
201 
202 };
203 
204 static struct rk_pinctrl_pin_fixup rk3288_pin_fixup[] = {
205 };
206 
207 static struct rk_pinctrl_pin_drive rk3288_pin_drive[] = {
208 	/*       bank sub offs val ma */
209 	/* GPIO0A (PMU)*/
210 	RK_PINDRIVE(0, 0, 0x070, 0, 2),
211 	RK_PINDRIVE(0, 0, 0x070, 1, 4),
212 	RK_PINDRIVE(0, 0, 0x070, 2, 8),
213 	RK_PINDRIVE(0, 0, 0x070, 3, 12),
214 
215 	/* GPIO0B (PMU)*/
216 	RK_PINDRIVE(0, 1, 0x074, 0, 2),
217 	RK_PINDRIVE(0, 1, 0x074, 1, 4),
218 	RK_PINDRIVE(0, 1, 0x074, 2, 8),
219 	RK_PINDRIVE(0, 1, 0x074, 3, 12),
220 
221 	/* GPIO0C (PMU)*/
222 	RK_PINDRIVE(0, 2, 0x078, 0, 2),
223 	RK_PINDRIVE(0, 2, 0x078, 1, 4),
224 	RK_PINDRIVE(0, 2, 0x078, 2, 8),
225 	RK_PINDRIVE(0, 2, 0x078, 3, 12),
226 
227 	/* GPIO1D */
228 	RK_PINDRIVE(1, 3, 0x1CC, 0, 2),
229 	RK_PINDRIVE(1, 3, 0x1CC, 1, 4),
230 	RK_PINDRIVE(1, 3, 0x1CC, 2, 8),
231 	RK_PINDRIVE(1, 3, 0x1CC, 3, 12),
232 
233 	/* GPIO2A */
234 	RK_PINDRIVE(2, 0, 0x1D0, 0, 2),
235 	RK_PINDRIVE(2, 0, 0x1D0, 1, 4),
236 	RK_PINDRIVE(2, 0, 0x1D0, 2, 8),
237 	RK_PINDRIVE(2, 0, 0x1D0, 3, 12),
238 
239 	/* GPIO2B */
240 	RK_PINDRIVE(2, 1, 0x1D4, 0, 2),
241 	RK_PINDRIVE(2, 1, 0x1D4, 1, 4),
242 	RK_PINDRIVE(2, 1, 0x1D4, 2, 8),
243 	RK_PINDRIVE(2, 1, 0x1D4, 3, 12),
244 
245 	/* GPIO2C */
246 	RK_PINDRIVE(2, 2, 0x1D8, 0, 2),
247 	RK_PINDRIVE(2, 2, 0x1D8, 1, 4),
248 	RK_PINDRIVE(2, 2, 0x1D8, 2, 8),
249 	RK_PINDRIVE(2, 2, 0x1D8, 3, 12),
250 
251 	/* GPIO2D */
252 	RK_PINDRIVE(2, 3, 0x1DC, 0, 2),
253 	RK_PINDRIVE(2, 3, 0x1DC, 1, 4),
254 	RK_PINDRIVE(2, 3, 0x1DC, 2, 8),
255 	RK_PINDRIVE(2, 3, 0x1DC, 3, 12),
256 
257 	/* GPIO3A */
258 	RK_PINDRIVE(3, 0, 0x1E0, 0, 2),
259 	RK_PINDRIVE(3, 0, 0x1E0, 1, 4),
260 	RK_PINDRIVE(3, 0, 0x1E0, 2, 8),
261 	RK_PINDRIVE(3, 0, 0x1E0, 3, 12),
262 
263 	/* GPIO3B */
264 	RK_PINDRIVE(3, 1, 0x1E4, 0, 2),
265 	RK_PINDRIVE(3, 1, 0x1E4, 1, 4),
266 	RK_PINDRIVE(3, 1, 0x1E4, 2, 8),
267 	RK_PINDRIVE(3, 1, 0x1E4, 3, 12),
268 
269 	/* GPIO3C */
270 	RK_PINDRIVE(3, 2, 0x1E8, 0, 2),
271 	RK_PINDRIVE(3, 2, 0x1E8, 1, 4),
272 	RK_PINDRIVE(3, 2, 0x1E8, 2, 8),
273 	RK_PINDRIVE(3, 2, 0x1E8, 3, 12),
274 
275 	/* GPIO3D */
276 	RK_PINDRIVE(3, 3, 0x1EC, 0, 2),
277 	RK_PINDRIVE(3, 3, 0x1EC, 1, 4),
278 	RK_PINDRIVE(3, 3, 0x1EC, 2, 8),
279 	RK_PINDRIVE(3, 3, 0x1EC, 3, 12),
280 
281 	/* GPIO4A */
282 	RK_PINDRIVE(4, 0, 0x1F0, 0, 2),
283 	RK_PINDRIVE(4, 0, 0x1F0, 1, 4),
284 	RK_PINDRIVE(4, 0, 0x1F0, 2, 8),
285 	RK_PINDRIVE(4, 0, 0x1F0, 3, 12),
286 
287 	/* GPIO4B */
288 	RK_PINDRIVE(4, 1, 0x1F4, 0, 2),
289 	RK_PINDRIVE(4, 1, 0x1F4, 1, 4),
290 	RK_PINDRIVE(4, 1, 0x1F4, 2, 8),
291 	RK_PINDRIVE(4, 1, 0x1F4, 3, 12),
292 
293 	/* GPIO4C */
294 	RK_PINDRIVE(4, 2, 0x1F8, 0, 2),
295 	RK_PINDRIVE(4, 2, 0x1F8, 1, 4),
296 	RK_PINDRIVE(4, 2, 0x1F8, 2, 8),
297 	RK_PINDRIVE(4, 2, 0x1F8, 3, 12),
298 
299 	/* GPIO4D */
300 	RK_PINDRIVE(4, 3, 0x1FC, 0, 2),
301 	RK_PINDRIVE(4, 3, 0x1FC, 1, 4),
302 	RK_PINDRIVE(4, 3, 0x1FC, 2, 8),
303 	RK_PINDRIVE(4, 3, 0x1FC, 3, 12),
304 
305 	/* GPIO5B */
306 	RK_PINDRIVE(5, 1, 0x204, 0, 2),
307 	RK_PINDRIVE(5, 1, 0x204, 1, 4),
308 	RK_PINDRIVE(5, 1, 0x204, 2, 8),
309 	RK_PINDRIVE(5, 1, 0x204, 3, 12),
310 
311 	/* GPIO5C */
312 	RK_PINDRIVE(5, 2, 0x208, 0, 2),
313 	RK_PINDRIVE(5, 2, 0x208, 1, 4),
314 	RK_PINDRIVE(5, 2, 0x208, 2, 8),
315 	RK_PINDRIVE(5, 2, 0x208, 3, 12),
316 
317 	/* GPIO6A */
318 	RK_PINDRIVE(6, 0, 0x210, 0, 2),
319 	RK_PINDRIVE(6, 0, 0x210, 1, 4),
320 	RK_PINDRIVE(6, 0, 0x210, 2, 8),
321 	RK_PINDRIVE(6, 0, 0x210, 3, 12),
322 
323 	/* GPIO6B */
324 	RK_PINDRIVE(6, 1, 0x214, 0, 2),
325 	RK_PINDRIVE(6, 1, 0x214, 1, 4),
326 	RK_PINDRIVE(6, 1, 0x214, 2, 8),
327 	RK_PINDRIVE(6, 1, 0x214, 3, 12),
328 
329 	/* GPIO6C */
330 	RK_PINDRIVE(6, 2, 0x218, 0, 2),
331 	RK_PINDRIVE(6, 2, 0x218, 1, 4),
332 	RK_PINDRIVE(6, 2, 0x218, 2, 8),
333 	RK_PINDRIVE(6, 2, 0x218, 3, 12),
334 
335 	/* GPIO7A */
336 	RK_PINDRIVE(7, 0, 0x220, 0, 2),
337 	RK_PINDRIVE(7, 0, 0x220, 1, 4),
