1# 2# On the handling of kernel options 3# 4# All kernel options should be listed in NOTES, with suitable 5# descriptions. Negative options (options that make some code not 6# compile) should be commented out; LINT (generated from NOTES) should 7# compile as much code as possible. Try to structure option-using 8# code so that a single option only switch code on, or only switch 9# code off, to make it possible to have a full compile-test. If 10# necessary, you can check for COMPILING_LINT to get maximum code 11# coverage. 12# 13# All new options shall also be listed in either "conf/options" or 14# "conf/options.<machine>". Options that affect a single source-file 15# <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options 16# that affect multiple files should either go in "opt_global.h" if 17# this is a kernel-wide option (used just about everywhere), or in 18# "opt_<option-name-in-lower-case>.h" if it affects only some files. 19# Note that the effect of listing only an option without a 20# header-file-name in conf/options (and cousins) is that the last 21# convention is followed. 22# 23# This handling scheme is not yet fully implemented. 24# 25# 26# Format of this file: 27# Option name filename 28# 29# If filename is missing, the default is 30# opt_<name-of-option-in-lower-case>.h 31 32AAC_DEBUG opt_aac.h 33AACRAID_DEBUG opt_aacraid.h 34AHC_ALLOW_MEMIO opt_aic7xxx.h 35AHC_TMODE_ENABLE opt_aic7xxx.h 36AHC_DUMP_EEPROM opt_aic7xxx.h 37AHC_DEBUG opt_aic7xxx.h 38AHC_DEBUG_OPTS opt_aic7xxx.h 39AHC_REG_PRETTY_PRINT opt_aic7xxx.h 40AHD_DEBUG opt_aic79xx.h 41AHD_DEBUG_OPTS opt_aic79xx.h 42AHD_TMODE_ENABLE opt_aic79xx.h 43AHD_REG_PRETTY_PRINT opt_aic79xx.h 44 45# Debugging options. 46ALT_BREAK_TO_DEBUGGER opt_kdb.h 47BREAK_TO_DEBUGGER opt_kdb.h 48BUF_TRACKING opt_global.h 49DDB 50DDB_BUFR_SIZE opt_ddb.h 51DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h 52DDB_CAPTURE_MAXBUFSIZE opt_ddb.h 53DDB_CTF opt_ddb.h 54DDB_NUMSYM opt_ddb.h 55EARLY_PRINTF opt_global.h 56FULL_BUF_TRACKING opt_global.h 57GDB 58KDB opt_global.h 59KDB_TRACE opt_kdb.h 60KDB_UNATTENDED opt_kdb.h 61KLD_DEBUG opt_kld.h 62NUM_CORE_FILES opt_global.h 63QUEUE_MACRO_DEBUG_TRACE opt_global.h 64QUEUE_MACRO_DEBUG_TRASH opt_global.h 65SYSCTL_DEBUG opt_sysctl.h 66TEXTDUMP_PREFERRED opt_ddb.h 67TEXTDUMP_VERBOSE opt_ddb.h 68TSLOG opt_global.h 69TSLOG_PAGEZERO opt_global.h 70TSLOGSIZE opt_global.h 71 72# Miscellaneous options. 73ALQ 74ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h 75ATSE_CFI_HACK opt_cfi.h 76AUDIT opt_global.h 77BOOTHOWTO opt_global.h 78BOOTVERBOSE opt_global.h 79CALLOUT_PROFILING 80CAPABILITIES opt_capsicum.h 81CAPABILITY_MODE opt_capsicum.h 82CC_CDG opt_global.h 83CC_CHD opt_global.h 84CC_CUBIC opt_global.h 85CC_DEFAULT opt_cc.h 86CC_DCTCP opt_global.h 87CC_HD opt_global.h 88CC_HTCP opt_global.h 89CC_NEWRENO opt_global.h 90CC_VEGAS opt_global.h 91COMPAT_43 opt_global.h 92COMPAT_43TTY opt_global.h 93COMPAT_FREEBSD4 opt_global.h 94COMPAT_FREEBSD5 opt_global.h 95COMPAT_FREEBSD6 opt_global.h 96COMPAT_FREEBSD7 opt_global.h 97COMPAT_FREEBSD9 opt_global.h 98COMPAT_FREEBSD10 opt_global.h 99COMPAT_FREEBSD11 opt_global.h 100COMPAT_FREEBSD12 opt_global.h 101COMPAT_FREEBSD13 opt_global.h 102COMPAT_FREEBSD14 opt_global.h 103COMPAT_LINUXKPI opt_dontuse.h 104COMPILING_LINT opt_global.h 105CY_PCI_FASTINTR 106DEADLKRES opt_watchdog.h 107EXPERIMENTAL opt_global.h 108DIRECTIO 109FILEMON opt_dontuse.h 110FFCLOCK 111FULL_PREEMPTION opt_sched.h 112GZIO opt_gzio.h 113IMGACT_BINMISC opt_dontuse.h 114IPI_PREEMPTION opt_sched.h 115GEOM_BDE opt_geom.h 116GEOM_CACHE opt_geom.h 117GEOM_CONCAT opt_geom.h 118GEOM_ELI opt_geom.h 119GEOM_GATE opt_geom.h 