1 /*- 2 * Copyright (c) 2009 Silicon Graphics International Corp. 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions, and the following disclaimer, 10 * without modification. 11 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 12 * substantially similar to the "NO WARRANTY" disclaimer below 13 * ("Disclaimer") and any redistribution must be conditioned upon 14 * including a substantially similar Disclaimer requirement for further 15 * binary redistribution. 16 * 17 * NO WARRANTY 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 19 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 20 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 21 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 22 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 26 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 27 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGES. 29 * 30 * $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl_frontend_cam_sim.c#4 $ 31 */ 32 /* 33 * CTL frontend to CAM SIM interface. This allows access to CTL LUNs via 34 * the da(4) and pass(4) drivers from inside the system. 35 * 36 * Author: Ken Merry <ken@FreeBSD.org> 37 */ 38 39 #include <sys/cdefs.h> 40 __FBSDID("$FreeBSD$"); 41 42 #include <sys/param.h> 43 #include <sys/systm.h> 44 #include <sys/kernel.h> 45 #include <sys/types.h> 46 #include <sys/malloc.h> 47 #include <sys/lock.h> 48 #include <sys/mutex.h> 49 #include <sys/condvar.h> 50 #include <sys/queue.h> 51 #include <sys/bus.h> 52 #include <sys/sysctl.h> 53 #include <machine/bus.h> 54 #include <sys/sbuf.h> 55 56 #include <cam/cam.h> 57 #include <cam/cam_ccb.h> 58 #include <cam/cam_sim.h> 59 #include <cam/cam_xpt_sim.h> 60 #include <cam/cam_xpt.h> 61 #include <cam/cam_periph.h> 62 #include <cam/scsi/scsi_all.h> 63 #include <cam/scsi/scsi_message.h> 64 #include <cam/ctl/ctl_io.h> 65 #include <cam/ctl/ctl.h> 66 #include <cam/ctl/ctl_frontend.h> 67 #include <cam/ctl/ctl_debug.h> 68 69 #define io_ptr spriv_ptr1 70 71 struct cfcs_io { 72 union ccb *ccb; 73 }; 74 75 struct cfcs_softc { 76 struct ctl_port port; 77 char port_name[32]; 78 struct cam_sim *sim; 79 struct cam_devq *devq; 80 struct cam_path *path; 81 struct mtx lock; 82 uint64_t wwnn; 83 uint64_t wwpn; 84 uint32_t cur_tag_num; 85 int online; 86 }; 87 88 /* 89 * We can't handle CCBs with these flags. For the most part, we just don't 90 * handle physical addresses yet. That would require mapping things in 91 * order to do the copy. 92 */ 93 #define CFCS_BAD_CCB_FLAGS (CAM_DATA_ISPHYS | CAM_MSG_BUF_PHYS | \ 94 CAM_SNS_BUF_PHYS | CAM_CDB_PHYS | CAM_SENSE_PTR | \ 95 CAM_SENSE_PHYS) 96 97 int cfcs_init(void); 98 static void cfcs_poll(struct cam_sim *sim); 99 static void cfcs_online(void *arg); 100 static void cfcs_offline(void *arg); 101 static void cfcs_datamove(union ctl_io *io); 102 static void cfcs_done(union