338 	RK_PINDRIVE(7, 0, 0x220, 2, 8),
339 	RK_PINDRIVE(7, 0, 0x220, 3, 12),
340 
341 	/* GPIO7B */
342 	RK_PINDRIVE(7, 1, 0x224, 0, 2),
343 	RK_PINDRIVE(7, 1, 0x224, 1, 4),
344 	RK_PINDRIVE(7, 1, 0x224, 2, 8),
345 	RK_PINDRIVE(7, 1, 0x224, 3, 12),
346 
347 	/* GPIO7C */
348 	RK_PINDRIVE(7, 2, 0x228, 0, 2),
349 	RK_PINDRIVE(7, 2, 0x228, 1, 4),
350 	RK_PINDRIVE(7, 2, 0x228, 2, 8),
351 	RK_PINDRIVE(7, 2, 0x228, 3, 12),
352 
353 	/* GPIO8A */
354 	RK_PINDRIVE(8, 0, 0x230, 0, 2),
355 	RK_PINDRIVE(8, 0, 0x230, 1, 4),
356 	RK_PINDRIVE(8, 0, 0x230, 2, 8),
357 	RK_PINDRIVE(8, 0, 0x230, 3, 12),
358 
359 	/* GPIO8B */
360 	RK_PINDRIVE(8, 1, 0x234, 0, 2),
361 	RK_PINDRIVE(8, 1, 0x234, 1, 4),
362 	RK_PINDRIVE(8, 1, 0x234, 2, 8),
363 	RK_PINDRIVE(8, 1, 0x234, 3, 12),
364 };
365 
366 static uint32_t
367 rk3288_get_pd_offset(struct rk_pinctrl_softc *sc, uint32_t bank)
368 {
369 	if (bank == 0)
370 		return (0x064);		/* PMU */
371 	return (0x130);
372 }
373 
374 static struct syscon *
375 rk3288_get_syscon(struct rk_pinctrl_softc *sc, uint32_t bank)
376 {
377 	if (bank == 0)
378 		return (sc->pmu);
379 	return (sc->grf);
380 }
381 
382 static int
383 rk3288_parse_bias(phandle_t node, int bank)
384 {
385 	if (OF_hasprop(node, "bias-disable"))
386 		return (0);
387 	if (OF_hasprop(node, "bias-pull-up"))
388 		return (1);
389 	if (OF_hasprop(node, "bias-pull-down"))
390 		return (2);
391 
392 	return (-1);
393 }
394 
395 static int
396 rk3288_resolv_bias_value(int bank, int bias)
397 {
398 	int rv = 0;
399 
400 	if (bias == 1)
401 		rv = GPIO_PIN_PULLUP;
402 	else if (bias == 2)
403 		rv = GPIO_PIN_PULLDOWN;
404 
405 	return (rv);
406 }
407 
408 static int
409 rk3288_get_bias_value(int bank, int bias)
410 {
411 	int rv = 0;
412 
413 	if (bias & GPIO_PIN_PULLUP)
414 		rv = 1;
415 	else if (bias & GPIO_PIN_PULLDOWN)
416 		rv = 2;
417 
418 	return (rv);
419 }
420 
421 struct rk_pinctrl_conf rk3288_conf = {
422 	.iomux_conf = rk3288_iomux_bank,
423 	.iomux_nbanks = nitems(rk3288_iomux_bank),
424 	.pin_fixup = rk3288_pin_fixup,
425 	.npin_fixup = nitems(rk3288_pin_fixup),
426 	.pin_drive = rk3288_pin_drive,
427 	.npin_drive = nitems(rk3288_pin_drive),
428 	.gpio_bank = rk3288_gpio_bank,
429 	.ngpio_bank = nitems(rk3288_gpio_bank),
430 	.get_pd_offset = rk3288_get_pd_offset,
431 	.get_syscon = rk3288_get_syscon,
432 	.parse_bias = rk3288_parse_bias,
433 	.resolv_bias_value = rk3288_resolv_bias_value,
434 	.get_bias_value = rk3288_get_bias_value,
435 };
436 
437 static struct rk_pinctrl_gpio rk3328_gpio_bank[] = {
438 	RK_GPIO(0, "gpio0"),
439 	RK_GPIO(1, "gpio1"),
440 	RK_GPIO(2, "gpio2"),
441 	RK_GPIO(3, "gpio3"),
442 };
443 
444 static struct rk_pinctrl_bank rk3328_iomux_bank[] = {
445 	/*    bank sub offs nbits */
446 	RK_IOMUX(0, 0, 0x0000, 2),
447 	RK_IOMUX(0, 1, 0x0004, 2),
448 	RK_IOMUX(0, 2, 0x0008, 2),
449 	RK_IOMUX(0, 3, 0x000C, 2),
450 	RK_IOMUX(1, 0, 0x0010, 2),
451 	RK_IOMUX(1, 1, 0x0014, 2),
452 	RK_IOMUX(1, 2, 0x0018, 2),
453 	RK_IOMUX(1, 3, 0x001C, 2),
454 	RK_IOMUX(2, 0, 0x0020, 2),
455 	RK_IOMUX(2, 1, 0x0024, 3),
456 	RK_IOMUX(2, 2, 0x002c, 3),
457 	RK_IOMUX(2, 3, 0x0034, 2),
458 	RK_IOMUX(3, 0, 0x0038, 3),
459 	RK_IOMUX(3, 1, 0x0040, 3),
460 	RK_IOMUX(3, 2, 0x0048, 2),
461 	RK_IOMUX(3, 3, 0x004c, 2),
462 };
463 
464 static struct rk_pinctrl_pin_fixup rk3328_pin_fixup[] = {
465 	/*      bank  pin reg  bit  mask */
466 	RK_PINFIX(2, 12, 0x24,  8, 0x300),
467 	RK_PINFIX(2, 15, 0x28,  0, 0x7),
468 	RK_PINFIX(2, 23, 0x30, 14, 0x6000),
469 };
470 
471 
472 static struct rk_pinctrl_pin_drive rk3328_pin_drive[] = {
473 	/*       bank sub  offs val ma */
474 	RK_PINDRIVE(0, 0, 0x200, 0, 2),
475 	RK_PINDRIVE(0, 0, 0x200, 1, 4),
476 	RK_PINDRIVE(0, 0, 0x200, 2, 8),
477 	RK_PINDRIVE(0, 0, 0x200, 3, 12),
478 
479 	RK_PINDRIVE(0, 1, 0x204, 0, 2),
480 	RK_PINDRIVE(0, 1, 0x204, 1, 4),
481 	RK_PINDRIVE(0, 1, 0x204, 2, 8),
482 	RK_PINDRIVE(0, 1, 0x204, 3, 12),
483 
484 	RK_PINDRIVE(0, 2, 0x208, 0, 2),