120GEOM_JOURNAL opt_geom.h 121GEOM_LABEL opt_geom.h 122GEOM_LABEL_GPT opt_geom.h 123GEOM_LINUX_LVM opt_geom.h 124GEOM_MAP opt_geom.h 125GEOM_MIRROR opt_geom.h 126GEOM_MOUNTVER opt_geom.h 127GEOM_MULTIPATH opt_geom.h 128GEOM_NOP opt_geom.h 129GEOM_PART_APM opt_geom.h 130GEOM_PART_BSD opt_geom.h 131GEOM_PART_BSD64 opt_geom.h 132GEOM_PART_EBR opt_geom.h 133GEOM_PART_GPT opt_geom.h 134GEOM_PART_LDM opt_geom.h 135GEOM_PART_MBR opt_geom.h 136GEOM_RAID opt_geom.h 137GEOM_RAID3 opt_geom.h 138GEOM_SHSEC opt_geom.h 139GEOM_STRIPE opt_geom.h 140GEOM_UZIP opt_geom.h 141GEOM_UZIP_DEBUG opt_geom.h 142GEOM_VINUM opt_geom.h 143GEOM_VIRSTOR opt_geom.h 144GEOM_ZERO opt_geom.h 145IFLIB opt_iflib.h 146KDTRACE_HOOKS opt_global.h 147KDTRACE_FRAME opt_kdtrace.h 148KDTRACE_NO_MIB_SDT opt_global.h 149KN_HASHSIZE opt_kqueue.h 150KSTACK_MAX_PAGES 151KSTACK_PAGES 152KSTACK_USAGE_PROF 153KTRACE 154KTRACE_REQUEST_POOL opt_ktrace.h 155LIBICONV 156MAC opt_global.h 157MAC_BIBA opt_dontuse.h 158MAC_BSDEXTENDED opt_dontuse.h 159MAC_DDB opt_dontuse.h 160MAC_DEBUG opt_mac.h 161MAC_IFOFF opt_dontuse.h 162MAC_IPACL opt_dontuse.h 163MAC_LOMAC opt_dontuse.h 164MAC_MLS opt_dontuse.h 165MAC_NONE opt_dontuse.h 166MAC_NTPD opt_dontuse.h 167MAC_PARTITION opt_dontuse.h 168MAC_PORTACL opt_dontuse.h 169MAC_PRIORITY opt_dontuse.h 170MAC_SEEOTHERUIDS opt_dontuse.h 171MAC_STATIC opt_mac.h 172MAC_STUB opt_dontuse.h 173MAC_TEST opt_dontuse.h 174MAC_GRANTBYLABEL opt_dontuse.h 175MAC_VERIEXEC opt_dontuse.h 176MAC_VERIEXEC_DEBUG opt_mac.h 177MAC_VERIEXEC_SHA1 opt_dontuse.h 178MAC_VERIEXEC_SHA256 opt_dontuse.h 179MAC_VERIEXEC_SHA384 opt_dontuse.h 180MAC_VERIEXEC_SHA512 opt_dontuse.h 181MD_ROOT opt_md.h 182MD_ROOT_FSTYPE opt_md.h 183MD_ROOT_READONLY opt_md.h 184MD_ROOT_SIZE opt_md.h 185MD_ROOT_MEM opt_md.h 186MFI_DEBUG opt_mfi.h 187MFI_DECODE_LOG opt_mfi.h 188MPROF_BUFFERS opt_mprof.h 189MPROF_HASH_SIZE opt_mprof.h 190NEW_PCIB opt_global.h 191NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h 192NO_ADAPTIVE_RWLOCKS 193NO_ADAPTIVE_SX 194NO_OBSOLETE_CODE opt_global.h 195NO_SYSCTL_DESCR opt_global.h 196NSWBUF_MIN opt_param.h 197MBUF_PACKET_ZONE_DISABLE opt_global.h 198PANIC_REBOOT_WAIT_TIME opt_panic.h 199PCI_HP opt_pci.h 200PCI_IOV opt_global.h 201PPC_DEBUG opt_ppc.h 202PPC_PROBE_CHIPSET opt_ppc.h 203PPS_SYNC opt_ntp.h 204PREEMPTION opt_sched.h 205QUOTA 206SCHED_4BSD opt_sched.h 207SCHED_STATS opt_sched.h 208SCHED_ULE opt_sched.h 209SLEEPQUEUE_PROFILING 210SLHCI_DEBUG opt_slhci.h 211STACK opt_stack.h 212SUIDDIR 213MSGMNB opt_sysvipc.h 214MSGMNI opt_sysvipc.h 215MSGSEG opt_sysvipc.h 216MSGSSZ opt_sysvipc.h 217MSGTQL opt_sysvipc.h 218SEMMNI opt_sysvipc.h 219SEMMNS opt_sysvipc.h 220SEMMNU opt_sysvipc.h 221SEMMSL opt_sysvipc.h 222SEMOPM opt_sysvipc.h 223SEMUME opt_sysvipc.h 224SHMALL opt_sysvipc.h 225SHMMAX opt_sysvipc.h 226SHMMAXPGS opt_sysvipc.h 227SHMMIN opt_sysvipc.h 228SHMMNI opt_sysvipc.h 229SHMSEG opt_sysvipc.h 230SYSVMSG opt_sysvipc.h 231SYSVSEM opt_sysvipc.h 232SYSVSHM opt_sysvipc.h 233SW_WATCHDOG opt_watchdog.h 234TCPHPTS 235TCP_REQUEST_TRK opt_global.h 236TCP_ACCOUNTING opt_global.h 237TCP_BBR opt_inet.h 238TCP_RACK opt_inet.h 239# 240# TCP SaD Detection is an experimental Sack attack Detection (SaD) 241# algorithm that uses "normal" behaviour with SACK's to detect 242# a possible attack. It is strictly experimental at this point. 243# 244TCP_SAD_DETECTION opt_inet.h 245TURNSTILE_PROFILING 246UMTX_PROFILING 247UMTX_CHAINS opt_global.h 248VERBOSE_SYSINIT 249ZSTDIO opt_zstdio.h 250 251# Sanitizers 252COVERAGE opt_global.h 253KASAN opt_global.h 254KCOV 255KCSAN opt_global.h 256KMSAN opt_global.h 257KUBSAN opt_global.h 258 259# POSIX kernel options 260P1003_1B_MQUEUE opt_posix.h 261P1003_1B_SEMAPHORES opt_posix.h 262_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 263 264# Do we want the config file compiled into the kernel? 