ctl_io *io); 103 void cfcs_action(struct cam_sim *sim, union ccb *ccb); 104 static void cfcs_async(void *callback_arg, uint32_t code, 105 struct cam_path *path, void *arg); 106 107 struct cfcs_softc cfcs_softc; 108 /* 109 * This is primarly intended to allow for error injection to test the CAM 110 * sense data and sense residual handling code. This sets the maximum 111 * amount of SCSI sense data that we will report to CAM. 112 */ 113 static int cfcs_max_sense = sizeof(struct scsi_sense_data); 114 115 SYSCTL_NODE(_kern_cam, OID_AUTO, ctl2cam, CTLFLAG_RD, 0, 116 "CAM Target Layer SIM frontend"); 117 SYSCTL_INT(_kern_cam_ctl2cam, OID_AUTO, max_sense, CTLFLAG_RW, 118 &cfcs_max_sense, 0, "Maximum sense data size"); 119 120 static struct ctl_frontend cfcs_frontend = 121 { 122 .name = "camsim", 123 .init = cfcs_init, 124 }; 125 CTL_FRONTEND_DECLARE(ctlcfcs, cfcs_frontend); 126 127 int 128 cfcs_init(void) 129 { 130 struct cfcs_softc *softc; 131 struct ccb_setasync csa; 132 struct ctl_port *port; 133 int retval; 134 135 softc = &cfcs_softc; 136 bzero(softc, sizeof(*softc)); 137 mtx_init(&softc->lock, "ctl2cam", NULL, MTX_DEF); 138 port = &softc->port; 139 140 port->frontend = &cfcs_frontend; 141 port->port_type = CTL_PORT_INTERNAL; 142 /* XXX KDM what should the real number be here? */ 143 port->num_requested_ctl_io = 4096; 144 snprintf(softc->port_name, sizeof(softc->port_name), "camsim"); 145 port->port_name = softc->port_name; 146 port->port_online = cfcs_online; 147 port->port_offline = cfcs_offline; 148 port->onoff_arg = softc; 149 port->fe_datamove = cfcs_datamove; 150 port->fe_done = cfcs_done; 151 152 /* XXX KDM what should we report here? */ 153 /* XXX These should probably be fetched from CTL. */ 154 port->max_targets = 1; 155 port->max_target_id = 15; 156 port->targ_port = -1; 157 158 retval = ctl_port_register(port); 159 if (retval != 0) { 160 printf("%s: ctl_port_register() failed with error %d!\n", 161 __func__, retval); 162 mtx_destroy(&softc->lock); 163 return (retval); 164 } 165 166 /* 167 * If the CTL frontend didn't tell us what our WWNN/WWPN is, go 168 * ahead and set something random. 169 */ 170 if (port->wwnn == 0) { 171 uint64_t random_bits; 172 173 arc4rand(&random_bits, sizeof(random_bits), 0); 174 softc->wwnn = (random_bits & 0x0000000fffffff00ULL) | 175 /* Company ID */ 0x5000000000000000ULL | 176 /* NL-Port */ 0x0300; 177 softc->wwpn = softc->wwnn + port->targ_port + 1; 178 ctl_port_set_wwns(port, true, softc->wwnn, true, softc->wwpn); 179 } else { 180 softc->wwnn = port->wwnn; 181 softc->wwpn = port->wwpn; 182 } 183 184 mtx_lock(&softc->lock); 185 softc->devq = cam_simq_alloc(port->num_requested_ctl_io); 186 if (softc->devq == NULL) { 187 printf("%s: error allocating devq\n", __func__); 188 retval = ENOMEM; 189 goto bailout; 190 } 191 192 softc->sim = cam_sim_alloc(cfcs_action, cfcs_poll, softc->port_name, 