485 	RK_PINDRIVE(0, 2, 0x208, 1, 4),
486 	RK_PINDRIVE(0, 2, 0x208, 2, 8),
487 	RK_PINDRIVE(0, 2, 0x208, 3, 12),
488 
489 	RK_PINDRIVE(0, 3, 0x20C, 0, 2),
490 	RK_PINDRIVE(0, 3, 0x20C, 1, 4),
491 	RK_PINDRIVE(0, 3, 0x20C, 2, 8),
492 	RK_PINDRIVE(0, 3, 0x20C, 3, 12),
493 
494 	RK_PINDRIVE(1, 0, 0x210, 0, 2),
495 	RK_PINDRIVE(1, 0, 0x210, 1, 4),
496 	RK_PINDRIVE(1, 0, 0x210, 2, 8),
497 	RK_PINDRIVE(1, 0, 0x210, 3, 12),
498 
499 	RK_PINDRIVE(1, 1, 0x214, 0, 2),
500 	RK_PINDRIVE(1, 1, 0x214, 1, 4),
501 	RK_PINDRIVE(1, 1, 0x214, 2, 8),
502 	RK_PINDRIVE(1, 1, 0x214, 3, 12),
503 
504 	RK_PINDRIVE(1, 2, 0x218, 0, 2),
505 	RK_PINDRIVE(1, 2, 0x218, 1, 4),
506 	RK_PINDRIVE(1, 2, 0x218, 2, 8),
507 	RK_PINDRIVE(1, 2, 0x218, 3, 12),
508 
509 	RK_PINDRIVE(1, 3, 0x21C, 0, 2),
510 	RK_PINDRIVE(1, 3, 0x21C, 1, 4),
511 	RK_PINDRIVE(1, 3, 0x21C, 2, 8),
512 	RK_PINDRIVE(1, 3, 0x21C, 3, 12),
513 
514 	RK_PINDRIVE(2, 0, 0x220, 0, 2),
515 	RK_PINDRIVE(2, 0, 0x220, 1, 4),
516 	RK_PINDRIVE(2, 0, 0x220, 2, 8),
517 	RK_PINDRIVE(2, 0, 0x220, 3, 12),
518 
519 	RK_PINDRIVE(2, 1, 0x224, 0, 2),
520 	RK_PINDRIVE(2, 1, 0x224, 1, 4),
521 	RK_PINDRIVE(2, 1, 0x224, 2, 8),
522 	RK_PINDRIVE(2, 1, 0x224, 3, 12),
523 
524 	RK_PINDRIVE(2, 2, 0x228, 0, 2),
525 	RK_PINDRIVE(2, 2, 0x228, 1, 4),
526 	RK_PINDRIVE(2, 2, 0x228, 2, 8),
527 	RK_PINDRIVE(2, 2, 0x228, 3, 12),
528 
529 	RK_PINDRIVE(2, 3, 0x22C, 0, 2),
530 	RK_PINDRIVE(2, 3, 0x22C, 1, 4),
531 	RK_PINDRIVE(2, 3, 0x22C, 2, 8),
532 	RK_PINDRIVE(2, 3, 0x22C, 3, 12),
533 
534 	RK_PINDRIVE(3, 0, 0x230, 0, 2),
535 	RK_PINDRIVE(3, 0, 0x230, 1, 4),
536 	RK_PINDRIVE(3, 0, 0x230, 2, 8),
537 	RK_PINDRIVE(3, 0, 0x230, 3, 12),
538 
539 	RK_PINDRIVE(3, 1, 0x234, 0, 2),
540 	RK_PINDRIVE(3, 1, 0x234, 1, 4),
541 	RK_PINDRIVE(3, 1, 0x234, 2, 8),
542 	RK_PINDRIVE(3, 1, 0x234, 3, 12),
543 
544 	RK_PINDRIVE(3, 2, 0x238, 0, 2),
545 	RK_PINDRIVE(3, 2, 0x238, 1, 4),
546 	RK_PINDRIVE(3, 2, 0x238, 2, 8),
547 	RK_PINDRIVE(3, 2, 0x238, 3, 12),
548 
549 	RK_PINDRIVE(3, 3, 0x23C, 0, 2),
550 	RK_PINDRIVE(3, 3, 0x23C, 1, 4),
551 	RK_PINDRIVE(3, 3, 0x23C, 2, 8),
552 	RK_PINDRIVE(3, 3, 0x23C, 3, 12),
553 };
554 
555 static uint32_t
556 rk3328_get_pd_offset(struct rk_pinctrl_softc *sc, uint32_t bank)
557 {
558 	return (0x100);
559 }
560 
561 static struct syscon *
562 rk3328_get_syscon(struct rk_pinctrl_softc *sc, uint32_t bank)
563 {
564 	return (sc->grf);
565 }
566 
567 struct rk_pinctrl_conf rk3328_conf = {
568 	.iomux_conf = rk3328_iomux_bank,
569 	.iomux_nbanks = nitems(rk3328_iomux_bank),
570 	.pin_fixup = rk3328_pin_fixup,
571 	.npin_fixup = nitems(rk3328_pin_fixup),
572 	.pin_drive = rk3328_pin_drive,
573 	.npin_drive = nitems(rk3328_pin_drive),
574 	.gpio_bank = rk3328_gpio_bank,
575 	.ngpio_bank = nitems(rk3328_gpio_bank),
576 	.get_pd_offset = rk3328_get_pd_offset,
577 	.get_syscon = rk3328_get_syscon,
578 	.parse_bias = rk3288_parse_bias,
579 	.resolv_bias_value = rk3288_resolv_bias_value,
580 	.get_bias_value = rk3288_get_bias_value,
581 };
582 
583 static struct rk_pinctrl_gpio rk3399_gpio_bank[] = {
584 	RK_GPIO(0, "gpio0"),
585 	RK_GPIO(1, "gpio1"),
586 	RK_GPIO(2, "gpio2"),
587 	RK_GPIO(3, "gpio3"),
588 	RK_GPIO(4, "gpio4"),
589 };
590 
591 static struct rk_pinctrl_bank rk3399_iomux_bank[] = {
592 	/*    bank sub  offs   nbits */
593 	RK_IOMUX(0, 0, 0x0000, 2),
594 	RK_IOMUX(0, 1, 0x0004, 2),
595 	RK_IOMUX(0, 2, 0x0008, 2),
596 	RK_IOMUX(0, 3, 0x000C, 2),
597 	RK_IOMUX(1, 0, 0x0010, 2),
598 	RK_IOMUX(1, 1, 0x0014, 2),
599 	RK_IOMUX(1, 2, 0x0018, 2),
600 	RK_IOMUX(1, 3, 0x001C, 2),
601 	RK_IOMUX(2, 0, 0xE000, 2),
602 	RK_IOMUX(2, 1, 0xE004, 2),
603 	RK_IOMUX(2, 2, 0xE008, 2),
604 	RK_IOMUX(2, 3, 0xE00C, 2),
605 	RK_IOMUX(3, 0, 0xE010, 2),
606 	RK_IOMUX(3, 1, 0xE014, 2),
607 	RK_IOMUX(3, 2, 0xE018, 2),
608 	RK_IOMUX(3, 3, 0xE01C, 2),
609 	RK_IOMUX(4, 0, 0xE020, 2),
610 	RK_IOMUX(4, 1, 0xE024, 2),
611 	RK_IOMUX(4, 2, 0xE028, 2),
612 	RK_IOMUX(4, 3, 0xE02C, 2),
