1# $FreeBSD$ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in NOTES, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT (generated from NOTES) should 8# compile as much code as possible. Try to structure option-using 9# code so that a single option only switch code on, or only switch 10# code off, to make it possible to have a full compile-test. If 11# necessary, you can check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "conf/options.<machine>". Options that affect a single source-file 16# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 17# that affect multiple files should either go in "opt_global.h" if 18# this is a kernel-wide option (used just about everywhere), or in 19# "opt_<option-name-in-lower-case>.h" if it affects only some files. 20# Note that the effect of listing only an option without a 21# header-file-name in conf/options (and cousins) is that the last 22# convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33AAC_DEBUG opt_aac.h 34AACRAID_DEBUG opt_aacraid.h 35AHC_ALLOW_MEMIO opt_aic7xxx.h 36AHC_TMODE_ENABLE opt_aic7xxx.h 37AHC_DUMP_EEPROM opt_aic7xxx.h 38AHC_DEBUG opt_aic7xxx.h 39AHC_DEBUG_OPTS opt_aic7xxx.h 40AHC_REG_PRETTY_PRINT opt_aic7xxx.h 41AHD_DEBUG opt_aic79xx.h 42AHD_DEBUG_OPTS opt_aic79xx.h 43AHD_TMODE_ENABLE opt_aic79xx.h 44AHD_REG_PRETTY_PRINT opt_aic79xx.h 45 46TWA_DEBUG opt_twa.h 47 48# Debugging options. 49ALT_BREAK_TO_DEBUGGER opt_kdb.h 50BREAK_TO_DEBUGGER opt_kdb.h 51BUF_TRACKING opt_global.h 52DDB 53DDB_BUFR_SIZE opt_ddb.h 54DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 55DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 56DDB_CTF opt_ddb.h 57DDB_NUMSYM opt_ddb.h 58FULL_BUF_TRACKING opt_global.h 59GDB 60KDB opt_global.h 61KDB_TRACE opt_kdb.h 62KDB_UNATTENDED opt_kdb.h 63KLD_DEBUG opt_kld.h 64SYSCTL_DEBUG opt_sysctl.h 65EARLY_PRINTF opt_global.h 66TEXTDUMP_PREFERRED opt_ddb.h 67TEXTDUMP_VERBOSE opt_ddb.h 68NUM_CORE_FILES opt_global.h 69TSLOG opt_global.h 70TSLOGSIZE opt_global.h 71 72# Miscellaneous options. 73ALQ 74ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 75ATSE_CFI_HACK opt_cfi.h 76AUDIT opt_global.h 77BOOTHOWTO opt_global.h 78BOOTVERBOSE opt_global.h 79CALLOUT_PROFILING 80CAPABILITIES opt_capsicum.h 81CAPABILITY_MODE opt_capsicum.h 82COMPAT_43 opt_global.h 83COMPAT_43TTY opt_global.h 84COMPAT_FREEBSD4 opt_global.h 85COMPAT_FREEBSD5 opt_global.h 86COMPAT_FREEBSD6 opt_global.h 87COMPAT_FREEBSD7 opt_global.h 88COMPAT_FREEBSD9 opt_global.h 89COMPAT_FREEBSD10 opt_global.h 90COMPAT_FREEBSD11 opt_global.h 91COMPAT_CLOUDABI32 opt_dontuse.h 92COMPAT_CLOUDABI64 opt_dontuse.h 93COMPAT_LINUXKPI opt_dontuse.h 94_COMPAT_LINUX32 opt_compat.h # XXX: make sure opt_compat.h exists 95COMPILING_LINT opt_global.h 96CY_PCI_FASTINTR 97DEADLKRES opt_watchdog.h 98EXPERIMENTAL opt_global.h 99EXT_RESOURCES opt_global.h 100DIRECTIO 101FILEMON opt_dontuse.h 102FFCLOCK 103FULL_PREEMPTION opt_sched.h 104GZIO opt_gzio.h 105IMAGACT_BINMISC opt_dontuse.h 106IPI_PREEMPTION opt_sched.h 107GEOM_BDE opt_geom.h 108GEOM_BSD opt_geom.h 109GEOM_CACHE opt_geom.h 110GEOM_CONCAT opt_geom.h 111GEOM_ELI opt_geom.h 112GEOM_FOX opt_geom.h 113GEOM_GATE opt_geom.h 114GEOM_JOURNAL opt_geom.h 115GEOM_LABEL opt_geom.h 116GEOM_LABEL_GPT opt_geom.h 117GEOM_LINUX_LVM opt_geom.h 118GEOM_MAP opt_geom.h 119GEOM_MBR opt_geom.h 120GEOM_MIRROR opt_geom.h 121GEOM_MOUNTVER opt_geom.h 122GEOM_MULTIPATH opt_geom.h 123GEOM_NOP opt_geom.h 124GEOM_PART_APM opt_geom.h 125GEOM_PART_BSD opt_geom.h 126GEOM_PART_BSD64 opt_geom.h 127GEOM_PART_EBR opt_geom.h 128GEOM_PART_EBR_COMPAT opt_geom.h 129GEOM_PART_GPT opt_geom.h 