1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Freescale enhanced Direct Memory Access(eDMA) Controller
8
9description: |
10  The eDMA channels have multiplex capability by programmable
11  memory-mapped registers. channels are split into two groups, called
12  DMAMUX0 and DMAMUX1, specific DMA request source can only be multiplexed
13  by any channel of certain group, DMAMUX0 or DMAMUX1, but not both.
14
15maintainers:
16  - Peng Fan <peng.fan@nxp.com>
17
18properties:
19  compatible:
20    oneOf:
21      - enum:
22          - fsl,vf610-edma
23          - fsl,imx7ulp-edma
24          - fsl,imx8qm-adma
25          - fsl,imx8qm-edma
26          - fsl,imx93-edma3
27          - fsl,imx93-edma4
28      - items:
29          - const: fsl,ls1028a-edma
30          - const: fsl,vf610-edma
31
32  reg:
33    minItems: 1
34    maxItems: 3
35
36  interrupts:
37    minItems: 1
38    maxItems: 64
39
40  interrupt-names:
41    minItems: 1
42    maxItems: 64
43
44  "#dma-cells":
45    enum:
46      - 2
47      - 3
48
49  dma-channels:
50    minItems: 1
51    maxItems: 64
52
53  clocks:
54    minItems: 1
55    maxItems: 2
56
57  clock-names:
58    minItems: 1
59    maxItems: 2
60
61  big-endian:
62    description: |
63      If present registers and hardware scatter/gather descriptors of the
64      eDMA are implemented in big endian mode, otherwise in little mode.
65    type: boolean
66
67required:
68  - "#dma-cells"
69  - compatible
70  - reg
71  - interrupts
72  - clocks
73  - dma-channels
74
75allOf:
76  - $ref: dma-controller.yaml#
77  - if:
78      properties:
79        compatible:
80          contains:
81            enum:
82              - fsl,imx8qm-adma
83              - fsl,imx8qm-edma
84              - fsl,imx93-edma3
85              - fsl,imx93-edma4
86    then:
87      properties:
88        "#dma-cells":
89          const: 3
90        # It is not necessary to write the interrupt name for each channel.
91        # instead, you can simply maintain the sequential IRQ numbers as
92        # defined for the DMA channels.
93        interrupt-names: false
94        clock-names:
95          items:
96            - const: dma
97        clocks:
98          maxItems: 1
99
100  - if:
101      properties:
102        compatible:
103          contains:
104            const: fsl,vf610-edma
105    then:
106      properties:
107        clocks:
108          minItems: 2
109        clock-names:
110          items:
111            - const: dmamux0
112            - const: dmamux1
113        interrupts:
114          minItems: 2
115          maxItems: 2
116        interrupt-names:
117          items:
118            - const: edma-tx
119            - const: edma-err
120        reg:
121          minItems: 2
122          maxItems: 3
123        "#dma-cells":
124          const: 2
125        dma-channels:
126          const: 32
127
128  - if:
129      properties:
130        compatible:
131          contains:
132            const: fsl,imx7ulp-edma
133    then:
134      properties:
135        clock:
136          minItems: 2
137        clock-names:
138          items:
139            - const: dma
140            - const: dmamux0
141        interrupts:
142          minItems: 2
143          maxItems: 17
144        reg:
145          minItems: 2
146          maxItems: 2
147        "#dma-cells":
148          const: 2
149        dma-channels:
150          const: 32
151
152unevaluatedProperties: false
153
154examples:
155  - |
156    #include <dt-bindings/interrupt-controller/arm-gic.h>
157    #include <dt-bindings/clock/vf610-clock.h>
158
159    edma0: dma-controller@40018000 {
160      #dma-cells = <2>;
161      compatible = "fsl,vf610-edma";
162      reg = <0x40018000 0x2000>,
163            <0x40024000 0x1000>,
164            <0x40025000 0x1000>;
165      interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
166                   <0 9 IRQ_TYPE_LEVEL_HIGH>;
167      interrupt-names = "edma-tx", "edma-err";
168      dma-channels = <32>;
169      clock-names = "dmamux0", "dmamux1";
170      clocks = <&clks VF610_CLK_DMAMUX0>, <&clks VF610_CLK_DMAMUX1>;
171    };
172
173  - |
174    #include <dt-bindings/interrupt-controller/arm-gic.h>
175    #include <dt-bindings/clock/imx7ulp-clock.h>
176
177    edma1: dma-controller@40080000 {
178      #dma-cells = <2>;
179      compatible = "fsl,imx7ulp-edma";
180      reg = <0x40080000 0x2000>,
181            <0x40210000 0x1000>;
182      dma-channels = <32>;
183      interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
184                   <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
185                   <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
186                   <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
187                   <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
188                   <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
189                   <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
190                   <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
191                   <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
192                   <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
193                   <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
194                   <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
195                   <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
196                   <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
197                   <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
198                   <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
199                   /* last is eDMA2-ERR interrupt */
200                   <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
201       clock-names = "dma", "dmamux0";
202       clocks = <&pcc2 IMX7ULP_CLK_DMA1>, <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
203    };
204
205  - |
206    #include <dt-bindings/interrupt-controller/arm-gic.h>
207    #include <dt-bindings/clock/imx93-clock.h>
208
209    dma-controller@44000000 {
210      compatible = "fsl,imx93-edma3";
211      reg = <0x44000000 0x200000>;
212      #dma-cells = <3>;
213      dma-channels = <31>;
214      interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
215                   <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
216                   <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
217                   <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
218                   <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
219                   <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
220                   <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
221                   <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
222                   <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
223                   <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
224                   <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
225                   <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
226                   <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
227                   <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
228                   <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
229                   <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
230                   <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
231                   <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
232                   <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
233                   <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
234                   <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
235                   <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
236                   <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
237                   <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
238                   <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
239                   <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
240                   <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
241                   <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
242                   <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
243                   <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
244                   <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
245        clocks = <&clk IMX93_CLK_EDMA1_GATE>;
246        clock-names = "dma";
247    };
248