265INCLUDE_CONFIG_FILE opt_config.h 266 267# Options for static filesystems. These should only be used at config 268# time, since the corresponding lkms cannot work if there are any static 269# dependencies. Unusability is enforced by hiding the defines for the 270# options in a never-included header. 271AUTOFS opt_dontuse.h 272CD9660 opt_dontuse.h 273EXT2FS opt_dontuse.h 274FDESCFS opt_dontuse.h 275FFS opt_dontuse.h 276FUSEFS opt_dontuse.h 277MSDOSFS opt_dontuse.h 278NULLFS opt_dontuse.h 279PROCFS opt_dontuse.h 280PSEUDOFS opt_dontuse.h 281SMBFS opt_dontuse.h 282TARFS opt_dontuse.h 283TMPFS opt_dontuse.h 284UDF opt_dontuse.h 285UNIONFS opt_dontuse.h 286ZFS opt_dontuse.h 287 288# Pseudofs debugging 289PSEUDOFS_TRACE opt_pseudofs.h 290 291# Tarfs debugging 292TARFS_DEBUG opt_tarfs.h 293 294# In-kernel GSS-API 295KGSSAPI opt_kgssapi.h 296KGSSAPI_DEBUG opt_kgssapi.h 297 298# These static filesystems have one slightly bogus static dependency in 299# sys/i386/i386/autoconf.c. If any of these filesystems are 300# statically compiled into the kernel, code for mounting them as root 301# filesystems will be enabled - but look below. 302# NFSCL - client 303# NFSD - server 304NFSCL opt_nfs.h 305NFSD opt_nfs.h 306 307# filesystems and libiconv bridge 308CD9660_ICONV opt_dontuse.h 309MSDOSFS_ICONV opt_dontuse.h 310UDF_ICONV opt_dontuse.h 311 312# If you are following the conditions in the copyright, 313# you can enable soft-updates which will speed up a lot of thigs 314# and make the system safer from crashes at the same time. 315# otherwise a STUB module will be compiled in. 316SOFTUPDATES opt_ffs.h 317 318# On small, embedded systems, it can be useful to turn off support for 319# snapshots. It saves about 30-40k for a feature that would be lightly 320# used, if it is used at all. 321NO_FFS_SNAPSHOT opt_ffs.h 322 323# Enabling this option turns on support for Access Control Lists in UFS, 324# which can be used to support high security configurations. Depends on 325# UFS_EXTATTR. 326UFS_ACL opt_ufs.h 327 328# Enabling this option turns on support for extended attributes in UFS-based 329# filesystems, which can be used to support high security configurations 330# as well as new filesystem features. 331UFS_EXTATTR opt_ufs.h 332UFS_EXTATTR_AUTOSTART opt_ufs.h 333 334# Enable fast hash lookups for large directories on UFS-based filesystems. 335UFS_DIRHASH opt_ufs.h 336 337# Enable gjournal-based UFS journal. 338UFS_GJOURNAL opt_ufs.h 339 340# The below sentence is not in English, and neither is this one. 341# We plan to remove the static dependences above, with a 342# <filesystem>_ROOT option to control if it usable as root. This list 343# allows these options to be present in config files already (though 344# they won't make any difference yet). 345NFS_ROOT opt_nfsroot.h 346 347# SMB/CIFS requester 348NETSMB opt_netsmb.h 349 350# Enable debugnet(4) networking support. 351DEBUGNET opt_global.h 352# Enable netdump(4) client support. 353NETDUMP opt_global.h 354# Enable netgdb(4) support. 355NETGDB opt_global.h 356 357# Options used only in subr_param.c. 358HZ opt_param.h 359MAXFILES opt_param.h 360NBUF opt_param.h 361NSFBUFS opt_param.h 362VM_BCACHE_SIZE_MAX opt_param.h 363VM_SWZONE_SIZE_MAX opt_param.h 364MAXUSERS 365DFLDSIZ opt_param.h 366MAXDSIZ opt_param.h 367MAXSSIZ opt_param.h 368 369# Generic SCSI options. 