1Bindings for Texas Instruments CDCE706 programmable 3-PLL clock
2synthesizer/multiplier/divider.
3
4Reference: https://www.ti.com/lit/ds/symlink/cdce706.pdf
5
6I2C device node required properties:
7- compatible: shall be "ti,cdce706".
8- reg: i2c device address, shall be in range [0x68...0x6b].
9- #clock-cells: from common clock binding; shall be set to 1.
10- clocks: from common clock binding; list of parent clock
11  handles, shall be reference clock(s) connected to CLK_IN0
12  and CLK_IN1 pins.
13- clock-names: shall be clk_in0 and/or clk_in1. Use clk_in0
14  in case of crystal oscillator or differential signal input
15  configuration. Use clk_in0 and clk_in1 in case of independent
16  single-ended LVCMOS inputs configuration.
17
18Example:
19
20	clocks {
21		clk54: clk54 {
22			#clock-cells = <0>;
23			compatible = "fixed-clock";
24			clock-frequency = <54000000>;
25		};
26	};
27	...
28	i2c0: i2c-master@d090000 {
29		...
30		cdce706: clock-synth@69 {
31			compatible = "ti,cdce706";
32			#clock-cells = <1>;
33			reg = <0x69>;
34			clocks = <&clk54>;
35			clock-names = "clk_in0";
36		};
37	};
38	...
39	simple-audio-card,codec {
40		...
41		clocks = <&cdce706 4>;
42	};
43