xref: /freebsd/sys/cam/scsi/scsi_sg.c (revision f05cddf9)
1 /*-
2  * Copyright (c) 2007 Scott Long
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions, and the following disclaimer,
10  *    without modification, immediately at the beginning of the file.
11  * 2. The name of the author may not be used to endorse or promote products
12  *    derived from this software without specific prior written permission.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
18  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  */
26 
27 /*
28  * scsi_sg peripheral driver.  This driver is meant to implement the Linux
29  * SG passthrough interface for SCSI.
30  */
31 
32 #include <sys/cdefs.h>
33 __FBSDID("$FreeBSD$");
34 
35 #include <sys/param.h>
36 #include <sys/systm.h>
37 #include <sys/kernel.h>
38 #include <sys/types.h>
39 #include <sys/bio.h>
40 #include <sys/malloc.h>
41 #include <sys/fcntl.h>
42 #include <sys/ioccom.h>
43 #include <sys/conf.h>
44 #include <sys/errno.h>
45 #include <sys/devicestat.h>
46 #include <sys/proc.h>
47 #include <sys/uio.h>
48 
49 #include <cam/cam.h>
50 #include <cam/cam_ccb.h>
51 #include <cam/cam_periph.h>
52 #include <cam/cam_queue.h>
53 #include <cam/cam_xpt_periph.h>
54 #include <cam/cam_debug.h>
55 #include <cam/cam_sim.h>
56 
57 #include <cam/scsi/scsi_all.h>
58 #include <cam/scsi/scsi_message.h>
59 #include <cam/scsi/scsi_sg.h>
60 
61 #include <compat/linux/linux_ioctl.h>
62 
63 typedef enum {
64 	SG_FLAG_LOCKED		= 0x01,
65 	SG_FLAG_INVALID		= 0x02
66 } sg_flags;
67 
68 typedef enum {
69 	SG_STATE_NORMAL
70 } sg_state;
71 
72 typedef enum {
73 	SG_RDWR_FREE,
74 	SG_RDWR_INPROG,
75 	SG_RDWR_DONE
76 } sg_rdwr_state;
77 
78 typedef enum {
79 	SG_CCB_RDWR_IO,
80 	SG_CCB_WAITING
81 } sg_ccb_types;
82 
83 #define ccb_type	ppriv_field0
84 #define ccb_rdwr	ppriv_ptr1
85 
86 struct sg_rdwr {
87 	TAILQ_ENTRY(sg_rdwr)	rdwr_link;
88 	int			tag;
89 	int			state;
90 	int			buf_len;
91 	char			*buf;
92 	union ccb		*ccb;
93 	union {
94 		struct sg_header hdr;
95 		struct sg_io_hdr io_hdr;
96 	} hdr;
97 };
98 
99 struct sg_softc {
100 	sg_state		state;
101 	sg_flags		flags;
102 	int			open_count;
103 	struct devstat		*device_stats;
104 	TAILQ_HEAD(, sg_rdwr)	rdwr_done;
105 	struct cdev		*dev;
106 	int			sg_timeout;
107 	int			sg_user_timeout;
108 	uint8_t			pd_type;
109 	union ccb		saved_ccb;
110 };
111 
112 static d_open_t		sgopen;
113 static d_close_t	sgclose;
114 static d_ioctl_t	sgioctl;
115 static d_write_t	sgwrite;
116 static d_read_t		sgread;
117 
118 static periph_init_t	sginit;
119 static periph_ctor_t	sgregister;
120 static periph_oninv_t	sgoninvalidate;
121 static periph_dtor_t	sgcleanup;
122 static periph_start_t	sgstart;
123 static void		sgasync(void *callback_arg, uint32_t code,
124 				struct cam_path *path, void *arg);
125 static void		sgdone(struct cam_periph *periph, union ccb *done_ccb);
126 static int		sgsendccb(struct cam_periph *periph, union ccb *ccb);
127 static int		sgsendrdwr(struct cam_periph *periph, union ccb *ccb);
128 static int		sgerror(union ccb *ccb, uint32_t cam_flags,
129 				uint32_t sense_flags);
130 static void		sg_scsiio_status(struct ccb_scsiio *csio,
131 					 u_short *hoststat, u_short *drvstat);
132 
133 static int		scsi_group_len(u_char cmd);
134 
135 static struct periph_driver sgdriver =
136 {
137 	sginit, "sg",
138 	TAILQ_HEAD_INITIALIZER(sgdriver.units), /* gen */ 0
139 };
140 PERIPHDRIVER_DECLARE(sg, sgdriver);
141 
142 static struct cdevsw sg_cdevsw = {
143 	.d_version =	D_VERSION,
144 	.d_flags =	D_NEEDGIANT | D_TRACKCLOSE,
145 	.d_open =	sgopen,
146 	.d_close =	sgclose,
147 	.d_ioctl =	sgioctl,
148 	.d_write =	sgwrite,
149 	.d_read =	sgread,
150 	.d_name =	"sg",
151 };
152 
153 static int sg_version = 30125;
154 
155 static void
156 sginit(void)
157 {
158 	cam_status status;
159 
160 	/*
161 	 * Install a global async callback.  This callback will receive aync
162 	 * callbacks like "new device found".