370CAM_MAX_HIGHPOWER opt_cam.h 371CAMDEBUG opt_cam.h 372CAM_DEBUG_COMPILE opt_cam.h 373CAM_DEBUG_DELAY opt_cam.h 374CAM_DEBUG_BUS opt_cam.h 375CAM_DEBUG_TARGET opt_cam.h 376CAM_DEBUG_LUN opt_cam.h 377CAM_DEBUG_FLAGS opt_cam.h 378CAM_BOOT_DELAY opt_cam.h 379CAM_IOSCHED_DYNAMIC opt_cam.h 380CAM_IO_STATS opt_cam.h 381CAM_TEST_FAILURE opt_cam.h 382SCSI_DELAY opt_scsi.h 383SCSI_NO_SENSE_STRINGS opt_scsi.h 384SCSI_NO_OP_STRINGS opt_scsi.h 385 386# Options used only in cam/ata/ata_da.c 387ATA_STATIC_ID opt_ada.h 388 389# Options used only in cam/scsi/scsi_cd.c 390CHANGER_MIN_BUSY_SECONDS opt_cd.h 391CHANGER_MAX_BUSY_SECONDS opt_cd.h 392 393# Options used only in cam/scsi/scsi_da.c 394DA_TRACK_REFS opt_da.h 395 396# Options used only in cam/scsi/scsi_sa.c. 397SA_IO_TIMEOUT opt_sa.h 398SA_SPACE_TIMEOUT opt_sa.h 399SA_REWIND_TIMEOUT opt_sa.h 400SA_ERASE_TIMEOUT opt_sa.h 401SA_1FM_AT_EOD opt_sa.h 402 403# Options used only in cam/scsi/scsi_pt.c 404SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 405 406# Options used only in cam/scsi/scsi_ses.c 407SES_ENABLE_PASSTHROUGH opt_ses.h 408 409# Options used in dev/sym/ (Symbios SCSI driver). 410SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 411 # disabled:0 (default), enabled:1 412SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 413 # disabled:0, enabled:1 (default) 414SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 415 # default:8, range:[1..64] 416 417# Options used only in dev/isp/* 418ISP_TARGET_MODE opt_isp.h 419ISP_FW_CRASH_DUMP opt_isp.h 420ISP_DEFAULT_ROLES opt_isp.h 421ISP_INTERNAL_TARGET opt_isp.h 422ISP_FCTAPE_OFF opt_isp.h 423 424# Net stuff. 425ACCEPT_FILTER_DATA 426ACCEPT_FILTER_DNS 427ACCEPT_FILTER_HTTP 428ALTQ opt_global.h 429ALTQ_CBQ opt_altq.h 430ALTQ_CDNR opt_altq.h 431ALTQ_CODEL opt_altq.h 432ALTQ_DEBUG opt_altq.h 433ALTQ_HFSC opt_altq.h 434ALTQ_FAIRQ opt_altq.h 435ALTQ_NOPCC opt_altq.h 436ALTQ_PRIQ opt_altq.h 437ALTQ_RED opt_altq.h 438ALTQ_RIO opt_altq.h 439BOOTP opt_bootp.h 440BOOTP_BLOCKSIZE opt_bootp.h 441BOOTP_COMPAT opt_bootp.h 442BOOTP_NFSROOT opt_bootp.h 443BOOTP_NFSV3 opt_bootp.h 444BOOTP_WIRED_TO opt_bootp.h 445DEVICE_POLLING 446DUMMYNET opt_ipdn.h 447RATELIMIT opt_ratelimit.h 448RATELIMIT_DEBUG opt_ratelimit.h 449INET opt_inet.h 450INET6 opt_inet6.h 451STATS opt_global.h 452IPDIVERT 453IPFILTER opt_ipfilter.h 454IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 455IPFILTER_LOG opt_ipfilter.h 456IPFILTER_LOOKUP opt_ipfilter.h 457IPFIREWALL opt_ipfw.h 458IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 459IPFIREWALL_NAT opt_ipfw.h 460IPFIREWALL_NAT64 opt_ipfw.h 461IPFIREWALL_NPTV6 opt_ipfw.h 462IPFIREWALL_VERBOSE opt_ipfw.h 463IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 464IPFIREWALL_PMOD opt_ipfw.h 465IPSEC opt_ipsec.h 466IPSEC_DEBUG opt_ipsec.h 467IPSEC_SUPPORT opt_ipsec.h 468IPSTEALTH 469KERN_TLS 470KRPC 471LIBALIAS 472LIBMCHAIN 473MBUF_PROFILING 474MBUF_STRESS_TEST 475MROUTING opt_mrouting.h 476NFSLOCKD 477NETLINK opt_global.h 478PF_DEFAULT_TO_DROP opt_pf.h 479ROUTE_MPATH opt_route.h 480ROUTETABLES opt_route.h 481FIB_ALGO opt_route.h 482RSS opt_rss.h 483SLIP_IFF_OPTS opt_slip.h 484TCPPCAP opt_global.h 485SIFTR 486TCP_BLACKBOX opt_global.h 487TCP_HHOOK opt_global.h 488TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading 489TCP_RFC7413 opt_inet.h 490TCP_RFC7413_MAX_KEYS opt_inet.h 491TCP_RFC7413_MAX_PSKS opt_inet.h 492TCP_SIGNATURE opt_ipsec.h 493VLAN_ARRAY opt_vlan.h 494XDR 495XBONEHACK 496 497# 498# SCTP 499# 500SCTP opt_sctp.h 501SCTP_SUPPORT opt_sctp.h 502SCTP_DEBUG opt_sctp.h # Enable debug printfs 503SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity 504SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free 505SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity 506SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets 507SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed 508SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. 509SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. 510SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs 511SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl 512SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats 513# 514# 515# 516 517# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 518# Each netgraph node type can be either be compiled into the kernel 519# or loaded dynamically. To get the former, include the corresponding 520# option below. Each type has its own man page, e.g. ng_async(4). 521NETGRAPH 522NETGRAPH_DEBUG opt_netgraph.h 523NETGRAPH_ASYNC opt_netgraph.h 524NETGRAPH_BLUETOOTH opt_netgraph.h 525NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h 526NETGRAPH_BLUETOOTH_H4 opt_netgraph.h 527NETGRAPH_BLUETOOTH_HCI opt_netgraph.h 528NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h 529NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h 530NETGRAPH_BLUETOOTH_UBT opt_netgraph.h 531NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h 532NETGRAPH_BPF opt_netgraph.h 533NETGRAPH_BRIDGE opt_netgraph.h 534NETGRAPH_CAR opt_netgraph.h 535NETGRAPH_CHECKSUM opt_netgraph.h 536NETGRAPH_CISCO opt_netgraph.h 537NETGRAPH_DEFLATE opt_netgraph.h 538NETGRAPH_DEVICE opt_netgraph.h 539NETGRAPH_ECHO opt_netgraph.h 540NETGRAPH_EIFACE opt_netgraph.h 541NETGRAPH_ETHER opt_netgraph.h 542NETGRAPH_ETHER_ECHO opt_netgraph.h 543NETGRAPH_FEC opt_netgraph.h 544NETGRAPH_FRAME_RELAY opt_netgraph.h 545NETGRAPH_GIF opt_netgraph.h 546NETGRAPH_GIF_DEMUX opt_netgraph.h 547NETGRAPH_HOLE opt_netgraph.h 548NETGRAPH_IFACE opt_netgraph.h 549NETGRAPH_IP_INPUT opt_netgraph.h 550NETGRAPH_IPFW opt_netgraph.h 551NETGRAPH_KSOCKET opt_netgraph.h 552NETGRAPH_L2TP opt_netgraph.h 553NETGRAPH_LMI opt_netgraph.h 554NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 555NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 556NETGRAPH_NAT opt_netgraph.h 557NETGRAPH_NETFLOW opt_netgraph.h 558NETGRAPH_ONE2MANY opt_netgraph.h 559NETGRAPH_PATCH opt_netgraph.h 560NETGRAPH_PIPE opt_netgraph.h 561NETGRAPH_PPP opt_netgraph.h 562NETGRAPH_PPPOE opt_netgraph.h 563NETGRAPH_PPTPGRE opt_netgraph.h 564NETGRAPH_PRED1 opt_netgraph.h 565NETGRAPH_RFC1490 opt_netgraph.h 566NETGRAPH_SOCKET opt_netgraph.h 567NETGRAPH_SPLIT opt_netgraph.h 568NETGRAPH_SPPP opt_netgraph.h 569NETGRAPH_TAG opt_netgraph.h 570NETGRAPH_TCPMSS opt_netgraph.h 571NETGRAPH_TEE opt_netgraph.h 572NETGRAPH_TTY opt_netgraph.h 573NETGRAPH_UI opt_netgraph.h 574NETGRAPH_VJC opt_netgraph.h 575NETGRAPH_VLAN opt_netgraph.h 576 577# DRM options 578DRM_DEBUG opt_drm.h 579 580TI_SF_BUF_JUMBO opt_ti.h 581TI_JUMBO_HDRSPLIT opt_ti.h 582 583# Misc debug flags. Most of these should probably be replaced with 584# 'DEBUG', and then let people recompile just the interesting modules 585# with 'make CC="cc -DDEBUG"'. 586DEBUG_1284 opt_ppb_1284.h 587LPT_DEBUG opt_lpt.h 588PLIP_DEBUG opt_plip.h 589LOCKF_DEBUG opt_debug_lockf.h 590SI_DEBUG opt_debug_si.h 591IFMEDIA_DEBUG opt_ifmedia.h 592 593# Fb options 594FB_DEBUG opt_fb.h 595 596# ppbus related options 597PERIPH_1284 opt_ppb_1284.h 598DONTPROBE_1284 opt_ppb_1284.h 599 600# smbus related options 601ENABLE_ALART opt_intpm.h 602 603# These cause changes all over the kernel 604BLKDEV_IOSIZE opt_global.h 605BURN_BRIDGES opt_global.h 606DEBUG opt_global.h 607DEBUG_LOCKS opt_global.h 608DEBUG_VFS_LOCKS opt_global.h 609DFLTPHYS opt_global.h 610DIAGNOSTIC opt_global.h 611INVARIANT_SUPPORT opt_global.h 612INVARIANTS opt_global.h 613KASSERT_PANIC_OPTIONAL opt_global.h 614MAXCPU