130GEOM_PART_LDM opt_geom.h 131GEOM_PART_MBR opt_geom.h 132GEOM_PART_VTOC8 opt_geom.h 133GEOM_RAID opt_geom.h 134GEOM_RAID3 opt_geom.h 135GEOM_SHSEC opt_geom.h 136GEOM_STRIPE opt_geom.h 137GEOM_SUNLABEL opt_geom.h 138GEOM_UZIP opt_geom.h 139GEOM_UZIP_DEBUG opt_geom.h 140GEOM_VINUM opt_geom.h 141GEOM_VIRSTOR opt_geom.h 142GEOM_VOL opt_geom.h 143GEOM_ZERO opt_geom.h 144IFLIB opt_iflib.h 145KDTRACE_HOOKS opt_global.h 146KDTRACE_FRAME opt_kdtrace.h 147KN_HASHSIZE opt_kqueue.h 148KSTACK_MAX_PAGES 149KSTACK_PAGES 150KSTACK_USAGE_PROF 151KTRACE 152KTRACE_REQUEST_POOL opt_ktrace.h 153LIBICONV 154MAC opt_global.h 155MAC_BIBA opt_dontuse.h 156MAC_BSDEXTENDED opt_dontuse.h 157MAC_IFOFF opt_dontuse.h 158MAC_LOMAC opt_dontuse.h 159MAC_MLS opt_dontuse.h 160MAC_NONE opt_dontuse.h 161MAC_NTPD opt_dontuse.h 162MAC_PARTITION opt_dontuse.h 163MAC_PORTACL opt_dontuse.h 164MAC_SEEOTHERUIDS opt_dontuse.h 165MAC_STATIC opt_mac.h 166MAC_STUB opt_dontuse.h 167MAC_TEST opt_dontuse.h 168MAC_VERIEXEC opt_dontuse.h 169MAC_VERIEXEC_SHA1 opt_dontuse.h 170MAC_VERIEXEC_SHA256 opt_dontuse.h 171MAC_VERIEXEC_SHA384 opt_dontuse.h 172MAC_VERIEXEC_SHA512 opt_dontuse.h 173MD_ROOT opt_md.h 174MD_ROOT_FSTYPE opt_md.h 175MD_ROOT_READONLY opt_md.h 176MD_ROOT_SIZE opt_md.h 177MD_ROOT_MEM opt_md.h 178MFI_DEBUG opt_mfi.h 179MFI_DECODE_LOG opt_mfi.h 180MPROF_BUFFERS opt_mprof.h 181MPROF_HASH_SIZE opt_mprof.h 182NEW_PCIB opt_global.h 183NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 184NO_ADAPTIVE_RWLOCKS 185NO_ADAPTIVE_SX 186NO_EVENTTIMERS opt_timer.h 187NO_OBSOLETE_CODE opt_global.h 188NO_SYSCTL_DESCR opt_global.h 189NSWBUF_MIN opt_param.h 190MBUF_PACKET_ZONE_DISABLE opt_global.h 191PANIC_REBOOT_WAIT_TIME opt_panic.h 192PCI_HP opt_pci.h 193PCI_IOV opt_global.h 194PPC_DEBUG opt_ppc.h 195PPC_PROBE_CHIPSET opt_ppc.h 196PPS_SYNC opt_ntp.h 197PREEMPTION opt_sched.h 198QUOTA 199SCHED_4BSD opt_sched.h 200SCHED_STATS opt_sched.h 201SCHED_ULE opt_sched.h 202SLEEPQUEUE_PROFILING 203SLHCI_DEBUG opt_slhci.h 204STACK opt_stack.h 205SUIDDIR 206MSGMNB opt_sysvipc.h 207MSGMNI opt_sysvipc.h 208MSGSEG opt_sysvipc.h 209MSGSSZ opt_sysvipc.h 210MSGTQL opt_sysvipc.h 211SEMMNI opt_sysvipc.h 212SEMMNS opt_sysvipc.h 213SEMMNU opt_sysvipc.h 214SEMMSL opt_sysvipc.h 215SEMOPM opt_sysvipc.h 216SEMUME opt_sysvipc.h 217SHMALL opt_sysvipc.h 218SHMMAX opt_sysvipc.h 219SHMMAXPGS opt_sysvipc.h 220SHMMIN opt_sysvipc.h 221SHMMNI opt_sysvipc.h 222SHMSEG opt_sysvipc.h 223SYSVMSG opt_sysvipc.h 224SYSVSEM opt_sysvipc.h 225SYSVSHM opt_sysvipc.h 226SW_WATCHDOG opt_watchdog.h 227TCPHPTS opt_inet.h 228TURNSTILE_PROFILING 229UMTX_PROFILING 230UMTX_CHAINS opt_global.h 231VERBOSE_SYSINIT 232ZSTDIO opt_zstdio.h 233 234# Sanitizers 235COVERAGE opt_global.h 236KCOV 237KUBSAN opt_global.h 238 239# POSIX kernel options 240P1003_1B_MQUEUE opt_posix.h 241P1003_1B_SEMAPHORES opt_posix.h 242_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 243 244# Do we want the config file compiled into the kernel? 245INCLUDE_CONFIG_FILE opt_config.h 246 247# Options for static filesystems. These should only be used at config 248# time, since the corresponding lkms cannot work if there are any static 249# dependencies. Unusability is enforced by hiding the defines for the 250# options in a never-included header. 