1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8192.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Mediatek MT8192 Pin Controller
8
9maintainers:
10  - Sean Wang <sean.wang@mediatek.com>
11
12description: |
13  The Mediatek's Pin controller is used to control SoC pins.
14
15properties:
16  compatible:
17    const: mediatek,mt8192-pinctrl
18
19  gpio-controller: true
20
21  '#gpio-cells':
22    description: |
23      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
24      the amount of cells must be specified as 2. See the below
25      mentioned gpio binding representation for description of particular cells.
26    const: 2
27
28  gpio-ranges:
29    description: gpio valid number range.
30    maxItems: 1
31
32  gpio-line-names: true
33
34  reg:
35    description: |
36      Physical address base for gpio base registers. There are 11 GPIO
37      physical address base in mt8192.
38    maxItems: 11
39
40  reg-names:
41    description: |
42      Gpio base register names.
43    maxItems: 11
44
45  interrupt-controller: true
46
47  '#interrupt-cells':
48    const: 2
49
50  interrupts:
51    description: The interrupt outputs to sysirq.
52    maxItems: 1
53
54#PIN CONFIGURATION NODES
55patternProperties:
56  '-pins$':
57    type: object
58    additionalProperties: false
59    patternProperties:
60      '^pins':
61        type: object
62        description: |
63          A pinctrl node should contain at least one subnodes representing the
64          pinctrl groups available on the machine. Each subnode will list the
65          pins it needs, and how they should be configured, with regard to muxer
66          configuration, pullups, drive strength, input enable/disable and
67          input schmitt.
68        $ref: "pinmux-node.yaml"
69
70        properties:
71          pinmux:
72            description: |
73              Integer array, represents gpio pin number and mux setting.
74              Supported pin number and mux varies for different SoCs, and are defined
75              as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
76
77          drive-strength:
78            description: |
79              It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See
80              dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192.
81            enum: [2, 4, 6, 8, 10, 12, 14, 16]
82
83          drive-strength-microamp:
84            enum: [125, 250, 500, 1000]
85
86          bias-pull-down:
87            oneOf:
88              - type: boolean
89                description: normal pull down.
90              - enum: [100, 101, 102, 103]
91                description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_
92                  defines in dt-bindings/pinctrl/mt65xx.h.
93              - enum: [200, 201, 202, 203]
94                description: RSEL pull down type. See MTK_PULL_SET_RSEL_
95                  defines in dt-bindings/pinctrl/mt65xx.h.
96
97          bias-pull-up:
98            oneOf:
99              - type: boolean
100                description: normal pull up.
101              - enum: [100, 101, 102, 103]
102                description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_
103                  defines in dt-bindings/pinctrl/mt65xx.h.
104              - enum: [200, 201, 202, 203]
105                description: RSEL pull up type. See MTK_PULL_SET_RSEL_
106                  defines in dt-bindings/pinctrl/mt65xx.h.
107
108          bias-disable: true
109
110          output-high: true
111
112          output-low: true
113
114          input-enable: true
115
116          input-disable: true
117
118          input-schmitt-enable: true
119
120          input-schmitt-disable: true
121
122        required:
123          - pinmux
124
125        additionalProperties: false
126
127allOf:
128  - $ref: "pinctrl.yaml#"
129
130required:
131  - compatible
132  - reg
133  - interrupts
134  - interrupt-controller
135  - '#interrupt-cells'
136  - gpio-controller
137  - '#gpio-cells'
138  - gpio-ranges
139
140additionalProperties: false
141
142examples:
143  - |
144            #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
145            #include <dt-bindings/interrupt-controller/arm-gic.h>
146            pio: pinctrl@10005000 {
147                    compatible = "mediatek,mt8192-pinctrl";
148                    reg = <0x10005000 0x1000>,
149                          <0x11c20000 0x1000>,
150                          <0x11d10000 0x1000>,
151                          <0x11d30000 0x1000>,
152                          <0x11d40000 0x1000>,
153                          <0x11e20000 0x1000>,
154                          <0x11e70000 0x1000>,
155                          <0x11ea0000 0x1000>,
156                          <0x11f20000 0x1000>,
157                          <0x11f30000 0x1000>,
158                          <0x1000b000 0x1000>;
159                    reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
160                          "iocfg_bl", "iocfg_br", "iocfg_lm",
161                          "iocfg_lb", "iocfg_rt", "iocfg_lt",
162                          "iocfg_tl", "eint";
163                    gpio-controller;
164                    #gpio-cells = <2>;
165                    gpio-ranges = <&pio 0 0 220>;
166                    interrupt-controller;
167                    interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
168                    #interrupt-cells = <2>;
169
170                    spi1-default-pins {
171                            pins-cs-mosi-clk {
172                                    pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
173                                             <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
174                                             <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
175                                    bias-disable;
176                            };
177
178                            pins-miso {
179                                    pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
180                                    bias-pull-down;
181                            };
182                    };
183            };
184