1RDA Micro RDA8810PL Interrupt Controller
2
3The interrupt controller in RDA8810PL SoC is a custom interrupt controller
4which supports up to 32 interrupts.
5
6Required properties:
7
8- compatible: Should be "rda,8810pl-intc".
9- reg: Specifies base physical address of the registers set.
10- interrupt-controller: Identifies the node as an interrupt controller.
11- #interrupt-cells: Specifies the number of cells needed to encode an
12  interrupt source. The value shall be 2.
13
14The interrupt sources are as follows:
15
16ID	Name
17------------
180:	PULSE_DUMMY
191:	I2C
202:	NAND_NFSC
213:	SDMMC1
224:	SDMMC2
235:	SDMMC3
246:	SPI1
257:	SPI2
268:	SPI3
279:	UART1
2810:	UART2
2911:	UART3
3012:	GPIO1
3113:	GPIO2
3214:	GPIO3
3315:	KEYPAD
3416:	TIMER
3517:	TIMEROS
3618:	COMREG0
3719:	COMREG1
3820:	USB
3921:	DMC
4022:	DMA
4123:	CAMERA
4224:	GOUDA
4325:	GPU
4426:	VPU_JPG
4527:	VPU_HOST
4628:	VOC
4729:	AUIFC0
4830:	AUIFC1
4931:	L2CC
50
51Example:
52		apb@20800000 {
53			compatible = "simple-bus";
54			...
55			intc: interrupt-controller@0 {
56				compatible = "rda,8810pl-intc";
57				reg = <0x0 0x1000>;
58				interrupt-controller;
59				#interrupt-cells = <2>;
60			};
61		};
62