613 };
614 
615 static struct rk_pinctrl_pin_fixup rk3399_pin_fixup[] = {};
616 
617 static struct rk_pinctrl_pin_drive rk3399_pin_drive[] = {
618 	/*       bank sub offs val ma */
619 	/* GPIO0A */
620 	RK_PINDRIVE(0, 0, 0x80, 0, 5),
621 	RK_PINDRIVE(0, 0, 0x80, 1, 10),
622 	RK_PINDRIVE(0, 0, 0x80, 2, 15),
623 	RK_PINDRIVE(0, 0, 0x80, 3, 20),
624 
625 	/* GPIOB */
626 	RK_PINDRIVE(0, 1, 0x88, 0, 5),
627 	RK_PINDRIVE(0, 1, 0x88, 1, 10),
628 	RK_PINDRIVE(0, 1, 0x88, 2, 15),
629 	RK_PINDRIVE(0, 1, 0x88, 3, 20),
630 
631 	/* GPIO1A */
632 	RK_PINDRIVE(1, 0, 0xA0, 0, 3),
633 	RK_PINDRIVE(1, 0, 0xA0, 1, 6),
634 	RK_PINDRIVE(1, 0, 0xA0, 2, 9),
635 	RK_PINDRIVE(1, 0, 0xA0, 3, 12),
636 
637 	/* GPIO1B */
638 	RK_PINDRIVE(1, 1, 0xA8, 0, 3),
639 	RK_PINDRIVE(1, 1, 0xA8, 1, 6),
640 	RK_PINDRIVE(1, 1, 0xA8, 2, 9),
641 	RK_PINDRIVE(1, 1, 0xA8, 3, 12),
642 
643 	/* GPIO1C */
644 	RK_PINDRIVE(1, 2, 0xB0, 0, 3),
645 	RK_PINDRIVE(1, 2, 0xB0, 1, 6),
646 	RK_PINDRIVE(1, 2, 0xB0, 2, 9),
647 	RK_PINDRIVE(1, 2, 0xB0, 3, 12),
648 
649 	/* GPIO1D */
650 	RK_PINDRIVE(1, 3, 0xB8, 0, 3),
651 	RK_PINDRIVE(1, 3, 0xB8, 1, 6),
652 	RK_PINDRIVE(1, 3, 0xB8, 2, 9),
653 	RK_PINDRIVE(1, 3, 0xB8, 3, 12),
654 };
655 
656 static uint32_t
657 rk3399_get_pd_offset(struct rk_pinctrl_softc *sc, uint32_t bank)
658 {
659 	if (bank < 2)
660 		return (0x40);
661 
662 	return (0xE040);
663 }
664 
665 static struct syscon *
666 rk3399_get_syscon(struct rk_pinctrl_softc *sc, uint32_t bank)
667 {
668 	if (bank < 2)
669 		return (sc->pmu);
670 
671 	return (sc->grf);
672 }
673 
674 static int
675 rk3399_parse_bias(phandle_t node, int bank)
676 {
677 	int pullup, pulldown;
678 
679 	if (OF_hasprop(node, "bias-disable"))
680 		return (0);
681 
682 	switch (bank) {
683 	case 0:
684 	case 2:
685 		pullup = 3;
686 		pulldown = 1;
687 		break;
688 	case 1:
689 	case 3:
690 	case 4:
691 		pullup = 1;
692 		pulldown = 2;
693 		break;
694 	}
695 
696 	if (OF_hasprop(node, "bias-pull-up"))
697 		return (pullup);
698 	if (OF_hasprop(node, "bias-pull-down"))
699 		return (pulldown);
700 
701 	return (-1);
702 }
703 
704 static int
705 rk3399_resolv_bias_value(int bank, int bias)
706 {
707 	int rv = 0;
708 
709 	switch (bank) {
710 	case 0:
711 	case 2:
712 		if (bias == 3)
713 			rv = GPIO_PIN_PULLUP;
714 		else if (bias == 1)
715 			rv = GPIO_PIN_PULLDOWN;
716 		break;
717 	case 1:
718 	case 3:
719 	case 4:
720 		if (bias == 1)
721 			rv = GPIO_PIN_PULLUP;
722 		else if (bias == 2)
723 			rv = GPIO_PIN_PULLDOWN;
724 		break;
725 	}
726 
727 	return (rv);
728 }
729 
730 static int
731 rk3399_get_bias_value(int bank, int bias)
732 {
733 	int rv = 0;
734 
735 	switch (bank) {
736 	case 0:
737 	case 2:
738 		if (bias & GPIO_PIN_PULLUP)
739 			rv = 3;
740 		else if (bias & GPIO_PIN_PULLDOWN)
741 			rv = 1;
742 		break;
743 	case 1:
744 	case 3:
745 	case 4:
746 		if (bias & GPIO_PIN_PULLUP)
747 			rv = 1;
748 		else if (bias & GPIO_PIN_PULLDOWN)
749 			rv = 2;
750 		break;
751 	}
752 
753 	return (rv);
754 }
755 
756 struct rk_pinctrl_conf rk3399_conf = {
757 	.iomux_conf = rk3399_iomux_bank,
758 	.iomux_nbanks = nitems(rk3399_iomux_bank),
759 	.pin_fixup = rk3399_pin_fixup,
760 	.npin_fixup = nitems(rk3399_pin_fixup),
761 	.pin_drive = rk3399_pin_drive,
762 	.npin_drive = nitems(rk3399_pin_drive),
763 	.gpio_bank = rk3399_gpio_bank,
764 	.ngpio_bank = nitems(rk3399_gpio_bank),
765 	.get_pd_offset = rk3399_get_pd_offset,
766 	.get_syscon = rk3399_get_syscon,
767 	.parse_bias = rk3399_parse_bias,
768 	.resolv_bias_value = rk3399_resolv_bias_value,
769 	.get_bias_value = rk3399_get_bias_value,
770 };
771 
772 static struct ofw_compat_data compat_data[] = {
773 	{"rockchip,rk3288-pinctrl", (uintptr_t)&rk3288_conf},
774 	{"rockchip,rk3328-pinctrl", (uintptr_t)&rk3328_conf},
775 	{"rockchip,rk3399-pinctrl", (uintptr_t)&rk3399_conf},
776 	{NULL,             0}
777 };
778 
779 static int
