1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/cirrus,madera.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Cirrus Logic Madera class audio CODECs pinctrl driver
8
9maintainers:
10  - patches@opensource.cirrus.com
11
12description: |
13  The Cirrus Logic Madera codecs provide a number of GPIO functions for
14  interfacing to external hardware and to provide logic outputs to other devices.
15  Certain groups of GPIO pins also have an alternate function, normally as an
16  audio interface.
17
18  The set of available GPIOs, functions and alternate function groups differs
19  between CODECs so refer to the datasheet for the CODEC for further information
20  on what is supported on that device.
21
22  The properties for this driver exist within the parent MFD driver node.
23
24  See also the core bindings for the parent MFD driver:
25
26    Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
27
28  And the generic pinmix bindings:
29
30    Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
31
32properties:
33  pinctrl-0:
34    description:
35      A phandle to the node containing the subnodes containing default
36      configurations.
37
38  pinctrl-names:
39    description:
40      A pinctrl state named "default" must be defined.
41    const: default
42
43  pin-settings:
44    description:
45      One subnode is required to contain the default settings. It
46      contains an arbitrary number of configuration subnodes, one for
47      each group or pin configuration you want to apply as a default.
48    type: object
49    patternProperties:
50      '-pins$':
51        type: object
52        allOf:
53          - $ref: "pincfg-node.yaml#"
54          - $ref: "pinmux-node.yaml#"
55        properties:
56          groups:
57            description:
58              Name of one pin group to configure.
59            enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1,
60                    pdmspk2, dmic4, dmic5, dmic6, gpio1, gpio2, gpio3,
61                    gpio4, gpio5, gpio6, gpio7, gpio7, gpio8, gpio9,
62                    gpio10, gpio11, gpio12, gpio13, gpio14, gpio15,
63                    gpio16, gpio17, gpio17, gpio18, gpio19, gpio20,
64                    gpio21, gpio22, gpio23, gpio24, gpio25, gpio26,
65                    gpio27, gpio27, gpio28, gpio29, gpio30, gpio31,
66                    gpio32, gpio33, gpio34, gpio35, gpio36, gpio37,
67                    gpio37, gpio38, gpio39 ]
68
69          function:
70            description:
71              Name of function to assign to this group.
72            enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3,
73                    pdmspk1, pdmspk2, dmic3, dmic4, dmic5,
74                    dmic6, io, dsp-gpio, irq1, irq2, fll1-clk,
75                    fll1-lock, fll2-clk, fll2-lock, fll3-clk,
76                    fll3-lock, fllao-clk, fllao-lock, opclk,
77                    opclk-async, pwm1, pwm2, spdif, asrc1-in1-lock,
78                    asrc1-in2-lock, asrc2-in1-lock, asrc2-in2-lock,
79                    spkl-short-circuit, spkr-short-circuit,
80                    spk-shutdown, spk-overheat-shutdown,
81                    spk-overheat-warn, timer1-sts, timer2-sts,
82                    timer3-sts, timer4-sts, timer5-sts, timer6-sts,
83                    timer7-sts, timer8-sts, log1-fifo-ne,
84                    log2-fifo-ne, log3-fifo-ne, log4-fifo-ne,
85                    log5-fifo-ne, log6-fifo-ne, log7-fifo-ne,
86                    log8-fifo-ne ]
87
88          bias-disable: true
89
90          bias-bus-hold: true
91
92          bias-pull-up: true
93
94          bias-pull-down: true
95
96          drive-push-pull: true
97
98          drive-open-drain: true
99
100          drive-strength:
101            enum: [ 4, 8 ]
102
103          input-schmitt-enable: true
104
105          input-schmitt-disable: true
106
107          input-debounce: true
108
109          output-low: true
110
111          output-high: true
112
113        additionalProperties: false
114
115        required:
116          - groups
117
118    additionalProperties: false
119
120required:
121  - pinctrl-0
122  - pinctrl-names
123
124additionalProperties: true
125