163 	 */
164 	status = xpt_register_async(AC_FOUND_DEVICE, sgasync, NULL, NULL);
165 
166 	if (status != CAM_REQ_CMP) {
167 		printf("sg: Failed to attach master async callbac "
168 			"due to status 0x%x!\n", status);
169 	}
170 }
171 
172 static void
173 sgdevgonecb(void *arg)
174 {
175 	struct cam_sim    *sim;
176 	struct cam_periph *periph;
177 	struct sg_softc *softc;
178 	int i;
179 
180 	periph = (struct cam_periph *)arg;
181 	sim = periph->sim;
182 	softc = (struct sg_softc *)periph->softc;
183 
184 	KASSERT(softc->open_count >= 0, ("Negative open count %d",
185 		softc->open_count));
186 
187 	mtx_lock(sim->mtx);
188 
189 	/*
190 	 * When we get this callback, we will get no more close calls from
191 	 * devfs.  So if we have any dangling opens, we need to release the
192 	 * reference held for that particular context.
193 	 */
194 	for (i = 0; i < softc->open_count; i++)
195 		cam_periph_release_locked(periph);
196 
197 	softc->open_count = 0;
198 
199 	/*
200 	 * Release the reference held for the device node, it is gone now.
201 	 */
202 	cam_periph_release_locked(periph);
203 
204 	/*
205 	 * We reference the SIM lock directly here, instead of using
206 	 * cam_periph_unlock().  The reason is that the final call to
207 	 * cam_periph_release_locked() above could result in the periph
208 	 * getting freed.  If that is the case, dereferencing the periph
209 	 * with a cam_periph_unlock() call would cause a page fault.
210 	 */
211 	mtx_unlock(sim->mtx);
212 }
213 
214 
215 static void
216 sgoninvalidate(struct cam_periph *periph)
217 {
218 	struct sg_softc *softc;
219 
220 	softc = (struct sg_softc *)periph->softc;
221 
222 	/*
223 	 * Deregister any async callbacks.
224 	 */
225 	xpt_register_async(0, sgasync, periph, periph->path);
226 
227 	softc->flags |= SG_FLAG_INVALID;
228 
229 	/*
230 	 * Tell devfs this device has gone away, and ask for a callback
231 	 * when it has cleaned up its state.
232 	 */
233 	destroy_dev_sched_cb(softc->dev, sgdevgonecb, periph);
234 
235 	/*
236 	 * XXX Return all queued I/O with ENXIO.
237 	 * XXX Handle any transactions queued to the card
238 	 *     with XPT_ABORT_CCB.
239 	 */
240 
241 	if (bootverbose) {
242 		xpt_print(periph->path, "lost device\n");
243 	}
244 }
245 
246 static void
247 sgcleanup(struct cam_periph *periph)
248 {
249 	struct sg_softc *softc;
250 
251 	softc = (struct sg_softc *)periph->softc;
252 	if (bootverbose)
253 		xpt_print(periph->path, "removing device entry\n");
254 
255 	devstat_remove_entry(softc->device_stats);
256 
257 	free(softc, M_DEVBUF);
258 }
259 
260 static void
261 sgasync(void *callback_arg, uint32_t code, struct cam_path *path, void *arg)
262 {
263 	struct cam_periph *periph;
264 
265 	periph = (struct cam_periph *)callback_arg;
266 
267 	switch (code) {
268 	case AC_FOUND_DEVICE:
269 	{
270 		struct ccb_getdev *cgd;
271 		cam_status status;
272 
273 		cgd = (struct ccb_getdev *)arg;
274 		if (cgd == NULL)
275 			break;
276 
277 		if (cgd->protocol != PROTO_SCSI)
278 			break;
279 
280 		/*
281 		 * Allocate a peripheral instance for this device and
282 		 * start the probe process.
283 		 */
284 		status = cam_periph_alloc(sgregister, sgoninvalidate,
285 					  sgcleanup, sgstart, "sg",
286 					  CAM_PERIPH_BIO, cgd->ccb_h.path,
287 					  sgasync, AC_FOUND_DEVICE, cgd);
288 		if ((status != CAM_REQ_CMP) && (status != CAM_REQ_INPROG)) {
289 			const struct cam_status_entry *entry;
290 
291 			entry = cam_fetch_status_entry(status);
292 			printf("sgasync: Unable to attach new device "
293 				"due to status %#x: %s\n", status, entry ?