780 rk_pinctrl_parse_drive(struct rk_pinctrl_softc *sc, phandle_t node,
781   uint32_t bank, uint32_t subbank, uint32_t *drive, uint32_t *offset)
782 {
783 	uint32_t value;
784 	int i;
785 
786 	if (OF_getencprop(node, "drive-strength", &value,
787 	    sizeof(value)) != 0)
788 		return (-1);
789 
790 	/* Map to the correct drive value */
791 	for (i = 0; i < sc->conf->npin_drive; i++) {
792 		if (sc->conf->pin_drive[i].bank != bank &&
793 		    sc->conf->pin_drive[i].subbank != subbank)
794 			continue;
795 		if (sc->conf->pin_drive[i].ma == value) {
796 			*drive = sc->conf->pin_drive[i].value;
797 			return (0);
798 		}
799 	}
800 
801 	return (-1);
802 }
803 
804 static void
805 rk_pinctrl_get_fixup(struct rk_pinctrl_softc *sc, uint32_t bank, uint32_t pin,
806     uint32_t *reg, uint32_t *mask, uint32_t *bit)
807 {
808 	int i;
809 
810 	for (i = 0; i < sc->conf->npin_fixup; i++)
811 		if (sc->conf->pin_fixup[i].bank == bank &&
812 		    sc->conf->pin_fixup[i].pin == pin) {
813 			*reg = sc->conf->pin_fixup[i].reg;
814 			*mask = sc->conf->pin_fixup[i].mask;
815 			*bit = sc->conf->pin_fixup[i].bit;
816 
817 			return;
818 		}
819 }
820 
821 static int
822 rk_pinctrl_handle_io(struct rk_pinctrl_softc *sc, phandle_t node, uint32_t bank,
823 uint32_t pin)
824 {
825 	bool have_cfg, have_direction, have_value;
826 	uint32_t  direction_value, pin_value;
827 	struct rk_pinctrl_gpio *gpio;
828 	int i, rv;
829 
830 	have_cfg = false;
831 	have_direction = false;
832 	have_value = false;
833 
834 	/* Get (subset of) GPIO pin properties. */
835 	if (OF_hasprop(node, "output-disable")) {
836 		have_cfg = true;
837 		have_direction = true;
838 		direction_value = GPIO_PIN_INPUT;
839 	}
840 
841 	if (OF_hasprop(node, "output-enable")) {
842 		have_cfg = true;
843 		have_direction = true;
844 		direction_value = GPIO_PIN_OUTPUT;
845 	}
846 
847 	if (OF_hasprop(node, "output-low")) {
848 		have_cfg = true;
849 		have_direction = true;
850 		direction_value = GPIO_PIN_OUTPUT;
851 		have_value = true;
852 		pin_value = 0;
853 	}
854 
855 	if (OF_hasprop(node, "output-high")) {
856 		have_cfg = true;
857 		have_direction = true;
858 		direction_value = GPIO_PIN_OUTPUT;
859 		have_value = true;
860 		pin_value = 1;
861 	}
862 
863 	if (!have_cfg)
864 		return (0);
865 
866 	/* Find gpio */
867 	gpio = NULL;
868 	for(i = 0; i < sc->conf->ngpio_bank; i++) {
869 		if (bank ==  sc->conf->gpio_bank[i].bank) {
870 			gpio = sc->conf->gpio_bank + i;
871 			break;
872 		}
873 	}
874 	if (gpio == NULL) {
875 		device_printf(sc->dev, "Cannot find GPIO bank %d\n", bank);
876 		return (ENXIO);
877 	}
878 	if (gpio->gpio_dev == NULL) {
879 		device_printf(sc->dev,
880 		    "No GPIO subdevice found for bank %d\n", bank);
881 		return (ENXIO);
882 	}
883 
884 	rv = 0;
885 	if (have_value) {
886 		rv = GPIO_PIN_SET(gpio->gpio_dev, pin, pin_value);
887 		if (rv != 0) {
888 			device_printf(sc->dev, "Cannot set GPIO value: %d\n",
889 			    rv);
890 			return (rv);
891 		}
892 	}
893 
894 	if (have_direction) {
895 		rv = GPIO_PIN_SETFLAGS(gpio->gpio_dev, pin, direction_value);
896 		if (rv != 0) {
897 			device_printf(sc->dev,
898 			    "Cannot set GPIO direction: %d\n", rv);
899 			return (rv);
900 		}
901 	}
902 
903 	return (0);
904 }
905 
906 static void
907 rk_pinctrl_configure_pin(struct rk_pinctrl_softc *sc, uint32_t *pindata)
908 {
909 	phandle_t pin_conf;
910 	struct syscon *syscon;
911 	uint32_t bank, subbank, pin, function, bias;
912 	uint32_t bit, mask, reg, drive;
913 	int i, rv;
914 
915 	bank = pindata[0];
916 	pin = pindata[1];
917 	function = pindata[2];
918 	pin_conf = OF_node_from_xref(pindata[3]);
919 	subbank = pin / 8;
920 
921 	for (i = 0; i < sc->conf->iomux_nbanks; i++)
922 		if (sc->conf->iomux_conf[i].bank == bank &&
923 		    sc->conf->iomux_conf[i].subbank == subbank)
924 			break;
925 
926 	if (i == sc->conf->iomux_nbanks) {
927 		device_printf(sc->dev, "Unknown pin %d in bank %d\n", pin,