193 softc, /*unit*/ 0, &softc->lock, 1, 194 port->num_requested_ctl_io, softc->devq); 195 if (softc->sim == NULL) { 196 printf("%s: error allocating SIM\n", __func__); 197 retval = ENOMEM; 198 goto bailout; 199 } 200 201 if (xpt_bus_register(softc->sim, NULL, 0) != CAM_SUCCESS) { 202 printf("%s: error registering SIM\n", __func__); 203 retval = ENOMEM; 204 goto bailout; 205 } 206 207 if (xpt_create_path(&softc->path, /*periph*/NULL, 208 cam_sim_path(softc->sim), 209 CAM_TARGET_WILDCARD, 210 CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 211 printf("%s: error creating path\n", __func__); 212 xpt_bus_deregister(cam_sim_path(softc->sim)); 213 retval = EINVAL; 214 goto bailout; 215 } 216 217 xpt_setup_ccb(&csa.ccb_h, softc->path, CAM_PRIORITY_NONE); 218 csa.ccb_h.func_code = XPT_SASYNC_CB; 219 csa.event_enable = AC_LOST_DEVICE; 220 csa.callback = cfcs_async; 221 csa.callback_arg = softc->sim; 222 xpt_action((union ccb *)&csa); 223 224 mtx_unlock(&softc->lock); 225 226 return (retval); 227 228 bailout: 229 if (softc->sim) 230 cam_sim_free(softc->sim, /*free_devq*/ TRUE); 231 else if (softc->devq) 232 cam_simq_free(softc->devq); 233 mtx_unlock(&softc->lock); 234 mtx_destroy(&softc->lock); 235 236 return (retval); 237 } 238 239 static void 240 cfcs_poll(struct cam_sim *sim) 241 { 242 243 } 244 245 static void 246 cfcs_onoffline(void *arg, int online) 247 { 248 struct cfcs_softc *softc; 249 union ccb *ccb; 250 251 softc = (struct cfcs_softc *)arg; 252 253 mtx_lock(&softc->lock); 254 softc->online = online; 255 256 ccb = xpt_alloc_ccb_nowait(); 257 if (ccb == NULL) { 258 printf("%s: unable to allocate CCB for rescan\n", __func__); 259 goto bailout; 260 } 261 262 if (xpt_create_path(&ccb->ccb_h.path, NULL, 263 cam_sim_path(softc->sim), CAM_TARGET_WILDCARD, 264 CAM_LUN_WILDCARD) != CAM_REQ_CMP) { 265 printf("%s: can't allocate path for rescan\n", __func__); 266 xpt_free_ccb(ccb); 267 goto bailout; 268 } 269 xpt_rescan(ccb); 270 271 bailout: 272 mtx_unlock(&softc->lock); 273 } 274 275 static void 276 cfcs_online(void *arg) 277 { 278 cfcs_onoffline(arg, /*online*/ 1); 279 } 280 281 static void 282 cfcs_offline(void *arg) 283 { 284 cfcs_onoffline(arg, /*online*/ 0); 285 } 286 287 /* 288 * This function is very similar to ctl_ioctl_do_datamove(). Is there a 289 * way to combine the functionality? 290 * 291 * XXX KDM may need to move this into a thread. We're doing a bcopy in the 292 * caller's context, which will usually be the backend. That may not be a 293 * good thing. 