1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Samsung S5M8767 Power Management IC
8
9maintainers:
10  - Krzysztof Kozlowski <krzk@kernel.org>
11
12description: |
13  This is a part of device tree bindings for S2M and S5M family of Power
14  Management IC (PMIC).
15
16  The Samsung S5M8767 is a Power Management IC which includes voltage
17  and current regulators, RTC, clock outputs and other sub-blocks.
18
19properties:
20  compatible:
21    const: samsung,s5m8767-pmic
22
23  clocks:
24    $ref: ../clock/samsung,s2mps11.yaml
25    description:
26      Child node describing clock provider.
27
28  interrupts:
29    maxItems: 1
30
31  reg:
32    maxItems: 1
33
34  regulators:
35    $ref: ../regulator/samsung,s5m8767.yaml
36    description:
37      List of child nodes that specify the regulators.
38
39  s5m8767,pmic-buck2-dvs-voltage:
40    $ref: /schemas/types.yaml#/definitions/uint32-array
41    minItems: 8
42    maxItems: 8
43    description: |
44      A set of 8 voltage values in micro-volt (uV) units for buck2 when
45      changing voltage using gpio dvs.
46
47  s5m8767,pmic-buck3-dvs-voltage:
48    $ref: /schemas/types.yaml#/definitions/uint32-array
49    minItems: 8
50    maxItems: 8
51    description: |
52      A set of 8 voltage values in micro-volt (uV) units for buck3 when
53      changing voltage using gpio dvs.
54
55  s5m8767,pmic-buck4-dvs-voltage:
56    $ref: /schemas/types.yaml#/definitions/uint32-array
57    minItems: 8
58    maxItems: 8
59    description: |
60      A set of 8 voltage values in micro-volt (uV) units for buck4 when
61      changing voltage using gpio dvs.
62
63  s5m8767,pmic-buck-ds-gpios:
64    minItems: 3
65    maxItems: 3
66    description: |
67      GPIO specifiers for three host gpio's used for selecting GPIO DVS lines.
68      It is one-to-one mapped to dvs gpio lines.
69
70  s5m8767,pmic-buck2-uses-gpio-dvs:
71    type: boolean
72    description: buck2 can be controlled by gpio dvs.
73
74  s5m8767,pmic-buck3-uses-gpio-dvs:
75    type: boolean
76    description: buck3 can be controlled by gpio dvs.
77
78  s5m8767,pmic-buck4-uses-gpio-dvs:
79    type: boolean
80    description: buck4 can be controlled by gpio dvs.
81
82  s5m8767,pmic-buck-default-dvs-idx:
83    $ref: /schemas/types.yaml#/definitions/uint32-array
84    minimum: 0
85    maximum: 7
86    default: 0
87    description: |
88      Default voltage setting selected from the possible 8 options selectable
89      by the dvs gpios. The value of this property should be between 0 and 7.
90      If not specified or if out of range, the default value of this property
91      is set to 0.
92
93  s5m8767,pmic-buck-dvs-gpios:
94    minItems: 3
95    maxItems: 3
96    description: |
97      GPIO specifiers for three host gpio's used for dvs.
98
99  vinb1-supply:
100    description: Power supply for buck1
101  vinb2-supply:
102    description: Power supply for buck2
103  vinb3-supply:
104    description: Power supply for buck3
105  vinb4-supply:
106    description: Power supply for buck4
107  vinb5-supply:
108    description: Power supply for buck5
109  vinb6-supply:
110    description: Power supply for buck6
111  vinb7-supply:
112    description: Power supply for buck7
113  vinb8-supply:
114    description: Power supply for buck8
115  vinb9-supply:
116    description: Power supply for buck9
117
118  vinl1-supply:
119    description: Power supply for LDO3, LDO10, LDO26, LDO27
120  vinl2-supply:
121    description: Power supply for LDO13, LDO16, LDO25, LDO28
122  vinl3-supply:
123    description: Power supply for LDO11, LDO14
124  vinl4-supply:
125    description: Power supply for LDO4, LDO9
126  vinl5-supply:
127    description: Power supply for LDO12, LDO17, LDO19, LDO23
128  vinl6-supply:
129    description: Power supply for LDO18, LDO20, LDO21, LDO24
130  vinl7-supply:
131    description: Power supply for LDO5, LDO22
132  vinl8-supply:
133    description: Power supply for LDO1, LDO6, LDO7, LDO8, LDO15
134  vinl9-supply:
135    description: Power supply for LDO2
136
137  wakeup-source: true
138
139required:
140  - compatible
141  - reg
142  - regulators
143  - s5m8767,pmic-buck-ds-gpios
144
145dependencies:
146  s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
147  s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
148  s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
149  s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ]
150  s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ]
151  s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ]
152
153additionalProperties: false
154
155allOf:
156  - not:
157      required:
158        - s5m8767,pmic-buck2-uses-gpio-dvs
159        - s5m8767,pmic-buck3-uses-gpio-dvs
160  - not:
161      required:
162        - s5m8767,pmic-buck2-uses-gpio-dvs
163        - s5m8767,pmic-buck4-uses-gpio-dvs
164  - not:
165      required:
166        - s5m8767,pmic-buck3-uses-gpio-dvs
