1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/iio/accel/bosch,bma180.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial accelerometers
8
9maintainers:
10  - Jonathan Cameron <jic23@kernel.org>
11
12description: |
13  https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf
14  http://omapworld.com/BMA180_111_1002839.pdf
15  http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
16
17properties:
18  compatible:
19    enum:
20      - bosch,bma023
21      - bosch,bma150
22      - bosch,bma180
23      - bosch,bma250
24      - bosch,bma254
25      - bosch,smb380
26
27  reg:
28    maxItems: 1
29
30  vdd-supply: true
31
32  vddio-supply: true
33
34  interrupts:
35    minItems: 1
36    maxItems: 2
37    description: |
38      Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING.
39      For the bma250 the first interrupt listed must be the one
40      connected to the INT1 pin, the second (optional) interrupt
41      listed must be the one connected to the INT2 pin.
42
43required:
44  - compatible
45  - reg
46
47additionalProperties: false
48
49examples:
50  - |
51    #include <dt-bindings/interrupt-controller/irq.h>
52    i2c {
53        #address-cells = <1>;
54        #size-cells = <0>;
55        accel@40 {
56            compatible = "bosch,bma180";
57            reg = <0x40>;
58            interrupt-parent = <&gpio6>;
59            interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
60        };
61    };
62...
63