294 */ 295 static void 296 cfcs_datamove(union ctl_io *io) 297 { 298 union ccb *ccb; 299 bus_dma_segment_t cam_sg_entry, *cam_sglist; 300 struct ctl_sg_entry ctl_sg_entry, *ctl_sglist; 301 int cam_sg_count, ctl_sg_count, cam_sg_start; 302 int cam_sg_offset; 303 int len_to_copy, len_copied; 304 int ctl_watermark, cam_watermark; 305 int i, j; 306 307 308 cam_sg_offset = 0; 309 cam_sg_start = 0; 310 311 ccb = io->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptr; 312 313 /* 314 * Note that we have a check in cfcs_action() to make sure that any 315 * CCBs with "bad" flags are returned with CAM_REQ_INVALID. This 316 * is just to make sure no one removes that check without updating 317 * this code to provide the additional functionality necessary to 318 * support those modes of operation. 319 */ 320 KASSERT(((ccb->ccb_h.flags & CFCS_BAD_CCB_FLAGS) == 0), ("invalid " 321 "CAM flags %#x", (ccb->ccb_h.flags & CFCS_BAD_CCB_FLAGS))); 322 323 /* 324 * Simplify things on both sides by putting single buffers into a 325 * single entry S/G list. 326 */ 327 switch ((ccb->ccb_h.flags & CAM_DATA_MASK)) { 328 case CAM_DATA_SG: { 329 int len_seen; 330 331 cam_sglist = (bus_dma_segment_t *)ccb->csio.data_ptr; 332 cam_sg_count = ccb->csio.sglist_cnt; 333 334 for (i = 0, len_seen = 0; i < cam_sg_count; i++) { 335 if ((len_seen + cam_sglist[i].ds_len) >= 336 io->scsiio.kern_rel_offset) { 337 cam_sg_start = i; 338 cam_sg_offset = io->scsiio.kern_rel_offset - 339 len_seen; 340 break; 341 } 342 len_seen += cam_sglist[i].ds_len; 343 } 344 break; 345 } 346 case CAM_DATA_VADDR: 347 cam_sglist = &cam_sg_entry; 348 cam_sglist[0].ds_len = ccb->csio.dxfer_len; 349 cam_sglist[0].ds_addr = (bus_addr_t)ccb->csio.data_ptr; 350 cam_sg_count = 1; 351 cam_sg_start = 0; 352 cam_sg_offset = io->scsiio.kern_rel_offset; 353 break; 354 default: 355 panic("Invalid CAM flags %#x", ccb->ccb_h.flags); 356 } 357 358 if (io->scsiio.kern_sg_entries > 0) { 359 ctl_sglist = (struct ctl_sg_entry *)io->scsiio.kern_data_ptr; 360 ctl_sg_count = io->scsiio.kern_sg_entries; 361 } else { 362 ctl_sglist = &ctl_sg_entry; 363 ctl_sglist->addr = io->scsiio.kern_data_ptr; 364 ctl_sglist->len = io->scsiio.kern_data_len; 365 ctl_sg_count = 1; 366 } 367 368 ctl_watermark = 0; 369 cam_watermark = cam_sg_offset; 370 len_copied = 0; 371 for (i = cam_sg_start, j = 0; 372 i < cam_sg_count && j < ctl_sg_count;) { 373 uint8_t *cam_ptr, *ctl_ptr; 374 375 len_to_copy = MIN(cam_sglist[i].ds_len - cam_watermark, 376 ctl_sglist[j].len - ctl_watermark); 377 378 cam_ptr = (uint8_t *)cam_sglist[i].ds_addr; 379 cam_ptr = cam_ptr + cam_watermark; 380 if (io->io_hdr.flags & CTL_FLAG_BUS_ADDR) { 381 /* 382 * XXX KDM fix this! 383 */ 384 panic("need to implement bus address support"); 385 #if 0 386 kern_ptr = bus_to_virt(kern_sglist[j].addr); 387 #endif 388 } else 389 ctl_ptr = (uint8_t *)ctl_sglist[j].addr; 390 ctl_ptr = ctl_ptr + ctl_watermark; 391 392 ctl_watermark += len_to_copy; 393 cam_watermark += len_to_copy; 394 395 if ((io->io_hdr.flags & CTL_FLAG_DATA_MASK) == 396 CTL_FLAG_DATA_IN) { 397 CTL_DEBUG_PRINT(("%s: copying %d bytes to CAM\n", 398 __func__, len_to_copy)); 399 CTL_DEBUG_PRINT(("%s: from %p to %p\n", ctl_ptr, 400 __func__, cam_ptr)); 401 bcopy(ctl_ptr, cam_ptr, len_to_copy); 402 } else { 403 CTL_DEBUG_PRINT(("%s: copying %d bytes from CAM\n", 404 __func__, len_to_copy)); 405 CTL_DEBUG_PRINT(("%s: from %p to %p\n", cam_ptr, 406 __func__, ctl_ptr)); 407 bcopy(cam_ptr, ctl_ptr, len_to_copy); 408 } 409 410 len_copied += len_to_copy; 411 412 if (cam_sglist[i].ds_len == cam_watermark) { 413 i++; 414 cam_watermark = 0; 415 } 416 417 if (ctl_sglist[j].len == ctl_watermark) { 418 j++; 419 ctl_watermark = 0; 420 } 421 } 422 423 io->scsiio.ext_data_filled += len_copied; 424 425 if ((io->io_hdr.status & CTL_STATUS_MASK) == CTL_SUCCESS) { 426 io->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptr = NULL; 427 io->io_hdr.flags |= CTL_FLAG_STATUS_SENT; 428 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 429 ccb->ccb_h.status |= CAM_REQ_CMP; 430 xpt_done(ccb); 431 } 432 433 io->scsiio.be_move_done(io); 434 } 435 436 static void 437 cfcs_done(union ctl_io *io) 438 { 439 union ccb *ccb; 440 441 ccb = io->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptr; 442 if (ccb == NULL) { 443 ctl_free_io(io); 444 return; 445 } 446 447 /* 448 * At this point we should have status. If we don't, that's a bug. 449 */ 450 KASSERT(((io->io_hdr.status & CTL_STATUS_MASK) != CTL_STATUS_NONE), 451 ("invalid CTL status %#x", io->io_hdr.status)); 452 453 /* 454 * Translate CTL status to CAM status. 455 */ 456 ccb->ccb_h.status &= ~CAM_STATUS_MASK; 457 switch (io->io_hdr.status & CTL_STATUS_MASK) { 458 case CTL_SUCCESS: 459 ccb->ccb_h.status |= CAM_REQ_CMP; 460 break; 461 case CTL_SCSI_ERROR: 462 ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR | CAM_AUTOSNS_VALID; 463 ccb->csio.scsi_status = io->scsiio.scsi_status; 464 bcopy(&io->scsiio.sense_data, &ccb->csio.sense_data, 465 min(io->scsiio.sense_len, ccb->csio.sense_len)); 466 if (ccb->csio.sense_len > io->scsiio.sense_len) 467 ccb->csio.sense_resid = ccb->csio.sense_len - 468 io->scsiio.sense_len; 469 else 470 ccb->csio.sense_resid = 0; 471 if ((ccb->csio.sense_len - ccb->csio.sense_resid) > 472 cfcs_max_sense) { 473 ccb->csio.sense_resid = ccb->csio.sense_len - 474 cfcs_max_sense; 475 } 476 break; 477 case CTL_CMD_ABORTED: 478 ccb->ccb_h.status |= CAM_REQ_ABORTED; 479 break; 480 case CTL_ERROR: 481 default: 482 ccb->ccb_h.status |= CAM_REQ_CMP_ERR; 483 break; 484 } 485 if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP && 486 (ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) { 487 xpt_freeze_devq(ccb->ccb_h.path, 1); 488 ccb->ccb_h.status |= CAM_DEV_QFRZN; 489 } 490 xpt_done(ccb); 491 ctl_free_io(io); 492 } 493 494 void 495 cfcs_action(struct cam_sim *sim, union ccb *ccb) 496 { 497 struct cfcs_softc *softc; 498 int err; 499 500 softc = (struct cfcs_softc *)cam_sim_softc(sim); 501 mtx_assert(&softc->lock, MA_OWNED); 502 503 switch (ccb->ccb_h.func_code) { 504 case XPT_SCSI_IO: { 505 union ctl_io *io; 506 struct ccb_scsiio *csio; 507 508 csio = &ccb->csio; 509 510 /* 511 * Catch CCB flags, like physical address flags, that 512 * indicate situations we currently can't handle. 