1Marvell 88PM800 regulator
2
3Required properties:
4- compatible: "marvell,88pm800"
5- reg: I2C slave address
6- regulators: A node that houses a sub-node for each regulator within the
7  device. Each sub-node is identified using the node's name (or the deprecated
8  regulator-compatible property if present), with valid values listed below.
9  The content of each sub-node is defined by the standard binding for
10  regulators; see regulator.txt.
11
12The valid names for regulators are:
13
14  buck1, buck2, buck3, buck4, buck5, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7,
15  ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19
16
17Example:
18
19	pmic: 88pm800@31 {
20		compatible = "marvell,88pm800";
21		reg = <0x31>;
22
23		regulators {
24			buck1 {
25			        regulator-min-microvolt = <600000>;
26			        regulator-max-microvolt = <3950000>;
27			        regulator-boot-on;
28			        regulator-always-on;
29			};
30			ldo1 {
31			        regulator-min-microvolt = <600000>;
32			        regulator-max-microvolt = <15000000>;
33			        regulator-boot-on;
34			        regulator-always-on;
35			};
36...
37		};
38	};
39