928 		    bank);
929 		return;
930 	}
931 
932 	/* Find syscon */
933 	syscon = sc->conf->get_syscon(sc, bank);
934 
935 	/* Setup GPIO properties first */
936 	rv = rk_pinctrl_handle_io(sc, pin_conf, bank, pin);
937 
938 	/* Then pin pull-up/down */
939 	bias = sc->conf->parse_bias(pin_conf, bank);
940 	if (bias >= 0) {
941 		reg = sc->conf->get_pd_offset(sc, bank);
942 		reg += bank * 0x10 + ((pin / 8) * 0x4);
943 		bit = (pin % 8) * 2;
944 		mask = (0x3 << bit);
945 		SYSCON_MODIFY_4(syscon, reg, mask, bias << bit | (mask << 16));
946 	}
947 
948 	/* Then drive strength */
949 	rv = rk_pinctrl_parse_drive(sc, pin_conf, bank, subbank, &drive, &reg);
950 	if (rv == 0) {
951 		bit = (pin % 8) * 2;
952 		mask = (0x3 << bit);
953 		SYSCON_MODIFY_4(syscon, reg, mask, drive << bit | (mask << 16));
954 	}
955 
956 	/* Finally set the pin function */
957 	reg = sc->conf->iomux_conf[i].offset;
958 	switch (sc->conf->iomux_conf[i].nbits) {
959 	case 4:
960 		if ((pin % 8) >= 4)
961 			reg += 0x4;
962 		bit = (pin % 4) * 4;
963 		mask = (0xF << bit);
964 		break;
965 	case 3:
966 		if ((pin % 8) >= 5)
967 			reg += 4;
968 		bit = (pin % 8 % 5) * 3;
969 		mask = (0x7 << bit);
970 		break;
971 	case 2:
972 		bit = (pin % 8) * 2;
973 		mask = (0x3 << bit);
974 		break;
975 	default:
976 		device_printf(sc->dev,
977 		    "Unknown pin stride width %d in bank %d\n",
978 		    sc->conf->iomux_conf[i].nbits, bank);
979 		return;
980 	}
981 	rk_pinctrl_get_fixup(sc, bank, pin, &reg, &mask, &bit);
982 
983 	/*
984 	 * NOTE: not all syscon registers uses hi-word write mask, thus
985 	 * register modify method should be used.
986 	 * XXXX We should not pass write mask to syscon register
987 	 * without hi-word write mask.
988 	 */
989 	SYSCON_MODIFY_4(syscon, reg, mask, function << bit | (mask << 16));
990 }
991 
992 static int
993 rk_pinctrl_configure_pins(device_t dev, phandle_t cfgxref)
994 {
995 	struct rk_pinctrl_softc *sc;
996 	phandle_t node;
997 	uint32_t *pins;
998 	int i, npins;
999 
1000 	sc = device_get_softc(dev);
1001 	node = OF_node_from_xref(cfgxref);
1002 
1003 	npins = OF_getencprop_alloc_multi(node, "rockchip,pins",  sizeof(*pins),
1004 	    (void **)&pins);
1005 	if (npins <= 0)
1006 		return (ENOENT);
1007 
1008 	for (i = 0; i != npins; i += 4)
1009 		rk_pinctrl_configure_pin(sc, pins + i);
1010 
1011 	return (0);
1012 }
1013 
1014 static int
1015 rk_pinctrl_is_gpio_locked(struct rk_pinctrl_softc *sc, struct syscon *syscon,
1016   int bank, uint32_t pin, bool *is_gpio)
1017 {
1018 	uint32_t subbank, bit, mask, reg;
1019 	uint32_t pinfunc;
1020 	int i;
1021 
1022 	RK_PINCTRL_LOCK_ASSERT(sc);
1023 
1024 	subbank = pin / 8;
1025 	*is_gpio = false;
1026 
1027 	for (i = 0; i < sc->conf->iomux_nbanks; i++)
1028 		if (sc->conf->iomux_conf[i].bank == bank &&
1029 		    sc->conf->iomux_conf[i].subbank == subbank)
1030 			break;
1031 
1032 	if (i == sc->conf->iomux_nbanks) {
1033 		device_printf(sc->dev, "Unknown pin %d in bank %d\n", pin,
1034 		    bank);
1035 		return (EINVAL);
1036 	}
1037 
1038 	syscon = sc->conf->get_syscon(sc, bank);
1039 
1040 	/* Parse pin function */
1041 	reg = sc->conf->iomux_conf[i].offset;
1042 	switch (sc->conf->iomux_conf[i].nbits) {
1043 	case 4:
1044 		if ((pin % 8) >= 4)
1045 			reg += 0x4;
1046 		bit = (pin % 4) * 4;
1047 		mask = (0xF << bit);
1048 		break;
1049 	case 3:
1050 		if ((pin % 8) >= 5)
1051 			reg += 4;
1052 		bit = (pin % 8 % 5) * 3;
1053 		mask = (0x7 << bit);
1054 		break;
1055 	case 2:
1056 		bit = (pin % 8) * 2;
1057 		mask = (0x3 << bit);
1058 		break;
1059 	default:
1060 		device_printf(sc->dev,
1061 		    "Unknown pin stride width %d in bank %d\n",
1062 		    sc->conf->iomux_conf[i].nbits, bank);
1063 		return (EINVAL);
1064 	}
1065 	rk_pinctrl_get_fixup(sc, bank, pin, &reg, &mask, &bit);
1066 
1067 	reg = SYSCON_READ_4(syscon, reg);
1068 	pinfunc = (reg & mask) >> bit;
1069 
1070 	/* Test if the pin is in gpio mode */