513 */ 514 if (ccb->ccb_h.flags & CFCS_BAD_CCB_FLAGS) { 515 ccb->ccb_h.status = CAM_REQ_INVALID; 516 printf("%s: bad CCB flags %#x (all flags %#x)\n", 517 __func__, ccb->ccb_h.flags & CFCS_BAD_CCB_FLAGS, 518 ccb->ccb_h.flags); 519 xpt_done(ccb); 520 return; 521 } 522 523 /* 524 * If we aren't online, there are no devices to see. 525 */ 526 if (softc->online == 0) { 527 ccb->ccb_h.status = CAM_DEV_NOT_THERE; 528 xpt_done(ccb); 529 return; 530 } 531 532 io = ctl_alloc_io_nowait(softc->port.ctl_pool_ref); 533 if (io == NULL) { 534 printf("%s: can't allocate ctl_io\n", __func__); 535 ccb->ccb_h.status = CAM_BUSY | CAM_DEV_QFRZN; 536 xpt_freeze_devq(ccb->ccb_h.path, 1); 537 xpt_done(ccb); 538 return; 539 } 540 ctl_zero_io(io); 541 /* Save pointers on both sides */ 542 io->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptr = ccb; 543 ccb->ccb_h.io_ptr = io; 544 545 /* 546 * Only SCSI I/O comes down this path, resets, etc. come 547 * down via the XPT_RESET_BUS/LUN CCBs below. 548 */ 549 io->io_hdr.io_type = CTL_IO_SCSI; 550 io->io_hdr.nexus.initid = 1; 551 io->io_hdr.nexus.targ_port = softc->port.targ_port; 552 io->io_hdr.nexus.targ_lun = ccb->ccb_h.target_lun; 553 /* 554 * This tag scheme isn't the best, since we could in theory 555 * have a very long-lived I/O and tag collision, especially 556 * in a high I/O environment. But it should work well 557 * enough for now. Since we're using unsigned ints, 558 * they'll just wrap around. 559 */ 560 io->scsiio.tag_num = softc->cur_tag_num++; 561 csio->tag_id = io->scsiio.tag_num; 562 switch (csio->tag_action) { 563 case CAM_TAG_ACTION_NONE: 564 io->scsiio.tag_type = CTL_TAG_UNTAGGED; 565 break; 566 case MSG_SIMPLE_TASK: 567 io->scsiio.tag_type = CTL_TAG_SIMPLE; 568 break; 569 case MSG_HEAD_OF_QUEUE_TASK: 570 io->scsiio.tag_type = CTL_TAG_HEAD_OF_QUEUE; 571 break; 572 case MSG_ORDERED_TASK: 573 io->scsiio.tag_type = CTL_TAG_ORDERED; 574 break; 575 case MSG_ACA_TASK: 576 io->scsiio.tag_type = CTL_TAG_ACA; 577 break; 578 default: 579 io->scsiio.tag_type = CTL_TAG_UNTAGGED; 580 printf("%s: unhandled tag type %#x!!\n", __func__, 581 csio->tag_action); 582 break; 583 } 584 if (csio->cdb_len > sizeof(io->scsiio.cdb)) { 585 printf("%s: WARNING: CDB len %d > ctl_io space %zd\n", 586 __func__, csio->cdb_len, sizeof(io->scsiio.cdb)); 587 } 588 io->scsiio.cdb_len = min(csio->cdb_len, sizeof(io->scsiio.cdb)); 589 bcopy(csio->cdb_io.cdb_bytes, io->scsiio.cdb, 590 io->scsiio.cdb_len); 591 592 ccb->ccb_h.status |= CAM_SIM_QUEUED; 593 err = ctl_queue(io); 594 if (err != CTL_RETVAL_COMPLETE) { 595 printf("%s: func %d: error %d returned by " 596 "ctl_queue()!