251AUTOFS opt_dontuse.h 252CD9660 opt_dontuse.h 253EXT2FS opt_dontuse.h 254FDESCFS opt_dontuse.h 255FFS opt_dontuse.h 256FUSE opt_dontuse.h 257MSDOSFS opt_dontuse.h 258NANDFS opt_dontuse.h 259NULLFS opt_dontuse.h 260PROCFS opt_dontuse.h 261PSEUDOFS opt_dontuse.h 262SMBFS opt_dontuse.h 263TMPFS opt_dontuse.h 264UDF opt_dontuse.h 265UNIONFS opt_dontuse.h 266ZFS opt_dontuse.h 267 268# Pseudofs debugging 269PSEUDOFS_TRACE opt_pseudofs.h 270 271# In-kernel GSS-API 272KGSSAPI opt_kgssapi.h 273KGSSAPI_DEBUG opt_kgssapi.h 274 275# These static filesystems have one slightly bogus static dependency in 276# sys/i386/i386/autoconf.c. If any of these filesystems are 277# statically compiled into the kernel, code for mounting them as root 278# filesystems will be enabled - but look below. 279# NFSCL - client 280# NFSD - server 281NFSCL opt_nfs.h 282NFSD opt_nfs.h 283 284# filesystems and libiconv bridge 285CD9660_ICONV opt_dontuse.h 286MSDOSFS_ICONV opt_dontuse.h 287UDF_ICONV opt_dontuse.h 288 289# If you are following the conditions in the copyright, 290# you can enable soft-updates which will speed up a lot of thigs 291# and make the system safer from crashes at the same time. 292# otherwise a STUB module will be compiled in. 293SOFTUPDATES opt_ffs.h 294 295# On small, embedded systems, it can be useful to turn off support for 296# snapshots. It saves about 30-40k for a feature that would be lightly 297# used, if it is used at all. 298NO_FFS_SNAPSHOT opt_ffs.h 299 300# Enabling this option turns on support for Access Control Lists in UFS, 301# which can be used to support high security configurations. Depends on 302# UFS_EXTATTR. 303UFS_ACL opt_ufs.h 304 305# Enabling this option turns on support for extended attributes in UFS-based 306# filesystems, which can be used to support high security configurations 307# as well as new filesystem features. 308UFS_EXTATTR opt_ufs.h 309UFS_EXTATTR_AUTOSTART opt_ufs.h 310 311# Enable fast hash lookups for large directories on UFS-based filesystems. 312UFS_DIRHASH opt_ufs.h 313 314# Enable gjournal-based UFS journal. 315UFS_GJOURNAL opt_ufs.h 316 317# The below sentence is not in English, and neither is this one. 318# We plan to remove the static dependences above, with a 319# <filesystem>_ROOT option to control if it usable as root. This list 320# allows these options to be present in config files already (though 321# they won't make any difference yet). 322NFS_ROOT opt_nfsroot.h 323 324# SMB/CIFS requester 325NETSMB opt_netsmb.h 326 327# Enable netdump(4) client support. 328NETDUMP opt_global.h 329 330# Options used only in subr_param.c. 331HZ opt_param.h 332MAXFILES opt_param.h 333NBUF opt_param.h 334NSFBUFS opt_param.h 335VM_BCACHE_SIZE_MAX opt_param.h 336VM_SWZONE_SIZE_MAX opt_param.h 337MAXUSERS 338DFLDSIZ opt_param.h 339MAXDSIZ opt_param.h 340MAXSSIZ opt_param.h 341 342# Generic SCSI options. 343CAM_MAX_HIGHPOWER opt_cam.h 344CAMDEBUG opt_cam.h 345CAM_DEBUG_COMPILE opt_cam.h 346CAM_DEBUG_DELAY opt_cam.h 347CAM_DEBUG_BUS opt_cam.h 348CAM_DEBUG_TARGET opt_cam.h 349CAM_DEBUG_LUN opt_cam.h 350CAM_DEBUG_FLAGS opt_cam.h 351CAM_BOOT_DELAY opt_cam.h 352CAM_IOSCHED_DYNAMIC opt_cam.h 353CAM_TEST_FAILURE opt_cam.h 354SCSI_DELAY opt_scsi.h 355SCSI_NO_SENSE_STRINGS opt_scsi.h 356SCSI_NO_OP_STRINGS opt_scsi.h 357 358# Options used only in cam/ata/ata_da.c 359ATA_STATIC_ID opt_ada.h 360 361# Options used only in cam/scsi/scsi_cd.c 362CHANGER_MIN_BUSY_SECONDS opt_cd.h 363CHANGER_MAX_BUSY_SECONDS opt_cd.h 364 365# Options used only in cam/scsi/scsi_da.c 366DA_TRACK_REFS opt_da.h 367 368# Options used only in cam/scsi/scsi_sa.c. 369SA_IO_TIMEOUT opt_sa.h 370SA_SPACE_TIMEOUT opt_sa.h 371SA_REWIND_TIMEOUT opt_sa.h 372SA_ERASE_TIMEOUT opt_sa.h 373SA_1FM_AT_EOD opt_sa.h 374 375# Options used only in cam/scsi/scsi_pt.c 376SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 377 378# Options used only in cam/scsi/scsi_ses.c 379SES_ENABLE_PASSTHROUGH opt_ses.h 380 381# Options used in dev/sym/ (Symbios SCSI driver). 382SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 383 # disabled:0 (default), enabled:1 384SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 385 # disabled:0, enabled:1 (default) 386SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 387 # default:8, range:[1..64] 388 389# Options used only in dev/isp/* 390ISP_TARGET_MODE opt_isp.h 391ISP_FW_CRASH_DUMP opt_isp.h 392ISP_DEFAULT_ROLES opt_isp.h 393ISP_INTERNAL_TARGET opt_isp.h 394ISP_FCTAPE_OFF opt_isp.h 395 396# Options used only in dev/iscsi 397ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 398 399# Net stuff. 400ACCEPT_FILTER_DATA 401ACCEPT_FILTER_DNS 402ACCEPT_FILTER_HTTP 403ALTQ opt_global.h 404ALTQ_CBQ opt_altq.h 405ALTQ_CDNR opt_altq.h 406ALTQ_CODEL opt_altq.h 407ALTQ_DEBUG opt_altq.h 408ALTQ_HFSC opt_altq.h 409ALTQ_FAIRQ opt_altq.h 410ALTQ_NOPCC opt_altq.h 411ALTQ_PRIQ opt_altq.h 412ALTQ_RED opt_altq.h 413ALTQ_RIO opt_altq.h 414BOOTP opt_bootp.h 415BOOTP_BLOCKSIZE opt_bootp.h 416BOOTP_COMPAT opt_bootp.h 417BOOTP_NFSROOT opt_bootp.h 418BOOTP_NFSV3 opt_bootp.h 419BOOTP_WIRED_TO opt_bootp.h 420DEVICE_POLLING 421DUMMYNET opt_ipdn.h 422RATELIMIT opt_ratelimit.h 423RATELIMIT_DEBUG opt_ratelimit.h 424INET opt_inet.h 425INET6 opt_inet6.h 426IPDIVERT 427IPFILTER opt_ipfilter.h 428IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 429IPFILTER_LOG opt_ipfilter.h 430IPFILTER_LOOKUP opt_ipfilter.h 431IPFIREWALL opt_ipfw.h 432IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 433IPFIREWALL_NAT opt_ipfw.h 434IPFIREWALL_NAT64 opt_ipfw.h 435IPFIREWALL_NPTV6 opt_ipfw.h 436IPFIREWALL_VERBOSE opt_ipfw.h 437IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 438IPFIREWALL_PMOD opt_ipfw.h 439IPSEC opt_ipsec.h 440IPSEC_DEBUG opt_ipsec.h 441IPSEC_SUPPORT opt_ipsec.h 442IPSTEALTH 443KRPC 444LIBALIAS 445LIBMCHAIN 446MBUF_PROFILING 447MBUF_STRESS_TEST 448MROUTING opt_mrouting.h 449NFSLOCKD 450PCBGROUP opt_pcbgroup.h 451PF_DEFAULT_TO_DROP opt_pf.h 452RADIX_MPATH opt_mpath.h 453ROUTETABLES opt_route.h 454RSS opt_rss.h 455SLIP_IFF_OPTS opt_slip.h 456TCPDEBUG 457TCPPCAP opt_global.h 458SIFTR 459TCP_BLACKBOX opt_global.h 460TCP_HHOOK opt_inet.h 461TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 462TCP_RFC7413 opt_inet.h 463TCP_RFC7413_MAX_KEYS opt_inet.h 464TCP_RFC7413_MAX_PSKS opt_inet.h 465TCP_SIGNATURE opt_ipsec.h 466VLAN_ARRAY opt_vlan.h 467XBONEHACK 468 469# 470# SCTP 471# 472SCTP opt_sctp.h 473SCTP_DEBUG opt_sctp.h # Enable debug printfs 474SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 475SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 476SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 477SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 478SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 479SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 480SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 481SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 482SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl 483SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats 484# 485# 486# 487 488# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 489# Each netgraph node type can be either be compiled into the kernel 490# or loaded dynamically. To get the former, include the corresponding 491# option below. Each type has its own man page, e.g. ng_async(4). 