1071 	if (pinfunc == 0)
1072 		*is_gpio = true;
1073 
1074 	return (0);
1075 }
1076 
1077 static int
1078 rk_pinctrl_get_bank(struct rk_pinctrl_softc *sc, device_t gpio, int *bank)
1079 {
1080 	int i;
1081 
1082 	for (i = 0; i < sc->conf->ngpio_bank; i++) {
1083 		if (sc->conf->gpio_bank[i].gpio_dev == gpio)
1084 			break;
1085 	}
1086 	if (i == sc->conf->ngpio_bank)
1087 		return (EINVAL);
1088 
1089 	*bank = i;
1090 	return (0);
1091 }
1092 
1093 static int
1094 rk_pinctrl_is_gpio(device_t pinctrl, device_t gpio, uint32_t pin, bool *is_gpio)
1095 {
1096 	struct rk_pinctrl_softc *sc;
1097 	struct syscon *syscon;
1098 	int bank;
1099 	int rv;
1100 
1101 	sc = device_get_softc(pinctrl);
1102 	RK_PINCTRL_LOCK(sc);
1103 
1104 	rv = rk_pinctrl_get_bank(sc, gpio, &bank);
1105 	if (rv != 0)
1106 		goto done;
1107 	syscon = sc->conf->get_syscon(sc, bank);
1108 	rv = rk_pinctrl_is_gpio_locked(sc, syscon, bank, pin, is_gpio);
1109 
1110 done:
1111 	RK_PINCTRL_UNLOCK(sc);
1112 
1113 	return (rv);
1114 }
1115 
1116 static int
1117 rk_pinctrl_get_flags(device_t pinctrl, device_t gpio, uint32_t pin,
1118     uint32_t *flags)
1119 {
1120 	struct rk_pinctrl_softc *sc;
1121 	struct syscon *syscon;
1122 	uint32_t reg, mask, bit;
1123 	uint32_t bias;
1124 	int bank;
1125 	int rv = 0;
1126 	bool is_gpio;
1127 
1128 	sc = device_get_softc(pinctrl);
1129 	RK_PINCTRL_LOCK(sc);
1130 
1131 	rv = rk_pinctrl_get_bank(sc, gpio, &bank);
1132 	if (rv != 0)
1133 		goto done;
1134 	syscon = sc->conf->get_syscon(sc, bank);
1135 	rv = rk_pinctrl_is_gpio_locked(sc, syscon, bank, pin, &is_gpio);
1136 	if (rv != 0)
1137 		goto done;
1138 	if (!is_gpio) {
1139 		rv = EINVAL;
1140 		goto done;
1141 	}
1142 	/* Get the pullup/pulldown configuration */
1143 	reg = sc->conf->get_pd_offset(sc, bank);
1144 	reg += bank * 0x10 + ((pin / 8) * 0x4);
1145 	bit = (pin % 8) * 2;
1146 	mask = (0x3 << bit) << 16;
1147 	reg = SYSCON_READ_4(syscon, reg);
1148 	reg = (reg >> bit) & 0x3;
1149 	bias = sc->conf->resolv_bias_value(bank, reg);
1150 	*flags = bias;
1151 
1152 done:
1153 	RK_PINCTRL_UNLOCK(sc);
1154 	return (rv);
1155 }
1156 
1157 static int
1158 rk_pinctrl_set_flags(device_t pinctrl, device_t gpio, uint32_t pin,
1159     uint32_t flags)
1160 {
1161 	struct rk_pinctrl_softc *sc;
1162 	struct syscon *syscon;
1163 	uint32_t bit, mask, reg;
1164 	uint32_t bias;
1165 	int bank;
1166 	int rv = 0;
1167 	bool is_gpio;
1168 
1169 	sc = device_get_softc(pinctrl);
1170 	RK_PINCTRL_LOCK(sc);
1171 
1172 	rv = rk_pinctrl_get_bank(sc, gpio, &bank);
1173 	if (rv != 0)
1174 		goto done;
1175 	syscon = sc->conf->get_syscon(sc, bank);
1176 	rv = rk_pinctrl_is_gpio_locked(sc, syscon, bank, pin, &is_gpio);
1177 	if (rv != 0)
1178 		goto done;
1179 	if (!is_gpio) {
1180 		rv = EINVAL;
1181 		goto done;
1182 	}
1183 	/* Get the pullup/pulldown configuration */
1184 	reg = sc->conf->get_pd_offset(sc, bank);
1185 	reg += bank * 0x10 + ((pin / 8) * 0x4);
1186 	bit = (pin % 8) * 2;
1187 	mask = (0x3 << bit);
1188 	bias = sc->conf->get_bias_value(bank, flags);
1189 	SYSCON_MODIFY_4(syscon, reg, mask, bias << bit | (mask << 16));
1190 
1191 done:
1192 	RK_PINCTRL_UNLOCK(sc);
1193 	return (rv);
1194 }
1195 
1196 static int
1197 rk_pinctrl_register_gpio(struct rk_pinctrl_softc *sc, char *gpio_name,
1198     device_t gpio_dev)
1199 {
1200 	int i;
1201 
1202 	for(i = 0; i < sc->conf->ngpio_bank; i++) {
1203 		if (strcmp(gpio_name, sc->conf->gpio_bank[i].gpio_name) != 0)
1204 			continue;
1205 		sc->conf->gpio_bank[i].gpio_dev = gpio_dev;
1206 		return(0);
1207 	}
1208 	return (ENXIO);
1209 }
1210 
1211 static int
1212 rk_pinctrl_probe(device_t dev)
1213 {
1214 
1215 	if (!ofw_bus_status_okay(dev))
1216 		return (ENXIO);
1217 
1218 	if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
1219 		return (ENXIO);
1220 
1221 	device_set_desc(dev, "RockChip Pinctrl controller");
1222 	return (BUS_PROBE_DEFAULT);
1223 }