294 				entry->status_text : "Unknown");
295 		}
296 		break;
297 	}
298 	default:
299 		cam_periph_async(periph, code, path, arg);
300 		break;
301 	}
302 }
303 
304 static cam_status
305 sgregister(struct cam_periph *periph, void *arg)
306 {
307 	struct sg_softc *softc;
308 	struct ccb_getdev *cgd;
309 	struct ccb_pathinq cpi;
310 	int no_tags;
311 
312 	cgd = (struct ccb_getdev *)arg;
313 	if (cgd == NULL) {
314 		printf("sgregister: no getdev CCB, can't register device\n");
315 		return (CAM_REQ_CMP_ERR);
316 	}
317 
318 	softc = malloc(sizeof(*softc), M_DEVBUF, M_ZERO | M_NOWAIT);
319 	if (softc == NULL) {
320 		printf("sgregister: Unable to allocate softc\n");
321 		return (CAM_REQ_CMP_ERR);
322 	}
323 
324 	softc->state = SG_STATE_NORMAL;
325 	softc->pd_type = SID_TYPE(&cgd->inq_data);
326 	softc->sg_timeout = SG_DEFAULT_TIMEOUT / SG_DEFAULT_HZ * hz;
327 	softc->sg_user_timeout = SG_DEFAULT_TIMEOUT;
328 	TAILQ_INIT(&softc->rdwr_done);
329 	periph->softc = softc;
330 
331 	bzero(&cpi, sizeof(cpi));
332 	xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
333 	cpi.ccb_h.func_code = XPT_PATH_INQ;
334 	xpt_action((union ccb *)&cpi);
335 
336 	/*
337 	 * We pass in 0 for all blocksize, since we don't know what the
338 	 * blocksize of the device is, if it even has a blocksize.
339 	 */
340 	cam_periph_unlock(periph);
341 	no_tags = (cgd->inq_data.flags & SID_CmdQue) == 0;
342 	softc->device_stats = devstat_new_entry("sg",
343 			periph->unit_number, 0,
344 			DEVSTAT_NO_BLOCKSIZE
345 			| (no_tags ? DEVSTAT_NO_ORDERED_TAGS : 0),
346 			softc->pd_type |
347 			XPORT_DEVSTAT_TYPE(cpi.transport) |
348 			DEVSTAT_TYPE_PASS,
349 			DEVSTAT_PRIORITY_PASS);
350 
351 	/*
352 	 * Acquire a reference to the periph before we create the devfs
353 	 * instance for it.  We'll release this reference once the devfs
354 	 * instance has been freed.
355 	 */
356 	if (cam_periph_acquire(periph) != CAM_REQ_CMP) {
357 		xpt_print(periph->path, "%s: lost periph during "
358 			  "registration!\n", __func__);
359 		cam_periph_lock(periph);
360 		return (CAM_REQ_CMP_ERR);
361 	}
362 
363 	/* Register the device */
364 	softc->dev = make_dev(&sg_cdevsw, periph->unit_number,
365 			      UID_ROOT, GID_OPERATOR, 0600, "%s%d",
366 			      periph->periph_name, periph->unit_number);
367 	if (periph->unit_number < 26) {
368 		(void)make_dev_alias(softc->dev, "sg%c",
369 		    periph->unit_number + 'a');
370 	} else {
371 		(void)make_dev_alias(softc->dev, "sg%c%c",
372 		    ((periph->unit_number / 26) - 1) + 'a',
373 		    (periph->unit_number % 26) + 'a');
374 	}
375 	cam_periph_lock(periph);
376 	softc->dev->si_drv1 = periph;
377 
378 	/*
379 	 * Add as async callback so that we get
380 	 * notified if this device goes away.
381 	 */
382 	xpt_register_async(AC_LOST_DEVICE, sgasync, periph, periph->path);
383 
384 	if (bootverbose)
385 		xpt_announce_periph(periph, NULL);
386 
387 	return (CAM_REQ_CMP);
388 }
389 
390 static void
391 sgstart(struct cam_periph *periph, union ccb *start_ccb)
392 {
393 	struct sg_softc *softc;
394 
395 	softc = (struct sg_softc *)periph->softc;
396 
397 	switch (softc->state) {
398 	case SG_STATE_NORMAL:
399 		start_ccb->ccb_h.ccb_type = SG_CCB_WAITING;
400 		SLIST_INSERT_HEAD(&periph->ccb_list, &start_ccb->ccb_h,
401 				  periph_links.sle);
402 		periph->immediate_priority = CAM_PRIORITY_NONE;
403 		wakeup(&periph->ccb_list);
404 		break;
405 	}
406 }
407 
408 static void
409 sgdone(struct cam_periph *periph, union ccb *done_ccb)
410 {
411 	struct sg_softc *softc;
412 	struct ccb_scsiio *csio;
413 
414 	softc = (struct sg_softc *)periph->softc;
415 	csio = &done_ccb->csio;
416 	switch (csio->ccb_h.ccb_type) {
417 	case SG_CCB_WAITING:
418 		/* Caller will release the CCB */
419 		wakeup(&done_ccb->ccb_h.cbfcnp);
420 		return;
421 	case SG_CCB_RDWR_IO:
422 	{
423 		struct sg_rdwr *rdwr;
424 		int state;
425 
426 		devstat_end_transaction(softc->device_stats,
427 					csio->dxfer_len,
428 					csio->tag_action & 0xf,
429 					((csio->ccb_h.flags & CAM_DIR_MASK) ==
430 					CAM_DIR_NONE) ? DEVSTAT_NO_DATA :
431 					(csio->ccb_h.flags & CAM_DIR_OUT) ?