167        - s5m8767,pmic-buck4-uses-gpio-dvs
168
169examples:
170  - |
171    #include <dt-bindings/gpio/gpio.h>
172    #include <dt-bindings/interrupt-controller/irq.h>
173
174    i2c {
175        #address-cells = <1>;
176        #size-cells = <0>;
177
178        pmic@66 {
179            compatible = "samsung,s5m8767-pmic";
180            reg = <0x66>;
181
182            interrupt-parent = <&gpx3>;
183            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
184            pinctrl-names = "default";
185            pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
186            wakeup-source;
187
188            s5m8767,pmic-buck-default-dvs-idx = <3>;
189            s5m8767,pmic-buck2-uses-gpio-dvs;
190
191            s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>,
192                                          <&gpd1 1 GPIO_ACTIVE_LOW>,
193                                          <&gpd1 2 GPIO_ACTIVE_LOW>;
194
195            s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
196                                         <&gpx2 4 GPIO_ACTIVE_LOW>,
197                                         <&gpx2 5 GPIO_ACTIVE_LOW>;
198
199            s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
200                                             <1250000>, <1200000>,
201                                             <1150000>, <1100000>,
202                                             <1000000>, <950000>;
203
204            s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
205                                             <1100000>, <1100000>,
206                                             <1000000>, <1000000>,
207                                             <1000000>, <1000000>;
208
209            s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
210                                             <1200000>, <1200000>,
211                                             <1200000>, <1200000>,
212                                             <1200000>, <1200000>;
213
214            clocks {
215                compatible = "samsung,s5m8767-clk";
216                #clock-cells = <1>;
217                clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
218            };
219
220            regulators {
221                LDO1 {
222                    regulator-name = "VDD_ALIVE";
223                    regulator-min-microvolt = <1100000>;
224                    regulator-max-microvolt = <1100000>;
225                    regulator-always-on;
226                    regulator-boot-on;
227                    op_mode = <1>; /* Normal Mode */
228                };
229
230                // ...
231
232                BUCK1 {
233                    regulator-name = "VDD_MIF";
234                    regulator-min-microvolt = <950000>;
235                    regulator-max-microvolt = <1100000>;
236                    regulator-always-on;
237                    regulator-boot-on;
238                    op_mode = <1>; /* Normal Mode */
239                };
240
241                BUCK2 {
242                    regulator-name = "VDD_ARM";
243                    regulator-min-microvolt = <900000>;
244                    regulator-max-microvolt = <1350000>;
245                    regulator-always-on;
246                    regulator-boot-on;
247                    op_mode = <1>; /* Normal Mode */
248                };
249
250                // ...
251            };
252        };
253    };
254
255  - |
256    #include <dt-bindings/gpio/gpio.h>
257    #include <dt-bindings/interrupt-controller/irq.h>
258
259    i2c {
260        #address-cells = <1>;
261        #size-cells = <0>;
262
263        pmic@66 {
264            compatible = "samsung,s5m8767-pmic";
265            reg = <0x66>;
266
267            interrupt-parent = <&gpx3>;
268            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
269            pinctrl-names = "default";
270            pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
271            wakeup-source;
272
273            s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
274                                         <&gpx2 4 GPIO_ACTIVE_LOW>,
275                                         <&gpx2 5 GPIO_ACTIVE_LOW>;
276
277            clocks {
278                compatible = "samsung,s5m8767-clk";
279                #clock-cells = <1>;
280                clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
281            };
282
283            regulators {
284                LDO1 {
285                    regulator-name = "VDD_ALIVE";
286                    regulator-min-microvolt = <1100000>;
287                    regulator-max-microvolt = <1100000>;
288                    regulator-always-on;
289                    regulator-boot-on;
290                    op_mode = <1>; /* Normal Mode */
291                };
292
293                // ...
294            };
295        };
296    };
297