1224 
1225 static int
1226 rk_pinctrl_attach(device_t dev)
1227 {
1228 	struct rk_pinctrl_softc *sc;
1229 	phandle_t node;
1230 	device_t cdev;
1231 	char *gpio_name, *eptr;
1232 	int rv;
1233 
1234 	sc = device_get_softc(dev);
1235 	sc->dev = dev;
1236 
1237 	node = ofw_bus_get_node(dev);
1238 
1239 	if (OF_hasprop(node, "rockchip,grf") &&
1240 	    syscon_get_by_ofw_property(dev, node,
1241 	    "rockchip,grf", &sc->grf) != 0) {
1242 		device_printf(dev, "cannot get grf driver handle\n");
1243 		return (ENXIO);
1244 	}
1245 
1246 	/* RK3399,RK3288 has banks in PMU. RK3328 does not have a PMU. */
1247 	if (ofw_bus_node_is_compatible(node, "rockchip,rk3399-pinctrl") ||
1248 	    ofw_bus_node_is_compatible(node, "rockchip,rk3288-pinctrl")) {
1249 		if (OF_hasprop(node, "rockchip,pmu") &&
1250 		    syscon_get_by_ofw_property(dev, node,
1251 		    "rockchip,pmu", &sc->pmu) != 0) {
1252 			device_printf(dev, "cannot get pmu driver handle\n");
1253 			return (ENXIO);
1254 		}
1255 	}
1256 
1257 	mtx_init(&sc->mtx, "rk pinctrl", "pinctrl", MTX_SPIN);
1258 
1259 	sc->conf = (struct rk_pinctrl_conf *)ofw_bus_search_compatible(dev,
1260 	    compat_data)->ocd_data;
1261 
1262 	fdt_pinctrl_register(dev, "rockchip,pins");
1263 
1264 	simplebus_init(dev, node);
1265 
1266 	bus_generic_probe(dev);
1267 
1268 	/* Attach child devices */
1269 	for (node = OF_child(node); node > 0; node = OF_peer(node)) {
1270 		if (!ofw_bus_node_is_compatible(node, "rockchip,gpio-bank"))
1271 			continue;
1272 
1273 		rv = OF_getprop_alloc(node, "name", (void **)&gpio_name);
1274 		if (rv <= 0) {
1275 			device_printf(sc->dev, "Cannot GPIO subdevice name.\n");
1276 			continue;
1277 		}
1278 
1279 		cdev = simplebus_add_device(dev, node, 0, NULL, -1, NULL);
1280 		if (cdev == NULL) {
1281 			device_printf(dev, " Cannot add GPIO subdevice: %s\n",
1282 			    gpio_name);
1283 			OF_prop_free(gpio_name);
1284 			continue;
1285 		}
1286 
1287 		rv = device_probe_and_attach(cdev);
1288 		if (rv != 0) {
1289 			device_printf(sc->dev,
1290 			    "Cannot attach GPIO subdevice: %s\n", gpio_name);
1291 			OF_prop_free(gpio_name);
1292 			continue;
1293 		}
1294 
1295 		/* Grep device name from name property */
1296 		eptr = gpio_name;
1297 		strsep(&eptr, "@");
1298 		if (gpio_name == eptr) {
1299 			device_printf(sc->dev,
1300 			    "Unrecognized format of GPIO subdevice name: %s\n",
1301 			    gpio_name);
1302 			OF_prop_free(gpio_name);
1303 			continue;
1304 		}
1305 		rv =  rk_pinctrl_register_gpio(sc, gpio_name, cdev);
1306 		if (rv != 0) {
1307 			device_printf(sc->dev,
1308 			    "Cannot register GPIO subdevice %s: %d\n",
1309 			    gpio_name, rv);
1310 			OF_prop_free(gpio_name);
1311 			continue;
1312 		}
1313 		OF_prop_free(gpio_name);
1314 	}
1315 
1316 	fdt_pinctrl_configure_tree(dev);
1317 
1318 	return (bus_generic_attach(dev));
1319 }
1320 
1321 static int
1322 rk_pinctrl_detach(device_t dev)
1323 {
1324 
1325 	return (EBUSY);
1326 }
1327 
1328 static device_method_t rk_pinctrl_methods[] = {
1329 	/* Device interface */
1330 	DEVMETHOD(device_probe,			rk_pinctrl_probe),
1331 	DEVMETHOD(device_attach,		rk_pinctrl_attach),
1332 	DEVMETHOD(device_detach,		rk_pinctrl_detach),
1333 
1334         /* fdt_pinctrl interface */
1335 	DEVMETHOD(fdt_pinctrl_configure,	rk_pinctrl_configure_pins),
1336 	DEVMETHOD(fdt_pinctrl_is_gpio,		rk_pinctrl_is_gpio),
1337 	DEVMETHOD(fdt_pinctrl_get_flags,	rk_pinctrl_get_flags),
1338 	DEVMETHOD(fdt_pinctrl_set_flags,	rk_pinctrl_set_flags),
1339 
1340 	DEVMETHOD_END
1341 };
1342 
1343 static devclass_t rk_pinctrl_devclass;
1344 
1345 DEFINE_CLASS_1(rk_pinctrl, rk_pinctrl_driver, rk_pinctrl_methods,
1346     sizeof(struct rk_pinctrl_softc), simplebus_driver);
1347 
1348 EARLY_DRIVER_MODULE(rk_pinctrl, simplebus, rk_pinctrl_driver,
1349     rk_pinctrl_devclass, 0, 0, BUS_PASS_INTERRUPT + BUS_PASS_ORDER_MIDDLE);
1350 MODULE_VERSION(rk_pinctrl, 1);
1351