432 					DEVSTAT_WRITE : DEVSTAT_READ,
433 					NULL, NULL);
434 
435 		rdwr = done_ccb->ccb_h.ccb_rdwr;
436 		state = rdwr->state;
437 		rdwr->state = SG_RDWR_DONE;
438 		wakeup(rdwr);
439 		break;
440 	}
441 	default:
442 		panic("unknown sg CCB type");
443 	}
444 }
445 
446 static int
447 sgopen(struct cdev *dev, int flags, int fmt, struct thread *td)
448 {
449 	struct cam_periph *periph;
450 	struct sg_softc *softc;
451 	int error = 0;
452 
453 	periph = (struct cam_periph *)dev->si_drv1;
454 	if (periph == NULL)
455 		return (ENXIO);
456 
457 	if (cam_periph_acquire(periph) != CAM_REQ_CMP)
458 		return (ENXIO);
459 
460 	/*
461 	 * Don't allow access when we're running at a high securelevel.
462 	 */
463 	error = securelevel_gt(td->td_ucred, 1);
464 	if (error) {
465 		cam_periph_release(periph);
466 		return (error);
467 	}
468 
469 	cam_periph_lock(periph);
470 
471 	softc = (struct sg_softc *)periph->softc;
472 	if (softc->flags & SG_FLAG_INVALID) {
473 		cam_periph_release_locked(periph);
474 		cam_periph_unlock(periph);
475 		return (ENXIO);
476 	}
477 
478 	softc->open_count++;
479 
480 	cam_periph_unlock(periph);
481 
482 	return (error);
483 }
484 
485 static int
486 sgclose(struct cdev *dev, int flag, int fmt, struct thread *td)
487 {
488 	struct cam_sim    *sim;
489 	struct cam_periph *periph;
490 	struct sg_softc   *softc;
491 
492 	periph = (struct cam_periph *)dev->si_drv1;
493 	if (periph == NULL)
494 		return (ENXIO);
495 
496 	sim = periph->sim;
497 	softc = periph->softc;
498 
499 	mtx_lock(sim->mtx);
500 
501 	softc->open_count--;
502 
503 	cam_periph_release_locked(periph);
504 
505 	/*
506 	 * We reference the SIM lock directly here, instead of using
507 	 * cam_periph_unlock().  The reason is that the call to
508 	 * cam_periph_release_locked() above could result in the periph
509 	 * getting freed.  If that is the case, dereferencing the periph
510 	 * with a cam_periph_unlock() call would cause a page fault.
511 	 *
512 	 * cam_periph_release() avoids this problem using the same method,
513 	 * but we're manually acquiring and dropping the lock here to
514 	 * protect the open count and avoid another lock acquisition and
515 	 * release.
516 	 */
517 	mtx_unlock(sim->mtx);
518 
519 	return (0);
520 }
521 
522 static int
523 sgioctl(struct cdev *dev, u_long cmd, caddr_t arg, int flag, struct thread *td)
524 {
525 	union ccb *ccb;
526 	struct ccb_scsiio *csio;
527 	struct cam_periph *periph;
528 	struct sg_softc *softc;
529 	struct sg_io_hdr req;
530 	int dir, error;
531 
532 	periph = (struct cam_periph *)dev->si_drv1;
533 	if (periph == NULL)
534 		return (ENXIO);
535 
536 	cam_periph_lock(periph);
537 
538 	softc = (struct sg_softc *)periph->softc;
539 	error = 0;
540 
541 	switch (cmd) {
542 	case LINUX_SCSI_GET_BUS_NUMBER: {
543 		int busno;
544 
545 		busno = xpt_path_path_id(periph->path);
546 		error = copyout(&busno, arg, sizeof(busno));
547 		break;
548 	}
549 	case LINUX_SCSI_GET_IDLUN: {
550 		struct scsi_idlun idlun;
551 		struct cam_sim *sim;
552 
553 		idlun.dev_id = xpt_path_target_id(periph->path);
554 		sim = xpt_path_sim(periph->path);
555 		idlun.host_unique_id = sim->unit_number;
556 		error = copyout(&idlun, arg, sizeof(idlun));
557 		break;
558 	}
559 	case SG_GET_VERSION_NUM:
560 	case LINUX_SG_GET_VERSION_NUM:
561 		error = copyout(&sg_version, arg, sizeof(sg_version));
562 		break;
563 	case SG_SET_TIMEOUT:
564 	case LINUX_SG_SET_TIMEOUT: {
565 		u_int user_timeout;
566 
567 		error = copyin(arg, &user_timeout, sizeof(u_int));
568 		if (error == 0) {
569 			softc->sg_user_timeout = user_timeout;
570 			softc->sg_timeout = user_timeout / SG_DEFAULT_HZ * hz;
571 		}
572 		break;
573 	}
574 	case SG_GET_TIMEOUT:
575 	case LINUX_SG_GET_TIMEOUT:
576 		/*
577 		 * The value is returned directly to the syscall.