opt_global.h 615MAXMEMDOM opt_global.h 616MAXPHYS opt_maxphys.h 617MCLSHIFT opt_global.h 618MUTEX_NOINLINE opt_global.h 619LOCK_PROFILING opt_global.h 620MSIZE opt_global.h 621REGRESSION opt_global.h 622RWLOCK_NOINLINE opt_global.h 623SX_NOINLINE opt_global.h 624VFS_BIO_DEBUG opt_global.h 625 626# These are VM related options 627VM_KMEM_SIZE opt_vm.h 628VM_KMEM_SIZE_SCALE opt_vm.h 629VM_KMEM_SIZE_MAX opt_vm.h 630VM_NRESERVLEVEL opt_vm.h 631VM_LEVEL_0_ORDER opt_vm.h 632NO_SWAPPING opt_vm.h 633MALLOC_MAKE_FAILURES opt_vm.h 634MALLOC_PROFILE opt_vm.h 635MALLOC_DEBUG_MAXZONES opt_vm.h 636 637# The MemGuard replacement allocator used for tamper-after-free detection 638DEBUG_MEMGUARD opt_vm.h 639 640# The RedZone malloc(9) protection 641DEBUG_REDZONE opt_vm.h 642 643# Standard SMP options 644EARLY_AP_STARTUP opt_global.h 645SMP opt_global.h 646NUMA opt_global.h 647 648# Size of the kernel message buffer 649MSGBUF_SIZE opt_msgbuf.h 650 651# NFS options 652NFS_MINATTRTIMO opt_nfs.h 653NFS_MAXATTRTIMO opt_nfs.h 654NFS_MINDIRATTRTIMO opt_nfs.h 655NFS_MAXDIRATTRTIMO opt_nfs.h 656NFS_DEBUG opt_nfs.h 657 658# TMPFS options 659TMPFS_PAGES_MINRESERVED opt_tmpfs.h 660 661# Options for uart(4) 662UART_PPS_ON_CTS opt_uart.h 663UART_POLL_FREQ opt_uart.h 664UART_DEV_TOLERANCE_PCT opt_uart.h 665 666# options for bus/device framework 667BUS_DEBUG opt_bus.h 668 669# options for USB support 670USB_DEBUG opt_usb.h 671USB_HOST_ALIGN opt_usb.h 672USB_REQ_DEBUG opt_usb.h 673USB_TEMPLATE opt_usb.h 674USB_VERBOSE opt_usb.h 675USB_DMA_SINGLE_ALLOC opt_usb.h 676USB_EHCI_BIG_ENDIAN_DESC opt_usb.h 677U3G_DEBUG opt_u3g.h 678UKBD_DFLT_KEYMAP opt_ukbd.h 679UPLCOM_INTR_INTERVAL opt_uplcom.h 680UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h 681UVSCOM_INTR_INTERVAL opt_uvscom.h 682 683# options for the Realtek rtwn driver 684RTWN_DEBUG opt_rtwn.h 685RTWN_WITHOUT_UCODE opt_rtwn.h 686 687# Embedded system options 688INIT_PATH 689 690ROOTDEVNAME 691 692FDC_DEBUG opt_fdc.h 693PCFCLOCK_VERBOSE opt_pcfclock.h 694PCFCLOCK_MAX_RETRIES opt_pcfclock.h 695 696KTR opt_global.h 697KTR_ALQ opt_ktr.h 698KTR_MASK opt_ktr.h 699KTR_CPUMASK opt_ktr.h 700KTR_COMPILE opt_global.h 701KTR_BOOT_ENTRIES opt_global.h 702KTR_ENTRIES opt_global.h 703KTR_VERBOSE opt_ktr.h 704WITNESS opt_global.h 705WITNESS_KDB opt_witness.h 706WITNESS_NO_VNODE opt_witness.h 707WITNESS_SKIPSPIN opt_witness.h 708WITNESS_COUNT opt_witness.h 709OPENSOLARIS_WITNESS opt_global.h 710 711EPOCH_TRACE opt_global.h 712 713# options for ACPI support 714ACPI_DEBUG opt_acpi.h 715ACPI_MAX_TASKS opt_acpi.h 716ACPI_MAX_THREADS opt_acpi.h 717DEV_ACPI opt_acpi.h 718ACPI_EARLY_EPYC_WAR opt_acpi.h 719 720# options for IOMMU support 721IOMMU opt_iommu.h 722 723# ISA support 724DEV_ISA opt_isa.h 725ISAPNP opt_dontuse.h 726 727# various 'device presence' options. 728DEV_BPF opt_bpf.h 729DEV_CARP opt_carp.h 730DEV_NETMAP opt_global.h 731DEV_PCI opt_pci.h 732DEV_PF opt_pf.h 733DEV_PFLOG opt_pf.h 734DEV_PFSYNC opt_pf.h 735DEV_SPLASH opt_splash.h 736DEV_VLAN opt_vlan.h 737 738# bce driver 739BCE_DEBUG opt_bce.h 740BCE_NVRAM_WRITE_SUPPORT opt_bce.h 741 742SOCKBUF_DEBUG opt_global.h 743 744 745# options for hifn driver 746HIFN_DEBUG opt_hifn.h 747HIFN_RNDTEST opt_hifn.h 748 749# options for safenet driver 750SAFE_DEBUG opt_safe.h 751SAFE_NO_RNG opt_safe.h 752SAFE_RNDTEST opt_safe.h 753 754# syscons/vt options 755MAXCONS opt_syscons.h 756SC_ALT_MOUSE_IMAGE opt_syscons.h 757SC_CUT_SPACES2TABS opt_syscons.h 758SC_CUT_SEPCHARS opt_syscons.h 759SC_DEBUG_LEVEL opt_syscons.h 760SC_DFLT_FONT opt_syscons.h 761SC_DFLT_TERM opt_syscons.h 762SC_DISABLE_KDBKEY opt_syscons.h 763SC_DISABLE_REBOOT opt_syscons.h 764SC_HISTORY_SIZE