1* Clock and reset bindings for CSR atlas7
2
3Required properties:
4- compatible: Should be "sirf,atlas7-car"
5- reg: Address and length of the register set
6- #clock-cells: Should be <1>
7- #reset-cells: Should be <1>
8
9The clock consumer should specify the desired clock by having the clock
10ID in its "clocks" phandle cell.
11The ID list atlas7_clks defined in drivers/clk/sirf/clk-atlas7.c
12
13The reset consumer should specify the desired reset by having the reset
14ID in its "reset" phandle cell.
15The ID list atlas7_reset_unit defined in drivers/clk/sirf/clk-atlas7.c
16
17Examples: Clock and reset controller node:
18
19car: clock-controller@18620000 {
20	compatible = "sirf,atlas7-car";
21	reg = <0x18620000 0x1000>;
22	#clock-cells = <1>;
23	#reset-cells = <1>;
24};
25
26Examples: Consumers using clock or reset:
27
28timer@10dc0000 {
29	compatible = "sirf,macro-tick";
30	reg = <0x10dc0000 0x1000>;
31	clocks = <&car 54>;
32	interrupts = <0 0 0>,
33		   <0 1 0>,
34		   <0 2 0>,
35		   <0 49 0>,
36		   <0 50 0>,
37		   <0 51 0>;
38};
39
40uart1: uart@18020000 {
41	cell-index = <1>;
42	compatible = "sirf,macro-uart";
43	reg = <0x18020000 0x1000>;
44	clocks = <&clks 95>;
45	interrupts = <0 18 0>;
46	fifosize = <32>;
47};
48
49vpp@13110000 {
50	compatible = "sirf,prima2-vpp";
51	reg = <0x13110000 0x10000>;
52	interrupts = <0 31 0>;
53	clocks = <&car 85>;
54	resets = <&car 29>;
55};
56