492NETGRAPH 493NETGRAPH_DEBUG opt_netgraph.h 494NETGRAPH_ASYNC opt_netgraph.h 495NETGRAPH_ATMLLC opt_netgraph.h 496NETGRAPH_ATM_ATMPIF opt_netgraph.h 497NETGRAPH_BLUETOOTH opt_netgraph.h 498NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 499NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 500NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 501NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 502NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 503NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 504NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 505NETGRAPH_BPF opt_netgraph.h 506NETGRAPH_BRIDGE opt_netgraph.h 507NETGRAPH_CAR opt_netgraph.h 508NETGRAPH_CHECKSUM opt_netgraph.h 509NETGRAPH_CISCO opt_netgraph.h 510NETGRAPH_DEFLATE opt_netgraph.h 511NETGRAPH_DEVICE opt_netgraph.h 512NETGRAPH_ECHO opt_netgraph.h 513NETGRAPH_EIFACE opt_netgraph.h 514NETGRAPH_ETHER opt_netgraph.h 515NETGRAPH_ETHER_ECHO opt_netgraph.h 516NETGRAPH_FEC opt_netgraph.h 517NETGRAPH_FRAME_RELAY opt_netgraph.h 518NETGRAPH_GIF opt_netgraph.h 519NETGRAPH_GIF_DEMUX opt_netgraph.h 520NETGRAPH_HOLE opt_netgraph.h 521NETGRAPH_IFACE opt_netgraph.h 522NETGRAPH_IP_INPUT opt_netgraph.h 523NETGRAPH_IPFW opt_netgraph.h 524NETGRAPH_KSOCKET opt_netgraph.h 525NETGRAPH_L2TP opt_netgraph.h 526NETGRAPH_LMI opt_netgraph.h 527NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 528NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 529NETGRAPH_NAT opt_netgraph.h 530NETGRAPH_NETFLOW opt_netgraph.h 531NETGRAPH_ONE2MANY opt_netgraph.h 532NETGRAPH_PATCH opt_netgraph.h 533NETGRAPH_PIPE opt_netgraph.h 534NETGRAPH_PPP opt_netgraph.h 535NETGRAPH_PPPOE opt_netgraph.h 536NETGRAPH_PPTPGRE opt_netgraph.h 537NETGRAPH_PRED1 opt_netgraph.h 538NETGRAPH_RFC1490 opt_netgraph.h 539NETGRAPH_SOCKET opt_netgraph.h 540NETGRAPH_SPLIT opt_netgraph.h 541NETGRAPH_SPPP opt_netgraph.h 542NETGRAPH_TAG opt_netgraph.h 543NETGRAPH_TCPMSS opt_netgraph.h 544NETGRAPH_TEE opt_netgraph.h 545NETGRAPH_TTY opt_netgraph.h 546NETGRAPH_UI opt_netgraph.h 547NETGRAPH_VJC opt_netgraph.h 548NETGRAPH_VLAN opt_netgraph.h 549 550# NgATM options 551NGATM_ATM opt_netgraph.h 552NGATM_ATMBASE opt_netgraph.h 553NGATM_SSCOP opt_netgraph.h 554NGATM_SSCFU opt_netgraph.h 555NGATM_UNI opt_netgraph.h 556NGATM_CCATM opt_netgraph.h 557 558# DRM options 559DRM_DEBUG opt_drm.h 560 561TI_SF_BUF_JUMBO opt_ti.h 562TI_JUMBO_HDRSPLIT opt_ti.h 563 564# Misc debug flags. Most of these should probably be replaced with 565# 'DEBUG', and then let people recompile just the interesting modules 566# with 'make CC="cc -DDEBUG"'. 567CLUSTERDEBUG opt_debug_cluster.h 568DEBUG_1284 opt_ppb_1284.h 569VP0_DEBUG opt_vpo.h 570LPT_DEBUG opt_lpt.h 571PLIP_DEBUG opt_plip.h 572LOCKF_DEBUG opt_debug_lockf.h 573SI_DEBUG opt_debug_si.h 574IFMEDIA_DEBUG opt_ifmedia.h 575 576# Fb options 577FB_DEBUG opt_fb.h 578FB_INSTALL_CDEV opt_fb.h 579 580# ppbus related options 581PERIPH_1284 opt_ppb_1284.h 582DONTPROBE_1284 opt_ppb_1284.h 583 584# smbus related options 585ENABLE_ALART opt_intpm.h 586 587# These cause changes all over the kernel 588BLKDEV_IOSIZE opt_global.h 589BURN_BRIDGES opt_global.h 590DEBUG opt_global.h 591DEBUG_LOCKS opt_global.h 592DEBUG_VFS_LOCKS opt_global.h 593DFLTPHYS opt_global.h 594DIAGNOSTIC opt_global.h 595INVARIANT_SUPPORT opt_global.h 596INVARIANTS opt_global.h 597KASSERT_PANIC_OPTIONAL opt_global.h 598MAXCPU opt_global.h 599MAXMEMDOM opt_global.h 600MAXPHYS opt_global.h 601MCLSHIFT opt_global.h 602MUTEX_NOINLINE opt_global.h 603LOCK_PROFILING opt_global.h 604LOCK_PROFILING_FAST opt_global.h 605MSIZE opt_global.h 606REGRESSION opt_global.h 607RWLOCK_NOINLINE opt_global.h 608SX_NOINLINE opt_global.h 609VFS_BIO_DEBUG opt_global.h 610 611# These are VM related options 612VM_KMEM_SIZE opt_vm.h 613VM_KMEM_SIZE_SCALE opt_vm.h 614VM_KMEM_SIZE_MAX