1Binding for Texas Instruments DPLL clock.
2
3Binding status: Unstable - ABI compatibility may be broken in the future
4
5This binding uses the common clock binding[1].  It assumes a
6register-mapped DPLL with usually two selectable input clocks
7(reference clock and bypass clock), with digital phase locked
8loop logic for multiplying the input clock to a desired output
9clock. This clock also typically supports different operation
10modes (locked, low power stop etc.) This binding has several
11sub-types, which effectively result in slightly different setup
12for the actual DPLL clock.
13
14[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
15
16Required properties:
17- compatible : shall be one of:
18		"ti,omap3-dpll-clock",
19		"ti,omap3-dpll-core-clock",
20		"ti,omap3-dpll-per-clock",
21		"ti,omap3-dpll-per-j-type-clock",
22		"ti,omap4-dpll-clock",
23		"ti,omap4-dpll-x2-clock",
24		"ti,omap4-dpll-core-clock",
25		"ti,omap4-dpll-m4xen-clock",
26		"ti,omap4-dpll-j-type-clock",
27		"ti,omap5-mpu-dpll-clock",
28		"ti,am3-dpll-no-gate-clock",
29		"ti,am3-dpll-j-type-clock",
30		"ti,am3-dpll-no-gate-j-type-clock",
31		"ti,am3-dpll-clock",
32		"ti,am3-dpll-core-clock",
33		"ti,am3-dpll-x2-clock",
34		"ti,omap2-dpll-core-clock",
35
36- #clock-cells : from common clock binding; shall be set to 0.
37- clocks : link phandles of parent clocks, first entry lists reference clock
38  and second entry bypass clock
39- reg : offsets for the register set for controlling the DPLL.
40  Registers are listed in following order:
41	"control" - contains the control register base address
42	"idlest" - contains the idle status register base address
43	"mult-div1" - contains the multiplier / divider register base address
44	"autoidle" - contains the autoidle register base address (optional)
45  ti,am3-* dpll types do not have autoidle register
46  ti,omap2-* dpll type does not support idlest / autoidle registers
47
48Optional properties:
49- DPLL mode setting - defining any one or more of the following overrides
50  default setting.
51	- ti,low-power-stop : DPLL supports low power stop mode, gating output
52	- ti,low-power-bypass : DPLL output matches rate of parent bypass clock
53	- ti,lock : DPLL locks in programmed rate
54
55Examples:
56	dpll_core_ck: dpll_core_ck@44e00490 {
57		#clock-cells = <0>;
58		compatible = "ti,omap4-dpll-core-clock";
59		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
60		reg = <0x490>, <0x45c>, <0x488>, <0x468>;
61	};
62
63	dpll2_ck: dpll2_ck@48004004 {
64		#clock-cells = <0>;
65		compatible = "ti,omap3-dpll-clock";
66		clocks = <&sys_ck>, <&dpll2_fck>;
67		ti,low-power-stop;
68		ti,low-power-bypass;
69		ti,lock;
70		reg = <0x4>, <0x24>, <0x34>, <0x40>;
71	};
72
73	dpll_core_ck: dpll_core_ck@44e00490 {
74		#clock-cells = <0>;
75		compatible = "ti,am3-dpll-core-clock";
76		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
77		reg = <0x90>, <0x5c>, <0x68>;
78	};
79
80	dpll_ck: dpll_ck {
81		#clock-cells = <0>;
82		compatible = "ti,omap2-dpll-core-clock";
83		clocks = <&sys_ck>, <&sys_ck>;
84		reg = <0x0500>, <0x0540>;
85	};
86