1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/media/i2c/ov5647.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Omnivision OV5647 raw image sensor
8
9maintainers:
10  - Dave Stevenson <dave.stevenson@raspberrypi.com>
11  - Jacopo Mondi <jacopo@jmondi.org>
12
13description: |-
14  The OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data
15  interfaces and CCI (I2C compatible) control bus.
16
17properties:
18  compatible:
19    const: ovti,ov5647
20
21  reg:
22    description: I2C device address.
23    maxItems: 1
24
25  clocks:
26    description: Reference to the xclk clock.
27    maxItems: 1
28
29  pwdn-gpios:
30    description: Reference to the GPIO connected to the pwdn pin. Active high.
31    maxItems: 1
32
33  port:
34    type: object
35    description: |-
36      Should contain one endpoint sub-node used to model connection to the
37      video receiver according to the specification defined in
38      Documentation/devicetree/bindings/media/video-interfaces.txt.
39
40    properties:
41      endpoint:
42        type: object
43
44        properties:
45          remote-endpoint:
46            description: |-
47              phandle to the video receiver input port.
48
49          clock-noncontinuous:
50            type: boolean
51            description: |-
52              Set to true to allow MIPI CSI-2 non-continuous clock operations.
53
54        additionalProperties: false
55
56    additionalProperties: false
57
58required:
59  - compatible
60  - reg
61  - clocks
62  - port
63
64additionalProperties: false
65
66examples:
67  - |
68    #include <dt-bindings/gpio/gpio.h>
69
70    i2c {
71        #address-cells = <1>;
72        #size-cells = <0>;
73
74        ov5647: camera@36 {
75            compatible = "ovti,ov5647";
76            reg = <0x36>;
77            clocks = <&camera_clk>;
78            pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
79
80            port {
81                camera_out: endpoint {
82                    remote-endpoint = <&csi1_ep1>;
83                };
84            };
85        };
86    };
87
88...
89