opt_vm.h 615VM_NRESERVLEVEL opt_vm.h 616VM_LEVEL_0_ORDER opt_vm.h 617NO_SWAPPING opt_vm.h 618MALLOC_MAKE_FAILURES opt_vm.h 619MALLOC_PROFILE opt_vm.h 620MALLOC_DEBUG_MAXZONES opt_vm.h 621 622# The MemGuard replacement allocator used for tamper-after-free detection 623DEBUG_MEMGUARD opt_vm.h 624 625# The RedZone malloc(9) protection 626DEBUG_REDZONE opt_vm.h 627 628# Standard SMP options 629EARLY_AP_STARTUP opt_global.h 630SMP opt_global.h 631NUMA opt_global.h 632 633# Size of the kernel message buffer 634MSGBUF_SIZE opt_msgbuf.h 635 636# NFS options 637NFS_MINATTRTIMO opt_nfs.h 638NFS_MAXATTRTIMO opt_nfs.h 639NFS_MINDIRATTRTIMO opt_nfs.h 640NFS_MAXDIRATTRTIMO opt_nfs.h 641NFS_DEBUG opt_nfs.h 642 643# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 644OVERRIDE_CARD opt_bktr.h 645OVERRIDE_TUNER opt_bktr.h 646OVERRIDE_DBX opt_bktr.h 647OVERRIDE_MSP opt_bktr.h 648BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 649BROOKTREE_ALLOC_PAGES opt_bktr.h 650BKTR_OVERRIDE_CARD opt_bktr.h 651BKTR_OVERRIDE_TUNER opt_bktr.h 652BKTR_OVERRIDE_DBX opt_bktr.h 653BKTR_OVERRIDE_MSP opt_bktr.h 654BKTR_SYSTEM_DEFAULT opt_bktr.h 655BKTR_ALLOC_PAGES opt_bktr.h 656BKTR_USE_PLL opt_bktr.h 657BKTR_GPIO_ACCESS opt_bktr.h 658BKTR_NO_MSP_RESET opt_bktr.h 659BKTR_430_FX_MODE opt_bktr.h 660BKTR_SIS_VIA_MODE opt_bktr.h 661BKTR_USE_FREEBSD_SMBUS opt_bktr.h 662BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 663 664# Options for uart(4) 665UART_PPS_ON_CTS opt_uart.h 666UART_POLL_FREQ opt_uart.h 667UART_DEV_TOLERANCE_PCT opt_uart.h 668 669# options for bus/device framework 670BUS_DEBUG opt_bus.h 671 672# options for USB support 673USB_DEBUG opt_usb.h 674USB_HOST_ALIGN opt_usb.h 675USB_REQ_DEBUG opt_usb.h 676USB_TEMPLATE opt_usb.h 677USB_VERBOSE opt_usb.h 678USB_DMA_SINGLE_ALLOC opt_usb.h 679USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 680U3G_DEBUG opt_u3g.h 681UKBD_DFLT_KEYMAP opt_ukbd.h 682UPLCOM_INTR_INTERVAL opt_uplcom.h 683UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 684UVSCOM_INTR_INTERVAL opt_uvscom.h 685 686# options for the Realtek rtwn driver 687RTWN_DEBUG opt_rtwn.h 688RTWN_WITHOUT_UCODE opt_rtwn.h 689 690# Embedded system options 691INIT_PATH 692 693ROOTDEVNAME 694 695FDC_DEBUG opt_fdc.h 696PCFCLOCK_VERBOSE opt_pcfclock.h 697PCFCLOCK_MAX_RETRIES opt_pcfclock.h 698 699KTR opt_global.h 700KTR_ALQ opt_ktr.h 701KTR_MASK opt_ktr.h 702KTR_CPUMASK opt_ktr.h 703KTR_COMPILE opt_global.h 704KTR_BOOT_ENTRIES opt_global.h 705KTR_ENTRIES opt_global.h 706KTR_VERBOSE opt_ktr.h 707WITNESS opt_global.h 708WITNESS_KDB opt_witness.h 709WITNESS_NO_VNODE opt_witness.h 710WITNESS_SKIPSPIN opt_witness.h 711WITNESS_COUNT opt_witness.h 712OPENSOLARIS_WITNESS opt_global.h 713 714# options for ACPI support 715ACPI_DEBUG opt_acpi.h 716ACPI_MAX_TASKS opt_acpi.h 717ACPI_MAX_THREADS opt_acpi.h 718ACPI_DMAR opt_acpi.h 719DEV_ACPI opt_acpi.h 720 721# ISA support 722DEV_ISA opt_isa.h 723ISAPNP opt_isa.h 724 725# various 'device presence' options. 726DEV_BPF opt_bpf.h 727DEV_CARP opt_carp.h 728DEV_NETMAP opt_global.h 729DEV_PCI opt_pci.h 730DEV_PF opt_pf.h 731DEV_PFLOG opt_pf.h 732DEV_PFSYNC opt_pf.h 733DEV_RANDOM opt_global.h 734DEV_SPLASH opt_splash.h 735DEV_VLAN opt_vlan.h 736 737# ed driver 738ED_HPP opt_ed.h 739ED_3C503 opt_ed.h 740ED_SIC opt_ed.h 741 742# bce driver 743BCE_DEBUG opt_bce.h 744BCE_NVRAM_WRITE_SUPPORT opt_bce.h 745 746SOCKBUF_DEBUG opt_global.h 747 748 749# options for ubsec driver 750UBSEC_DEBUG opt_ubsec.h 751UBSEC_RNDTEST opt_ubsec.h 752UBSEC_NO_RNG opt_ubsec.h 753 754# options for hifn driver 755HIFN_DEBUG opt_hifn.h 756HIFN_RNDTEST opt_hifn.h 