578 		 */
579 		td->td_retval[0] = softc->sg_user_timeout;
580 		error = 0;
581 		break;
582 	case SG_IO:
583 	case LINUX_SG_IO:
584 		error = copyin(arg, &req, sizeof(req));
585 		if (error)
586 			break;
587 
588 		if (req.cmd_len > IOCDBLEN) {
589 			error = EINVAL;
590 			break;
591 		}
592 
593 		if (req.iovec_count != 0) {
594 			error = EOPNOTSUPP;
595 			break;
596 		}
597 
598 		ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
599 		csio = &ccb->csio;
600 
601 		error = copyin(req.cmdp, &csio->cdb_io.cdb_bytes,
602 		    req.cmd_len);
603 		if (error) {
604 			xpt_release_ccb(ccb);
605 			break;
606 		}
607 
608 		switch(req.dxfer_direction) {
609 		case SG_DXFER_TO_DEV:
610 			dir = CAM_DIR_OUT;
611 			break;
612 		case SG_DXFER_FROM_DEV:
613 			dir = CAM_DIR_IN;
614 			break;
615 		case SG_DXFER_TO_FROM_DEV:
616 			dir = CAM_DIR_IN | CAM_DIR_OUT;
617 			break;
618 		case SG_DXFER_NONE:
619 		default:
620 			dir = CAM_DIR_NONE;
621 			break;
622 		}
623 
624 		cam_fill_csio(csio,
625 			      /*retries*/1,
626 			      sgdone,
627 			      dir|CAM_DEV_QFRZDIS,
628 			      MSG_SIMPLE_Q_TAG,
629 			      req.dxferp,
630 			      req.dxfer_len,
631 			      req.mx_sb_len,
632 			      req.cmd_len,
633 			      req.timeout);
634 
635 		error = sgsendccb(periph, ccb);
636 		if (error) {
637 			req.host_status = DID_ERROR;
638 			req.driver_status = DRIVER_INVALID;
639 			xpt_release_ccb(ccb);
640 			break;
641 		}
642 
643 		req.status = csio->scsi_status;
644 		req.masked_status = (csio->scsi_status >> 1) & 0x7f;
645 		sg_scsiio_status(csio, &req.host_status, &req.driver_status);
646 		req.resid = csio->resid;
647 		req.duration = csio->ccb_h.timeout;
648 		req.info = 0;
649 
650 		error = copyout(&req, arg, sizeof(req));
651 		if ((error == 0) && (csio->ccb_h.status & CAM_AUTOSNS_VALID)
652 		    && (req.sbp != NULL)) {
653 			req.sb_len_wr = req.mx_sb_len - csio->sense_resid;
654 			error = copyout(&csio->sense_data, req.sbp,
655 					req.sb_len_wr);
656 		}
657 
658 		xpt_release_ccb(ccb);
659 		break;
660 
661 	case SG_GET_RESERVED_SIZE:
662 	case LINUX_SG_GET_RESERVED_SIZE: {
663 		int size = 32768;
664 
665 		error = copyout(&size, arg, sizeof(size));
666 		break;
667 	}
668 
669 	case SG_GET_SCSI_ID:
670 	case LINUX_SG_GET_SCSI_ID:
671 	{
672 		struct sg_scsi_id id;
673 
674 		id.host_no = cam_sim_path(xpt_path_sim(periph->path));
675 		id.channel = xpt_path_path_id(periph->path);
676 		id.scsi_id = xpt_path_target_id(periph->path);
677 		id.lun = xpt_path_lun_id(periph->path);
678 		id.scsi_type = softc->pd_type;
679 		id.h_cmd_per_lun = 1;
680 		id.d_queue_depth = 1;
681 		id.unused[0] = 0;
682 		id.unused[1] = 0;
683 
684 		error = copyout(&id, arg, sizeof(id));
685 		break;
686 	}
687 
688 	case SG_EMULATED_HOST:
689 	case SG_SET_TRANSFORM:
690 	case SG_GET_TRANSFORM:
691 	case SG_GET_NUM_WAITING:
692 	case SG_SCSI_RESET:
