xref: /freebsd/sys/contrib/device-tree/Bindings/regulator/pv88090.txt (revision c66ec88f)

* Powerventure Semiconductor PV88090 Voltage Regulator

Required properties:
- compatible: "pvs,pv88090".
- reg: I2C slave address, usually 0x48.
- interrupts: the interrupt outputs of the controller
- regulators: A node that houses a sub-node for each regulator within the
  device. Each sub-node is identified using the node's name, with valid
  values listed below. The content of each sub-node is defined by the
  standard binding for regulators; see regulator.txt.
  BUCK1, BUCK2, BUCK3, LDO1, and LDO2.

Optional properties:
- Any optional property defined in regulator.txt

Example

	pmic: pv88090@48 {
		compatible = "pvs,pv88090";
		reg = <0x48>;
		interrupt-parent = <&gpio>;
		interrupts = <24 24>;

		regulators {
			BUCK1 {
				regulator-name = "buck1";
				regulator-min-microvolt = < 600000>;
				regulator-max-microvolt = <1393750>;
				regulator-min-microamp 	= < 220000>;
				regulator-max-microamp 	= <7040000>;
				regulator-boot-on;
			};

			BUCK2 {
				regulator-name = "buck2";
				regulator-min-microvolt = < 600000>;
				regulator-max-microvolt = <1393750>;
				regulator-min-microamp 	= <1496000>;
				regulator-max-microamp 	= <4189000>;
			};

			BUCK3 {
				regulator-name = "buck3";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <1393750>;
				regulator-min-microamp 	= <1496000>;
				regulator-max-microamp 	= <4189000>;
				regulator-boot-on;
			};

			LDO1 {
				regulator-name = "ldo1";
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <4350000>;
				regulator-boot-on;
			};

			LDO2 {
				regulator-name = "ldo2";
				regulator-min-microvolt = < 650000>;
				regulator-max-microvolt = <2225000>;
				regulator-boot-on;
			};
		};
	};