opt_syscons.h 765SC_KERNEL_CONS_ATTR opt_syscons.h 766SC_KERNEL_CONS_ATTRS opt_syscons.h 767SC_KERNEL_CONS_REV_ATTR opt_syscons.h 768SC_MOUSE_CHAR opt_syscons.h 769SC_NO_CUTPASTE opt_syscons.h 770SC_NO_FONT_LOADING opt_syscons.h 771SC_NO_HISTORY opt_syscons.h 772SC_NO_MODE_CHANGE opt_syscons.h 773SC_NO_SUSPEND_VTYSWITCH opt_syscons.h 774SC_NO_SYSMOUSE opt_syscons.h 775SC_NO_TERM_DUMB opt_syscons.h 776SC_NO_TERM_SC opt_syscons.h 777SC_NO_TERM_TEKEN opt_syscons.h 778SC_NORM_ATTR opt_syscons.h 779SC_NORM_REV_ATTR opt_syscons.h 780SC_PIXEL_MODE opt_syscons.h 781SC_RENDER_DEBUG opt_syscons.h 782SC_TWOBUTTON_MOUSE opt_syscons.h 783VT_ALT_TO_ESC_HACK opt_syscons.h 784VT_FB_MAX_WIDTH opt_syscons.h 785VT_FB_MAX_HEIGHT opt_syscons.h 786VT_MAXWINDOWS opt_syscons.h 787VT_TWOBUTTON_MOUSE opt_syscons.h 788DEV_SC opt_syscons.h 789DEV_VT opt_syscons.h 790 791# teken terminal emulator options 792TEKEN_CONS25 opt_teken.h 793TEKEN_UTF8 opt_teken.h 794TERMINAL_KERN_ATTR opt_teken.h 795TERMINAL_NORM_ATTR opt_teken.h 796 797# options for printf 798PRINTF_BUFR_SIZE opt_printf.h 799BOOT_TAG opt_printf.h 800BOOT_TAG_SZ opt_printf.h 801 802# kbd options 803KBD_DISABLE_KEYMAP_LOAD opt_kbd.h 804KBD_INSTALL_CDEV opt_kbd.h 805KBD_MAXRETRY opt_kbd.h 806KBD_MAXWAIT opt_kbd.h 807KBD_RESETDELAY opt_kbd.h 808KBD_DELAY1 opt_kbd.h 809KBD_DELAY2 opt_kbd.h 810KBDIO_DEBUG opt_kbd.h 811KBDMUX_DFLT_KEYMAP opt_kbdmux.h 812 813# options for the Atheros driver 814ATH_DEBUG opt_ath.h 815ATH_TXBUF opt_ath.h 816ATH_RXBUF opt_ath.h 817ATH_DIAGAPI opt_ath.h 818ATH_TX99_DIAG opt_ath.h 819ATH_ENABLE_DFS opt_ath.h 820ATH_EEPROM_FIRMWARE opt_ath.h 821ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 822ATH_DEBUG_ALQ opt_ath.h 823ATH_KTR_INTR_DEBUG opt_ath.h 824 825AH_DEBUG opt_ah.h 826AH_ASSERT opt_ah.h 827AH_DEBUG_ALQ opt_ah.h 828AH_REGOPS_FUNC opt_ah.h 829AH_WRITE_REGDOMAIN opt_ah.h 830AH_DEBUG_COUNTRY opt_ah.h 831AH_WRITE_EEPROM opt_ah.h 832AH_PRIVATE_DIAG opt_ah.h 833AH_NEED_DESC_SWAP opt_ah.h 834AH_USE_INIPDGAIN opt_ah.h 835AH_MAXCHAN opt_ah.h 836AH_RXCFG_SDMAMW_4BYTES opt_ah.h 837AH_INTERRUPT_DEBUGGING opt_ah.h 838# AR5416 and later interrupt mitigation 839# XXX do not use this for AR9130 840AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 841 842# options for the Altera mSGDMA driver (altera_msgdma) 843ALTERA_MSGDMA_DESC_STD opt_altera_msgdma.h 844ALTERA_MSGDMA_DESC_EXT opt_altera_msgdma.h 845ALTERA_MSGDMA_DESC_PF_STD opt_altera_msgdma.h 846ALTERA_MSGDMA_DESC_PF_EXT opt_altera_msgdma.h 847 848# options for the Broadcom BCM43xx driver (bwi) 849BWI_DEBUG opt_bwi.h 850BWI_DEBUG_VERBOSE opt_bwi.h 851 852# options for the Brodacom BCM43xx driver (bwn) 853BWN_DEBUG opt_bwn.h 854BWN_GPL_PHY opt_bwn.h 855BWN_USE_SIBA opt_bwn.h 856 857# Options for the SIBA driver 858SIBA_DEBUG opt_siba.h 859 860# options for the Marvell 8335 wireless driver 861MALO_DEBUG opt_malo.h 862MALO_TXBUF opt_malo.h 863MALO_RXBUF opt_malo.h 864 865# options for the Marvell wireless driver 866MWL_DEBUG opt_mwl.h 867MWL_TXBUF opt_mwl.h 868MWL_RXBUF opt_mwl.h 869MWL_DIAGAPI opt_mwl.h 870MWL_AGGR_SIZE opt_mwl.h 871MWL_TX_NODROP opt_mwl.h 872 873# Options for the Marvell NETA driver 874MVNETA_MULTIQUEUE opt_mvneta.h 875MVNETA_KTR opt_mvneta.h 876 877# Options for the Intel 802.11ac wireless driver 878IWM_DEBUG opt_iwm.h 879 880# Options for the Intel 802.11n wireless driver 881IWN_DEBUG opt_iwn.h 882 883# Options for the Intel 3945ABG wireless driver 884WPI_DEBUG opt_wpi.h 885 886# dcons options 887DCONS_BUF_SIZE opt_dcons.h 888DCONS_POLL_HZ opt_dcons.h 889DCONS_FORCE_CONSOLE opt_dcons.h 890DCONS_FORCE_GDB opt_dcons.h 891 892# HWPMC options 893HWPMC_DEBUG opt_global.h 