1* Amlogic Meson6, Meson8 and Meson8b SDIO/MMC controller
2
3The highspeed MMC host controller on Amlogic SoCs provides an interface
4for MMC, SD, SDIO and SDHC types of memory cards.
5
6Supported maximum speeds are the ones of the eMMC standard 4.41 as well
7as the speed of SD standard 2.0.
8
9The hardware provides an internal "mux" which allows up to three slots
10to be controlled. Only one slot can be accessed at a time.
11
12Required properties:
13 - compatible : must be one of
14	- "amlogic,meson8-sdio"
15	- "amlogic,meson8b-sdio"
16	along with the generic "amlogic,meson-mx-sdio"
17 - reg : mmc controller base registers
18 - interrupts : mmc controller interrupt
19 - #address-cells : must be 1
20 - size-cells : must be 0
21 - clocks : phandle to clock providers
22 - clock-names : must contain "core" and "clkin"
23
24Required child nodes:
25A node for each slot provided by the MMC controller is required.
26NOTE: due to a driver limitation currently only one slot (= child node)
27      is supported!
28
29Required properties on each child node (= slot):
30 - compatible : must be "mmc-slot" (see mmc.txt within this directory)
31 - reg : the slot (or "port") ID
32
33Optional properties on each child node (= slot):
34 - bus-width : must be 1 or 4 (8-bit bus is not supported)
35 - for cd and all other additional generic mmc parameters
36   please refer to mmc.txt within this directory
37
38Examples:
39	mmc@c1108c20 {
40		compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
41		reg = <0xc1108c20 0x20>;
42		interrupts = <0 28 1>;
43		#address-cells = <1>;
44		#size-cells = <0>;
45		clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
46		clock-names = "core", "clkin";
47
48		slot@1 {
49			compatible = "mmc-slot";
50			reg = <1>;
51
52			bus-width = <4>;
53		};
54	};
55