693 	case SG_GET_REQUEST_TABLE:
694 	case SG_SET_KEEP_ORPHAN:
695 	case SG_GET_KEEP_ORPHAN:
696 	case SG_GET_ACCESS_COUNT:
697 	case SG_SET_FORCE_LOW_DMA:
698 	case SG_GET_LOW_DMA:
699 	case SG_GET_SG_TABLESIZE:
700 	case SG_SET_FORCE_PACK_ID:
701 	case SG_GET_PACK_ID:
702 	case SG_SET_RESERVED_SIZE:
703 	case SG_GET_COMMAND_Q:
704 	case SG_SET_COMMAND_Q:
705 	case SG_SET_DEBUG:
706 	case SG_NEXT_CMD_LEN:
707 	case LINUX_SG_EMULATED_HOST:
708 	case LINUX_SG_SET_TRANSFORM:
709 	case LINUX_SG_GET_TRANSFORM:
710 	case LINUX_SG_GET_NUM_WAITING:
711 	case LINUX_SG_SCSI_RESET:
712 	case LINUX_SG_GET_REQUEST_TABLE:
713 	case LINUX_SG_SET_KEEP_ORPHAN:
714 	case LINUX_SG_GET_KEEP_ORPHAN:
715 	case LINUX_SG_GET_ACCESS_COUNT:
716 	case LINUX_SG_SET_FORCE_LOW_DMA:
717 	case LINUX_SG_GET_LOW_DMA:
718 	case LINUX_SG_GET_SG_TABLESIZE:
719 	case LINUX_SG_SET_FORCE_PACK_ID:
720 	case LINUX_SG_GET_PACK_ID:
721 	case LINUX_SG_SET_RESERVED_SIZE:
722 	case LINUX_SG_GET_COMMAND_Q:
723 	case LINUX_SG_SET_COMMAND_Q:
724 	case LINUX_SG_SET_DEBUG:
725 	case LINUX_SG_NEXT_CMD_LEN:
726 	default:
727 #ifdef CAMDEBUG
728 		printf("sgioctl: rejecting cmd 0x%lx\n", cmd);
729 #endif
730 		error = ENODEV;
731 		break;
732 	}
733 
734 	cam_periph_unlock(periph);
735 	return (error);
736 }
737 
738 static int
739 sgwrite(struct cdev *dev, struct uio *uio, int ioflag)
740 {
741 	union ccb *ccb;
742 	struct cam_periph *periph;
743 	struct ccb_scsiio *csio;
744 	struct sg_softc *sc;
745 	struct sg_header *hdr;
746 	struct sg_rdwr *rdwr;
747 	u_char cdb_cmd;
748 	char *buf;
749 	int error = 0, cdb_len, buf_len, dir;
750 
751 	periph = dev->si_drv1;
752 	rdwr = malloc(sizeof(*rdwr), M_DEVBUF, M_WAITOK | M_ZERO);
753 	hdr = &rdwr->hdr.hdr;
754 
755 	/* Copy in the header block and sanity check it */
756 	if (uio->uio_resid < sizeof(*hdr)) {
757 		error = EINVAL;
758 		goto out_hdr;
759 	}
760 	error = uiomove(hdr, sizeof(*hdr), uio);
761 	if (error)
762 		goto out_hdr;
763 
764 	ccb = xpt_alloc_ccb();
765 	if (ccb == NULL) {
766 		error = ENOMEM;
767 		goto out_hdr;
768 	}
769 	csio = &ccb->csio;
770 
771 	/*
772 	 * Copy in the CDB block.  The designers of the interface didn't
773 	 * bother to provide a size for this in the header, so we have to
774 	 * figure it out ourselves.
775 	 */
776 	if (uio->uio_resid < 1)
777 		goto out_ccb;
778 	error = uiomove(&cdb_cmd, 1, uio);
779 	if (error)
780 		goto out_ccb;
781 	if (hdr->twelve_byte)
782 		cdb_len = 12;
783 	else
784 		cdb_len = scsi_group_len(cdb_cmd);
785 	/*
786 	 * We've already read the first byte of the CDB and advanced the uio
787 	 * pointer.  Just read the rest.
788 	 */
789 	csio->cdb_io.cdb_bytes[0] = cdb_cmd;
790 	error = uiomove(&csio->cdb_io.cdb_bytes[1], cdb_len - 1, uio);
791 	if (error)
792 		goto out_ccb;
793 
794 	/*
795 	 * Now set up the data block.  Again, the designers didn't bother
796 	 * to make this reliable.