894HWPMC_HOOKS 895 896# 802.11 support layer 897IEEE80211_DEBUG opt_wlan.h 898IEEE80211_DEBUG_REFCNT opt_wlan.h 899IEEE80211_SUPPORT_MESH opt_wlan.h 900IEEE80211_SUPPORT_SUPERG opt_wlan.h 901IEEE80211_SUPPORT_TDMA opt_wlan.h 902IEEE80211_ALQ opt_wlan.h 903IEEE80211_DFS_DEBUG opt_wlan.h 904 905# 802.11 TDMA support 906TDMA_SLOTLEN_DEFAULT opt_tdma.h 907TDMA_SLOTCNT_DEFAULT opt_tdma.h 908TDMA_BINTVAL_DEFAULT opt_tdma.h 909TDMA_TXRATE_11B_DEFAULT opt_tdma.h 910TDMA_TXRATE_11G_DEFAULT opt_tdma.h 911TDMA_TXRATE_11A_DEFAULT opt_tdma.h 912TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 913TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 914TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 915TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 916TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 917 918# VideoMode 919PICKMODE_DEBUG opt_videomode.h 920 921# Network stack virtualization options 922VIMAGE opt_global.h 923VNET_DEBUG opt_global.h 924 925# Common Flash Interface (CFI) options 926CFI_SUPPORT_STRATAFLASH opt_cfi.h 927CFI_ARMEDANDDANGEROUS opt_cfi.h 928CFI_HARDWAREBYTESWAP opt_cfi.h 929 930# Sound options 931SND_DEBUG opt_snd.h 932SND_DIAGNOSTIC opt_snd.h 933SND_FEEDER_MULTIFORMAT opt_snd.h 934SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 935SND_FEEDER_RATE_HP opt_snd.h 936SND_PCM_64 opt_snd.h 937SND_OLDSTEREO opt_snd.h 938 939X86BIOS 940 941# Flattened device tree options 942FDT opt_platform.h 943FDT_DTB_STATIC opt_platform.h 944 945# OFED Infiniband stack 946OFED opt_ofed.h 947OFED_DEBUG_INIT opt_ofed.h 948SDP opt_ofed.h 949SDP_DEBUG opt_ofed.h 950IPOIB opt_ofed.h 951IPOIB_DEBUG opt_ofed.h 952IPOIB_CM opt_ofed.h 953 954# Resource Accounting 955RACCT opt_global.h 956RACCT_DEFAULT_TO_DISABLED opt_global.h 957 958# Resource Limits 959RCTL opt_global.h 960 961# Random number generator(s) 962# Alternative RNG algorithm. 963RANDOM_FENESTRASX opt_global.h 964# With this, no entropy processor is loaded, but the entropy 965# harvesting infrastructure is present. This means an entropy 966# processor may be loaded as a module. 967RANDOM_LOADABLE opt_global.h 968# This turns on high-rate and potentially expensive harvesting in 969# the uma slab allocator. 970RANDOM_ENABLE_UMA opt_global.h 971RANDOM_ENABLE_ETHER opt_global.h 972 973# This options turns TPM into entropy source. 974TPM_HARVEST opt_tpm.h 975 976# BHND(4) driver 977BHND_LOGLEVEL opt_global.h 978 979# GPIO and child devices 980GPIO_SPI_DEBUG opt_gpio.h 981 982# SPI devices 983SPIGEN_LEGACY_CDEVNAME opt_spi.h 984 985# etherswitch(4) driver 986RTL8366_SOFT_RESET opt_etherswitch.h 987 988# evdev protocol support 989EVDEV_SUPPORT opt_evdev.h 990EVDEV_DEBUG opt_evdev.h 991UINPUT_DEBUG opt_evdev.h 992 993# Hyper-V network driver 994HN_DEBUG opt_hn.h 995 996# CAM-based MMC stack 997MMCCAM 998# Encrypted kernel crash dumps 999EKCD opt_ekcd.h 1000 1001# NVME options 1002NVME_USE_NVD opt_nvme.h 1003 1004# amdsbwd options 1005AMDSBWD_DEBUG opt_amdsbwd.h 1006 1007# gcov support 1008GCOV opt_global.h 1009LINDEBUGFS 1010 1011# options for HID support 1012HID_DEBUG opt_hid.h 1013IICHID_DEBUG opt_hid.h 1014IICHID_SAMPLING opt_hid.h 1015HKBD_DFLT_KEYMAP opt_hkbd.h 1016HIDRAW_MAKE_UHID_ALIAS opt_hid.h 1017 1018# kenv options 1019# The early kernel environment (loader environment, config(8)-provided static) 1020# is typically cleared after the dynamic environment comes up to ensure that 1021# we're not inadvertently holding on to 'secret' values in these stale envs. 1022# This option is insecure except in controlled environments where the static 1023# environment's contents are known to be safe. 1024PRESERVE_EARLY_KENV opt_global.h 1025