1Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
2
3Synopsys DesignWare provides interrupt controller IP for APB known as
4dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
5APB bus, e.g. Marvell Armada 1500. It can also be used as primary interrupt
6controller in some SoCs, e.g. Hisilicon SD5203.
7
8Required properties:
9- compatible: shall be "snps,dw-apb-ictl"
10- reg: physical base address of the controller and length of memory mapped
11  region starting with ENABLE_LOW register
12- interrupt-controller: identifies the node as an interrupt controller
13- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
14
15Additional required property when it's used as secondary interrupt controller:
16- interrupts: interrupt reference to primary interrupt controller
17
18The interrupt sources map to the corresponding bits in the interrupt
19registers, i.e.
20- 0 maps to bit 0 of low interrupts,
21- 1 maps to bit 1 of low interrupts,
22- 32 maps to bit 0 of high interrupts,
23- 33 maps to bit 1 of high interrupts,
24- (optional) fast interrupts start at 64.
25
26Example:
27	/* dw_apb_ictl is used as secondary interrupt controller */
28	aic: interrupt-controller@3000 {
29		compatible = "snps,dw-apb-ictl";
30		reg = <0x3000 0xc00>;
31		interrupt-controller;
32		#interrupt-cells = <1>;
33		interrupt-parent = <&gic>;
34		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
35	};
36
37	/* dw_apb_ictl is used as primary interrupt controller */
38	vic: interrupt-controller@10130000 {
39		compatible = "snps,dw-apb-ictl";
40		reg = <0x10130000 0x1000>;
41		interrupt-controller;
42		#interrupt-cells = <1>;
43	};
44