797 	 */
798 	buf_len = uio->uio_resid;
799 	if (buf_len != 0) {
800 		buf = malloc(buf_len, M_DEVBUF, M_WAITOK | M_ZERO);
801 		error = uiomove(buf, buf_len, uio);
802 		if (error)
803 			goto out_buf;
804 		dir = CAM_DIR_OUT;
805 	} else if (hdr->reply_len != 0) {
806 		buf = malloc(hdr->reply_len, M_DEVBUF, M_WAITOK | M_ZERO);
807 		buf_len = hdr->reply_len;
808 		dir = CAM_DIR_IN;
809 	} else {
810 		buf = NULL;
811 		buf_len = 0;
812 		dir = CAM_DIR_NONE;
813 	}
814 
815 	cam_periph_lock(periph);
816 	sc = periph->softc;
817 	xpt_setup_ccb(&ccb->ccb_h, periph->path, CAM_PRIORITY_NORMAL);
818 	cam_fill_csio(csio,
819 		      /*retries*/1,
820 		      sgdone,
821 		      dir|CAM_DEV_QFRZDIS,
822 		      MSG_SIMPLE_Q_TAG,
823 		      buf,
824 		      buf_len,
825 		      SG_MAX_SENSE,
826 		      cdb_len,
827 		      sc->sg_timeout);
828 
829 	/*
830 	 * Send off the command and hope that it works. This path does not
831 	 * go through sgstart because the I/O is supposed to be asynchronous.
832 	 */
833 	rdwr->buf = buf;
834 	rdwr->buf_len = buf_len;
835 	rdwr->tag = hdr->pack_id;
836 	rdwr->ccb = ccb;
837 	rdwr->state = SG_RDWR_INPROG;
838 	ccb->ccb_h.ccb_rdwr = rdwr;
839 	ccb->ccb_h.ccb_type = SG_CCB_RDWR_IO;
840 	TAILQ_INSERT_TAIL(&sc->rdwr_done, rdwr, rdwr_link);
841 	error = sgsendrdwr(periph, ccb);
842 	cam_periph_unlock(periph);
843 	return (error);
844 
845 out_buf:
846 	free(buf, M_DEVBUF);
847 out_ccb:
848 	xpt_free_ccb(ccb);
849 out_hdr:
850 	free(rdwr, M_DEVBUF);
851 	return (error);
852 }
853 
854 static int
855 sgread(struct cdev *dev, struct uio *uio, int ioflag)
856 {
857 	struct ccb_scsiio *csio;
858 	struct cam_periph *periph;
859 	struct sg_softc *sc;
860 	struct sg_header *hdr;
861 	struct sg_rdwr *rdwr;
862 	u_short hstat, dstat;
863 	int error, pack_len, reply_len, pack_id;
864 
865 	periph = dev->si_drv1;
866 
867 	/* XXX The pack len field needs to be updated and written out instead
868 	 * of discarded.  Not sure how to do that.
869 	 */
870 	uio->uio_rw = UIO_WRITE;
871 	if ((error = uiomove(&pack_len, 4, uio)) != 0)
872 		return (error);
873 	if ((error = uiomove(&reply_len, 4, uio)) != 0)
874 		return (error);
875 	if ((error = uiomove(&pack_id, 4, uio)) != 0)
876 		return (error);
877 	uio->uio_rw = UIO_READ;
878 
879 	cam_periph_lock(periph);
880 	sc = periph->softc;
881 search:
882 	TAILQ_FOREACH(rdwr, &sc->rdwr_done, rdwr_link) {
883 		if (rdwr->tag == pack_id)
884 			break;
885 	}
886 	if ((rdwr == NULL) || (rdwr->state != SG_RDWR_DONE)) {
887 		if (msleep(rdwr, periph->sim->mtx, PCATCH, "sgread", 0) == ERESTART)
888 			return (EAGAIN);
889 		goto search;
890 	}
891 	TAILQ_REMOVE(&sc->rdwr_done, rdwr, rdwr_link);
892 	cam_periph_unlock(periph);
893 
894 	hdr = &rdwr->hdr.hdr;
895 	csio = &rdwr->ccb->csio;
896 	sg_scsiio_status(csio, &hstat, &dstat);
897 	hdr->host_status = hstat;
898 	hdr->driver_status = dstat;
899 	hdr->target_status = csio->scsi_status >> 1;
900 
901 	switch (hstat) {
902 	case DID_OK:
903 	case DID_PASSTHROUGH:
904 	case DID_SOFT_ERROR:
905 		hdr->result = 0;
906 		break;
907 	case DID_NO_CONNECT:
908 	case DID_BUS_BUSY:
909 	case DID_TIME_OUT:
910 		hdr->result = EBUSY;
911 		break;
912 	case DID_BAD_TARGET:
913 	case DID_ABORT:
914 	case DID_PARITY:
915 	case DID_RESET:
916 	case DID_BAD_INTR:
917 	case DID_ERROR:
918 	default:
919 		hdr->result = EIO;
920 		break;
921 	}
922 
923 	if (dstat == DRIVER_SENSE) {
924 		bcopy(&csio->sense_data, hdr->sense_buffer,
925 		      min(csio->sense_len, SG_MAX_SENSE));
926 #ifdef CAMDEBUG
927 		scsi_sense_print(csio);
928 #endif
929 	}
930 
931 	error = uiomove(&hdr->result, sizeof(*hdr) -
932 			offsetof(struct sg_header, result), uio);
933 	if ((error == 0) && (hdr->result == 0))
934 		error = uiomove(rdwr->buf, rdwr->buf_len, uio);
935 
936 	cam_periph_lock(periph);
937 	xpt_free_ccb(rdwr->ccb);
938 	cam_periph_unlock(periph);
939 	free(rdwr->buf, M_DEVBUF);
940 	free(rdwr, M_DEVBUF);
941 	return (error);
942 }
943 
944 static int
945 sgsendccb(struct cam_periph *periph, union ccb *ccb)
946 {
947 	struct sg_softc *softc;
948 	struct cam_periph_map_info mapinfo;
949 	int error;
950 
951 	softc = periph->softc;
952 	bzero(&mapinfo, sizeof(mapinfo));
953 
954 	/*
955 	 * cam_periph_mapmem calls into proc and vm functions that can
956 	 * sleep as well as trigger I/O, so we can't hold the lock.