757 758# options for safenet driver 759SAFE_DEBUG opt_safe.h 760SAFE_NO_RNG opt_safe.h 761SAFE_RNDTEST opt_safe.h 762 763# syscons/vt options 764MAXCONS opt_syscons.h 765SC_ALT_MOUSE_IMAGE opt_syscons.h 766SC_CUT_SPACES2TABS opt_syscons.h 767SC_CUT_SEPCHARS opt_syscons.h 768SC_DEBUG_LEVEL opt_syscons.h 769SC_DFLT_FONT opt_syscons.h 770SC_DFLT_TERM opt_syscons.h 771SC_DISABLE_KDBKEY opt_syscons.h 772SC_DISABLE_REBOOT opt_syscons.h 773SC_HISTORY_SIZE opt_syscons.h 774SC_KERNEL_CONS_ATTR opt_syscons.h 775SC_KERNEL_CONS_ATTRS opt_syscons.h 776SC_KERNEL_CONS_REV_ATTR opt_syscons.h 777SC_MOUSE_CHAR opt_syscons.h 778SC_NO_CUTPASTE opt_syscons.h 779SC_NO_FONT_LOADING opt_syscons.h 780SC_NO_HISTORY opt_syscons.h 781SC_NO_MODE_CHANGE opt_syscons.h 782SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 783SC_NO_SYSMOUSE opt_syscons.h 784SC_NO_TERM_DUMB opt_syscons.h 785SC_NO_TERM_SC opt_syscons.h 786SC_NO_TERM_TEKEN opt_syscons.h 787SC_NORM_ATTR opt_syscons.h 788SC_NORM_REV_ATTR opt_syscons.h 789SC_PIXEL_MODE opt_syscons.h 790SC_RENDER_DEBUG opt_syscons.h 791SC_TWOBUTTON_MOUSE opt_syscons.h 792VT_ALT_TO_ESC_HACK opt_syscons.h 793VT_FB_DEFAULT_WIDTH opt_syscons.h 794VT_FB_DEFAULT_HEIGHT opt_syscons.h 795VT_MAXWINDOWS opt_syscons.h 796VT_TWOBUTTON_MOUSE opt_syscons.h 797DEV_SC opt_syscons.h 798DEV_VT opt_syscons.h 799 800# teken terminal emulator options 801TEKEN_CONS25 opt_teken.h 802TEKEN_UTF8 opt_teken.h 803TERMINAL_KERN_ATTR opt_teken.h 804TERMINAL_NORM_ATTR opt_teken.h 805 806# options for printf 807PRINTF_BUFR_SIZE opt_printf.h 808BOOT_TAG opt_printf.h 809BOOT_TAG_SZ opt_printf.h 810 811# kbd options 812KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 813KBD_INSTALL_CDEV opt_kbd.h 814KBD_MAXRETRY opt_kbd.h 815KBD_MAXWAIT opt_kbd.h 816KBD_RESETDELAY opt_kbd.h 817KBDIO_DEBUG opt_kbd.h 818 819KBDMUX_DFLT_KEYMAP opt_kbdmux.h 820 821# options for the Atheros driver 822ATH_DEBUG opt_ath.h 823ATH_TXBUF opt_ath.h 824ATH_RXBUF opt_ath.h 825ATH_DIAGAPI opt_ath.h 826ATH_TX99_DIAG opt_ath.h 827ATH_ENABLE_11N opt_ath.h 828ATH_ENABLE_DFS opt_ath.h 829ATH_EEPROM_FIRMWARE opt_ath.h 830ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 831ATH_DEBUG_ALQ opt_ath.h 832ATH_KTR_INTR_DEBUG opt_ath.h 833 834# options for the Atheros hal 835# XXX For now, this breaks non-AR9130 chipsets, so only use it 836# XXX when actually targeting AR9130. 837AH_SUPPORT_AR9130 opt_ah.h 838 839# This is required for AR933x SoC support 840AH_SUPPORT_AR9330 opt_ah.h 841AH_SUPPORT_AR9340 opt_ah.h 842AH_SUPPORT_QCA9530 opt_ah.h 843AH_SUPPORT_QCA9550 opt_ah.h 844 845AH_DEBUG opt_ah.h 846AH_ASSERT opt_ah.h 847AH_DEBUG_ALQ opt_ah.h 848AH_REGOPS_FUNC opt_ah.h 849AH_WRITE_REGDOMAIN opt_ah.h 850AH_DEBUG_COUNTRY opt_ah.h 851AH_WRITE_EEPROM opt_ah.h 852AH_PRIVATE_DIAG opt_ah.h 853AH_NEED_DESC_SWAP opt_ah.h 854AH_USE_INIPDGAIN opt_ah.h 855AH_MAXCHAN opt_ah.h 856AH_RXCFG_SDMAMW_4BYTES opt_ah.h 857AH_INTERRUPT_DEBUGGING opt_ah.h 858# AR5416 and later interrupt mitigation 859# XXX do not use this for AR9130 860AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 861 862# options for the Broadcom BCM43xx driver (bwi) 863BWI_DEBUG opt_bwi.h 864BWI_DEBUG_VERBOSE opt_bwi.h 865 866# options for the Brodacom BCM43xx driver (bwn) 867BWN_DEBUG opt_bwn.h 868BWN_GPL_PHY opt_bwn.h 869BWN_USE_SIBA opt_bwn.h 870 871# Options for the SIBA driver 872SIBA_DEBUG opt_siba.h 873 874# options for the Marvell 8335 wireless driver 875MALO_DEBUG opt_malo.h 876MALO_TXBUF opt_malo.h 877MALO_RXBUF opt_malo.h 878 879# options for the Marvell wireless driver 880MWL_DEBUG opt_mwl.h 881MWL_TXBUF opt_mwl.h 882MWL_RXBUF