\n", __func__, 597 ccb->ccb_h.func_code, err); 598 ctl_free_io(io); 599 ccb->ccb_h.status = CAM_REQ_INVALID; 600 xpt_done(ccb); 601 return; 602 } 603 break; 604 } 605 case XPT_ABORT: { 606 union ctl_io *io; 607 union ccb *abort_ccb; 608 609 abort_ccb = ccb->cab.abort_ccb; 610 611 if (abort_ccb->ccb_h.func_code != XPT_SCSI_IO) { 612 ccb->ccb_h.status = CAM_REQ_INVALID; 613 xpt_done(ccb); 614 } 615 616 /* 617 * If we aren't online, there are no devices to talk to. 618 */ 619 if (softc->online == 0) { 620 ccb->ccb_h.status = CAM_DEV_NOT_THERE; 621 xpt_done(ccb); 622 return; 623 } 624 625 io = ctl_alloc_io_nowait(softc->port.ctl_pool_ref); 626 if (io == NULL) { 627 ccb->ccb_h.status = CAM_BUSY | CAM_DEV_QFRZN; 628 xpt_freeze_devq(ccb->ccb_h.path, 1); 629 xpt_done(ccb); 630 return; 631 } 632 633 ctl_zero_io(io); 634 /* Save pointers on both sides */ 635 io->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptr = ccb; 636 ccb->ccb_h.io_ptr = io; 637 638 io->io_hdr.io_type = CTL_IO_TASK; 639 io->io_hdr.nexus.initid = 1; 640 io->io_hdr.nexus.targ_port = softc->port.targ_port; 641 io->io_hdr.nexus.targ_lun = ccb->ccb_h.target_lun; 642 io->taskio.task_action = CTL_TASK_ABORT_TASK; 643 io->taskio.tag_num = abort_ccb->csio.tag_id; 644 switch (abort_ccb->csio.tag_action) { 645 case CAM_TAG_ACTION_NONE: 646 io->taskio.tag_type = CTL_TAG_UNTAGGED; 647 break; 648 case MSG_SIMPLE_TASK: 649 io->taskio.tag_type = CTL_TAG_SIMPLE; 650 break; 651 case MSG_HEAD_OF_QUEUE_TASK: 652 io->taskio.tag_type = CTL_TAG_HEAD_OF_QUEUE; 653 break; 654 case MSG_ORDERED_TASK: 655 io->taskio.tag_type = CTL_TAG_ORDERED; 656 break; 657 case MSG_ACA_TASK: 658 io->taskio.tag_type = CTL_TAG_ACA; 659 break; 660 default: 661 io->taskio.tag_type = CTL_TAG_UNTAGGED; 662 printf("%s: unhandled tag type %#x!!\n", __func__, 663 abort_ccb->csio.tag_action); 664 break; 665 } 666 err = ctl_queue(io); 667 if (err != CTL_RETVAL_COMPLETE) { 668 printf("%s func %d: error %d returned by " 669 "ctl_queue()!\n", __func__, 670 ccb->ccb_h.func_code, err); 671 ctl_free_io(io); 672 } 673 break; 674 } 675 case XPT_GET_TRAN_SETTINGS: { 676 struct ccb_trans_settings *cts; 677 struct ccb_trans_settings_scsi *scsi; 678 struct ccb_trans_settings_fc *fc; 679 680 cts = &ccb->cts; 681 scsi = &cts->proto_specific.scsi; 682 fc = &cts->xport_specific.fc; 683 684 685 cts->protocol = PROTO_SCSI; 686 cts->protocol_version = SCSI_REV_SPC2; 687 cts->transport = XPORT_FC; 688 cts->transport_version = 0; 689 690 scsi->valid = CTS_SCSI_VALID_TQ; 691 scsi->flags = CTS_SCSI_FLAGS_TAG_ENB; 692 fc->valid = CTS_FC_VALID_SPEED; 693 fc->bitrate = 800000; 694 fc->wwnn = softc->wwnn; 695 fc->wwpn = softc->wwpn; 696 fc->port = softc->port.targ_port; 697 fc->valid |= CTS_FC_VALID_WWNN | CTS_FC_VALID_WWPN | 698 CTS_FC_VALID_PORT; 699 ccb->ccb_h.status = CAM_REQ_CMP; 700 break; 701 } 702 case XPT_SET_TRAN_SETTINGS: 