957 	 * Dropping it here is reasonably safe.
958 	 * The only CCB opcode that is possible here is XPT_SCSI_IO, no
959 	 * need for additional checks.
960 	 */
961 	cam_periph_unlock(periph);
962 	error = cam_periph_mapmem(ccb, &mapinfo);
963 	cam_periph_lock(periph);
964 	if (error)
965 		return (error);
966 
967 	error = cam_periph_runccb(ccb,
968 				  sgerror,
969 				  CAM_RETRY_SELTO,
970 				  SF_RETRY_UA,
971 				  softc->device_stats);
972 
973 	cam_periph_unmapmem(ccb, &mapinfo);
974 
975 	return (error);
976 }
977 
978 static int
979 sgsendrdwr(struct cam_periph *periph, union ccb *ccb)
980 {
981 	struct sg_softc *softc;
982 
983 	softc = periph->softc;
984 	devstat_start_transaction(softc->device_stats, NULL);
985 	xpt_action(ccb);
986 	return (0);
987 }
988 
989 static int
990 sgerror(union ccb *ccb, uint32_t cam_flags, uint32_t sense_flags)
991 {
992 	struct cam_periph *periph;
993 	struct sg_softc *softc;
994 
995 	periph = xpt_path_periph(ccb->ccb_h.path);
996 	softc = (struct sg_softc *)periph->softc;
997 
998 	return (cam_periph_error(ccb, cam_flags, sense_flags,
999 				 &softc->saved_ccb));
1000 }
1001 
1002 static void
1003 sg_scsiio_status(struct ccb_scsiio *csio, u_short *hoststat, u_short *drvstat)
1004 {
1005 	int status;
1006 
1007 	status = csio->ccb_h.status;
1008 
1009 	switch (status & CAM_STATUS_MASK) {
1010 	case CAM_REQ_CMP:
1011 		*hoststat = DID_OK;
1012 		*drvstat = 0;
1013 		break;
1014 	case CAM_REQ_CMP_ERR:
1015 		*hoststat = DID_ERROR;
1016 		*drvstat = 0;
1017 		break;
1018 	case CAM_REQ_ABORTED:
1019 		*hoststat = DID_ABORT;
1020 		*drvstat = 0;
1021 		break;
1022 	case CAM_REQ_INVALID:
1023 		*hoststat = DID_ERROR;
1024 		*drvstat = DRIVER_INVALID;
1025 		break;
1026 	case CAM_DEV_NOT_THERE:
1027 		*hoststat = DID_BAD_TARGET;
1028 		*drvstat = 0;
1029 		break;
1030 	case CAM_SEL_TIMEOUT:
1031 		*hoststat = DID_NO_CONNECT;
1032 		*drvstat = 0;
1033 		break;
1034 	case CAM_CMD_TIMEOUT:
1035 		*hoststat = DID_TIME_OUT;
1036 		*drvstat = 0;
1037 		break;
1038 	case CAM_SCSI_STATUS_ERROR:
1039 		*hoststat = DID_ERROR;
1040 		*drvstat = 0;
1041 		break;
1042 	case CAM_SCSI_BUS_RESET:
1043 		*hoststat = DID_RESET;
1044 		*drvstat = 0;
1045 		break;
1046 	case CAM_UNCOR_PARITY:
1047 		*hoststat = DID_PARITY;
1048 		*drvstat = 0;
1049 		break;
1050 	case CAM_SCSI_BUSY:
1051 		*hoststat = DID_BUS_BUSY;
1052 		*drvstat = 0;
1053 		break;
1054 	default:
1055 		*hoststat = DID_ERROR;
1056 		*drvstat = DRIVER_ERROR;
1057 	}
1058 
1059 	if (status & CAM_AUTOSNS_VALID)
1060 		*drvstat = DRIVER_SENSE;
1061 }
1062 
1063 static int
1064 scsi_group_len(u_char cmd)
1065 {
1066 	int len[] = {6, 10, 10, 12, 12, 12, 10, 10};
1067 	int group;
1068 
1069 	group = (cmd >> 5) & 0x7;
1070 	return (len[group]);
1071 }
1072 
1073