1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/display/mediatek/mediatek,rdma.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Mediatek Read Direct Memory Access
8
9maintainers:
10  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
11  - Philipp Zabel <p.zabel@pengutronix.de>
12
13description: |
14  Mediatek Read Direct Memory Access(RDMA) component used to read the
15  data into DMA. It provides real time data to the back-end panel
16  driver, such as DSI, DPI and DP_INTF.
17  It contains one line buffer to store the sufficient pixel data.
18  RDMA device node must be siblings to the central MMSYS_CONFIG node.
19  For a description of the MMSYS_CONFIG binding, see
20  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
21  for details.
22
23properties:
24  compatible:
25    oneOf:
26      - enum:
27          - mediatek,mt2701-disp-rdma
28          - mediatek,mt8173-disp-rdma
29          - mediatek,mt8183-disp-rdma
30          - mediatek,mt8195-disp-rdma
31      - items:
32          - enum:
33              - mediatek,mt8188-disp-rdma
34          - const: mediatek,mt8195-disp-rdma
35      - items:
36          - enum:
37              - mediatek,mt7623-disp-rdma
38              - mediatek,mt2712-disp-rdma
39          - const: mediatek,mt2701-disp-rdma
40      - items:
41          - enum:
42              - mediatek,mt6795-disp-rdma
43          - const: mediatek,mt8173-disp-rdma
44      - items:
45          - enum:
46              - mediatek,mt8186-disp-rdma
47              - mediatek,mt8192-disp-rdma
48          - const: mediatek,mt8183-disp-rdma
49
50  reg:
51    maxItems: 1
52
53  interrupts:
54    maxItems: 1
55
56  power-domains:
57    description: A phandle and PM domain specifier as defined by bindings of
58      the power controller specified by phandle. See
59      Documentation/devicetree/bindings/power/power-domain.yaml for details.
60
61  clocks:
62    items:
63      - description: RDMA Clock
64
65  iommus:
66    description:
67      This property should point to the respective IOMMU block with master port as argument,
68      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
69
70  mediatek,rdma-fifo-size:
71    description:
72      rdma fifo size may be different even in same SOC, add this property to the
73      corresponding rdma.
74      The value below is the Max value which defined in hardware data sheet
75      mediatek,rdma-fifo-size of mt8173-rdma0 is 8K
76      mediatek,rdma-fifo-size of mt8183-rdma0 is 5K
77      mediatek,rdma-fifo-size of mt8183-rdma1 is 2K
78    $ref: /schemas/types.yaml#/definitions/uint32
79    enum: [8192, 5120, 2048]
80
81  mediatek,gce-client-reg:
82    description: The register of client driver can be configured by gce with
83      4 arguments defined in this property, such as phandle of gce, subsys id,
84      register offset and size. Each GCE subsys id is mapping to a client
85      defined in the header include/dt-bindings/gce/<chip>-gce.h.
86    $ref: /schemas/types.yaml#/definitions/phandle-array
87    maxItems: 1
88
89required:
90  - compatible
91  - reg
92  - interrupts
93  - power-domains
94  - clocks
95  - iommus
96
97additionalProperties: false
98
99examples:
100  - |
101    #include <dt-bindings/interrupt-controller/arm-gic.h>
102    #include <dt-bindings/clock/mt8173-clk.h>
103    #include <dt-bindings/power/mt8173-power.h>
104    #include <dt-bindings/gce/mt8173-gce.h>
105    #include <dt-bindings/memory/mt8173-larb-port.h>
106
107    soc {
108        #address-cells = <2>;
109        #size-cells = <2>;
110
111        rdma0: rdma@1400e000 {
112            compatible = "mediatek,mt8173-disp-rdma";
113            reg = <0 0x1400e000 0 0x1000>;
114            interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
115            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
116            clocks = <&mmsys CLK_MM_DISP_RDMA0>;
117            iommus = <&iommu M4U_PORT_DISP_RDMA0>;
118            mediatek,rdma-fifo-size = <8192>;
119            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
120        };
121    };
122