703 /* XXX KDM should we actually do something here? */ 704 ccb->ccb_h.status = CAM_REQ_CMP; 705 break; 706 case XPT_RESET_BUS: 707 case XPT_RESET_DEV: { 708 union ctl_io *io; 709 710 /* 711 * If we aren't online, there are no devices to talk to. 712 */ 713 if (softc->online == 0) { 714 ccb->ccb_h.status = CAM_DEV_NOT_THERE; 715 xpt_done(ccb); 716 return; 717 } 718 719 io = ctl_alloc_io_nowait(softc->port.ctl_pool_ref); 720 if (io == NULL) { 721 ccb->ccb_h.status = CAM_BUSY | CAM_DEV_QFRZN; 722 xpt_freeze_devq(ccb->ccb_h.path, 1); 723 xpt_done(ccb); 724 return; 725 } 726 727 ctl_zero_io(io); 728 /* Save pointers on both sides */ 729 if (ccb->ccb_h.func_code == XPT_RESET_DEV) 730 io->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptr = ccb; 731 ccb->ccb_h.io_ptr = io; 732 733 io->io_hdr.io_type = CTL_IO_TASK; 734 io->io_hdr.nexus.initid = 1; 735 io->io_hdr.nexus.targ_port = softc->port.targ_port; 736 io->io_hdr.nexus.targ_lun = ccb->ccb_h.target_lun; 737 if (ccb->ccb_h.func_code == XPT_RESET_BUS) 738 io->taskio.task_action = CTL_TASK_BUS_RESET; 739 else 740 io->taskio.task_action = CTL_TASK_LUN_RESET; 741 742 err = ctl_queue(io); 743 if (err != CTL_RETVAL_COMPLETE) { 744 printf("%s func %d: error %d returned by " 745 "ctl_queue()!\n", __func__, 746 ccb->ccb_h.func_code, err); 747 ctl_free_io(io); 748 } 749 break; 750 } 751 case XPT_CALC_GEOMETRY: 752 cam_calc_geometry(&ccb->ccg, 1); 753 xpt_done(ccb); 754 break; 755 case XPT_PATH_INQ: { 756 struct ccb_pathinq *cpi; 757 758 cpi = &ccb->cpi; 759 760 cpi->version_num = 0; 761 cpi->hba_inquiry = PI_TAG_ABLE; 762 cpi->target_sprt = 0; 763 cpi->hba_misc = 0; 764 cpi->hba_eng_cnt = 0; 765 cpi->max_target = 1; 766 cpi->max_lun = 1024; 767 /* Do we really have a limit? */ 768 cpi->maxio = 1024 * 1024; 769 cpi->async_flags = 0; 770 cpi->hpath_id = 0; 771 cpi->initiator_id = 0; 772 773 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 774 strncpy(cpi->hba_vid, "FreeBSD", HBA_IDLEN); 775 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 776 cpi->unit_number = 0; 777 cpi->bus_id = 0; 778 cpi->base_transfer_speed = 800000; 779 cpi->protocol = PROTO_SCSI; 780 cpi->protocol_version = SCSI_REV_SPC2; 781 /* 782 * Pretend to be Fibre Channel. 783 */ 784 cpi->transport = XPORT_FC; 785 cpi->transport_version = 0; 786 cpi->xport_specific.fc.wwnn = softc->wwnn; 787 cpi->xport_specific.fc.wwpn = softc->wwpn; 788 cpi->xport_specific.fc.port = softc->port.targ_port; 789 cpi->xport_specific.fc.bitrate = 8 * 1000 * 1000; 790 cpi->ccb_h.status = CAM_REQ_CMP; 791 break; 792 } 793 default: 794 ccb->ccb_h.status = CAM_PROVIDE_FAIL; 795 printf("%s: unsupported CCB type %#x\n", __func__, 796 ccb->ccb_h.func_code); 797 xpt_done(ccb); 798 break; 799 } 800 } 801 802 static void 803 cfcs_async(void *callback_arg, uint32_t code, struct cam_path *path, void *arg) 804 { 805 806 } 807