1# SPDX-License-Identifier: GPL-2.0-only
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/input/gpio-keys.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: GPIO attached keys
8
9maintainers:
10  - Rob Herring <robh@kernel.org>
11
12properties:
13  compatible:
14    enum:
15      - gpio-keys
16      - gpio-keys-polled
17
18  autorepeat: true
19
20  label:
21    description: Name of entire device
22
23  poll-interval: true
24
25patternProperties:
26  "^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$":
27    $ref: input.yaml#
28
29    properties:
30      gpios:
31        maxItems: 1
32
33      interrupts:
34        maxItems: 1
35
36      label:
37        description: Descriptive name of the key.
38
39      linux,code:
40        description: Key / Axis code to emit.
41
42      linux,input-type:
43        default: 1  # EV_KEY
44
45      linux,input-value:
46        description: |
47          If linux,input-type is EV_ABS or EV_REL then this
48          value is sent for events this button generates when pressed.
49          EV_ABS/EV_REL axis will generate an event with a value of 0
50          when all buttons with linux,input-type == type and
51          linux,code == axis are released. This value is interpreted
52          as a signed 32 bit value, e.g. to make a button generate a
53          value of -1 use:
54
55          linux,input-value = <0xffffffff>; /* -1 */
56
57        $ref: /schemas/types.yaml#/definitions/uint32
58
59      debounce-interval:
60        description:
61          Debouncing interval time in milliseconds. If not specified defaults to 5.
62        $ref: /schemas/types.yaml#/definitions/uint32
63
64        default: 5
65
66      wakeup-source:
67        description: Button can wake-up the system.
68
69      wakeup-event-action:
70        description: |
71          Specifies whether the key should wake the system when asserted, when
72          deasserted, or both. This property is only valid for keys that wake up the
73          system (e.g., when the "wakeup-source" property is also provided).
74
75          Supported values are defined in linux-event-codes.h:
76
77            EV_ACT_ANY        - both asserted and deasserted
78            EV_ACT_ASSERTED   - asserted
79            EV_ACT_DEASSERTED - deasserted
80        $ref: /schemas/types.yaml#/definitions/uint32
81        enum: [0, 1, 2]
82
83      linux,can-disable:
84        description:
85          Indicates that button is connected to dedicated (not shared) interrupt
86          which can be disabled to suppress events from the button.
87        type: boolean
88
89    required:
90      - linux,code
91
92    anyOf:
93      - required:
94          - interrupts
95      - required:
96          - interrupts-extended
97      - required:
98          - gpios
99
100    dependencies:
101      wakeup-event-action: [ wakeup-source ]
102      linux,input-value: [ gpios ]
103
104    unevaluatedProperties: false
105
106allOf:
107  - $ref: input.yaml#
108  - if:
109      properties:
110        compatible:
111          const: gpio-keys-polled
112    then:
113      required:
114        - poll-interval
115    else:
116      properties:
117        poll-interval: false
118
119additionalProperties: false
120
121examples:
122  - |
123    #include <dt-bindings/interrupt-controller/irq.h>
124
125    gpio-keys {
126        compatible = "gpio-keys";
127        autorepeat;
128
129        key-up {
130            label = "GPIO Key UP";
131            linux,code = <103>;
132            gpios = <&gpio1 0 1>;
133        };
134
135        key-down {
136            label = "GPIO Key DOWN";
137            linux,code = <108>;
138            interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
139        };
140    };
141
142...
143