opt_mwl.h 883MWL_DIAGAPI opt_mwl.h 884MWL_AGGR_SIZE opt_mwl.h 885MWL_TX_NODROP opt_mwl.h 886 887# Options for the Marvell NETA driver 888MVNETA_MULTIQUEUE opt_mvneta.h 889MVNETA_KTR opt_mvneta.h 890 891# Options for the Intel 802.11ac wireless driver 892IWM_DEBUG opt_iwm.h 893 894# Options for the Intel 802.11n wireless driver 895IWN_DEBUG opt_iwn.h 896 897# Options for the Intel 3945ABG wireless driver 898WPI_DEBUG opt_wpi.h 899 900# dcons options 901DCONS_BUF_SIZE opt_dcons.h 902DCONS_POLL_HZ opt_dcons.h 903DCONS_FORCE_CONSOLE opt_dcons.h 904DCONS_FORCE_GDB opt_dcons.h 905 906# HWPMC options 907HWPMC_DEBUG opt_global.h 908HWPMC_HOOKS 909HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h 910 911# 802.11 support layer 912IEEE80211_DEBUG opt_wlan.h 913IEEE80211_DEBUG_REFCNT opt_wlan.h 914IEEE80211_SUPPORT_MESH opt_wlan.h 915IEEE80211_SUPPORT_SUPERG opt_wlan.h 916IEEE80211_SUPPORT_TDMA opt_wlan.h 917IEEE80211_ALQ opt_wlan.h 918IEEE80211_DFS_DEBUG opt_wlan.h 919 920# 802.11 TDMA support 921TDMA_SLOTLEN_DEFAULT opt_tdma.h 922TDMA_SLOTCNT_DEFAULT opt_tdma.h 923TDMA_BINTVAL_DEFAULT opt_tdma.h 924TDMA_TXRATE_11B_DEFAULT opt_tdma.h 925TDMA_TXRATE_11G_DEFAULT opt_tdma.h 926TDMA_TXRATE_11A_DEFAULT opt_tdma.h 927TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 928TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 929TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 930TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 931TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 932 933# VideoMode 934PICKMODE_DEBUG opt_videomode.h 935 936# Network stack virtualization options 937VIMAGE opt_global.h 938VNET_DEBUG opt_global.h 939 940# Common Flash Interface (CFI) options 941CFI_SUPPORT_STRATAFLASH opt_cfi.h 942CFI_ARMEDANDDANGEROUS opt_cfi.h 943CFI_HARDWAREBYTESWAP opt_cfi.h 944 945# Sound options 946SND_DEBUG opt_snd.h 947SND_DIAGNOSTIC opt_snd.h 948SND_FEEDER_MULTIFORMAT opt_snd.h 949SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 950SND_FEEDER_RATE_HP opt_snd.h 951SND_PCM_64 opt_snd.h 952SND_OLDSTEREO opt_snd.h 953 954X86BIOS 955 956# Flattened device tree options 957FDT opt_platform.h 958FDT_DTB_STATIC opt_platform.h 959 960# OFED Infiniband stack 961OFED opt_ofed.h 962OFED_DEBUG_INIT opt_ofed.h 963SDP opt_ofed.h 964SDP_DEBUG opt_ofed.h 965IPOIB opt_ofed.h 966IPOIB_DEBUG opt_ofed.h 967IPOIB_CM opt_ofed.h 968 969# Resource Accounting 970RACCT opt_global.h 971RACCT_DEFAULT_TO_DISABLED opt_global.h 972 973# Resource Limits 974RCTL opt_global.h 975 976# Random number generator(s) 977# With this, no entropy processor is loaded, but the entropy 978# harvesting infrastructure is present. This means an entropy 979# processor may be loaded as a module. 980RANDOM_LOADABLE opt_global.h 981# This turns on high-rate and potentially expensive harvesting in 982# the uma slab allocator. 983RANDOM_ENABLE_UMA opt_global.h 984RANDOM_ENABLE_ETHER opt_global.h 985 986# BHND(4) driver 987BHND_LOGLEVEL opt_global.h 988 989# GPIO and child devices 990GPIO_SPI_DEBUG opt_gpio.h 991 992# SPI devices 993SPIGEN_LEGACY_CDEVNAME opt_spi.h 994 995# etherswitch(4) driver 996RTL8366_SOFT_RESET opt_etherswitch.h 997 998# evdev protocol support 999EVDEV_SUPPORT opt_evdev.h 1000EVDEV_DEBUG opt_evdev.h 1001UINPUT_DEBUG opt_evdev.h 1002 1003# Hyper-V network driver 1004HN_DEBUG opt_hn.h 1005 1006# CAM-based MMC stack 1007MMCCAM 1008# Encrypted kernel crash dumps 1009EKCD opt_ekcd.h 1010 1011# NVME options 1012NVME_USE_NVD opt_nvme.h 1013 1014# amdsbwd options 1015AMDSBWD_DEBUG opt_amdsbwd.h 1016 1017# gcov support 1018GCOV opt_global.h 1019LINDEBUGFS 1020